PATH=C:\mingw\bin;C:\cpanfly-5.18\var\megalib\bin;C:\Perl64-5.18\site\bin;C:\Perl64-5.18\bin;C:\cygwin\bin;C:\mingw\bin;C:\cpanfly-5.18\var\megalib\bin;C:\Perl64-5.18\site\bin;C:\Perl64-5.18\bin;C:\cygwin\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files (x86)\Git\cmd;C:\Program Files (x86)\CMake\bin;C:\instantclient_11_2 Start 2016-03-13T05:30:11 ActivePerl-1805 CPAN-2.10 PATH=C:/CPANFL~1.18/var/libs/bin;C:\mingw\bin;C:\CPANFL~1.18\var\megalib\bin;C:\Perl64-5.18\site\bin;C:\Perl64-5.18\bin;C:\cygwin\bin;C:\mingw\bin;C:\CPANFL~1.18\var\megalib\bin;C:\Perl64-5.18\site\bin;C:\Perl64-5.18\bin;C:\cygwin\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~1\v1.0;C:\PROGRA~2\Git\cmd;C:\PROGRA~2\CMake\bin;C:\INSTAN~1 Reading 'C:\cpanfly-5.18\var\cpan\Metadata' Database was generated on Sun, 13 Mar 2016 06:17:02 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/E/ET/ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\E\ET\ETHER\Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz ok Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/Build.PL Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/Changes Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/CONTRIBUTING Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/dist.ini Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/INSTALL Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/lib/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/LICENCE Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/Makefile.PL Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/MANIFEST Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/META.json Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/META.yml Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/README Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/changes_has_content.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/cpan-changes.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/distmeta.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/minimum-version.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/pod-no404s.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/release/portability.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/00-compile.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/clean-namespaces.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/eol.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/kwalitee.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/mojibake.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/no-tabs.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/pod-coverage.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/pod-spell.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/xt/author/pod-syntax.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/00-report-prereqs.dd Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/00-report-prereqs.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/01-basic.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/02-perl-normalization.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/03-dump-config.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/04-overrides.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/05-simple-configs.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/06-delimiter-whitespace.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/07-authors.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/08-version-ranges.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/09-missing-file.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/10-content-from-file.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/t/zzz-check-breaks.t Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/lib/Dist/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/lib/Dist/Zilla/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/lib/Dist/Zilla/Plugin/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/lib/Dist/Zilla/Plugin/MakeMaker/ Dist-Zilla-Plugin-MakeMaker-Awesome-0.36/lib/Dist/Zilla/Plugin/MakeMaker/Awesome.pm Configuring E/ET/ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz with Makefile.PL >>> C:\Perl64-5.18\bin\perl.exe Makefile.PL Checking if your kit is complete... Looks good Have \cpanfl~1.18\var\megalib Want \perl64-5.18\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for Dist::Zilla::Plugin::MakeMaker::Awesome Writing MYMETA.yml and MYMETA.json ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz C:\Perl64-5.18\bin\perl.exe Makefile.PL -- OK Running make for E/ET/ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz >>> dmake cp lib/Dist/Zilla/Plugin/MakeMaker/Awesome.pm blib\lib\Dist\Zilla\Plugin\MakeMaker\Awesome.pm ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz dmake -- OK Running make test >>> dmake test TEST_VERBOSE=1 C:\Perl64-5.18\bin\perl.exe "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t # # Versions for all modules listed in MYMETA.json (including optional ones): # # === Configure Requires === # # Module Want Have # ------------------- ----- ----- # Module::Build::Tiny 0.034 0.039 # # === Build Requires === # # Module Want Have # ------------------- ---- ---- # ExtUtils::MakeMaker any 6.98 # # === Test Requires === # # Module Want Have # ------------------------ ----- -------- # CPAN::Meta::Check 0.011 0.012 # CPAN::Meta::Requirements 2.121 2.140 # ExtUtils::MakeMaker any 6.98 # File::Spec any 3.62 # File::pushd any 1.009 # Test::DZil any 5.043 # Test::Deep any 1.120 # Test::Fatal any 0.014 # Test::More 0.88 1.001014 # if any 0.0606 # strict any 1.07 # warnings any 1.18 # # === Test Recommends === # # Module Want Have # ---------- -------- -------- # CPAN::Meta 2.120900 2.150005 # # === Runtime Requires === # # Module Want Have # ------------------------------- -------- ------ # CPAN::Meta::Requirements 2.121 2.140 # Dist::Zilla 4.300039 5.043 # Dist::Zilla::File::InMemory any 5.043 # Dist::Zilla::Plugin::MakeMaker 5.001 5.043 # Dist::Zilla::Role::FileGatherer any 5.043 # List::Util 1.29 1.43 # Moose any 2.1605 # MooseX::Types::Moose any 0.46 # MooseX::Types::Stringlike any 0.003 # Path::Tiny any 0.084 # namespace::autoclean any 0.28 # version any 0.9912 # # === Other Modules === # # Module Have # --------------------- -------- # CPAN::Meta::Validator 2.150005 # Dist::CheckConflicts 0.11 # Pod::Coverage 0.23 # t/00-report-prereqs.t ........ 