Start 2011-01-04T06:04:11 ActivePerl-1003 CPAN-1.9402 Going to read '/Users/fly1003/var/cpan/Metadata' Database was generated on Mon, 03 Jan 2011 22:37:15 GMT Running make for D/DO/DOY/Package-Stash-0.20.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/D/DO/DOY/Package-Stash-0.20.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/D/DO/DOY/CHECKSUMS Checksum for /Users/fly1003/var/cpan/sources/authors/id/D/DO/DOY/Package-Stash-0.20.tar.gz ok Will not use Archive::Tar, need 1.00 Package-Stash-0.20 Package-Stash-0.20/README Package-Stash-0.20/Changes Package-Stash-0.20/LICENSE Package-Stash-0.20/dist.ini Package-Stash-0.20/META.yml Package-Stash-0.20/MANIFEST Package-Stash-0.20/t Package-Stash-0.20/t/03-io.t Package-Stash-0.20/META.json Package-Stash-0.20/weaver.ini Package-Stash-0.20/t/05-isa.t Package-Stash-0.20/t/04-get.t Package-Stash-0.20/Makefile.PL Package-Stash-0.20/t/01-basic.t Package-Stash-0.20/t/20-leaks.t Package-Stash-0.20/t/06-addsub.t Package-Stash-0.20/t/00-compile.t Package-Stash-0.20/t/10-synopsis.t Package-Stash-0.20/t/release-eol.t Package-Stash-0.20/t/02-extension.t Package-Stash-0.20/t/07-edge-cases.t Package-Stash-0.20/t/21-leaks-debug.t Package-Stash-0.20/t/release-no-tabs.t Package-Stash-0.20/lib/Package Package-Stash-0.20/lib/Package/Stash.pm Package-Stash-0.20/inc Package-Stash-0.20/inc/MMPackageStash.pm Package-Stash-0.20/t/lib/Package Package-Stash-0.20/t/lib/Package/Stash.pm Package-Stash-0.20/t/release-pod-syntax.t Package-Stash-0.20/lib/Package/Stash Package-Stash-0.20/lib/Package/Stash/PP.pm Package-Stash-0.20/t/release-pod-coverage.t Package-Stash-0.20/t/impl-selection Package-Stash-0.20/t/impl-selection/02-env.t Package-Stash-0.20/t/impl-selection/03-var.t Package-Stash-0.20/bin Package-Stash-0.20/bin/package-stash-conflicts Package-Stash-0.20/t/impl-selection/01-choice.t Package-Stash-0.20/t/impl-selection/11-basic-xs.t Package-Stash-0.20/t/impl-selection/10-basic-pp.t /usr/bin/tar: Read 4096 bytes from - Package-Stash-0.20/lib/Package/Stash/Conflicts.pm ---- Unsatisfied dependencies detected during ---- ---- DOY/Package-Stash-0.20.tar.gz ---- Dist::CheckConflicts [build_requires] Running make test Make had some problems, won't test Delayed until after prerequisites Running test for module 'Dist::CheckConflicts' Running make for D/DO/DOY/Dist-CheckConflicts-0.02.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/D/DO/DOY/Dist-CheckConflicts-0.02.tar.gz Checksum for /Users/fly1003/var/cpan/sources/authors/id/D/DO/DOY/Dist-CheckConflicts-0.02.tar.gz ok Will not use Archive::Tar, need 1.00 Dist-CheckConflicts-0.02 Dist-CheckConflicts-0.02/README Dist-CheckConflicts-0.02/Changes Dist-CheckConflicts-0.02/LICENSE Dist-CheckConflicts-0.02/dist.ini Dist-CheckConflicts-0.02/META.yml Dist-CheckConflicts-0.02/MANIFEST Dist-CheckConflicts-0.02/META.json Dist-CheckConflicts-0.02/weaver.ini Dist-CheckConflicts-0.02/t Dist-CheckConflicts-0.02/t/03-dist.t Dist-CheckConflicts-0.02/t/05-also.t Dist-CheckConflicts-0.02/Makefile.PL Dist-CheckConflicts-0.02/t/04-merge.t Dist-CheckConflicts-0.02/t/01-basic.t Dist-CheckConflicts-0.02/t/00-compile.t Dist-CheckConflicts-0.02/t/lib/05 Dist-CheckConflicts-0.02/t/lib/05/Foo.pm Dist-CheckConflicts-0.02/t/lib/03 Dist-CheckConflicts-0.02/t/lib/03/Bar.pm Dist-CheckConflicts-0.02/t/lib/03/Foo.pm Dist-CheckConflicts-0.02/t/lib/02 Dist-CheckConflicts-0.02/t/lib/02/Bar.pm Dist-CheckConflicts-0.02/t/lib/02/Foo.pm Dist-CheckConflicts-0.02/t/release-eol.t Dist-CheckConflicts-0.02/t/02-conflicts.t Dist-CheckConflicts-0.02/t/lib/03/Foo Dist-CheckConflicts-0.02/t/lib/03/Foo/Two.pm Dist-CheckConflicts-0.02/t/lib/03/Bar Dist-CheckConflicts-0.02/t/lib/03/Bar/Two.pm Dist-CheckConflicts-0.02/t/lib/02/Foo Dist-CheckConflicts-0.02/t/lib/02/Foo/Two.pm Dist-CheckConflicts-0.02/t/lib/02/Bar Dist-CheckConflicts-0.02/t/lib/02/Bar/Two.pm Dist-CheckConflicts-0.02/t/release-no-tabs.t Dist-CheckConflicts-0.02/t/lib/03/Foo/Three.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Three.pm Dist-CheckConflicts-0.02/t/lib/02/Foo/Three.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Three.pm Dist-CheckConflicts-0.02/t/release-pod-syntax.t Dist-CheckConflicts-0.02/t/release-pod-coverage.t Dist-CheckConflicts-0.02/t/lib/05/Foo Dist-CheckConflicts-0.02/t/lib/05/Foo/Conflicts.pm Dist-CheckConflicts-0.02/t/lib/05/Bar Dist-CheckConflicts-0.02/t/lib/05/Bar/Conflicts.pm Dist-CheckConflicts-0.02/t/lib/01/Foo Dist-CheckConflicts-0.02/t/lib/01/Foo/Conflicts.pm Dist-CheckConflicts-0.02/t/lib/01/Bar Dist-CheckConflicts-0.02/t/lib/01/Bar/Conflicts.pm Dist-CheckConflicts-0.02/t/lib/04/Foo Dist-CheckConflicts-0.02/t/lib/04/Foo/Conflicts.pm Dist-CheckConflicts-0.02/t/lib/05/Bar/Conflicts2.pm Dist-CheckConflicts-0.02/t/lib/01/Bar/Conflicts3.pm Dist-CheckConflicts-0.02/t/lib/01/Bar/Conflicts2.pm Dist-CheckConflicts-0.02/t/lib/04/Foo/Conflicts2.pm Dist-CheckConflicts-0.02/lib/Dist Dist-CheckConflicts-0.02/lib/Dist/CheckConflicts.pm Dist-CheckConflicts-0.02/t/lib/03/Foo/Conflicts Dist-CheckConflicts-0.02/t/lib/03/Foo/Conflicts/Bad.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts/Bad.pm Dist-CheckConflicts-0.02/t/lib/02/Foo/Conflicts Dist-CheckConflicts-0.02/t/lib/02/Foo/Conflicts/Bad.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts/Bad.pm Dist-CheckConflicts-0.02/t/lib/03/Foo/Conflicts/Good.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts/Bad3.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts/Good.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts/Bad2.pm Dist-CheckConflicts-0.02/t/lib/02/Foo/Conflicts/Good.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts/Bad3.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts/Good.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts/Bad2.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts/Good2.pm Dist-CheckConflicts-0.02/t/lib/03/Bar/Conflicts/Good3.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts/Good2.pm Dist-CheckConflicts-0.02/t/lib/02/Bar/Conflicts/Good3.pm /usr/bin/tar: Read 1024 bytes from - CPAN.pm: Going to build D/DO/DOY/Dist-CheckConflicts-0.02.