PATH=/usr/bin:/bin:/Users/fly2000/cpanfly-5.20/var/megalib/bin Start 2017-01-04T10:25:40 ActivePerl-2000 CPAN-2.10 Reading '/Users/fly2000/cpanfly-5.20/var/cpan/Metadata' Database was generated on Wed, 04 Jan 2017 06:41:03 GMT Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/F/FE/FELIPE/Math-ProvablePrime-0.043.tar.gz ok Math-ProvablePrime-0.043/ Math-ProvablePrime-0.043/.gitignore Math-ProvablePrime-0.043/Changes Math-ProvablePrime-0.043/lib/ Math-ProvablePrime-0.043/Makefile.PL Math-ProvablePrime-0.043/MANIFEST Math-ProvablePrime-0.043/META.json Math-ProvablePrime-0.043/META.yml Math-ProvablePrime-0.043/README.pod Math-ProvablePrime-0.043/t/ Math-ProvablePrime-0.043/t/Math-ProvablePrime-Rand.t Math-ProvablePrime-0.043/t/Math-ProvablePrime.t Math-ProvablePrime-0.043/lib/Math/ Math-ProvablePrime-0.043/lib/Math/ProvablePrime/ Math-ProvablePrime-0.043/lib/Math/ProvablePrime.pm Math-ProvablePrime-0.043/lib/Math/ProvablePrime/Rand.pm Configuring F/FE/FELIPE/Math-ProvablePrime-0.043.tar.gz with Makefile.PL >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2000/cpanfly-5.20/var/megalib Want /Users/fly2000/ap2000-298465/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Math::ProvablePrime Writing MYMETA.yml and MYMETA.json FELIPE/Math-ProvablePrime-0.043.tar.gz /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK Running make for F/FE/FELIPE/Math-ProvablePrime-0.043.tar.gz ---- Unsatisfied dependencies detected during ---- ---- FELIPE/Math-ProvablePrime-0.043.tar.gz ---- Test::Class [build_requires] Running test for module 'Test::Class' Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/E/ET/ETHER/Test-Class-0.50.tar.gz ok Test-Class-0.50/ Test-Class-0.50/Changes Test-Class-0.50/MANIFEST Test-Class-0.50/META.json Test-Class-0.50/META.yml Test-Class-0.50/Makefile.PL Test-Class-0.50/README Test-Class-0.50/lib/ Test-Class-0.50/t/ Test-Class-0.50/xt/ Test-Class-0.50/xt/documented.t Test-Class-0.50/xt/meta.t Test-Class-0.50/xt/perlcritic.t Test-Class-0.50/xt/perlcriticrc Test-Class-0.50/xt/pmv.t Test-Class-0.50/xt/pod.t Test-Class-0.50/xt/spelling.t Test-Class-0.50/t/00-load.t Test-Class-0.50/t/20-load-classes.t Test-Class-0.50/t/21-load-subclassed.t Test-Class-0.50/t/TestClassLoadSubclass.pm Test-Class-0.50/t/Tests.t Test-Class-0.50/t/_new.t Test-Class-0.50/t/bad-autoloads.t Test-Class-0.50/t/bailout.t Test-Class-0.50/t/builder.t Test-Class-0.50/t/compile.t Test-Class-0.50/t/current_method.t Test-Class-0.50/t/diag_on_failure.t Test-Class-0.50/t/die-in-setup.t Test-Class-0.50/t/die_before_plan.t Test-Class-0.50/t/expected_tests.t Test-Class-0.50/t/fail1.t Test-Class-0.50/t/fail2.t Test-Class-0.50/t/fail3.t Test-Class-0.50/t/filter.t Test-Class-0.50/t/filter_bad_filter.t Test-Class-0.50/t/filter_fixtures.t Test-Class-0.50/t/filter_fixtures_only.t Test-Class-0.50/t/filter_multiple.t Test-Class-0.50/t/header.t Test-Class-0.50/t/late_header.t Test-Class-0.50/t/methodinfo.t Test-Class-0.50/t/named_test.t Test-Class-0.50/t/num_method_tests.t Test-Class-0.50/t/num_tests.t Test-Class-0.50/t/override.t Test-Class-0.50/t/rt15870.t Test-Class-0.50/t/rt17264.t Test-Class-0.50/t/run_all_tests.t Test-Class-0.50/t/runtests.t Test-Class-0.50/t/runtests_die.t Test-Class-0.50/t/runtests_die_empty.t Test-Class-0.50/t/runtests_die_nearlyempty.t Test-Class-0.50/t/runtests_extra.t Test-Class-0.50/t/runtests_noplan.t Test-Class-0.50/t/runtests_of.t Test-Class-0.50/t/runtests_result.t Test-Class-0.50/t/runtests_return.t Test-Class-0.50/t/runtests_trailing.t Test-Class-0.50/t/runtests_with_wrong_class.t Test-Class-0.50/t/show_plan_in_shutdown.t Test-Class-0.50/t/skip1.t Test-Class-0.50/t/skip2.t Test-Class-0.50/t/skip_class_reason.t Test-Class-0.50/t/skip_empty_classes.t Test-Class-0.50/t/spaces.t Test-Class-0.50/t/startup.t Test-Class-0.50/t/startup_that_dies.t Test-Class-0.50/t/teardown-when-test-dies.t