PATH=/usr/bin:/bin:/Users/fly2000/var/megalib/bin Start 2015-05-01T10:03:03 ActivePerl-2000 CPAN-2.00 Reading '/Users/fly2000/var/cpan/Metadata' Database was generated on Fri, 01 May 2015 05:41:02 GMT Running make for K/KA/KARMAN/Dezi-0.004002.tar.gz Checksum for /data/cpan/authors/id/K/KA/KARMAN/Dezi-0.004002.tar.gz ok Dezi-0.004002/ Dezi-0.004002/bin/ Dezi-0.004002/bin/dezi Dezi-0.004002/t/ Dezi-0.004002/t/example-config.pl Dezi-0.004002/t/pod-coverage.t Dezi-0.004002/t/00-load.t Dezi-0.004002/t/002-mem-leak.t Dezi-0.004002/t/001-server.t Dezi-0.004002/t/pod.t Dezi-0.004002/inc/ Dezi-0.004002/inc/Module/ Dezi-0.004002/inc/Module/Install/ Dezi-0.004002/inc/Module/Install/MakeMaker.pm Dezi-0.004002/inc/Module/Install/Metadata.pm Dezi-0.004002/inc/Module/Install/Base.pm Dezi-0.004002/inc/Module/Install/Makefile.pm Dezi-0.004002/inc/Module/Install/Scripts.pm Dezi-0.004002/inc/Module/Install.pm Dezi-0.004002/lib/ Dezi-0.004002/lib/Dezi/ Dezi-0.004002/lib/Dezi/Tutorial.pod Dezi-0.004002/lib/Dezi/Server/ Dezi-0.004002/lib/Dezi/Server/About.pm Dezi-0.004002/lib/Dezi/Server.pm Dezi-0.004002/lib/Dezi/Config.pm Dezi-0.004002/lib/Dezi/Architecture.pod Dezi-0.004002/lib/Dezi.pm Dezi-0.004002/META.yml Dezi-0.004002/Makefile.PL Dezi-0.004002/MANIFEST Dezi-0.004002/README Dezi-0.004002/Changes CPAN.pm: Building K/KA/KARMAN/Dezi-0.004002.tar.gz >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Cannot determine perl version info from lib/Dezi.pm Warning: prerequisite Search::OpenSearch 0.400 not found. Warning: prerequisite Search::OpenSearch::Engine::Lucy 0.400 not found. Warning: prerequisite Search::OpenSearch::Server 0.300 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Dezi Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- KARMAN/Dezi-0.004002.tar.gz ---- Search::OpenSearch::Server [requires] Search::OpenSearch::Engine::Lucy [requires] Search::OpenSearch [requires] Running make test Delayed until after prerequisites Running test for module 'Search::OpenSearch::Server' Running make for K/KA/KARMAN/Search-OpenSearch-Server-0.300.tar.gz Checksum for /data/cpan/authors/id/K/KA/KARMAN/Search-OpenSearch-Server-0.300.tar.gz ok Search-OpenSearch-Server-0.300/ Search-OpenSearch-Server-0.300/Changes Search-OpenSearch-Server-0.300/inc/ Search-OpenSearch-Server-0.300/lib/ Search-OpenSearch-Server-0.300/Makefile.PL Search-OpenSearch-Server-0.300/MANIFEST Search-OpenSearch-Server-0.300/META.yml Search-OpenSearch-Server-0.300/README Search-OpenSearch-Server-0.300/t/ Search-OpenSearch-Server-0.300/t/00-load.t Search-OpenSearch-Server-0.300/t/01-plack.t Search-OpenSearch-Server-0.300/t/02-mem-leak.t Search-OpenSearch-Server-0.300/t/03-catalyst.t Search-OpenSearch-Server-0.300/t/lib/ Search-OpenSearch-Server-0.300/t/pod-coverage.t Search-OpenSearch-Server-0.300/t/pod.t Search-OpenSearch-Server-0.300/t/lib/MyApp/ Search-OpenSearch-Server-0.300/t/lib/MyApp/lib/ Search-OpenSearch-Server-0.300/t/lib/MyApp/script/ Search-OpenSearch-Server-0.300/t/lib/MyApp/script/myapp_server.pl Search-OpenSearch-Server-0.300/t/lib/MyApp/lib/MyApp/ Search-OpenSearch-Server-0.300/t/lib/MyApp/lib/MyApp.pm Search-OpenSearch-Server-0.300/t/lib/MyApp/lib/MyApp/Controller/ Search-OpenSearch-Server-0.300/t/lib/MyApp/lib/MyApp/Controller/Root.pm Search-OpenSearch-Server-0.300/t/lib/MyApp/lib/MyApp/Controller/SOS.pm Search-OpenSearch-Server-0.300/lib/CatalystX/ Search-OpenSearch-Server-0.300/lib/Search/ Search-OpenSearch-Server-0.300/lib/Search/OpenSearch/ Search-OpenSearch-Server-0.300/lib/Search/OpenSearch/Result.pm Search-OpenSearch-Server-0.300/lib/Search/OpenSearch/Server/ Search-OpenSearch-Server-0.300/lib/Search/OpenSearch/Server.pm Search-OpenSearch-Server-0.300/lib/Search/OpenSearch/Server/Catalyst.pm Search-OpenSearch-Server-0.300/lib/Search/OpenSearch/Server/Plack.pm Search-OpenSearch-Server-0.300/lib/CatalystX/Controller/ Search-OpenSearch-Server-0.300/lib/CatalystX/Controller/OpenSearch.pm Search-OpenSearch-Server-0.300/inc/Module/ Search-OpenSearch-Server-0.300/inc/Module/Install/ Search-OpenSearch-Server-0.300/inc/Module/Install.pm Search-OpenSearch-Server-0.300/inc/Module/Install/Base.pm Search-OpenSearch-Server-0.300/inc/Module/Install/Makefile.pm Search-OpenSearch-Server-0.300/inc/Module/Install/MakeMaker.pm Search-OpenSearch-Server-0.300/inc/Module/Install/Metadata.pm CPAN.pm: Building K/KA/KARMAN/Search-OpenSearch-Server-0.300.tar.gz >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Warning: prerequisite Search::OpenSearch 0.400 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Search::OpenSearch::Server Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- KARMAN/Search-OpenSearch-Server-0.300.tar.gz ---- Search::OpenSearch [requires] Running make test Delayed until after prerequisites Running test for module 'Search::OpenSearch' Running make for K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz Checksum for /data/cpan/authors/id/K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz ok Search-OpenSearch-0.407/ Search-OpenSearch-0.407/Changes Search-OpenSearch-0.407/inc/ Search-OpenSearch-0.407/lib/ Search-OpenSearch-0.407/Makefile.PL Search-OpenSearch-0.407/MANIFEST Search-OpenSearch-0.407/META.yml Search-OpenSearch-0.407/README Search-OpenSearch-0.407/t/ Search-OpenSearch-0.407/t/00-load.t Search-OpenSearch-0.407/t/01-client.t Search-OpenSearch-0.407/t/02-response.t Search-OpenSearch-0.407/t/03-mem-leak.t Search-OpenSearch-0.407/t/04-types.t Search-OpenSearch-0.407/t/pod-coverage.t Search-OpenSearch-0.407/t/pod.t Search-OpenSearch-0.407/lib/Search/ Search-OpenSearch-0.407/lib/Search/OpenSearch/ Search-OpenSearch-0.407/lib/Search/OpenSearch.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Engine.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Facets.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Response/ Search-OpenSearch-0.407/lib/Search/OpenSearch/Response.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Types.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Response/ExtJS.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Response/JSON.