PATH=C:\mingw\bin;C:\cygwin\bin;C:\cpanfly-5.18\var\megalib\bin;C:\Perl64-5.18\site\bin;C:\Perl64-5.18\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\PROGRA~2\Perforce;C:\instantclient_11_2;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\PROGRA~2\Perforce;C:\mysql\bin
Start 2015-01-15T04:58:06
ActivePerl-1800 CPAN-2.00
PATH=C:/CPANFL~1.18/var/libs/bin;C:\mingw\bin;C:\cygwin\bin;C:\CPANFL~1.18\var\megalib\bin;C:\Perl64-5.18\site\bin;C:\Perl64-5.18\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~1\v1.0;C:\PROGRA~2\Perforce;C:\INSTAN~1;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~1\v1.0;C:\PROGRA~2\Perforce;C:\mysql\bin
Reading 'C:\cpanfly-5.18\var\cpan\Metadata'
Database was generated on Thu, 15 Jan 2015 11:53:19 GMT
Running make for T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/T/TM/TMURRAY/CHECKSUMS
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\T\TM\TMURRAY\Device-WebIO-RaspberryPi-0.008.tar.gz ok
Device-WebIO-RaspberryPi-0.008
Device-WebIO-RaspberryPi-0.008/TODO
Device-WebIO-RaspberryPi-0.008/dist.ini
Device-WebIO-RaspberryPi-0.008/MANIFEST
Device-WebIO-RaspberryPi-0.008/CHANGELOG
Device-WebIO-RaspberryPi-0.008/README.md
Device-WebIO-RaspberryPi-0.008/META.json
Device-WebIO-RaspberryPi-0.008/t
Device-WebIO-RaspberryPi-0.008/t/002_pod.t
Device-WebIO-RaspberryPi-0.008/Makefile.PL
Device-WebIO-RaspberryPi-0.008/t/001_load.t
Device-WebIO-RaspberryPi-0.008/examples
Device-WebIO-RaspberryPi-0.008/examples/blink.pl
Device-WebIO-RaspberryPi-0.008/examples/tmp102.pl
Device-WebIO-RaspberryPi-0.008/examples/picture.pl
Device-WebIO-RaspberryPi-0.008/examples/switch_input.pl
Device-WebIO-RaspberryPi-0.008/examples/video_stream.pl
Device-WebIO-RaspberryPi-0.008/lib/Device/WebIO
Device-WebIO-RaspberryPi-0.008/lib/Device/WebIO/RaspberryPi.pm
CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
Warning: prerequisite Device::WebIO 0.009 not found. We have 0.008.
Warning: prerequisite GStreamer1 0.002 not found.
Warning: prerequisite HiPi 0 not found.
Checking if your kit is complete...
Looks good
Generating a dmake-style Makefile
Writing Makefile for Device::WebIO::RaspberryPi
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz ----
Device::WebIO [requires]
HiPi [requires]
GStreamer1 [requires]
Running make test
Delayed until after prerequisites
Running test for module 'Device::WebIO'
Running make for T/TM/TMURRAY/Device-WebIO-0.009.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/T/TM/TMURRAY/Device-WebIO-0.009.tar.gz
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\T\TM\TMURRAY\Device-WebIO-0.009.tar.gz ok
Device-WebIO-0.009/
Device-WebIO-0.009/MANIFEST
Device-WebIO-0.009/lib/
Device-WebIO-0.009/lib/Device/
Device-WebIO-0.009/lib/Device/WebIO.pm
Device-WebIO-0.009/lib/Device/WebIO/
Device-WebIO-0.009/lib/Device/WebIO/Device.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/
Device-WebIO-0.009/lib/Device/WebIO/Device/PWM.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/VideoOutput.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/I2CUser.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/DigitalInputCallback.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/OneWire.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/Serial.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/I2CProvider.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/StillImageOutput.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/SPI.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/VideoOutputCallback.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/TempSensor.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/DigitalInput.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/DigitalOutput.pm
Device-WebIO-0.009/lib/Device/WebIO/Device/ADC.pm
Device-WebIO-0.009/lib/Device/WebIO/Exceptions.pm
Device-WebIO-0.009/examples/
Device-WebIO-0.009/examples/rpi_firmata_link_blink.pl
Device-WebIO-0.009/META.json
Device-WebIO-0.009/LICENSE
Device-WebIO-0.009/t_data/
Device-WebIO-0.009/t_data/test.jpg
Device-WebIO-0.009/t_data/wumpus_video_dump.h264
Device-WebIO-0.009/TODO
Device-WebIO-0.009/README
Device-WebIO-0.009/CHANGELOG
Device-WebIO-0.009/Makefile.PL
Device-WebIO-0.009/dist.ini
Device-WebIO-0.009/t/
Device-WebIO-0.009/t/030_adc_input.t
Device-WebIO-0.009/t/lib/
Device-WebIO-0.009/t/lib/MockVideoOutput.pm
Device-WebIO-0.009/t/lib/MockDigitalInputCallback.pm
Device-WebIO-0.009/t/lib/MockADCInput.pm
Device-WebIO-0.009/t/lib/MockPWMOutput.pm
Device-WebIO-0.009/t/lib/MockDigitalInput.pm
Device-WebIO-0.009/t/lib/MockTempSensor.pm
Device-WebIO-0.009/t/lib/MockDigitalInputOutput.pm
Device-WebIO-0.009/t/lib/MockDigitalOutput.pm
Device-WebIO-0.009/t/lib/MockVideoOutputCallback.pm
Device-WebIO-0.009/t/lib/MockStillImageOutput.pm
Device-WebIO-0.009/t/lib/MockI2CUser.pm
Device-WebIO-0.009/t/lib/MockI2CProvider.pm
Device-WebIO-0.009/t/lib/MockSPI.pm
Device-WebIO-0.009/t/100_temp_sensors.t
Device-WebIO-0.009/t/080_still_image_output.t
Device-WebIO-0.009/t/040_pwm_output.t
Device-WebIO-0.009/t/010_digital_input.t
Device-WebIO-0.009/t/110_digital_input_callback.t
Device-WebIO-0.009/t/060_video_output.t
Device-WebIO-0.009/t/001_load.t
Device-WebIO-0.009/t/090_i2c.t
Device-WebIO-0.009/t/130_spi.t
Device-WebIO-0.009/t/200_two_types_one_obj.t
Device-WebIO-0.009/t/120_video_output_callback.t
Device-WebIO-0.009/t/070_description.t
Device-WebIO-0.009/t/020_digital_output.t
Device-WebIO-0.009/t/002_pod.t
CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-0.009.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Generating a dmake-style Makefile
Writing Makefile for Device::WebIO
Writing MYMETA.yml and MYMETA.json
>>> dmake
cp lib/Device/WebIO/Device/I2CProvider.pm blib\lib\Device\WebIO\Device\I2CProvider.pm
cp lib/Device/WebIO/Device/VideoOutputCallback.pm blib\lib\Device\WebIO\Device\VideoOutputCallback.pm
cp lib/Device/WebIO/Device/VideoOutput.pm blib\lib\Device\WebIO\Device\VideoOutput.pm
cp lib/Device/WebIO/Device/Serial.pm blib\lib\Device\WebIO\Device\Serial.pm
cp lib/Device/WebIO/Device/TempSensor.pm blib\lib\Device\WebIO\Device\TempSensor.pm
cp lib/Device/WebIO/Device/DigitalOutput.pm blib\lib\Device\WebIO\Device\DigitalOutput.pm
cp lib/Device/WebIO/Device.pm blib\lib\Device\WebIO\Device.pm
cp lib/Device/WebIO/Device/ADC.pm blib\lib\Device\WebIO\Device\ADC.pm
cp lib/Device/WebIO/Device/I2CUser.pm blib\lib\Device\WebIO\Device\I2CUser.pm
cp lib/Device/WebIO.pm blib\lib\Device\WebIO.pm
cp lib/Device/WebIO/Device/OneWire.pm blib\lib\Device\WebIO\Device\OneWire.pm
cp lib/Device/WebIO/Device/SPI.pm blib\lib\Device\WebIO\Device\SPI.pm
cp lib/Device/WebIO/Device/PWM.pm blib\lib\Device\WebIO\Device\PWM.pm
cp lib/Device/WebIO/Device/StillImageOutput.pm blib\lib\Device\WebIO\Device\StillImageOutput.pm
cp lib/Device/WebIO/Device/DigitalInput.pm blib\lib\Device\WebIO\Device\DigitalInput.pm
cp lib/Device/WebIO/Device/DigitalInputCallback.pm blib\lib\Device\WebIO\Device\DigitalInputCallback.pm
cp lib/Device/WebIO/Exceptions.pm blib\lib\Device\WebIO\Exceptions.pm
TMURRAY/Device-WebIO-0.009.tar.gz
dmake -- OK
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl64-5.18\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/001_load.t ....................
