Start 2008-08-30T01:21:40 LIB=C:\PlatSDK\Lib\AMD64;C:\PlatSDK\Lib\AMD64\atlmfc INCLUDE=C:\PlatSDK\Include;C:\PlatSDK\Include\crt;C:\PlatSDK\Include\crt\sys;C:\PlatSDK\Include\mfc;C:\PlatSDK\Include\atl PATH=C:\PlatSDK\Bin\Win64\x86\AMD64;C:\PlatSDK\Bin;C:\PlatSDK\Bin\WinNT;C:\Perl64\site\bin;C:\Perl64\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~2\Perforce\ Going to read C:\cpanfly\var\cpan\Metadata Database was generated on Fri, 29 Aug 2008 11:02:52 GMT Running make for M/MS/MSCHILLI/X10-Home-0.03.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/M/MS/MSCHILLI/X10-Home-0.03.tar.gz Checksum for C:\cpanfly\var\cpan\sources\authors\id\M\MS\MSCHILLI\X10-Home-0.03.tar.gz ok X10-Home-0.03/ X10-Home-0.03/t/ X10-Home-0.03/t/003DB.t X10-Home-0.03/t/002Locks.t X10-Home-0.03/t/001Basic.t X10-Home-0.03/eg/ X10-Home-0.03/eg/x10 X10-Home-0.03/eg/x10.cgi X10-Home-0.03/eg/x10.js X10-Home-0.03/eg/x10.conf X10-Home-0.03/eg/x10.tmpl X10-Home-0.03/Changes X10-Home-0.03/Home.pm X10-Home-0.03/MANIFEST X10-Home-0.03/MANIFEST.SKIP X10-Home-0.03/README X10-Home-0.03/Makefile.PL X10-Home-0.03/META.yml CPAN.pm: Going to build M/MS/MSCHILLI/X10-Home-0.03.tar.gz >>> C:\Perl64\bin\perl.exe Makefile.PL Warning: prerequisite ControlX10::CM11 2.09 not found. Warning: prerequisite ControlX10::CM17 0.07 not found. Warning: prerequisite DB_File 1.815 not found. Warning: prerequisite Device::SerialPort 1 not found. Checking if your kit is complete... Looks good Writing Makefile for X10::Home ---- Unsatisfied dependencies detected during ---- ---- MSCHILLI/X10-Home-0.03.tar.gz ---- ControlX10::CM11 [requires] ControlX10::CM17 [requires] Device::SerialPort [requires] DB_File [requires] Running make test Delayed until after prerequisites Running test for module 'ControlX10::CM11' Running make for B/BB/BBIRTH/ControlX10-CM11-2.09.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/B/BB/BBIRTH/ControlX10-CM11-2.09.tar.gz Checksum for C:\cpanfly\var\cpan\sources\authors\id\B\BB\BBIRTH\ControlX10-CM11-2.09.tar.gz ok ControlX10-CM11-2.09/ ControlX10-CM11-2.09/t/ ControlX10-CM11-2.09/t/test1.t ControlX10-CM11-2.09/MANIFEST ControlX10-CM11-2.09/Makefile.PL ControlX10-CM11-2.09/Changes ControlX10-CM11-2.09/eg/ ControlX10-CM11-2.09/eg/eg_cm11.plx ControlX10-CM11-2.09/README.txt ControlX10-CM11-2.09/CM11.pm ControlX10-CM11-2.09/README CPAN.pm: Going to build B/BB/BBIRTH/ControlX10-CM11-2.09.tar.gz >>> C:\Perl64\bin\perl.exe Makefile.PL ControlX10::CM11 VERSION 2.09 No 'Makefile' will be created Test with: perl test.pl Install with: perl install.pl The Test sends data to the emulator, does not require a CM11 attached Creating new test.pl mkdir ./lib mkdir ./lib/ControlX10 mkdir ./html mkdir ./html/ControlX10 Creating new install.pl No 'Makefile' created BBIRTH/ControlX10-CM11-2.09.tar.gz C:\Perl64\bin\perl.exe Makefile.PL -- NOT OK Running make test Make had some problems, won't test Running test for module 'ControlX10::CM17' Running make for B/BB/BBIRTH/ControlX10-CM17-0.07.