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Response/Tiny.pm Search-OpenSearch-0.407/lib/Search/OpenSearch/Response/XML.pm Search-OpenSearch-0.407/inc/Module/ Search-OpenSearch-0.407/inc/Module/Install/ Search-OpenSearch-0.407/inc/Module/Install.pm Search-OpenSearch-0.407/inc/Module/Install/Base.pm Search-OpenSearch-0.407/inc/Module/Install/Makefile.pm Search-OpenSearch-0.407/inc/Module/Install/MakeMaker.pm Search-OpenSearch-0.407/inc/Module/Install/Metadata.pm CPAN.pm: Building K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Warning: prerequisite CHI 0 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Search::OpenSearch Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- KARMAN/Search-OpenSearch-0.407.tar.gz ---- CHI [requires] Running make test Delayed until after prerequisites Running test for module 'CHI' Running make for J/JS/JSWARTZ/CHI-0.59.tar.gz Checksum for /data/cpan/authors/id/J/JS/JSWARTZ/CHI-0.59.tar.gz ok CHI-0.59/ CHI-0.59/Changes CHI-0.59/etc/ CHI-0.59/etc/bench/ CHI-0.59/etc/bench/bench.pl CHI-0.59/INSTALL CHI-0.59/lib/ CHI-0.59/lib/CHI/ CHI-0.59/lib/CHI/Benchmarks.pod CHI-0.59/lib/CHI/CacheObject.pm CHI-0.59/lib/CHI/Constants.pm CHI-0.59/lib/CHI/Driver/ CHI-0.59/lib/CHI/Driver/Base/ CHI-0.59/lib/CHI/Driver/Base/CacheContainer.pm CHI-0.59/lib/CHI/Driver/CacheCache.pm CHI-0.59/lib/CHI/Driver/Development.pod CHI-0.59/lib/CHI/Driver/FastMmap.pm CHI-0.59/lib/CHI/Driver/File.pm CHI-0.59/lib/CHI/Driver/Memory.pm CHI-0.59/lib/CHI/Driver/Metacache.pm CHI-0.59/lib/CHI/Driver/Null.pm CHI-0.59/lib/CHI/Driver/RawMemory.pm CHI-0.59/lib/CHI/Driver/Role/ CHI-0.59/lib/CHI/Driver/Role/HasSubcaches.pm CHI-0.59/lib/CHI/Driver/Role/IsSizeAware.pm CHI-0.59/lib/CHI/Driver/Role/IsSubcache.pm CHI-0.59/lib/CHI/Driver/Role/Universal.pm CHI-0.59/lib/CHI/Driver.pm CHI-0.59/lib/CHI/Serializer/ CHI-0.59/lib/CHI/Serializer/JSON.pm CHI-0.59/lib/CHI/Serializer/Storable.pm CHI-0.59/lib/CHI/Stats.pm CHI-0.59/lib/CHI/t/ CHI-0.59/lib/CHI/t/Bugs.pm CHI-0.59/lib/CHI/t/Config.pm CHI-0.59/lib/CHI/t/Constants.pm CHI-0.59/lib/CHI/t/Driver/ CHI-0.59/lib/CHI/t/Driver/CacheCache.pm CHI-0.59/lib/CHI/t/Driver/FastMmap.pm CHI-0.59/lib/CHI/t/Driver/File/ CHI-0.59/lib/CHI/t/Driver/File/DepthZero.pm CHI-0.59/lib/CHI/t/Driver/File.pm CHI-0.59/lib/CHI/t/Driver/Memory.pm CHI-0.59/lib/CHI/t/Driver/NonMoose.pm CHI-0.59/lib/CHI/t/Driver/RawMemory.pm CHI-0.59/lib/CHI/t/Driver/Subcache/ CHI-0.59/lib/CHI/t/Driver/Subcache/l1_cache.pm CHI-0.59/lib/CHI/t/Driver/Subcache/mirror_cache.pm CHI-0.59/lib/CHI/t/Driver/Subcache.pm CHI-0.59/lib/CHI/t/Driver.pm CHI-0.59/lib/CHI/t/GetError.pm CHI-0.59/lib/CHI/t/Initialize.pm CHI-0.59/lib/CHI/t/Null.pm CHI-0.59/lib/CHI/t/RequiredModules.pm CHI-0.59/lib/CHI/t/Sanity.pm CHI-0.59/lib/CHI/t/SetError.pm CHI-0.59/lib/CHI/t/Subcache.pm CHI-0.59/lib/CHI/t/Subclass.pm CHI-0.59/lib/CHI/t/Util.pm CHI-0.59/lib/CHI/Test/ CHI-0.59/lib/CHI/Test/Class.pm CHI-0.59/lib/CHI/Test/Driver/ CHI-0.59/lib/CHI/Test/Driver/NonMoose.pm CHI-0.59/lib/CHI/Test/Driver/Readonly.pm CHI-0.59/lib/CHI/Test/Driver/Role/ CHI-0.59/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm CHI-0.59/lib/CHI/Test/Driver/Writeonly.pm CHI-0.59/lib/CHI/Test/Util.pm CHI-0.59/lib/CHI/Test.pm CHI-0.59/lib/CHI/Types.pm CHI-0.59/lib/CHI/Util.pm CHI-0.59/lib/CHI.pm CHI-0.59/LICENSE CHI-0.59/Makefile.PL CHI-0.59/MANIFEST CHI-0.59/META.json CHI-0.59/META.yml CHI-0.59/perltidy.LOG CHI-0.59/README CHI-0.59/t/ CHI-0.59/t/00-load.t CHI-0.59/t/author-03-pod.t CHI-0.59/t/author-file-driver.t CHI-0.59/t/author-no-data-serializer.t CHI-0.59/t/author-RequiredModules.t CHI-0.59/t/Bugs.t CHI-0.59/t/Config.t CHI-0.59/t/Constants.t CHI-0.59/t/Driver-Memory.t CHI-0.59/t/Driver-RawMemory.t CHI-0.59/t/GetError.t CHI-0.59/t/Initialize.t CHI-0.59/t/permcache/ CHI-0.59/t/permcache/Default/ CHI-0.59/t/permcache/Default/0/ CHI-0.59/t/permcache/Default/0/4/ CHI-0.59/t/permcache/Default/0/4/1.dat CHI-0.59/t/permcache/Default/0/4/empty.dat CHI-0.59/t/permcache/Default/1/ CHI-0.59/t/permcache/Default/1/a/ CHI-0.59/t/permcache/Default/1/a/+20+21+22+23+24+25+26+27+28+29+2a+2b+2c-+2e+2f09+3a+3b+3c=+3e+3f+40AZ+5b+5c+5d+5e_+60az+7b+7c+7d~+f0.dat CHI-0.59/t/permcache/Default/2/ CHI-0.59/t/permcache/Default/2/3/ CHI-0.59/t/permcache/Default/2/3/+0a.dat CHI-0.59/t/permcache/Default/6/ CHI-0.59/t/permcache/Default/6/3/ CHI-0.59/t/permcache/Default/6/3/0.dat CHI-0.59/t/permcache/Default/7/ CHI-0.59/t/permcache/Default/7/7/ CHI-0.59/t/permcache/Default/7/7/+20.dat CHI-0.59/t/permcache/Default/8/ CHI-0.59/t/permcache/Default/8/1/ CHI-0.59/t/permcache/Default/8/1/a.dat CHI-0.59/t/permcache/Default/b/ CHI-0.59/t/permcache/Default/b/6/ CHI-0.59/t/permcache/Default/b/6/medium.dat CHI-0.59/t/release-dependent.t CHI-0.59/t/Sanity.t CHI-0.59/t/set_permcache.pl CHI-0.59/t/SetError.t CHI-0.59/t/smoke-Driver-CacheCache.t CHI-0.59/t/smoke-Driver-FastMmap.t CHI-0.59/t/smoke-Driver-File-DepthZero.t CHI-0.59/t/smoke-Driver-File.t CHI-0.59/t/smoke-Driver-NonMoose.t CHI-0.59/t/smoke-Driver-Subcache-l1_cache.t CHI-0.59/t/smoke-Driver-Subcache-mirror_cache.t CHI-0.59/t/smoke-Null.t CHI-0.59/t/Subcache.t CHI-0.59/t/Subclass.t CHI-0.59/t/Util.t CPAN.pm: Building J/JS/JSWARTZ/CHI-0.59.tar.gz >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for CHI Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- JSWARTZ/CHI-0.59.tar.gz ---- Test::Class [build_requires] Running make test Delayed until after prerequisites Running test for module 'Test::Class' Running make for E/ET/ETHER/Test-Class-0.48.tar.gz Checksum for /data/cpan/authors/id/E/ET/ETHER/Test-Class-0.48.tar.gz ok Test-Class-0.48 Test-Class-0.48/Build.PL Test-Class-0.48/Changes Test-Class-0.48/Makefile.PL Test-Class-0.48/MANIFEST Test-Class-0.48/META.json Test-Class-0.48/META.yml Test-Class-0.48/README Test-Class-0.48/lib Test-Class-0.48/lib/Test Test-Class-0.48/lib/Test/Class.pm Test-Class-0.48/lib/Test/Class Test-Class-0.48/lib/Test/Class/Load.pm Test-Class-0.48/lib/Test/Class/MethodInfo.pm Test-Class-0.48/t Test-Class-0.48/t/00-load.t Test-Class-0.48/t/20-load-classes.t Test-Class-0.48/t/21-load-subclassed.t Test-Class-0.48/t/_new.t Test-Class-0.48/t/bad-autoloads.t Test-Class-0.48/t/bailout.t Test-Class-0.48/t/builder.t Test-Class-0.48/t/compile.t Test-Class-0.48/t/current_method.t Test-Class-0.48/t/diag_on_failure.t Test-Class-0.48/t/die-in-setup.t Test-Class-0.48/t/die_before_plan.t Test-Class-0.48/t/expected_tests.t Test-Class-0.48/t/fail1.t Test-Class-0.48/t/fail2.t Test-Class-0.48/t/fail3.t Test-Class-0.48/t/filter.t Test-Class-0.48/t/filter_bad_filter.t Test-Class-0.48/t/filter_fixtures.t Test-Class-0.48/t/filter_fixtures_only.t Test-Class-0.48/t/filter_multiple.t Test-Class-0.48/t/header.t Test-Class-0.48/t/late_header.t Test-Class-0.48/t/methodinfo.t Test-Class-0.48/t/named_test.t Test-Class-0.48/t/num_method_tests.t Test-Class-0.48/t/num_tests.t Test-Class-0.48/t/override.t Test-Class-0.48/t/rt15870.t Test-Class-0.48/t/rt17264.t Test-Class-0.48/t/run_all_tests.t Test-Class-0.48/t/runtests.t Test-Class-0.48/t/runtests_die.t Test-Class-0.48/t/runtests_die_empty.t Test-Class-0.48/t/runtests_die_nearlyempty.t Test-Class-0.48/t/runtests_extra.t Test-Class-0.48/t/runtests_noplan.t Test-Class-0.48/t/runtests_of.t Test-Class-0.48/t/runtests_result.t Test-Class-0.48/t/runtests_return.t Test-Class-0.48/t/runtests_trailing.t Test-Class-0.48/t/runtests_with_wrong_class.t Test-Class-0.48/t/show_plan_in_shutdown.t Test-Class-0.48/t/skip1.t Test-Class-0.48/t/skip2.t Test-Class-0.48/t/skip_class_reason.t Test-Class-0.48/t/skip_empty_classes.t Test-Class-0.48/t/spaces.t Test-Class-0.48/t/startup.t Test-Class-0.48/t/startup_that_dies.t Test-Class-0.48/t/teardown-when-test-dies.t Test-Class-0.48/t/test_classes.t Test-Class-0.48/t/test_deep.t Test-Class-0.48/t/test_method.t Test-Class-0.48/t/test_verbose.t Test-Class-0.48/t/TestClassLoadSubclass.pm Test-Class-0.48/t/Tests.t Test-Class-0.48/t/todo.t Test-Class-0.48/t/test-libs Test-Class-0.48/t/test-libs/fail Test-Class-0.48/t/test-libs/fail/MyFail.pm Test-Class-0.48/t/test-libs/lib1 Test-Class-0.48/t/test-libs/lib1/Tests Test-Class-0.48/t/test-libs/lib1/Tests/Foo.pm Test-Class-0.48/t/test-libs/lib1/Tests/Foo