PATH=C:\mingw\bin;C:\cygwin\bin;C:\cpanfly-5.18\var\megalib\bin;C:\Perl-5.18\site\bin;C:\Perl-5.18\bin;C:\cygwin\bin;C:\Program Files\Perforce;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\instantclient_11_2;C:\cygwin\bin;C:\Program Files\Perforce;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0
Start 2014-03-08T22:20:55
ActivePerl-1800 CPAN-2.00
LIB=C:\PROGRA~1\MICROS~3\VC98\Lib\PSDK
PATH=C:/CPANFL~1.18/var/libs/bin;C:\mingw\bin;C:\cygwin\bin;C:\CPANFL~1.18\var\megalib\bin;C:\Perl-5.18\site\bin;C:\Perl-5.18\bin;C:\cygwin\bin;C:\PROGRA~1\Perforce;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0;C:\WINDOWS\system32\WINDOW~2\v1.0;C:\INSTAN~1;C:\cygwin\bin;C:\PROGRA~1\Perforce;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0;C:\WINDOWS\system32\WINDOW~2\v1.0
Reading 'C:\cpanfly-5.18\var\cpan\Metadata'
  Database was generated on Sun, 09 Mar 2014 03:06:08 GMT
Running make for G/GA/GARROW/Proc-Spawn-1.03.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/G/GA/GARROW/Proc-Spawn-1.03.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/G/GA/GARROW/CHECKSUMS
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\G\GA\GARROW\Proc-Spawn-1.03.tar.gz ok
Proc-Spawn-1.03/
Proc-Spawn-1.03/Spawn.pm
Proc-Spawn-1.03/README
Proc-Spawn-1.03/Makefile.PL
Proc-Spawn-1.03/Changes
Proc-Spawn-1.03/MANIFEST
Proc-Spawn-1.03/t/
Proc-Spawn-1.03/t/basic.t

  CPAN.pm: Building G/GA/GARROW/Proc-Spawn-1.03.tar.gz

>>> C:\Perl-5.18\bin\perl.exe Makefile.PL
Warning: prerequisite IO::Pty 0 not found.
Checking if your kit is complete...
Looks good
Generating a dmake-style Makefile
Writing Makefile for Proc::Spawn
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
----       GARROW/Proc-Spawn-1.03.tar.gz      ----
    IO::Pty [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'IO::Pty'
Running make for T/TO/TODDR/IO-Tty-1.10.tar.gz
Checksum for C:\cpanfly-5.18\var\cpan\sources\authors\id\T\TO\TODDR\IO-Tty-1.10.tar.gz ok
IO-Tty-1.10/
IO-Tty-1.10/ChangeLog
IO-Tty-1.10/MANIFEST
IO-Tty-1.10/META.yml
IO-Tty-1.10/Makefile.PL
IO-Tty-1.10/Pty.pm
IO-Tty-1.10/README
IO-Tty-1.10/Tty.pm
IO-Tty-1.10/Tty.xs
IO-Tty-1.10/t/
IO-Tty-1.10/t/test.t
IO-Tty-1.10/try