1..1 ok 1 ok Warning: prerequisite Builder::Bob 9.901 not found. Warning: prerequisite Foo::Bar 1.20 not found. t/01-basic.t ................. ok 1 - correct makemaker args generated ok 2 - no trailing whitespace in generated file ok 3 - Makefile.PL header looks correct ok 4 - arguments are dumped to Makefile.PL ok 5 - plugin metadata, including dumped configs # Subtest: run the generated Makefile.PL Have \cpanfl~1.18\var\megalib Want \perl64-5.18\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for DZT::Sample Writing MYMETA.yml and MYMETA.json cp lib/DZT/Sample.pm blib\lib\DZT\Sample.pm ok 1 - Makefile.PL can be run successfully 1..1 ok 6 - run the generated Makefile.PL 1..6 ok t/02-perl-normalization.t .... ok 1 - normalized the perl version needed 1..1 ok t/03-dump-config.t ........... ok 1 - config is properly included in metadata 1..1 ok WARNING: _IGNORE is not a known parameter. t/04-overrides.t ............. ok 1 - _build_MakeFile_PL_template hook called ok 2 - _build_WriteMakefile_args hook called ok 3 - _build_WriteMakefile_dump hook called ok 4 - _build_test_files hook called ok 5 - _build_exe_files hook called # Subtest: run the generated Makefile.PL '_IGNORE' is not a known MakeMaker parameter name. Have \cpanfl~1.18\var\megalib Want \perl64-5.18\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for DZT::Sample Writing MYMETA.yml and MYMETA.json cp lib/DZT/Sample.pm blib\lib\DZT\Sample.pm C:\Perl64-5.18\bin\perl.exe -MExtUtils::Command -e cp -- bin/hello-world blib\script\hello-world pl2bat.bat blib\script\hello-world ok 1 - Makefile.PL can be run successfully 1..1 ok 6 - run the generated Makefile.PL 1..6 ok t/05-simple-configs.t ........ ok 1 - header appears right after "use" line ok 2 - test_files were set ok 3 - exe files were set ok 4 - additional WriteMakefile argument is set ok 5 - footer appears right before the end of the file # Subtest: run the generated Makefile.PL Have \cpanfl~1.18\var\megalib Want \perl64-5.18\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for DZT::Sample Writing MYMETA.yml and MYMETA.json cp lib/DZT/Sample.pm blib\lib\DZT\Sample.pm C:\Perl64-5.18\bin\perl.exe -MExtUtils::Command -e cp -- bin/hello-world blib\script\hello-world pl2bat.bat blib\script\hello-world ok 1 - Makefile.PL can be run successfully 1..1 ok 6 - run the generated Makefile.PL 1..6 ok t/06-delimiter-whitespace.t .. ok 1 - header appears as normal, not munged ok 2 - additional WriteMakefile argument is set, unmunged ok 3 - MY::postamble appears right before the end of the file # Subtest: run the generated Makefile.PL Have \cpanfl~1.18\var\megalib Want \perl64-5.18\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for DZT::Sample Writing MYMETA.yml and MYMETA.json cp lib/DZT/Sample.pm blib\lib\DZT\Sample.pm ok 1 - Makefile.PL can be run successfully 1..1 ok 4 - run the generated Makefile.PL 1..4 ok t/07-authors.t ............... ok 1 - AUTHOR generated as a listref, when perl version already accomodates the ExtUtils::MakeMaker version ok 2 - minimum EUMM version is set accordingly ok 3 - AUTHOR generated as a listref, when eumm_version already accomodates the requirement ok 4 - ExtUtils::MakeMaker prereq matches eumm_version ok 5 - AUTHOR generated as string, not listref ok 6 - minimum EUMM version is still zero, when we cannot justify raising it just for the listref AUTHOR feature 1..6 ok t/08-version-ranges.t ........ ok 1 - got warning about probably-unparsable version range 1..1 ok t/09-missing-file.t .......... ok 1 - gave a helpful error when Makefile.PL was pruned 1..1 ok t/10-content-from-file.t ..... ok 1 - no trailing whitespace in generated file ok 2 - content of header file appears right after "use" line ok 3 - content of footer file appears right before the end of the file # Subtest: run the generated Makefile.PL Have \cpanfl~1.18\var\megalib Want \perl64-5.18\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for DZT::Sample Writing MYMETA.yml and MYMETA.json cp lib/DZT/Sample.pm blib\lib\DZT\Sample.pm ok 1 - Makefile.PL can be run successfully 1..1 ok 4 - run the generated Makefile.PL 1..4 ok t/zzz-check-breaks.t ......... 1..1 ok 1 - conflicts checked via Moose::Conflicts ok All tests successful. Files=12, Tests=38, 39 wallclock secs ( 0.11 usr + 0.02 sys = 0.13 CPU) Result: PASS ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz dmake test TEST_VERBOSE=1 -- OK Karen Etheridge <ether@cpan.org> A more awesome MakeMaker plugin for L<Dist::Zilla> >>> (cd C:\cpanfly-5.18\var\cpan\build\Dist-Zilla-Plugin-MakeMaker-Awesome-0.36-OfS5Gz && tar cvf - Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.ppd blib) | gzip -c >C:/cpanfly-5.18/var/REPO/E/ET/ETHER/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.tar.gz Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.ppd blib/ blib/lib/ blib/lib/Dist/ blib/lib/Dist/Zilla/ blib/lib/Dist/Zilla/Plugin/ blib/lib/Dist/Zilla/Plugin/MakeMaker/ blib/lib/Dist/Zilla/Plugin/MakeMaker/Awesome.pm >>> mv C:\cpanfly-5.18\var\cpan\build\Dist-Zilla-Plugin-MakeMaker-Awesome-0.36-OfS5Gz/Dist-Zilla-Plugin-MakeMaker-Awesome-0.36.ppd C:/cpanfly-5.18/var/REPO/E/ET/ETHER Finished 2016-03-13T05:31:02