Start 2010-04-19T19:55:50 ActivePerl-1200 CPAN-1.9402 LIB=C:\PROGRA~1\MICROS~3\VC98\Lib\PSDK;C:\PROGRA~1\MICROS~2\Lib;C:\PROGRA~1\MICROS~3\VC98\Lib;C:\PROGRA~1\MICROS~3\VC98\MFC\Lib INCLUDE=C:\PROGRA~1\MICROS~2\Include;C:\PROGRA~1\MICROS~3\VC98\ATL\Include;C:\PROGRA~1\MICROS~3\VC98\Include;C:\PROGRA~1\MICROS~3\VC98\MFC\Include PATH=C:/CPANFL~1.12/var/libs/bin;C:\PROGRA~1\MICROS~2\Bin;C:\PROGRA~1\MICROS~2\Bin\WinNT;C:\PROGRA~1\MICROS~3\VC98\Bin;C:\PROGRA~1\MICROS~3\Common\MSDev98\Bin;C:\Perl-5.12\site\bin;C:\Perl-5.12\bin;C:\cygwin\bin;C:\PROGRA~1\Perforce;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0 Going to read 'C:\cpanfly-5.12\var\cpan\Metadata' Database was generated on Sun, 18 Apr 2010 06:26:59 GMT Running make for G/GB/GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/G/GB/GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz Checksum for C:\cpanfly-5.12\var\cpan\sources\authors\id\G\GB\GBARR\Perlbal-Plugin-TrustHeader-0.02.tar.gz ok Perlbal-Plugin-TrustHeader-0.02/ Perlbal-Plugin-TrustHeader-0.02/Changes Perlbal-Plugin-TrustHeader-0.02/lib/ Perlbal-Plugin-TrustHeader-0.02/Makefile.PL Perlbal-Plugin-TrustHeader-0.02/MANIFEST Perlbal-Plugin-TrustHeader-0.02/MANIFEST.SKIP Perlbal-Plugin-TrustHeader-0.02/META.yml Perlbal-Plugin-TrustHeader-0.02/README Perlbal-Plugin-TrustHeader-0.02/SIGNATURE Perlbal-Plugin-TrustHeader-0.02/t/ Perlbal-Plugin-TrustHeader-0.02/t/00-load.t Perlbal-Plugin-TrustHeader-0.02/lib/Perlbal/ Perlbal-Plugin-TrustHeader-0.02/lib/Perlbal/Plugin/ Perlbal-Plugin-TrustHeader-0.02/lib/Perlbal/Plugin/TrustHeader.pm CPAN.pm: Going to build G/GB/GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz >>> C:\Perl-5.12\bin\perl.exe Makefile.PL Warning: prerequisite Perlbal 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Perlbal::Plugin::TrustHeader ---- Unsatisfied dependencies detected during ---- ---- GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz ---- Perlbal [requires] Running make test Delayed until after prerequisites Running test for module 'Perlbal' Running make for D/DO/DORMANDO/Perlbal-1.75.tar.gz Checksum for C:\cpanfly-5.12\var\cpan\sources\authors\id\D\DO\DORMANDO\Perlbal-1.75.tar.gz ok Perlbal-1.75/ Perlbal-1.75/Makefile.PL Perlbal-1.75/MANIFEST Perlbal-1.75/t/ Perlbal-1.75/t/76-plugin-redirect.t Perlbal-1.75/t/31-realworld.t Perlbal-1.75/t/60-child-httpd.t Perlbal-1.75/t/75-plugin-include.t Perlbal-1.75/t/90-accesscontrol.t Perlbal-1.75/t/helper/ Perlbal-1.75/t/helper/child-httpd.pl Perlbal-1.75/t/32-selector.t Perlbal-1.75/t/17-webserver-concat.t Perlbal-1.75/t/40-ranges.t Perlbal-1.75/t/52-chunked-upload.t Perlbal-1.75/t/45-buffereduploads.t Perlbal-1.75/t/12-headers.t Perlbal-1.75/t/15-webserver.t Perlbal-1.75/t/35-reproxy.t Perlbal-1.75/t/50-plugins.t Perlbal-1.75/t/30-reverseproxy.t Perlbal-1.75/t/00-use.t Perlbal-1.75/t/22-chunked-put.t Perlbal-1.75/t/20-put.t Perlbal-1.75/t/10-testharness.t Perlbal-1.75/t/32-pipelining.t Perlbal-1.75/CONTRIBUTING Perlbal-1.75/conf/ Perlbal-1.75/conf/ssl.conf Perlbal-1.75/conf/echoservice.conf Perlbal-1.75/conf/load-balancer.conf Perlbal-1.75/conf/nodelist.dat Perlbal-1.75/conf/webserver.conf Perlbal-1.75/conf/not-modified-plugin.conf Perlbal-1.75/conf/virtual-hosts.conf Perlbal-1.75/doc/ Perlbal-1.75/doc/service-parameters.txt Perlbal-1.75/doc/reproxying.txt