Start 2010-02-16T07:23:00
ActivePerl-825 CPAN-1.9402
LIB=C:\PROGRA~1\MICROS~4\VC98\Lib\PSDK;C:\PROGRA~1\MICROS~2\Lib;C:\PROGRA~1\MICROS~4\VC98\Lib;C:\PROGRA~1\MICROS~4\VC98\MFC\Lib
INCLUDE=C:\PROGRA~1\MICROS~2\Include;C:\PROGRA~1\MICROS~4\VC98\ATL\Include;C:\PROGRA~1\MICROS~4\VC98\Include;C:\PROGRA~1\MICROS~4\VC98\MFC\Include
PATH=C:/CPANFL~1.8/var/libs/bin;C:\PROGRA~1\MICROS~2\Bin;C:\PROGRA~1\MICROS~2\Bin\WinNT;C:\PROGRA~1\MICROS~4\VC98\Bin;C:\PROGRA~1\MICROS~4\Common\MSDev98\Bin;C:\Perl-5.8\site\bin;C:\Perl-5.8\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0;C:\PROGRA~1\Perforce
Going to read 'C:\cpanfly-5.8\var\cpan\Metadata'
  Database was generated on Mon, 15 Feb 2010 23:34:28 GMT
Running make for B/BI/BINGOS/CPANPLUS-YACSmoke-0.48.tar.gz
Fetching with LWP:
  http://cpan.nas.activestate.com/authors/id/B/BI/BINGOS/CPANPLUS-YACSmoke-0.48.tar.gz
Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\B\BI\BINGOS\CPANPLUS-YACSmoke-0.48.tar.gz ok
Will not use Archive::Tar, need 1.00
CPANPLUS-YACSmoke-0.48
CPANPLUS-YACSmoke-0.48/t
CPANPLUS-YACSmoke-0.48/t/04_mark.t
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E/EU
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E/EU/EUNOXS
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E/EU/EUNOXS/Fabble-Bar-0.01.tar.gz
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E/EU/EUNOXS/Fibble-Bar-0.01.tar.gz
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E/EU/EUNOXS/Foo-Bar-0.01.tar.gz
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/id/E/EU/EUNOXS/Fobble-Bar-0.01.tar.gz
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/authors/01mailrc.txt.gz
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/modules
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/modules/02packages.details.txt.gz
CPANPLUS-YACSmoke-0.48/t/dummy-CPAN/modules/03modlist.data.gz
CPANPLUS-YACSmoke-0.48/t/06_excluded.t
CPANPLUS-YACSmoke-0.48/t/inc
CPANPLUS-YACSmoke-0.48/t/inc/conf.pl
CPANPLUS-YACSmoke-0.48/t/inc/Capture
CPANPLUS-YACSmoke-0.48/t/inc/Capture/Tiny.pm
CPANPLUS-YACSmoke-0.48/t/07_pass_mm.t
CPANPLUS-YACSmoke-0.48/t/dummy-perl
CPANPLUS-YACSmoke-0.48/t/dummy-perl/.hidden
CPANPLUS-YACSmoke-0.48/t/00_use.t
CPANPLUS-YACSmoke-0.48/t/05_na_detail.t
CPANPLUS-YACSmoke-0.48/t/01_new.t
CPANPLUS-YACSmoke-0.48/t/99_pod.t
CPANPLUS-YACSmoke-0.48/t/99_pod_coverage.t
CPANPLUS-YACSmoke-0.48/t/08_pass_mb.t
CPANPLUS-YACSmoke-0.48/t/02_test.t
CPANPLUS-YACSmoke-0.48/t/03_config_ys.t
CPANPLUS-YACSmoke-0.48/inc
CPANPLUS-YACSmoke-0.48/inc/Module
CPANPLUS-YACSmoke-0.48/inc/Module/Install.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Makefile.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Scripts.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Metadata.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/WriteAll.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Win32.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Fetch.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/GithubMeta.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Base.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/Can.pm
CPANPLUS-YACSmoke-0.48/inc/Module/Install/AutoLicense.pm
CPANPLUS-YACSmoke-0.48/Changes
CPANPLUS-YACSmoke-0.48/MANIFEST
CPANPLUS-YACSmoke-0.48/lib
CPANPLUS-YACSmoke-0.48/lib/CPANPLUS
CPANPLUS-YACSmoke-0.48/lib/CPANPLUS/YACSmoke.pm
CPANPLUS-YACSmoke-0.48/lib/CPANPLUS/Dist
CPANPLUS-YACSmoke-0.48/lib/CPANPLUS/Dist/YACSmoke.pm
CPANPLUS-YACSmoke-0.48/lib/CPANPLUS/Config
CPANPLUS-YACSmoke-0.48/lib/CPANPLUS/Config/YACSmoke.pm
CPANPLUS-YACSmoke-0.48/META.yml
CPANPLUS-YACSmoke-0.48/Changes.old
CPANPLUS-YACSmoke-0.48/bin
CPANPLUS-YACSmoke-0.48/bin/yactool
CPANPLUS-YACSmoke-0.48/tools
CPANPLUS-YACSmoke-0.48/tools/git-log.pl
CPANPLUS-YACSmoke-0.48/Makefile.PL
CPANPLUS-YACSmoke-0.48/LICENSE
CPANPLUS-YACSmoke-0.48/README

