PATH=C:\cpanfly-5.24-64\var\megalib\bin;C:\Perl-5.24-64\site\bin;C:\Perl-5.24-64\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\instantclient_11_2-64;C:\cpanfly-5.24-64\var\megalib\bin;C:\Perl-5.24-64\site\bin;C:\Perl-5.24-64\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\instantclient_11_2-64;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Git\cmd;C:\Program Files (x86)\CMake\bin
Start 2017-12-20T16:19:15
ActivePerl-2400 CPAN-2.10
PATH=C:/CPANFL~1.24-/var/libs/bin;C:\CPANFL~1.24-\var\megalib\bin;C:\PERL-5~1.24-\site\bin;C:\PERL-5~1.24-\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\INSTAN~1;C:\CPANFL~1.24-\var\megalib\bin;C:\PERL-5~1.24-\site\bin;C:\PERL-5~1.24-\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\INSTAN~1;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~1\Git\cmd;C:\PROGRA~2\CMake\bin
Reading 'C:\cpanfly-5.24-64\var\cpan\Metadata'
  Database was generated on Wed, 20 Dec 2017 01:29:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/M/MG/MGV/Slob-0.001.tar.gz
Checksum for C:\cpanfly-5.24-64\var\cpan\sources\authors\id\M\MG\MGV\Slob-0.001.tar.gz ok
Slob-0.001/
Slob-0.001/lib/
Slob-0.001/lib/Slob.pm
Slob-0.001/t/
Slob-0.001/t/freedict-uncompressed.slob
Slob-0.001/t/Slob.t
Slob-0.001/t/freedict-lzma2.slob
Slob-0.001/README
Slob-0.001/MANIFEST
Slob-0.001/Makefile.PL
Slob-0.001/Changes
Slob-0.001/META.yml
Slob-0.001/META.json
Slob-0.001/SIGNATURE
Configuring M/MG/MGV/Slob-0.001.tar.gz with Makefile.PL
>>> C:\Perl-5.24-64\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Have \cpanfl~1.24-\var\megalib
Want \perl-5~1.24-\lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [MSWin32-x64-multi-thread]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a dmake-style Makefile
Writing Makefile for Slob
Writing MYMETA.yml and MYMETA.json
  MGV/Slob-0.001.tar.gz
  C:\Perl-5.24-64\bin\perl.exe Makefile.PL -- OK
Running make for M/MG/MGV/Slob-0.001.tar.gz
>>> dmake
cp lib/Slob.pm blib\lib\Slob.pm
  MGV/Slob-0.001.tar.gz
  dmake -- OK
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl-5.24-64\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
Error decoding LZMA2: Data is corrupt at C:\cpanfly-5.24-64\var\tmp\cpan_build\Slob-0.001-5GLkNe\blib\lib/Slob.pm line 24.
# Looks like your test exited with 255 just after 7.
t/Slob.t .. 
1..13
ok 1 - use Slob;
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/13 subtests 

Test Summary Report
-------------------
t/Slob.t (Wstat: 65280 Tests: 7 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 13 tests but ran 7.
Files=1, Tests=7,  0 wallclock secs ( 0.03 usr +  0.01 sys =  0.05 CPU)
Result: FAIL
Failed 1/1 test programs. 0/7 subtests failed.
dmake:  Error code 255, while making 'test_dynamic'
  MGV/Slob-0.001.tar.gz
  dmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports MGV/Slob-0.001.tar.gz
Finished 2017-12-20T16:19:23