PATH=C:\cpanfly-5.22-32\var\megalib\bin;C:\Perl-5.22-32\site\bin;C:\Perl-5.22-32\bin;C:\MinGW-32\bin;C:\cygwin\bin;C:\instantclient_11_2-32;C:\cpanfly-5.22-32\var\megalib\bin;C:\Perl-5.22-32\site\bin;C:\Perl-5.22-32\bin;C:\MinGW-32\bin;C:\cygwin\bin;C:\instantclient_11_2-32;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Git\cmd;C:\Program Files (x86)\CMake\bin
Start 2017-04-09T03:07:44
ActivePerl-2201 CPAN-2.10
PATH=C:/CPANFL~3.22-/var/libs/bin;C:\CPANFL~3.22-\var\megalib\bin;C:\PERL-5~1.22-\site\bin;C:\PERL-5~1.22-\bin;C:\MinGW-32\bin;C:\cygwin\bin;C:\INSTAN~3;C:\CPANFL~3.22-\var\megalib\bin;C:\PERL-5~1.22-\site\bin;C:\PERL-5~1.22-\bin;C:\MinGW-32\bin;C:\cygwin\bin;C:\INSTAN~3;C:\p4;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WINDOW~1\v1.0\;C:\PROGRA~1\Git\cmd;C:\PROGRA~2\CMake\bin
Reading 'C:\cpanfly-5.22-32\var\cpan\Metadata'
  Database was generated on Sat, 08 Apr 2017 05:29:03 GMT
Checksum for C:\cpanfly-5.22-32\var\cpan\sources\authors\id\P\PE\PERLANCAR\Perinci-CmdLine-Any-0.13.tar.gz ok
Perinci-CmdLine-Any-0.13/
Perinci-CmdLine-Any-0.13/README
Perinci-CmdLine-Any-0.13/dist.ini
Perinci-CmdLine-Any-0.13/Makefile.PL
Perinci-CmdLine-Any-0.13/META.yml
Perinci-CmdLine-Any-0.13/t/
Perinci-CmdLine-Any-0.13/t/author-pod-syntax.t
Perinci-CmdLine-Any-0.13/t/00-compile.t
Perinci-CmdLine-Any-0.13/t/author-pod-coverage.t
Perinci-CmdLine-Any-0.13/weaver.ini
Perinci-CmdLine-Any-0.13/META.json
Perinci-CmdLine-Any-0.13/MANIFEST
Perinci-CmdLine-Any-0.13/lib/
Perinci-CmdLine-Any-0.13/lib/Perinci/
Perinci-CmdLine-Any-0.13/lib/Perinci/CmdLine/
Perinci-CmdLine-Any-0.13/lib/Perinci/CmdLine/Any.pm
Perinci-CmdLine-Any-0.13/LICENSE
Perinci-CmdLine-Any-0.13/Changes
Configuring P/PE/PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz with Makefile.PL
>>> C:\Perl-5.22-32\bin\perl.exe Makefile.PL
Warning: prerequisite Perinci::CmdLine::Lite 1.56 not found.
Checking if your kit is complete...
Looks good
Have \cpanfl~3.22-\var\megalib
Want \perl-5~1.22-\lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [MSWin32-x86-multi-thread-64int]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a dmake-style Makefile
Writing Makefile for Perinci::CmdLine::Any
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz
  C:\Perl-5.22-32\bin\perl.exe Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz
----  Unsatisfied dependencies detected during ----
---- PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz ----
    Perinci::CmdLine::Lite [requires]
Running test for module 'Perinci::CmdLine::Lite'
Checksum for C:\cpanfly-5.22-32\var\cpan\sources\authors\id\P\PE\PERLANCAR\Perinci-CmdLine-Lite-1.72.tar.gz ok
Perinci-CmdLine-Lite-1.72/
Perinci-CmdLine-Lite-1.72/README
Perinci-CmdLine-Lite-1.72/dist.ini
Perinci-CmdLine-Lite-1.72/Makefile.PL
Perinci-CmdLine-Lite-1.72/META.yml
Perinci-CmdLine-Lite-1.72/t/
Perinci-CmdLine-Lite-1.72/t/author-pod-syntax.t
Perinci-CmdLine-Lite-1.72/t/00-compile.t
Perinci-CmdLine-Lite-1.72/t/suite.t
Perinci-CmdLine-Lite-1.72/t/author-pod-coverage.t
Perinci-CmdLine-Lite-1.72/weaver.ini
Perinci-CmdLine-Lite-1.72/META.json
Perinci-CmdLine-Lite-1.72/share/
Perinci-CmdLine-Lite-1.72/share/templates/
Perinci-CmdLine-Lite-1.72/share/templates/description.txt
Perinci-CmdLine-Lite-1.72/share/templates/synopsis.txt
Perinci-CmdLine-Lite-1.72/MANIFEST
Perinci-CmdLine-Lite-1.72/lib/
Perinci-CmdLine-Lite-1.72/lib/Perinci/
Perinci-CmdLine-Lite-1.72/lib/Perinci/CmdLine/
Perinci-CmdLine-Lite-1.72/lib/Perinci/CmdLine/Base.pm
Perinci-CmdLine-Lite-1.72/lib/Perinci/CmdLine/Lite.pm
Perinci-CmdLine-Lite-1.72/LICENSE
Perinci-CmdLine-Lite-1.72/devscripts/
Perinci-CmdLine-Lite-1.72/devscripts/bench-startup
Perinci-CmdLine-Lite-1.72/Changes
Configuring P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.72.tar.gz with Makefile.PL
>>> C:\Perl-5.22-32\bin\perl.exe Makefile.PL
Warning: prerequisite Perinci::Sub::Complete 0.89 not found. We have 0.84.
Checking if your kit is complete...
