PATH=C:\cpanfly-5.20-64\var\megalib\bin;C:\Perl64-5.20\site\bin;C:\Perl64-5.20\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\instantclient_11_2-64;C:\cpanfly-5.20-64\var\megalib\bin;C:\Perl64-5.20\site\bin;C:\Perl64-5.20\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\instantclient_11_2-64;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Git\cmd;C:\Program Files (x86)\CMake\bin Start 2017-01-16T00:01:30 ActivePerl-2003 CPAN-2.10 PATH=C:/CPANFL~1.20-/var/libs/bin;C:\CPANFL~1.20-\var\megalib\bin;C:\Perl64-5.20\site\bin;C:\Perl64-5.20\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\INSTAN~1;C:\CPANFL~1.20-\var\megalib\bin;C:\Perl64-5.20\site\bin;C:\Perl64-5.20\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\INSTAN~1;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~1\Git\cmd;C:\PROGRA~2\CMake\bin Reading 'C:\cpanfly-5.20-64\var\cpan\Metadata' Database was generated on Sun, 15 Jan 2017 05:17:02 GMT Checksum for C:\cpanfly-5.20-64\var\cpan\sources\authors\id\P\PE\PERLANCAR\Perinci-Sub-Complete-0.91.tar.gz ok Perinci-Sub-Complete-0.91/ Perinci-Sub-Complete-0.91/META.json Perinci-Sub-Complete-0.91/LICENSE Perinci-Sub-Complete-0.91/Changes Perinci-Sub-Complete-0.91/META.yml Perinci-Sub-Complete-0.91/Makefile.PL Perinci-Sub-Complete-0.91/t/ Perinci-Sub-Complete-0.91/t/author-pod-coverage.t Perinci-Sub-Complete-0.91/t/complete_arg_index.t Perinci-Sub-Complete-0.91/t/complete_cli_arg.t Perinci-Sub-Complete-0.91/t/complete_from_schema.t Perinci-Sub-Complete-0.91/t/complete_arg_elem.t Perinci-Sub-Complete-0.91/t/complete_arg_val.t Perinci-Sub-Complete-0.91/t/release-rinci.t Perinci-Sub-Complete-0.91/t/author-pod-syntax.t Perinci-Sub-Complete-0.91/t/00-compile.t Perinci-Sub-Complete-0.91/README Perinci-Sub-Complete-0.91/dist.ini Perinci-Sub-Complete-0.91/lib/ Perinci-Sub-Complete-0.91/lib/Perinci/ Perinci-Sub-Complete-0.91/lib/Perinci/Sub/ Perinci-Sub-Complete-0.91/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.91/MANIFEST Perinci-Sub-Complete-0.91/weaver.ini Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz with Makefile.PL >>> C:\Perl64-5.20\bin\perl.exe Makefile.PL Warning: prerequisite Complete::Getopt::Long 0.43 not found. We have 0.41. Checking if your kit is complete... Looks good Have \cpanfl~1.20-\var\megalib Want \perl64-5.20\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz C:\Perl64-5.20\bin\perl.exe Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz ---- Complete::Getopt::Long [requires] Running test for module 'Complete::Getopt::Long' Checksum for C:\cpanfly-5.20-64\var\cpan\sources\authors\id\P\PE\PERLANCAR\Complete-Getopt-Long-0.46.tar.gz ok Complete-Getopt-Long-0.46/ Complete-Getopt-Long-0.46/README Complete-Getopt-Long-0.46/dist.ini Complete-Getopt-Long-0.46/Makefile.PL Complete-Getopt-Long-0.46/META.yml Complete-Getopt-Long-0.46/t/ Complete-Getopt-Long-0.46/t/author-pod-syntax.t Complete-Getopt-Long-0.46/t/release-rinci.t Complete-Getopt-Long-0.46/t/00-compile.t Complete-Getopt-Long-0.46/t/author-pod-coverage.t Complete-Getopt-Long-0.46/t/complete_cli_arg.t Complete-Getopt-Long-0.46/weaver.ini Complete-Getopt-Long-0.46/META.json Complete-Getopt-Long-0.46/MANIFEST Complete-Getopt-Long-0.46/lib/ Complete-Getopt-Long-0.46/lib/Complete/ Complete-Getopt-Long-0.46/lib/Complete/Getopt/ Complete-Getopt-Long-0.46/lib/Complete/Getopt/Long.pm Complete-Getopt-Long-0.46/LICENSE Complete-Getopt-Long-0.46/Changes Configuring P/PE/PERLANCAR/Complete-Getopt-Long-0.46.tar.gz with Makefile.PL >>> C:\Perl64-5.20\bin\perl.exe Makefile.PL Checking if your kit is complete... Looks good Have \cpanfl~1.20-\var\megalib Want \perl64-5.20\lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [MSWin32-x64-multi-thread] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a dmake-style Makefile Writing Makefile for Complete::Getopt::Long Writing MYMETA.yml and MYMETA.json PERLANCAR/Complete-Getopt-Long-0.46.tar.gz C:\Perl64-5.20\bin\perl.exe Makefile.PL -- OK Running make for P/PE/PERLANCAR/Complete-Getopt-Long-0.46.tar.gz >>> dmake cp lib/Complete/Getopt/Long.pm blib\lib\Complete\Getopt\Long.pm PERLANCAR/Complete-Getopt-Long-0.46.tar.gz dmake -- OK Running make test >>> dmake test TEST_VERBOSE=1 "C:\Perl64-5.20\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t t/00-compile.t ........... 