Test-Class-0.48/t/test-libs/lib1/Tests/Foo/Bar.pm Test-Class-0.48/t/test-libs/lib2 Test-Class-0.48/t/test-libs/lib2/MyTest Test-Class-0.48/t/test-libs/lib2/MyTest/Baz.pm Test-Class-0.48/t/test-libs/lib3 Test-Class-0.48/t/test-libs/lib3/Tests Test-Class-0.48/t/test-libs/lib3/Tests/Bad1.pm Test-Class-0.48/t/test-libs/lib3/Tests/Good1.pm Test-Class-0.48/t/test-libs/lib3/Tests/Good2.pm Test-Class-0.48/t/test-libs/lib3/Tests/Subdir Test-Class-0.48/t/test-libs/lib3/Tests/Subdir/Bad2.pm Test-Class-0.48/t/test-libs/lib3/Tests/Subdir/Good3.pm Test-Class-0.48/xt Test-Class-0.48/xt/documented.t Test-Class-0.48/xt/meta.t Test-Class-0.48/xt/perlcritic.t Test-Class-0.48/xt/perlcriticrc Test-Class-0.48/xt/pmv.t Test-Class-0.48/xt/pod.t Test-Class-0.48/xt/spelling.t CPAN.pm: Building E/ET/ETHER/Test-Class-0.48.tar.gz >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Test::Class Writing MYMETA.yml and MYMETA.json >>> make cp lib/Test/Class.pm blib/lib/Test/Class.pm cp lib/Test/Class/MethodInfo.pm blib/lib/Test/Class/MethodInfo.pm cp lib/Test/Class/Load.pm blib/lib/Test/Class/Load.pm Manifying 3 pod documents ETHER/Test-Class-0.48.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Test::Class::Load 0.48, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic t/00-load.t .................... 1..1 ok 1 - use Test::Class::Load; ok t/20-load-classes.t ............ 1..14 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should tests in subdirectories ok 3 - ... and the methods should work correctly ok 4 - ... even if they are called from subclasses ok 5 - ... or they have their own methods ok 6 - Trying to load multiple lib paths should succeed ok 7 - Top level directories should be loaded even with multiple libs ok 8 - ... as should tests in subdirectories ok 9 - ... and the methods should work correctly ok 10 - ... even if they are called from subclasses ok 11 - ... or they have their own methods ok 12 - And secondary libs should be loaded ok 13 - ... and their methods should also work correctly ok 14 - Trying to load a bad module fails ok t/21-load-subclassed.t ......... 1..7 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should classes in subdirectories ok 3 - Filtered out classes in top level directories should *not* be loaded ok 4 - Filtered out classes in subdirectories should *not* be loaded ok 5 - Class Tests::Good1 method work as expected ok 6 - Class Tests::Good2 method work as expected ok 7 - Class Tests::Subdir::Good3 method work as expected ok t/_new.t ....................... 1..6 ok 1 - use Test::Class; ok 2 - An object of class 'Foo' isa 'Test::Class' ok 3 - key/value set ok 4 - An object of class 'Foo' isa 'Test::Class' ok 5 - prototype key/value set ok 6 - new key/value set ok t/bad-autoloads.t .............. 1..2 ok 1 - use Test::Class; ok 2 - avoided warnings from Contextual::Return::Value ok t/bailout.t .................... 1..2 ok 1 - bailout works ok 2 - exit value okay ok t/builder.t .................... 1..1 ok 1 - builder ok t/compile.t .................... 1..2 ok 1 - cannot test anon sub ok 2 - bad number detected ok # # Local::Test->test t/current_method.t ............. 1..4 ok 1 - current_method in setup ok 2 - current_method in method ok 3 - current_method in teardown ok 4 - current_test outside runtests ok t/diag_on_failure.t ............ 1..1 ok 1 - we show the test class and method name on test failure ok t/die-in-setup.t ............... 1..1 ok 1 - die in setup caused test method to fail ok t/die_before_plan.t ............ 1..1 ok 1 - die before plan ok t/expected_tests.t ............. 1..10 ok 1 - all set ok 2 - no_plan setup ok 3 - no_plan test ok 4 - no_plan teardown ok 5 - no_plan startup ok 6 - no_plan shutdown ok 7 - expected_test_of ok 8 - no_plan expected_test_of ok 9 - bad test class ok 10 - undef test class ok t/fail1.t ...................... 1..2 ok 1 - FAIL_ALL with plan ok 2 - exit value okay ok t/fail2.t ...................... 1..2 ok 1 - fail2 ok 2 - exit value okay ok t/fail3.t ...................... ok 1 - FAIL_ALL with no plan ok 2 - exit value okay 1..2 ok # # Foo->test_run t/filter.t ..................... 1..1 ok 1 - test_run not filtered, so is run ok t/filter_bad_filter.t .......... 1..1 ok 1 - error on non-coderef filter ok # # Foo->test_should_run t/filter_fixtures.t ............ 1..5 ok 1 - startup test is run, even though matches filter ok 2 - setup test is run, even though matches filter ok 3 - should run, due to not matching filter ok 4 - teardown test is run, even though matches filter ok 5 - shutdown test is run, even though matches filter ok t/filter_fixtures_only.t ....... 1..1 ok 1 - setup/teardown not run when no test methods ok # # Foo->test_another_not_matching # # Foo->test_not_filtered t/filter_multiple.t ............ 1..2 ok 1 - test_another_not_matching doesn't meet any filters, so is run ok 2 - test_not_filtered doesn't meet any filters, so is run ok t/header.t ..................... ok 1 - no duplicate headers 1..1 ok # # Local::Test->test t/late_header.t ................ 1..2 ok 1 - test number set ok 2 - builder expected tests set ok t/methodinfo.t ................. ok 1 - use Test::Class::MethodInfo; ok 2 - An object of class 'Test::Class::MethodInfo' isa 'Test::Class::MethodInfo' ok 3 - method type is test by default ok 4 - test methods default to 1 test 1..4 ok t/named_test.t ................. ok 1 - test names set to method name by default 1..1 ok # # Bar->no_plan_test # # Bar->no_plan_test2 # # Bar->two_tests t/num_method_tests.t ........... 1..19 ok 1 - fixed num tests ok 2 - no_plan tests ok 3 - cannot use non-method ok 4 - cannot update illegal value ok 5 - updated legal value ok 6 - update worked ok 7 - updated extended ok 8 - update worked ok 9 - extended method okay ok 10 - class expected_tests ok 11 - object expected_tests ok 12 - num_method_tests dies outside test class ok 13 - just passing ok 14 - no_plan_test just passing 1 ok 15 - no_plan_test just passing 2 ok 16 - no_plan_test2 just passing 1 ok 17 - no_plan_test2 just passing 2 ok 18 - two_tests just passing 1 ok 19 - two_tests just passing 2 ok # # Foo->test_num_tests # # Foo->test_num_tests t/num_tests.t .................. 1..4 ok 1 - num_tests access okay ok 2 - num_tests set okay ok 3 - num_tests access okay ok 4 - num_tests set okay ok t/override.t ................... 1..1 ok 1 - cannot override a public method with a test method ok t/rt15870.t .................... 1..1 ok 1 - sensible error if new() is overridden ok t/rt17264.t .................... 1..1 ok 1 - we figured out that we loaded Test::Class too late ok # # A::Test->setup t/run_all_tests.t .............. 1..5 ok 1 - Test::Class->SKIP_CLASS default ok 2 - Base::Test->SKIP_CLASS overridden ok 3 - A::Test->SKIP_CLASS default ok 4 - non skipping test class run as expected ok 5 - runtests skipped classes with SKIP_CLASS set ok # # Bar->test1 # # Bar->test2 t/runtests.t ................... 