1..14
ok 1 - use Device::WebIO::Exceptions;
ok 2 - use Device::WebIO;
ok 3 - use Device::WebIO::Device;
ok 4 - use Device::WebIO::Device::DigitalInput;
ok 5 - use Device::WebIO::Device::DigitalOutput;
ok 6 - use Device::WebIO::Device::DigitalInputCallback;
ok 7 - use Device::WebIO::Device::ADC;
ok 8 - use Device::WebIO::Device::PWM;
ok 9 - use Device::WebIO::Device::SPI;
ok 10 - use Device::WebIO::Device::I2CProvider;
ok 11 - use Device::WebIO::Device::I2CUser;
ok 12 - use Device::WebIO::Device::Serial;
ok 13 - use Device::WebIO::Device::OneWire;
ok 14 - use Device::WebIO::Device::VideoOutput;
ok
t/002_pod.t .....................
1..17
ok 1 - POD test for lib/Device/WebIO.pm
ok 2 - POD test for lib/Device/WebIO/Device.pm
ok 3 - POD test for lib/Device/WebIO/Exceptions.pm (no pod)
ok 4 - POD test for lib/Device/WebIO/Device/ADC.pm
ok 5 - POD test for lib/Device/WebIO/Device/DigitalInput.pm
ok 6 - POD test for lib/Device/WebIO/Device/DigitalInputCallback.pm
ok 7 - POD test for lib/Device/WebIO/Device/DigitalOutput.pm
ok 8 - POD test for lib/Device/WebIO/Device/I2CProvider.pm
ok 9 - POD test for lib/Device/WebIO/Device/I2CUser.pm
ok 10 - POD test for lib/Device/WebIO/Device/OneWire.pm (no pod)
ok 11 - POD test for lib/Device/WebIO/Device/PWM.pm (no pod)
ok 12 - POD test for lib/Device/WebIO/Device/Serial.pm (no pod)
ok 13 - POD test for lib/Device/WebIO/Device/SPI.pm
ok 14 - POD test for lib/Device/WebIO/Device/StillImageOutput.pm
ok 15 - POD test for lib/Device/WebIO/Device/TempSensor.pm
ok 16 - POD test for lib/Device/WebIO/Device/VideoOutput.pm
ok 17 - POD test for lib/Device/WebIO/Device/VideoOutputCallback.pm
ok
t/010_digital_input.t ...........
1..12
ok 1 - Does Device role
ok 2 - Does DigitalInput role
ok 3 - Pin 0 set as input
ok 4 - Pin 1 set as input
ok 5 - Pin 2 not set as input
ok 6 - Input 0 on pin 0
ok 7 - Input 1 on pin 1
ok 8 - Fetch pin count
ok 9 - Read whole port
ok 10 - Caught exception for using too high a pin for set_as_input()
ok 11 - Caught exception for using too high a pin for digital_input()
ok 12 - Caught exception for using an output function on an input-only object
ok
t/020_digital_output.t ..........
1..13
ok 1 - Does Device role
ok 2 - Does DigitalOutput role
ok 3 - Pin 0 set as output
ok 4 - Pin 1 set as output
ok 5 - Pin 2 not set as output
ok 6 - Output 0 on pin 0
ok 7 - Output 1 on pin 1
ok 8 - Fetch pin count
ok 9 - Port write pin 0
ok 10 - Port write pin 5
ok 11 - Caught exception for using too high a pin on set_as_output()
ok 12 - Caught exception for using too high a pin on digital_output()
ok 13 - Caught exception for using an input function on an output-only object
ok
t/030_adc_input.t ...............
1..20
ok 1 - Does Device role
ok 2 - Does ADC role
ok 3 - Pin count
ok 4 - Bit resolution pin 0
ok 5 - Max int pin 0
ok 6 - Volt reference pin 0
ok 7 - Bit resolution pin 2
ok 8 - Max int pin 2
ok 9 - Volt reference pin 2
ok 10 - ADC pin 0 set
ok 11 - ADC pin 1 set
ok 12 - ADC pin 2 set
ok 13 - ADC pin 0 float
ok 14 - ADC pin 2 float
ok 15 - ADC pin 0 volts
ok 16 - ADC pin 2 volts
ok 17 - Caught exception for using too high a pin for adc_input_int()
ok 18 - Caught exception for using too high a pin for adc_input_float()
ok 19 - Caught exception for using too high a pin for adc_input_volts()
ok 20 - Caught exception for using a digital output function on an adc-only object
ok
t/040_pwm_output.t ..............
1..13
ok 1 - Does Device role
ok 2 - Does PWM role
ok 3 - Pin count
ok 4 - Bit resolution pin 0
ok 5 - Max int pin 0
ok 6 - Bit resolution pin 0
ok 7 - Max int pin 0
ok 8 - PWM pin 0 set
ok 9 - PWM pin 1 set
ok 10 - PWM pin 2 set
ok 11 - Caught exception for using too high a pin for pwm_output_int()
ok 12 - Caught exception for using too high a pin for pwm_output_float()
ok 13 - Caught exception for using a digital output function on a pwm-only object
ok
Smartmatch is experimental at t/060_video_output.t line 60.
t/060_video_output.t ............
1..13
ok 1 - Does Device role
ok 2 - Does VideoOutput role
ok 3 - Channel count
ok 4 - Width
ok 5 - Height
ok 6 - FPS
ok 7 - Kbps
ok 8 - Width
ok 9 - Height
ok 10 - FPS
ok 11 - Kbps
ok 12 - Content-type video/h264 is allowed
ok 13 - Got video stream
ok
t/070_description.t .............
1..3
ok 1
ok 2
ok 3
ok
Smartmatch is experimental at t/080_still_image_output.t line 51.
t/080_still_image_output.t ......