1..1 ok 1 - Complete/Getopt/Long.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author # Child (file fallback completion) exited without calling finalize() # Failed test 'file fallback completion' # at C:/cpanfly-5.20-64/var/megalib/Test/Builder.pm line 279. Can't locate Complete/Setting.pm in @INC (you may need to install the Complete::Setting module) (@INC contains: C:\cpanfly-5.20-64\var\tmp\cpan_build\Complete-Getopt-Long-0.46-tfIvKK\blib\lib C:\cpanfly-5.20-64\var\tmp\cpan_build\Complete-Getopt-Long-0.46-tfIvKK\blib\arch C:/cpanfly-5.20-64/var/megalib C:/cpanfly-5.20-64/var/megalib C:/Perl64-5.20/site/lib C:/Perl64-5.20/lib .) at C:/cpanfly-5.20-64/var/megalib/Complete/Env.pm line 10. BEGIN failed--compilation aborted at C:/cpanfly-5.20-64/var/megalib/Complete/Env.pm line 10. Compilation failed in require at C:\cpanfly-5.20-64\var\tmp\cpan_build\Complete-Getopt-Long-0.46-tfIvKK\blib\lib/Complete/Getopt/Long.pm line 20. # Child (default fallback completion) exited without calling finalize() # Failed test 'default fallback completion' # at C:/cpanfly-5.20-64/var/megalib/Test/Builder.pm line 279. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 2 just after 3. t/complete_cli_arg.t ..... # Subtest: basics # Subtest: option name ok 1 - result 1..1 ok 1 - option name # Subtest: option name (2) ok 1 - result 1..1 ok 2 - option name (2) # Subtest: option name (3) ok 1 - result 1..1 ok 3 - option name (3) # Subtest: option name (single letter n! does not get --nox and --no-x) ok 1 - result 1..1 ok 4 - option name (single letter n! does not get --nox and --no-x) # Subtest: option name (bundling) ok 1 - result 1..1 ok 5 - option name (bundling) # Subtest: option name (bundling 2) ok 1 - result 1..1 ok 6 - option name (bundling 2) # Subtest: option name (bundling 3) ok 1 - result 1..1 ok 7 - option name (bundling 3) # Subtest: option name (bundling 4) ok 1 - result 1..1 ok 8 - option name (bundling 4) # Subtest: option name (bundling), bundling=0 ok 1 - result 1..1 ok 9 - option name (bundling), bundling=0 # Subtest: option name (bundling, stops after value expected) ok 1 - result 1..1 ok 10 - option name (bundling, stops after value expected) # Subtest: option value (bundling) ok 1 - result 1..1 ok 11 - option value (bundling) # Subtest: option name (bundling 1) ok 1 - result 1..1 ok 12 - option name (bundling 1) # Subtest: option name (bundling 1b) ok 1 - result 1..1 ok 13 - option name (bundling 1b) # Subtest: option name (bundling 5) ok 1 - result 1..1 ok 14 - option name (bundling 5) # Subtest: option name with mentioned non-repeatable option (alias) ok 1 - result 1..1 ok 15 - option name with mentioned non-repeatable option (alias) # Subtest: option name with mentioned non-repeatable option (alias 2) ok 1 - result 1..1 ok 16 - option name with mentioned non-repeatable option (alias 2) # Subtest: option name with mentioned non-repeatable option (bundling) ok 1 - result 1..1 ok 17 - option name with mentioned non-repeatable option (bundling) # Subtest: repeatable option name 1 (assigned to arrayref) ok 1 - result 1..1 ok 18 - repeatable option name 1 (assigned to arrayref) # Subtest: repeatable option name 2 (desttype @) ok 1 - result 1..1 ok 19 - repeatable option name 2 (desttype @) # Subtest: repeatable option name 3 (desttype %) ok 1 - result 1..1 ok 20 - repeatable option name 3 (desttype %) # Subtest: repeatable option name 4 (incremental) ok 1 - result 1..1 ok 21 - repeatable option name 4 (incremental) # Subtest: option name + arg completion ok 1 - result 1..1 ok 22 - option name + arg completion # Subtest: option name only (user types -) ok 1 - result 