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Dist::CheckConflicts >>> make cp lib/Dist/CheckConflicts.pm blib/lib/Dist/CheckConflicts.pm Manifying blib/man3/Dist::CheckConflicts.3 DOY/Dist-CheckConflicts-0.02.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Dist::CheckConflicts loaded ok ok t/01-basic.t .............. ok 1 - use Foo::Conflicts; ok 2 - basic conflicts work ok 3 - use Bar::Conflicts; ok 4 - nested conflicts work ok 5 - nested conflicts work ok 6 - nested conflicts work 1..6 ok t/02-conflicts.t .......... ok 1 - use Foo::Conflicts::Good; ok 2 - correct versions for all conflicts ok 3 - no conflict error ok 4 - use Foo::Conflicts::Bad; ok 5 - correct versions for all conflicts ok 6 - correct conflict error ok 7 - use Bar::Conflicts::Good; ok 8 - correct versions for all conflicts ok 9 - no conflict error ok 10 - use Bar::Conflicts::Bad; ok 11 - correct versions for all conflicts ok 12 - correct conflict error 1..12 ok t/03-dist.t ............... ok 1 - use Foo::Conflicts::Good; ok 2 - correct versions for all conflicts ok 3 - no conflict error ok 4 - correct dist ok 5 - use Foo::Conflicts::Bad; ok 6 - correct versions for all conflicts ok 7 - correct conflict error ok 8 - correct dist ok 9 - use Bar::Conflicts::Good; ok 10 - correct versions for all conflicts ok 11 - no conflict error ok 12 - correct dist ok 13 - use Bar::Conflicts::Bad; ok 14 - correct versions for all conflicts ok 15 - correct conflict error ok 16 - correct dist 1..16 ok t/04-merge.t .............. ok 1 - use Foo::Conflicts; ok 2 - got the right conflicts 1..2 ok t/05-also.t ............... ok 1 - use Bar::Conflicts; ok 2 - can detect the proper conflicts module ok 3 - use Bar::Conflicts2; ok 4 - unknown also entries are ignored 1..4 ok t/release-eol.t ........... skipped: these tests are for release candidate testing t/release-no-tabs.t ....... skipped: these tests are for release candidate testing t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing All tests successful. Files=10, Tests=41, 2 wallclock secs ( 0.15 usr 0.18 sys + 1.11 cusr 0.36 csys = 1.80 CPU) Result: PASS DOY/Dist-CheckConflicts-0.02.tar.gz make test TEST_VERBOSE=1 -- OK Jesse Luehrs <doy@cpan.org> declare version conflicts for your dist >>> (cd /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1 && tar cvf - Dist-CheckConflicts-0.02.ppd blib) | gzip -c >/Users/fly1003/var/REPO/D/DO/DOY/Dist-CheckConflicts-0.02.tar.gz Dist-CheckConflicts-0.02.ppd blib/ blib/lib/ blib/lib/Dist/ blib/lib/Dist/CheckConflicts.pm blib/man3/ blib/man3/Dist::CheckConflicts.3 >>> mv /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/Dist-CheckConflicts-0.02.ppd /Users/fly1003/var/REPO/D/DO/DOY Running make for D/DO/DOY/Package-Stash-0.20.tar.gz Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'get' Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build D/DO/DOY/Package-Stash-0.20.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL *** Conflicts detected for Package::Stash: MooseX::Role::WithOverloading is version 0.05, but must be greater than version 0.08 namespace::clean is version 0.18, but must be greater than version 0.18 *** Warning: prerequisite Package::Stash::XS 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Package::Stash ---- Unsatisfied dependencies detected during ---- ---- DOY/Package-Stash-0.20.tar.gz ---- Package::Stash::XS [requires] Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'test' Running make test Delayed until after prerequisites Running test for module 'Package::Stash::XS' Running make for D/DO/DOY/Package-Stash-XS-0.17.tar.gz Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'get' Checksum for /Users/fly1003/var/cpan/sources/authors/id/D/DO/DOY/Package-Stash-XS-0.17.tar.gz ok Will not use Archive::Tar, need 1.00 Package-Stash-XS-0.17 Package-Stash-XS-0.17/XS.xs Package-Stash-XS-0.17/README Package-Stash-XS-0.17/typemap Package-Stash-XS-0.17/Changes Package-Stash-XS-0.17/LICENSE Package-Stash-XS-0.17/dist.ini Package-Stash-XS-0.17/ppport.h Package-Stash-XS-0.17/META.yml Package-Stash-XS-0.17/MANIFEST Package-Stash-XS-0.17/t Package-Stash-XS-0.17/t/03-io.t Package-Stash-XS-0.17/META.json Package-Stash-XS-0.17/weaver.ini Package-Stash-XS-0.17/t/05-isa.t Package-Stash-XS-0.17/t/04-get.t Package-Stash-XS-0.17/Makefile.PL Package-Stash-XS-0.17/t/01-basic.t Package-Stash-XS-0.17/t/20-leaks.t Package-Stash-XS-0.17/t/06-addsub.t Package-Stash-XS-0.17/t/00-compile.t Package-Stash-XS-0.17/t/10-synopsis.t Package-Stash-XS-0.17/t/release-eol.t Package-Stash-XS-0.17/t/02-extension.t Package-Stash-XS-0.17/t/07-edge-cases.t Package-Stash-XS-0.17/t/21-leaks-debug.t Package-Stash-XS-0.17/t/release-no-tabs.t Package-Stash-XS-0.17/t/lib/Package Package-Stash-XS-0.17/t/lib/Package/Stash.pm Package-Stash-XS-0.17/t/release-pod-syntax.t Package-Stash-XS-0.17/lib/Package/Stash /usr/bin/tar: Read 5632 bytes from - Package-Stash-XS-0.17/lib/Package/Stash/XS.pm Package-Stash-XS-0.17/t/release-pod-coverage.t Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build D/DO/DOY/Package-Stash-XS-0.17.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL v-string in use/require non-portable at Makefile.PL line 5. Checking if your kit is complete... Looks good Writing Makefile for Package::Stash::XS >>> make cp lib/Package/Stash/XS.pm blib/lib/Package/Stash/XS.pm /Users/fly1003/bin/perl /Users/fly1003/var/megalib/ExtUtils/xsubpp -typemap /Users/fly1003/ap1003/lib/ExtUtils/typemap -typemap typemap XS.xs > XS.xsc && mv XS.xsc XS.c gcc -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch ppc -arch i386 -nostdinc -B/Developer/SDKs/MacOSX10.4u.sdk/usr/include/gcc -B/Developer/SDKs/MacOSX10.4u.sdk/usr/lib/gcc -isystem/Developer/SDKs/MacOSX10.4u.sdk/usr/include -F/Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks -mmacosx-version-min=10.3 -DUSE_SITECUSTOMIZE -DPRIVLIB_LAST_IN_INC -fno-strict-aliasing -pipe -O3 -DVERSION=\"0.17\" -DXS_VERSION=\"0.17\" "-I/Users/fly1003/ap1003/lib/CORE" XS.c Running Mkbootstrap for Package::Stash::XS () chmod 644 XS.bs rm -f blib/arch/auto/Package/Stash/XS/XS.bundle env MACOSX_DEPLOYMENT_TARGET=10.3 cc -bundle -undefined dynamic_lookup -Wl,-search_paths_first -arch ppc -arch i386 -Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.3 XS.o -o blib/arch/auto/Package/Stash/XS/XS.bundle \ \ chmod 755 blib/arch/auto/Package/Stash/XS/XS.bundle cp XS.bs blib/arch/auto/Package/Stash/XS/XS.bs chmod 644 blib/arch/auto/Package/Stash/XS/XS.bs Manifying blib/man3/Package::Stash::XS.3 DOY/Package-Stash-XS-0.17.tar.gz make -- OK Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Package::Stash::XS loaded ok ok t/01-basic.t .............. ok 1 - ... can't call name() as a class method ok 2 - ... the %foo slot has not been created yet ok 3 - ... the object agrees ok 4 - ... checking doesn' vivify ok 5 - ... created %Foo::foo successfully ok 6 - ... SCALAR shouldnt have been created too ok 7 - ... ARRAY shouldnt have been created too ok 8 - ... CODE shouldnt have been created too ok 9 - ... the %foo slot was created successfully ok 10 - ... the meta agrees ok 11 - ... our %foo was initialized correctly ok 12 - ... our %foo was initialized correctly ok 13 - ... got the right package variable back ok 14 - ... our %foo is the same as the metas ok 15 - ... our %foo was updated correctly ok 16 - ... our %foo was updated correctly ok 17 - ... the @bar slot has not been created yet ok 18 - ... created @Foo::bar successfully ok 19 - ... the @bar slot was created successfully ok 20 - ... the meta agrees ok 21 - ... SCALAR shouldnt have been created too ok 22 - ... HASH shouldnt have been created too ok 23 - ... CODE shouldnt have been created too ok 24 - ... our @bar was initialized correctly ok 25 - ... our @bar was initialized correctly ok 26 - ... the $baz slot has not been created yet ok 27 - ... created $Foo::baz successfully ok 28 - ... the $baz slot was created successfully ok 29 - ... the meta agrees ok 30 - ... ARRAY shouldnt have been created too ok 31 - ... HASH shouldnt have been created too ok 32 - ... CODE shouldnt have been created too ok 33 - ... got the right value back ok 34 - ... our $baz was assigned to correctly ok 35 - ... the meta agrees ok 36 - ... the &funk slot has not been created yet ok 37 - ... created &Foo::funk successfully ok 38 - ... the &funk slot was created successfully ok 39 - ... the meta agrees ok 40 - ... SCALAR shouldnt have been created too ok 41 - ... ARRAY shouldnt have been created too ok 42 - ... HASH shouldnt have been created too ok 43 - ... our &funk exists ok 44 - ... got the right value from the function ok 45 - ... created @Foo::foo successfully ok 46 - ... the @foo slot was added successfully ok 47 - ... got the right values for @Foo::foo ok 48 - ... created &Foo::foo successfully ok 49 - ... the meta agrees ok 50 - ... got the right value for &Foo::foo ok 51 - ... created $Foo::foo successfully ok 52 - ... the meta agrees ok 53 - ... got the right scalar value back ok 54 - ... got the right value from the scalar ok 55 - ... removed %Foo::foo successfully ok 56 - ... the %foo slot was removed successfully ok 57 - ... the @foo slot still exists ok 58 - ... the &foo slot still exists ok 59 - ... the $foo slot still exists ok 60 - ... got the right values for @Foo::foo ok 61 - ... got the right value for &Foo::foo ok 62 - ... got the right value for $Foo::foo ok 63 - ... the %foo slot has been removed successfully ok 64 - ... the @foo slot has NOT been removed ok 65 - ... the &foo slot has NOT been removed ok 66 - ... the $foo slot has NOT been removed ok 67 - ... removed &Foo::foo successfully ok 68 - ... the &foo slot no longer exists ok 69 - ... the @foo slot still exists ok 70 - ... the $foo slot still exists ok 71 - ... got the right values for @Foo::foo ok 72 - ... got the right value for $Foo::foo ok 73 - ... the %foo slot has been removed successfully ok 74 - ... the &foo slot has now been removed ok 75 - ... the @foo slot has NOT been removed ok 76 - ... the $foo slot has NOT been removed ok 77 - ... removed $Foo::foo successfully ok 78 - ... the $foo slot no longer exists ok 79 - ... the @foo slot still exists ok 80 - ... got the right values for @Foo::foo ok 81 - ... the %foo slot has been removed successfully ok 82 - ... the &foo slot has now been removed ok 83 - ... the $foo slot has now been removed ok 84 - ... the @foo slot has NOT been removed ok 85 - ... the fetched symbols are the same as the listed ones ok 86 - ... the fetched symbols are the same as the listed ones ok 87 - ... got the right symbol ok 88 - ... got the right symbol ok 89 - ... the fetched symbols are the same as the listed ones ok 90 - ... got the right symbol ok 91 - got the right ones ok 92 - can't initialize a slot with the wrong type of value ok 93 - can't initialize a slot with the wrong type of value ok 94 - can't initialize a slot with the wrong type of value ok 95 - can't initialize a slot with the wrong type of value ok 96 - got $foo ok 97 - got @foo ok 98 - got %foo ok 99 - got &foo ok 100 - got foo ok 101 - got expected value for $foo ok 102 - got expected value for %foo ok 103 - got expected value for &foo ok 104 - got expected value for @foo ok 105 - got expected value for foo ok 106 - got expected value for $foo ok 107 - got expected value for %bar ok 108 - got expected value for %foo ok 109 - got expected value for &foo ok 110 - got expected value for @foo ok 111 - got expected value for foo ok 112 - got expected value for $foo ok 113 - got expected value for %bar ok 114 - got expected value for %foo ok 115 - got expected value for &foo ok 116 - got expected value for @foo ok 117 - got expected value for foo ok 118 - list_all_symbols ok 119 - list_all_symbols SCALAR ok 120 - list_all_symbols ARRAY ok 121 - list_all_symbols HASH ok 122 - list_all_symbols CODE 1..122 ok t/02-extension.t .......... ok 1 - The object isa My::Package::Stash ok 2 - The object isa Package::Stash ok 3 - ... the %foo slot has not been created yet ok 4 - ... the foo_stash agrees ok 5 - ... the %foo symbol is created succcessfully ok 6 - ... the %foo slot has not been created in the actual Foo package ok 7 - ... the foo_stash agrees ok 8 - ... got the right package variable back ok 9 - ... our %foo is the same as the foo_stashs ok 10 - ... the @bar slot has not been created yet ok 11 - ... created @Foo::bar successfully ok 12 - ... the @bar slot has still not been created ok 13 - ... the %baz slot has not been created yet ok 14 - ... created %Foo::baz successfully ok 15 - ... the %baz slot has still not been created 1..15 ok t/03-io.t ................. ok 1 - has &foo ok 2 - has foo ok 3 - has &foo ok 4 - has foo ok 5 - has &bar ok 6 - has bar ok 7 - has &bar ok 8 - has bar ok 9 - can add an IO symbol ok 10 - has baz ok 11 - got the right baz 1..11 ok t/04-get.t ................ ok 1 - got nothing yet ok 2 - got something ok 3 - got the right variable ok 4 - stash has the right variable ok 5 - got nothing yet ok 6 - got something ok 7 - got the right variable ok 8 - stash has the right variable ok 9 - got nothing yet ok 10 - got something ok 11 - got the right variable ok 12 - stash has the right variable ok 13 - got nothing yet ok 14 - got something ok 15 - got the right variable ok 16 - got the right variable ok 17 - got the right variable ok 18 - stash has the right variable ok 19 - got nothing yet ok 20 - The object isa IO ok 21 - got the right variable ok 22 - The object isa IO ok 23 - stash has the right variable ok 24 - The object isa IO ok 25 - got the right variable ok 26 - got something ok 27 - got the right variable ok 28 - stash has the right variable ok 29 - got something ok 30 - got the right variable ok 31 - stash has the right variable ok 32 - got something ok 33 - got the right variable ok 34 - stash has the right variable ok 35 - The object isa IO ok 36 - stash has the right variable 1..36 ok t/05-isa.t ................ ok 1 - The class isa Bar 1..1 ok t/06-addsub.t ............. ok 1 - ... the &funk slot has not been created yet ok 2 - ... created &Foo::funk successfully ok 3 - ... the &funk slot was created successfully ok 4 - ... our &funk exists ok 5 - ... got the right value from the function ok 6 ok 7 1..7 ok t/07-edge-cases.t ......... ok 1 - $SCALAR ok 2 - $SCALAR_WITH_VALUE ok 3 - @ARRAY ok 4 - %HASH ok 5 - can see all code symbols ok 6 - $added ok 7 - @added ok 8 - %added ok 9 - expanded a constant into a coderef ok 10 - nothing yet ok 11 - got an empty scalar 1..11 ok t/10-synopsis.t ........... ok 1 - set in the stash properly ok 2 - doesn't have anything in scalar slot ok 3 - namespace works properly 1..3 ok # Failed test 'get_symbol doesn't leak during glob expansion (leaks 1 <= 0)' # at t/20-leaks.t line 180. # '1' # <= # '0' # leaked ARRAY(0x186a910) from t/20-leaks.t line 178. # 177: my $quux = Package::Stash->new("Quux$i"); # 178: $quux->get_or_add_symbol('@ISA'); # 179: delete $::{'Quux' . $i . '::'}; # SV = PVAV(0x18659c0) at 0x186a910 # REFCNT = 1 # FLAGS = () # ARRAY = 0x616520 # FILL = 0 # MAX = 3 # ARYLEN = 0x0 # FLAGS = () # Elt No. 0 # SV = 0 # Looks like you failed 1 test of 25. t/20-leaks.t .............. ok 1 - object construction doesn't leak (leaks 0 <= 0) ok 2 - object construction doesn't leak, with an existing package (leaks 0 <= 0) ok 3 - object construction doesn't leak, with an existing package with things in it (leaks 0 <= 0) ok 4 - accessors don't leak (leaks 0 <= 0) ok 5 - add_symbol doesn't leak (leaks 0 <= 0) ok 6 - add_symbol doesn't leak (leaks 0 <= 0) ok 7 - sub installed correctly ok 8 - code_init exists ok 9 - remove_symbol doesn't leak (leaks 0 <= 0) ok 10 - remove_glob doesn't leak (leaks 0 <= 0) ok 11 - has_symbol doesn't leak (leaks 0 <= 0) ok 12 - get_symbol doesn't leak (leaks 0 <= 0) ok 13 ok 14 ok 15 - get_or_add_symbol doesn't leak (leaks 0 <= 0) ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 - The class isa Exporter ok 22 - list_all_symbols doesn't leak (leaks 0 <= 0) ok 23 - get_all_symbols doesn't leak (leaks 0 <= 0) not ok 24 - get_symbol doesn't leak during glob expansion (leaks 1 <= 0) ok 25 - doesn't leak on errors (leaks 0 <= 0) 1..25 Dubious, test returned 1 (wstat 256, 0x100) Failed 1/25 subtests # Failed test 'get_symbol doesn't leak during glob expansion (leaks 1 <= 0)' # at t/21-leaks-debug.t line 182. # '1' # <= # '0' # leaked ARRAY(0x186b0b0) from t/21-leaks-debug.t line 180. # 179: my $quux = Package::Stash->new("Quux$i"); # 180: $quux->get_or_add_symbol('@ISA'); # 181: delete $::{'Quux' . $i . '::'}; # SV = PVAV(0x1817620) at 0x186b0b0 # REFCNT = 1 # FLAGS = () # ARRAY = 0x6198f0 # FILL = 0 # MAX = 3 # ARYLEN = 0x0 # FLAGS = () # Elt No. 0 # SV = 0 # Looks like you failed 1 test of 25. t/21-leaks-debug.t ........ ok 1 - object construction doesn't leak (leaks 0 <= 0) ok 2 - object construction doesn't leak, with an existing package (leaks 0 <= 0) ok 3 - object construction doesn't leak, with an existing package with things in it (leaks 0 <= 0) ok 4 - accessors don't leak (leaks 0 <= 0) ok 5 - add_symbol doesn't leak (leaks 0 <= 0) ok 6 - add_symbol doesn't leak (leaks 0 <= 0) ok 7 - sub installed correctly ok 8 - code_init exists ok 9 - remove_symbol doesn't leak (leaks 0 <= 0) ok 10 - remove_glob doesn't leak (leaks 0 <= 0) ok 11 - has_symbol doesn't leak (leaks 0 <= 0) ok 12 - get_symbol doesn't leak (leaks 0 <= 0) ok 13 ok 14 ok 15 - get_or_add_symbol doesn't leak (leaks 0 <= 0) ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 - The class isa Exporter ok 22 - list_all_symbols doesn't leak (leaks 0 <= 0) ok 23 - get_all_symbols doesn't leak (leaks 0 <= 0) not ok 24 - get_symbol doesn't leak during glob expansion (leaks 1 <= 0) ok 25 - doesn't leak on errors (leaks 0 <= 0) 1..25 Dubious, test returned 1 (wstat 256, 0x100) Failed 1/25 subtests t/release-eol.t ........... skipped: these tests are for release candidate testing t/release-no-tabs.t ....... skipped: these tests are for release candidate testing t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/20-leaks.t (Wstat: 256 Tests: 25 Failed: 1) Failed test: 24 Non-zero exit status: 1 t/21-leaks-debug.t (Wstat: 256 Tests: 25 Failed: 1) Failed test: 24 Non-zero exit status: 1 Files=15, Tests=257, 4 wallclock secs ( 0.28 usr 0.25 sys + 1.48 cusr 0.49 csys = 2.50 CPU) Result: FAIL Failed 2/15 test programs. 