1..18 ok 1 - initialise2: methods ran in order ok 2 - test1: initialise1 ran once ok 3 - test1: initialise2 ran once ok 4 - test1: first test running ok 5 - test1: teardown not run ok 6 - teardown1: teardown run for every test ok 7 - teardown1: teardown run for every initialise1 ok 8 - teardown1: teardown run for every initialise2 ok 9 - teardown1: setup run for every test ok 10 - initialise2: methods ran in order ok 11 - test2: initialise1 ran twice ok 12 - test2: initialise2 ran twice ok 13 - test2: second test running ok 14 - test2: teardown ran once ok 15 - teardown1: teardown run for every test ok 16 - teardown1: teardown run for every initialise1 ok 17 - teardown1: teardown run for every initialise2 ok 18 - teardown1: setup run for every test ok t/runtests_die.t ............... 1..1 ok 1 - early die handled ok t/runtests_die_empty.t ......... 1..1 ok 1 - we can handle an exception that stringifies to the empty string ok t/runtests_die_nearlyempty.t ... 1..1 ok 1 - early die with nearly-empty messages handled ok t/runtests_extra.t ............. 1..1 ok 1 - extra test detected ok # # Foo->set_tests # # Foo->undef_tests t/runtests_noplan.t ............ ok 1 - this should pass ok 2 - runtime test 1 ok 3 - runtime test 2 ok 4 - expected number of tests ran 1..4 ok # # Tests1->test # # Tests2->test t/runtests_of.t ................ 1..3 ok 1 - Tests1 test ok 2 - Tests2 test ok 3 - correct number of tests ok t/runtests_result.t ............ 1..4 ok 1 - single failure ran okay ok 2 - failure detected ok 3 - a successful test ok 4 - success detected ok t/runtests_return.t ............ 1..2 ok 1 - early return handled (skip) ok 2 - early return handled (fail) ok t/runtests_trailing.t .......... 1..1 ok 1 - trailing expection detected ok t/runtests_with_wrong_class.t .. 1..2 ok 1 - use Test::Class; ok 2 - runtests dies if we are given something that is not a test class ok # # My::Test->test t/show_plan_in_shutdown.t ...... 1..2 ok 1 - passing test to force shutdown method to run ok 2 - shutdown method has run ok t/skip1.t ...................... 1..1 ok 1 - SKIP_ALL called skip_all ok # Failed test 'SKIP_ALL' # at t/skip2.t line 40. # (in Local::Test->_only) # STDERR is: # # # # Local::Test->test # # not: # # as expected t/skip2.t ...................... 1..4 not ok 1 - SKIP_ALL ok 2 - exit ok ok 3 - make the plan happy ok 4 - make the plan happy Failed 1/4 subtests t/skip_class_reason.t .......... 1..3 # Running under perl version 5.020001 for darwin # Current time local: Fri May 1 10:03:14 2015 # Current time GMT: Fri May 1 17:03:14 2015 # Using Test.pm version 1.26 ok 1 ok 2 ok 3 ok # # Bar::Test->the_test t/skip_empty_classes.t ......... 1..5 ok 1 - startup run ok 2 - setup run ok 3 - the_test has been run ok 4 - teardown run ok 5 - shutdown run ok t/spaces.t ..................... ok 1 - can have spaces around attributes 1..1 ok # # Foo::Test->test1 # # Foo::Test->test2 t/startup.t .................... 1..15 ok 1 - called start1 ok 2 - called start2 ok 3 - called setup1 ok 4 - called setup2 ok 5 - called test1 ok 6 - called tear1 ok 7 - called tear2 ok 8 - called setup1 ok 9 - called setup2 ok 10 - called test2 ok 11 - called tear1 ok 12 - called tear2 ok 13 - called end1 ok 14 - called end2 ok 15 - all expected methods ran ok t/startup_that_dies.t .......... 1..1 ok 1 - exception in startup method causes all tests to be skipped ok # Failed test 'exception in method, but teardown is still run' # at t/teardown-when-test-dies.t line 29. # STDERR is: # # # # TeardownWhenTestDies->my_test_method # # Failed test 'my_test_method died (oops! at t/teardown-when-test-dies.t line 15.)' # # at t/teardown-when-test-dies.t line 28. # # (in TeardownWhenTestDies->my_test_method) # # not: # /#\s+Failed\ test.*?\n?.*?at\ t\/teardown\-when\-test\-dies\.t line 28.*\n?/ # # (in TeardownWhenTestDies->my_test_method) # # as expected t/teardown-when-test-dies.t .... 1..1 not ok 1 - exception in method, but teardown is still run Failed 1/1 subtests t/test_classes.t ............... 1..1 ok 1 - _test_classes deals with undef values ok t/test_deep.t .................. 1..1 ok 1 - Test::Deep is not included as a test class, even though isa always returns true ok t/test_method.t ................ 1..4 ok 1 - $ENV{TEST_METHOD} with an invalid regex should die ok 2 - no TEST_METHOD runs all tests ok 3 - single match just runs one test ok 4 - two matches run both tests ok t/test_verbose.t ............... 1..1 ok 1 - TEST_VERBOSE outputs method diagnostic ok # # My::Test->Tests_attribute_default_number_of_tests # # My::Test->Tests_attribute_set_number_of_tests t/Tests.t ...................... 1..2 ok 1 - Tests attribute default number of tests ok 2 - Tests attribute set number of tests ok # Test::More: 1.001009 t/todo.t ....................... 1..2 ok 1 - todo tests work ok 2 - todo_test should run 1 test ok Test Summary Report ------------------- t/skip2.t (Wstat: 0 Tests: 4 Failed: 1) Failed test: 1 t/teardown-when-test-dies.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Files=57, Tests=189, 4 wallclock secs ( 0.23 usr 0.16 sys + 3.70 cusr 0.61 csys = 4.70 CPU) Result: FAIL Failed 2/57 test programs. 2/189 subtests failed. make: *** [test_dynamic] Error 255 ETHER/Test-Class-0.48.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ETHER/Test-Class-0.48.tar.gz Running make for J/JS/JSWARTZ/CHI-0.59.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok CPAN.pm: Building J/JS/JSWARTZ/CHI-0.59.tar.gz Warning: Prerequisite 'Test::Class => 0' for 'JSWARTZ/CHI-0.59.tar.gz' failed when processing 'ETHER/Test-Class-0.48.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/CHI/Driver/Role/IsSizeAware.pm blib/lib/CHI/Driver/Role/IsSizeAware.pm cp lib/CHI/t/Subclass.pm blib/lib/CHI/t/Subclass.pm cp lib/CHI/t/Subcache.pm blib/lib/CHI/t/Subcache.pm cp lib/CHI/t/RequiredModules.pm blib/lib/CHI/t/RequiredModules.pm cp lib/CHI/Driver.pm blib/lib/CHI/Driver.pm cp lib/CHI/Driver/Null.pm blib/lib/CHI/Driver/Null.pm cp lib/CHI/t/Driver/Subcache.pm blib/lib/CHI/t/Driver/Subcache.pm cp lib/CHI/Driver/Role/Universal.pm blib/lib/CHI/Driver/Role/Universal.pm cp lib/CHI/t/Driver/File.pm blib/lib/CHI/t/Driver/File.pm cp lib/CHI/t/Driver/NonMoose.pm blib/lib/CHI/t/Driver/NonMoose.pm cp lib/CHI/t/Driver/Subcache/mirror_cache.pm blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm cp lib/CHI/Test.pm blib/lib/CHI/Test.pm cp lib/CHI/Driver/Base/CacheContainer.pm blib/lib/CHI/Driver/Base/CacheContainer.pm cp lib/CHI/t/Driver/RawMemory.pm blib/lib/CHI/t/Driver/RawMemory.pm cp lib/CHI/Types.pm blib/lib/CHI/Types.pm cp lib/CHI/t/Null.pm blib/lib/CHI/t/Null.pm cp lib/CHI/Test/Class.pm blib/lib/CHI/Test/Class.pm cp lib/CHI/Driver/Development.pod blib/lib/CHI/Driver/Development.pod cp lib/CHI/Driver/Role/HasSubcaches.pm blib/lib/CHI/Driver/Role/HasSubcaches.pm cp lib/CHI/t/Driver/CacheCache.pm blib/lib/CHI/t/Driver/CacheCache.pm cp lib/CHI/t/Config.pm blib/lib/CHI/t/Config.pm cp lib/CHI/Serializer/Storable.pm blib/lib/CHI/Serializer/Storable.pm cp lib/CHI/Constants.pm blib/lib/CHI/Constants.pm cp lib/CHI/Test/Driver/NonMoose.pm blib/lib/CHI/Test/Driver/NonMoose.pm cp lib/CHI/Driver/FastMmap.pm blib/lib/CHI/Driver/FastMmap.pm cp lib/CHI/Driver/File.pm blib/lib/CHI/Driver/File.pm cp lib/CHI/t/Util.pm blib/lib/CHI/t/Util.pm cp lib/CHI/t/Constants.pm