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/B/BB/BBIRTH/ControlX10-CM17-0.07.tar.gz Checksum for C:\cpanfly\var\cpan\sources\authors\id\B\BB\BBIRTH\ControlX10-CM17-0.07.tar.gz ok ControlX10-CM17-0.07/ ControlX10-CM17-0.07/eg/ ControlX10-CM17-0.07/eg/eg_cm17.plx ControlX10-CM17-0.07/CM17.pm ControlX10-CM17-0.07/t/ ControlX10-CM17-0.07/t/test1.t ControlX10-CM17-0.07/MANIFEST ControlX10-CM17-0.07/Makefile.PL ControlX10-CM17-0.07/Changes ControlX10-CM17-0.07/README.txt ControlX10-CM17-0.07/README CPAN.pm: Going to build B/BB/BBIRTH/ControlX10-CM17-0.07.tar.gz >>> C:\Perl64\bin\perl.exe Makefile.PL ControlX10::CM17 VERSION 0.07 No 'Makefile' will be created Test with: perl test.pl Install with: perl install.pl The Test sends data to the emulator, does not require a CM17 attached Creating new test.pl mkdir ./lib mkdir ./lib/ControlX10 mkdir ./html mkdir ./html/ControlX10 Creating new install.pl No 'Makefile' created BBIRTH/ControlX10-CM17-0.07.tar.gz C:\Perl64\bin\perl.exe Makefile.PL -- NOT OK Running make test Make had some problems, won't test Running test for module 'Device::SerialPort' Running make for C/CO/COOK/Device-SerialPort-1.04.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/C/CO/COOK/Device-SerialPort-1.04.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/C/CO/COOK/CHECKSUMS Checksum for C:\cpanfly\var\cpan\sources\authors\id\C\CO\COOK\Device-SerialPort-1.04.tar.gz ok Device-SerialPort-1.04/ Device-SerialPort-1.04/modemtest Device-SerialPort-1.04/t/ Device-SerialPort-1.04/t/10basic.t Device-SerialPort-1.04/t/AltPort.pm Device-SerialPort-1.04/t/21inherited-state.t Device-SerialPort-1.04/t/01timing.t Device-SerialPort-1.04/t/11saved-state.t Device-SerialPort-1.04/t/20inherited.t Device-SerialPort-1.04/Device-SerialPort.spec Device-SerialPort-1.04/MANIFEST Device-SerialPort-1.04/configure.ac Device-SerialPort-1.04/Makefile.PL Device-SerialPort-1.04/eg/ Device-SerialPort-1.04/eg/demo3.plx Device-SerialPort-1.04/eg/example1.txt Device-SerialPort-1.04/eg/demo4.plx Device-SerialPort-1.04/eg/demo8.plx Device-SerialPort-1.04/eg/any_os.plx Device-SerialPort-1.04/eg/example2.txt Device-SerialPort-1.04/eg/demo5.plx Device-SerialPort-1.04/eg/demo1.plx Device-SerialPort-1.04/eg/demo2.plx Device-SerialPort-1.04/eg/demo6.plx Device-SerialPort-1.04/eg/example6.txt Device-SerialPort-1.04/eg/example7.txt Device-SerialPort-1.04/eg/example5.txt Device-SerialPort-1.04/eg/example4.txt Device-SerialPort-1.04/eg/options.plx Device-SerialPort-1.04/eg/demo7.plx Device-SerialPort-1.04/eg/example8.txt Device-SerialPort-1.04/eg/example3.txt Device-SerialPort-1.04/README Device-SerialPort-1.04/config.h.in Device-SerialPort-1.04/SerialPort.pm Device-SerialPort-1.04/Changes Device-SerialPort-1.04/SerialPort.xs Device-SerialPort-1.04/TODO Device-SerialPort-1.04/configure Device-SerialPort-1.04/show-tiocm.c.test Device-SerialPort-1.04/META.yml CPAN.pm: Going to build C/CO/COOK/Device-SerialPort-1.04.tar.gz >>> C:\Perl64\bin\perl.exe Makefile.PL To enable serial port tests, use: perl Makefile.PL TESTPORT= where is a specific port or 'auto' to autodetect. Running ./configure ... '.' is not recognized as an internal or external command, operable program or batch file. The 'configure' script didn't like something. It should have told you what went