2/257 subtests failed. make: *** [test_dynamic] Error 255 DOY/Package-Stash-XS-0.17.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports DOY/Package-Stash-XS-0.17.tar.gz Running make for D/DO/DOY/Package-Stash-0.20.tar.gz Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /Users/fly1003/var/cpan/build/Package-Stash-0.20-8G1atM Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build D/DO/DOY/Package-Stash-0.20.tar.gz Warning: Prerequisite 'Package::Stash::XS => 0' for 'DOY/Package-Stash-0.20.tar.gz' failed when processing 'DOY/Package-Stash-XS-0.17.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Package/Stash/Conflicts.pm blib/lib/Package/Stash/Conflicts.pm cp lib/Package/Stash/PP.pm blib/lib/Package/Stash/PP.pm cp lib/Package/Stash.pm blib/lib/Package/Stash.pm cp bin/package-stash-conflicts blib/script/package-stash-conflicts /Users/fly1003/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/package-stash-conflicts Manifying blib/man1/package-stash-conflicts.1 Manifying blib/man3/Package::Stash::PP.3 Manifying blib/man3/Package::Stash::Conflicts.3 Manifying blib/man3/Package::Stash.3 DOY/Package-Stash-0.20.tar.gz make -- OK Prepending /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/arch /Users/fly1003/var/cpan/build/Dist-CheckConflicts-0.02-Nv9ZM1/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/impl-selection/*.t t/00-compile.t .................. 1..4 ok 1 - Package::Stash loaded ok ok 2 - Package::Stash::Conflicts loaded ok ok 3 - Package::Stash::PP loaded ok ok 4 - package-stash-conflicts script compiles ok t/01-basic.t .................... ok 1 - ... can't call name() as a class method ok 2 - ... the %foo slot has not been created yet ok 3 - ... the object agrees ok 4 - ... checking doesn' vivify ok 5 - ... created %Foo::foo successfully ok 6 - ... SCALAR shouldnt have been created too ok 7 - ... ARRAY shouldnt have been created too ok 8 - ... CODE shouldnt have been created too ok 9 - ... the %foo slot was created successfully ok 10 - ... the meta agrees ok 11 - ... our %foo was initialized correctly ok 12 - ... our %foo was initialized correctly ok 13 - ... got the right package variable back ok 14 - ... our %foo is the same as the metas ok 15 - ... our %foo was updated correctly ok 16 - ... our %foo was updated correctly ok 17 - ... the @bar slot has not been created yet ok 18 - ... created @Foo::bar successfully ok 19 - ... the @bar slot was created successfully ok 20 - ... the meta agrees ok 21 - ... SCALAR shouldnt have been created too ok 22 - ... HASH shouldnt have been created too ok 23 - ... CODE shouldnt have been created too ok 24 - ... our @bar was initialized correctly ok 25 - ... our @bar was initialized correctly ok 26 - ... the $baz slot has not been created yet ok 27 - ... created $Foo::baz successfully ok 28 - ... the $baz slot was created successfully ok 29 - ... the meta agrees ok 30 - ... ARRAY shouldnt have been created too ok 31 - ... HASH shouldnt have been created too ok 32 - ... CODE shouldnt have been created too ok 33 - ... got the right value back ok 34 - ... our $baz was assigned to correctly ok 35 - ... the meta agrees ok 36 - ... the &funk slot has not been created yet ok 37 - ... created &Foo::funk successfully ok 38 - ... the &funk slot was created successfully ok 39 - ... the meta agrees ok 40 - ... SCALAR shouldnt have been created too ok 41 - ... ARRAY shouldnt have been created too ok 42 - ... HASH shouldnt have been created too ok 43 - ... our &funk exists ok 44 - ... got the right value from the function ok 45 - ... created @Foo::foo successfully ok 46 - ... the @foo slot was added successfully ok 47 - ... got the right values for @Foo::foo ok 48 - ... created &Foo::foo successfully ok 49 - ... the meta agrees ok 50 - ... got the right value for &Foo::foo ok 51 - ... created $Foo::foo successfully ok 52 - ... the meta agrees ok 53 - ... got the right scalar value back ok 54 - ... got the right value from the scalar ok 55 - ... removed %Foo::foo successfully ok 56 - ... the %foo slot was removed successfully ok 57 - ... the @foo slot still exists ok 58 - ... the &foo slot still exists ok 59 - ... the $foo slot still exists ok 60 - ... got the right values for @Foo::foo ok 61 - ... got the right value for &Foo::foo ok 62 - ... got the right value for $Foo::foo ok 63 - ... the %foo slot has been removed successfully ok 64 - ... the @foo slot has NOT been removed ok 65 - ... the &foo slot has NOT been removed ok 66 - ... the $foo slot has NOT been removed ok 67 - ... removed &Foo::foo successfully ok 68 - ... the &foo slot no longer exists ok 69 - ... the @foo slot still exists ok 70 - ... the $foo slot still exists ok 71 - ... got the right values for @Foo::foo ok 72 - ... got the right value for $Foo::foo ok 73 - ... the %foo slot has been removed successfully ok 74 - ... the &foo slot has now been removed ok 75 - ... the @foo slot has NOT been removed ok 76 - ... the $foo slot has NOT been removed ok 77 - ... removed $Foo::foo successfully ok 78 - ... the $foo slot no longer exists ok 79 - ... the @foo slot still exists ok 80 - ... got the right values for @Foo::foo ok 81 - ... the %foo slot has been removed successfully ok 82 - ... the &foo slot has now been removed ok 83 - ... the $foo slot has now been removed ok 84 - ... the @foo slot has NOT been removed ok 85 - ... the fetched symbols are the same as the listed ones ok 86 - ... the fetched symbols are the same as the listed ones ok 87 - ... got the right symbol ok 88 - ... got the right symbol ok 89 - ... the fetched symbols are the same as the listed ones ok 90 - ... got the right symbol ok 91 - got the right ones ok 92 - can't initialize a slot with the wrong type of value ok 93 - can't initialize a slot with the wrong type of value ok 94 - can't initialize a slot with the wrong type of value ok 