blib/lib/CHI/t/Constants.pm cp lib/CHI/Test/Util.pm blib/lib/CHI/Test/Util.pm cp lib/CHI/t/SetError.pm blib/lib/CHI/t/SetError.pm cp lib/CHI/Serializer/JSON.pm blib/lib/CHI/Serializer/JSON.pm cp lib/CHI/CacheObject.pm blib/lib/CHI/CacheObject.pm cp lib/CHI/Util.pm blib/lib/CHI/Util.pm cp lib/CHI/t/Driver/File/DepthZero.pm blib/lib/CHI/t/Driver/File/DepthZero.pm cp lib/CHI/t/Bugs.pm blib/lib/CHI/t/Bugs.pm cp lib/CHI/t/Driver/Memory.pm blib/lib/CHI/t/Driver/Memory.pm cp lib/CHI/Test/Driver/Readonly.pm blib/lib/CHI/Test/Driver/Readonly.pm cp lib/CHI/Test/Driver/Role/CheckKeyValidity.pm blib/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm cp lib/CHI/Benchmarks.pod blib/lib/CHI/Benchmarks.pod cp lib/CHI/Test/Driver/Writeonly.pm blib/lib/CHI/Test/Driver/Writeonly.pm cp lib/CHI/t/Sanity.pm blib/lib/CHI/t/Sanity.pm cp lib/CHI/t/Driver.pm blib/lib/CHI/t/Driver.pm cp lib/CHI/Driver/Memory.pm blib/lib/CHI/Driver/Memory.pm cp lib/CHI/Driver/Role/IsSubcache.pm blib/lib/CHI/Driver/Role/IsSubcache.pm cp lib/CHI/Driver/RawMemory.pm blib/lib/CHI/Driver/RawMemory.pm cp lib/CHI/t/Driver/FastMmap.pm blib/lib/CHI/t/Driver/FastMmap.pm cp lib/CHI/Driver/CacheCache.pm blib/lib/CHI/Driver/CacheCache.pm cp lib/CHI/t/Driver/Subcache/l1_cache.pm blib/lib/CHI/t/Driver/Subcache/l1_cache.pm cp lib/CHI/Stats.pm blib/lib/CHI/Stats.pm cp lib/CHI/t/Initialize.pm blib/lib/CHI/t/Initialize.pm cp lib/CHI/Driver/Metacache.pm blib/lib/CHI/Driver/Metacache.pm cp lib/CHI.pm blib/lib/CHI.pm cp lib/CHI/t/GetError.pm blib/lib/CHI/t/GetError.pm Manifying 15 pod documents JSWARTZ/CHI-0.59.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing CHI 0.59, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic t/00-load.t ............................. 1..1 ok 1 - use CHI; ok t/author-03-pod.t ....................... skipped: these tests are for testing by the author t/author-file-driver.t .................. skipped: these tests are for testing by the author t/author-no-data-serializer.t ........... skipped: these tests are for testing by the author t/author-RequiredModules.t .............. skipped: these tests are for testing by the author Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Bugs.pm line 7. Compilation failed in require at t/Bugs.t line 2. BEGIN failed--compilation aborted at t/Bugs.t line 2. t/Bugs.t ................................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Config.pm line 8. Compilation failed in require at t/Config.t line 2. BEGIN failed--compilation aborted at t/Config.t line 2. t/Config.t .............................. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Constants.pm line 6. Compilation failed in require at t/Constants.t line 2. BEGIN failed--compilation aborted at t/Constants.t line 2. t/Constants.t ........................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at t/Driver-Memory.t line 2. BEGIN failed--compilation aborted at t/Driver-Memory.t line 2. t/Driver-Memory.t ....................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 53) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 48) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/RawMemory.pm line 7. Compilation failed in require at t/Driver-RawMemory.t line 2. BEGIN failed--compilation aborted at t/Driver-RawMemory.t line 2. t/Driver-RawMemory.t .................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/GetError.pm line 7. Compilation failed in require at t/GetError.t line 2. BEGIN failed--compilation aborted at t/GetError.t line 2. t/GetError.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Initialize.pm line 7. Compilation failed in require at t/Initialize.t line 2. BEGIN failed--compilation aborted at t/Initialize.t line 2. t/Initialize.t .......................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/release-dependent.t ................... skipped: these tests are for release candidate testing Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Sanity.pm line 6. Compilation failed in require at t/Sanity.t line 2. BEGIN failed--compilation aborted at t/Sanity.t line 2. t/Sanity.t .............................. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/SetError.pm line 7. Compilation failed in require at t/SetError.t line 2. BEGIN failed--compilation aborted at t/SetError.t line 2. t/SetError.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/CacheCache.pm line 7. Compilation failed in require at t/smoke-Driver-CacheCache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-CacheCache.t line 10. t/smoke-Driver-CacheCache.t ............. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/FastMmap.pm line 8. Compilation failed in require at t/smoke-Driver-FastMmap.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-FastMmap.t line 10. t/smoke-Driver-FastMmap.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 53) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/File.pm line 11. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/File/DepthZero.pm line 8. Compilation failed in require at t/smoke-Driver-File-DepthZero.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-File-DepthZero.t line 10. t/smoke-Driver-File-DepthZero.t ......... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/File.pm line 11. Compilation failed in require at t/smoke-Driver-File.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-File.t line 10. t/smoke-Driver-File.t ................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 53) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 48) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/NonMoose.pm line 6. Compilation failed in require at t/smoke-Driver-NonMoose.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-NonMoose.t line 10. t/smoke-Driver-NonMoose.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 53) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Subcache.pm line 6. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Subcache/l1_cache.pm line 8. Compilation failed in require at t/smoke-Driver-Subcache-l1_cache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-l1_cache.t line 10. t/smoke-Driver-Subcache-l1_cache.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 53) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at (eval 52) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Subcache.pm line 6. Compilation failed in require at (eval 51) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm line 7. Compilation failed in require at t/smoke-Driver-Subcache-mirror_cache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-mirror_cache.t line 10. t/smoke-Driver-Subcache-mirror_cache.t .. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Null.pm line 6. Compilation failed in require at t/smoke-Null.t line 10. BEGIN failed--compilation aborted at t/smoke-Null.t line 10. t/smoke-Null.t .......................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Subcache.pm line 5. Compilation failed in require at t/Subcache.t line 2. BEGIN failed--compilation aborted at t/Subcache.t line 2. t/Subcache.