Start 2009-09-15T13:46:37
ActivePerl-825 CPAN-1.9402
LIB=C:\PROGRA~1\MICROS~4\VC98\Lib\PSDK;C:\PROGRA~1\MICROS~2\Lib;C:\PROGRA~1\MICROS~4\VC98\Lib;C:\PROGRA~1\MICROS~4\VC98\MFC\Lib
INCLUDE=C:\PROGRA~1\MICROS~2\Include;C:\PROGRA~1\MICROS~4\VC98\ATL\Include;C:\PROGRA~1\MICROS~4\VC98\Include;C:\PROGRA~1\MICROS~4\VC98\MFC\Include
PATH=C:/CPANFL~1.8/var/libs/bin;C:\PROGRA~1\MICROS~2\Bin;C:\PROGRA~1\MICROS~2\Bin\WinNT;C:\PROGRA~1\MICROS~4\VC98\Bin;C:\PROGRA~1\MICROS~4\Common\MSDev98\Bin;C:\Perl-5.8\site\bin;C:\Perl-5.8\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0;C:\PROGRA~1\Perforce
Going to read 'C:\cpanfly-5.8\var\cpan\Metadata'
  Database was generated on Tue, 15 Sep 2009 10:27:08 GMT
Running make for V/VV/VVELOX/X11-Resolution-0.0.0.tar.gz
Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\X11-Resolution-0.0.0.tar.gz ok
Will not use Archive::Tar, need 1.00
X11-Resolution-0.0.0/
X11-Resolution-0.0.0/t/
X11-Resolution-0.0.0/lib/
X11-Resolution-0.0.0/Changes
X11-Resolution-0.0.0/README
X11-Resolution-0.0.0/MANIFEST
X11-Resolution-0.0.0/.cvsignore
X11-Resolution-0.0.0/Makefile.PL
X11-Resolution-0.0.0/lib/X11/
X11-Resolution-0.0.0/lib/X11/Resolution.pm
X11-Resolution-0.0.0/t/pod-coverage.t
X11-Resolution-0.0.0/t/pod.t
X11-Resolution-0.0.0/t/boilerplate.t
X11-Resolution-0.0.0/t/00-load.t

  CPAN.pm: Going to build V/VV/VVELOX/X11-Resolution-0.0.0.tar.gz

>>> C:\Perl-5.8\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite X11::Protocol 0 not found.
Writing Makefile for X11::Resolution
---- Unsatisfied dependencies detected during ----
----    VVELOX/X11-Resolution-0.0.0.tar.gz    ----
    X11::Protocol [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'X11::Protocol'
Running make for S/SM/SMCCAM/X11-Protocol-0.56.tar.gz
Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\S\SM\SMCCAM\X11-Protocol-0.56.tar.gz ok
Will not use Archive::Tar, need 1.00
X11-Protocol-0.56/
X11-Protocol-0.56/Makefile.PL
X11-Protocol-0.56/README
X11-Protocol-0.56/Changes
X11-Protocol-0.56/META.yml
X11-Protocol-0.56/Todo
X11-Protocol-0.56/Auth.pm
X11-Protocol-0.56/Keysyms.pm
X11-Protocol-0.56/test.pl
X11-Protocol-0.56/Protocol/
X11-Protocol-0.56/Protocol/Connection.pm
X11-Protocol-0.56/Protocol/Connection/
X11-Protocol-0.56/Protocol/Connection/INETFH.pm
X11-Protocol-0.56/Protocol/Connection/Socket.pm
X11-Protocol-0.56/Protocol/Connection/INETSocket.pm
X11-Protocol-0.56/Protocol/Connection/UNIXFH.pm
X11-Protocol-0.56/Protocol/Connection/FileHandle.pm
X11-Protocol-0.56/Protocol/Connection/UNIXSocket.pm
X11-Protocol-0.56/Protocol/Constants.pm
X11-Protocol-0.56/Protocol/Ext/
X11-Protocol-0.56/Protocol/Ext/RENDER.pm
X11-Protocol-0.56/Protocol/Ext/XC_MISC.pm
X11-Protocol-0.56/Protocol/Ext/DPMS.pm
X11-Protocol-0.56/Protocol/Ext/SHAPE.pm
X11-Protocol-0.56/Protocol/Ext/BIG_REQUESTS.pm
X11-Protocol-0.56/Protocol/Ext/XFree86_Misc.pm
X11-Protocol-0.56/Protocol.pm
X11-Protocol-0.56/eg/
X11-Protocol-0.56/eg/widgets1.pl
X11-Protocol-0.56/eg/random-win.pl
X11-Protocol-0.56/eg/wintree.pl
X11-Protocol-0.56/eg/teletype.pl
X11-Protocol-0.56/eg/widgets2.pl
X11-Protocol-0.56/eg/widgets3.pl
X11-Protocol-0.56/eg/long-run.pl
X11-Protocol-0.56/eg/render-test.pl
X11-Protocol-0.56/eg/full_test.pl
X11-Protocol-0.56/eg/render-clock.pl
X11-Protocol-0.56/eg/widgets.c
X11-Protocol-0.56/eg/anim.pl
X11-Protocol-0.56/MANIFEST

