Start 2009-11-02T21:10:50
ActivePerl-825 CPAN-1.9402
LIB=C:\PROGRA~1\MICROS~4\VC98\Lib\PSDK;C:\PROGRA~1\MICROS~2\Lib;C:\PROGRA~1\MICROS~4\VC98\Lib;C:\PROGRA~1\MICROS~4\VC98\MFC\Lib
INCLUDE=C:\PROGRA~1\MICROS~2\Include;C:\PROGRA~1\MICROS~4\VC98\ATL\Include;C:\PROGRA~1\MICROS~4\VC98\Include;C:\PROGRA~1\MICROS~4\VC98\MFC\Include
PATH=C:/CPANFL~1.8/var/libs/bin;C:\PROGRA~1\MICROS~2\Bin;C:\PROGRA~1\MICROS~2\Bin\WinNT;C:\PROGRA~1\MICROS~4\VC98\Bin;C:\PROGRA~1\MICROS~4\Common\MSDev98\Bin;C:\Perl-5.8\site\bin;C:\Perl-5.8\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WINDOW~2\v1.0;c:\PROGRA~1\Perforce
Going to read 'C:\cpanfly-5.8\var\cpan\Metadata'
  Database was generated on Mon, 02 Nov 2009 23:27:07 GMT
Running make for V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz
Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\ZConf-GUI-1.0.2.tar.gz ok
Will not use Archive::Tar, need 1.00
ZConf-GUI-1.0.2/
ZConf-GUI-1.0.2/lib/
ZConf-GUI-1.0.2/bin/
ZConf-GUI-1.0.2/t/
ZConf-GUI-1.0.2/.cvsignore
ZConf-GUI-1.0.2/README
ZConf-GUI-1.0.2/MANIFEST
ZConf-GUI-1.0.2/Makefile.PL
ZConf-GUI-1.0.2/Changes
ZConf-GUI-1.0.2/t/boilerplate.t
ZConf-GUI-1.0.2/t/pod.t
ZConf-GUI-1.0.2/t/pod-coverage.t
ZConf-GUI-1.0.2/t/00-load.t
ZConf-GUI-1.0.2/bin/zcgui-gux
ZConf-GUI-1.0.2/bin/zcgui-which
ZConf-GUI-1.0.2/bin/zcgui-lm
ZConf-GUI-1.0.2/bin/zcgui-set
ZConf-GUI-1.0.2/bin/zcgui-la
ZConf-GUI-1.0.2/bin/zcgui-get
ZConf-GUI-1.0.2/bin/zcgui-sux
ZConf-GUI-1.0.2/lib/ZConf/
ZConf-GUI-1.0.2/lib/ZConf/GUI.pm

  CPAN.pm: Going to build V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz

>>> C:\Perl-5.8\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Warning: prerequisite ZConf 0 not found.
Writing Makefile for ZConf::GUI
---- Unsatisfied dependencies detected during ----
----       VVELOX/ZConf-GUI-1.0.2.tar.gz      ----
    ZConf [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'ZConf'
Running make for V/VV/VVELOX/ZConf-1.2.1.tar.gz
Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\ZConf-1.2.1.tar.gz ok
Will not use Archive::Tar, need 1.00
ZConf-1.2.1/
ZConf-1.2.1/bin/
ZConf-1.2.1/t/
ZConf-1.2.1/lib/
ZConf-1.2.1/Changes
ZConf-1.2.1/.cvsignore
ZConf-1.2.1/README
ZConf-1.2.1/TODO
ZConf-1.2.1/MANIFEST
ZConf-1.2.1/Makefile.PL
ZConf-1.2.1/lib/ZConf.pm
ZConf-1.2.1/t/boilerplate.t
ZConf-1.2.1/t/pod.t
ZConf-1.2.1/t/pod-coverage.t
ZConf-1.2.1/t/00-load.t
ZConf-1.2.1/bin/zccreate
ZConf-1.2.1/bin/zcvls
ZConf-1.2.1/bin/zcvdel
ZConf-1.2.1/bin/zcset
ZConf-1.2.1/bin/zcls
ZConf-1.2.1/bin/zcrm
ZConf-1.2.1/bin/zcget