  CPAN.pm: Building T/TO/TODDR/IO-Tty-1.10.tar.gz

>>> C:\Perl-5.18\bin\perl.exe Makefile.PL
Now let's see what we can find out about your system
(logfiles of failing tests are available in the conf/ dir)...
Looking for _getpty()...... not found.
Looking for getpt()........ not found.
Looking for grantpt()...... not found.
Looking for openpty()...... not found.
Looking for posix_openpt(). not found.
Looking for ptsname()...... not found.
Looking for ptsname_r().... not found.
Looking for sigaction().... not found.
Looking for strlcpy()...... not found.
Looking for ttyname()...... not found.
Looking for unlockpt()..... not found.
Looking for libutil.h...... not found.
Looking for pty.h.......... not found.
Looking for sys/pty.h...... not found.
Looking for sys/ptyio.h.... not found.
Looking for sys/stropts.h.. not found.
Looking for termio.h....... not found.
Looking for termios.h...... not found.
Looking for util.h......... not found.
Checking which symbols compile OK...
(sorry for the tedious check, but some systems have not too clean
 header files, to say the least;  '+' means OK, '-' means not defined
 and '*' has compile problems...)
-B0 -B110 -B115200 -B1200 -B134 -B150 -B153600 -B1800 -B19200 -B200 -B230400 -B2400 -B300 -B307200 -B38400 -B460800 -B4800 -B50 -B57600 -B600 -B75 -B76800 -B9600 -BRKINT -BS0 -BS1 -BSDLY -CBAUD -CBAUDEXT -CBRK -CCTS_OFLOW -CDEL -CDSUSP -CEOF -CEOL -CEOL2 -CEOT -CERASE -CESC -CFLUSH -CIBAUD -CIBAUDEXT -CINTR -CKILL -CLNEXT -CLOCAL -CNSWTCH -CNUL -CQUIT -CR0 -CR1 -CR2 -CR3 -CRDLY -CREAD -CRPRNT -CRTSCTS -CRTSXOFF -CRTS_IFLOW -CS5 -CS6 -CS7 -CS8 -CSIZE -CSTART -CSTOP -CSTOPB -CSUSP -CSWTCH -CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE -ECHO -ECHOCTL -ECHOE -ECHOK -ECHOKE -ECHONL -ECHOPRT -EXTA -EXTB -FF0 -FF1 -FFDLY -FIORDCHK -FLUSHO -HUPCL -ICANON -ICRNL -IEXTEN -IGNBRK -IGNCR -IGNPAR -IMAXBEL -INLCR -INPCK -ISIG -ISTRIP -IUCLC -IXANY -IXOFF -IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK -NCCS -NL0 -NL1 -NLDLY -NOFLSH -OCRNL -OFDEL -OFILL -OLCUC -ONLCR -ONLRET -ONOCR -OPOST -PAGEOUT -PARENB -PAREXT -PARMRK -PARODD -PENDIN -RCV1EN -RTS_TOG -TAB0 -TAB1 -TAB2 -TAB3 -TABDLY -TCDSET -TCFLSH -TCGETA -TCGETS -TCIFLUSH -TCIOFF -TCIOFLUSH -TCION -TCOFLUSH -TCOOFF -TCOON -TCSADRAIN -TCSAFLUSH -TCSANOW -TCSBRK -TCSETA -TCSETAF -TCSETAW -TCSETCTTY -TCSETS -TCSETSF -TCSETSW -TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 -TIOCCBRK -TIOCCDTR -TIOCCONS -TIOCEXCL -TIOCFLUSH -TIOCGETC -TIOCGETD -TIOCGETP -TIOCGLTC -TIOCGPGRP -TIOCGSID -TIOCGSOFTCAR -TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET -TIOCMBIC -TIOCMBIS -TIOCMGET -TIOCMSET -TIOCM_CAR -TIOCM_CD -TIOCM_CTS -TIOCM_DSR -TIOCM_DTR -TIOCM_LE -TIOCM_RI -TIOCM_RNG -TIOCM_RTS -TIOCM_SR -TIOCM_ST -TIOCNOTTY -TIOCNXCL -TIOCOUTQ -TIOCREMOTE -TIOCSBRK -TIOCSCTTY -TIOCSDTR -TIOCSETC -TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC -TIOCSPGRP -TIOCSSID -TIOCSSOFTCAR -TIOCSTART -TIOCSTI -TIOCSTOP -TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL -TOSTOP -VCEOF -VCEOL -VDISCARD -VDSUSP -VEOF -VEOL -VEOL2 -VERASE -VINTR -VKILL -VLNEXT -VMIN -VQUIT -VREPRINT -VSTART -VSTOP -VSUSP -VSWTCH -VT0 -VT1 -VTDLY -VTIME -VWERASE -WRAP -XCASE -XCLUDE -XMT1EN -XTABS 