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Subclass.pm line 6. Compilation failed in require at t/Subclass.t line 2. BEGIN failed--compilation aborted at t/Subclass.t line 2. t/Subclass.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .). at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at (eval 47) line 2. ...propagated at /Users/fly2000/var/megalib/base.pm line 84. BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/CHI-0.59-58m1Ok/blib/lib/CHI/t/Util.pm line 9. Compilation failed in require at t/Util.t line 2. BEGIN failed--compilation aborted at t/Util.t line 2. t/Util.t ................................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Test Summary Report ------------------- t/Bugs.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Config.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Constants.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Driver-Memory.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Driver-RawMemory.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/GetError.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Initialize.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Sanity.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/SetError.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-CacheCache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-FastMmap.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-File-DepthZero.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-File.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-NonMoose.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-Subcache-l1_cache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-Subcache-mirror_cache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Null.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Subcache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Subclass.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Util.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=26, Tests=1, 6 wallclock secs ( 0.10 usr 0.07 sys + 4.97 cusr 0.64 csys = 5.78 CPU) Result: FAIL Failed 20/26 test programs. 0/1 subtests failed. make: *** [test_dynamic] Error 2 JSWARTZ/CHI-0.59.tar.gz one dependency not OK (Test::Class); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports JSWARTZ/CHI-0.59.tar.gz Running make for K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV CPAN.pm: Building K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz Warning: Prerequisite 'CHI => 0' for 'KARMAN/Search-OpenSearch-0.407.tar.gz' failed when processing 'JSWARTZ/CHI-0.59.tar.gz' with 'make_test => NO one dependency not OK (Test::Class); additionally test harness failed'. Continuing, but chances to succeed are limited. >>> make cp lib/Search/OpenSearch/Response/JSON.pm blib/lib/Search/OpenSearch/Response/JSON.pm cp lib/Search/OpenSearch/Facets.pm blib/lib/Search/OpenSearch/Facets.pm cp lib/Search/OpenSearch/Response/Tiny.pm blib/lib/Search/OpenSearch/Response/Tiny.pm cp lib/Search/OpenSearch/Response.pm blib/lib/Search/OpenSearch/Response.pm cp lib/Search/OpenSearch/Engine.pm blib/lib/Search/OpenSearch/Engine.pm cp lib/Search/OpenSearch.pm blib/lib/Search/OpenSearch.pm cp lib/Search/OpenSearch/Response/XML.pm blib/lib/Search/OpenSearch/Response/XML.pm cp lib/Search/OpenSearch/Types.pm blib/lib/Search/OpenSearch/Types.pm cp lib/Search/OpenSearch/Response/ExtJS.pm blib/lib/Search/OpenSearch/Response/ExtJS.pm Manifying 9 pod documents KARMAN/Search-OpenSearch-0.407.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t # Testing Search::OpenSearch 0.407, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic # Failed test 'use Search::OpenSearch::Engine;' # at t/00-load.t line 9. # Tried to use 'Search::OpenSearch::Engine'. # Error: Can't locate CHI.pm in @INC (you may need to install the CHI module) (@INC contains: /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV/inc /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV/blib/lib /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .) at /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV/blib/lib/Search/OpenSearch/Engine.pm line 16. # BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV/blib/lib/Search/OpenSearch/Engine.pm line 16. # Compilation failed in require at t/00-load.t line 9. # BEGIN failed--compilation aborted at t/00-load.t line 9. # Looks like you failed 1 test of 3. t/00-load.t ....... 1..3 ok 1 - use Search::OpenSearch; not ok 2 - use Search::OpenSearch::Engine; ok 3 - use Search::OpenSearch::Response; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/3 subtests # set PLACK_TEST and make sure plack server is running t/01-client.t ..... 1..2 ok 1 # skip set PLACK_TEST=1 and verify server is running on localhost:5000 ok 2 # skip set PLACK_TEST=1 and verify server is running on localhost:5000 ok t/02-response.t ... 1..14 ok 1 - new Response::ExtJS object ok 2 - decode ExtJS ok 3 - extjs structure ok 4 - new Response::JSON object ok 5 - decode JSON ok 6 - json structure ok 7 - new Response::Tiny object ok 8 - decode Tiny JSON ok 9 - json structure ok 10 - new Response::XML object ok 11 - decode XML ok 12 - xml has updated field ok 13 - xml has id field ok 14 - xml structure ok # set OPENSEARCH_INDEX to valid path to test Plack with Lucy t/03-mem-leak.t ... 1..1 ok 1 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok t/04-types.t ...... 1..4 ok 1 - use Search::OpenSearch::Types; ok 2 - Foo->new with bad params throws exeption ok 3 - no object on bad params ok 4 - good Foo->new ok t/pod-coverage.t .. skipped: Author tests not required for installation t/pod.t ........... skipped: Author tests not required for installation Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 3 Failed: 1) Failed test: 2 Non-zero exit status: 1 Files=7, Tests=24, 4 wallclock secs ( 0.05 usr 0.02 sys + 2.38 cusr 0.25 csys = 2.70 CPU) Result: FAIL Failed 1/7 test programs. 1/24 subtests failed. make: *** [test_dynamic] Error 255 KARMAN/Search-OpenSearch-0.407.tar.gz one dependency not OK (CHI); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports KARMAN/Search-OpenSearch-0.407.tar.gz Running make for K/KA/KARMAN/Search-OpenSearch-Server-0.300.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Search-OpenSearch-Server-0.300-DglSWE CPAN.pm: Building K/KA/KARMAN/Search-OpenSearch-Server-0.300.tar.gz Warning: Prerequisite 'Search::OpenSearch => 0.400' for 'KARMAN/Search-OpenSearch-Server-0.300.tar.gz' failed when processing 'KARMAN/Search-OpenSearch-0.407.tar.gz' with 'make_test => NO one dependency not OK (CHI); additionally test harness failed'. Continuing, but chances to succeed are limited. >>> make cp lib/Search/OpenSearch/Server/Catalyst.pm blib/lib/Search/OpenSearch/Server/Catalyst.pm cp lib/Search/OpenSearch/Server/Plack.pm blib/lib/Search/OpenSearch/Server/Plack.pm cp lib/Search/OpenSearch/Server.pm blib/lib/Search/OpenSearch/Server.pm cp lib/CatalystX/Controller/OpenSearch.pm blib/lib/CatalystX/Controller/OpenSearch.pm cp lib/Search/OpenSearch/Result.pm blib/lib/Search/OpenSearch/Result.pm Manifying 5 pod documents KARMAN/Search-OpenSearch-Server-0.300.