Perlbal-1.75/doc/http-versions.txt Perlbal-1.75/doc/hacking/ Perlbal-1.75/doc/hacking/todo.txt Perlbal-1.75/doc/hacking/hooks.txt Perlbal-1.75/doc/hacking/classes.txt Perlbal-1.75/doc/config-guide.txt Perlbal-1.75/doc/pool-parameters.txt Perlbal-1.75/lib/ Perlbal-1.75/lib/Perlbal.pm Perlbal-1.75/lib/Perlbal/ Perlbal-1.75/lib/Perlbal/ClientProxy.pm Perlbal-1.75/lib/Perlbal/HTTPHeaders.pm Perlbal-1.75/lib/Perlbal/ClientHTTP.pm Perlbal-1.75/lib/Perlbal/ClientHTTPBase.pm Perlbal-1.75/lib/Perlbal/AIO.pm Perlbal-1.75/lib/Perlbal/ReproxyManager.pm Perlbal-1.75/lib/Perlbal/Cache.pm Perlbal-1.75/lib/Perlbal/ManageCommand.pm Perlbal-1.75/lib/Perlbal/Socket.pm Perlbal-1.75/lib/Perlbal/Test.pm Perlbal-1.75/lib/Perlbal/SocketSSL.pm Perlbal-1.75/lib/Perlbal/Pool.pm Perlbal-1.75/lib/Perlbal/TCPListener.pm Perlbal-1.75/lib/Perlbal/Service.pm Perlbal-1.75/lib/Perlbal/BackendHTTP.pm Perlbal-1.75/lib/Perlbal/Test/ Perlbal-1.75/lib/Perlbal/Test/WebServer.pm Perlbal-1.75/lib/Perlbal/Test/WebClient.pm Perlbal-1.75/lib/Perlbal/Plugin/ Perlbal-1.75/lib/Perlbal/Plugin/Highpri.pm Perlbal-1.75/lib/Perlbal/Plugin/Stats.pm Perlbal-1.75/lib/Perlbal/Plugin/MaxContentLength.pm Perlbal-1.75/lib/Perlbal/Plugin/LazyCDN.pm Perlbal-1.75/lib/Perlbal/Plugin/EchoService.pm Perlbal-1.75/lib/Perlbal/Plugin/NotModified.pm Perlbal-1.75/lib/Perlbal/Plugin/AccessControl.pm Perlbal-1.75/lib/Perlbal/Plugin/Palimg.pm Perlbal-1.75/lib/Perlbal/Plugin/Vpaths.pm Perlbal-1.75/lib/Perlbal/Plugin/Cgilike.pm Perlbal-1.75/lib/Perlbal/Plugin/AutoRemoveLeadingDir.pm Perlbal-1.75/lib/Perlbal/Plugin/Queues.pm Perlbal-1.75/lib/Perlbal/Plugin/Redirect.pm Perlbal-1.75/lib/Perlbal/Plugin/Vhosts.pm Perlbal-1.75/lib/Perlbal/Plugin/Include.pm Perlbal-1.75/lib/Perlbal/Util.pm Perlbal-1.75/lib/Perlbal/UploadListener.pm Perlbal-1.75/lib/Perlbal/ChunkedUploadState.pm Perlbal-1.75/lib/Perlbal/CommandContext.pm Perlbal-1.75/lib/Perlbal/ClientManage.pm Perlbal-1.75/CHANGES Perlbal-1.75/META.yml Perlbal-1.75/perlbal Perlbal-1.75/devtools/ Perlbal-1.75/devtools/gendocs.pl CPAN.pm: Going to build D/DO/DORMANDO/Perlbal-1.75.tar.gz >>> C:\Perl-5.12\bin\perl.exe Makefile.PL Warning: prerequisite BSD::Resource 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Perlbal ---- Unsatisfied dependencies detected during ---- ---- DORMANDO/Perlbal-1.75.tar.gz ---- BSD::Resource [requires] Running make test Delayed until after prerequisites Running test for module 'BSD::Resource' Running make for J/JH/JHI/BSD-Resource-1.2904.tar.gz Checksum for C:\cpanfly-5.12\var\cpan\sources\authors\id\J\JH\JHI\BSD-Resource-1.2904.tar.gz ok BSD-Resource-1.2904/ BSD-Resource-1.2904/ChangeLog BSD-Resource-1.2904/INSTALL BSD-Resource-1.2904/Makefile.PL BSD-Resource-1.2904/MANIFEST BSD-Resource-1.2904/META.yml BSD-Resource-1.2904/ppport.h BSD-Resource-1.2904/README BSD-Resource-1.2904/Resource.pm BSD-Resource-1.2904/Resource.xs BSD-Resource-1.2904/t/ BSD-Resource-1.2904/t/getpriority.t BSD-Resource-1.2904/t/getrlimit.t BSD-Resource-1.2904/t/getrusage.t BSD-Resource-1.2904/t/pod-coverage.t BSD-Resource-1.2904/t/pod.t BSD-Resource-1.2904/t/setpriority.t BSD-Resource-1.2904/t/setrlimit.t BSD-Resource-1.2904/t/times.t CPAN.pm: Going to build J/JH/JHI/BSD-Resource-1.2904.tar.gz >>> C:\Perl-5.12\bin\perl.exe Makefile.PL Configuring BSD::Resource... Checking whether you have