PATH=C:\cpanfly-5.24-64\var\megalib\bin;C:\Perl-5.24-64\site\bin;C:\Perl-5.24-64\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\instantclient_11_2-64;C:\cpanfly-5.24-64\var\megalib\bin;C:\Perl-5.24-64\site\bin;C:\Perl-5.24-64\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\instantclient_11_2-64;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Git\cmd;C:\Program Files (x86)\CMake\bin Start 2016-06-15T13:02:41 ActivePerl-2400 CPAN-2.10 PATH=C:/CPANFL~1.24-/var/libs/bin;C:\CPANFL~1.24-\var\megalib\bin;C:\PERL-5~1.24-\site\bin;C:\PERL-5~1.24-\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\INSTAN~1;C:\CPANFL~1.24-\var\megalib\bin;C:\PERL-5~1.24-\site\bin;C:\PERL-5~1.24-\bin;C:\MinGW-64\bin;C:\cygwin\bin;C:\INSTAN~1;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~1\Git\cmd;C:\PROGRA~2\CMake\bin Reading 'C:\cpanfly-5.24-64\var\cpan\Metadata' Database was generated on Wed, 15 Jun 2016 03:41:02 GMT Checksum for C:\cpanfly-5.24-64\var\cpan\sources\authors\id\P\PL\PLICEASE\FFI-Platypus-Lang-Rust-0.04.tar.gz ok FFI-Platypus-Lang-Rust-0.04 FFI-Platypus-Lang-Rust-0.04/Changes FFI-Platypus-Lang-Rust-0.04/Build.PL FFI-Platypus-Lang-Rust-0.04/LICENSE FFI-Platypus-Lang-Rust-0.04/CONTRIBUTING FFI-Platypus-Lang-Rust-0.04/MANIFEST FFI-Platypus-Lang-Rust-0.04/INSTALL FFI-Platypus-Lang-Rust-0.04/.gitattributes FFI-Platypus-Lang-Rust-0.04/META.yml FFI-Platypus-Lang-Rust-0.04/README FFI-Platypus-Lang-Rust-0.04/META.json FFI-Platypus-Lang-Rust-0.04/SUPPORT FFI-Platypus-Lang-Rust-0.04/.travis.yml FFI-Platypus-Lang-Rust-0.04/libtest FFI-Platypus-Lang-Rust-0.04/libtest/Cargo.toml FFI-Platypus-Lang-Rust-0.04/libtest/src FFI-Platypus-Lang-Rust-0.04/libtest/src/lib.rs FFI-Platypus-Lang-Rust-0.04/examples FFI-Platypus-Lang-Rust-0.04/examples/points.rs FFI-Platypus-Lang-Rust-0.04/examples/string.pl FFI-Platypus-Lang-Rust-0.04/examples/string.rs FFI-Platypus-Lang-Rust-0.04/examples/points.pl FFI-Platypus-Lang-Rust-0.04/lib FFI-Platypus-Lang-Rust-0.04/lib/Module FFI-Platypus-Lang-Rust-0.04/lib/Module/Build FFI-Platypus-Lang-Rust-0.04/lib/Module/Build/FFI FFI-Platypus-Lang-Rust-0.04/lib/Module/Build/FFI/Rust.pm FFI-Platypus-Lang-Rust-0.04/lib/FFI FFI-Platypus-Lang-Rust-0.04/lib/FFI/Platypus FFI-Platypus-Lang-Rust-0.04/lib/FFI/Platypus/Lang FFI-Platypus-Lang-Rust-0.04/lib/FFI/Platypus/Lang/Rust.pm FFI-Platypus-Lang-Rust-0.04/t FFI-Platypus-Lang-Rust-0.04/t/lang.t FFI-Platypus-Lang-Rust-0.04/t/example.t FFI-Platypus-Lang-Rust-0.04/t/ffi_platypus_attach.t FFI-Platypus-Lang-Rust-0.04/t/01_use.t FFI-Platypus-Lang-Rust-0.04/t/00_diag.txt FFI-Platypus-Lang-Rust-0.04/t/00_diag.t FFI-Platypus-Lang-Rust-0.04/t/02_types.t FFI-Platypus-Lang-Rust-0.04/inc FFI-Platypus-Lang-Rust-0.04/inc/run FFI-Platypus-Lang-Rust-0.04/inc/run/readme.pl FFI-Platypus-Lang-Rust-0.04/inc/My FFI-Platypus-Lang-Rust-0.04/inc/My/ModuleBuild.pm Configuring P/PL/PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz with Build.PL >>> C:\Perl-5.24-64\bin\perl.exe Build.PL Unable to find rustc. Please make sure it is in the PATH. You should still be able to use pre-compiled rust dynamic libs. Checking prerequisites... test_requires: ! Test::Script is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'FFI-Platypus-Lang-Rust' version '0.04' PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz C:\Perl-5.24-64\bin\perl.exe Build.PL -- OK