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use Search::OpenSearch::Server;' # at t/00-load.t line 6. # Tried to use 'Search::OpenSearch::Server'. # Error: Can't locate Search/OpenSearch.pm in @INC (you may need to install the Search::OpenSearch module) (@INC contains: /Users/fly2000/var/cpan/build/Search-OpenSearch-Server-0.300-DglSWE/inc /Users/fly2000/var/cpan/build/Search-OpenSearch-Server-0.300-DglSWE/blib/lib /Users/fly2000/var/cpan/build/Search-OpenSearch-Server-0.300-DglSWE/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib) at /Users/fly2000/var/cpan/build/Search-OpenSearch-Server-0.300-DglSWE/blib/lib/Search/OpenSearch/Server.pm line 5. # BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/Search-OpenSearch-Server-0.300-DglSWE/blib/lib/Search/OpenSearch/Server.pm line 5. # Compilation failed in require at t/00-load.t line 6. # BEGIN failed--compilation aborted at t/00-load.t line 6. # Testing Search::OpenSearch::Server , Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic # Looks like you failed 1 test of 1. t/00-load.t ....... 1..1 not ok 1 - use Search::OpenSearch::Server; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests # set OPENSEARCH_INDEX to valid path to test Plack with Lucy t/01-plack.t ...... 1..22 ok 1 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 2 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 3 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 4 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 5 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 6 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 7 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 8 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 9 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 10 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 11 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 12 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 13 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 14 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 15 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 16 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 17 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 18 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 19 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 20 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 21 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 22 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok # set OPENSEARCH_INDEX to valid path to test Plack with Lucy t/02-mem-leak.t ... 1..21 ok 1 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 2 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 3 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 4 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 5 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 6 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 7 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 8 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 9 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 10 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 11 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 12 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 13 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 14 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 15 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 16 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 17 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 18 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 19 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 20 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 21 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok # set OPENSEARCH_INDEX to valid path to test Plack with Lucy t/03-catalyst.t ... 1..20 ok 1 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 2 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 3 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 4 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 5 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 6 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 7 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 8 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 9 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 10 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 11 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 12 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 13 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 14 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 15 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 16 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 17 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 18 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 19 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok 20 # skip set OPENSEARCH_INDEX to valid path to test Plack with Lucy ok t/pod-coverage.t .. skipped: set RELEASE_TESTING to test POD t/pod.t ........... skipped: set RELEASE_TESTING to test POD Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=6, Tests=64, 0 wallclock secs ( 0.05 usr 0.02 sys + 0.59 cusr 0.08 csys = 0.74 CPU) Result: FAIL Failed 1/6 test programs. 1/64 subtests failed. make: *** [test_dynamic] Error 255 KARMAN/Search-OpenSearch-Server-0.300.tar.gz one dependency not OK (Search::OpenSearch); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports KARMAN/Search-OpenSearch-Server-0.300.tar.gz Running test for module 'Search::OpenSearch::Engine::Lucy' Running make for K/KA/KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz Checksum for /data/cpan/authors/id/K/KA/KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz ok Search-OpenSearch-Engine-Lucy-0.400/ Search-OpenSearch-Engine-Lucy-0.400/Changes Search-OpenSearch-Engine-Lucy-0.400/lib/ Search-OpenSearch-Engine-Lucy-0.400/Makefile.PL Search-OpenSearch-Engine-Lucy-0.400/MANIFEST Search-OpenSearch-Engine-Lucy-0.400/META.json Search-OpenSearch-Engine-Lucy-0.400/META.yml Search-OpenSearch-Engine-Lucy-0.400/README Search-OpenSearch-Engine-Lucy-0.400/t/ Search-OpenSearch-Engine-Lucy-0.400/t/00-load.t Search-OpenSearch-Engine-Lucy-0.400/t/01-rest-api.t Search-OpenSearch-Engine-Lucy-0.400/t/03-mem-leak.t Search-OpenSearch-Engine-Lucy-0.400/t/pod-coverage.t Search-OpenSearch-Engine-Lucy-0.400/t/pod.t Search-OpenSearch-Engine-Lucy-0.400/lib/Search/ Search-OpenSearch-Engine-Lucy-0.400/lib/Search/OpenSearch/ Search-OpenSearch-Engine-Lucy-0.400/lib/Search/OpenSearch/Engine/ Search-OpenSearch-Engine-Lucy-0.400/lib/Search/OpenSearch/Engine/Lucy.pm CPAN.pm: Building K/KA/KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz >>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL Warning: prerequisite Search::OpenSearch 0.400 not found. Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Search::OpenSearch::Engine::Lucy Writing MYMETA.yml and MYMETA.json ---- Unsatisfied dependencies detected during ---- ---- KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz ---- Search::OpenSearch [requires] Running make test Delayed until after prerequisites Running test for module 'Search::OpenSearch' Running make for K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV Warning: Prerequisite 'CHI => 0' for 'KARMAN/Search-OpenSearch-0.407.tar.gz' failed when processing 'JSWARTZ/CHI-0.59.tar.gz' with 'make_test => NO one dependency not OK (Test::Class); additionally test harness failed'. Continuing, but chances to succeed are limited. Has already been made Running make test Won't repeat unsuccessful test during this command Has already been tested within this command Running make for K/KA/KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Search-OpenSearch-Engine-Lucy-0.400-SgUaqI CPAN.pm: Building K/KA/KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz Warning: Prerequisite 'Search::OpenSearch => 0.400' for 'KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz' failed when processing 'KARMAN/Search-OpenSearch-0.407.tar.gz' with 'make_test => NO one dependency not OK (CHI); additionally test harness failed'. Continuing, but chances to succeed are limited. >>> make cp lib/Search/OpenSearch/Engine/Lucy.pm blib/lib/Search/OpenSearch/Engine/Lucy.pm Manifying 1 pod document KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Search::OpenSearch::Engine::Lucy 0.400, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic t/00-load.t ....... 1..1 ok 1 - use Search::OpenSearch::Engine::Lucy; ok # set OPENSEARCH_INDEX to valid path to test REST API t/01-rest-api.t ... 1..7 ok 1 # skip set OPENSEARCH_INDEX to valid path to test REST API ok 2 # skip set OPENSEARCH_INDEX to valid path to test REST API ok 3 # skip set OPENSEARCH_INDEX to valid path to test REST API ok 4 # skip set OPENSEARCH_INDEX to valid path to test REST API ok 5 # skip set OPENSEARCH_INDEX to valid path to test REST API ok 6 # skip set OPENSEARCH_INDEX to valid path to test REST API ok 7 # skip set OPENSEARCH_INDEX to valid path to test REST API ok Can't locate Search/OpenSearch.pm in @INC (you may need to install the Search::OpenSearch module) (@INC contains: /Users/fly2000/var/cpan/build/Search-OpenSearch-Engine-Lucy-0.400-SgUaqI/blib/lib /Users/fly2000/var/cpan/build/Search-OpenSearch-Engine-Lucy-0.400-SgUaqI/blib/arch /Users/fly2000/var/megalib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .) at t/03-mem-leak.t line 13. BEGIN failed--compilation aborted at t/03-mem-leak.t line 13. # Looks like your test exited with 2 before it could output anything. t/03-mem-leak.t ... 1..1 Dubious, test returned 2 (wstat 512, 0x200) Failed 1/1 subtests t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on Search::OpenSearch::Engine::Lucy ok t/pod.t ........... 1..1 ok 1 - POD test for blib/lib/Search/OpenSearch/Engine/Lucy.pm ok Test Summary Report ------------------- t/03-mem-leak.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 1 tests but ran 0. Files=5, Tests=10, 5 wallclock secs ( 0.04 usr 0.01 sys + 3.78 cusr 0.31 csys = 4.14 CPU) Result: FAIL Failed 1/5 test programs. 0/10 subtests failed. make: *** [test_dynamic] Error 255 KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz one dependency not OK (Search::OpenSearch); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz Running test for module 'Search::OpenSearch' Running make for K/KA/KARMAN/Search-OpenSearch-0.407.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Search-OpenSearch-0.407-a2ItzV Warning: Prerequisite 'CHI => 0' for 'KARMAN/Search-OpenSearch-0.407.tar.gz' failed when processing 'JSWARTZ/CHI-0.59.tar.gz' with 'make_test => NO one dependency not OK (Test::Class); additionally test harness failed'. Continuing, but chances to succeed are limited. Has already been made Running make test Won't repeat unsuccessful test during this command Has already been tested within this command Running make for K/KA/KARMAN/Dezi-0.004002.tar.gz Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Dezi-0.004002-O2jYv0 CPAN.pm: Building K/KA/KARMAN/Dezi-0.004002.tar.gz Warning: Prerequisite 'Search::OpenSearch => 0.400' for 'KARMAN/Dezi-0.004002.tar.gz' failed when processing 'KARMAN/Search-OpenSearch-0.407.tar.gz' with 'make_test => NO one dependency not OK (CHI); additionally test harness failed'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Search::OpenSearch::Server => 0.300' for 'KARMAN/Dezi-0.004002.tar.gz' failed when processing 'KARMAN/Search-OpenSearch-Server-0.300.tar.gz' with 'make_test => NO one dependency not OK (Search::OpenSearch); additionally test harness failed'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Search::OpenSearch::Engine::Lucy => 0.400' for 'KARMAN/Dezi-0.004002.tar.gz' failed when processing 'KARMAN/Search-OpenSearch-Engine-Lucy-0.400.tar.gz' with 'make_test => NO one dependency not OK (Search::OpenSearch); additionally test harness failed'. Continuing, but chances to succeed are limited. >>> make cp lib/Dezi/Config.pm blib/lib/Dezi/Config.pm cp lib/Dezi.pm blib/lib/Dezi.pm cp lib/Dezi/Architecture.pod blib/lib/Dezi/Architecture.pod cp lib/Dezi/Server.pm blib/lib/Dezi/Server.pm cp lib/Dezi/Tutorial.pod blib/lib/Dezi/Tutorial.pod cp lib/Dezi/Server/About.pm blib/lib/Dezi/Server/About.pm cp bin/dezi blib/script/dezi "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-Iinc" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/dezi Manifying 1 pod document Manifying 6 pod documents KARMAN/Dezi-0.004002.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t # Testing Dezi 0.004002, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic t/00-load.t ....... 1..1 ok 1 - use Dezi; ok Can't locate object method "new" via package "Dezi::Server" at /Users/fly2000/var/cpan/build/Dezi-0.004002-O2jYv0/blib/lib/Dezi/Config.pm line 138. # Looks like you planned 20 tests but ran 1. # Looks like your test exited with 255 just after 1. t/001-server.t .... 1..20 ok 1 - use Dezi::Server; Dubious, test returned 255 (wstat 65280, 0xff00) Failed 19/20 subtests # must define DEZI_INDEX t/002-mem-leak.t .. 1..1 ok 1 # skip must define DEZI_INDEX ok t/pod-coverage.t .. 1..4 ok 1 - Pod coverage on Dezi ok 2 - Pod coverage on Dezi::Config ok 3 - Pod coverage on Dezi::Server ok 4 - Pod coverage on Dezi::Server::About ok t/pod.t ........... 1..7 ok 1 - POD test for blib/lib/Dezi.pm ok 2 - POD test for blib/lib/Dezi/Architecture.pod ok 3 - POD test for blib/lib/Dezi/Config.pm ok 4 - POD test for blib/lib/Dezi/Server.pm ok 5 - POD test for blib/lib/Dezi/Tutorial.pod ok 6 - POD test for blib/lib/Dezi/Server/About.pm ok 7 - POD test for blib/script/dezi ok Test Summary Report ------------------- t/001-server.t (Wstat: 65280 Tests: 1 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 20 tests but ran 1. Files=5, Tests=14, 2 wallclock secs ( 0.04 usr 0.02 sys + 1.83 cusr 0.18 csys = 2.07 CPU) Result: FAIL Failed 1/5 test programs. 0/14 subtests failed. make: *** [test_dynamic] Error 255 KARMAN/Dezi-0.004002.tar.gz 3 dependencies missing (Search::OpenSearch::Server,Search::OpenSearch,Search::OpenSearch::Engine::Lucy); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports KARMAN/Dezi-0.004002.tar.gz Finished 2015-05-01T10:03:41