1..9
ok 1 - Channel count
ok 2 - Width
ok 3 - Height
ok 4 - Quality
ok 5 - Width
ok 6 - Height
ok 7 - Quality
ok 8 - Content-type image/jpeg is allowed
ok 9 - Got video stream
ok
t/090_i2c.t .....................
1..2
ok 1 - Set/get first register
ok 2 - Set/get second register
ok
t/100_temp_sensors.t ............
1..6
ok 1 - Got temp in celsius
ok 2 - Got temp in kelvins
ok 3 - Got temp in fahrenheit
ok 4 - Got temp in celsius
ok 5 - Got temp in kelvins
ok 6 - Got temp in fahrenheit
ok
t/110_digital_input_callback.t ..
1..16
ok 1 - Does Device role
ok 2 - Does DigitalInputCallback role
ok 3 - Pin 0 set as input
ok 4 - Pin 1 set as input
ok 5 - Pin 2 set as input
ok 6 - Pin 3 set as input
ok 7 - Fetch pin count
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16 - Began loop
ok
t/120_video_output_callback.t ...
1..5
ok 1 - Does Device role
ok 2 - Does VideoOutput role
ok 3 - Does VideoOutputCallback role
ok 4 - Called callback
ok 5 - Begin loop
ok
t/130_spi.t .....................
1..3
ok 1 - Set speed
ok 2 - Read data
ok 3 - Write data
ok
t/200_two_types_one_obj.t .......
1..12
ok 1 - Does DigitalInput role
ok 2 - Does DigitalOutput role
ok 3 - Input pin count
ok 4 - Output pin count
ok 5 - Pin 0 set as input
ok 6 - Pin 1 set as output
ok 7 - Input 1 on pin 0
ok 8 - Output 1 on pin 1
ok 9 - Read whole port
ok 10 - Port write pin 0
ok 11 - Port write pin 5
ok 12 - Caught exception for using too high a pin on set_as_output()
ok
All tests successful.
Files=15, Tests=158, 4 wallclock secs ( 0.09 usr + 0.05 sys = 0.14 CPU)
Result: PASS
TMURRAY/Device-WebIO-0.009.tar.gz
dmake test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
Timm Murray <tmurray@wumpus-cave.net>
Duct Tape for the Internet of Things
>>> (cd C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX && tar cvf - Device-WebIO-0.009.ppd blib) | gzip -c >C:/cpanfly-5.18/var/REPO/T/TM/TMURRAY/Device-WebIO-0.009.tar.gz
Device-WebIO-0.009.ppd
blib/
blib/lib/
blib/lib/Device/
blib/lib/Device/WebIO/
blib/lib/Device/WebIO/Device/
blib/lib/Device/WebIO/Device/ADC.pm
blib/lib/Device/WebIO/Device/DigitalInput.pm
blib/lib/Device/WebIO/Device/DigitalInputCallback.pm
blib/lib/Device/WebIO/Device/DigitalOutput.pm
blib/lib/Device/WebIO/Device/I2CProvider.pm
blib/lib/Device/WebIO/Device/I2CUser.pm
blib/lib/Device/WebIO/Device/OneWire.pm
blib/lib/Device/WebIO/Device/PWM.pm
blib/lib/Device/WebIO/Device/Serial.pm
blib/lib/Device/WebIO/Device/SPI.pm
blib/lib/Device/WebIO/Device/StillImageOutput.pm
blib/lib/Device/WebIO/Device/TempSensor.pm
blib/lib/Device/WebIO/Device/VideoOutput.pm
blib/lib/Device/WebIO/Device/VideoOutputCallback.pm
blib/lib/Device/WebIO/Device.pm
blib/lib/Device/WebIO/Exceptions.pm
blib/lib/Device/WebIO.pm
>>> mv C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/Device-WebIO-0.009.ppd C:/cpanfly-5.18/var/REPO/T/TM/TMURRAY
Running test for module 'HiPi'
Running make for M/MD/MDOOTSON/HiPi-0.33.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\M\MD\MDOOTSON\HiPi-0.33.tar.gz ok
HiPi-0.33
HiPi-0.33/MANIFEST
HiPi-0.33/Wiring.xs
HiPi-0.33/BCM2835.xs
HiPi-0.33/META.yml
HiPi-0.33/README
HiPi-0.33/typemap
HiPi-0.33/Utils.xs
HiPi-0.33/Exec.xs
HiPi-0.33/Changes
HiPi-0.33/COPYING
HiPi-0.33/Build.PL
HiPi-0.33/INSTALL
HiPi-0.33/SPI.xs
HiPi-0.33/I2C.xs
HiPi-0.33/META.json
HiPi-0.33/inc
HiPi-0.33/inc/buildexecs.pl
HiPi-0.33/inc/installwx.pl
HiPi-0.33/inc/Module
HiPi-0.33/inc/Module/Build
HiPi-0.33/inc/Module/Build/HiPi.pm
HiPi-0.33/mylib
HiPi-0.33/mylib/include
HiPi-0.33/mylib/include/ppport.h
HiPi-0.33/mylib/include/local-i2c-dev.h
HiPi-0.33/mylib/auto
HiPi-0.33/mylib/auto/share
HiPi-0.33/mylib/auto/share/dist
HiPi-0.33/mylib/auto/share/dist/HiPi
HiPi-0.33/mylib/auto/share/dist/HiPi/help
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_example_derived.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_example_mixed.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/overview.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_w1dev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/command_line_utils_i2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_hipi_interrupt_handler.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_gpio.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/wiringpipatch.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_base.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controli2cdev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/back.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_spidev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mpl3115a2.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control-app.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_onewire.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/command_line_utils.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp23017.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_lang.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/release_notes.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_wiring.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipicontrol.hhp
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_hipi_interrupt_message.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_overview.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlinfo.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_raspberrypi.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_gpiopins.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp3008.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_info.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/contents.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_hipi_interrupt.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_htbackpackv2.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_gpiodev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_constant.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_gpio_device.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/helpp5.JPG
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlw1dev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_gpio_1.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/forward.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_gpio_5.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_hd44780.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipi-bcm2835-pin.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/nanoblacklist.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlgpio1.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_example_callback.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/modelap5.JPG
