Start 2008-10-18T09:10:22 Going to read /Users/fly1003/var/cpan/Metadata Database was generated on Sat, 18 Oct 2008 10:26:50 GMT Running make for F/FA/FAYLAND/WWW-Contact-0.03.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/F/FA/FAYLAND/WWW-Contact-0.03.tar.gz Checksum for /Users/fly1003/var/cpan/sources/authors/id/F/FA/FAYLAND/WWW-Contact-0.03.tar.gz ok WWW-Contact-0.03/ WWW-Contact-0.03/Changes WWW-Contact-0.03/lib/ WWW-Contact-0.03/lib/WWW/ WWW-Contact-0.03/lib/WWW/Contact.pm WWW-Contact-0.03/lib/WWW/Contact/ WWW-Contact-0.03/lib/WWW/Contact/Gmail.pm WWW-Contact-0.03/lib/WWW/Contact/Base.pm WWW-Contact-0.03/lib/WWW/Contact/Yahoo.pm WWW-Contact-0.03/Makefile.PL WWW-Contact-0.03/Build.PL WWW-Contact-0.03/t/ WWW-Contact-0.03/t/lib/ WWW-Contact-0.03/t/lib/WWW/ WWW-Contact-0.03/t/lib/WWW/Contact/ WWW-Contact-0.03/t/lib/WWW/Contact/Unknown.pm WWW-Contact-0.03/t/102-yahoo.t WWW-Contact-0.03/t/101-gmail.t WWW-Contact-0.03/t/00-load.t WWW-Contact-0.03/t/pod.t WWW-Contact-0.03/t/01-basic.t WWW-Contact-0.03/MANIFEST WWW-Contact-0.03/META.yml WWW-Contact-0.03/README CPAN.pm: Going to build F/FA/FAYLAND/WWW-Contact-0.03.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL Warning: prerequisite HTML::TokeParser::Simple 0 not found. Checking if your kit is complete... Looks good Warning: prerequisite WWW::Mechanize::GZip 0 not found. Writing Makefile for WWW::Contact ---- Unsatisfied dependencies detected during ---- ---- FAYLAND/WWW-Contact-0.03.tar.gz ---- HTML::TokeParser::Simple [requires] WWW::Mechanize::GZip [requires] Running make test Delayed until after prerequisites Running test for module 'HTML::TokeParser::Simple' Running make for O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz Checksum for /Users/fly1003/var/cpan/sources/authors/id/O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz ok HTML-TokeParser-Simple-3.15/ HTML-TokeParser-Simple-3.15/Build.PL HTML-TokeParser-Simple-3.15/Changes HTML-TokeParser-Simple-3.15/lib/ HTML-TokeParser-Simple-3.15/lib/HTML/ HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/ HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/ HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/ HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Comment.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Declaration.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/ProcessInstruction.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Tag/ HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Tag/End.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Tag/Start.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Tag.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token/Text.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple/Token.pm HTML-TokeParser-Simple-3.15/lib/HTML/TokeParser/Simple.pm HTML-TokeParser-Simple-3.15/Makefile.PL HTML-TokeParser-Simple-3.15/MANIFEST HTML-TokeParser-Simple-3.15/META.yml HTML-TokeParser-Simple-3.15/README HTML-TokeParser-Simple-3.15/t/ HTML-TokeParser-Simple-3.15/t/01get_tag.t HTML-TokeParser-Simple-3.15/t/01get_token.t HTML-TokeParser-Simple-3.15/t/02munge_html.t HTML-TokeParser-Simple-3.15/t/03constructor.t HTML-TokeParser-Simple-3.15/t/04internals.t HTML-TokeParser-Simple-3.15/t/data/ HTML-TokeParser-Simple-3.15/t/data/test.html HTML-TokeParser-Simple-3.15/t/pod-coverage.t HTML-TokeParser-Simple-3.15/t/pod.t CPAN.pm: Going to build O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL Warning: prerequisite Sub::Override 0 not found. Checking if your kit is complete... Looks good Writing Makefile for HTML::TokeParser::Simple ---- Unsatisfied dependencies detected during ---- ---- OVID/HTML-TokeParser-Simple-3.15.tar.gz ---- Sub::Override [requires] Running make test Delayed until after prerequisites Running test for module 'Sub::Override' Running make for O/OV/OVID/Sub-Override-0.08.