  CPAN.pm: Going to build V/VV/VVELOX/ZConf-1.2.1.tar.gz

>>> C:\Perl-5.8\bin\perl.exe Makefile.PL
Warning: prerequisite Net::LDAP::Makepath 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for ZConf
---- Unsatisfied dependencies detected during ----
----         VVELOX/ZConf-1.2.1.tar.gz        ----
    Net::LDAP::Makepath [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Net::LDAP::Makepath'
Running make for V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz
Checksum for C:\cpanfly-5.8\var\cpan\sources\authors\id\V\VV\VVELOX\Net-LDAP-Makepath-1.0.0.tar.gz ok
Will not use Archive::Tar, need 1.00
Net-LDAP-Makepath-1.0.0/
Net-LDAP-Makepath-1.0.0/t/
Net-LDAP-Makepath-1.0.0/lib/
Net-LDAP-Makepath-1.0.0/Changes
Net-LDAP-Makepath-1.0.0/README
Net-LDAP-Makepath-1.0.0/MANIFEST
Net-LDAP-Makepath-1.0.0/.cvsignore
Net-LDAP-Makepath-1.0.0/Makefile.PL
Net-LDAP-Makepath-1.0.0/lib/Net/
Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/
Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/Makepath.pm
Net-LDAP-Makepath-1.0.0/t/pod-coverage.t
Net-LDAP-Makepath-1.0.0/t/pod.t
Net-LDAP-Makepath-1.0.0/t/boilerplate.t
Net-LDAP-Makepath-1.0.0/t/00-load.t

  CPAN.pm: Going to build V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz

>>> C:\Perl-5.8\bin\perl.exe Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Net::LDAP::Makepath
>>> nmake

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

cp lib/Net/LDAP/Makepath.pm blib\lib\Net\LDAP\Makepath.pm
  VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz
  nmake -- OK
Running make test
>>> nmake test TEST_VERBOSE=1

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

	C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t
# Testing Net::LDAP::Makepath 1.0.0, Perl 5.008009, C:\Perl-5.8\bin\perl.exe
t/00-load.t ....... 
1..1
ok 1 - use Net::LDAP::Makepath;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Net/LDAP/Makepath.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok

#   Failed test 'Pod coverage on Net::LDAP::Makepath'
#   at C:/cpanfly-5.8/var/megalib/Test/Pod/Coverage.pm line 126.
# Coverage for Net::LDAP::Makepath is 0.0%, with 1 naked subroutine:
# 	LDAPmakepathSimple
# Looks like you failed 1 test of 1.
t/pod-coverage.t .. 
1..1
not ok 1 - Pod coverage on Net::LDAP::Makepath
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests 
t/pod.t ........... 
1..1
ok 1 - blib\lib\Net\LDAP\Makepath.pm
ok

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
t/pod-coverage.t (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
Files=4, Tests=6,  1 wallclock secs ( 0.00 usr +  0.01 sys =  0.01 CPU)
Result: FAIL
Failed 1/4 test programs. 1/6 subtests failed.
NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff'
Stop.
  VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz
  nmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz
Running make for V/VV/VVELOX/ZConf-1.2.1.tar.gz
  Has already been unwrapped into directory C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.1-3eghon

  CPAN.pm: Going to build V/VV/VVELOX/ZConf-1.2.1.tar.gz

Warning: Prerequisite 'Net::LDAP::Makepath => 0' for 'VVELOX/ZConf-1.2.1.tar.gz' failed when processing 'VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
>>> nmake

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

cp lib/ZConf.pm blib\lib\ZConf.pm
  VVELOX/ZConf-1.2.1.tar.gz
  nmake -- OK
Running make test
>>> nmake test TEST_VERBOSE=1