Looks good
Have \cpanfl~3.22-\var\megalib
Want \perl-5~1.22-\lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [MSWin32-x86-multi-thread-64int]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a dmake-style Makefile
Writing Makefile for Perinci::CmdLine::Lite
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Perinci-CmdLine-Lite-1.72.tar.gz
  C:\Perl-5.22-32\bin\perl.exe Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.72.tar.gz
----  Unsatisfied dependencies detected during  ----
---- PERLANCAR/Perinci-CmdLine-Lite-1.72.tar.gz ----
    Perinci::Sub::Complete [requires]
    YAML::Old [build_requires]
    Test::Perinci::CmdLine [build_requires]
Running test for module 'Perinci::Sub::Complete'
Checksum for C:\cpanfly-5.22-32\var\cpan\sources\authors\id\P\PE\PERLANCAR\Perinci-Sub-Complete-0.91.tar.gz ok
Perinci-Sub-Complete-0.91/
Perinci-Sub-Complete-0.91/META.json
Perinci-Sub-Complete-0.91/LICENSE
Perinci-Sub-Complete-0.91/Changes
Perinci-Sub-Complete-0.91/META.yml
Perinci-Sub-Complete-0.91/Makefile.PL
Perinci-Sub-Complete-0.91/t/
Perinci-Sub-Complete-0.91/t/author-pod-coverage.t
Perinci-Sub-Complete-0.91/t/complete_arg_index.t
Perinci-Sub-Complete-0.91/t/complete_cli_arg.t
Perinci-Sub-Complete-0.91/t/complete_from_schema.t
Perinci-Sub-Complete-0.91/t/complete_arg_elem.t
Perinci-Sub-Complete-0.91/t/complete_arg_val.t
Perinci-Sub-Complete-0.91/t/release-rinci.t
Perinci-Sub-Complete-0.91/t/author-pod-syntax.t
Perinci-Sub-Complete-0.91/t/00-compile.t
Perinci-Sub-Complete-0.91/README
Perinci-Sub-Complete-0.91/dist.ini
Perinci-Sub-Complete-0.91/lib/
Perinci-Sub-Complete-0.91/lib/Perinci/
Perinci-Sub-Complete-0.91/lib/Perinci/Sub/
Perinci-Sub-Complete-0.91/lib/Perinci/Sub/Complete.pm
Perinci-Sub-Complete-0.91/MANIFEST
Perinci-Sub-Complete-0.91/weaver.ini
Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz with Makefile.PL
>>> C:\Perl-5.22-32\bin\perl.exe Makefile.PL
Warning: prerequisite Complete::Getopt::Long 0.43 not found. We have 0.41.
Checking if your kit is complete...
Looks good
Have \cpanfl~3.22-\var\megalib
Want \perl-5~1.22-\lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [MSWin32-x86-multi-thread-64int]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a dmake-style Makefile
Writing Makefile for Perinci::Sub::Complete
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
  C:\Perl-5.22-32\bin\perl.exe Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
----  Unsatisfied dependencies detected during  ----
---- PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz ----
    Complete::Getopt::Long [requires]
Running test for module 'Complete::Getopt::Long'
Checksum for C:\cpanfly-5.22-32\var\cpan\sources\authors\id\P\PE\PERLANCAR\Complete-Getopt-Long-0.46.tar.gz ok
Complete-Getopt-Long-0.46/
Complete-Getopt-Long-0.46/README
Complete-Getopt-Long-0.46/dist.ini
Complete-Getopt-Long-0.46/Makefile.PL
Complete-Getopt-Long-0.46/META.yml
Complete-Getopt-Long-0.46/t/
Complete-Getopt-Long-0.46/t/author-pod-syntax.t
Complete-Getopt-Long-0.46/t/release-rinci.t
Complete-Getopt-Long-0.46/t/00-compile.t
Complete-Getopt-Long-0.46/t/author-pod-coverage.t
Complete-Getopt-Long-0.46/t/complete_cli_arg.t
Complete-Getopt-Long-0.46/weaver.ini
Complete-Getopt-Long-0.46/META.json
Complete-Getopt-Long-0.46/MANIFEST
Complete-Getopt-Long-0.46/lib/
Complete-Getopt-Long-0.46/lib/Complete/
Complete-Getopt-Long-0.46/lib/Complete/Getopt/
Complete-Getopt-Long-0.46/lib/Complete/Getopt/Long.pm
Complete-Getopt-Long-0.46/LICENSE
Complete-Getopt-Long-0.46/Changes
Configuring P/PE/PERLANCAR/Complete-Getopt-Long-0.46.tar.gz with Makefile.PL
>>> C:\Perl-5.22-32\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Have \cpanfl~3.22-\var\megalib
Want \perl-5~1.22-\lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [MSWin32-x86-multi-thread-64int]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a dmake-style Makefile
Writing Makefile for Complete::Getopt::Long
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Complete-Getopt-Long-0.46.tar.gz
  C:\Perl-5.22-32\bin\perl.exe Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Complete-Getopt-Long-0.46.tar.gz
>>> dmake
cp lib/Complete/Getopt/Long.pm blib\lib\Complete\Getopt\Long.pm
  PERLANCAR/Complete-Getopt-Long-0.46.tar.gz
  dmake -- OK
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl-5.22-32\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/00-compile.t ........... 
1..1
ok 1 - Complete/Getopt/Long.pm loaded ok
ok
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
        # Child (file fallback completion) exited without calling finalize()
    
    #   Failed test 'file fallback completion'
    #   at C:/cpanfly-5.22-32/var/megalib/Test/Builder.pm line 279.
Can't locate Complete/Setting.pm in @INC (you may need to install the Complete::Setting module) (@INC contains: C:\cpanfly-5.22-32\var\tmp\cpan_build\Complete-Getopt-Long-0.46-F6KoQx\blib\lib C:\cpanfly-5.22-32\var\tmp\cpan_build\Complete-Getopt-Long-0.46-F6KoQx\blib\arch C:/cpanfly-5.22-32/var/megalib C:/cpanfly-5.22-32/var/megalib C:/Perl-5.22-32/site/lib C:/Perl-5.22-32/lib .) at C:/cpanfly-5.22-32/var/megalib/Complete/Env.pm line 10.
