PATH=/usr/bin:/bin:/Users/fly1800/var/megalib/bin
Start 2015-05-14T07:03:27
ActivePerl-1800 CPAN-2.00
Reading '/Users/fly1800/var/cpan/Metadata'
Database was generated on Thu, 14 May 2015 05:17:02 GMT
Running make for D/DA/DAMS/IO-Socket-Timeout-0.29.tar.gz
Checksum for /data/cpan/authors/id/D/DA/DAMS/IO-Socket-Timeout-0.29.tar.gz ok
IO-Socket-Timeout-0.29
IO-Socket-Timeout-0.29/README
IO-Socket-Timeout-0.29/Changes
IO-Socket-Timeout-0.29/LICENSE
IO-Socket-Timeout-0.29/dist.ini
IO-Socket-Timeout-0.29/META.yml
IO-Socket-Timeout-0.29/MANIFEST
IO-Socket-Timeout-0.29/Build.PL
IO-Socket-Timeout-0.29/t
IO-Socket-Timeout-0.29/t/io_sock.t
IO-Socket-Timeout-0.29/t/io_unix.t
IO-Socket-Timeout-0.29/t/preload.t
IO-Socket-Timeout-0.29/t/timeout.t
IO-Socket-Timeout-0.29/Makefile.PL
IO-Socket-Timeout-0.29/t/00-compile.t
IO-Socket-Timeout-0.29/t/release-synopsis.t
IO-Socket-Timeout-0.29/t/release-distmeta.t
IO-Socket-Timeout-0.29/t/tlib
IO-Socket-Timeout-0.29/t/tlib/TestTimeout.pm
IO-Socket-Timeout-0.29/t/timeout_setsockopt.t
IO-Socket-Timeout-0.29/lib/IO/Socket
IO-Socket-Timeout-0.29/lib/IO/Socket/Timeout.pm
IO-Socket-Timeout-0.29/t/release-pod-coverage.t
CPAN.pm: Building D/DA/DAMS/IO-Socket-Timeout-0.29.tar.gz
>>> /Users/fly1800/ap1800-297214/bin/perl-dynamic Makefile.PL
Warning: prerequisite PerlIO::via::Timeout 0.30 not found. We have 0.29.
Congratulations, your toolchain understands 'configure_requires'!
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for IO::Socket::Timeout
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- DAMS/IO-Socket-Timeout-0.29.tar.gz ----
PerlIO::via::Timeout [requires]
Running make test
Delayed until after prerequisites
Running test for module 'PerlIO::via::Timeout'
Running make for D/DA/DAMS/PerlIO-via-Timeout-0.30.tar.gz
Checksum for /data/cpan/authors/id/D/DA/DAMS/PerlIO-via-Timeout-0.30.tar.gz ok
PerlIO-via-Timeout-0.30
PerlIO-via-Timeout-0.30/README
PerlIO-via-Timeout-0.30/Changes
PerlIO-via-Timeout-0.30/LICENSE
PerlIO-via-Timeout-0.30/dist.ini
PerlIO-via-Timeout-0.30/META.yml
PerlIO-via-Timeout-0.30/MANIFEST
PerlIO-via-Timeout-0.30/Build.PL
PerlIO-via-Timeout-0.30/README.pod
PerlIO-via-Timeout-0.30/Makefile.PL
PerlIO-via-Timeout-0.30/t
PerlIO-via-Timeout-0.30/t/00-compile.t
PerlIO-via-Timeout-0.30/t/release-distmeta.t
PerlIO-via-Timeout-0.30/t/01_socket_timeout.t
PerlIO-via-Timeout-0.30/t/release-pod-coverage.t
PerlIO-via-Timeout-0.30/lib/PerlIO/via
PerlIO-via-Timeout-0.30/lib/PerlIO/via/Timeout.pm
CPAN.pm: Building D/DA/DAMS/PerlIO-via-Timeout-0.30.tar.gz
>>> /Users/fly1800/ap1800-297214/bin/perl-dynamic Makefile.PL
Congratulations, your toolchain understands 'configure_requires'!
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for PerlIO::via::Timeout
Writing MYMETA.yml and MYMETA.json
>>> make
cp README.pod blib/lib/PerlIO/via/README.pod
cp lib/PerlIO/via/Timeout.pm blib/lib/PerlIO/via/Timeout.pm
Manifying 2 pod documents
DAMS/PerlIO-via-Timeout-0.30.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly1800/ap1800-297214/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..1
ok 1 - PerlIO/via/Timeout.pm loaded ok
ok
# Acme::Override::INET replaced IO::Socket::INET with IO::Socket::IP 0.37
t/01_socket_timeout.t .....
# Subtest: socket without timeout
ok 1 - layer has default 0 read timeout
ok 2 - layer has default 0 write timeout
ok 3 - got proper response
1..3
ok 1 - socket without timeout
# Subtest: socket with timeout
ok 1 - layer has timeout enabled
ok 2 - layer has proper read timeout
ok 3 - layer has default 0 write timeout
ok 4 - got undef response
ok 5 - error is timeout
1..5
ok 2 - socket with timeout
# Subtest: socket with disabled timeout
ok 1 - layer has 0.5 read timeout
ok 2 - layer has default 0 write timeout
ok 3 - got proper response
1..3
ok 3 - socket with disabled timeout
1..3
ok
t/release-distmeta.t ...... skipped: these tests are for release candidate testing
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
All tests successful.