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/O/OV/OVID/Sub-Override-0.08.tar.gz Checksum for /Users/fly1003/var/cpan/sources/authors/id/O/OV/OVID/Sub-Override-0.08.tar.gz ok Sub-Override-0.08/ Sub-Override-0.08/Changes Sub-Override-0.08/lib/ Sub-Override-0.08/lib/Sub/ Sub-Override-0.08/lib/Sub/Override.pm Sub-Override-0.08/Makefile.PL Sub-Override-0.08/MANIFEST Sub-Override-0.08/META.yml Sub-Override-0.08/README Sub-Override-0.08/t/ Sub-Override-0.08/t/10override.t Sub-Override-0.08/t/pod-coverage.t Sub-Override-0.08/t/pod.t CPAN.pm: Going to build O/OV/OVID/Sub-Override-0.08.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Sub::Override >>> make cp lib/Sub/Override.pm blib/lib/Sub/Override.pm Manifying blib/man3/Sub::Override.3 OVID/Sub-Override-0.08.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/10override...... 1..28 ok 1 - use Sub::Override; ok 2 - Sub::Override->can('new') ok 3 - ... and the object it returns isa Sub::Override ok 4 - Sub::Override->can('replace') ok 5 - ... and we can't replace a sub which doesn't exist ok 6 - ... and only a code reference may replace a subroutine ok 7 - ... and replacing a subroutine should succeed ok 8 - ... and the subroutine should exhibit the new behavior ok 9 - ... and we should be able to replace a sub more than once ok 10 - ... and still have the sub exhibit the new behavior ok 11 - Sub::Override->can('override') ok 12 - ... and it should also replace a subroutine ok 13 - ... and act just like replace() ok 14 - Sub::Override->can('restore') ok 15 - ... and it should fail if the subroutine had not been replaced ok 16 - ... and the subroutine should exhibit the original behavior ok 17 - ... but we should not be able to restore it twice ok 18 - A new override object should be able to replace a subroutine ok 19 - ... and the subroutine should exhibit the new behavior ok 20 - ... but should revert to the original behavior when the object falls out of scope ok 21 - We should be able to override a sub from the constructor ok 22 - ... and the subroutine should exhibit the new behavior ok 23 - ... and we do not need an argument to restore if only one sub is overridden ok 24 - ... and the subroutine should exhibit its original behavior ok 25 - ... but we must explicitly provide the sub name if more than one was replaced ok 26 - Not fully qualifying a sub name will assume the current package ok 27 - ... and we should be able to restore said sub ok 28 - ... even if we use a full qualified sub name ok t/pod-coverage.... 