BEGIN failed--compilation aborted at C:/cpanfly-5.22-32/var/megalib/Complete/Env.pm line 10.
Compilation failed in require at C:\cpanfly-5.22-32\var\tmp\cpan_build\Complete-Getopt-Long-0.46-F6KoQx\blib\lib/Complete/Getopt/Long.pm line 20.
    # Child (default fallback completion) exited without calling finalize()

#   Failed test 'default fallback completion'
#   at C:/cpanfly-5.22-32/var/megalib/Test/Builder.pm line 279.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 3.
t/complete_cli_arg.t ..... 
    # Subtest: basics
        # Subtest: option name
        ok 1 - result
        1..1
    ok 1 - option name
        # Subtest: option name (2)
        ok 1 - result
        1..1
    ok 2 - option name (2)
        # Subtest: option name (3)
        ok 1 - result
        1..1
    ok 3 - option name (3)
        # Subtest: option name (single letter n! does not get --nox and --no-x)
        ok 1 - result
        1..1
    ok 4 - option name (single letter n! does not get --nox and --no-x)
        # Subtest: option name (bundling)
        ok 1 - result
        1..1
    ok 5 - option name (bundling)
        # Subtest: option name (bundling 2)
        ok 1 - result
        1..1
    ok 6 - option name (bundling 2)
        # Subtest: option name (bundling 3)
        ok 1 - result
        1..1
    ok 7 - option name (bundling 3)
        # Subtest: option name (bundling 4)
        ok 1 - result
        1..1
    ok 8 - option name (bundling 4)
        # Subtest: option name (bundling), bundling=0
        ok 1 - result
        1..1
    ok 9 - option name (bundling), bundling=0
        # Subtest: option name (bundling, stops after value expected)
        ok 1 - result
        1..1
    ok 10 - option name (bundling, stops after value expected)
        # Subtest: option value (bundling)
        ok 1 - result
        1..1
    ok 11 - option value (bundling)
        # Subtest: option name (bundling 1)
        ok 1 - result
        1..1
    ok 12 - option name (bundling 1)
        # Subtest: option name (bundling 1b)
        ok 1 - result
        1..1
    ok 13 - option name (bundling 1b)
        # Subtest: option name (bundling 5)
        ok 1 - result
        1..1
    ok 14 - option name (bundling 5)
        # Subtest: option name with mentioned non-repeatable option (alias)
        ok 1 - result
        1..1
    ok 15 - option name with mentioned non-repeatable option (alias)
        # Subtest: option name with mentioned non-repeatable option (alias 2)
        ok 1 - result
        1..1
    ok 16 - option name with mentioned non-repeatable option (alias 2)
        # Subtest: option name with mentioned non-repeatable option (bundling)
        ok 1 - result
        1..1
    ok 17 - option name with mentioned non-repeatable option (bundling)
        # Subtest: repeatable option name 1 (assigned to arrayref)
        ok 1 - result
        1..1
    ok 18 - repeatable option name 1 (assigned to arrayref)
        # Subtest: repeatable option name 2 (desttype @)
        ok 1 - result
        1..1
    ok 19 - repeatable option name 2 (desttype @)
        # Subtest: repeatable option name 3 (desttype %)
        ok 1 - result
        1..1
    ok 20 - repeatable option name 3 (desttype %)
        # Subtest: repeatable option name 4 (incremental)
        ok 1 - result
        1..1
    ok 21 - repeatable option name 4 (incremental)
        # Subtest: option name + arg completion
        ok 1 - result
        1..1
    ok 22 - option name + arg completion
        # Subtest: option name only (user types -)
        ok 1 - result
        1..1
    ok 23 - option name only (user types -)
        # Subtest: option value without completion routine
        ok 1 - result
        1..1
    ok 24 - option value without completion routine
        # Subtest: option value without completion routine (2)
        ok 1 - result
        1..1
    ok 25 - option value without completion routine (2)
        # Subtest: option value for unknown option
        ok 1 - result
        1..1
    ok 26 - option value for unknown option
        # Subtest: option value for option that does not expect value
        ok 1 - result
        1..1
    ok 27 - option value for option that does not expect value
        # Subtest: option value with completion routine returning array
        ok 1 - result
        1..1
    ok 28 - option value with completion routine returning array
        # Subtest: extras argument
        ok 1 - result
        1..1
    ok 29 - extras argument
    1..29
ok 1 - basics
    # Subtest: config bundling=0
        # Subtest: basics
        ok 1 - result
        1..1
    ok 1 - basics
    1..1
ok 2 - config bundling=0
    # Subtest: default fallback completion
        # Subtest: file fallback completion
    not ok 1 - file fallback completion
not ok 3 - default fallback completion
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/3 subtests 
t/release-rinci.t ........ skipped: these tests are for release candidate testing

Test Summary Report
-------------------
t/complete_cli_arg.t   (Wstat: 512 Tests: 3 Failed: 1)
  Failed test:  3
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
Files=5, Tests=4,  1 wallclock secs ( 0.08 usr +  0.03 sys =  0.11 CPU)
Result: FAIL
Failed 1/5 test programs. 1/4 subtests failed.
dmake:  Error code 255, while making 'test_dynamic'
  PERLANCAR/Complete-Getopt-Long-0.46.tar.gz
  dmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports PERLANCAR/Complete-Getopt-Long-0.46.tar.gz
  PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
  Has already been unwrapped into directory C:\cpanfly-5.22-32\var\tmp\cpan_build\Perinci-Sub-Complete-0.91-WiGjsS
  PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
  Has already been prepared
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
Warning: Prerequisite 'Complete::Getopt::Long => 0.43' for 'PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz' failed when processing 'PERLANCAR/Complete-Getopt-Long-0.46.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
>>> dmake
cp lib/Perinci/Sub/Complete.pm blib\lib\Perinci\Sub\Complete.pm
  PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
  dmake -- OK
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl-5.22-32\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/00-compile.t ............ 