95 - can't initialize a slot with the wrong type of value ok 96 - got $foo ok 97 - got @foo ok 98 - got %foo ok 99 - got &foo ok 100 - got foo ok 101 - got expected value for $foo ok 102 - got expected value for %foo ok 103 - got expected value for &foo ok 104 - got expected value for @foo ok 105 - got expected value for foo ok 106 - got expected value for $foo ok 107 - got expected value for %bar ok 108 - got expected value for %foo ok 109 - got expected value for &foo ok 110 - got expected value for @foo ok 111 - got expected value for foo ok 112 - got expected value for $foo ok 113 - got expected value for %bar ok 114 - got expected value for %foo ok 115 - got expected value for &foo ok 116 - got expected value for @foo ok 117 - got expected value for foo ok 118 - list_all_symbols not ok 119 - list_all_symbols SCALAR # TODO undef scalars aren't visible on 5.8, or from pure perl at all # Failed (TODO) test 'list_all_symbols SCALAR' # at t/01-basic.t line 397. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = 'foo' ok 120 - list_all_symbols ARRAY ok 121 - list_all_symbols HASH ok 122 - list_all_symbols CODE 1..122 ok t/02-extension.t ................ ok 1 - The object isa My::Package::Stash ok 2 - The object isa Package::Stash ok 3 - ... the %foo slot has not been created yet ok 4 - ... the foo_stash agrees ok 5 - ... the %foo symbol is created succcessfully ok 6 - ... the %foo slot has not been created in the actual Foo package ok 7 - ... the foo_stash agrees ok 8 - ... got the right package variable back ok 9 - ... our %foo is the same as the foo_stashs ok 10 - ... the @bar slot has not been created yet ok 11 - ... created @Foo::bar successfully ok 12 - ... the @bar slot has still not been created ok 13 - ... the %baz slot has not been created yet ok 14 - ... created %Foo::baz successfully ok 15 - ... the %baz slot has still not been created 1..15 ok t/03-io.t ....................... ok 1 - has &foo ok 2 - has foo ok 3 - has &foo ok 4 - has foo ok 5 - has &bar ok 6 - has bar ok 7 - has &bar ok 8 - has bar ok 9 - can add an IO symbol ok 10 - has baz ok 11 - got the right baz 1..11 ok t/04-get.t ...................... ok 1 - got nothing yet ok 2 - got something ok 3 - got the right variable ok 4 - stash has the right variable ok 5 - got nothing yet ok 6 - got something ok 7 - got the right variable ok 8 - stash has the right variable ok 9 - got nothing yet ok 10 - got something ok 11 - got the right variable ok 12 - stash has the right variable ok 13 - got nothing yet ok 14 - got something ok 15 - got the right variable ok 16 - got the right variable ok 17 - got the right variable ok 18 - stash has the right variable ok 19 - got nothing yet ok 20 - The object isa IO ok 21 - got the right variable ok 22 - The object isa IO ok 23 - stash has the right variable ok 24 - The object isa IO ok 25 - got the right variable ok 26 - got something ok 27 - got the right variable ok 28 - stash has the right variable ok 29 - got something ok 30 - got the right variable ok 31 - stash has the right variable ok 32 - got something ok 33 - got the right variable ok 34 - stash has the right variable ok 35 - The object isa IO ok 36 - stash has the right variable 1..36 ok t/05-isa.t ...................... ok 1 - The class isa Bar 1..1 ok t/06-addsub.t ................... ok 1 - ... the &funk slot has not been created yet ok 2 - ... created &Foo::funk successfully ok 3 - ... the &funk slot was created successfully ok 4 - ... our &funk exists ok 5 - ... got the right value from the function ok 6 ok 7 1..7 ok t/07-edge-cases.t ............... not ok 1 - $SCALAR # TODO undef scalars aren't visible on 5.8, or from pure perl at all # Failed (TODO) test '$SCALAR' # at t/07-edge-cases.t line 31. ok 2 - $SCALAR_WITH_VALUE ok 3 - @ARRAY ok 4 - %HASH ok 5 - can see all code symbols ok 6 - $added ok 7 - @added ok 8 - %added ok 9 - expanded a constant into a coderef ok 10 - nothing yet ok 11 - got an empty scalar 1..11 ok t/10-synopsis.t ................. ok 1 - set in the stash properly ok 2 - doesn't have anything in scalar slot ok 3 - namespace works properly 1..3 ok # Failed test 'get_symbol doesn't leak during glob expansion (leaks 1 <= 0)' # at t/20-leaks.t line 180. # '1' # <= # '0' # leaked ARRAY(0x186a760) from /Users/fly1003/var/cpan/build/Package-Stash-0.20-8G1atM/blib/lib/Package/Stash/PP.pm line 114. # 113: no warnings 'redefine', 'misc', 'prototype'; # 114: *{$pkg . '::' . $name} = ref $initial_value ? $initial_value : \$initial_value; # 115:} # SV = PVAV(0x1867154) at 0x186a760 # REFCNT = 1 # FLAGS = () # ARRAY = 0x618110 # FILL = 0 # MAX = 3 # ARYLEN = 0x0 # FLAGS = () # Elt No. 0 # SV = 0 # Looks like you failed 1 test of 25. t/20-leaks.t .................... ok 1 - object construction doesn't leak (leaks 0 <= 0) ok 2 - object construction doesn't leak, with an existing package (leaks 0 <= 0) ok 3 - object construction doesn't leak, with an existing package with things in it (leaks 0 <= 0) ok 4 - accessors don't leak (leaks 0 <= 0) ok 5 - add_symbol doesn't leak (leaks 0 <= 0) not ok 6 - add_symbol doesn't leak (leaks 5 <= 0) # TODO the pure perl implementation leaks here somehow # Failed (TODO) test 'add_symbol doesn't leak (leaks 5 <= 0)' # at t/20-leaks.t line 71. # '5' # <= # '0' # leaked ARRAY(0x184edb0) from t/20-leaks.t line 67. # 66: $foo->add_symbol('$scalar_init' => 1); # 67: $foo->add_symbol('@array_init' => []); # 68: $foo->add_symbol('%hash_init' => {}); # SV = PVAV(0x18670a0) at 0x184edb0 # REFCNT = 1 # FLAGS = () # ARRAY = 0x0 # FILL = -1 # MAX = -1 # ARYLEN = 0x0 # FLAGS = (REAL) # leaked HASH(0x1869ec0) from t/20-leaks.t line 68. # 67: $foo->add_symbol('@array_init' => []); # 68: $foo->add_symbol('%hash_init' => {}); # 69: $foo->add_symbol('&code_init' => sub { "foo" }); # SV = PVHV(0x180a258) at 0x1869ec0 # REFCNT = 1 # FLAGS = (SHAREKEYS) # ARRAY = 0x0 # KEYS = 0 # FILL = 0 # MAX = 7 # RITER = -1 # EITER = 0x0 # leaked SCALAR(0x1869cc0) from /Users/fly1003/var/cpan/build/Package-Stash-0.20-8G1atM/blib/lib/Package/Stash/PP.pm