  CPAN.pm: Going to build S/SM/SMCCAM/X11-Protocol-0.56.tar.gz

>>> C:\Perl-5.8\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for X11::Protocol
>>> nmake

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

cp Protocol.pm blib\lib\X11\Protocol.pm
cp Protocol/Ext/SHAPE.pm blib\lib\X11\Protocol\Ext\SHAPE.pm
cp Protocol/Ext/XC_MISC.pm blib\lib\X11\Protocol\Ext\XC_MISC.pm
cp Protocol/Ext/BIG_REQUESTS.pm blib\lib\X11\Protocol\Ext\BIG_REQUESTS.pm
cp Protocol/Connection/UNIXFH.pm blib\lib\X11\Protocol\Connection\UNIXFH.pm
cp Protocol/Connection/INETSocket.pm blib\lib\X11\Protocol\Connection\INETSocket.pm
cp Protocol/Ext/XFree86_Misc.pm blib\lib\X11\Protocol\Ext\XFree86_Misc.pm
cp Keysyms.pm blib\lib\X11\Keysyms.pm
cp Protocol/Connection/Socket.pm blib\lib\X11\Protocol\Connection\Socket.pm
cp Protocol/Constants.pm blib\lib\X11\Protocol\Constants.pm
cp Auth.pm blib\lib\X11\Auth.pm
cp Protocol/Connection/UNIXSocket.pm blib\lib\X11\Protocol\Connection\UNIXSocket.pm
cp Protocol/Ext/DPMS.pm blib\lib\X11\Protocol\Ext\DPMS.pm
cp Protocol/Ext/RENDER.pm blib\lib\X11\Protocol\Ext\RENDER.pm
cp Protocol/Connection/INETFH.pm blib\lib\X11\Protocol\Connection\INETFH.pm
cp Protocol/Connection/FileHandle.pm blib\lib\X11\Protocol\Connection\FileHandle.pm
cp Protocol/Connection.pm blib\lib\X11\Protocol\Connection.pm
  SMCCAM/X11-Protocol-0.56.tar.gz
  nmake -- OK
Running make test
>>> nmake test TEST_VERBOSE=1

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

	C:\Perl-5.8\bin\perl.exe "-Iblib\lib" "-Iblib\arch" test.pl
1..3
ok 1
Can't find DISPLAY -- guessing `localhost:0' at test.pl line 32
Can't connect to display `localhost:0': Unknown error at blib\lib/X11/Protocol.pm line 2270
NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0x274d'
Stop.
  SMCCAM/X11-Protocol-0.56.tar.gz
  nmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports SMCCAM/X11-Protocol-0.56.tar.gz
Running make for V/VV/VVELOX/X11-Resolution-0.0.0.tar.gz
  Has already been unwrapped into directory C:\cpanfly-5.8\var\cpan\build\X11-Resolution-0.0.0-UW3U5w

  CPAN.pm: Going to build V/VV/VVELOX/X11-Resolution-0.0.0.tar.gz

Warning: Prerequisite 'X11::Protocol => 0' for 'VVELOX/X11-Resolution-0.0.0.tar.gz' failed when processing 'SMCCAM/X11-Protocol-0.56.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
>>> nmake

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

cp lib/X11/Resolution.pm blib\lib\X11\Resolution.pm
  VVELOX/X11-Resolution-0.0.0.tar.gz
  nmake -- OK
Running make test
>>> nmake test TEST_VERBOSE=1

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

	C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t

#   Failed test 'use X11::Resolution;'
#   at t/00-load.t line 6.
#     Tried to use 'X11::Resolution'.
#     Error:  Can't locate X11/Protocol.pm in @INC (@INC contains: C:\cpanfly-5.8\var\cpan\build\X11-Resolution-0.0.0-UW3U5w\blib\lib C:\cpanfly-5.8\var\cpan\build\X11-Resolution-0.0.0-UW3U5w\blib\arch C:/cpanfly-5.8/var/megalib C:/Perl-5.8/site/lib C:/Perl-5.8/lib) at C:\cpanfly-5.8\var\cpan\build\X11-Resolution-0.0.0-UW3U5w\blib\lib/X11/Resolution.pm line 5.
# BEGIN failed--compilation aborted at C:\cpanfly-5.8\var\cpan\build\X11-Resolution-0.0.0-UW3U5w\blib\lib/X11/Resolution.pm line 5.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing X11::Resolution , Perl 5.008009, C:\Perl-5.8\bin\perl.exe
# Looks like you failed 1 test of 1.
t/00-load.t ....... 
1..1
not ok 1 - use X11::Resolution;
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests 
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/X11/Resolution.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on X11::Resolution
ok
t/pod.t ........... 
1..1
ok 1 - blib\lib\X11\Resolution.pm
ok

Test Summary Report
-------------------
t/00-load.t     (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.02 usr +  0.02 sys =  0.03 CPU)
Result: FAIL
Failed 1/4 test programs. 1/6 subtests failed.
NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff'
Stop.
  VVELOX/X11-Resolution-0.0.0.tar.gz
  nmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports VVELOX/X11-Resolution-0.0.0.tar.gz
Finished 2009-09-15T13:46:47