1..1
ok 1 - Perinci/Sub/Complete.pm loaded ok
ok
t/author-pod-coverage.t ... skipped: these tests are for testing by the author
t/author-pod-syntax.t ..... skipped: these tests are for testing by the author
t/complete_arg_elem.t ..... 
ok 1
1..1
ok
t/complete_arg_index.t .... 
ok 1
1..1
ok
t/complete_arg_val.t ...... 
ok 1
1..1
ok
Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: C:\cpanfly-5.22-32\var\tmp\cpan_build\Perinci-Sub-Complete-0.91-WiGjsS\blib\lib C:\cpanfly-5.22-32\var\tmp\cpan_build\Perinci-Sub-Complete-0.91-WiGjsS\blib\arch C:/cpanfly-5.22-32/var/megalib C:/cpanfly-5.22-32/var/megalib C:/Perl-5.22-32/site/lib C:/Perl-5.22-32/lib .) at C:/cpanfly-5.22-32/var/megalib/Perinci/Sub/Normalize.pm line 144.
t/complete_cli_arg.t ...... 
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run 
t/complete_from_schema.t .. 
    # Subtest: schema must be normalized
    ok 1
    1..1
ok 1 - schema must be normalized
    # Subtest: is clause
    ok 1
    ok 2
    1..2
ok 2 - is clause
    # Subtest: in clause
    ok 1
    1..1
ok 3 - in clause
    # Subtest: int
        # Subtest: min/max below limit
        ok 1
        1..1
    ok 1 - min/max below limit
        # Subtest: min/xmax below limit
        ok 1
        1..1
    ok 2 - min/xmax below limit
        # Subtest: xmin/max below limit
        ok 1
        1..1
    ok 3 - xmin/max below limit
        # Subtest: xmin/xmax below limit
        ok 1
        1..1
    ok 4 - xmin/xmax below limit
        # Subtest: between below limit
        ok 1
        1..1
    ok 5 - between below limit
        # Subtest: xbetween below limit
        ok 1
        1..1
    ok 6 - xbetween below limit
        # Subtest: digit by digit completion
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        ok 6
        ok 7
        1..7
    ok 7 - digit by digit completion
        # Subtest: digit by digit completion, with min/max
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        1..5
    ok 8 - digit by digit completion, with min/max
    1..8
ok 4 - int
    # Subtest: float
        # Subtest: digit by digit completion
        ok 1
        ok 2
        ok 3
        ok 4
        ok 5
        ok 6
        ok 7
        1..7
    ok 1 - digit by digit completion
        # Subtest: digit by digit completion, with min/max
        ok 1
        ok 2
        ok 3
        ok 4
        1..4
    ok 2 - digit by digit completion, with min/max
    1..2
ok 5 - float
    # Subtest: any
    ok 1
    ok 2
    1..2
ok 6 - any
    # Subtest: schema is based on other schema
    ok 1
    ok 2
    ok 3
    1..3
ok 7 - schema is based on other schema
1..7
ok
t/release-rinci.t ......... skipped: these tests are for release candidate testing

Test Summary Report
-------------------
t/complete_cli_arg.t    (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
Files=9, Tests=11,  1 wallclock secs ( 0.08 usr +  0.03 sys =  0.11 CPU)
Result: FAIL
Failed 1/9 test programs. 0/11 subtests failed.
dmake:  Error code 255, while making 'test_dynamic'
  PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
  dmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports PERLANCAR/Perinci-Sub-Complete-0.91.tar.gz
Running test for module 'YAML::Old'
Checksum for C:\cpanfly-5.22-32\var\cpan\sources\authors\id\I\IN\INGY\YAML-Old-1.07.tar.gz ok
YAML-Old-1.07/
YAML-Old-1.07/META.yml
YAML-Old-1.07/LICENSE
YAML-Old-1.07/Makefile.PL
YAML-Old-1.07/README
YAML-Old-1.07/t/
YAML-Old-1.07/t/dump-perl-types-512.t
YAML-Old-1.07/t/load-spec.t
YAML-Old-1.07/t/dump-file-utf8.t
YAML-Old-1.07/t/node-info.t
YAML-Old-1.07/t/dump-stringify.t
YAML-Old-1.07/t/inbox.t
YAML-Old-1.07/t/basic-tests.t
YAML-Old-1.07/t/references.t
YAML-Old-1.07/t/dump-code.t
YAML-Old-1.07/t/dump-works.t
YAML-Old-1.07/t/load-passes.t
YAML-Old-1.07/t/2-scalars.t
YAML-Old-1.07/t/dump-file.t
YAML-Old-1.07/t/regexp.t
YAML-Old-1.07/t/dump-tests-512.t
YAML-Old-1.07/t/load-fails.t
YAML-Old-1.07/t/bugs-emailed.t
YAML-Old-1.07/t/dump-nested.t
YAML-Old-1.07/t/dump-synopsis.t
YAML-Old-1.07/t/dump-basics.t
YAML-Old-1.07/t/marshall.t
YAML-Old-1.07/t/TestYAMLBase.pm
YAML-Old-1.07/t/load-slides.t
YAML-Old-1.07/t/dump-opts.t
YAML-Old-1.07/t/dump-perl-types.t
YAML-Old-1.07/t/release-pod-syntax.t
YAML-Old-1.07/t/freeze-thaw.t
YAML-Old-1.07/t/changes.t
YAML-Old-1.07/t/export.t
YAML-Old-1.07/t/TestYAML.pm