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

	C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t

#   Failed test 'use ZConf;'
#   at t/00-load.t line 6.
#     Tried to use 'ZConf'.
#     Error:  Can't locate Net/LDAP/Makepath.pm in @INC (@INC contains: C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.1-3eghon\blib\lib C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.1-3eghon\blib\arch C:/cpanfly-5.8/var/megalib C:/Perl-5.8/site/lib C:/Perl-5.8/lib) at C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.1-3eghon\blib\lib/ZConf.pm line 6, <DATA> line 275.
# BEGIN failed--compilation aborted at C:\cpanfly-5.8\var\cpan\build\ZConf-1.2.1-3eghon\blib\lib/ZConf.pm line 6, <DATA> line 275.
# Compilation failed in require at (eval 4) line 2, <DATA> line 275.
# BEGIN failed--compilation aborted at (eval 4) line 2, <DATA> line 275.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9, <DATA> line 275.
# Testing ZConf , Perl 5.008009, C:\Perl-5.8\bin\perl.exe
# Looks like you failed 1 test of 1.
t/00-load.t ....... 
1..1
not ok 1 - use ZConf;
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests 
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/ZConf.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on ZConf
ok
t/pod.t ........... 
1..1
ok 1 - blib\lib\ZConf.pm
ok

Test Summary Report
-------------------
t/00-load.t     (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.00 usr +  0.05 sys =  0.05 CPU)
Result: FAIL
Failed 1/4 test programs. 1/6 subtests failed.
NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff'
Stop.
  VVELOX/ZConf-1.2.1.tar.gz
  nmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports VVELOX/ZConf-1.2.1.tar.gz
Running make for V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz
  Has already been unwrapped into directory C:\cpanfly-5.8\var\cpan\build\ZConf-GUI-1.0.2-ZsKYRP

  CPAN.pm: Going to build V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz

Warning: Prerequisite 'ZConf => 0' for 'VVELOX/ZConf-GUI-1.0.2.tar.gz' failed when processing 'VVELOX/ZConf-1.2.1.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
>>> nmake

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

cp lib/ZConf/GUI.pm blib\lib\ZConf\GUI.pm
  VVELOX/ZConf-GUI-1.0.2.tar.gz
  nmake -- OK
Running make test
>>> nmake test TEST_VERBOSE=1

Microsoft (R) Program Maintenance Utility   Version 7.00.8882
Copyright (C) Microsoft Corp 1988-2000. All rights reserved.

	C:\Perl-5.8\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib\lib', 'blib\arch')" t/*.t

#   Failed test 'use ZConf::GUI;'
#   at t/00-load.t line 6.
#     Tried to use 'ZConf::GUI'.
#     Error:  Can't locate ZConf.pm in @INC (@INC contains: C:\cpanfly-5.8\var\cpan\build\ZConf-GUI-1.0.2-ZsKYRP\blib\lib C:\cpanfly-5.8\var\cpan\build\ZConf-GUI-1.0.2-ZsKYRP\blib\arch C:/cpanfly-5.8/var/megalib C:/Perl-5.8/site/lib C:/Perl-5.8/lib) at C:\cpanfly-5.8\var\cpan\build\ZConf-GUI-1.0.2-ZsKYRP\blib\lib/ZConf/GUI.pm line 6.
# BEGIN failed--compilation aborted at C:\cpanfly-5.8\var\cpan\build\ZConf-GUI-1.0.2-ZsKYRP\blib\lib/ZConf/GUI.pm line 6.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing ZConf::GUI , Perl 5.008009, C:\Perl-5.8\bin\perl.exe
# Looks like you failed 1 test of 1.
t/00-load.t ....... 
1..1
not ok 1 - use ZConf::GUI;
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests 
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/ZConf/GUI.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on ZConf::GUI
ok
t/pod.t ........... 
1..1
ok 1 - blib\lib\ZConf\GUI.pm
ok

Test Summary Report
-------------------
t/00-load.t     (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.00 usr +  0.03 sys =  0.03 CPU)
Result: FAIL
Failed 1/4 test programs. 1/6 subtests failed.
NMAKE : fatal error U1077: 'C:\Perl-5.8\bin\perl.exe' : return code '0xff'
Stop.
  VVELOX/ZConf-GUI-1.0.2.tar.gz
  nmake test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports VVELOX/ZConf-GUI-1.0.2.tar.gz
Finished 2009-11-02T21:11:29