certain header files... The system cannot find the path specified. The system cannot find the path specified. Your operating system does not seem to have or . (Run "perl Makefile.PL" with the environment variable VERBOSE set to 1 (one) too see in more detail what went wrong.) There is no way BSD::Resource is going to work. I am awfully sorry but I cannot go further. Aborting configuration of BSD::Resource. Warning: No success on command[C:\Perl-5.12\bin\perl.exe Makefile.PL] JHI/BSD-Resource-1.2904.tar.gz C:\Perl-5.12\bin\perl.exe Makefile.PL -- NOT OK Running make test Make had some problems, won't test Running make for D/DO/DORMANDO/Perlbal-1.75.tar.gz Has already been unwrapped into directory C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e CPAN.pm: Going to build D/DO/DORMANDO/Perlbal-1.75.tar.gz Warning: Prerequisite 'BSD::Resource => 0' for 'DORMANDO/Perlbal-1.75.tar.gz' failed when processing 'JHI/BSD-Resource-1.2904.tar.gz' with 'writemakefile => NO 'C:\Perl-5.12\bin\perl.exe Makefile.PL' returned status 512'. Continuing, but chances to succeed are limited. >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp lib/Perlbal/Test.pm blib\lib\Perlbal\Test.pm cp lib/Perlbal/CommandContext.pm blib\lib\Perlbal\CommandContext.pm cp lib/Perlbal/Plugin/LazyCDN.pm blib\lib\Perlbal\Plugin\LazyCDN.pm cp lib/Perlbal/ClientHTTP.pm blib\lib\Perlbal\ClientHTTP.pm cp lib/Perlbal/Plugin/Highpri.pm blib\lib\Perlbal\Plugin\Highpri.pm cp lib/Perlbal/ClientProxy.pm blib\lib\Perlbal\ClientProxy.pm cp lib/Perlbal/Service.pm blib\lib\Perlbal\Service.pm cp lib/Perlbal/Plugin/AutoRemoveLeadingDir.pm blib\lib\Perlbal\Plugin\AutoRemoveLeadingDir.pm cp lib/Perlbal/AIO.pm blib\lib\Perlbal\AIO.pm cp lib/Perlbal/BackendHTTP.pm blib\lib\Perlbal\BackendHTTP.pm cp lib/Perlbal/Plugin/AccessControl.pm blib\lib\Perlbal\Plugin\AccessControl.pm cp lib/Perlbal/Test/WebClient.pm blib\lib\Perlbal\Test\WebClient.pm cp lib/Perlbal/Plugin/NotModified.pm blib\lib\Perlbal\Plugin\NotModified.pm cp lib/Perlbal/Plugin/Vhosts.pm blib\lib\Perlbal\Plugin\Vhosts.pm cp lib/Perlbal/Plugin/Include.pm blib\lib\Perlbal\Plugin\Include.pm cp lib/Perlbal/UploadListener.pm blib\lib\Perlbal\UploadListener.pm cp lib/Perlbal/Util.pm blib\lib\Perlbal\Util.pm cp lib/Perlbal/TCPListener.pm blib\lib\Perlbal\TCPListener.pm cp lib/Perlbal/Test/WebServer.pm blib\lib\Perlbal\Test\WebServer.pm cp lib/Perlbal/Plugin/Redirect.pm blib\lib\Perlbal\Plugin\Redirect.pm cp lib/Perlbal/SocketSSL.pm blib\lib\Perlbal\SocketSSL.pm cp lib/Perlbal/HTTPHeaders.pm blib\lib\Perlbal\HTTPHeaders.pm cp lib/Perlbal/Plugin/Cgilike.pm blib\lib\Perlbal\Plugin\Cgilike.pm cp lib/Perlbal/Cache.pm blib\lib\Perlbal\Cache.pm cp lib/Perlbal/Plugin/Queues.pm blib\lib\Perlbal\Plugin\Queues.pm cp lib/Perlbal.pm blib\lib\Perlbal.pm cp lib/Perlbal/Socket.pm blib\lib\Perlbal\Socket.pm cp lib/Perlbal/Plugin/MaxContentLength.pm blib\lib\Perlbal\Plugin\MaxContentLength.pm cp lib/Perlbal/Pool.pm blib\lib\Perlbal\Pool.pm cp lib/Perlbal/Plugin/Stats.pm blib\lib\Perlbal\Plugin\Stats.pm cp lib/Perlbal/ManageCommand.pm blib\lib\Perlbal\ManageCommand.pm cp lib/Perlbal/Plugin/Palimg.pm blib\lib\Perlbal\Plugin\Palimg.pm cp lib/Perlbal/ClientManage.pm blib\lib\Perlbal\ClientManage.pm cp lib/Perlbal/ReproxyManager.pm blib\lib\Perlbal\ReproxyManager.pm cp lib/Perlbal/Plugin/EchoService.pm