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipi-device-gpio-pin.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlgpiodev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_htadci2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_spi.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_i2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipicontrol.hhc
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_gpio.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_w1dev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/nanomodules.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlspidev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipicontrol.hhk
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_i2cdev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_ds18x20.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/installation.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/home.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/license.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_serlcd.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_load_drivers_startup.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_bcm2835.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio_bcm2835_i2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp49xx.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipi-pin.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlgpio5.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp3004.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_gpiopins_rev1.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_i2cbus_2.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_serialport.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio_wiring.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio_bcm2835.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_spi.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_class.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_i2cdev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/up.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/command_line_utils_pud.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_utils.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/image
HiPi-0.33/mylib/auto/share/dist/HiPi/image/w1.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi24.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/spidev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi48.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi64.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/gpio1.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi16.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi256.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/mc32.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi128.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/mc16.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi32.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/i2cdev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/gpiodev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/rasp16.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/gpio5.png
HiPi-0.33/lib
HiPi-0.33/lib/HiPi.pm
HiPi-0.33/lib/HiPi
HiPi-0.33/lib/HiPi/Utils.pm
HiPi-0.33/lib/HiPi/Pin.pm
HiPi-0.33/lib/HiPi/Device.pm
HiPi-0.33/lib/HiPi/Interrupt.pm
HiPi-0.33/lib/HiPi/Interface.pm
HiPi-0.33/lib/HiPi/Wiring.pm
HiPi-0.33/lib/HiPi/Constant.pm
HiPi-0.33/lib/HiPi/Class.pm
HiPi-0.33/lib/HiPi/Language.pm
HiPi-0.33/lib/HiPi/RaspberryPi.pm
HiPi-0.33/lib/HiPi/BCM2835.pm
HiPi-0.33/lib/HiPi/Wx
HiPi-0.33/lib/HiPi/Wx/ValidatedText.pm
HiPi-0.33/lib/HiPi/Wx/Menu.pm
HiPi-0.33/lib/HiPi/Wx/Validator.pm
HiPi-0.33/lib/HiPi/Wx/Panel.pm
HiPi-0.33/lib/HiPi/Wx/LogGui.pm
HiPi-0.33/lib/HiPi/Wx/TopLevelWindow.pm
HiPi-0.33/lib/HiPi/Wx/Dialog.pm
HiPi-0.33/lib/HiPi/Wx/Common.pm
HiPi-0.33/lib/HiPi/Wx/ValidatedCheckBox.pm
HiPi-0.33/lib/HiPi/Wx/Frame.pm
HiPi-0.33/lib/HiPi/Wx/App.pm
HiPi-0.33/lib/HiPi/Wx/Validator
HiPi-0.33/lib/HiPi/Wx/Validator/SetValue.pm
HiPi-0.33/lib/HiPi/Wx/Validator/Data.pm
HiPi-0.33/lib/HiPi/Wx/Validator/PassThrough.pm
HiPi-0.33/lib/HiPi/Wx/Validator/BoolEnable.pm
HiPi-0.33/lib/HiPi/Wx/LogGui
HiPi-0.33/lib/HiPi/Wx/LogGui/LogWindowGrid.pm
HiPi-0.33/lib/HiPi/Wx/LogGui/LogWindowListCtrl.pm
HiPi-0.33/lib/HiPi/BCM2835
HiPi-0.33/lib/HiPi/BCM2835/Pin.pm
HiPi-0.33/lib/HiPi/BCM2835/I2C.pm
HiPi-0.33/lib/HiPi/Apps
HiPi-0.33/lib/HiPi/Apps/Control.pm
HiPi-0.33/lib/HiPi/Apps/Control
HiPi-0.33/lib/HiPi/Apps/Control/SelectPanel.pm
HiPi-0.33/lib/HiPi/Apps/Control/GroupDialog.pm
HiPi-0.33/lib/HiPi/Apps/Control/MainWindow.pm
HiPi-0.33/lib/HiPi/Apps/Control/MainPanel.pm
HiPi-0.33/lib/HiPi/Apps/Control/Constant.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel
HiPi-0.33/lib/HiPi/Apps/Control/Panel/Base.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/GPIO1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/SPI.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/Device.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/I2C.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/GPIODEV.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/Pad.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/RInfo.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/GPIO5.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/W1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Command
HiPi-0.33/lib/HiPi/Apps/Control/Command/GPIO.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data
HiPi-0.33/lib/HiPi/Apps/Control/Data/GPIOPAD1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceSPI.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/GPIOPAD5.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceW1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/Utils.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceGPIO.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/Pad.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/RInfo.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceI2C.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/PadPin.pm
HiPi-0.33/lib/HiPi/Apps/Control/Menu
HiPi-0.33/lib/HiPi/Apps/Control/Menu/File.pm
HiPi-0.33/lib/HiPi/Apps/Control/Menu/Help.pm
HiPi-0.33/lib/HiPi/Device
HiPi-0.33/lib/HiPi/Device/SPI.pm
HiPi-0.33/lib/HiPi/Device/I2C.pm
HiPi-0.33/lib/HiPi/Device/GPIO.pm
HiPi-0.33/lib/HiPi/Device/OneWire.pm
HiPi-0.33/lib/HiPi/Device/SerialPort.pm
HiPi-0.33/lib/HiPi/Device/GPIO
HiPi-0.33/lib/HiPi/Device/GPIO/Pin.pm
HiPi-0.33/lib/HiPi/Utils
HiPi-0.33/lib/HiPi/Utils/Exec.pm
HiPi-0.33/lib/HiPi/Interrupt
HiPi-0.33/lib/HiPi/Interrupt/Handler.pm
HiPi-0.33/lib/HiPi/Interrupt/Base.pm
HiPi-0.33/lib/HiPi/Interrupt/Message.pm
HiPi-0.33/lib/HiPi/Interrupt/GPIO.pm
HiPi-0.33/lib/HiPi/Interrupt/Wiring.pm