line 85. # 84:sub add_symbol { # 85: my ($self, $variable, $initial_value, %opts) = @_; # 86: # SV = PVIV(0x1803e94) at 0x1869cc0 # REFCNT = 1 # FLAGS = (PADMY,IOK,pIOK) # IV = 1 # PV = 0 ok 7 - sub installed correctly ok 8 - code_init exists ok 9 - remove_symbol doesn't leak (leaks 0 <= 0) ok 10 - remove_glob doesn't leak (leaks 0 <= 0) ok 11 - has_symbol doesn't leak (leaks 0 <= 0) ok 12 - get_symbol doesn't leak (leaks 0 <= 0) ok 13 ok 14 ok 15 - get_or_add_symbol doesn't leak (leaks 0 <= 0) not ok 16 # TODO undef scalars aren't visible on 5.8, or from pure perl at all # Failed (TODO) test at t/20-leaks.t line 133. ok 17 ok 18 ok 19 ok 20 ok 21 - The class isa Exporter ok 22 - list_all_symbols doesn't leak (leaks 0 <= 0) ok 23 - get_all_symbols doesn't leak (leaks 0 <= 0) not ok 24 - get_symbol doesn't leak during glob expansion (leaks 1 <= 0) ok 25 - doesn't leak on errors (leaks 0 <= 0) 1..25 Dubious, test returned 1 (wstat 256, 0x100) Failed 1/25 subtests # Failed test 'get_symbol doesn't leak during glob expansion (leaks 1 <= 0)' # at t/21-leaks-debug.t line 182. # '1' # <= # '0' # leaked ARRAY(0x186af50) from /Users/fly1003/var/cpan/build/Package-Stash-0.20-8G1atM/blib/lib/Package/Stash/PP.pm line 114. # 113: no warnings 'redefine', 'misc', 'prototype'; # 114: *{$pkg . '::' . $name} = ref $initial_value ? $initial_value : \$initial_value; # 115:} # SV = PVAV(0x18671b8) at 0x186af50 # REFCNT = 1 # FLAGS = () # ARRAY = 0x61b100 # FILL = 0 # MAX = 3 # ARYLEN = 0x0 # FLAGS = () # Elt No. 0 # SV = 0 # Looks like you failed 1 test of 25. t/21-leaks-debug.t .............. ok 1 - object construction doesn't leak (leaks 0 <= 0) ok 2 - object construction doesn't leak, with an existing package (leaks 0 <= 0) ok 3 - object construction doesn't leak, with an existing package with things in it (leaks 0 <= 0) ok 4 - accessors don't leak (leaks 0 <= 0) ok 5 - add_symbol doesn't leak (leaks 0 <= 0) not ok 6 - add_symbol doesn't leak (leaks 5 <= 0) # TODO the pure perl implementation leaks here somehow # Failed (TODO) test 'add_symbol doesn't leak (leaks 5 <= 0)' # at t/21-leaks-debug.t line 73. # '5' # <= # '0' # leaked ARRAY(0x4a5df0) from t/21-leaks-debug.t line 71. # 70: $foo->add_symbol('%hash_init' => {}); # 71: $foo->add_symbol('&code_init' => sub { "foo" }); # 72: $foo->add_symbol('io_init' => Symbol::geniosym); # SV = PVAV(0x18671b8) at 0x4a5df0 # REFCNT = 1 # FLAGS = () # ARRAY = 0x6194b0 # FILL = -1 # MAX = 3 # ARYLEN = 0x0 # FLAGS = (REIFY) # leaked ARRAY(0x1850db0) from t/21-leaks-debug.t line 71. # 70: $foo->add_symbol('%hash_init' => {}); # 71: $foo->add_symbol('&code_init' => sub { "foo" }); # 72: $foo->add_symbol('io_init' => Symbol::geniosym); # SV = PVAV(0x18671a4) at 0x1850db0 # REFCNT = 1 # FLAGS = () # ARRAY = 0x619f50 # FILL = 1 # MAX = 3 # ARYLEN = 0x0 # FLAGS = (REAL) # Elt No. 0 # SV = PVAV(0x18671b8) at 0x4a5df0 # REFCNT = 1 # FLAGS = () # ARRAY = 0x6194b0 # FILL = -1 # MAX = 3 # ARYLEN = 0x0 # FLAGS = (REIFY) # Elt No. 1 # SV = PV(0x185cfc8) at 0x1865c20 # REFCNT = 2 # FLAGS = (PADTMP,POK,READONLY,pPOK) # PV = 0x603c10 "foo"\0 # CUR = 3 # LEN = 4 # leaked ARRAY(0x1821010) from t/21-leaks-debug.t line 71. # 70: $foo->add_symbol('%hash_init' => {}); # 71: $foo->add_symbol('&code_init' => sub { "foo" }); # 72: $foo->add_symbol('io_init' => Symbol::geniosym); # SV = PVAV(0x1867190) at 0x1821010 # REFCNT = 1 # FLAGS = () # ARRAY = 0x619b00 # FILL = 1 # MAX = 3 # ARYLEN = 0x0 # FLAGS = (REAL) # Elt No. 0 # Elt No. 1 # leaked ARRAY(0x186a680) from t/21-leaks-debug.t line 69. # 68: $foo->add_symbol('$scalar_init' => 1); # 69: $foo->add_symbol('@array_init' => []); # 70: $foo->add_symbol('%hash_init' => {}); # SV = PVAV(0x1866d44) at 0x186a680 # REFCNT = 1 # FLAGS = () # ARRAY = 0x0 # FILL = -1 # MAX = -1 # ARYLEN = 0x0 # FLAGS = (REAL) # leaked HASH(0x186a510) from t/21-leaks-debug.t line 70. # 69: $foo->add_symbol('@array_init' => []); # 70: $foo->add_symbol('%hash_init' => {}); # 71: $foo->add_symbol('&code_init' => sub { "foo" }); # SV = PVHV(0x180a26c) at 0x186a510 # REFCNT = 1 # FLAGS = (SHAREKEYS) # ARRAY = 0x0 # KEYS = 0 # FILL = 0 # MAX = 7 # RITER = -1 # EITER = 0x0 # leaked SCALAR(0x186a490) from /Users/fly1003/var/cpan/build/Package-Stash-0.20-8G1atM/blib/lib/Package/Stash/PP.pm line 85. # 84:sub add_symbol { # 85: my ($self, $variable, $initial_value, %opts) = @_; # 86: # SV = PVIV(0x1803eac) at 0x186a490 # REFCNT = 1 # FLAGS = (PADMY,IOK,pIOK) # IV = 1 # PV = 0 ok 7 - sub installed correctly ok 8 - code_init exists ok 9 - remove_symbol doesn't leak (leaks 0 <= 0) ok 10 - remove_glob doesn't leak (leaks 0 <= 0) ok 11 - has_symbol doesn't leak (leaks 0 <= 0) ok 12 - get_symbol doesn't leak (leaks 0 <= 0) ok 13 ok 14 ok 15 - get_or_add_symbol doesn't leak (leaks 0 <= 0) not ok 16 # TODO undef scalars aren't visible on 5.8, or from pure perl at all # Failed (TODO) test at t/21-leaks-debug.t line 135. ok 17 ok 18 ok 19 ok 20 ok 21 - The class isa Exporter ok 22 - list_all_symbols doesn't leak (leaks 0 <= 0) ok 23 - get_all_symbols doesn't leak (leaks 0 <= 0) not ok 24 - get_symbol doesn't leak during glob expansion (leaks 1 <= 0) ok 25 - doesn't leak on errors (leaks 0 <= 0) 1..25 Dubious, test returned 1 (wstat 256, 0x100) Failed 1/25 subtests t/impl-selection/01-choice.t .... ok 1 - autodetected properly: PP ok 2 - Package::Stash->can('new') 1..2 ok t/impl-selection/02-env.t ....... ok 1 - autodetected properly: PP ok 2 - Package::Stash->can('new') ok 3 # skip no XS ok 4 # skip no XS 1..4 ok t/impl-selection/03-var.t ....... ok 1 - autodetected properly: PP ok 2 - Package::Stash->can('new') ok 3 # skip no XS ok 4 # skip no XS 1..4 ok t/impl-selection/10-basic-pp.t .. ok 1 - loaded PP ok 2 - didn't load XS ok 3 - ... can't call name() as a class method ok 4 - ... the %foo slot has not been created yet ok 5 - ... the object agrees ok 6 - ... checking doesn' vivify ok 7 - ... created %Foo::foo successfully ok 8 - ... SCALAR shouldnt have been created too ok 9 - ... ARRAY shouldnt have been created too ok 10 - ... CODE