Test-Class-0.50/t/test-libs/ Test-Class-0.50/t/test_classes.t Test-Class-0.50/t/test_deep.t Test-Class-0.50/t/test_method.t Test-Class-0.50/t/test_verbose.t Test-Class-0.50/t/todo.t Test-Class-0.50/t/test-libs/fail/ Test-Class-0.50/t/test-libs/lib1/ Test-Class-0.50/t/test-libs/lib2/ Test-Class-0.50/t/test-libs/lib3/ Test-Class-0.50/t/test-libs/lib3/Tests/ Test-Class-0.50/t/test-libs/lib3/Tests/Bad1.pm Test-Class-0.50/t/test-libs/lib3/Tests/Good1.pm Test-Class-0.50/t/test-libs/lib3/Tests/Good2.pm Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/ Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Bad2.pm Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Good3.pm Test-Class-0.50/t/test-libs/lib2/MyTest/ Test-Class-0.50/t/test-libs/lib2/MyTest/Baz.pm Test-Class-0.50/t/test-libs/lib1/Tests/ Test-Class-0.50/t/test-libs/lib1/Tests/Foo/ Test-Class-0.50/t/test-libs/lib1/Tests/Foo.pm Test-Class-0.50/t/test-libs/lib1/Tests/Foo/Bar.pm Test-Class-0.50/t/test-libs/fail/MyFail.pm Test-Class-0.50/lib/Test/ Test-Class-0.50/lib/Test/Class/ Test-Class-0.50/lib/Test/Class.pm Test-Class-0.50/lib/Test/Class/Load.pm Test-Class-0.50/lib/Test/Class/MethodInfo.pm Configuring E/ET/ETHER/Test-Class-0.50.tar.gz with Makefile.PL >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2000/cpanfly-5.20/var/megalib Want /Users/fly2000/ap2000-298465/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Test::Class Writing MYMETA.yml and MYMETA.json ETHER/Test-Class-0.50.tar.gz /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK Running make for E/ET/ETHER/Test-Class-0.50.tar.gz >>> make cp lib/Test/Class/Load.pm blib/lib/Test/Class/Load.pm cp lib/Test/Class.pm blib/lib/Test/Class.pm cp lib/Test/Class/MethodInfo.pm blib/lib/Test/Class/MethodInfo.pm Manifying 3 pod documents ETHER/Test-Class-0.50.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Test::Class::Load 0.50, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic t/00-load.t .................... 1..1 ok 1 - use Test::Class::Load; ok t/20-load-classes.t ............ 1..14 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should tests in subdirectories ok 3 - ... and the methods should work correctly ok 4 - ... even if they are called from subclasses ok 5 - ... or they have their own methods ok 6 - Trying to load multiple lib paths should succeed ok 7 - Top level directories should be loaded even with multiple libs ok 8 - ... as should tests in subdirectories ok 9 - ... and the methods should work correctly ok 10 - ... even if they are called from subclasses ok 11 - ... or they have their own methods ok 12 - And secondary libs should be loaded ok 13 - ... and their methods should also work correctly ok 14 - Trying to load a bad module fails ok t/21-load-subclassed.t ......... 1..7 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should classes in subdirectories ok 3 - Filtered out classes in top level directories should *not* be loaded ok 4 - Filtered out classes in subdirectories should *not* be loaded ok 5 - Class Tests::Good1 method work as expected ok 6 - Class Tests::Good2 method work as expected ok 7 - Class Tests::Subdir::Good3 method work as expected ok t/_new.t ....................... 1..6 ok 1 - use Test::Class; ok 2 - An object of class 'Foo' isa 'Test::Class' ok 3 - key/value set ok 4 - An object of class 'Foo' isa 'Test::Class' ok 5 - prototype key/value set ok 6 - new key/value set ok t/bad-autoloads.t .............. 1..2 ok 1 - use Test::Class; ok 2 - avoided warnings from Contextual::Return::Value ok t/bailout.t .................... 1..2 ok 1 - bailout works ok 2 - exit value okay ok t/builder.t .................... 1..1 ok 1 - builder ok t/compile.t .................... 1..2 ok 1 - cannot test anon sub ok 2 - bad number detected ok # # Local::Test->test t/current_method.t ............. 