PATH=/usr/bin:/bin:/Users/fly1800/var/megalib/bin Start 2014-11-28T07:03:45 ActivePerl-1800 CPAN-2.00 Reading '/Users/fly1800/var/cpan/Metadata' Database was generated on Fri, 28 Nov 2014 14:17:02 GMT Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz Checksum for /data/cpan/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz ok Perinci-Sub-Complete-0.64/ Perinci-Sub-Complete-0.64/META.json Perinci-Sub-Complete-0.64/LICENSE Perinci-Sub-Complete-0.64/Changes Perinci-Sub-Complete-0.64/META.yml Perinci-Sub-Complete-0.64/Makefile.PL Perinci-Sub-Complete-0.64/t/ Perinci-Sub-Complete-0.64/t/release-pod-syntax.t Perinci-Sub-Complete-0.64/t/complete_cli_arg.t Perinci-Sub-Complete-0.64/t/complete_from_schema.t Perinci-Sub-Complete-0.64/t/release-pod-coverage.t Perinci-Sub-Complete-0.64/t/complete_arg_elem.t Perinci-Sub-Complete-0.64/t/complete_arg_val.t Perinci-Sub-Complete-0.64/t/release-rinci.t Perinci-Sub-Complete-0.64/t/00-compile.t Perinci-Sub-Complete-0.64/README Perinci-Sub-Complete-0.64/dist.ini Perinci-Sub-Complete-0.64/lib/ Perinci-Sub-Complete-0.64/lib/Perinci/ Perinci-Sub-Complete-0.64/lib/Perinci/Sub/ Perinci-Sub-Complete-0.64/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.64/MANIFEST Perinci-Sub-Complete-0.64/weaver.ini CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz >>> /Users/fly1800/ap1800-297214/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::Util 0.38 not found. We have 0.37. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz ---- Complete::Bash [build_requires] Perinci::Sub::Util [requires] Running make test Delayed until after prerequisites Running test for module 'Complete::Bash' Running make for P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz Checksum for /data/cpan/authors/id/P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz ok Complete-Bash-0.12/ Complete-Bash-0.12/META.json Complete-Bash-0.12/LICENSE Complete-Bash-0.12/Changes Complete-Bash-0.12/META.yml Complete-Bash-0.12/Makefile.PL Complete-Bash-0.12/t/ Complete-Bash-0.12/t/release-pod-syntax.t Complete-Bash-0.12/t/format_completion.t Complete-Bash-0.12/t/release-pod-coverage.t Complete-Bash-0.12/t/parse_cmdline.t Complete-Bash-0.12/t/release-rinci.t Complete-Bash-0.12/t/00-compile.t Complete-Bash-0.12/README Complete-Bash-0.12/dist.ini Complete-Bash-0.12/lib/ Complete-Bash-0.12/lib/Complete/ Complete-Bash-0.12/lib/Complete/Bash.pm Complete-Bash-0.12/MANIFEST Complete-Bash-0.12/weaver.ini CPAN.pm: Building P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz >>> /Users/fly1800/ap1800-297214/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Complete::Bash Writing MYMETA.yml and MYMETA.json >>> make cp lib/Complete/Bash.pm blib/lib/Complete/Bash.pm Manifying 1 pod document PERLANCAR/Complete-Bash-0.12.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly1800/ap1800-297214/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Complete/Bash.pm loaded ok ok t/format_completion.t ..... # Subtest: accepts array of str ok 1 1..1 ok 1 - accepts array of str # Subtest: accepts array of hashref ok 1 1..1 ok 2 - accepts array of hashref # Subtest: escmode default ok 1 1..1 ok 3 - escmode default # Subtest: escmode none ok 1 1..1 ok 4 - escmode none # Subtest: escmode shellvar ok 1 1..1 ok 5 - escmode shellvar # Subtest: as array ok 1 1..1 ok 6 - as array # Subtest: path_sep / ok 1 ok 2 1..2 ok 7 - path_sep / # Subtest: path_sep :: ok 1 ok 2 ok 3 1..3 ok 8 - path_sep :: 1..8 ok t/parse_cmdline.t ......... # Subtest: basic ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - basic # Subtest: whitespace before command ok 1 1..1 ok 2 - whitespace before command # Subtest: middle ok 1 ok 2 ok 3 1..3 ok 3 - middle # Subtest: escaped space ok 1 ok 2 ok 3 ok 4 1..4 ok 4 - escaped space # Subtest: double quotes ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 1..8 ok 5 - double quotes # Subtest: double quotes (preserve quotes) ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 1..8 ok 6 - double quotes (preserve quotes) # Subtest: single quotes ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - single quotes # Subtest: single quotes (preserve quotes) ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 8 - single quotes (preserve quotes) # Subtest: word breaks ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 1..9 ok 9 - word breaks 1..9 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=6, Tests=18, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.22 cusr 0.05 csys = 0.34 CPU) Result: PASS PERLANCAR/Complete-Bash-0.12.