blib\lib\Perlbal\Plugin\EchoService.pm cp lib/Perlbal/ClientHTTPBase.pm blib\lib\Perlbal\ClientHTTPBase.pm cp lib/Perlbal/ChunkedUploadState.pm blib\lib\Perlbal\ChunkedUploadState.pm cp lib/Perlbal/Plugin/Vpaths.pm blib\lib\Perlbal\Plugin\Vpaths.pm C:\Perl-5.12\bin\perl.exe -MExtUtils::Command -e "cp" -- perlbal blib\script\perlbal pl2bat.bat blib\script\perlbal DORMANDO/Perlbal-1.75.tar.gz nmake -- OK Running make test >>> nmake test TEST_VERBOSE=1 Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. C:\Perl-5.12\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. t/00-use.t ............... 1..1 ok 1 ok No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2748, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/10-testharness.t ....... beginning run Dubious, test returned 25 (wstat 6400, 0x1900) No subtests run No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. t/12-headers.t ........... ok 1 - basic request - Perlbal::HTTPHeaders ok 2 - basic response - Perlbal::HTTPHeaders ok 3 - headers without content 1 - Perlbal::HTTPHeaders ok 4 - headers without content 2 - Perlbal::HTTPHeaders ok 5 - headers without content 3 - Perlbal::HTTPHeaders ok 6 - headers without content 4 - Perlbal::HTTPHeaders ok 7 - headers_list 1..7 ok No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2164, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/15-webserver.t ......... 1..17 beginning run Dubious, test returned 25 (wstat 6400, 0x1900) Failed 17/17 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2480, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/17-webserver-concat.t .. 1..20 beginning run Dubious, test returned 25 (wstat 6400, 0x1900) Failed 20/20 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -220, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/20-put.t ............... beginning run Dubious, test returned 25 (wstat 6400, 0x1900) No subtests run No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -616, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/22-chunked-put.t ....... beginning run Dubious, test returned 25 (wstat 6400, 0x1900) No subtests run No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2560, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like you planned 28 tests but ran 1. # Looks like your test exited with 29 just after 1. t/30-reverseproxy.t ...... 1..28 ok 1 - web servers started beginning run Dubious, test returned 29 (wstat 7424, 0x1d00) Failed 27/28 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -3816, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like you planned 157 tests but ran 1. # Looks like your test exited with 29 just after 1. t/31-realworld.t ......... 1..157 ok 1 - web servers started beginning run Dubious, test returned 29 (wstat 7424, 0x1d00) Failed 156/157 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2916, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like you planned 12 tests but ran 1. # Looks like your test exited with 29 just after 1. t/32-pipelining.t ........ 1..12 ok 1 - web servers started beginning run Dubious, test returned 29 (wstat 7424, 0x1d00) Failed 11/12 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -3776, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like you planned 38 tests but ran 1. # Looks like your test exited with 29 just after 1. t/32-selector.t .......... 