YAML-Old-1.07/t/long-quoted-value.yaml
YAML-Old-1.07/t/dump-perl-types-514.t
YAML-Old-1.07/t/global-api.t
YAML-Old-1.07/t/svk.t
YAML-Old-1.07/t/dump-tests.t
YAML-Old-1.07/t/bugs-rt.t
YAML-Old-1.07/t/000-compile-modules.t
YAML-Old-1.07/t/test.t
YAML-Old-1.07/t/load-works.t
YAML-Old-1.07/t/rt-90593.t
YAML-Old-1.07/t/dump-tests-514.t
YAML-Old-1.07/t/pugs-objects.t
YAML-Old-1.07/t/svk-config.yaml
YAML-Old-1.07/t/load-tests.t
YAML-Old-1.07/t/dump-blessed.t
YAML-Old-1.07/t/errors.t
YAML-Old-1.07/xt/
YAML-Old-1.07/xt/pmv.t
YAML-Old-1.07/xt/meta.t
YAML-Old-1.07/xt/pod.t
YAML-Old-1.07/lib/
YAML-Old-1.07/lib/YAML/
YAML-Old-1.07/lib/YAML/Old.pm
YAML-Old-1.07/lib/YAML/Old.pod
YAML-Old-1.07/lib/YAML/Old/
YAML-Old-1.07/lib/YAML/Old/Dumper.pm
YAML-Old-1.07/lib/YAML/Old/Marshall.pm
YAML-Old-1.07/lib/YAML/Old/Loader.pm
YAML-Old-1.07/lib/YAML/Old/Tag.pm
YAML-Old-1.07/lib/YAML/Old/Mo.pm
YAML-Old-1.07/lib/YAML/Old/Types.pm
YAML-Old-1.07/lib/YAML/Old/Error.pm
YAML-Old-1.07/lib/YAML/Old/Node.pm
YAML-Old-1.07/lib/YAML/Old/Loader/
YAML-Old-1.07/lib/YAML/Old/Loader/Base.pm
YAML-Old-1.07/lib/YAML/Old/Dumper/
YAML-Old-1.07/lib/YAML/Old/Dumper/Base.pm
YAML-Old-1.07/MANIFEST
YAML-Old-1.07/Changes
YAML-Old-1.07/CONTRIBUTING
YAML-Old-1.07/META.json
Configuring I/IN/INGY/YAML-Old-1.07.tar.gz with Makefile.PL
>>> C:\Perl-5.22-32\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Have \cpanfl~3.22-\var\megalib
Want \perl-5~1.22-\lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [MSWin32-x86-multi-thread-64int]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a dmake-style Makefile
Writing Makefile for YAML::Old
Writing MYMETA.yml and MYMETA.json
  INGY/YAML-Old-1.07.tar.gz
  C:\Perl-5.22-32\bin\perl.exe Makefile.PL -- OK
Running make for I/IN/INGY/YAML-Old-1.07.tar.gz
>>> dmake
cp lib/YAML/Old/Loader/Base.pm blib\lib\YAML\Old\Loader\Base.pm
cp lib/YAML/Old/Loader.pm blib\lib\YAML\Old\Loader.pm
cp lib/YAML/Old/Mo.pm blib\lib\YAML\Old\Mo.pm
cp lib/YAML/Old/Marshall.pm blib\lib\YAML\Old\Marshall.pm
cp lib/YAML/Old/Error.pm blib\lib\YAML\Old\Error.pm
cp lib/YAML/Old/Types.pm blib\lib\YAML\Old\Types.pm
cp lib/YAML/Old/Tag.pm blib\lib\YAML\Old\Tag.pm
cp lib/YAML/Old/Node.pm blib\lib\YAML\Old\Node.pm
cp lib/YAML/Old/Dumper/Base.pm blib\lib\YAML\Old\Dumper\Base.pm
cp lib/YAML/Old.pm blib\lib\YAML\Old.pm
cp lib/YAML/Old/Dumper.pm blib\lib\YAML\Old\Dumper.pm
cp lib/YAML/Old.pod blib\lib\YAML\Old.pod
  INGY/YAML-Old-1.07.tar.gz
  dmake -- OK
Running make test
>>> dmake test TEST_VERBOSE=1
"C:\Perl-5.22-32\bin\perl.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
t/000-compile-modules.t .. 
ok 1 - use YAML::Old;
ok 2 - use YAML::Old::Dumper;
ok 3 - use YAML::Old::Error;
ok 4 - use YAML::Old::Loader;
ok 5 - use YAML::Old::Marshall;
ok 6 - use YAML::Old::Mo;
ok 7 - use YAML::Old::Node;
ok 8 - use YAML::Old::Tag;
ok 9 - use YAML::Old::Types;
ok 10 - use YAML::Old::Dumper::Base;
ok 11 - use YAML::Old::Loader::Base;
1..11
ok
t/2-scalars.t ............ 
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
1..10
ok
t/basic-tests.t .......... 
1..4
ok 1 - A simple map
ok 2 - Common String Types
ok 3 - Multiple documents
ok 4 - Comments
ok
t/bugs-emailed.t ......... 
1..25
ok 1 - Date: Tue, 03 Jan 2006 18:04:56 (n->y)
ok 2 - Date: Tue, 03 Jan 2006 18:04:56 (y->n)
ok 3 - Date: Wed, 04 Jan 2006 10:23:18 (n->y)
ok 4 - Date: Wed, 04 Jan 2006 10:23:18 (y->n)
ok 5 - Date: Thu, 3 Mar 2005 14:12:10 (n->y)
ok 6 - Date: Thu, 3 Mar 2005 14:12:10 (y->n)
ok 7 - Date: Wed, 9 Mar 2005 09:16:19 (n->y)
ok 8 - Date: Wed, 9 Mar 2005 09:16:19 (y->n)
ok 9 - Date: Fri, 18 Mar 2005 15:08:57 (n->y)
ok 10 - Date: Fri, 18 Mar 2005 15:08:57 (y->n)
ok 11 - Date: Sun, 20 Mar 2005 16:32:50
ok 12 - Date: Sat, 26 Mar 2005 22:55:55 (n->y)
ok 13 - Date: Sat, 26 Mar 2005 22:55:55 (y->n)
ok 14 # skip Date: Sun, 8 May 2005 15:42:04
ok 15 - Date: Thu, 12 May 2005 14:57:20
ok 16 - Date: Thu, 09 Jun 2005 18:49:01 (n->y)
ok 17 - Date: Thu, 09 Jun 2005 18:49:01 (y->n)
ok 18 # skip Date: Mon, 22 Aug 2005 16:52:47
ok 19 # skip Date: Wed, 12 Oct 2005 17:16:48
ok 20 - Date: Mon, 07 Nov 2005 15:49:07 (n->y)
ok 21 - Date: Mon, 07 Nov 2005 15:49:07 (y->n)
ok 22 - Date: Thu, 24 Nov 2005 10:49:06 (n->y)
ok 23 - Date: Thu, 24 Nov 2005 10:49:06 (y->n)
ok 24 - Date: Sat, 3 Dec 2005 14:26:23 (n->y)
ok 25 - Date: Sat, 3 Dec 2005 14:26:23 (y->n)
ok
t/bugs-rt.t .............. 