HiPi-0.33/lib/HiPi/Interrupt/BCM2835.pm
HiPi-0.33/lib/HiPi/Interface
HiPi-0.33/lib/HiPi/Interface/SerLCD.pm
HiPi-0.33/lib/HiPi/Interface/HTBackpackV2.pm
HiPi-0.33/lib/HiPi/Interface/MCP3008.pm
HiPi-0.33/lib/HiPi/Interface/HD44780.pm
HiPi-0.33/lib/HiPi/Interface/MCP49XX.pm
HiPi-0.33/lib/HiPi/Interface/DS18X20.pm
HiPi-0.33/lib/HiPi/Interface/MCP23017.pm
HiPi-0.33/lib/HiPi/Interface/MCP3004.pm
HiPi-0.33/lib/HiPi/Interface/MPL3115A2.pm
HiPi-0.33/lib/HiPi/Interface/HTADCI2C.pm
HiPi-0.33/lib/HiPi/Interface/GPS
HiPi-0.33/lib/HiPi/Interface/GPS/SRF.pm
HiPi-0.33/lib/HiPi/Interface/GPS/NMEA.pm
HiPi-0.33/lib/HiPi/Dummy
HiPi-0.33/lib/HiPi/Dummy/BCM2835.pm
HiPi-0.33/lib/HiPi/Wiring
HiPi-0.33/lib/HiPi/Wiring/Pin.pm
HiPi-0.33/lib/HiPi/Constant
HiPi-0.33/lib/HiPi/Constant/BoardRev1.pm
HiPi-0.33/lib/HiPi/Constant/BoardRev2.pm
HiPi-0.33/BCM2835
HiPi-0.33/BCM2835/src
HiPi-0.33/BCM2835/src/config.guess
HiPi-0.33/BCM2835/src/NEWS
HiPi-0.33/BCM2835/src/README
HiPi-0.33/BCM2835/src/configure
HiPi-0.33/BCM2835/src/missing
HiPi-0.33/BCM2835/src/Makefile.am
HiPi-0.33/BCM2835/src/COPYING
HiPi-0.33/BCM2835/src/config.h.in
HiPi-0.33/BCM2835/src/ltmain.sh
HiPi-0.33/BCM2835/src/INSTALL
HiPi-0.33/BCM2835/src/Makefile.in
HiPi-0.33/BCM2835/src/AUTHORS
HiPi-0.33/BCM2835/src/configure.in
HiPi-0.33/BCM2835/src/config.sub
HiPi-0.33/BCM2835/src/depcomp
HiPi-0.33/BCM2835/src/install-sh
HiPi-0.33/BCM2835/src/aclocal.m4
HiPi-0.33/BCM2835/src/ChangeLog
HiPi-0.33/BCM2835/src/doc
HiPi-0.33/BCM2835/src/doc/Makefile.am
HiPi-0.33/BCM2835/src/doc/Doxyfile.in
HiPi-0.33/BCM2835/src/doc/Makefile.in
HiPi-0.33/BCM2835/src/examples
HiPi-0.33/BCM2835/src/examples/spi
HiPi-0.33/BCM2835/src/examples/spi/spi.c
HiPi-0.33/BCM2835/src/examples/input
HiPi-0.33/BCM2835/src/examples/input/input.c
HiPi-0.33/BCM2835/src/examples/event
HiPi-0.33/BCM2835/src/examples/event/event.c
HiPi-0.33/BCM2835/src/examples/blink
HiPi-0.33/BCM2835/src/examples/blink/blink.c
HiPi-0.33/BCM2835/src/examples/spin
HiPi-0.33/BCM2835/src/examples/spin/spin.c
HiPi-0.33/BCM2835/src/src
HiPi-0.33/BCM2835/src/src/Makefile.am
HiPi-0.33/BCM2835/src/src/bcm2835.c
HiPi-0.33/BCM2835/src/src/Makefile.in
HiPi-0.33/BCM2835/src/src/test.c
HiPi-0.33/BCM2835/src/src/bcm2835.h
HiPi-0.33/userbin
HiPi-0.33/userbin/hipi-gpio
HiPi-0.33/userbin/hipi-expin
HiPi-0.33/userbin/hipi-install
HiPi-0.33/userbin/hipi-upgrade
HiPi-0.33/userbin/hipi-control-gui
HiPi-0.33/t
HiPi-0.33/t/015-device.t
HiPi-0.33/t/045-dev_gpio.t
HiPi-0.33/t/030-dev1wire.t
HiPi-0.33/t/045-devgpio.t
HiPi-0.33/t/060-i2c-all.t
HiPi-0.33/t/005-basic.t
HiPi-0.33/t/000-load.t
HiPi-0.33/t/061-mpl3115a2.t
HiPi-0.33/t/040-devi2c.t
HiPi-0.33/t/010-perms.t
HiPi-0.33/t/055-bcm2835.t
HiPi-0.33/t/035-devspi.t
HiPi-0.33/t/020-devmem.t
HiPi-0.33/t/050-wiring.t
HiPi-0.33/t/025-devserial.t
HiPi-0.33/Wiring
HiPi-0.33/Wiring/wiring.patch
HiPi-0.33/Wiring/src
HiPi-0.33/Wiring/src/wiringPi
HiPi-0.33/Wiring/src/wiringPi/piHiPri.c
HiPi-0.33/Wiring/src/wiringPi/piNes.h
HiPi-0.33/Wiring/src/wiringPi/wiringPi.h
HiPi-0.33/Wiring/src/wiringPi/wiringSerial.c
HiPi-0.33/Wiring/src/wiringPi/README
HiPi-0.33/Wiring/src/wiringPi/softServo.c
HiPi-0.33/Wiring/src/wiringPi/softServo.h
HiPi-0.33/Wiring/src/wiringPi/Makefile
HiPi-0.33/Wiring/src/wiringPi/wiringPiSPI.h
HiPi-0.33/Wiring/src/wiringPi/softTone.c
HiPi-0.33/Wiring/src/wiringPi/gertboard.c
HiPi-0.33/Wiring/src/wiringPi/softTone.h
HiPi-0.33/Wiring/src/wiringPi/lcd.h
HiPi-0.33/Wiring/src/wiringPi/wiringPiI2C.c
HiPi-0.33/Wiring/src/wiringPi/wiringSerial.h
HiPi-0.33/Wiring/src/wiringPi/wiringShift.c
HiPi-0.33/Wiring/src/wiringPi/wiringPiSPI.c
HiPi-0.33/Wiring/src/wiringPi/lcd.c
HiPi-0.33/Wiring/src/wiringPi/piNes.c
HiPi-0.33/Wiring/src/wiringPi/wiringPiFace.c
HiPi-0.33/Wiring/src/wiringPi/wiringShift.h
HiPi-0.33/Wiring/src/wiringPi/softPwm.c
HiPi-0.33/Wiring/src/wiringPi/piThread.c
HiPi-0.33/Wiring/src/wiringPi/COPYING.LESSER
HiPi-0.33/Wiring/src/wiringPi/wiringPiI2C.h
HiPi-0.33/Wiring/src/wiringPi/softPwm.h
HiPi-0.33/Wiring/src/wiringPi/wiringPi.c
HiPi-0.33/Wiring/src/wiringPi/gertboard.h
HiPi-0.33/suidbin
HiPi-0.33/suidbin/hipi-i2c.pl
HiPi-0.33/suidbin/hipi-pud.pl
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building M/MD/MDOOTSON/HiPi-0.33.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Build.PL
Checking prerequisites...
requires:
! Device::SerialPort is not installed
! IO::Epoll is not installed
! IO::Multiplex is not installed
! OpenGL is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'HiPi' version '0.33'
---- Unsatisfied dependencies detected during ----
---- MDOOTSON/HiPi-0.33.tar.gz ----
Device::SerialPort [requires]
IO::Epoll [requires]
OpenGL [requires]
IO::Multiplex [requires]
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running Build test
Delayed until after prerequisites
Running test for module 'Device::SerialPort'
Running make for C/CO/COOK/Device-SerialPort-1.04.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\C\CO\COOK\Device-SerialPort-1.04.tar.gz ok
Device-SerialPort-1.04/
Device-SerialPort-1.04/modemtest
Device-SerialPort-1.04/t/
Device-SerialPort-1.04/t/10basic.t
Device-SerialPort-1.04/t/AltPort.pm
Device-SerialPort-1.04/t/21inherited-state.t
Device-SerialPort-1.04/t/01timing.t
Device-SerialPort-1.04/t/11saved-state.t
Device-SerialPort-1.04/t/20inherited.t
Device-SerialPort-1.04/Device-SerialPort.spec
Device-SerialPort-1.04/MANIFEST
Device-SerialPort-1.04/configure.ac
Device-SerialPort-1.04/Makefile.PL
Device-SerialPort-1.04/eg/
Device-SerialPort-1.04/eg/demo3.plx
Device-SerialPort-1.04/eg/example1.txt
Device-SerialPort-1.04/eg/demo4.plx
Device-SerialPort-1.04/eg/demo8.plx
Device-SerialPort-1.04/eg/any_os.plx
Device-SerialPort-1.04/eg/example2.txt
Device-SerialPort-1.04/eg/demo5.plx
Device-SerialPort-1.04/eg/demo1.plx
Device-SerialPort-1.04/eg/demo2.plx
Device-SerialPort-1.04/eg/demo6.plx
Device-SerialPort-1.04/eg/example6.txt
Device-SerialPort-1.04/eg/example7.txt
Device-SerialPort-1.04/eg/example5.txt
Device-SerialPort-1.04/eg/example4.txt
Device-SerialPort-1.04/eg/options.plx
Device-SerialPort-1.04/eg/demo7.plx
Device-SerialPort-1.04/eg/example8.txt
Device-SerialPort-1.04/eg/example3.txt
Device-SerialPort-1.04/README
Device-SerialPort-1.04/config.h.in
Device-SerialPort-1.04/SerialPort.pm
Device-SerialPort-1.04/Changes
Device-SerialPort-1.04/SerialPort.xs
Device-SerialPort-1.04/TODO
Device-SerialPort-1.04/configure
Device-SerialPort-1.04/show-tiocm.c.test
Device-SerialPort-1.04/META.yml
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building C/CO/COOK/Device-SerialPort-1.04.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
To enable serial port tests, use:
perl Makefile.PL TESTPORT=
where is a specific port or 'auto' to autodetect.
