PATH=/usr/bin:/bin Start 2011-05-01T06:27:02 ActivePerl-1400 CPAN-1.9402 Going to read '/Users/fly1400/var/cpan/Metadata' Database was generated on Sat, 30 Apr 2011 22:27:38 GMT Running make for S/SR/SRVANCE/P4-Server-0.11.1.tgz Checksum for /net/nas/data/cpan/authors/id/S/SR/SRVANCE/P4-Server-0.11.1.tgz ok P4-Server-0.11/ P4-Server-0.11/Build.PL P4-Server-0.11/Changes P4-Server-0.11/lib/ P4-Server-0.11/lib/._.DS_Store P4-Server-0.11/lib/.DS_Store P4-Server-0.11/lib/P4/ P4-Server-0.11/lib/P4/Server.pm P4-Server-0.11/Makefile.PL P4-Server-0.11/MANIFEST P4-Server-0.11/META.yml P4-Server-0.11/README P4-Server-0.11/t/ P4-Server-0.11/t/00-load.t P4-Server-0.11/t/boilerplate.t P4-Server-0.11/t/P4Server.t P4-Server-0.11/t/perlcritic.t P4-Server-0.11/t/perlcriticrc P4-Server-0.11/t/pod-coverage.t P4-Server-0.11/t/pod.t P4-Server-0.11/t/tlib/ P4-Server-0.11/t/tlib/findTestRunner.pl P4-Server-0.11/t/tlib/P4/ P4-Server-0.11/t/tlib/P4/Server/ P4-Server-0.11/t/tlib/P4/Server/Test/ P4-Server-0.11/t/tlib/P4/Server/Test/data/ P4-Server-0.11/t/tlib/P4/Server/Test/data/unpack_test.tgz P4-Server-0.11/t/tlib/P4/Server/Test/Server/ P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/ P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/AllocateFixedPortFirst.pm P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/ExtractFails.pm P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/FailedExec.pm P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/FailedSystem.pm P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/KillChld.pm P4-Server-0.11/t/tlib/P4/Server/Test/Server/Helper/Timeout.pm P4-Server-0.11/t/tlib/P4/Server/Test/Server.pm P4-Server-0.11/t/tlib/runtest.sh CPAN.pm: Going to build S/SR/SRVANCE/P4-Server-0.11.1.tgz >>> /Users/fly1400/bin/perl Makefile.PL Optional ExtUtils::MakeMaker::Coverage not available Warning: prerequisite Error::Exception 0 not found. Warning: prerequisite P4 0 not found. Checking if your kit is complete... Looks good Writing Makefile for P4::Server Writing MYMETA.yml ---- Unsatisfied dependencies detected during ---- ---- SRVANCE/P4-Server-0.11.1.tgz ---- Error::Exception [requires] P4 [requires] Running make test Delayed until after prerequisites Running test for module 'Error::Exception' Running make for S/SR/SRVANCE/Error-Exception-1.1.tgz Checksum for /net/nas/data/cpan/authors/id/S/SR/SRVANCE/Error-Exception-1.1.tgz ok Error-Exception-1.1/ Error-Exception-1.1/Build.PL Error-Exception-1.1/Changes Error-Exception-1.1/lib/ Error-Exception-1.1/lib/Error/ Error-Exception-1.1/lib/Error/Exception.pm Error-Exception-1.1/lib/Error/Exception/ Error-Exception-1.1/lib/Error/Exception/Class.pm Error-Exception-1.1/Makefile.PL Error-Exception-1.1/MANIFEST Error-Exception-1.1/META.yml Error-Exception-1.1/README Error-Exception-1.1/t/ Error-Exception-1.1/t/pod-coverage.t Error-Exception-1.1/t/pod.t Error-Exception-1.1/t/boilerplate.t Error-Exception-1.1/t/00-load.t Error-Exception-1.1/t/tlib/ Error-Exception-1.1/t/tlib/Error/ Error-Exception-1.1/t/tlib/Error/Exception/ Error-Exception-1.1/t/tlib/Error/Exception/Test/ Error-Exception-1.1/t/tlib/Error/Exception/Test/Exception.pm Error-Exception-1.1/t/tlib/Error/Exception/Test/Helper/ Error-Exception-1.1/t/tlib/Error/Exception/Test/Helper/TestExceptions.pm Error-Exception-1.1/t/tlib/Error/Exception/Test/Helper/UncaughtTest.pm Error-Exception-1.1/t/tlib/Error/Exception/Test/data/ Error-Exception-1.1/t/tlib/Error/Exception/Test/data/uncaught_test.pl Error-Exception-1.1/t/tlib/Error/Exception/Test/Class.pm Error-Exception-1.1/t/tlib/runtest.sh Error-Exception-1.1/t/tlib/findTestRunner.pl Error-Exception-1.1/t/ErrorException.t Error-Exception-1.1/t/ErrorExceptionClass.t CPAN.pm: Going to build S/SR/SRVANCE/Error-Exception-1.1.tgz >>> /Users/fly1400/bin/perl Makefile.PL Optional ExtUtils::MakeMaker::Coverage not available Warning: prerequisite Test::Unit 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Error::Exception Writing MYMETA.yml ---- Unsatisfied dependencies detected during ---- ---- SRVANCE/Error-Exception-1.1.tgz ---- Test::Unit [requires] Running make test Delayed until after prerequisites Running test for module 'Test::Unit' Running make for M/MC/MCAST/Test-Unit-0.25.tar.gz Checksum for /net/nas/data/cpan/authors/id/M/MC/MCAST/Test-Unit-0.25.tar.gz ok Test-Unit-0.25/ Test-Unit-0.25/doc/ Test-Unit-0.25/doc/consensus.txt Test-Unit-0.25/doc/release-checklist Test-Unit-0.25/doc/class-diagram.dia Test-Unit-0.25/doc/TODO Test-Unit-0.25/doc/class-diagram.txt Test-Unit-0.25/doc/class-diagram.png Test-Unit-0.25/TestLister.pl Test-Unit-0.25/Changes Test-Unit-0.25/lib/ Test-Unit-0.25/lib/Test/ Test-Unit-0.25/lib/Test/Unit/ Test-Unit-0.25/lib/Test/Unit/Tutorial.pm Test-Unit-0.25/lib/Test/Unit/Setup.pm Test-Unit-0.25/lib/Test/Unit/Assertion.pm Test-Unit-0.25/lib/Test/Unit/Debug.pm Test-Unit-0.25/lib/Test/Unit/UnitHarness.pm Test-Unit-0.25/lib/Test/Unit/TestRunner.pm Test-Unit-0.25/lib/Test/Unit/Assert.pm Test-Unit-0.25/lib/Test/Unit/Assertion/ Test-Unit-0.25/lib/Test/Unit/Assertion/CodeRef.pm Test-Unit-0.25/lib/Test/Unit/Assertion/Exception.pm Test-Unit-0.25/lib/Test/Unit/Assertion/Boolean.pm