Start 2009-09-15T13:47:50 ActivePerl-825 CPAN-1.9402 LIB=C:\PROGRA~1\MICROS~4\VC98\Lib\PSDK;C:\PROGRA~1\MICROS~2\Lib;C:\PROGRA~1\MICROS~4\VC98\Lib;C:\PROGRA~1\MICROS~4\VC98\MFC\Lib INCLUDE=C:\PROGRA~1\MICROS~2\Include;C:\PROGRA~1\MICROS~4\VC98\ATL\Include;C:\PROGRA~1\MICROS~4\VC98\Include;C:\PROGRA~1\MICROS~4\VC98\MFC\Include PATH=C:/CPANFL~1.8/var/libs/bin;C:\PROGRA~1\MICROS~2\Bin;C:\PROGRA~1\MICROS~2\Bin\WinNT;C:\PROGRA~1\MICROS~4\VC98\Bin;C:\PROGRA~1\MICROS~4\Common\MSDev98\Bin;C:\Perl-5.8\site\bin;C:\Perl-5.8\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0;C:\PROGRA~1\Perforce Going to read 'C:\cpanfly-5.8\var\cpan\Metadata' Database was generated on Tue, 15 Sep 2009 10:27:08 GMT Running make for V/VV/VVELOX/ZConf-Cron-0.0.1.tar.gz Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\ZConf-Cron-0.0.1.tar.gz ok Will not use Archive::Tar, need 1.00 ZConf-Cron-0.0.1/ ZConf-Cron-0.0.1/lib/ ZConf-Cron-0.0.1/bin/ ZConf-Cron-0.0.1/t/ ZConf-Cron-0.0.1/.cvsignore ZConf-Cron-0.0.1/README ZConf-Cron-0.0.1/MANIFEST ZConf-Cron-0.0.1/Makefile.PL ZConf-Cron-0.0.1/Changes ZConf-Cron-0.0.1/t/boilerplate.t ZConf-Cron-0.0.1/t/pod.t ZConf-Cron-0.0.1/t/pod-coverage.t ZConf-Cron-0.0.1/t/00-load.t ZConf-Cron-0.0.1/bin/zccrontab ZConf-Cron-0.0.1/bin/zccron ZConf-Cron-0.0.1/lib/ZConf/ ZConf-Cron-0.0.1/lib/ZConf/Cron.pm CPAN.pm: Going to build V/VV/VVELOX/ZConf-Cron-0.0.1.tar.gz >>> C:\Perl-5.8\bin\perl.exe Makefile.PL Checking if your kit is complete... Looks good Warning: prerequisite ZConf 0 not found. Writing Makefile for ZConf::Cron ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-Cron-0.0.1.tar.gz ---- ZConf [requires] Running make test Delayed until after prerequisites Running test for module 'ZConf' Running make for V/VV/VVELOX/ZConf-1.2.0.tar.gz Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\ZConf-1.2.0.tar.gz ok Will not use Archive::Tar, need 1.00 ZConf-1.2.0/ ZConf-1.2.0/bin/ ZConf-1.2.0/lib/ ZConf-1.2.0/t/ ZConf-1.2.0/.cvsignore ZConf-1.2.0/Changes ZConf-1.2.0/MANIFEST ZConf-1.2.0/Makefile.PL ZConf-1.2.0/README ZConf-1.2.0/TODO ZConf-1.2.0/t/boilerplate.t ZConf-1.2.0/t/pod.t ZConf-1.2.0/t/pod-coverage.t ZConf-1.2.0/t/00-load.t ZConf-1.2.0/lib/ZConf.pm ZConf-1.2.0/bin/zcget ZConf-1.2.0/bin/zcls ZConf-1.2.0/bin/zcrm ZConf-1.2.0/bin/zcset ZConf-1.2.0/bin/zcvdel ZConf-1.2.0/bin/zcvls ZConf-1.2.0/bin/.exists ZConf-1.2.0/bin/zccreate CPAN.pm: Going to build V/VV/VVELOX/ZConf-1.2.0.tar.gz >>> C:\Perl-5.8\bin\perl.exe Makefile.PL Warning: prerequisite Net::LDAP::Makepath 0 not found. Checking if your kit is complete... Looks good Writing Makefile for ZConf ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-1.2.0.tar.gz ---- Net::LDAP::Makepath [requires] Running make test Delayed until after prerequisites Running test for module 'Net::LDAP::Makepath' Running make for V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\Net-LDAP-Makepath-1.0.0.tar.gz ok Will not use Archive::Tar, need 1.00 Net-LDAP-Makepath-1.0.0/ Net-LDAP-Makepath-1.0.0/t/ Net-LDAP-Makepath-1.0.0/lib/ Net-LDAP-Makepath-1.0.0/Changes Net-LDAP-Makepath-1.0.0/README Net-LDAP-Makepath-1.0.0/MANIFEST Net-LDAP-Makepath-1.0.0/.cvsignore Net-LDAP-Makepath-1.0.0/Makefile.PL Net-LDAP-Makepath-1.0.0/lib/Net/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/Makepath.pm Net-LDAP-Makepath-1.0.0/t/pod-coverage.t Net-LDAP-Makepath-1.0.0/t/pod.t Net-LDAP-Makepath-1.0.0/t/boilerplate.t Net-LDAP-Makepath-1.0.0/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz >>> C:\Perl-5.8\bin\perl.exe Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Net::LDAP::Makepath >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp lib/Net/LDAP/Makepath.pm blib\lib\Net\LDAP\Makepath.pm VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz nmake -- OK Running make test >>> nmake test TEST_VERBOSE=1 Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t # Testing Net::LDAP::Makepath 1.0.0, Perl 5.008009, C:\Perl-5.8\bin\perl.exe t/00-load.t ....... 1..1 ok 1 - use Net::LDAP::Makepath; ok t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/Net/LDAP/Makepath.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok # Failed test 'Pod coverage on Net::LDAP::Makepath' # at C:/cpanfly-5.8/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for Net::LDAP::Makepath is 0.0%, with 1 naked subroutine: # LDAPmakepathSimple # Looks like you failed 1 test of 1. t/pod-coverage.t .. 