Running ./configure ...
'.' is not recognized as an internal or external command,
operable program or batch file.
The 'configure' script didn't like something. It should have told you
what went wrong, but you can check 'config.log' for more details.
Warning: No success on command[C:\Perl64-5.18\bin\perl.exe Makefile.PL]
COOK/Device-SerialPort-1.04.tar.gz
C:\Perl64-5.18\bin\perl.exe Makefile.PL -- NOT OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running make test
Make had some problems, won't test
Running test for module 'IO::Epoll'
Running make for B/BR/BRUCEK/IO-Epoll-0.03.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\B\BR\BRUCEK\IO-Epoll-0.03.tar.gz ok
IO-Epoll-0.03/
IO-Epoll-0.03/ppport.h
IO-Epoll-0.03/Changes
IO-Epoll-0.03/lib/
IO-Epoll-0.03/lib/IO/
IO-Epoll-0.03/lib/IO/Epoll.pm
IO-Epoll-0.03/t/
IO-Epoll-0.03/t/IO-Ppoll-compat.t
IO-Epoll-0.03/t/IO-Poll-compat.t
IO-Epoll-0.03/t/IO-Epoll.t
IO-Epoll-0.03/README
IO-Epoll-0.03/Makefile.PL
IO-Epoll-0.03/MANIFEST
IO-Epoll-0.03/META.yml
IO-Epoll-0.03/fallback/
IO-Epoll-0.03/fallback/const-c.inc
IO-Epoll-0.03/fallback/const-xs.inc
IO-Epoll-0.03/Epoll.xs
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building B/BR/BRUCEK/IO-Epoll-0.03.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Generating a dmake-style Makefile
Writing Makefile for IO::Epoll
Writing MYMETA.yml and MYMETA.json
>>> dmake
cp lib/IO/Epoll.pm blib\lib\IO\Epoll.pm
AutoSplitting blib\lib\IO\Epoll.pm (blib\lib\auto\IO\Epoll)
Running Mkbootstrap for IO::Epoll ()
"C:\Perl64-5.18\bin\perl.exe" -MExtUtils::Command -e chmod -- 644 "Epoll.bs"
"C:\Perl64-5.18\bin\perl.exe" "C:\cpanfly-5.18\var\megalib\ExtUtils\xsubpp" -typemap "C:\Perl64-5.18\lib\ExtUtils\typemap" Epoll.xs > Epoll.xsc && "C:\Perl64-5.18\bin\perl.exe" -MExtUtils::Command -e mv -- Epoll.xsc Epoll.c
Please specify prototyping behavior for Epoll.xs (see perlxs manual)
gcc -c -I. -s -O2 -DWIN32 -DWIN64 -DCONSERVATIVE -DPERL_TEXTMODE_SCRIPTS -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -fno-strict-aliasing -mms-bitfields -s -O2 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" "-IC:\Perl64-5.18\lib\CORE" Epoll.c
Epoll.xs:7:23: fatal error: sys/epoll.h: No such file or directory
compilation terminated.
dmake: Error code 129, while making 'Epoll.o'
BRUCEK/IO-Epoll-0.03.tar.gz
dmake -- NOT OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running make test
Can't test without successful make
Running test for module 'OpenGL'
Running make for C/CH/CHM/OpenGL-0.6704.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\C\CH\CHM\OpenGL-0.6704.tar.gz ok
OpenGL-0.6704/
OpenGL-0.6704/Array.pod
OpenGL-0.6704/CHANGES
OpenGL-0.6704/COPYRIGHT
OpenGL-0.6704/examples/
OpenGL-0.6704/examples/clip.pl
OpenGL-0.6704/examples/cube.pl
OpenGL-0.6704/examples/depth.pl
OpenGL-0.6704/examples/double.pl
OpenGL-0.6704/examples/fun.pl
OpenGL-0.6704/examples/glu_test.pl
OpenGL-0.6704/examples/glxgears.pl
OpenGL-0.6704/examples/light.pl
OpenGL-0.6704/examples/plane.pl
OpenGL-0.6704/examples/planets.pl
OpenGL-0.6704/examples/quest.pl
OpenGL-0.6704/examples/README
OpenGL-0.6704/examples/simple.pl
OpenGL-0.6704/examples/smooth.pl
OpenGL-0.6704/examples/spaceship.nff
OpenGL-0.6704/examples/stan.ppm
OpenGL-0.6704/examples/tessellation.pl
OpenGL-0.6704/examples/texhack.pl
OpenGL-0.6704/examples/texture.pl
OpenGL-0.6704/examples/tk_demo.pl
OpenGL-0.6704/examples/tk_steal.pl
OpenGL-0.6704/examples/try.pl
OpenGL-0.6704/examples/with-glut.txt
OpenGL-0.6704/examples/with-glx.txt
OpenGL-0.6704/examples/wolf.bin
OpenGL-0.6704/fragment.arb
OpenGL-0.6704/fragment.cg
OpenGL-0.6704/fragment.glsl
OpenGL-0.6704/FreeGLUT/
OpenGL-0.6704/FreeGLUT/freeglut.dll
OpenGL-0.6704/FreeGLUT/freeglut.lib
OpenGL-0.6704/FreeGLUT/README.txt
OpenGL-0.6704/genvars.pl
OpenGL-0.6704/glext_procs.h
OpenGL-0.6704/glut_const.h
OpenGL-0.6704/glut_util.h
OpenGL-0.6704/glu_const.h
OpenGL-0.6704/glu_util.h
OpenGL-0.6704/glx_const.h
OpenGL-0.6704/glx_util.h
OpenGL-0.6704/gl_const.h
OpenGL-0.6704/gl_util.c
OpenGL-0.6704/gl_util.h
OpenGL-0.6704/include/
OpenGL-0.6704/include/GL/
OpenGL-0.6704/include/GL/freeglut.h
OpenGL-0.6704/include/GL/freeglut_ext.h
OpenGL-0.6704/include/GL/freeglut_std.h
OpenGL-0.6704/include/GL/gl.h
OpenGL-0.6704/include/GL/glext.h
OpenGL-0.6704/include/GL/glprocs.h
OpenGL-0.6704/include/GL/glu.h
OpenGL-0.6704/include/GL/glut.h
OpenGL-0.6704/include/GL/glxext.h
OpenGL-0.6704/include/GL/SGIFreeSWLicB.1.1.pdf
OpenGL-0.6704/include/GL/wglext.h
OpenGL-0.6704/INSTALL
OpenGL-0.6704/isosurf.bin
OpenGL-0.6704/isosurf.pl
OpenGL-0.6704/KNOWN_PROBLEMS
OpenGL-0.6704/Makefile.PL
OpenGL-0.6704/MANIFEST
OpenGL-0.6704/MANIFEST.SKIP
OpenGL-0.6704/menutest.pl
OpenGL-0.6704/META.json
OpenGL-0.6704/META.yml
OpenGL-0.6704/oga.pl
OpenGL-0.6704/OpenGL.pm