Test-Unit-0.25/lib/Test/Unit/Assertion/Regexp.pm Test-Unit-0.25/lib/Test/Unit/Error.pm Test-Unit-0.25/lib/Test/Unit/Loader.pm Test-Unit-0.25/lib/Test/Unit/HarnessUnit.pm Test-Unit-0.25/lib/Test/Unit/Exception.pm Test-Unit-0.25/lib/Test/Unit/Test.pm Test-Unit-0.25/lib/Test/Unit/TkTestRunner.pm Test-Unit-0.25/lib/Test/Unit/Decorator.pm Test-Unit-0.25/lib/Test/Unit/TestSuite.pm Test-Unit-0.25/lib/Test/Unit/Runner.pm Test-Unit-0.25/lib/Test/Unit/TestCase.pm Test-Unit-0.25/lib/Test/Unit/Runner/ Test-Unit-0.25/lib/Test/Unit/Runner/Terminal.pm Test-Unit-0.25/lib/Test/Unit/Listener.pm Test-Unit-0.25/lib/Test/Unit/Procedural.pm Test-Unit-0.25/lib/Test/Unit/Result.pm Test-Unit-0.25/lib/Test/Unit/Failure.pm Test-Unit-0.25/lib/Test/Unit/Warning.pm Test-Unit-0.25/lib/Test/Unit.pm Test-Unit-0.25/examples/ Test-Unit-0.25/examples/patch100132-1 Test-Unit-0.25/examples/patch100132 Test-Unit-0.25/examples/patch100132-2 Test-Unit-0.25/examples/fail_example.pm Test-Unit-0.25/examples/Experimental/ Test-Unit-0.25/examples/Experimental/Sample.pm Test-Unit-0.25/examples/tester.png Test-Unit-0.25/examples/README Test-Unit-0.25/t/ Test-Unit-0.25/t/tlib/ Test-Unit-0.25/t/tlib/TestTest.pm Test-Unit-0.25/t/tlib/WasRun.pm Test-Unit-0.25/t/tlib/OverrideTestCase.pm Test-Unit-0.25/t/tlib/InheritedInheritedTestCase.pm Test-Unit-0.25/t/tlib/SuiteTest.pm Test-Unit-0.25/t/tlib/BadSuite/ Test-Unit-0.25/t/tlib/BadSuite/BadUse.pm Test-Unit-0.25/t/tlib/BadSuite/SyntaxError.pm Test-Unit-0.25/t/tlib/OneTestCase.pm Test-Unit-0.25/t/tlib/ListenerTest.pm Test-Unit-0.25/t/tlib/NoTestCases.pm Test-Unit-0.25/t/tlib/InheritedSuite/ Test-Unit-0.25/t/tlib/InheritedSuite/Simple.pm Test-Unit-0.25/t/tlib/InheritedSuite/OverrideNew.pm Test-Unit-0.25/t/tlib/InheritedSuite/TestNames.pm Test-Unit-0.25/t/tlib/InheritedSuite/OverrideNewName.pm Test-Unit-0.25/t/tlib/TornDown.pm Test-Unit-0.25/t/tlib/WillDie.pm Test-Unit-0.25/t/tlib/TestAssertionCodeRef.pm Test-Unit-0.25/t/tlib/BadSuitesTest.pm Test-Unit-0.25/t/tlib/Success.pm Test-Unit-0.25/t/tlib/AllTests.pm Test-Unit-0.25/t/tlib/AssertTest.pm Test-Unit-0.25/t/tlib/RunnerTest.pm Test-Unit-0.25/t/tlib/NoTestCaseClass.pm Test-Unit-0.25/t/tlib/InheritedTestCase.pm Test-Unit-0.25/t/tlib/ActiveTestTest.pm Test-Unit-0.25/t/tlib/ExceptionChecker.pm Test-Unit-0.25/t/tlib/TestObject.pm Test-Unit-0.25/t/tlib/FilteredSuite.pm Test-Unit-0.25/t/try_examples.t Test-Unit-0.25/t/assert.t Test-Unit-0.25/t/all_tests.t Test-Unit-0.25/TestRunner.pl Test-Unit-0.25/MANIFEST Test-Unit-0.25/TkTestRunner.pl Test-Unit-0.25/COPYING.Artistic Test-Unit-0.25/AUTHORS Test-Unit-0.25/README Test-Unit-0.25/META.yml Test-Unit-0.25/ChangeLog Test-Unit-0.25/COPYING.GPL-2 Test-Unit-0.25/Makefile.PL CPAN.pm: Going to build M/MC/MCAST/Test-Unit-0.25.tar.gz >>> /Users/fly1400/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Test::Unit Writing MYMETA.yml >>> make cp lib/Test/Unit/Error.pm blib/lib/Test/Unit/Error.pm cp TestLister.pl blib/lib/Test/TestLister.pl cp lib/Test/Unit/Loader.pm blib/lib/Test/Unit/Loader.pm cp lib/Test/Unit/Tutorial.pm blib/lib/Test/Unit/Tutorial.pm cp lib/Test/Unit/Assertion.pm blib/lib/Test/Unit/Assertion.pm cp lib/Test/Unit/Setup.pm blib/lib/Test/Unit/Setup.pm cp TestRunner.pl blib/lib/Test/TestRunner.pl cp lib/Test/Unit/Debug.pm blib/lib/Test/Unit/Debug.pm cp lib/Test/Unit/Assertion/Boolean.pm blib/lib/Test/Unit/Assertion/Boolean.pm cp lib/Test/Unit/Decorator.pm blib/lib/Test/Unit/Decorator.pm cp lib/Test/Unit/TestSuite.pm blib/lib/Test/Unit/TestSuite.pm cp lib/Test/Unit/Runner/Terminal.pm blib/lib/Test/Unit/Runner/Terminal.pm cp lib/Test/Unit/Listener.pm blib/lib/Test/Unit/Listener.pm cp lib/Test/Unit/Procedural.pm blib/lib/Test/Unit/Procedural.pm cp TkTestRunner.pl blib/lib/Test/TkTestRunner.pl cp lib/Test/Unit/Runner.pm blib/lib/Test/Unit/Runner.pm cp lib/Test/Unit/UnitHarness.pm blib/lib/Test/Unit/UnitHarness.pm cp lib/Test/Unit/HarnessUnit.pm blib/lib/Test/Unit/HarnessUnit.pm cp lib/Test/Unit/Exception.pm blib/lib/Test/Unit/Exception.pm cp lib/Test/Unit/Test.pm blib/lib/Test/Unit/Test.pm cp lib/Test/Unit/TestCase.pm blib/lib/Test/Unit/TestCase.pm cp lib/Test/Unit/Assertion/Exception.pm blib/lib/Test/Unit/Assertion/Exception.pm cp lib/Test/Unit/Result.pm blib/lib/Test/Unit/Result.pm cp lib/Test/Unit/TestRunner.pm blib/lib/Test/Unit/TestRunner.pm cp lib/Test/Unit/Failure.pm blib/lib/Test/Unit/Failure.pm cp lib/Test/Unit.pm blib/lib/Test/Unit.pm cp lib/Test/Unit/TkTestRunner.pm blib/lib/Test/Unit/TkTestRunner.pm cp lib/Test/Unit/Assertion/Regexp.pm blib/lib/Test/Unit/Assertion/Regexp.pm cp lib/Test/Unit/Assert.pm blib/lib/Test/Unit/Assert.pm cp lib/Test/Unit/Warning.pm blib/lib/Test/Unit/Warning.pm cp lib/Test/Unit/Assertion/CodeRef.pm blib/lib/Test/Unit/Assertion/CodeRef.pm Manifying blib/man3/Test::Unit::Error.3 Manifying blib/man3/Test::Unit::Tutorial.3 Manifying blib/man3/Test::Unit::Loader.3 Manifying blib/man3/Test::Unit::Setup.3 Manifying blib/man3/Test::Unit::Assertion.3 Manifying blib/man3/Test::Unit::Debug.3 Manifying blib/man3/Test::Unit::Assertion::Boolean.3 Manifying blib/man3/Test::Unit::Decorator.3 Manifying