WARNING!  Neither ptsname() nor ptsname_r() could be found,
 so we cannot use a high-level interface like openpty().
No high-level lib or clone device has been found, we will use BSD-style ptys.
Writing IO::Tty::Constant.pm...
DEFINE = 
Checking if your kit is complete...
Looks good
Generating a dmake-style Makefile
Writing Makefile for IO::Tty
Writing MYMETA.yml and MYMETA.json
>>> dmake
cp Tty/Constant.pm blib\lib\IO\Tty\Constant.pm
cp Pty.pm blib\lib\IO\Pty.pm
cp Tty.pm blib\lib\IO\Tty.pm
Running Mkbootstrap for IO::Tty ()
C:\Perl-5.18\bin\perl.exe -MExtUtils::Command -e chmod -- 644 Tty.bs
C:\Perl-5.18\bin\perl.exe C:\cpanfly-5.18\var\megalib\ExtUtils\xsubpp  -typemap C:\Perl-5.18\lib\ExtUtils\typemap  Tty.xs > Tty.xsc && C:\Perl-5.18\bin\perl.exe -MExtUtils::Command -e mv -- Tty.xsc Tty.c
gcc -c   	-s -O2 -DWIN32 -DPERL_TEXTMODE_SCRIPTS -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -fno-strict-aliasing -mms-bitfields -s -O2 	  -DVERSION=\"1.10\" 	-DXS_VERSION=\"1.10\"  "-IC:\Perl-5.18\lib\CORE"   Tty.c
Tty.xs:54:23: fatal error: sys/ioctl.h: No such file or directory
compilation terminated.
dmake:  Error code 129, while making 'Tty.o'
  TODDR/IO-Tty-1.10.tar.gz
  dmake -- NOT OK
Running make test
  Can't test without successful make
Running make for G/GA/GARROW/Proc-Spawn-1.03.tar.gz
  Has already been unwrapped into directory C:\cpanfly-5.18\var\cpan\build\Proc-Spawn-1.03-2YNOPK

  CPAN.pm: Building G/GA/GARROW/Proc-Spawn-1.03.tar.gz

Warning: Prerequisite 'IO::Pty => 0' for 'GARROW/Proc-Spawn-1.03.tar.gz' failed when processing 'TODDR/IO-Tty-1.10.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
>>> dmake
cp Spawn.pm blib\lib\Proc\Spawn.pm
  GARROW/Proc-Spawn-1.03.tar.gz
  dmake -- OK
Running make test
>>> dmake test TEST_VERBOSE=1
C:\Perl-5.18\bin\perl.exe "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
Parameterless "use IO" deprecated at C:\cpanfly-5.18\var\cpan\build\Proc-Spawn-1.03-2YNOPK\blib\lib/Proc/Spawn.pm line 6.
Can't locate IO/Pty.pm in @INC (you may need to install the IO::Pty module) (@INC contains: C:\cpanfly-5.18\var\cpan\build\Proc-Spawn-1.03-2YNOPK\blib\lib C:\cpanfly-5.18\var\cpan\build\Proc-Spawn-1.03-2YNOPK\blib\arch C:/cpanfly-5.18/var/megalib C:/cpanfly-5.18/var/megalib C:/Perl-5.18/site/lib C:/Perl-5.18/lib .) at C:\cpanfly-5.18\var\cpan\build\Proc-Spawn-1.03-2YNOPK\blib\lib/Proc/Spawn.pm line 7.
BEGIN failed--compilation aborted at C:\cpanfly-5.18\var\cpan\build\Proc-Spawn-1.03-2YNOPK\blib\lib/Proc/Spawn.pm line 7.
Compilation failed in require at t/basic.t line 5.
BEGIN failed--compilation aborted at t/basic.t line 5.
t/basic.t .. 
1..5
Dubious, test returned 2 (wstat 512, 0x200)
Failed 5/5 subtests 

Test Summary Report
-------------------
t/basic.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 5 tests but ran 0.
Files=1, Tests=0,  0 wallclock secs ( 0.03 usr +  0.03 sys =  0.06 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
dmake:  Error code 130, while making 'test_dynamic'
  GARROW/Proc-Spawn-1.03.tar.gz
one dependency not OK (IO::Pty); additionally test harness failed
  dmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports GARROW/Proc-Spawn-1.03.tar.gz
Finished 2014-03-08T22:21:53