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Completion module for bash shell >>> (cd /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ && tar cvf - Complete-Bash-0.12.ppd blib) | gzip -c >/Users/fly1800/var/REPO/P/PE/PERLANCAR/Complete-Bash-0.12.tar.gz Complete-Bash-0.12.ppd blib/ blib/lib/ blib/lib/Complete/ blib/lib/Complete/Bash.pm blib/man3/ blib/man3/Complete::Bash.3 >>> mv /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/Complete-Bash-0.12.ppd /Users/fly1800/var/REPO/P/PE/PERLANCAR Running test for module 'Perinci::Sub::Util' Running make for P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz Prepending /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/arch /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/lib to PERL5LIB for 'get' Checksum for /data/cpan/authors/id/P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz ok Perinci-Sub-Util-0.40/ Perinci-Sub-Util-0.40/Changes Perinci-Sub-Util-0.40/LICENSE Perinci-Sub-Util-0.40/MANIFEST Perinci-Sub-Util-0.40/lib/ Perinci-Sub-Util-0.40/lib/Perinci/ Perinci-Sub-Util-0.40/lib/Perinci/Sub/ Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ResObj.pm Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/Sort.pm Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util.pm Perinci-Sub-Util-0.40/README Perinci-Sub-Util-0.40/META.json Perinci-Sub-Util-0.40/Makefile.PL Perinci-Sub-Util-0.40/dist.ini Perinci-Sub-Util-0.40/t/ Perinci-Sub-Util-0.40/t/release-rinci.t Perinci-Sub-Util-0.40/t/release-pod-coverage.t Perinci-Sub-Util-0.40/t/caller.t Perinci-Sub-Util-0.40/t/00-compile.t Perinci-Sub-Util-0.40/t/gen_modified_sub.t Perinci-Sub-Util-0.40/t/err.t Perinci-Sub-Util-0.40/t/release-pod-syntax.t Perinci-Sub-Util-0.40/weaver.ini Perinci-Sub-Util-0.40/META.yml Prepending /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/arch /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/lib to PERL5LIB for 'make' CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz >>> /Users/fly1800/ap1800-297214/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Util Writing MYMETA.yml and MYMETA.json >>> make cp lib/Perinci/Sub/Util/Sort.pm blib/lib/Perinci/Sub/Util/Sort.pm cp lib/Perinci/Sub/Util/ResObj.pm blib/lib/Perinci/Sub/Util/ResObj.pm cp lib/Perinci/Sub/Util.pm blib/lib/Perinci/Sub/Util.pm Manifying 3 pod documents PERLANCAR/Perinci-Sub-Util-0.40.tar.gz make -- OK Prepending /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/arch /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly1800/ap1800-297214/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..3 ok 1 - Perinci/Sub/Util.pm loaded ok ok 2 - Perinci/Sub/Util/ResObj.pm loaded ok ok 3 - Perinci/Sub/Util/Sort.pm loaded ok ok t/caller.t ................ ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 1..6 ok t/err.t ................... # Subtest: defaults ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message ok 6 - result ok 7 - result metadata is hash 1..7 ok 1 - defaults # Subtest: set status ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 400 1..4 ok 2 - set status # Subtest: set message ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message 1..5 ok 3 - set message # Subtest: set prev ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 400 ok 5 - message ok 6 - prev 1..6 ok 4 - set prev # Subtest: caller ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message ok 6 - log[0] type ok 7 - log[0] time ok 8 - log[0] package ok 9 - log[0] func ok 10 - log[0] line 1..10 ok 5 - caller # Subtest: stack_trace ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - stack_trace 1..5 ok 6 - stack_trace # Subtest: stack_trace only produced once ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 501 ok 5 - stack_trace 1..5 ok 7 - stack_trace only