blib/man3/Test::Unit::TestSuite.3 Manifying blib/man3/Test::Unit::Runner::Terminal.3 Manifying blib/man3/Test::Unit::Listener.3 Manifying blib/man3/Test::Unit::Procedural.3 Manifying blib/man3/Test::Unit::Runner.3 Manifying blib/man3/Test::Unit::UnitHarness.3 Manifying blib/man3/Test::Unit::HarnessUnit.3 Manifying blib/man3/Test::Unit::Exception.3 Manifying blib/man3/Test::Unit::Assertion::Exception.3 Manifying blib/man3/Test::Unit::TestCase.3 Manifying blib/man3/Test::Unit::Test.3 Manifying blib/man3/Test::Unit::Result.3 Manifying blib/man3/Test::Unit::TestRunner.3 Manifying blib/man3/Test::Unit::Failure.3 Manifying blib/man3/Test::Unit::Assertion::Regexp.3 Manifying blib/man3/Test::Unit::TkTestRunner.3 Manifying blib/man3/Test::Unit.3 Manifying blib/man3/Test::Unit::Assert.3 Manifying blib/man3/Test::Unit::Assertion::CodeRef.3 Manifying blib/man3/Test::Unit::Warning.3 MCAST/Test-Unit-0.25.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1400/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/all_tests.t ..... STARTING TEST RUN 1..45 ok PASS test_runner_printing ok PASS test_success ok PASS test_set_up_throws_no_tear_down ok PASS test_assert_with_non_assertion_object ok PASS test_failure ok PASS test_tear_down_dies ok PASS test_assert_on_failing_regex ok PASS test_failure_exception ok PASS test_die ok PASS test_error ok PASS test_tear_down_fails ok PASS test_fail ok PASS test_setup_fails ok PASS test_set_up_dies_no_tear_down ok PASS test_case_to_string ok PASS test_run_and_tear_down_both_throw ok PASS test_was_not_successful ok PASS test_was_successful ok PASS test_was_run ok PASS test_tear_down_after_error ok PASS test_assert_on_matching_regex ok PASS test_run_and_tear_down_both_throw2 ok PASS test_failure ok PASS test_start_stop ok PASS test_error ok PASS test_suite_with_bad_use ok PASS test_suite_with_syntax_error ok PASS test_filter_via_sub ok PASS test_reset_filtering ok PASS test_filter_broken_token ok PASS test_filter_via_method_list ok PASS test_filter_via_both ok PASS test_throws_error_simple ok PASS test_dies ok PASS test_names ok PASS test_no_test_case_class ok PASS test_no_test_cases ok PASS test_one_test_case ok PASS test_not_existing_test_case ok PASS test_inherited_tests ok PASS test_inherited_inherited_tests ok PASS test_shadowed_tests ok PASS test_complex_inheritance ok PASS test_success ok PASS test_success ok t/assert.t ........ STARTING TEST RUN 1..40 ok PASS 0 == 'foo' ok PASS 1 == '1.0' ok PASS '1.0' == 1 ok PASS foo eq foo ok PASS 0E0 == 0 ok PASS 0 == 'foo' ok PASS both undef ok PASS 0 == 0 ok PASS 0 == 0.0 ok PASS 0.0 == 0 ok PASS 0.0 == 0.0 ok PASS '' == '' ok PASS 1 != 'foo' ok PASS 'foo' ne 0 ok PASS 'foo' ne 1 ok PASS 0 != 1 ok PASS 'foo' ne 'bar' ok PASS 'foo' ne undef ok PASS undef ne 'foo' ok PASS test_assert_does_not_match ok PASS test_assert_deep_equals ok PASS test_ok_bad_args ok PASS test_assert_matches ok PASS test_numericness ok PASS test_multi_assert not ok ERROR test_ok_not_equals t/tlib/AssertTest.pm:266 - test_ok_not_equals(Class::Inner::__A25) Expected Test::Unit::Failure `'foo' did not match /(?-xism:x)/', got `'foo' did not match /(?^:x)/' ok PASS test_fail_assert_not_equals ok PASS test_succeed_assert_null ok PASS test_succeed_assert_not_null ok PASS test_fail ok PASS test_assert_raises ok PASS test_success_assert_not_equals ok PASS test_assert_str_equals ok PASS test_ok_boolean ok PASS test_assert_equals ok PASS test_fail_assert_null ok PASS test_fail_assert_not_null ok PASS test_assert_equals_null not ok ERROR test_assert t/tlib/AssertTest.pm:76 - test_assert(Class::Inner::__A38) Expected Test::Unit::Failure `'qux' did not match /(?-xism:foo)/', got `'qux' did not match /(?^:foo)/' ok PASS test_ok_equals Failed 2/40 subtests > The STDERR redirection may not work or may behave differently under > your OS 'darwin'. That will probably cause this test to fail. t/try_examples.t .. 1..4 # Running under perl version 5.014000 for darwin # Current time local: Sun May 1 06:27:12 2011 # Current time GMT: Sun May 1 13:27:12 2011 # Using Test.pm version 1.25 ok 1 ok 2 ok 3 ok 4 ok Test Summary Report ------------------- t/assert.t (Wstat: 0 Tests: 40 Failed: 2) Failed tests: 26, 39 Files=3, Tests=89, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.15 cusr 0.09 csys = 1.29 CPU) Result: FAIL Failed 1/3 test programs. 2/89 subtests failed. make: *** [test_dynamic] Error 255 MCAST/Test-Unit-0.25.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports MCAST/Test-Unit-0.25.tar.gz Running make for S/SR/SRVANCE/Error-Exception-1.1.tgz Has already been unwrapped into directory /Users/fly1400/var/cpan/build/Error-Exception-1.1-P_fNy_ CPAN.pm: Going to build S/SR/SRVANCE/Error-Exception-1.1.tgz Warning: Prerequisite 'Test::Unit => 0' for 'SRVANCE/Error-Exception-1.1.tgz' failed when processing 'MCAST/Test-Unit-0.25.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Error/Exception/Class.pm blib/lib/Error/Exception/Class.pm cp lib/Error/Exception.pm blib/lib/Error/Exception.pm Manifying blib/man3/Error::Exception::Class.3 Manifying blib/man3/Error::Exception.3 SRVANCE/Error-Exception-1.1.tgz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1400/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Error::Exception 1.1, Perl 5.014000, /Users/fly1400/bin/perl t/00-load.t .............. 