1..1 ok 1 - Pod coverage on Sub::Override ok t/pod............. 1..1 ok 1 - blib/lib/Sub/Override.pm ok All tests successful. Files=3, Tests=30, 1 wallclock secs ( 0.07 usr 0.05 sys + 0.35 cusr 0.10 csys = 0.57 CPU) Result: PASS OVID/Sub-Override-0.08.tar.gz make test TEST_VERBOSE=1 -- OK Picked up abstract from Makefile Curtis 'Ovid' Poe <ovid@cpan.org> Perl extension for easily overriding subroutines >>> (cd /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt && tar cvf - Sub-Override-0.08.ppd blib) | gzip -c >/Users/fly1003/var/REPO/O/OV/OVID/Sub-Override-0.08.tar.gz Sub-Override-0.08.ppd blib/ blib/lib/ blib/lib/Sub/ blib/lib/Sub/Override.pm blib/man3/ blib/man3/Sub::Override.3 >>> mv /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/Sub-Override-0.08.ppd /Users/fly1003/var/REPO/O/OV/OVID Running make for O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz Prepending /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE Prepending /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz >>> make cp lib/HTML/TokeParser/Simple/Token/Declaration.pm blib/lib/HTML/TokeParser/Simple/Token/Declaration.pm cp lib/HTML/TokeParser/Simple/Token/Tag.pm blib/lib/HTML/TokeParser/Simple/Token/Tag.pm cp lib/HTML/TokeParser/Simple/Token/Tag/End.pm blib/lib/HTML/TokeParser/Simple/Token/Tag/End.pm cp lib/HTML/TokeParser/Simple.pm blib/lib/HTML/TokeParser/Simple.pm cp lib/HTML/TokeParser/Simple/Token/Comment.pm blib/lib/HTML/TokeParser/Simple/Token/Comment.pm cp lib/HTML/TokeParser/Simple/Token/Text.pm blib/lib/HTML/TokeParser/Simple/Token/Text.pm cp lib/HTML/TokeParser/Simple/Token.pm blib/lib/HTML/TokeParser/Simple/Token.pm cp lib/HTML/TokeParser/Simple/Token/ProcessInstruction.pm blib/lib/HTML/TokeParser/Simple/Token/ProcessInstruction.pm cp lib/HTML/TokeParser/Simple/Token/Tag/Start.pm blib/lib/HTML/TokeParser/Simple/Token/Tag/Start.pm Manifying blib/man3/HTML::TokeParser::Simple::Token::Tag.3 Manifying blib/man3/HTML::TokeParser::Simple::Token::Declaration.3 Manifying blib/man3/HTML::TokeParser::Simple::Token::Tag::End.3 Manifying blib/man3/HTML::TokeParser::Simple::Token::Comment.3 Manifying blib/man3/HTML::TokeParser::Simple.3 Manifying blib/man3/HTML::TokeParser::Simple::Token::Text.3 Manifying blib/man3/HTML::TokeParser::Simple::Token.3 Manifying blib/man3/HTML::TokeParser::Simple::Token::ProcessInstruction.3 Manifying blib/man3/HTML::TokeParser::Simple::Token::Tag::Start.3 OVID/HTML-TokeParser-Simple-3.15.tar.gz make -- OK Prepending /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01get_tag........ 1..59 ok 1 - use HTML::TokeParser::Simple; ok 2 - HTML::TokeParser::Simple->can('new') ok 3 - ... and the object it returns isa HTML::TokeParser::Simple ok 4 - HTML::TokeParser::Simple->can('get_tag') ok 5 - ... and the object it returns isa HTML::TokeParser::Simple::Token::Tag ok 6 - HTML::TokeParser::Simple::Token::Tag::Start->can('is_declaration') ok 7 - ... and it should return false ok 8 - ... and the token should not be changed ok 9 - HTML::TokeParser::Simple::Token::Tag::Start->can('is_start_tag') ok 10 - ... and it should correctly identify a given start tag ok 11 - ... bug it shouldn't give false positives ok 12 - ... and it should correctly identify a start tag ok 13 - HTML::TokeParser::Simple::Token::Tag::Start->can('is_tag') ok 14 - ... and it should identify a token as a given tag ok 15 - ... and it shouldn't give false positives ok 16 - ... and it should identify that the token is a tag ok 17 - HTML::TokeParser::Simple::Token::Tag::Start->can('get_tag') ok 18 - ... and calling it should succeed ok 19 - ... by returning the correct tag ok 20 - HTML::TokeParser::Simple::Token::Tag::Start->can('return_tag') ok 21 - ... and calling this deprecated method should succeed ok 22 - ... by returning the correct tag ok 23 - HTML::TokeParser::Simple::Token::Tag::Start->can('is_comment') ok 24 - ... but it shouldn't have false positives ok 25 - HTML::TokeParser::Simple::Token::Tag::Start->can('return_text') ok 26 - ... and it should return the correct text ok 27 - ... while issuing a warning ok 28 - ... with an appropriate error message ok 29 - HTML::TokeParser::Simple::Token::Tag::Start->can('as_is') ok 30 - ... and it should return the correct text ok 31 - HTML::TokeParser::Simple::Token::Tag::End->can('is_end_tag') ok 32 - ... and it should identify a particular end tag ok 33 - ... even without a slash ok 34 - ... regardless of case ok 35 - ... and should identify the token as just being an end tag ok 36 - HTML::TokeParser::Simple::Token::Tag::Start->can('get_attr') ok 37 - ... and it should return a hashref ok 38 - ... correctly identifying the bgcolor ok 39 - ... and the alink color ok 40 - ... and fetching a specific attribute should succeed ok 41 - ... and fetching a specific attribute should succeed ok 42 - ... and fetching a specific attribute should succeed ok 43 - HTML::TokeParser::Simple::Token::Tag::Start->can('return_attr') ok 44 - ... and calling this deprecated method should return a hashref ok 45 - ... correctly identifying the bgcolor ok 46 - ... and the alink color ok 47 - ... and fetching a specific attribute should succeed ok 48 - ... and fetching a specific attribute should succeed ok 49 - ... and fetching a specific attribute should succeed ok 50 - HTML::TokeParser::Simple::Token::Tag::Start->can('set_attr') ok 51 - set_attr() should accept what get_attr() returns ok 52 - HTML::TokeParser::Simple::Token::Tag::Start->can('get_attrseq') ok 53 - ... and it should return an array reference ok 54 - ... with the correct number of elements ok 55 - ... in the correct order ok 56 - HTML::TokeParser::Simple::Token::Tag::Start->can('return_attrseq') ok 57 - ... and calling this deprecated method should return an array reference ok 58 - ... with the correct number of elements ok 59 - ... in the correct order ok t/01get_token...... 1..56 ok 1 - use HTML::TokeParser::Simple; ok 2 - HTML::TokeParser::Simple->can('new') ok 3 - ... and the return value isa HTML::TokeParser::Simple ok 4 - HTML::TokeParser::Simple->can('get_token') ok 5 - ... and the return value isa HTML::TokeParser::Simple::Token ok 6 - HTML::TokeParser::Simple::Token::Declaration->can('is_declaration') ok 7 - ... and it should correctly identify one ok 8 - HTML::TokeParser::Simple::Token::Tag::Start->can('is_start_tag') ok 9 - ... and it should identify the token as a particular start tag ok 10 - ... or as a start tag in general ok 11 - ... but it should not return false positives ok 12 - HTML::TokeParser::Simple::Token::Tag::Start->can('get_tag') ok 13 - ... and it should return the correct tag ok 14 - HTML::TokeParser::Simple::Token::Tag::Start->can('return_tag') ok 15 - ... and calling this deprecated method should return the correct tag ok 16 - HTML::TokeParser::Simple->can('peek') ok 17 - ... and calling it should not change the state of the parser ok 18 - ... even if we try to peek beyond the end of the document ok 19 - Calling peek without arguments should return the next token ok 20 - ... and passing an integer value should return the next X tokens ok 21 - ... but passing it a non-integer value should croak ok 22 - HTML::TokeParser::Simple::Token::Comment->can('is_comment') ok 