1..38 ok 1 - web servers started beginning run Dubious, test returned 29 (wstat 7424, 0x1d00) Failed 37/38 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -1364, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 29 just after 1. t/35-reproxy.t ........... ok 1 - web servers started beginning run 1..1 Dubious, test returned 29 (wstat 7424, 0x1d00) All 1 subtests passed No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -4060, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 29 before it could output anything. t/40-ranges.t ............ 1..35 beginning run Dubious, test returned 29 (wstat 7424, 0x1d00) Failed 35/35 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -436, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 29 just after 1. t/45-buffereduploads.t ... ok 1 - webserver started beginning run 1..1 Dubious, test returned 29 (wstat 7424, 0x1d00) All 1 subtests passed No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. t/50-plugins.t ........... 1..6 ok 1 - require Perlbal::Plugin::Highpri; ok 2 - require Perlbal::Plugin::Palimg; ok 3 - require Perlbal::Plugin::Queues; ok 4 - require Perlbal::Plugin::Stats; ok 5 - require Perlbal::Plugin::Vhosts; ok 6 - require Perlbal::Plugin::MaxContentLength; ok No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138, line 1. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -1800, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 29 just after 1. t/52-chunked-upload.t .... ok 1 - webserver started beginning run 1..1 Dubious, test returned 29 (wstat 7424, 0x1d00) All 1 subtests passed t/60-child-httpd.t ....... skipped: Alpha feature; test skipped without $ENV{PERLBAL_TEST_ALPHA} No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2140, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/75-plugin-include.t .... 1..8 beginning run Dubious, test returned 25 (wstat 6400, 0x1900) Failed 8/8 subtests No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -3796, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/76-plugin-redirect.t ... beginning run Dubious, test returned 25 (wstat 6400, 0x1900) No subtests run No such signal: SIGUSR1 at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal.pm line 138. Use of uninitialized value $spid in numeric eq (==) at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Use of uninitialized value $spid in concatenation (.) or string at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. Our child was -2196, but we connected and it says it's . at C:\cpanfly-5.12\var\cpan\build\Perlbal-1.75-Kelw5e\blib\lib/Perlbal/Test.pm line 264, line 4. # Looks like your test exited with 25 before it could output anything. t/90-accesscontrol.t ..... OK beginning run Dubious, test returned 25 (wstat 6400, 0x1900) No subtests run Test Summary Report ------------------- t/10-testharness.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: No plan found in TAP output t/15-webserver.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 17 tests but ran 0. t/17-webserver-concat.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 20 tests but ran 0. t/20-put.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: No plan found in TAP output t/22-chunked-put.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: No plan found in TAP output t/30-reverseproxy.