produced once 1..7 ok t/gen_modified_sub.t ...... ok 1 ok 2 1..2 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=7, Tests=18, 1 wallclock secs ( 0.05 usr 0.02 sys + 0.33 cusr 0.08 csys = 0.48 CPU) Result: PASS PERLANCAR/Perinci-Sub-Util-0.40.tar.gz make test TEST_VERBOSE=1 -- OK PPD for Perinci-Sub-Util-0.40 already made Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz Prepending /Users/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-be_paI/blib/arch /Users/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-be_paI/blib/lib /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/arch /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /Users/fly1800/var/cpan/build/Perinci-Sub-Complete-0.64-uqvMH9 Prepending /Users/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-be_paI/blib/arch /Users/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-be_paI/blib/lib /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/arch /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/lib to PERL5LIB for 'make' CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz >>> make cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz make -- OK Prepending /Users/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-be_paI/blib/arch /Users/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-be_paI/blib/lib /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/arch /Users/fly1800/var/cpan/build/Complete-Bash-0.12-2PyKlJ/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly1800/ap1800-297214/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok t/complete_cli_arg.t ...... # Subtest: arg name (no dash) ok 1 - result 1..1 ok 1 - arg name (no dash) # Subtest: arg name 2 (dash) ok 1 - result 1..1 ok 2 - arg name 2 (dash) # Subtest: arg name 3 (sole completion) ok 1 - result 1..1 ok 3 - arg name 3 (sole completion) # Subtest: arg name 3 (unknown option) ok 1 - result 1..1 ok 4 - arg name 3 (unknown option) # Subtest: arg value (schema) ok 1 - result 1..1 ok 5 - arg value (schema) # Subtest: arg value (spec "completion") ok 1 - result 1..1 ok 6 - arg value (spec "completion") # Subtest: arg value, pos ok 1 - result 1..1 ok 7 - arg value, pos # Subtest: arg value, pos + greedy ok 1 - result 1..1 ok 8 - arg value, pos + greedy # Subtest: custom completion (option value for function arg) ok 1 - result 1..1 ok 9 - custom completion (option value for function arg) # Subtest: custom completion (option value for common option) ok 1 - result 1..1 ok 10 - custom completion (option value for common option) # Subtest: custom completion (option value, unknown option) ok 1 - result 1..1 ok 11 - custom completion (option value, unknown option) # Subtest: custom completion (positional cli arg with no matching function arg) ok 1 - result 1..1 ok 12 - custom completion (positional cli arg with no matching function arg) # Subtest: custom completion (positional cli arg for non-greedy arg) ok 1 - result 1..1 ok 13 - custom completion (positional cli arg for non-greedy arg) # Subtest: custom completion (positional cli arg for greedy arg) ok 1 - result 1..1 ok 14 - custom completion (positional cli arg for greedy arg) 1..14 ok t/complete_from_schema.t .. # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 1 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 2 - float 1..2 ok t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing All tests successful. Files=8, Tests=19, 1 wallclock secs ( 0.06 usr 0.03 sys + 0.42 cusr 0.08 csys = 0.59 CPU) Result: PASS PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Complete command-line argument using Rinci metadata >>> (cd /Users/fly1800/var/cpan/build/Perinci-Sub-Complete-0.64-uqvMH9 && tar cvf - Perinci-Sub-Complete-0.64.ppd blib) | gzip -c >/Users/fly1800/var/REPO/P/PE/PERLANCAR/Perinci-Sub-Complete-0.64.tar.gz Perinci-Sub-Complete-0.64.ppd blib/ blib/lib/ blib/lib/Perinci/ blib/lib/Perinci/Sub/ blib/lib/Perinci/Sub/Complete.pm blib/man3/ blib/man3/Perinci::Sub::Complete.3 >>> mv /Users/fly1800/var/cpan/build/Perinci-Sub-Complete-0.64-uqvMH9/Perinci-Sub-Complete-0.64.ppd /Users/fly1800/var/REPO/P/PE/PERLANCAR Finished 2014-11-28T07:03:55