23 - ... and it should correctly identify a comment ok 24 - HTML::TokeParser::Simple::Token::Comment->can('return_text') ok 25 - ... and it should return the correct text ok 26 - ... while issuing a warning ok 27 - ... with an appropriate error message ok 28 - HTML::TokeParser::Simple::Token::Comment->can('as_is') ok 29 - ... and it should return the correct text ok 30 - HTML::TokeParser::Simple::Token::Text->can('is_text') ok 31 - ... and it should correctly identify text ok 32 - HTML::TokeParser::Simple::Token::Tag::End->can('is_end_tag') ok 33 - ... and it should identify a particular end tag ok 34 - ... even without a slash ok 35 - ... regardless of case ok 36 - ... and should identify the token as just being an end tag ok 37 - HTML::TokeParser::Simple::Token::ProcessInstruction->can('is_pi') ok 38 - ... and it should correctly identify them ok 39 - HTML::TokeParser::Simple::Token::ProcessInstruction->can('is_process_instruction') ok 40 - ... and it should correctly identify them ok 41 - HTML::TokeParser::Simple::Token::ProcessInstruction->can('get_token0') ok 42 - ... and it should return something ok 43 - HTML::TokeParser::Simple::Token::ProcessInstruction->can('return_token0') ok 44 - ... and calling this deprecated method should return something ok 45 - HTML::TokeParser::Simple::Token::Tag::Start->can('get_attr') ok 46 - ... and it should return a hashref ok 47 - ... correctly identifying the bgcolor ok 48 - ... and the alink color ok 49 - HTML::TokeParser::Simple::Token::Tag::Start->can('get_attrseq') ok 50 - ... and it should return an array reference ok 51 - ... with the correct number of elements ok 52 - ... in the correct order ok 53 - HTML::TokeParser::Simple::Token::Tag::Start->can('return_attrseq') ok 54 - ... and calling this deprecated method should return an array reference ok 55 - ... with the correct number of elements ok 56 - ... in the correct order ok t/02munge_html..... 1..24 ok 1 - use HTML::TokeParser::Simple; ok 2 - HTML::TokeParser::Simple::Token::Tag::End->can('set_attr') ok 3 - HTML::TokeParser::Simple::Token::Tag::Start->can('set_attr') ok 4 - ... but a good token should set the new attribute ok 5 - ... or overwrite an existing one ok 6 - ... and the attribute sequence should be updated ok 7 - ... as should the attributes themselves ok 8 - HTML::TokeParser::Simple::Token::Tag::Start->can('delete_attr') ok 9 - ... and deleting a non-existent attribute should be a no-op ok 10 - ... and deleting an existing one should succeed ok 11 - ... and deleting should be case-insensitive ok 12 - Calling is_tag() with a regex should succeed ok 13 - ... and not return false positives ok 14 - Calling is_start_tag() with a regex should succeed ok 15 - ... and not return false positives ok 16 - Setting attributes on self-closing tags should succeed ok 17 - ... as should deleting them ok 18 - Setting attributes on self-closing tags should succeed ok 19 - ... as should deleting them ok 20 - HTML::TokeParser::Simple::Token::Tag::Start->can('rewrite_tag') ok 21 - ... and it should correctly rewrite all tags ok 22 - We should be able to fetch tags with escaped attributes ok 23 - ... and rewriting said tags should succeed ok 24 - ... and the attributes should be properly escaped ok t/03constructor.... 