  CPAN.pm: Going to build B/BI/BINGOS/CPANPLUS-YACSmoke-0.48.tar.gz

>>> C:\Perl-5.8\bin\perl.exe Makefile.PL
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


Checking if your kit is complete...
Looks good
Writing Makefile for CPANPLUS::YACSmoke
>>> nmake

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

cp lib/CPANPLUS/YACSmoke.pm blib\lib\CPANPLUS\YACSmoke.pm
cp lib/CPANPLUS/Dist/YACSmoke.pm blib\lib\CPANPLUS\Dist\YACSmoke.pm
cp lib/CPANPLUS/Config/YACSmoke.pm blib\lib\CPANPLUS\Config\YACSmoke.pm
	C:\Perl-5.8\bin\perl.exe "-Iinc" -MExtUtils::Command -e "cp" -- bin/yactool blib\script\yactool
	pl2bat.bat blib\script\yactool
  BINGOS/CPANPLUS-YACSmoke-0.48.tar.gz
  nmake -- OK
Running make test
>>> nmake test TEST_VERBOSE=1

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

	C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib\lib', 'blib\arch')" t/*.t
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


# 
# Testing CPANPLUS::YACSmoke 0.48, Perl 5.008009, C:\Perl-5.8\bin\perl.exe
# Testing CPANPLUS::Dist::YACSmoke 0.48, Perl 5.008009, C:\Perl-5.8\bin\perl.exe
# Testing CPANPLUS::Config::YACSmoke 0.48, Perl 5.008009, C:\Perl-5.8\bin\perl.exe
t/00_use.t ........... 
1..3
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - use CPANPLUS::Dist::YACSmoke;
ok 3 - use CPANPLUS::Config::YACSmoke;
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/01_new.t ........... 
1..7
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/02_test.t .......... 
1..13
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok 8 - found a report in the directory
ok 9 - No extraction messages in the report
not ok 10 - But there is the final extraction message # TODO Mysteriously stopped working on anything less than 5.10.1

#   Failed (TODO) test 'But there is the final extraction message'
#   at t/02_test.t line 48.
not ok 11 - CPANPLUS is prefering Build.PL # TODO Mysteriously stopped working on anything less than 5.10.1

#   Failed (TODO) test 'CPANPLUS is prefering Build.PL'
#   at t/02_test.t line 49.
not ok 12 - Loading YACSmoke database # TODO Mysteriously stopped working on anything less than 5.10.1

#   Failed (TODO) test 'Loading YACSmoke database'
#   at t/02_test.t line 50.
ok 13 - Grade was a FAIL
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\01mailrc.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\02packages.details.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\03modlist.data.gz'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\5.8.9'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\authors'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\sourcefiles.s2.21.c0.9001.stored'
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/03_config_ys.t ..... 
1..6
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - PERL5_YACSMOKE_BASE
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/04_mark.t .......... 
1..16
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok 8 - No mark yet
ok 9 - Setting Foo::Bar to 'PASS'
ok 10 - Foo::Bar is 'PASS'
ok 11 - Setting Foo::Bar to 'FAIL'
ok 12 - Foo::Bar is 'FAIL'
ok 13 - Setting Foo::Bar to 'NA'
ok 14 - Foo::Bar is 'NA'
ok 15 - Setting Foo::Bar to 'UNKNOWN'
ok 16 - Foo::Bar is 'UNKNOWN'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\01mailrc.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\02packages.details.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\03modlist.data.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\sourcefiles.s2.21.c0.9001.stored'
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save



#   Failed test 'Report contains the result of the tests'
#   at t/05_na_detail.t line 49.
# Looks like you failed 1 test of 14.
t/05_na_detail.t ..... 
1..14
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok 8 - found a report in the directory
ok 9 - No extraction messages in the report
not ok 10 - But there is the final extraction message # TODO Mysteriously stopped working on anything less than 5.10.1

