Start 2009-03-29T06:06:28
ActivePerl-1003 CPAN-1.9351
Going to read '/Users/fly1003/var/cpan/Metadata'
  Database was generated on Sun, 29 Mar 2009 10:26:58 GMT
Running make for M/MS/MSCHILLI/X10-Home-0.04.tar.gz
Fetching with LWP:
  http://cpan.nas.activestate.com/authors/id/M/MS/MSCHILLI/X10-Home-0.04.tar.gz
Checksum for /Users/fly1003/var/cpan/sources/authors/id/M/MS/MSCHILLI/X10-Home-0.04.tar.gz ok
X10-Home-0.04/
X10-Home-0.04/eg/
X10-Home-0.04/eg/x10.js
X10-Home-0.04/eg/x10.cgi
X10-Home-0.04/eg/x10
X10-Home-0.04/eg/x10.conf
X10-Home-0.04/eg/x10.tmpl
X10-Home-0.04/Makefile.PL
X10-Home-0.04/MANIFEST.SKIP
X10-Home-0.04/MANIFEST
X10-Home-0.04/t/
X10-Home-0.04/t/001Basic.t
X10-Home-0.04/t/002Locks.t
X10-Home-0.04/t/003DB.t
X10-Home-0.04/Changes
X10-Home-0.04/README
X10-Home-0.04/Home.pm
X10-Home-0.04/META.yml

  CPAN.pm: Going to build M/MS/MSCHILLI/X10-Home-0.04.tar.gz

>>> /Users/fly1003/bin/perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for X10::Home
>>> make
cp Home.pm blib/lib/X10/Home.pm
cp eg/x10 blib/script/x10
/Users/fly1003/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/x10
Manifying blib/man1/x10.1
Manifying blib/man3/X10::Home.3
  MSCHILLI/X10-Home-0.04.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /Users/fly1003/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/001Basic.t .. 
1..1
ok 1 - Receiver Code
ok
t/002Locks.t .. 
1..3
ok 1 - in/out sequence
ok 2 - in/out sequence
ok 3 - in/out sequence
ok
t/003DB.t ..... 
1..4
ok 1 # SKIP No /dev/ttyS0 found
ok 2 # SKIP No /dev/ttyS0 found
ok 3 # SKIP No /dev/ttyS0 found
ok 4 # SKIP No /dev/ttyS0 found
ok
All tests successful.
Files=3, Tests=8,  2 wallclock secs ( 0.07 usr  0.06 sys +  1.23 cusr  0.36 csys =  1.72 CPU)
Result: PASS
  MSCHILLI/X10-Home-0.04.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="X10-Home" VERSION="0.04" DATE="2009-03-28">
  <AUTHOR CPAN="MSCHILLI">Michael Schilli &lt;m@perlmeister.com></AUTHOR>
  <ABSTRACT>Configure X10 for your Home</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.10"/>
  <CODEBASE HREF="X10-Home-0.04.tar.gz"/>
  <PROVIDE NAME="X10::Home" VERSION="0.04"/>
  <REQUIRE NAME="ControlX10::CM11" VERSION="2.09"/>
  <REQUIRE NAME="ControlX10::CM17" VERSION="0.07"/>
  <REQUIRE NAME="DB_File::" VERSION="1.815"/>
  <REQUIRE NAME="Device::SerialPort" VERSION="1"/>
  <REQUIRE NAME="Log::Log4perl" VERSION="1.1"/>
  <REQUIRE NAME="YAML::" VERSION="0.35"/>
  <!-- Built 2009-03-29 with ActivePerl-1003 on ocelotl.activestate.com (Mac OS X 10.4.11) -->
</SOFTPKG>
>>> (cd /Users/fly1003/var/cpan/build/X10-Home-0.04-Z8bbn8 && tar cvf - X10-Home-0.04.ppd blib) | gzip -c >/Users/fly1003/var/REPO/M/MS/MSCHILLI/X10-Home-0.04.tar.gz
X10-Home-0.04.ppd
blib/
blib/lib/
blib/lib/X10/
blib/lib/X10/Home.pm
blib/man1/
blib/man1/x10.1
blib/man3/
blib/man3/X10::Home.3
blib/script/
blib/script/x10
>>> mv /Users/fly1003/var/cpan/build/X10-Home-0.04-Z8bbn8/X10-Home-0.04.ppd /Users/fly1003/var/REPO/M/MS/MSCHILLI
Finished 2009-03-29T06:06:38