1..15 ok 1 - use HTML::TokeParser::Simple; ok 2 - HTML::TokeParser::Simple->can('new') ok 3 - ... and calling it with an unknown source type should croak() ok 4 - ... we should be able to specify a filename with the constructor ok 5 - The object isa HTML::TokeParser::Simple ok 6 - ... and it should be able to parse the file ok 7 - ... we should be able to specify a filehandle with the constructor ok 8 - The object isa HTML::TokeParser::Simple ok 9 - ... and it should be able to parse the file ok 10 - ... we should be able to specify a string with the constructor ok 11 - The object isa HTML::TokeParser::Simple ok 12 - ... and it should be able to parse the file ok 13 - ... we should be able to specify a URL with the constructor ok 14 - ... and it should be able to parse the file ok 15 - ... but the URL constructor should croak if we cannot fetch the content ok t/04internals...... 1..16 ok 1 - use HTML::TokeParser::Simple; ok 2 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_text') ok 3 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_text') ok 4 - ... and _get_text should return the same value regardless of source ok 5 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_attrseq') ok 6 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_attrseq') ok 7 - ... and _get_attrseq should return the same value regardless of source ok 8 - ... and it should match the correct attribute sequence ok 9 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_attr') ok 10 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_attr') ok 11 - ... and _get_attr should return the same value regardless of source ok 12 - ... and it should match the correct attributes ok 13 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_tag') ok 14 - HTML::TokeParser::Simple::Token::Tag::Start->can('_get_tag') ok 15 - ... and _get_tag should return the same value regardless of source ok 16 - ... and it should match the correct tag ok t/pod-coverage..... 1..9 ok 1 - Pod coverage on HTML::TokeParser::Simple ok 2 - Pod coverage on HTML::TokeParser::Simple::Token ok 3 - Pod coverage on HTML::TokeParser::Simple::Token::Comment ok 4 - Pod coverage on HTML::TokeParser::Simple::Token::Declaration ok 5 - Pod coverage on HTML::TokeParser::Simple::Token::ProcessInstruction ok 6 - Pod coverage on HTML::TokeParser::Simple::Token::Tag ok 7 - Pod coverage on HTML::TokeParser::Simple::Token::Text ok 8 - Pod coverage on HTML::TokeParser::Simple::Token::Tag::End ok 9 - Pod coverage on HTML::TokeParser::Simple::Token::Tag::Start ok t/pod.............. 1..9 ok 1 - blib/lib/HTML/TokeParser/Simple.pm ok 2 - blib/lib/HTML/TokeParser/Simple/Token.pm ok 3 - blib/lib/HTML/TokeParser/Simple/Token/Comment.pm ok 4 - blib/lib/HTML/TokeParser/Simple/Token/Declaration.pm ok 5 - blib/lib/HTML/TokeParser/Simple/Token/ProcessInstruction.pm ok 6 - blib/lib/HTML/TokeParser/Simple/Token/Tag.pm ok 7 - blib/lib/HTML/TokeParser/Simple/Token/Text.pm ok 8 - blib/lib/HTML/TokeParser/Simple/Token/Tag/End.pm ok 9 - blib/lib/HTML/TokeParser/Simple/Token/Tag/Start.pm ok All tests successful. Files=7, Tests=188, 1 wallclock secs ( 0.19 usr 0.10 sys + 1.03 cusr 0.26 csys = 1.58 CPU) Result: PASS OVID/HTML-TokeParser-Simple-3.15.tar.gz make test TEST_VERBOSE=1 -- OK Curtis 'Ovid' Poe <ovid@cpan.org> Easy to use C<HTML::TokeParser> interface >>> (cd /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE && tar cvf - HTML-TokeParser-Simple-3.15.ppd blib) | gzip -c >/Users/fly1003/var/REPO/O/OV/OVID/HTML-TokeParser-Simple-3.15.tar.gz