1..41
ok 1 # skip Ticket #105-A YAML doesn't serialize odd objects very well
ok 2 - Ticket \#105-B YAML doesn't serialize odd objects very well (n->y)
ok 3 - Ticket \#105-C YAML doesn't serialize odd objects very well (n->y)
ok 4 - Ticket \#105-C YAML doesn't serialize odd objects very well (y->n)
ok 5 - Ticket \#105-D YAML doesn't serialize odd objects very well (n->y)
ok 6 - Ticket \#105-D YAML doesn't serialize odd objects very well (y->n)
ok 7 - Ticket \#105-E YAML doesn't serialize odd objects very well (n->y)
ok 8 - Ticket \#105-E YAML doesn't serialize odd objects very well (y->n)
ok 9 # skip Ticket #2957 Serializing array-elements with dashes
ok 10 # skip Ticket #3015 wish: folding length option for YAML
ok 11 - Ticket \#4066 Number vs. string heuristics for dump (n->y)
ok 12 - Ticket \#4066 Number vs. string heuristics for dump (y->n)
ok 13 # skip Ticket #4784 Can't create YAML::Old::Node from 'REF'
ok 14 - Ticket \#4866 Text with embedded newlines (n->y)
ok 15 - Ticket \#4866 Text with embedded newlines (y->n)
ok 16 - Ticket \#5299 Load(Dump({"hi, world" => 1})) fails (n->y)
ok 17 - Ticket \#5299 Load(Dump({"hi, world" => 1})) fails (y->n)
ok 18 - Ticket \#5691 Minor doc error in YAML.pod (n->y)
ok 19 - Ticket \#5691 Minor doc error in YAML.pod (y->n)
ok 20 - Ticket \#6095 Hash keys are not always escaped (n->y)
ok 21 - Ticket \#6095 Hash keys are not always escaped (y->n)
ok 22 - Ticket \#6139 0.35 can't deserialize blessed scalars (n->y)
ok 23 - Ticket \#6139 0.35 can't deserialize blessed scalars (y->n)
ok 24 # skip Ticket #7146 scalar with many spaces doesn't round trip
ok 25 # skip Ticket #8795 !!perl/code blocks are evaluated in package main
ok 26 - Ticket \#8818 YAML::Load fails if the last value in the stream ends with '|' (n->y)
ok 27 - Ticket \#8818 YAML::Load fails if the last value in the stream ends with '|' (y->n)
ok 28 - Ticket \#12729 < and > need to be quoted ? (n->y)
ok 29 - Ticket \#12729 < and > need to be quoted ? (y->n)
ok 30 # skip Ticket #12770 YAML crashes when tab used for indenting
ok 31 # skip Ticket #12955 DumpCode claims to support a code ref to serialize code, but doesn't
ok 32 - Ticket \#12959-a bug - nested inline collections with extra blanks
ok 33 - Ticket \#12959-b bug - nested inline collections with extra blanks
ok 34 - Ticket \#12959-c bug - nested inline collections with extra blanks
ok 35 - Ticket \#12959-d bug - nested inline collections with extra blanks
ok 36 # skip Ticket #13016 Plain Multiline Support
ok 37 - \#13500 Load(Dump("|foo")) fails (n->y)
ok 38 - \#13500 Load(Dump("|foo")) fails (y->n)
ok 39 # skip Ticket #13510 Another roundtrip fails
ok 40 - Ticket \#14938 Load(Dump(">=")) fails (n->y)
ok 41 - Ticket \#14938 Load(Dump(">=")) fails (y->n)
ok
t/changes.t .............. 
1..1
ok 1 # skip Can't parse Changes file yet :(
ok
t/dump-basics.t .......... 
1..7
ok 1 - A map
ok 2 - A list
ok 3 - A List of maps
ok 4 - A map of lists
ok 5 - Top level scalar
ok 6 - Top level literal scalar
ok 7 - Single Dash
ok
t/dump-blessed.t ......... 
1..2
ok 1 - Object class handles marshalling (n->y)
ok 2 - Object class handles marshalling (y->n)
ok
t/dump-code.t ............ 
1..7
ok 1 - a code ref (n->y)
ok 2 - a code ref (y->n)
ok 3 - an array of the same code ref (n->y)
ok 4 - an array of the same code ref (y->n)
ok 5 - dummy code ref (n->y)
ok 6 - dummy code ref (y->n)
ok 7 - blessed code ref (n->y)
ok
t/dump-file-utf8.t ....... 
1..6
ok 1 - DumpFile exported
ok 2 - LoadFile exported
ok 3 - Test source is correctly encoded
ok 4 - Output file exists
ok 5 - DumpFile YAML encoding is correct
ok 6 - LoadFile is ok
ok
t/dump-file.t ............ 
1..3
ok 1 - Dumpfile exported
ok 2 - Output file exists
ok 3 - DumpFile YAML is correct
ok
t/dump-nested.t .......... 
1..20
ok 1 -  (n->y)
ok 2 -  (y->n)
ok 3 -  (n->y)
ok 4 -  (y->n)
ok 5 -  (n->y)
ok 6 -  (y->n)
ok 7 -  (n->y)
ok 8 -  (y->n)
ok 9 -  (n->y)
ok 10 -  (y->n)
ok 11 -  (n->y)
ok 12 -  (y->n)
ok 13 -  (n->y)
ok 14 -  (y->n)
ok 15 -  (n->y)
ok 16 -  (y->n)
ok 17 -  (n->y)
ok 18 -  (y->n)
ok 19 -  (n->y)
ok 20 -  (y->n)
ok
t/dump-opts.t ............ 