1..4 ok 1 - current_method in setup ok 2 - current_method in method ok 3 - current_method in teardown ok 4 - current_test outside runtests ok t/diag_on_failure.t ............ 1..1 ok 1 - we show the test class and method name on test failure ok t/die-in-setup.t ............... 1..1 ok 1 - die in setup caused test method to fail ok t/die_before_plan.t ............ 1..1 ok 1 - die before plan ok t/expected_tests.t ............. 1..10 ok 1 - all set ok 2 - no_plan setup ok 3 - no_plan test ok 4 - no_plan teardown ok 5 - no_plan startup ok 6 - no_plan shutdown ok 7 - expected_test_of ok 8 - no_plan expected_test_of ok 9 - bad test class ok 10 - undef test class ok t/fail1.t ...................... 1..2 ok 1 - FAIL_ALL with plan ok 2 - exit value okay ok t/fail2.t ...................... 1..2 ok 1 - fail2 ok 2 - exit value okay ok t/fail3.t ...................... ok 1 - FAIL_ALL with no plan ok 2 - exit value okay 1..2 ok # # Foo->test_run t/filter.t ..................... 1..1 ok 1 - test_run not filtered, so is run ok t/filter_bad_filter.t .......... 1..1 ok 1 - error on non-coderef filter ok # # Foo->test_should_run t/filter_fixtures.t ............ 1..5 ok 1 - startup test is run, even though matches filter ok 2 - setup test is run, even though matches filter ok 3 - should run, due to not matching filter ok 4 - teardown test is run, even though matches filter ok 5 - shutdown test is run, even though matches filter ok t/filter_fixtures_only.t ....... 1..1 ok 1 - setup/teardown not run when no test methods ok # # Foo->test_another_not_matching # # Foo->test_not_filtered t/filter_multiple.t ............ 1..2 ok 1 - test_another_not_matching doesn't meet any filters, so is run ok 2 - test_not_filtered doesn't meet any filters, so is run ok t/header.t ..................... ok 1 - no duplicate headers 1..1 ok # # Local::Test->test t/late_header.t ................ 1..2 ok 1 - test number set ok 2 - builder expected tests set ok t/methodinfo.t ................. ok 1 - use Test::Class::MethodInfo; ok 2 - An object of class 'Test::Class::MethodInfo' isa 'Test::Class::MethodInfo' ok 3 - method type is test by default ok 4 - test methods default to 1 test 1..4 ok t/named_test.t ................. ok 1 - test names set to method name by default 1..1 ok # # Bar->no_plan_test # # Bar->no_plan_test2 # # Bar->two_tests t/num_method_tests.t ........... 1..19 ok 1 - fixed num tests ok 2 - no_plan tests ok 3 - cannot use non-method ok 4 - cannot update illegal value ok 5 - updated legal value ok 6 - update worked ok 7 - updated extended ok 8 - update worked ok 9 - extended method okay ok 10 - class expected_tests ok 11 - object expected_tests ok 12 - num_method_tests dies outside test class ok 13 - just passing ok 14 - no_plan_test just passing 1 ok 15 - no_plan_test just passing 2 ok 16 - no_plan_test2 just passing 1 ok 17 - no_plan_test2 just passing 2 ok 18 - two_tests just passing 1 ok 19 - two_tests just passing 2 ok # # Foo->test_num_tests # # Foo->test_num_tests t/num_tests.t .................. 1..4 ok 1 - num_tests access okay ok 2 - num_tests set okay ok 3 - num_tests access okay ok 4 - num_tests set okay ok t/override.t ................... 1..1 ok 1 - cannot override a public method with a test method ok t/rt15870.t .................... 1..1 ok 1 - sensible error if new() is overridden ok t/rt17264.t .................... 1..1 ok 1 - we figured out that we loaded Test::Class too late ok # # A::Test->setup t/run_all_tests.t .............. 1..5 ok 1 - Test::Class->SKIP_CLASS default ok 2 - Base::Test->SKIP_CLASS overridden ok 3 - A::Test->SKIP_CLASS default ok 4 - non skipping test class run as expected ok 5 - runtests skipped classes with SKIP_CLASS set ok # # Bar->test1 # # Bar->test2 t/runtests.t ................... 