HTML-TokeParser-Simple-3.15.ppd blib/ blib/lib/ blib/lib/HTML/ blib/lib/HTML/TokeParser/ blib/lib/HTML/TokeParser/Simple/ blib/lib/HTML/TokeParser/Simple/Token/ blib/lib/HTML/TokeParser/Simple/Token/Comment.pm blib/lib/HTML/TokeParser/Simple/Token/Declaration.pm blib/lib/HTML/TokeParser/Simple/Token/ProcessInstruction.pm blib/lib/HTML/TokeParser/Simple/Token/Tag/ blib/lib/HTML/TokeParser/Simple/Token/Tag/End.pm blib/lib/HTML/TokeParser/Simple/Token/Tag/Start.pm blib/lib/HTML/TokeParser/Simple/Token/Tag.pm blib/lib/HTML/TokeParser/Simple/Token/Text.pm blib/lib/HTML/TokeParser/Simple/Token.pm blib/lib/HTML/TokeParser/Simple.pm blib/man3/ blib/man3/HTML::TokeParser::Simple.3 blib/man3/HTML::TokeParser::Simple::Token.3 blib/man3/HTML::TokeParser::Simple::Token::Comment.3 blib/man3/HTML::TokeParser::Simple::Token::Declaration.3 blib/man3/HTML::TokeParser::Simple::Token::ProcessInstruction.3 blib/man3/HTML::TokeParser::Simple::Token::Tag.3 blib/man3/HTML::TokeParser::Simple::Token::Tag::End.3 blib/man3/HTML::TokeParser::Simple::Token::Tag::Start.3 blib/man3/HTML::TokeParser::Simple::Token::Text.3 >>> mv /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/HTML-TokeParser-Simple-3.15.ppd /Users/fly1003/var/REPO/O/OV/OVID Running test for module 'WWW::Mechanize::GZip' Running make for P/PE/PEGI/WWW-Mechanize-GZip-0.10.tar.gz Prepending /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'get' Fetching with LWP: http://cpan.nas.activestate.com/authors/id/P/PE/PEGI/WWW-Mechanize-GZip-0.10.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/P/PE/PEGI/CHECKSUMS Checksum for /Users/fly1003/var/cpan/sources/authors/id/P/PE/PEGI/WWW-Mechanize-GZip-0.10.tar.gz ok WWW-Mechanize-GZip-0.10/ WWW-Mechanize-GZip-0.10/t/ WWW-Mechanize-GZip-0.10/t/boilerplate.t WWW-Mechanize-GZip-0.10/t/pod-coverage.t WWW-Mechanize-GZip-0.10/t/00-load.t WWW-Mechanize-GZip-0.10/t/pod.t WWW-Mechanize-GZip-0.10/META.yml WWW-Mechanize-GZip-0.10/Changes WWW-Mechanize-GZip-0.10/lib/ WWW-Mechanize-GZip-0.10/lib/WWW/ WWW-Mechanize-GZip-0.10/lib/WWW/Mechanize/ WWW-Mechanize-GZip-0.10/lib/WWW/Mechanize/GZip.pm WWW-Mechanize-GZip-0.10/MANIFEST WWW-Mechanize-GZip-0.10/Makefile.PL WWW-Mechanize-GZip-0.10/README Prepending /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build P/PE/PEGI/WWW-Mechanize-GZip-0.10.tar.gz >>> /Users/fly1003/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for WWW::Mechanize::GZip >>> make cp lib/WWW/Mechanize/GZip.pm blib/lib/WWW/Mechanize/GZip.pm Manifying blib/man3/WWW::Mechanize::GZip.3 PEGI/WWW-Mechanize-GZip-0.10.tar.gz make -- OK Prepending /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... 1..1 ok 1 - use WWW::Mechanize::GZip; # Testing WWW::Mechanize::GZip 0.10, Perl 5.010000, /Users/fly1003/bin/perl ok t/boilerplate..... 1..3 ok 1 - README contains no boilerplate text ok 2 - Changes contains no boilerplate text ok 3 - lib/WWW/Mechanize/GZip.pm contains no boilerplate text ok t/pod-coverage.... 1..1 not ok 1 - Pod coverage on WWW::Mechanize::GZip # Failed test 'Pod coverage on WWW::Mechanize::GZip' # at /Users/fly1003/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for WWW::Mechanize::GZip is 0.0%, with 2 naked subroutines: # prepare_request # send_request # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod............. 1..1 ok 1 - blib/lib/WWW/Mechanize/GZip.pm ok Test Summary Report ------------------- t/pod-coverage (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=6, 1 wallclock secs ( 0.08 usr 0.07 sys + 0.92 cusr 0.25 csys = 1.32 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 PEGI/WWW-Mechanize-GZip-0.10.