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 Parse errors: Bad plan. You planned 28 tests but ran 1. t/31-realworld.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 Parse errors: Bad plan. You planned 157 tests but ran 1. t/32-pipelining.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 Parse errors: Bad plan. You planned 12 tests but ran 1. t/32-selector.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 Parse errors: Bad plan. You planned 38 tests but ran 1. t/35-reproxy.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 t/40-ranges.t (Wstat: 7424 Tests: 0 Failed: 0) Non-zero exit status: 29 Parse errors: Bad plan. You planned 35 tests but ran 0. t/45-buffereduploads.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 t/52-chunked-upload.t (Wstat: 7424 Tests: 1 Failed: 0) Non-zero exit status: 29 t/75-plugin-include.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: Bad plan. You planned 8 tests but ran 0. t/76-plugin-redirect.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: No plan found in TAP output t/90-accesscontrol.t (Wstat: 6400 Tests: 0 Failed: 0) Non-zero exit status: 25 Parse errors: No plan found in TAP output Files=20, Tests=21, 17 wallclock secs ( 0.05 usr + 0.02 sys = 0.06 CPU) Result: FAIL Failed 16/20 test programs. 0/21 subtests failed. NMAKE : fatal error U1077: 'C:\Perl-5.12\bin\perl.exe' : return code '0x19' Stop. DORMANDO/Perlbal-1.75.tar.gz nmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports DORMANDO/Perlbal-1.75.tar.gz Running make for G/GB/GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz Has already been unwrapped into directory C:\cpanfly-5.12\var\cpan\build\Perlbal-Plugin-TrustHeader-0.02-22Kpu6 CPAN.pm: Going to build G/GB/GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz Warning: Prerequisite 'Perlbal => 0' for 'GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz' failed when processing 'DORMANDO/Perlbal-1.75.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp lib/Perlbal/Plugin/TrustHeader.pm blib\lib\Perlbal\Plugin\TrustHeader.pm GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz nmake -- OK Running make test >>> nmake test TEST_VERBOSE=1 Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. C:\Perl-5.12\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t Can't locate Perlbal/HTTPHeaders.pm in @INC (@INC contains: C:\cpanfly-5.12\var\cpan\build\Perlbal-Plugin-TrustHeader-0.02-22Kpu6\blib\lib C:\cpanfly-5.12\var\cpan\build\Perlbal-Plugin-TrustHeader-0.02-22Kpu6\blib\arch C:/cpanfly-5.12/var/megalib C:/Perl-5.12/site/lib C:/Perl-5.12/lib) at t/00-load.t line 4. BEGIN failed--compilation aborted at t/00-load.t line 4. t/00-load.t .. 1..1 Dubious, test returned 2 (wstat 512, 0x200) Failed 1/1 subtests Test Summary Report ------------------- t/00-load.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 1 tests but ran 0. Files=1, Tests=0, 0 wallclock secs ( 0.03 usr + 0.00 sys = 0.03 CPU) Result: FAIL Failed 1/1 test programs. 0/0 subtests failed. NMAKE : fatal error U1077: 'C:\Perl-5.12\bin\perl.exe' : return code '0x2' Stop. GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz nmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports GBARR/Perlbal-Plugin-TrustHeader-0.02.tar.gz Finished 2010-04-19T19:56:13