Files=4, Tests=4, 4 wallclock secs ( 0.04 usr 0.01 sys + 0.26 cusr 0.07 csys = 0.38 CPU)
Result: PASS
DAMS/PerlIO-via-Timeout-0.30.tar.gz
make test TEST_VERBOSE=1 -- OK
Damien Krotkine <dams@cpan.org>
a PerlIO layer that adds read & write timeout to a handle
>>> (cd /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_ && tar cvf - PerlIO-via-Timeout-0.30.ppd blib) | gzip -c >/Users/fly1800/var/REPO/D/DA/DAMS/PerlIO-via-Timeout-0.30.tar.gz
PerlIO-via-Timeout-0.30.ppd
blib/
blib/lib/
blib/lib/PerlIO/
blib/lib/PerlIO/via/
blib/lib/PerlIO/via/README.pod
blib/lib/PerlIO/via/Timeout.pm
blib/man3/
blib/man3/PerlIO::via::README.3
blib/man3/PerlIO::via::Timeout.3
>>> mv /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/PerlIO-via-Timeout-0.30.ppd /Users/fly1800/var/REPO/D/DA/DAMS
Running make for D/DA/DAMS/IO-Socket-Timeout-0.29.tar.gz
Prepending /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/blib/arch /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /Users/fly1800/var/cpan/build/IO-Socket-Timeout-0.29-9dzSab
Prepending /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/blib/arch /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building D/DA/DAMS/IO-Socket-Timeout-0.29.tar.gz
>>> make
cp lib/IO/Socket/Timeout.pm blib/lib/IO/Socket/Timeout.pm
Manifying 1 pod document
DAMS/IO-Socket-Timeout-0.29.tar.gz
make -- OK
Prepending /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/blib/arch /Users/fly1800/var/cpan/build/PerlIO-via-Timeout-0.30-CFqmZ_/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly1800/ap1800-297214/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..1
ok 1 - IO/Socket/Timeout.pm loaded ok
ok
t/io_sock.t ...............
1..26
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok 19
ok 20
ok 21
ok 22
ok 23
ok 24
ok 25
ok 26
ok
t/io_unix.t ...............
1..5
ok 1
ok 2
ok 3
ok 4
ok 5
ok
t/preload.t ...............
ok 1 - INC contains composed class IO::Socket::Unix with SetSockOpt role"
ok 2 - file name is ok
ok 3 - INC contains composed class IO::Socket::Unix with PerlIO role"
ok 4 - file name is ok
ok 5 - INC contains composed class IO::Socket::INET with SetSockOpt role"
ok 6 - file name is ok
ok 7 - INC contains composed class IO::Socket::INET with PerlIO role"
ok 8 - file name is ok
1..8
ok
t/release-distmeta.t ...... skipped: these tests are for release candidate testing
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-synopsis.t ...... skipped: these tests are for release candidate testing
# Acme::Override::INET replaced IO::Socket::INET with IO::Socket::IP 0.37
t/timeout.t ...............
# Subtest: test with no delays and no timeouts
ok 1 - got proper response 1
ok 2 - got proper response 2
1..2
ok 1 - test with no delays and no timeouts
# Subtest: test with read timeout
ok 1 - client does PerlIO
ok 2 - got proper response 1
ok 3 - we've hit timeout
ok 4 - and error is timeout
1..4
ok 2 - test with read timeout
# Subtest: test with sysread timeout
ok 1 - client does PerlIO
ok 2 - got proper response 1
ok 3 - we've hit timeout
ok 4 - and error is timeout
1..4
ok 3 - test with sysread timeout
# Subtest: test standard sysread/syswrite no timeout
ok 1 - client does not do PerlIO
ok 2 - got proper response 1
ok 3 - got proper response 2
1..3
ok 4 - test standard sysread/syswrite no timeout
1..4
ok
# Acme::Override::INET replaced IO::Socket::INET with IO::Socket::IP 0.37
t/timeout_setsockopt.t ....
# Subtest: test with no delays and no timeouts
ok 1 - got proper response 1
ok 2 - got proper response 2
1..2
ok 1 - test with no delays and no timeouts
# Subtest: test with sysread timeout
ok 1 - client does SetSockOpt
ok 2 - got proper response 1
ok 3 - socket is valid
ok 4 - we've hit timeout
ok 5
1..5
ok 2 - test with sysread timeout
1..2
ok
All tests successful.
Files=9, Tests=46, 23 wallclock secs ( 0.07 usr 0.03 sys + 0.66 cusr 0.18 csys = 0.94 CPU)
Result: PASS
DAMS/IO-Socket-Timeout-0.29.tar.gz
make test TEST_VERBOSE=1 -- OK
Damien Krotkine <dams@cpan.org>
IO::Socket with read/write timeout
>>> (cd /Users/fly1800/var/cpan/build/IO-Socket-Timeout-0.29-9dzSab && tar cvf - IO-Socket-Timeout-0.29.ppd blib) | gzip -c >/Users/fly1800/var/REPO/D/DA/DAMS/IO-Socket-Timeout-0.29.tar.gz
IO-Socket-Timeout-0.29.ppd
blib/
blib/lib/
blib/lib/IO/
blib/lib/IO/Socket/
blib/lib/IO/Socket/Timeout.pm
blib/man3/
blib/man3/IO::Socket::Timeout.3
>>> mv /Users/fly1800/var/cpan/build/IO-Socket-Timeout-0.29-9dzSab/IO-Socket-Timeout-0.29.ppd /Users/fly1800/var/REPO/D/DA/DAMS
Finished 2015-05-14T07:04:00