wrong, but you can check 'config.log' for more details. Warning: No success on command[C:\Perl64\bin\perl.exe Makefile.PL] COOK/Device-SerialPort-1.04.tar.gz C:\Perl64\bin\perl.exe Makefile.PL -- NOT OK Running make test Make had some problems, won't test Running test for module 'DB_File' Running make for P/PM/PMQS/DB_File-1.817.tar.gz Checksum for C:\cpanfly\var\cpan\sources\authors\id\P\PM\PMQS\DB_File-1.817.tar.gz ok DB_File-1.817/ DB_File-1.817/dbinfo DB_File-1.817/patches/ DB_File-1.817/patches/5.6.0 DB_File-1.817/patches/5.005_02 DB_File-1.817/patches/5.005_03 DB_File-1.817/patches/5.004_03 DB_File-1.817/patches/5.004_05 DB_File-1.817/patches/5.004_02 DB_File-1.817/patches/5.005_01 DB_File-1.817/patches/5.004_04 DB_File-1.817/patches/5.004_01 DB_File-1.817/patches/5.005 DB_File-1.817/patches/5.004 DB_File-1.817/hints/ DB_File-1.817/hints/sco.pl DB_File-1.817/hints/dynixptx.pl DB_File-1.817/t/ DB_File-1.817/t/db-btree.t DB_File-1.817/t/db-recno.t DB_File-1.817/t/pod.t DB_File-1.817/t/db-hash.t DB_File-1.817/Changes DB_File-1.817/DB_File_BS DB_File-1.817/fallback.h DB_File-1.817/MANIFEST DB_File-1.817/typemap DB_File-1.817/ppport.h DB_File-1.817/DB_File.xs DB_File-1.817/META.yml DB_File-1.817/config.in DB_File-1.817/DB_File.pm DB_File-1.817/version.c DB_File-1.817/fallback.xs DB_File-1.817/README DB_File-1.817/Makefile.PL CPAN.pm: Going to build P/PM/PMQS/DB_File-1.817.tar.gz >>> C:\Perl64\bin\perl.exe Makefile.PL Parsing config.in... Looks Good. Checking if your kit is complete... Looks good Note (probably harmless): No library found for -llibdb Writing Makefile for DB_File >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp DB_File.pm blib\lib\DB_File.pm AutoSplitting blib\lib\DB_File.pm (blib\lib\auto\DB_File) cl -c -I/usr/local/BerkeleyDB/include -nologo -GF -W3 -MD -Zi -DNDEBUG -Ox -GL -Wp64 -fp:precise -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DWIN64 -DCONSERVATIVE -DUSE_SITECUSTOMIZE -DPRIVLIB_LAST_IN_INC -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX -MD -Zi -DNDEBUG -Ox -GL -Wp64 -fp:precise -DVERSION=\"1.817\" -DXS_VERSION=\"1.817\" "-IC:\Perl64\lib\CORE" -D_NOT_CORE -DmDB_Prefix_t=size_t -DmDB_Hash_t=u_int32_t version.c version.c version.c(30) : fatal error C1083: Cannot open include file: 'db.h': No such file or directory NMAKE : fatal error U1077: 'cl' : return code '0x2' Stop. PMQS/DB_File-1.817.tar.gz nmake -- NOT OK Running make test Can't test without successful make Running make for M/MS/MSCHILLI/X10-Home-0.03.tar.gz Has already been unwrapped into directory C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu CPAN.pm: Going to build M/MS/MSCHILLI/X10-Home-0.03.tar.gz Warning: Prerequisite 'ControlX10::CM11 => 2.09' for 'MSCHILLI/X10-Home-0.03.tar.gz' failed when processing 'BBIRTH/ControlX10-CM11-2.09.tar.gz' with 'writemakefile => NO -- No 'Makefile' created '. Continuing, but chances to succeed are limited. Warning: Prerequisite 'ControlX10::CM17 => 0.07' for 'MSCHILLI/X10-Home-0.03.tar.gz' failed when processing 'BBIRTH/ControlX10-CM17-0.07.tar.gz' with 'writemakefile => NO -- No 'Makefile' created '. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Device::SerialPort => 1' for 'MSCHILLI/X10-Home-0.03.tar.gz' failed when processing 'COOK/Device-SerialPort-1.04.tar.gz' with 'writemakefile => NO 'C:\Perl64\bin\perl.exe Makefile.PL' returned status 512'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'DB_File => 1.815' for 'MSCHILLI/X10-Home-0.03.tar.gz' failed when processing 'PMQS/DB_File-1.817.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited. >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp Home.pm blib\lib\X10\Home.pm C:\Perl64\bin\perl.exe -MExtUtils::Command -e cp eg/x10 blib\script\x10 pl2bat.bat blib\script\x10 MSCHILLI/X10-Home-0.03.tar.gz nmake -- OK Running make test >>> nmake test TEST_VERBOSE=1 Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. C:\Perl64\bin\perl.exe -MExtUtils::Command -e cp eg/x10 blib\script\x10 pl2bat.bat blib\script\x10 C:\Perl64\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t t/001Basic....Can't locate Device/SerialPort.pm in @INC (@INC contains: C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\arch C:/cpanfly/var/megalib C:/Perl64/site/lib C:/Perl64/lib .) at C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib/X10/Home.pm line 8. BEGIN failed--compilation aborted at C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib/X10/Home.pm line 8. Compilation failed in require at t/001Basic.t line 12. BEGIN failed--compilation aborted at t/001Basic.t line 12. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/002Locks....Can't locate Device/SerialPort.pm in @INC (@INC contains: C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\arch C:/cpanfly/var/megalib C:/Perl64/site/lib C:/Perl64/lib .) at C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib/X10/Home.pm line 8. BEGIN failed--compilation aborted at C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib/X10/Home.pm line 8. Compilation failed in require at t/002Locks.t line 8. BEGIN failed--compilation aborted at t/002Locks.t line 8. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/003DB.......Can't locate Device/SerialPort.pm in @INC (@INC contains: C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\arch C:/cpanfly/var/megalib C:/Perl64/site/lib C:/Perl64/lib .) at C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib/X10/Home.pm line 8. BEGIN failed--compilation aborted at C:\cpanfly\var\cpan\build\X10-Home-0.03-N0XkHu\blib\lib/X10/Home.pm line 8. Compilation failed in require at t/003DB.t line 8. BEGIN failed--compilation aborted at t/003DB.t line 8. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Test Summary Report ------------------- t/001Basic (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/002Locks (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/003DB (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=3, Tests=0, 2 wallclock secs ( 0.03 usr + 0.05 sys = 0.08 CPU) Result: FAIL Failed 3/3 test programs. 0/0 subtests failed. NMAKE : fatal error U1077: 'C:\Perl64\bin\perl.exe' : return code '0x2' Stop. MSCHILLI/X10-Home-0.03.tar.gz nmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports MSCHILLI/X10-Home-0.03.tar.gz Finished 2008-08-30T01:22:12