1..18 ok 1 - initialise2: methods ran in order ok 2 - test1: initialise1 ran once ok 3 - test1: initialise2 ran once ok 4 - test1: first test running ok 5 - test1: teardown not run ok 6 - teardown1: teardown run for every test ok 7 - teardown1: teardown run for every initialise1 ok 8 - teardown1: teardown run for every initialise2 ok 9 - teardown1: setup run for every test ok 10 - initialise2: methods ran in order ok 11 - test2: initialise1 ran twice ok 12 - test2: initialise2 ran twice ok 13 - test2: second test running ok 14 - test2: teardown ran once ok 15 - teardown1: teardown run for every test ok 16 - teardown1: teardown run for every initialise1 ok 17 - teardown1: teardown run for every initialise2 ok 18 - teardown1: setup run for every test ok t/runtests_die.t ............... 1..1 ok 1 - early die handled ok t/runtests_die_empty.t ......... 1..1 ok 1 - we can handle an exception that stringifies to the empty string ok t/runtests_die_nearlyempty.t ... 1..1 ok 1 - early die with nearly-empty messages handled ok t/runtests_extra.t ............. 1..1 ok 1 - extra test detected ok # # Foo->set_tests # # Foo->undef_tests t/runtests_noplan.t ............ ok 1 - this should pass ok 2 - runtime test 1 ok 3 - runtime test 2 ok 4 - expected number of tests ran 1..4 ok # # Tests1->test # # Tests2->test t/runtests_of.t ................ 1..3 ok 1 - Tests1 test ok 2 - Tests2 test ok 3 - correct number of tests ok t/runtests_result.t ............ 1..4 ok 1 - single failure ran okay ok 2 - failure detected ok 3 - a successful test ok 4 - success detected ok t/runtests_return.t ............ 1..2 ok 1 - early return handled (skip) ok 2 - early return handled (fail) ok t/runtests_trailing.t .......... 1..1 ok 1 - trailing expection detected ok t/runtests_with_wrong_class.t .. 1..2 ok 1 - use Test::Class; ok 2 - runtests dies if we are given something that is not a test class ok # # My::Test->test t/show_plan_in_shutdown.t ...... 1..2 ok 1 - passing test to force shutdown method to run ok 2 - shutdown method has run ok t/skip1.t ...................... 1..1 ok 1 - SKIP_ALL called skip_all ok # Failed test 'SKIP_ALL' # at t/skip2.t line 40. # (in Local::Test->_only) # STDERR is: # # # # Local::Test->test # # not: # # as expected t/skip2.t ...................... 1..4 not ok 1 - SKIP_ALL ok 2 - exit ok ok 3 - make the plan happy ok 4 - make the plan happy Failed 1/4 subtests t/skip_class_reason.t .......... 1..3 # Running under perl version 5.020001 for darwin # Current time local: Wed Jan 4 10:25:48 2017 # Current time GMT: Wed Jan 4 18:25:48 2017 # Using Test.pm version 1.26 ok 1 ok 2 ok 3 ok # # Bar::Test->the_test t/skip_empty_classes.t ......... 1..5 ok 1 - startup run ok 2 - setup run ok 3 - the_test has been run ok 4 - teardown run ok 5 - shutdown run ok t/spaces.t ..................... ok 1 - can have spaces around attributes 1..1 ok # # Foo::Test->test1 # # Foo::Test->test2 t/startup.t .................... 1..15 ok 1 - called start1 ok 2 - called start2 ok 3 - called setup1 ok 4 - called setup2 ok 5 - called test1 ok 6 - called tear1 ok 7 - called tear2 ok 8 - called setup1 ok 9 - called setup2 ok 10 - called test2 ok 11 - called tear1 ok 12 - called tear2 ok 13 - called end1 ok 14 - called end2 ok 15 - all expected methods ran ok t/startup_that_dies.t .......... 1..1 ok 1 - exception in startup method causes all tests to be skipped ok # Failed test 'exception in method, but teardown is still run' # at t/teardown-when-test-dies.t line 29. # STDERR is: # # # # TeardownWhenTestDies->my_test_method # # Failed test 'my_test_method died (oops! at t/teardown-when-test-dies.t line 15.)' # # at t/teardown-when-test-dies.t line 28. # # (in TeardownWhenTestDies->my_test_method) # # not: # /#\s+Failed\ test.*?\n?.*?at\ t\/teardown\-when\-test\-dies\.t line 28.*\n?/ # # (in TeardownWhenTestDies->my_test_method) # # as expected t/teardown-when-test-dies.t .... 1..1 not ok 1 - exception in method, but teardown is still run Failed 1/1 subtests t/test_classes.t ............... 