1..2 ok 1 - use Error::Exception; ok 2 - use Error::Exception::Class; ok t/boilerplate.t .......... 1..4 ok 1 - README contains no boilerplate text ok 2 - Changes contains no boilerplate text ok 3 - lib/Error/Exception.pm contains no boilerplate text ok 4 - lib/Error/Exception/Class.pm contains no boilerplate text ok Can't locate Test/Unit/HarnessUnit.pm in @INC (@INC contains: /Users/fly1400/var/cpan/build/Error-Exception-1.1-P_fNy_/blib/lib /Users/fly1400/var/cpan/build/Error-Exception-1.1-P_fNy_/blib/arch /Users/fly1400/var/megalib /Users/fly1400/var/megalib /Users/fly1400/Library/ActivePerl-5.14/lib /Users/fly1400/ap1400/site/lib /Users/fly1400/ap1400/lib .) at t/ErrorException.t line 1. BEGIN failed--compilation aborted at t/ErrorException.t line 1. t/ErrorException.t ....... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Can't locate Test/Unit/HarnessUnit.pm in @INC (@INC contains: /Users/fly1400/var/cpan/build/Error-Exception-1.1-P_fNy_/blib/lib /Users/fly1400/var/cpan/build/Error-Exception-1.1-P_fNy_/blib/arch /Users/fly1400/var/megalib /Users/fly1400/var/megalib /Users/fly1400/Library/ActivePerl-5.14/lib /Users/fly1400/ap1400/site/lib /Users/fly1400/ap1400/lib .) at t/ErrorExceptionClass.t line 1. BEGIN failed--compilation aborted at t/ErrorExceptionClass.t line 1. t/ErrorExceptionClass.t .. Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/pod-coverage.t ......... 1..2 ok 1 - Pod coverage on Error::Exception ok 2 - Pod coverage on Error::Exception::Class ok t/pod.t .................. 1..2 ok 1 - POD test for blib/lib/Error/Exception.pm ok 2 - POD test for blib/lib/Error/Exception/Class.pm ok Test Summary Report ------------------- t/ErrorException.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/ErrorExceptionClass.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=6, Tests=10, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.21 cusr 0.04 csys = 0.30 CPU) Result: FAIL Failed 2/6 test programs. 0/10 subtests failed. make: *** [test_dynamic] Error 255 SRVANCE/Error-Exception-1.1.tgz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports SRVANCE/Error-Exception-1.1.tgz Running test for module 'P4' The module P4 isn't available on CPAN. Either the module has not yet been uploaded to CPAN, or it is temporary unavailable. Please contact the author to find out more about the status. Try 'i P4'. Running make for S/SR/SRVANCE/P4-Server-0.11.1.tgz Has already been unwrapped into directory /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA CPAN.pm: Going to build S/SR/SRVANCE/P4-Server-0.11.1.tgz Warning: Prerequisite 'Error::Exception => 0' for 'SRVANCE/P4-Server-0.11.1.tgz' failed when processing 'SRVANCE/Error-Exception-1.1.tgz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/._.DS_Store blib/lib/._.DS_Store cp lib/.DS_Store blib/lib/.DS_Store cp lib/P4/Server.pm blib/lib/P4/Server.pm Manifying blib/man3/P4::Server.3 SRVANCE/P4-Server-0.11.1.tgz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly1400/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use P4::Server;' # at t/00-load.t line 6. # Tried to use 'P4::Server'. # Error: # Unhandled perl error caught at toplevel: # # Can't locate Error/Exception.pm in @INC (@INC contains: /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/arch /Users/fly1400/var/megalib /Users/fly1400/Library/ActivePerl-5.14/lib /Users/fly1400/ap1400/site/lib /Users/fly1400/ap1400/lib) # # Thrown from: /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm:26 # # Full stack trace: # # P4::Server::BEGIN() called at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26 # eval {...} called at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26 # require P4/Server.pm called at (eval 4) line 2 # main::BEGIN() called at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26 # eval {...} called at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26 # eval 'package main; # use P4::Server @{$args[0]}; # 1; # # ;' called at /Users/fly1400/var/megalib/Test/More.pm line 885 # Test::More::_eval('package main;\x{a}use P4::Server @{$args[0]};\x{a}1;\x{a}', 'ARRAY(0x10082c3d0)') called at /Users/fly1400/var/megalib/Test/More.pm line 860 # Test::More::use_ok('P4::Server') called at t/00-load.t line 6 # main::BEGIN() called at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26 # eval {...} called at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26 # # BEGIN failed--compilation aborted at /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib/P4/Server.pm line 26. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. Name "IPC::Cmd::I18N::en::Lexicon" used only once: possible typo at /Users/fly1400/var/megalib/Locale/Maketext.pm line 443: Name "Archive::Extract::I18N::en::Lexicon" used only once: possible typo at /Users/fly1400/var/megalib/Locale/Maketext.pm line 443: Name "Params::Check::I18N::en::Lexicon" used only once: possible typo at /Users/fly1400/var/megalib/Locale/Maketext.pm line 443: Name "Module::Load::Conditional::I18N::en::Lexicon" used only once: possible typo at /Users/fly1400/var/megalib/Locale/Maketext.pm line 443: Use of uninitialized value $P4::Server::VERSION in concatenation (.) or string at t/00-load.t line 9: # Testing P4::Server , Perl 5.014000, /Users/fly1400/bin/perl # Looks like you failed 1 test of 1. t/00-load.t ....... 