1..19
ok 1 -  (n->y)
ok 2 -  (y->n)
ok 3 -  (n->y)
ok 4 -  (n->y)
ok 5 -  (y->n)
ok 6 -  (n->y)
ok 7 -  (y->n)
ok 8 -  (n->y)
ok 9 -  (y->n)
ok 10 -  (n->y)
ok 11 -  (y->n)
ok 12 -  (n->y)
ok 13 -  (y->n)
ok 14 -  (n->y)
ok 15 -  (y->n)
ok 16 -  (n->y)
ok 17 -  (y->n)
ok 18 -  (n->y)
ok 19 -  (y->n)
ok
t/dump-perl-types-512.t .. skipped: test only for perls before v5.13.5-11-gfb85c04
t/dump-perl-types-514.t .. 
1..2
ok 1 - Regular Expression
ok 2 - Regular Expression with newline
ok
t/dump-perl-types.t ...... 
1..14
ok 1 - Scalar
ok 2 - Hash
ok 3 - Array
ok 4 - Code
ok 5 - Scalar Reference
ok 6 - Scalar Glob
ok 7 - Array Glob
ok 8 - Code Glob
ok 9 - Blessed Empty Hash
ok 10 - Blessed Populated Hash
ok 11 - Blessed Empty Array
ok 12 - Blessed Populated Array
ok 13 - Blessed Empty String
ok 14 - Blessed Populated String
ok
t/dump-stringify.t ....... 
1..6
ok 1 - Global stringification default dump
ok 2 - Global stringification enabled dump
ok 3 - Global stringification disabled dump
ok 4 - Local stringification default dump
ok 5 - Local stringification enabled dump
ok 6 - Local stringification disabled dump
ok
t/dump-synopsis.t ........ 
1..1
ok 1 - Basic YAML::Old::Dumper usage worked as expected
ok
t/dump-tests-512.t ....... skipped: test only for perls before v5.13.5-11-gfb85c04
t/dump-tests-514.t ....... 
1..1
ok 1 -  (n->y)
ok
t/dump-tests.t ........... 
1..57
ok 1 -  (n->y)
ok 2 -  (y->n)
ok 3 -  (n->y)
ok 4 -  (y->n)
ok 5 -  (n->y)
ok 6 -  (y->n)
ok 7 -  (n->y)
ok 8 -  (y->n)
ok 9 -  (n->y)
ok 10 -  (y->n)
ok 11 -  (n->y)
ok 12 -  (y->n)
ok 13 -  (n->y)
ok 14 -  (y->n)
ok 15 -  (n->y)
ok 16 -  (y->n)
ok 17 -  (n->y)
ok 18 -  (y->n)
ok 19 -  (n->y)
ok 20 -  (y->n)
ok 21 -  (n->y)
ok 22 -  (y->n)
ok 23 -  (n->y)
ok 24 -  (y->n)
ok 25 -  (n->y)
ok 26 - Strings with nulls (n->y)
ok 27 - Strings with nulls (y->n)
ok 28 -  (n->y)
ok 29 -  (n->y)
ok 30 -  (y->n)
ok 31 -  (n->y)
ok 32 -  (y->n)
ok 33 -  (n->y)
ok 34 -  (y->n)
ok 35 -  (n->y)
ok 36 -  (n->y)
ok 37 -  (n->y)
ok 38 -  (n->y)
ok 39 -  (n->y)
ok 40 -  (y->n)
ok 41 -  (n->y)
ok 42 -  (y->n)
ok 43 -  (n->y)
ok 44 -  (y->n)
ok 45 -  (n->y)
ok 46 -  (y->n)
ok 47 -  (n->y)
ok 48 -  (y->n)
ok 49 -  (n->y)
ok 50 -  (y->n)
ok 51 -  (n->y)
ok 52 -  (y->n)
ok 53 -  (n->y)
ok 54 -  (n->y)
ok 55 -  (n->y)
ok 56 -  (n->y)
ok 57 -  (y->n)
ok
t/dump-works.t ........... 
ok 1 - A one key hash
1..1
ok
t/errors.t ............... 
1..35
ok 1 - YAML_PARSE_ERR_BAD_CHARS
ok 2 - YAML_PARSE_ERR_NO_FINAL_NEWLINE
ok 3 - YAML_PARSE_ERR_BAD_MAJOR_VERSION
ok 4 - YAML_PARSE_WARN_BAD_MINOR_VERSION
ok 5 - YAML_PARSE_WARN_MULTIPLE_DIRECTIVES
ok 6 - YAML_PARSE_ERR_TEXT_AFTER_INDICATOR
ok 7 - YAML_PARSE_ERR_NO_ANCHOR
ok 8 - YAML_PARSE_ERR_INCONSISTENT_INDENTATION
ok 9 - YAML_PARSE_ERR_SINGLE_LINE
ok 10 - YAML_PARSE_ERR_BAD_ANCHOR
ok 11 - YAML_PARSE_ERR_MANY_EXPLICIT
ok 12 - YAML_PARSE_ERR_MANY_IMPLICIT
ok 13 - YAML_PARSE_ERR_MANY_ANCHOR
ok 14 - YAML_PARSE_ERR_ANCHOR_ALIAS
ok 15 - YAML_PARSE_ERR_BAD_ALIAS
ok 16 - YAML_PARSE_ERR_MANY_ALIAS
ok 17 - YAML_LOAD_ERR_NO_DEFAULT_VALUE
ok 18 - YAML_LOAD_ERR_BAD_MAP_ELEMENT
ok 19 - YAML_LOAD_WARN_DUPLICATE_KEY
ok 20 - YAML_LOAD_ERR_BAD_SEQ_ELEMENT
ok 21 - YAML_PARSE_ERR_INLINE_MAP
ok 22 - YAML_PARSE_ERR_INLINE_SEQUENCE
ok 23 - YAML_PARSE_ERR_BAD_DOUBLE
ok 24 - YAML_PARSE_ERR_BAD_SINGLE
ok 25 - YAML_PARSE_ERR_BAD_INLINE_IMPLICIT
ok 26 - YAML_PARSE_ERR_BAD_IMPLICIT
ok 27 - YAML_PARSE_ERR_INCONSISTENT_INDENTATION
ok 28 - YAML_LOAD_WARN_GLOB_NAME
ok 29 - YAML_LOAD_WARN_BAD_GLOB_ELEM
ok 30 - YAML_PARSE_ERR_ZERO_INDENT
ok 31 - YAML_LOAD_ERR_FILE_INPUT
ok 32 - YAML_DUMP_ERR_FILE_OUTPUT
ok 33 - YAML_DUMP_ERR_NO_HEADER
ok 34 - YAML_DUMP_ERR_NO_HEADER
ok 35 - YAML_DUMP_ERR_NO_HEADER
ok
t/export.t ............... 