OpenGL-0.6704/OpenGL.pod
OpenGL-0.6704/OpenGL.xs
OpenGL-0.6704/os2pm_X.h
OpenGL-0.6704/pgopogl.h
OpenGL-0.6704/pgopogl.xs
OpenGL-0.6704/pogl_const.xs
OpenGL-0.6704/pogl_glu.xs
OpenGL-0.6704/pogl_glut.xs
OpenGL-0.6704/pogl_gl_Accu_GetM.xs
OpenGL-0.6704/pogl_gl_GetP_Pass.xs
OpenGL-0.6704/pogl_gl_Mult_Prog.xs
OpenGL-0.6704/pogl_gl_Pixe_Ver2.xs
OpenGL-0.6704/pogl_gl_Prog_Clam.xs
OpenGL-0.6704/pogl_gl_Tex2_Draw.xs
OpenGL-0.6704/pogl_gl_top.xs
OpenGL-0.6704/pogl_gl_Ver3_Tex1.xs
OpenGL-0.6704/pogl_gl_Vert_Multi.xs
OpenGL-0.6704/pogl_rpn.xs
OpenGL-0.6704/ppport.h
OpenGL-0.6704/README
OpenGL-0.6704/Release_Notes
OpenGL-0.6704/SUPPORTS
OpenGL-0.6704/t/
OpenGL-0.6704/t/00_require.t
OpenGL-0.6704/t/01_use.t
OpenGL-0.6704/t/10_opengl_array.t
OpenGL-0.6704/Tessellation.pod
OpenGL-0.6704/test.jpg
OpenGL-0.6704/test.pl
OpenGL-0.6704/test.tga
OpenGL-0.6704/TODO
OpenGL-0.6704/typemap
OpenGL-0.6704/utils/
OpenGL-0.6704/utils/cleanup.pl
OpenGL-0.6704/utils/const.pl
OpenGL-0.6704/utils/exports.pl
OpenGL-0.6704/utils/exports.txt
OpenGL-0.6704/utils/glext_procs.pl
OpenGL-0.6704/utils/glversion.c
OpenGL-0.6704/utils/hdr_diff.pl
OpenGL-0.6704/utils/Makefile
OpenGL-0.6704/utils/Makefile.cygwin
OpenGL-0.6704/utils/Makefile.macosx
OpenGL-0.6704/utils/makefile.mak
OpenGL-0.6704/utils/makefile.mingw
OpenGL-0.6704/utils/mingw.bat
OpenGL-0.6704/utils/opengl32.txt
OpenGL-0.6704/utils/strawberry.bat
OpenGL-0.6704/utils/wgl_ext.txt
OpenGL-0.6704/vertex.arb
OpenGL-0.6704/vertex.cg
OpenGL-0.6704/vertex.glsl
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building C/CH/CHM/OpenGL-0.6704.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
c:/mingw/bin/../lib/gcc/x86_64-w64-mingw32/4.6.3/../../../../x86_64-w64-mingw32/bin/ld.exe: skipping incompatible ../FreeGLUT/freeglut.lib when searching for -lfreeglut
c:/mingw/bin/../lib/gcc/x86_64-w64-mingw32/4.6.3/../../../../x86_64-w64-mingw32/bin/ld.exe: skipping incompatible ../FreeGLUT/freeglut.dll when searching for -lfreeglut
c:/mingw/bin/../lib/gcc/x86_64-w64-mingw32/4.6.3/../../../../x86_64-w64-mingw32/bin/ld.exe: skipping incompatible ../FreeGLUT/freeglut.lib when searching for -lfreeglut
c:/mingw/bin/../lib/gcc/x86_64-w64-mingw32/4.6.3/../../../../x86_64-w64-mingw32/bin/ld.exe: skipping incompatible ../FreeGLUT/freeglut.dll when searching for -lfreeglut
c:/mingw/bin/../lib/gcc/x86_64-w64-mingw32/4.6.3/../../../../x86_64-w64-mingw32/bin/ld.exe: skipping incompatible ../FreeGLUT\freeglut.lib when searching for -lfreeglut
c:/mingw/bin/../lib/gcc/x86_64-w64-mingw32/4.6.3/../../../../x86_64-w64-mingw32/bin/ld.exe: cannot find -lfreeglut
collect2: ld returned 1 exit status
No 'Makefile' created CHM/OpenGL-0.6704.tar.gz
C:\Perl64-5.18\bin\perl.exe Makefile.PL -- NOT OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running make test
Make had some problems, won't test
Running test for module 'IO::Multiplex'
Running make for M/MA/MARKOV/IO-Multiplex-1.13.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\M\MA\MARKOV\IO-Multiplex-1.13.tar.gz ok
IO-Multiplex-1.13/
IO-Multiplex-1.13/lib/
IO-Multiplex-1.13/lib/IO/
IO-Multiplex-1.13/lib/IO/Multiplex.pm
IO-Multiplex-1.13/Makefile.PL
IO-Multiplex-1.13/TODO
IO-Multiplex-1.13/META.yml
IO-Multiplex-1.13/t/
IO-Multiplex-1.13/t/100_load.t
IO-Multiplex-1.13/t/200_udp.t
IO-Multiplex-1.13/t/110_ntest.t
IO-Multiplex-1.13/t/110_test.t
IO-Multiplex-1.13/Changes
IO-Multiplex-1.13/MANIFEST
IO-Multiplex-1.13/README
IO-Multiplex-1.13/contrib/
IO-Multiplex-1.13/contrib/portfw
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building M/MA/MARKOV/IO-Multiplex-1.13.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Generating a dmake-style Makefile
Writing Makefile for IO::Multiplex
Writing MYMETA.yml and MYMETA.json
>>> dmake
cp lib/IO/Multiplex.pm blib\lib\IO\Multiplex.pm
MARKOV/IO-Multiplex-1.13.tar.gz
dmake -- OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl64-5.18\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/100_load.t ...
1..1
ok 1
ok
Modification of a read-only value attempted at C:\cpanfly-5.18\var\cpan\build\IO-Multiplex-1.13-3JOqtq\blib\lib/IO/Multiplex.pm line 948.
t/110_ntest.t ..
1..13
ok 1
ok 2
ok 3
Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 10/13 subtests
Modification of a read-only value attempted at C:\cpanfly-5.18\var\cpan\build\IO-Multiplex-1.13-3JOqtq\blib\lib/IO/Multiplex.pm line 948.
t/110_test.t ...
1..8
ok 1
ok 2
ok 3
Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 5/8 subtests
Modification of a read-only value attempted at C:\cpanfly-5.18\var\cpan\build\IO-Multiplex-1.13-3JOqtq\blib\lib/IO/Multiplex.pm line 948.
Modification of a read-only value attempted at C:\cpanfly-5.18\var\cpan\build\IO-Multiplex-1.13-3JOqtq\blib\lib/IO/Multiplex.pm line 948.
t/200_udp.t ....