shouldnt have been created too ok 11 - ... the %foo slot was created successfully ok 12 - ... the meta agrees ok 13 - ... our %foo was initialized correctly ok 14 - ... our %foo was initialized correctly ok 15 - ... got the right package variable back ok 16 - ... our %foo is the same as the metas ok 17 - ... our %foo was updated correctly ok 18 - ... our %foo was updated correctly ok 19 - ... the @bar slot has not been created yet ok 20 - ... created @Foo::bar successfully ok 21 - ... the @bar slot was created successfully ok 22 - ... the meta agrees ok 23 - ... SCALAR shouldnt have been created too ok 24 - ... HASH shouldnt have been created too ok 25 - ... CODE shouldnt have been created too ok 26 - ... our @bar was initialized correctly ok 27 - ... our @bar was initialized correctly ok 28 - ... the $baz slot has not been created yet ok 29 - ... created $Foo::baz successfully ok 30 - ... the $baz slot was created successfully ok 31 - ... the meta agrees ok 32 - ... ARRAY shouldnt have been created too ok 33 - ... HASH shouldnt have been created too ok 34 - ... CODE shouldnt have been created too ok 35 - ... got the right value back ok 36 - ... our $baz was assigned to correctly ok 37 - ... the meta agrees ok 38 - ... the &funk slot has not been created yet ok 39 - ... created &Foo::funk successfully ok 40 - ... the &funk slot was created successfully ok 41 - ... the meta agrees ok 42 - ... SCALAR shouldnt have been created too ok 43 - ... ARRAY shouldnt have been created too ok 44 - ... HASH shouldnt have been created too ok 45 - ... our &funk exists ok 46 - ... got the right value from the function ok 47 - ... created @Foo::foo successfully ok 48 - ... the @foo slot was added successfully ok 49 - ... got the right values for @Foo::foo ok 50 - ... created &Foo::foo successfully ok 51 - ... the meta agrees ok 52 - ... got the right value for &Foo::foo ok 53 - ... created $Foo::foo successfully ok 54 - ... the meta agrees ok 55 - ... got the right scalar value back ok 56 - ... got the right value from the scalar ok 57 - ... removed %Foo::foo successfully ok 58 - ... the %foo slot was removed successfully ok 59 - ... the @foo slot still exists ok 60 - ... the &foo slot still exists ok 61 - ... the $foo slot still exists ok 62 - ... got the right values for @Foo::foo ok 63 - ... got the right value for &Foo::foo ok 64 - ... got the right value for $Foo::foo ok 65 - ... the %foo slot has been removed successfully ok 66 - ... the @foo slot has NOT been removed ok 67 - ... the &foo slot has NOT been removed ok 68 - ... the $foo slot has NOT been removed ok 69 - ... removed &Foo::foo successfully ok 70 - ... the &foo slot no longer exists ok 71 - ... the @foo slot still exists ok 72 - ... the $foo slot still exists ok 73 - ... got the right values for @Foo::foo ok 74 - ... got the right value for $Foo::foo ok 75 - ... the %foo slot has been removed successfully ok 76 - ... the &foo slot has now been removed ok 77 - ... the @foo slot has NOT been removed ok 78 - ... the $foo slot has NOT been removed ok 79 - ... removed $Foo::foo successfully ok 80 - ... the $foo slot no longer exists ok 81 - ... the @foo slot still exists ok 82 - ... got the right values for @Foo::foo ok 83 - ... the %foo slot has been removed successfully ok 84 - ... the &foo slot has now been removed ok 85 - ... the $foo slot has now been removed ok 86 - ... the @foo slot has NOT been removed ok 87 - ... the fetched symbols are the same as the listed ones ok 88 - ... the fetched symbols are the same as the listed ones ok 89 - ... got the right symbol ok 90 - ... got the right symbol ok 91 - ... the fetched symbols are the same as the listed ones ok 92 - ... got the right symbol ok 93 - got the right ones ok 94 - can't initialize a slot with the wrong type of value ok 95 - can't initialize a slot with the wrong type of value ok 96 - can't initialize a slot with the wrong type of value ok 97 - can't initialize a slot with the wrong type of value ok 98 - got $foo ok 99 - got @foo ok 100 - got %foo ok 101 - got &foo ok 102 - got foo ok 103 - got expected value for $foo ok 104 - got expected value for %foo ok 105 - got expected value for &foo ok 106 - got expected value for @foo ok 107 - got expected value for foo ok 108 - got expected value for $foo ok 109 - got expected value for %bar ok 110 - got expected value for %foo ok 111 - got expected value for &foo ok 112 - got expected value for @foo ok 113 - got expected value for foo ok 114 - got expected value for $foo ok 115 - got expected value for %bar ok 116 - got expected value for %foo ok 117 - got expected value for &foo ok 118 - got expected value for @foo ok 119 - got expected value for foo ok 120 - list_all_symbols not ok 121 - list_all_symbols SCALAR # TODO undef scalars aren't visible on 5.8, or from pure perl at all # Failed (TODO) test 'list_all_symbols SCALAR' # at t/impl-selection/10-basic-pp.t line 401. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = 'foo' ok 122 - list_all_symbols ARRAY ok 123 - list_all_symbols HASH ok 124 - list_all_symbols CODE 1..124 ok t/impl-selection/11-basic-xs.t .. skipped: Test requires module 'Package::Stash::XS' but it's not found t/release-eol.t ................. skipped: these tests are for release candidate testing t/release-no-tabs.t ............. skipped: these tests are for release candidate testing t/release-pod-coverage.t ........ skipped: these tests are for release candidate testing t/release-pod-syntax.t .......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/20-leaks.t (Wstat: 256 Tests: 25 Failed: 1) Failed test: 24 Non-zero exit status: 1 t/21-leaks-debug.t (Wstat: 256 Tests: 25 Failed: 1) Failed test: 24 Non-zero exit status: 1 Files=20, Tests=394, 4 wallclock secs ( 0.40 usr 0.31 sys + 2.37 cusr 0.75 csys = 3.83 CPU) Result: FAIL Failed 2/20 test programs. 2/394 subtests failed. make: *** [test_dynamic] Error 255 DOY/Package-Stash-0.20.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports DOY/Package-Stash-0.20.tar.gz Finished 2011-01-04T06:05:20