1..1 not ok 1 - Pod coverage on Net::LDAP::Makepath Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod.t ........... 1..1 ok 1 - blib\lib\Net\LDAP\Makepath.pm ok Test Summary Report ------------------- t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 t/pod-coverage.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=6, 0 wallclock secs ( 0.02 usr + 0.01 sys = 0.03 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff' Stop. VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz nmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Running make for V/VV/VVELOX/ZConf-1.2.0.tar.gz Has already been unwrapped into directory C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.0-h6M1br CPAN.pm: Going to build V/VV/VVELOX/ZConf-1.2.0.tar.gz Warning: Prerequisite 'Net::LDAP::Makepath => 0' for 'VVELOX/ZConf-1.2.0.tar.gz' failed when processing 'VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp lib/ZConf.pm blib\lib\ZConf.pm VVELOX/ZConf-1.2.0.tar.gz nmake -- OK Running make test >>> nmake test TEST_VERBOSE=1 Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t # Failed test 'use ZConf;' # at t/00-load.t line 6. # Tried to use 'ZConf'. # Error: Can't locate Net/LDAP/Makepath.pm in @INC (@INC contains: C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.0-h6M1br\blib\lib C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.0-h6M1br\blib\arch C:/cpanfly-5.8/var/megalib C:/Perl-5.8/site/lib C:/Perl-5.8/lib) at C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.0-h6M1br\blib\lib/ZConf.pm line 6, line 275. # BEGIN failed--compilation aborted at C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.0-h6M1br\blib\lib/ZConf.pm line 6, line 275. # Compilation failed in require at (eval 4) line 2, line 275. # BEGIN failed--compilation aborted at (eval 4) line 2, line 275. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9, line 275. # Testing ZConf , Perl 5.008009, C:\Perl-5.8\bin\perl.exe # Looks like you failed 1 test of 1. t/00-load.t ....... 1..1 not ok 1 - use ZConf; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on ZConf ok t/pod.t ........... 1..1 ok 1 - blib\lib\ZConf.pm ok Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=4, Tests=6, 1 wallclock secs ( 0.03 usr + 0.01 sys = 0.05 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff' Stop. VVELOX/ZConf-1.2.0.tar.gz nmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-1.2.0.tar.gz Running make for V/VV/VVELOX/ZConf-Cron-0.0.1.tar.gz Has already been unwrapped into directory C:\cpanfly-5.8\var\cpan\build\ZConf-Cron-0.0.1-h98b7m CPAN.pm: Going to build V/VV/VVELOX/ZConf-Cron-0.0.1.tar.gz Warning: Prerequisite 'ZConf => 0' for 'VVELOX/ZConf-Cron-0.0.1.tar.gz' failed when processing 'VVELOX/ZConf-1.2.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> nmake Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. cp lib/ZConf/Cron.pm blib\lib\ZConf\Cron.pm VVELOX/ZConf-Cron-0.0.1.tar.gz nmake -- OK Running make test >>> nmake test TEST_VERBOSE=1 Microsoft (R) Program Maintenance Utility Version 7.00.8882 Copyright (C) Microsoft Corp 1988-2000. All rights reserved. C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t # Failed test 'use ZConf::Cron;' # at t/00-load.t line 6. # Tried to use 'ZConf::Cron'. # Error: Can't locate ZConf.pm in @INC (@INC contains: C:\cpanfly-5.8\var\cpan\build\ZConf-Cron-0.0.1-h98b7m\blib\lib C:\cpanfly-5.8\var\cpan\build\ZConf-Cron-0.0.1-h98b7m\blib\arch C:/cpanfly-5.8/var/megalib C:/Perl-5.8/site/lib C:/Perl-5.8/lib) at C:\cpanfly-5.8\var\cpan\build\ZConf-Cron-0.0.1-h98b7m\blib\lib/ZConf/Cron.pm line 3. # BEGIN failed--compilation aborted at C:\cpanfly-5.8\var\cpan\build\ZConf-Cron-0.0.1-h98b7m\blib\lib/ZConf/Cron.pm line 3. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9. # Testing ZConf::Cron , Perl 5.008009, C:\Perl-5.8\bin\perl.exe # Looks like you failed 1 test of 1. t/00-load.t ....... 1..1 not ok 1 - use ZConf::Cron; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf/Cron.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on ZConf::Cron ok t/pod.t ........... 1..1 ok 1 - blib\lib\ZConf\Cron.pm ok Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=4, Tests=6, 1 wallclock secs ( 0.03 usr + 0.03 sys = 0.06 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff' Stop. VVELOX/ZConf-Cron-0.0.1.tar.gz nmake test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-Cron-0.0.1.tar.gz Finished 2009-09-15T13:48:02