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PEGI/WWW-Mechanize-GZip-0.10.tar.gz Running make for F/FA/FAYLAND/WWW-Contact-0.03.tar.gz Prepending /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /Users/fly1003/var/cpan/build/WWW-Contact-0.03-BGBYQr Prepending /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build F/FA/FAYLAND/WWW-Contact-0.03.tar.gz Warning: Prerequisite 'WWW::Mechanize::GZip => 0' for 'FAYLAND/WWW-Contact-0.03.tar.gz' failed when processing 'PEGI/WWW-Mechanize-GZip-0.10.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/WWW/Contact/Base.pm blib/lib/WWW/Contact/Base.pm cp lib/WWW/Contact.pm blib/lib/WWW/Contact.pm cp lib/WWW/Contact/Gmail.pm blib/lib/WWW/Contact/Gmail.pm cp lib/WWW/Contact/Yahoo.pm blib/lib/WWW/Contact/Yahoo.pm Manifying blib/man3/WWW::Contact::Base.3 Manifying blib/man3/WWW::Contact::Yahoo.3 Manifying blib/man3/WWW::Contact::Gmail.3 Manifying blib/man3/WWW::Contact.3 FAYLAND/WWW-Contact-0.03.tar.gz make -- OK Prepending /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load...... 1..1 ok 1 - use WWW::Contact; # Testing WWW::Contact 0.03, Perl 5.010000, /Users/fly1003/bin/perl ok t/01-basic..... 1..8 ok 1 - get error with password b ok 2 - empty contact list ok 3 - no error with password c ok 4 - get 2 contact list ok 5 - get error with password b ok 6 - empty contact list ok 7 - no error with password c ok 8 - get 2 contact list ok t/101-gmail.... 1..4 ok 1 - get error with wrong password ok 2 - empty contact list ok 3 # SKIP set ENV TEST_GMAIL and TEST_GMAIL_PASS to test real ok 4 # SKIP set ENV TEST_GMAIL and TEST_GMAIL_PASS to test real ok t/102-yahoo.... 1..4 Can't locate WWW/Mechanize/GZip.pm in @INC (@INC contains: /Users/fly1003/var/cpan/build/WWW-Contact-0.03-BGBYQr/t/lib /Users/fly1003/var/cpan/build/WWW-Contact-0.03-BGBYQr/blib/lib /Users/fly1003/var/cpan/build/WWW-Contact-0.03-BGBYQr/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/arch /Users/fly1003/var/cpan/build/HTML-TokeParser-Simple-3.15-YDzDlE/blib/lib /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/arch /Users/fly1003/var/cpan/build/Sub-Override-0.08-ilvnmt/blib/lib /Users/fly1003/var/megalib /Users/fly1003/Library/ActivePerl-5.10/lib /Users/fly1003/ap1003/site/lib /Users/fly1003/ap1003/lib .) at (eval 208) line 2. BEGIN failed--compilation aborted at (eval 208) line 2. at /Users/fly1003/var/megalib/Class/MOP/Attribute.pm line 249 # Looks like your test exited with 2 before it could output anything. Dubious, test returned 2 (wstat 512, 0x200) Failed 4/4 subtests t/pod.......... 1..4 ok 1 - blib/lib/WWW/Contact.pm ok 2 - blib/lib/WWW/Contact/Base.pm ok 3 - blib/lib/WWW/Contact/Gmail.pm ok 4 - blib/lib/WWW/Contact/Yahoo.pm ok Test Summary Report ------------------- t/102-yahoo (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 4 tests but ran 0. Files=5, Tests=17, 5 wallclock secs ( 0.09 usr 0.09 sys + 3.15 cusr 0.65 csys = 3.98 CPU) Result: FAIL Failed 1/5 test programs. 0/17 subtests failed. make: *** [test_dynamic] Error 255 FAYLAND/WWW-Contact-0.03.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports FAYLAND/WWW-Contact-0.03.tar.gz Finished 2008-10-18T09:10:47