PATH=/usr/bin:/bin:/Users/fly1800/cpanfly-5.18/var/megalib/bin
Start 2016-01-07T09:14:01
ActivePerl-1800 CPAN-2.00
Reading '/Users/fly1800/cpanfly-5.18/var/cpan/Metadata'
  Database was generated on Thu, 07 Jan 2016 06:53:39 GMT
Running make for M/MS/MSCHILLI/ZWave-Protocol-0.04.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/M/MS/MSCHILLI/ZWave-Protocol-0.04.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/M/MS/MSCHILLI/CHECKSUMS
Checksum for /Users/fly1800/cpanfly-5.18/var/cpan/sources/authors/id/M/MS/MSCHILLI/ZWave-Protocol-0.04.tar.gz ok
ZWave-Protocol-0.04/
ZWave-Protocol-0.04/Makefile.PL
ZWave-Protocol-0.04/Changes
ZWave-Protocol-0.04/eg/
ZWave-Protocol-0.04/eg/zwave-protocol
ZWave-Protocol-0.04/MANIFEST.SKIP
ZWave-Protocol-0.04/META.yml
ZWave-Protocol-0.04/t/
ZWave-Protocol-0.04/t/001Basic.t
ZWave-Protocol-0.04/lib/
ZWave-Protocol-0.04/lib/ZWave/
ZWave-Protocol-0.04/lib/ZWave/Protocol.pm
ZWave-Protocol-0.04/README
ZWave-Protocol-0.04/META.json
ZWave-Protocol-0.04/MANIFEST
ZWave-Protocol-0.04/v

  CPAN.pm: Building M/MS/MSCHILLI/ZWave-Protocol-0.04.tar.gz

>>> /Users/fly1800/ap1800-297214/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly1800/cpanfly-5.18/var/megalib
Want /Users/fly1800/ap1800-297214/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for ZWave::Protocol
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/ZWave/Protocol.pm blib/lib/ZWave/Protocol.pm
Manifying 1 pod document
  MSCHILLI/ZWave-Protocol-0.04.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly1800/ap1800-297214/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/001Basic.t .. 
ok 1 - checksum
ok 2 # skip LIVE_TESTS not set/dev/ttyUSB0
ok 3 # skip LIVE_TESTS not set/dev/ttyUSB0
1..3
ok
All tests successful.
Files=1, Tests=3,  1 wallclock secs ( 0.03 usr  0.00 sys +  0.14 cusr  0.02 csys =  0.19 CPU)
Result: PASS
  MSCHILLI/ZWave-Protocol-0.04.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="ZWave-Protocol" VERSION="0.04" DATE="2015-12-25">
  <AUTHOR CPAN="MSCHILLI">Michael Schilli &lt;m@perlmeister.com></AUTHOR>
  <ABSTRACT>Protocol helpers for Z-Wave communication</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.18"/>
  <CODEBASE HREF="ZWave-Protocol-0.04.tar.gz"/>
  <PROVIDE NAME="ZWave::Protocol" VERSION="0.04"/>
  <REQUIRE NAME="Device::SerialPort" VERSION="1.04"/>
  <REQUIRE NAME="Log::Log4perl" VERSION="1"/>
  <REQUIRE NAME="Moo::" VERSION="1.006"/>
  <!-- Built 2016-01-07 with ActivePerl-1800 on neko (Mac OS X 10.6.8) log ZWave-Protocol-0.04.d/log-20160107T091400.txt -->
</SOFTPKG>
>>> (cd /Users/fly1800/cpanfly-5.18/var/cpan/build/ZWave-Protocol-0.04-LXqivF && tar cvf - ZWave-Protocol-0.04.ppd blib) | gzip -c >/Users/fly1800/cpanfly-5.18/var/REPO/M/MS/MSCHILLI/ZWave-Protocol-0.04.tar.gz
ZWave-Protocol-0.04.ppd
blib/
blib/lib/
blib/lib/ZWave/
blib/lib/ZWave/Protocol.pm
blib/man3/
blib/man3/ZWave::Protocol.3
>>> mv /Users/fly1800/cpanfly-5.18/var/cpan/build/ZWave-Protocol-0.04-LXqivF/ZWave-Protocol-0.04.ppd /Users/fly1800/cpanfly-5.18/var/REPO/M/MS/MSCHILLI
Finished 2016-01-07T09:14:06