Running Build for P/PL/PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz ---- Test::Script [build_requires] Running test for module 'Test::Script' Checksum for C:\cpanfly-5.24-64\var\cpan\sources\authors\id\P\PL\PLICEASE\Test-Script-1.12.tar.gz ok Test-Script-1.12/ Test-Script-1.12/t2/ Test-Script-1.12/t2/test_script__script_compiles.t Test-Script-1.12/t2/test_script__script_runs.t Test-Script-1.12/t2/test_script__exports.t Test-Script-1.12/lib/ Test-Script-1.12/lib/Test/ Test-Script-1.12/lib/Test/Script.pm Test-Script-1.12/xt/ Test-Script-1.12/xt/release/ Test-Script-1.12/xt/release/pod_spelling_system.t Test-Script-1.12/xt/release/pod_spelling_common.t Test-Script-1.12/xt/release/pod_coverage.t Test-Script-1.12/xt/release/release.yml Test-Script-1.12/xt/release/version.t Test-Script-1.12/xt/release/no_tabs.t Test-Script-1.12/xt/release/fixme.t Test-Script-1.12/xt/release/pod.t Test-Script-1.12/xt/release/eol.t Test-Script-1.12/Makefile.PL Test-Script-1.12/t/ Test-Script-1.12/t/08_trap_exit_or_signal.t Test-Script-1.12/t/09_capture_output.t Test-Script-1.12/t/02_compiles_good.t Test-Script-1.12/t/03_compiles_bad.t Test-Script-1.12/t/04_runs_good.t Test-Script-1.12/t/06_exception.t Test-Script-1.12/t/05_runs_bad.t Test-Script-1.12/t/01_compile.t Test-Script-1.12/t/07_signal.t Test-Script-1.12/t/bin/ Test-Script-1.12/t/bin/signal.pl Test-Script-1.12/t/bin/print.pl Test-Script-1.12/t/bin/four.pl Test-Script-1.12/t/bin/good.pl Test-Script-1.12/t/bin/bad.pl Test-Script-1.12/t/00_diag.t Test-Script-1.12/run_test.pl Test-Script-1.12/META.json Test-Script-1.12/cpanfile Test-Script-1.12/MANIFEST Test-Script-1.12/META.yml Test-Script-1.12/dist.ini Test-Script-1.12/INSTALL Test-Script-1.12/LICENSE Test-Script-1.12/Changes Test-Script-1.12/README Configuring P/PL/PLICEASE/Test-Script-1.12.tar.gz with Makefile.PL >>> C:\Perl-5.24-64\bin\perl.exe Makefile.PL Checking if your kit is complete... Looks good Generating a dmake-style Makefile Writing Makefile for Test::Script Writing MYMETA.yml and MYMETA.json PLICEASE/Test-Script-1.12.tar.gz C:\Perl-5.24-64\bin\perl.exe Makefile.PL -- OK Running make for P/PL/PLICEASE/Test-Script-1.12.tar.gz >>> dmake cp lib/Test/Script.pm blib\lib/Test/Script.pm PLICEASE/Test-Script-1.12.tar.gz dmake -- OK Running make test >>> dmake test TEST_VERBOSE=1 "C:\Perl-5.24-64\bin\perl.exe" run_test.pl # # # # ACTIVEPERL_CONFIG_DISABLE=1 # HARNESS_ACTIVE=1 # HARNESS_VERSION=3.36 # PERL5LIB=C:\cpanfly-5.24-64\var\tmp\cpan_build\Test-Script-1.12-EFUqiT\blib\arch;C:\cpanfly-5.24-64\var\tmp\cpan_build\Test-Script-1.12-EFUqiT\blib\lib;C:/cpanfly-5.24-64/var/megalib;C:/cpanfly-5.24-64/var/megalib # PERL5_CPANPLUS_IS_RUNNING=2080 # PERL5_CPAN_IS_RUNNING=2080 # PERL5_CPAN_IS_RUNNING_IN_RECURSION=2392,2080 # PERL_MM_USE_DEFAULT=1 # # # # PERL5LIB path # C:\cpanfly-5.24-64\var\tmp\cpan_build\Test-Script-1.12-EFUqiT\blib\arch # C:\cpanfly-5.24-64\var\tmp\cpan_build\Test-Script-1.12-EFUqiT\blib\lib # C:/cpanfly-5.24-64/var/megalib # C:/cpanfly-5.24-64/var/megalib # # # # perl 5.024000 # ExtUtils::MakeMaker 7.16 # File::Spec 3.62 # IPC::Run3 0.048 # Probe::Perl 0.03 # Test::Builder 1.302026 # Test::Builder::Tester 1.302026 # Test::More 1.302026 You should load Test::Tester before Test::Builder (or anything that loads Test::Builder) at C:/cpanfly-5.24-64/var/megalib/Test/Tester.pm line 9. # Test::Tester 1.302026 # # # # probing IPC::Run3 for rt94685 rt46333 rt95308 gh#9 # IPC::Run3 is borked # # # t/00_diag.t ........................ ok t/01_compile.t ..................... ok t/02_compiles_good.t ............... ok t/03_compiles_bad.t ................ ok t/04_runs_good.t ................... ok t/05_runs_bad.t .................... ok t/06_exception.t ................... ok t/07_signal.t ...................... ok t/08_trap_exit_or_signal.t ......... ok t/09_capture_output.t .............. ok t2/test_script__exports.t .......... ok # # Failed test 'script_compiles t/bin/bad.pl' # at t2/test_script__script_compiles.t line 70. # +----------------+-----+----------------+----+----------------+--------+ # | PATH | LNs | GOT | OP | CHECK | LNs | # +----------------+-----+----------------+----+----------------+--------+ # | | | ARRAY(0x34903a | | | 56, 69 | # | | | 0) | | | | # | | | | | | | # | [3] | 52 | Test2::Event:: | | | 64, 67 | # | | | Diag=HASH(0x34 | | | | # | | | 91a88) | | | | # | | | | | | | # | [3]->message() | | 255 - Bad at t | =~ | (?^:BEGIN fail | 66 | # | | | \bin\bad.pl li | | ed--compilatio | | # | | | ne 4.\n | | n aborted at t | | # | | | BEGIN failed-- | | \bin\bad.pl li | | # | | | compilation ab | | ne 5.) | | # | | | orted at t\bin | | | | # | | | \bad.pl line 5 | | | | # | | | .\n | | | | # +----------------+-----+----------------+----+----------------+--------+ # # Failed test 'script_compiles t/bin/bad.pl It worked' # at t2/test_script__script_compiles.t line 94. # +----------------+-----+----------------+----+----------------+--------+ # | PATH | LNs | GOT | OP | CHECK | LNs | # +----------------+-----+----------------+----+----------------+--------+ # | | | ARRAY(0x46eb90 | | | 80, 93 | # | | | ) | | | | # | | | | | | | # | [3] | 76 | Test2::Event:: | | | 88, 91 | # | | | Diag=HASH(0x34 | | | | # | | | 902b0) | | | | # | | | | | | | # | [3]->message() | | 255 - Bad at t | =~ | (?^:BEGIN fail | 90 | # | | | \bin\bad.pl li | | ed--compilatio | | # | | | ne 4.\n | | n aborted at t | | # | | | BEGIN failed-- | | \bin\bad.pl li | | # | | | compilation ab | | ne 5.) | | # | | | orted at t\bin | | | | # | | | \bad.pl line 5 | | | | # | | | .\n | | | | # +----------------+-----+----------------+----+----------------+--------+ # # Failed test 'bad' # at t2/test_script__script_compiles.t line 99. # Seeded srand with seed '20160615' from local date. # Looks like you failed 1 test of 3. t2/test_script__script_compiles.t .. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/3 subtests t2/test_script__script_runs.t ...... ok Test Summary Report ------------------- t2/test_script__script_compiles.t (Wstat: 256 Tests: 3 Failed: 1) Failed test: 2 Non-zero exit status: 1 Files=13, Tests=48, 258 wallclock secs ( 0.13 usr + 0.02 sys = 0.14 CPU) Result: FAIL Failed 1/13 test programs. 1/48 subtests failed. dmake: Error code 255, while making 'test_dynamic' PLICEASE/Test-Script-1.12.tar.gz dmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PLICEASE/Test-Script-1.12.tar.gz PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz Has already been unwrapped into directory C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz Has already been prepared Running Build for P/PL/PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz Warning: Prerequisite 'Test::Script => 1.09' for 'PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz' failed when processing 'PLICEASE/Test-Script-1.12.