1..3
ok 1 - Dump() is exported
ok 2 - Load() is exported
ok 3 - Store() is not exported
ok
t/freeze-thaw.t .......... 
1..9
ok 1 - Dump exported
ok 2 - Load exported
ok 3 - freeze exported
ok 4 - thaw exported
ok 5 - freeze works
ok 6 - freeze produces same thing as Dump
ok 7 - thaw produces same thing as Load
ok 8 - freeze/thaw makes a clone
ok 9 - Melted object really is a hash
ok
t/global-api.t ........... 
1..4
ok 1 - Dump got to the business end
ok 2 - Load got to the business end
ok 3 - YAML::Old::Dump got to the business end
ok 4 - YAML::Old::Load got to the business end
ok
t/inbox.t ................ 
1..3
ok 1 # skip fix this next release
ok 2 # skip fix this next release
ok 3 # skip fix this next release
ok
t/load-fails.t ........... 
1..4
ok 1
ok 2
ok 3
ok 4
ok
t/load-passes.t .......... 
1..8
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok
t/load-slides.t .......... 
1..28
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok
t/load-spec.t ............ 
1..52
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok 27
ok 28
ok 29
ok 30
ok 31
ok 32
ok 33
ok 34
ok 35
ok 36
ok 37
ok 38
ok 39
ok 40
ok 41
ok 42
ok 43
ok 44
ok 45
ok 46
ok 47
ok 48
ok 49
ok 50
ok 51
ok 52
ok
t/load-tests.t ........... 
1..28
ok 1 - a yaml error log
ok 2 - comments and some top level documents
ok 3 - an array of assorted junk
ok 4 - a bunch of small top level thingies
ok 5 - a headerless sequence and a map
ok 6 - comments in various places
ok 7 - several docs, some empty
ok 8 - a perl reference to a scalar
ok 9 - date loading
ok 10 - sequence with trailing comment
ok 11 - a simple literal block
ok 12 - an unchomped literal
ok 13 - a chomped literal
ok 14 - assorted numerics
ok 15 - an empty string top level doc
ok 16 - an array of various undef
ok 17 - !!perl/array
ok 18 - !!perl/array:
ok 19 - !!perl/array:moose
ok 20 - foo
ok 21 - foo
ok 22 - foo
ok 23 - foo
ok 24 - foo
ok 25 - foo
ok 26 - foo
ok 27 - foo
ok 28 - foo
ok
t/load-works.t ........... 
ok 1 - A one key hash
1..1
ok
t/marshall.t ............. 
1..10
ok 1 - Serialize a hash object as a sequence (n->y)
ok 2 - Serialize a hash object as a sequence (y->n)
ok 3 - Use a non-standard tag (n->y)
ok 4 - Use a non-standard tag (y->n)
ok 5 - super calls to mixins work (n->y)
ok 6 - super calls to mixins work (y->n)
ok 7 - yaml_dump doesn't mutate original hash (n->y)
ok 8 - first key exists
ok 9 - second key exists
ok 10 - extra key not added
ok
t/node-info.t ............ 
1..16
ok 1 - Hash Ref
ok 2 - Array Ref
ok 3 - Scalar
ok 4 - Scalar Ref
ok 5 - Scalar Ref Ref
ok 6 - Code Ref
ok 7 - Code Ref Ref
ok 8 - Glob
ok 9 - Regular Expression
ok 10 - Blessed Hash Ref
ok 11 - Blessed Array Ref
ok 12 - Blessed Scalar Ref
ok 13 - Blessed Code Ref
ok 14 - Blessed Glob
ok 15 - Not Stringified Hash Object
ok 16 - Stringified Hash Object
ok
t/pugs-objects.t ......... 
1..2
ok 1 - Turn Perl object to Pugs object (n->y)
ok 2 - Turn Perl object to Pugs object (y->n)
ok
t/references.t ........... 
1..10
ok 1 - A scalar ref (n->y)
ok 2 - A scalar ref (y->n)
ok 3 - A ref to a scalar ref (n->y)
ok 4 - A ref to a scalar ref (y->n)
ok 5 - A ref to a ref to a scalar ref (n->y)
ok 6 - A ref to a ref to a scalar ref (y->n)
ok 7 - A blessed container reference (n->y)
ok 8 - A blessed container reference (y->n)
ok 9 - A blessed scalar reference (n->y)
ok 10 - A blessed scalar reference (y->n)
ok
t/regexp.t ............... 
1..11
ok 1 - Regexps load
ok 2 - Regexps dump
ok 3 - The regexp is a Regexp
ok 4 - The regexp works
ok 5 - Regexps load
ok 6 - The regexp is a Classy :(
ok 7 - The regexp works
ok 8 - Regexps load
ok 9 - Regexps dump
ok 10 - The regexp is a Regexp
ok 11 - The regexp works
ok
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing

Timeout (max run time is 300s)
C:\Perl-5.22-32\bin\perl.exe exits with 37.