#   Failed (TODO) test 'But there is the final extraction message'
#   at t/05_na_detail.t line 45.
not ok 11 - CPANPLUS is prefering Build.PL # TODO Mysteriously stopped working on anything less than 5.10.1

#   Failed (TODO) test 'CPANPLUS is prefering Build.PL'
#   at t/05_na_detail.t line 46.
not ok 12 - Loading YACSmoke database # TODO Mysteriously stopped working on anything less than 5.10.1

#   Failed (TODO) test 'Loading YACSmoke database'
#   at t/05_na_detail.t line 47.
not ok 13 - Report contains the result of the tests
ok 14 - Grade was an NA
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\01mailrc.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\02packages.details.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\03modlist.data.gz'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\5.8.9'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\authors'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\sourcefiles.s2.21.c0.9001.stored'
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/14 subtests 
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/06_excluded.t ...... 
1..8
ok 1 - use CPANPLUS::YACSmoke;
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok 8 - Foo-Bar-0.01 is excluded
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\01mailrc.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\02packages.details.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\03modlist.data.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.ini'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\sourcefiles.s2.21.c0.9001.stored'
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save



#   Failed test 'Report contains the result of the tests'
#   at t/07_pass_mm.t line 43.
# Looks like you failed 1 test of 11.
t/07_pass_mm.t ....... 
1..11
ok 1 - use CPANPLUS::YACSmoke;
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok 8 - found a report in the directory
ok 9 - No extraction messages in the report
not ok 10 - Report contains the result of the tests
ok 11 - Grade was an PASS
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\01mailrc.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\02packages.details.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\03modlist.data.gz'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\5.8.9'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\authors'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\sourcefiles.s2.21.c0.9001.stored'
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/11 subtests 
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save



#   Failed test 'Report contains the result of the tests'
#   at t/08_pass_mb.t line 43.
# Looks like you failed 1 test of 11.
t/08_pass_mb.t ....... 
1..11
ok 1 - use CPANPLUS::YACSmoke;
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
ok 2 - The object isa CPANPLUS::YACSmoke
ok 3 - AUTOMATED_TESTING is set
ok 4 - PERL_MM_USE_DEFAULT is set
ok 5 - MAILDOMAIN is set
ok 6 - The object isa CPANPLUS::Configure
ok 7 - The object isa CPANPLUS::Backend
ok 8 - found a report in the directory
ok 9 - No extraction messages in the report
not ok 10 - Report contains the result of the tests
ok 11 - Grade was an PASS
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\01mailrc.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\02packages.details.txt.gz'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\03modlist.data.gz'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\5.8.9'
# Deleting directory 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\authors'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.dir'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\cpansmoke.dat.pag'
# Deleting file 'C:\cpanfly-5.8\var\cpan\build\CPANPLUS-YACSmoke-0.48-aurCW_\t\dummy-cpanplus\sourcefiles.s2.21.c0.9001.stored'
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/11 subtests 
t/99_pod.t ........... 
1..4
ok 1 - blib\script\yactool
ok 2 - blib\lib\CPANPLUS\YACSmoke.pm
ok 3 - blib\lib\CPANPLUS\Config\YACSmoke.pm
ok 4 - blib\lib\CPANPLUS\Dist\YACSmoke.pm
ok
[ERROR] Could not find the 'cpanp-run-perl' binary in your path--this may be a problem.
Please locate this program and set your 'perlwrapper' config entry to its path.
From the default shell, you can do this by typing:

  s program perlwrapper FULL_PATH_TO_CPANP_RUN_PERL
  s save


t/99_pod_coverage.t .. 
1..3
ok 1 - Pod coverage on CPANPLUS::YACSmoke
ok 2 - Pod coverage on CPANPLUS::Config::YACSmoke
ok 3 - Pod coverage on CPANPLUS::Dist::YACSmoke
ok

Test Summary Report
-------------------
t/05_na_detail.t   (Wstat: 256 Tests: 14 Failed: 1)
  Failed test:  13
  Non-zero exit status: 1
t/07_pass_mm.t     (Wstat: 256 Tests: 11 Failed: 1)
  Failed test:  10
  Non-zero exit status: 1
t/08_pass_mb.t     (Wstat: 256 Tests: 11 Failed: 1)
  Failed test:  10
  Non-zero exit status: 1
Files=11, Tests=96, 28 wallclock secs ( 0.03 usr +  0.05 sys =  0.08 CPU)
Result: FAIL
Failed 3/11 test programs. 3/96 subtests failed.
NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff'
Stop.
  BINGOS/CPANPLUS-YACSmoke-0.48.tar.gz
  nmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports BINGOS/CPANPLUS-YACSmoke-0.48.tar.gz
Finished 2010-02-16T07:23:34