1..15
# Running under perl version 5.018001 for MSWin32
# Win32::BuildNumber 1800
# Current time local: Thu Jan 15 04:58:31 2015
# Current time GMT: Thu Jan 15 12:58:31 2015
# Using Test.pm version 1.26
ok 1
ok 2
ok 3
Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 12/15 subtests
Test Summary Report
-------------------
t/110_ntest.t (Wstat: 6400 Tests: 3 Failed: 0)
Non-zero exit status: 25
Parse errors: Bad plan. You planned 13 tests but ran 3.
t/110_test.t (Wstat: 6400 Tests: 3 Failed: 0)
Non-zero exit status: 25
Parse errors: Bad plan. You planned 8 tests but ran 3.
t/200_udp.t (Wstat: 6400 Tests: 3 Failed: 0)
Non-zero exit status: 25
Parse errors: Bad plan. You planned 15 tests but ran 3.
Files=4, Tests=10, 1 wallclock secs ( 0.03 usr + 0.03 sys = 0.06 CPU)
Result: FAIL
Failed 3/4 test programs. 0/10 subtests failed.
dmake: Error code 153, while making 'test_dynamic'
MARKOV/IO-Multiplex-1.13.tar.gz
dmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports MARKOV/IO-Multiplex-1.13.tar.gz
Running Build for M/MD/MDOOTSON/HiPi-0.33.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory C:\cpanfly-5.18\var\cpan\build\HiPi-0.33-OkWREl
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building M/MD/MDOOTSON/HiPi-0.33.tar.gz
Warning: Prerequisite 'OpenGL => 0' for 'MDOOTSON/HiPi-0.33.tar.gz' failed when processing 'CHM/OpenGL-0.6704.tar.gz' with 'writemakefile => NO -- No 'Makefile' created
'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'IO::Multiplex => 0' for 'MDOOTSON/HiPi-0.33.tar.gz' failed when processing 'MARKOV/IO-Multiplex-1.13.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'IO::Epoll => 0' for 'MDOOTSON/HiPi-0.33.tar.gz' failed when processing 'BRUCEK/IO-Epoll-0.03.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'Device::SerialPort => 0' for 'MDOOTSON/HiPi-0.33.tar.gz' failed when processing 'COOK/Device-SerialPort-1.04.tar.gz' with 'writemakefile => NO 'C:\Perl64-5.18\bin\perl.exe Makefile.PL' returned status 512'. Continuing, but chances to succeed are limited.
>>> C:\Perl64-5.18\bin\perl.exe ./Build
Building HiPi
Building wiringPi library
SH make
'make' is not recognized as an internal or external command,
operable program or batch file.
Failed with exit code 256
make static CC=gcc CXX=g++ LD=g++
MDOOTSON/HiPi-0.33.tar.gz
C:\Perl64-5.18\bin\perl.exe ./Build -- NOT OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running Build test
Can't test without successful make
Running test for module 'GStreamer1'
Running make for T/TM/TMURRAY/GStreamer1-0.003.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\T\TM\TMURRAY\GStreamer1-0.003.tar.gz ok
GStreamer1-0.003/
GStreamer1-0.003/MANIFEST
GStreamer1-0.003/lib/
GStreamer1-0.003/lib/GStreamer1.pm
GStreamer1-0.003/lib/GStreamer1/
GStreamer1-0.003/lib/GStreamer1/Caps/
GStreamer1-0.003/lib/GStreamer1/Caps/Simple.pm
GStreamer1-0.003/examples/
GStreamer1-0.003/examples/rpi_pic.pl
GStreamer1-0.003/examples/hello.pl
GStreamer1-0.003/examples/symdump.pl
GStreamer1-0.003/META.json
GStreamer1-0.003/CHANGELOG
GStreamer1-0.003/Makefile.PL
GStreamer1-0.003/dist.ini
GStreamer1-0.003/t/
GStreamer1-0.003/t/010_caps_simple.t
GStreamer1-0.003/t/001_load.t
GStreamer1-0.003/t/002_pod.t
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building T/TM/TMURRAY/GStreamer1-0.003.tar.gz
>>> C:\Perl64-5.18\bin\perl.exe Makefile.PL
Can't link/include C library 'gstreamer-1.0', aborting.
No 'Makefile' created TMURRAY/GStreamer1-0.003.tar.gz
C:\Perl64-5.18\bin\perl.exe Makefile.PL -- NOT OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running make test
Make had some problems, won't test
Running make for T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory C:\cpanfly-5.18\var\cpan\build\Device-WebIO-RaspberryPi-0.008-3lqdUh
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
Warning: Prerequisite 'HiPi => 0' for 'TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz' failed when processing 'MDOOTSON/HiPi-0.33.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'GStreamer1 => 0.002' for 'TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz' failed when processing 'TMURRAY/GStreamer1-0.003.tar.gz' with 'writemakefile => NO -- No 'Makefile' created
'. Continuing, but chances to succeed are limited.
>>> dmake
cp lib/Device/WebIO/RaspberryPi.pm blib\lib\Device\WebIO\RaspberryPi.pm
TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
dmake -- OK
Prepending C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib to PERL5LIB for 'test'
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl64-5.18\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
# Failed test 'use Device::WebIO::RaspberryPi;'
# at t/001_load.t line 27.
# Tried to use 'Device::WebIO::RaspberryPi'.
# Error: Can't locate HiPi/Wiring.pm in @INC (you may need to install the HiPi::Wiring module) (@INC contains: C:\cpanfly-5.18\var\cpan\build\Device-WebIO-RaspberryPi-0.008-3lqdUh\blib\lib C:\cpanfly-5.18\var\cpan\build\Device-WebIO-RaspberryPi-0.008-3lqdUh\blib\arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib C:/cpanfly-5.18/var/megalib C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/arch C:\cpanfly-5.18\var\cpan\build\Device-WebIO-0.009-pSQWrX/blib/lib C:/cpanfly-5.18/var/megalib C:/Perl64-5.18/site/lib C:/Perl64-5.18/lib .) at C:\cpanfly-5.18\var\cpan\build\Device-WebIO-RaspberryPi-0.008-3lqdUh\blib\lib/Device/WebIO/RaspberryPi.pm line 30.
# BEGIN failed--compilation aborted at C:\cpanfly-5.18\var\cpan\build\Device-WebIO-RaspberryPi-0.008-3lqdUh\blib\lib/Device/WebIO/RaspberryPi.pm line 30.
# Compilation failed in require at t/001_load.t line 27.
# BEGIN failed--compilation aborted at t/001_load.t line 27.
# Looks like you failed 1 test of 1.
t/001_load.t ..
1..1
not ok 1 - use Device::WebIO::RaspberryPi;
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/002_pod.t ...
1..1
ok 1 - POD test for lib/Device/WebIO/RaspberryPi.pm
ok
Test Summary Report
-------------------
t/001_load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=2, Tests=2, 1 wallclock secs ( 0.06 usr + 0.02 sys = 0.08 CPU)
Result: FAIL
Failed 1/2 test programs. 1/2 subtests failed.
dmake: Error code 255, while making 'test_dynamic'
TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
2 dependencies missing (GStreamer1,HiPi); additionally test harness failed
dmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports TMURRAY/Device-WebIO-RaspberryPi-0.008.tar.gz
Could not read metadata file. Falling back to other methods to determine prerequisites
Finished 2015-01-15T04:58:40