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> C:\Perl-5.24-64\bin\perl.exe ./Build Building FFI-Platypus-Lang-Rust PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz C:\Perl-5.24-64\bin\perl.exe ./Build -- OK Running Build test >>> C:\Perl-5.24-64\bin\perl.exe ./Build test verbose=1 libtest directory is included, but not compiler is available some tests may fail if they depend on libtest # # # # ACTIVEPERL_CONFIG_DISABLE=1 # HARNESS_ACTIVE=1 # HARNESS_IS_VERBOSE=1 # HARNESS_VERSION=3.36 # PERL5LIB=C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh\blib\lib;C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh\blib\arch;lib;inc;C:\cpanfly-5.24-64\var\megalib;C:/cpanfly-5.24-64/var/megalib;C:/cpanfly-5.24-64/var/megalib # PERL5_CPANPLUS_IS_RUNNING=2080 # PERL5_CPAN_IS_RUNNING=2080 # PERL5_CPAN_IS_RUNNING_IN_RECURSION=2392,2080 # PERL_DL_NONLAZY=1 # PERL_MM_USE_DEFAULT=1 # # # # PERL5LIB path # C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh\blib\lib # C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh\blib\arch # lib # inc # C:\cpanfly-5.24-64\var\megalib # C:/cpanfly-5.24-64/var/megalib # C:/cpanfly-5.24-64/var/megalib # # # # perl v5.24.0 # Alien::Base 0.028 # Alien::FFI 0.14 # Config::AutoConf 0.313 # ExtUtils::CBuilder 0.280225 # FFI::CheckLib 0.15 # File::ShareDir 1.102 # JSON::PP 2.27400 # Module::Build 0.4218 # PkgConfig 0.12026 # Test::More 1.302026 # FFI::Platypus 0.42 # Module::Which 0.05 # # # t\00_diag.t .............. 1..1 ok 1 - okay ok t\01_use.t ............... 1..1 ok 1 - use FFI::Platypus::Lang::Rust; ok t\02_types.t ............. 1..1 # binary32 float # binary64 double # f32 float # f64 double # i16 sint16 # i32 sint32 # i64 sint64 # i8 sint8 # isize sint64 # u16 uint16 # u32 uint32 # u64 uint64 # u8 uint8 # usize uint64 ok 1 - okay ok Can't locate Test/Script.pm in @INC (you may need to install the Test::Script module) (@INC contains: C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh\blib\lib C:\cpanfly-5.24-64\var\tmp\cpan_build\FFI-Platypus-Lang-Rust-0.04-eQiQFh\blib\arch lib inc C:\cpanfly-5.24-64\var\megalib C:/cpanfly-5.24-64/var/megalib C:/cpanfly-5.24-64/var/megalib C:/Perl-5.24-64/site/lib C:/Perl-5.24-64/lib .) at t\example.t line 4. BEGIN failed--compilation aborted at t\example.t line 4. t\example.t .............. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t\ffi_platypus_attach.t .. skipped: test requires a rust compiler t\lang.t ................. 1..1 # Subtest: Foo constructor 1..5 ok 1 - int is not an okay type # unknown type: int at t\lang.t line 11. ok 2 - foo_t is an okay type ok 3 - sint16 is an okay type ok 4 - sizeof foo_t = 2 ok 5 - sizeof foo_t = 4 ok 1 - Foo constructor ok Test Summary Report ------------------- t\example.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=6, Tests=4, 2 wallclock secs ( 0.06 usr + 0.00 sys = 0.06 CPU) Result: FAIL Failed 1/6 test programs. 0/4 subtests failed. PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz one dependency not OK (Test::Script); additionally test harness failed C:\Perl-5.24-64\bin\perl.exe ./Build test verbose=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PLICEASE/FFI-Platypus-Lang-Rust-0.04.tar.gz Finished 2016-06-15T13:07:21