1..1 ok 1 - _test_classes deals with undef values ok t/test_deep.t .................. 1..1 ok 1 - Test::Deep is not included as a test class, even though isa always returns true ok t/test_method.t ................ 1..4 ok 1 - $ENV{TEST_METHOD} with an invalid regex should die ok 2 - no TEST_METHOD runs all tests ok 3 - single match just runs one test ok 4 - two matches run both tests ok t/test_verbose.t ............... 1..1 ok 1 - TEST_VERBOSE outputs method diagnostic ok # # My::Test->Tests_attribute_default_number_of_tests # # My::Test->Tests_attribute_set_number_of_tests t/Tests.t ...................... 1..2 ok 1 - Tests attribute default number of tests ok 2 - Tests attribute set number of tests ok # Test::More: 1.001009 t/todo.t ....................... 1..2 ok 1 - todo tests work ok 2 - todo_test should run 1 test ok Test Summary Report ------------------- t/skip2.t (Wstat: 0 Tests: 4 Failed: 1) Failed test: 1 t/teardown-when-test-dies.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Files=57, Tests=189, 5 wallclock secs ( 0.23 usr 0.15 sys + 3.81 cusr 0.65 csys = 4.84 CPU) Result: FAIL Failed 2/57 test programs. 2/189 subtests failed. make: *** [test_dynamic] Error 255 ETHER/Test-Class-0.50.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ETHER/Test-Class-0.50.tar.gz FELIPE/Math-ProvablePrime-0.043.tar.gz Has already been unwrapped into directory /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT FELIPE/Math-ProvablePrime-0.043.tar.gz Has already been prepared Running make for F/FE/FELIPE/Math-ProvablePrime-0.043.tar.gz Warning: Prerequisite 'Test::Class => 0.4' for 'FELIPE/Math-ProvablePrime-0.043.tar.gz' failed when processing 'ETHER/Test-Class-0.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Math/ProvablePrime.pm blib/lib/Math/ProvablePrime.pm cp lib/Math/ProvablePrime/Rand.pm blib/lib/Math/ProvablePrime/Rand.pm cp README.pod blib/lib/Math/README.pod Manifying 2 pod documents FELIPE/Math-ProvablePrime-0.043.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t Can't locate Test/Class.pm in @INC (you may need to install the Test::Class module) (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/t/../lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .) at /Users/fly2000/cpanfly-5.20/var/megalib/parent.pm line 16. BEGIN failed--compilation aborted at t/Math-ProvablePrime-Rand.t line 20. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 2 just after 1. t/Math-ProvablePrime-Rand.t .. ok 1 - no warnings Dubious, test returned 2 (wstat 512, 0x200) All 1 subtests passed Can't locate Test/Class.pm in @INC (you may need to install the Test::Class module) (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/t/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/t/../lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Math-ProvablePrime-0.043-iplDtT/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .) at /Users/fly2000/cpanfly-5.20/var/megalib/parent.pm line 16. BEGIN failed--compilation aborted at t/Math-ProvablePrime.t line 25. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 2 just after 1. t/Math-ProvablePrime.t ....... ok 1 - no warnings Dubious, test returned 2 (wstat 512, 0x200) All 1 subtests passed Test Summary Report ------------------- t/Math-ProvablePrime-Rand.t (Wstat: 512 Tests: 1 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Math-ProvablePrime.t (Wstat: 512 Tests: 1 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=2, Tests=2, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.13 cusr 0.02 csys = 0.19 CPU) Result: FAIL Failed 2/2 test programs. 0/2 subtests failed. make: *** [test_dynamic] Error 2 FELIPE/Math-ProvablePrime-0.043.tar.gz one dependency not OK (Test::Class); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports FELIPE/Math-ProvablePrime-0.043.tar.gz Finished 2017-01-04T10:25:51