1..1 ok 23 - option name only (user types -) # Subtest: option value without completion routine ok 1 - result 1..1 ok 24 - option value without completion routine # Subtest: option value without completion routine (2) ok 1 - result 1..1 ok 25 - option value without completion routine (2) # Subtest: option value for unknown option ok 1 - result 1..1 ok 26 - option value for unknown option # Subtest: option value for option that does not expect value ok 1 - result 1..1 ok 27 - option value for option that does not expect value # Subtest: option value with completion routine returning array ok 1 - result 1..1 ok 28 - option value with completion routine returning array # Subtest: extras argument ok 1 - result 1..1 ok 29 - extras argument 1..29 ok 1 - basics # Subtest: config bundling=0 # Subtest: basics ok 1 - result 1..1 ok 1 - basics 1..1 ok 2 - config bundling=0 # Subtest: default fallback completion # Subtest: file fallback completion not ok 1 - file fallback completion not ok 3 - default fallback completion Dubious, test returned 2 (wstat 512, 0x200) Failed 1/3 subtests t/release-rinci.t ........ skipped: these tests are for release candidate testing Test Summary Report ------------------- t/complete_cli_arg.t (Wstat: 512 Tests: 3 Failed: 1) Failed test: 3 Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=5, Tests=4, 1 wallclock secs ( 0.11 usr + 0.00 sys = 0.11 CPU) Result: FAIL Failed 1/5 test programs. 1/4 subtests failed. dmake: Error code 255, while making 'test_dynamic' PERLANCAR/Complete-Getopt-Long-0.46.tar.gz dmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Complete-Getopt-Long-0.46.tar.gz PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz Has already been unwrapped into directory C:\cpanfly-5.20-64\var\tmp\cpan_build\Perinci-Sub-Complete-0.91-5LNldl PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz Warning: Prerequisite 'Complete::Getopt::Long => 0.43' for 'PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz' failed when processing 'PERLANCAR/Complete-Getopt-Long-0.46.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> dmake cp lib/Perinci/Sub/Complete.pm blib\lib\Perinci\Sub\Complete.pm PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz dmake -- OK Running make test >>> dmake test TEST_VERBOSE=1 "C:\Perl64-5.20\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/author-pod-coverage.t ... skipped: these tests are for testing by the author t/author-pod-syntax.t ..... skipped: these tests are for testing by the author t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_index.t .... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: C:\cpanfly-5.20-64\var\tmp\cpan_build\Perinci-Sub-Complete-0.91-5LNldl\blib\lib C:\cpanfly-5.20-64\var\tmp\cpan_build\Perinci-Sub-Complete-0.91-5LNldl\blib\arch C:/cpanfly-5.20-64/var/megalib C:/cpanfly-5.20-64/var/megalib C:/Perl64-5.20/site/lib C:/Perl64-5.20/lib .) at C:/cpanfly-5.20-64/var/megalib/Perinci/Sub/Normalize.pm line 144. t/complete_cli_arg.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/complete_from_schema.t .. # Subtest: schema must be normalized ok 1 1..1 ok 1 - schema must be normalized # Subtest: is clause ok 1 ok 2 1..2 ok 2 - is clause # Subtest: in clause ok 1 1..1 ok 3 - in clause # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 4 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 5 - float # Subtest: any ok 1 ok 2 1..2 ok 6 - any # Subtest: schema is based on other schema ok 1 ok 2 ok 3 1..3 ok 7 - schema is based on other schema 1..7 ok t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/complete_cli_arg.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=9, Tests=11, 1 wallclock secs ( 0.09 usr + 0.01 sys = 0.11 CPU) Result: FAIL Failed 1/9 test programs. 0/11 subtests failed. dmake: Error code 255, while making 'test_dynamic' PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz dmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz Finished 2017-01-16T00:01:54