1..1 not ok 1 - use P4::Server; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text ok 2 - Changes contains no boilerplate text ok 3 - lib/P4/Server.pm contains no boilerplate text ok Can't locate Test/Unit/HarnessUnit.pm in @INC (@INC contains: /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/lib /Users/fly1400/var/cpan/build/P4-Server-0.11-IpK8vA/blib/arch /Users/fly1400/var/megalib /Users/fly1400/var/megalib /Users/fly1400/Library/ActivePerl-5.14/lib /Users/fly1400/ap1400/site/lib /Users/fly1400/ap1400/lib .) at t/P4Server.t line 1. BEGIN failed--compilation aborted at t/P4Server.t line 1. t/P4Server.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run # Failed test 'Test::Perl::Critic for "blib/lib/P4/Server.pm"' # at /Users/fly1400/var/megalib/Test/Perl/Critic.pm line 110. # # Perl::Critic found these violations in "blib/lib/P4/Server.pm": # Modules have to return a true value ("1;") at line 1, column 1. Use "1;" as the last statement of the module. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 118, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 119, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 120, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 121, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 122, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 123, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 124, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 125, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 127, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 128, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 130, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 134, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 140, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 140, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 140, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 142, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 142, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 143, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 143, column 25. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 143, column 25. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 144, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 144, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 144, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 144, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 144, column 43. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 144, column 43. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 145, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 145, column 22. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 145, column 22. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 23. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 146, column 23. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 41. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 146, column 41. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 147, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 147, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 147, column 27. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 147, column 27. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 147, column 49. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 147, column 49. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 149, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 149, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 155, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 156, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 156, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 159, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 162, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 167, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 168, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 168, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 169, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 169, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 171, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 171, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 175, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 181, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 182, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 183, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 183, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 185, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 185, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 189, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 191, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 191, column 33. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 191, column 42. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 193, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 194, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 195, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 196, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 200, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 201, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 204, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 206, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 207, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 217, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 218, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 219, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 219, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 220, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 220, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 220, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 222, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 223, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 224, column 18. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 226, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 226, column 31. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 226, column 43. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 229, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 229, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 234, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 235, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 235, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 237, column 8. (no explanation). (Severity: 5) # Use of low precedence operators is not allowed at line 238, column 9. Replace low precedence operators with the high precedence substitutes. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 239, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 242, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 242, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 243, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 244, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 244, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 245, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 245, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 246, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 249, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 250, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 251, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 252, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 252, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 252, column 39. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 252, column 56. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 252, column 70. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 253, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 255, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 255, column 27. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 255, column 44. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 260, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 261, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 261, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 263, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 263, column 43. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 264, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 264, column 19. (no explanation). (Severity: 5) # Method invokation should use "()" at line 264, column 22. Use "->MethodName()" instead of "->MethodName". (Severity: 5) # Use of "print", "die", and "exit" in modules is not allowed at line 266, column 5. Use methods of LayoutObject or MainObject instead. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 266, column 11. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 266, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 267, column 11. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 269, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 269, column 31. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 274, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 275, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 276, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 276, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 278, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 278, column 34. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 280, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 280, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 280, column 50. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 280, column 62. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 282, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 282, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 282, column 29. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 287, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 288, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 289, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 289, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 290, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 290, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 290, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 292, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 292, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 297, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 297, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 298, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 299, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 300, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 304, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 305, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 305, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 307, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 308, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 311, column 11. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 311, column 33. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 314, column 28. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 318, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 318, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 318, column 32. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 323, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 324, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 324, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 326, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 326, column 31. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 327, column 66. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 330, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 330, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 331, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 335, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 336, column 55. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 339, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 339, column 18. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 339, column 26. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 339, column 36. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 339, column 61. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 339, column 71. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 342, column 11. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 344, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 348, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 355, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 356, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 356, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 358, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 361, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 362, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 362, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 364, column 30. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 367, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 368, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 368, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 368, column 26. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 371, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 371, column 55. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 372, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 372, column 18. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 372, column 45. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 374, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 374, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 374, column 43. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 377, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 378, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 378, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 379, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 379, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 381, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 382, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 383, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 384, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 384, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 387, column 11. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 391, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 391, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 392, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 395, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 396, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 396, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 398, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 398, column 31. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 398, column 43. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 398, column 52. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 401, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 402, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 402, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 404, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 404, column 32. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 405, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 406, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 406, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 407, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 407, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 408, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 412, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 412, column 36. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 412, column 41. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 414, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 415, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 415, column 31. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 416, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 421, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 422, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 423, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 426, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 427, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 428, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 428, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 430, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 430, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 430, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 432, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 432, column 38. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 434, column 28. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 440, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 441, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 441, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 443, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 443, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 444, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 445, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 445, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 446, column 15. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 446, column 27. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 449, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 450, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 451, column 30. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 453, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 453, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 453, column 35. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 456, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 458, column 35. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 459, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 463, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 463, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 463, column 23. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 465, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 465, column 19. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 466, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 467, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 468, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 468, column 42. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 472, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 472, column 36. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 474, column 39. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 475, column 28. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 480, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 488, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 489, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 492, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 499, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 499, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 499, column 29. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 501, column 12. (no explanation). (Severity: 5) # Looks like you failed 1 test of 1. t/perlcritic.t .... 1..1 not ok 1 - Test::Perl::Critic for "blib/lib/P4/Server.pm" Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on P4::Server ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/P4/Server.pm ok Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/P4Server.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/perlcritic.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=6, Tests=7, 5 wallclock secs ( 0.04 usr 0.02 sys + 2.30 cusr 0.17 csys = 2.53 CPU) Result: FAIL Failed 3/6 test programs. 2/7 subtests failed. make: *** [test_dynamic] Error 255 SRVANCE/P4-Server-0.11.1.tgz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports SRVANCE/P4-Server-0.11.1.tgz Finished 2011-05-01T06:27:21