PATH=/usr/bin:/bin:/Users/fly2000/cpanfly-5.20/var/megalib/bin
Start 2017-07-15T10:14:16
ActivePerl-2000 CPAN-2.10
Reading '/Users/fly2000/cpanfly-5.20/var/cpan/Metadata'
Database was generated on Sat, 15 Jul 2017 04:17:03 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/App-depak-0.57.tar.gz
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-depak-0.57.tar.gz ok
App-depak-0.57/
App-depak-0.57/README
App-depak-0.57/lib/
App-depak-0.57/lib/App/
App-depak-0.57/lib/App/depak.pm
App-depak-0.57/lib/Perinci/
App-depak-0.57/lib/Perinci/CmdLine/
App-depak-0.57/lib/Perinci/CmdLine/depak.pm
App-depak-0.57/Makefile.PL
App-depak-0.57/Changes.new
App-depak-0.57/Changes
App-depak-0.57/dist.ini
App-depak-0.57/script/
App-depak-0.57/script/depak
App-depak-0.57/LICENSE
App-depak-0.57/t/
App-depak-0.57/t/00-compile.t
App-depak-0.57/t/release-rinci.t
App-depak-0.57/t/author-pod-syntax.t
App-depak-0.57/t/author-pod-coverage.t
App-depak-0.57/weaver.ini
App-depak-0.57/MANIFEST
App-depak-0.57/META.json
App-depak-0.57/META.yml
Configuring P/PE/PERLANCAR/App-depak-0.57.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Warning: prerequisite App::tracepm 0.17 not found.
Warning: prerequisite Module::DataPack 0.21 not found. We have 0.20.
Warning: prerequisite Module::FatPack 0.16 not found. We have 0.14.
Warning: prerequisite Perinci::CmdLine::Lite 1.76 not found. We have 1.75.
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for App::depak
Writing MYMETA.yml and MYMETA.json
PERLANCAR/App-depak-0.57.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/App-depak-0.57.tar.gz
---- Unsatisfied dependencies detected during ----
---- PERLANCAR/App-depak-0.57.tar.gz ----
App::tracepm [requires]
Module::DataPack [requires]
Module::FatPack [requires]
Perinci::CmdLine::Lite [requires]
Running test for module 'App::tracepm'
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-tracepm-0.20.tar.gz ok
App-tracepm-0.20/
App-tracepm-0.20/README
App-tracepm-0.20/lib/
App-tracepm-0.20/lib/App/
App-tracepm-0.20/lib/App/tracepm.pm
App-tracepm-0.20/lib/App/tracepm/
App-tracepm-0.20/lib/App/tracepm/Tracer.pm
App-tracepm-0.20/Makefile.PL
App-tracepm-0.20/Changes
App-tracepm-0.20/dist.ini
App-tracepm-0.20/script/
App-tracepm-0.20/script/tracepm
App-tracepm-0.20/LICENSE
App-tracepm-0.20/t/
App-tracepm-0.20/t/00-compile.t
App-tracepm-0.20/t/release-rinci.t
App-tracepm-0.20/t/author-pod-syntax.t
App-tracepm-0.20/t/author-pod-coverage.t
App-tracepm-0.20/weaver.ini
App-tracepm-0.20/MANIFEST
App-tracepm-0.20/META.json
App-tracepm-0.20/META.yml
Configuring P/PE/PERLANCAR/App-tracepm-0.20.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Warning: prerequisite CHI 0 not found.
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for App::tracepm
Writing MYMETA.yml and MYMETA.json
PERLANCAR/App-tracepm-0.20.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/App-tracepm-0.20.tar.gz
---- Unsatisfied dependencies detected during ----
---- PERLANCAR/App-tracepm-0.20.tar.gz ----
CHI [requires]
Running test for module 'CHI'
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/J/JS/JSWARTZ/CHI-0.60.tar.gz ok
CHI-0.60/
CHI-0.60/Changes
CHI-0.60/etc/
CHI-0.60/etc/bench/
CHI-0.60/etc/bench/bench.pl
CHI-0.60/INSTALL
CHI-0.60/lib/
CHI-0.60/lib/CHI/
CHI-0.60/lib/CHI/Benchmarks.pod
CHI-0.60/lib/CHI/CacheObject.pm
CHI-0.60/lib/CHI/Constants.pm
CHI-0.60/lib/CHI/Driver/
CHI-0.60/lib/CHI/Driver/Base/
CHI-0.60/lib/CHI/Driver/Base/CacheContainer.pm
CHI-0.60/lib/CHI/Driver/CacheCache.pm
CHI-0.60/lib/CHI/Driver/Development.pod
CHI-0.60/lib/CHI/Driver/FastMmap.pm
CHI-0.60/lib/CHI/Driver/File.pm
CHI-0.60/lib/CHI/Driver/Memory.pm
CHI-0.60/lib/CHI/Driver/Metacache.pm
CHI-0.60/lib/CHI/Driver/Null.pm
CHI-0.60/lib/CHI/Driver/RawMemory.pm
CHI-0.60/lib/CHI/Driver/Role/
CHI-0.60/lib/CHI/Driver/Role/HasSubcaches.pm
CHI-0.60/lib/CHI/Driver/Role/IsSizeAware.pm
CHI-0.60/lib/CHI/Driver/Role/IsSubcache.pm
CHI-0.60/lib/CHI/Driver/Role/Universal.pm
CHI-0.60/lib/CHI/Driver.pm
CHI-0.60/lib/CHI/Serializer/
CHI-0.60/lib/CHI/Serializer/JSON.pm
CHI-0.60/lib/CHI/Serializer/Storable.pm
CHI-0.60/lib/CHI/Stats.pm
CHI-0.60/lib/CHI/t/
CHI-0.60/lib/CHI/t/Bugs.pm
CHI-0.60/lib/CHI/t/Config.pm
CHI-0.60/lib/CHI/t/Constants.pm
CHI-0.60/lib/CHI/t/Driver/
CHI-0.60/lib/CHI/t/Driver/CacheCache.pm
CHI-0.60/lib/CHI/t/Driver/FastMmap.pm
CHI-0.60/lib/CHI/t/Driver/File/
CHI-0.60/lib/CHI/t/Driver/File/DepthZero.pm
CHI-0.60/lib/CHI/t/Driver/File.pm
CHI-0.60/lib/CHI/t/Driver/Memory.pm
CHI-0.60/lib/CHI/t/Driver/NonMoose.pm
CHI-0.60/lib/CHI/t/Driver/RawMemory.pm
CHI-0.60/lib/CHI/t/Driver/Subcache/
CHI-0.60/lib/CHI/t/Driver/Subcache/l1_cache.pm
CHI-0.60/lib/CHI/t/Driver/Subcache/mirror_cache.pm
CHI-0.60/lib/CHI/t/Driver/Subcache.pm
CHI-0.60/lib/CHI/t/Driver.pm
CHI-0.60/lib/CHI/t/GetError.pm
CHI-0.60/lib/CHI/t/Initialize.pm
CHI-0.60/lib/CHI/t/Null.pm
CHI-0.60/lib/CHI/t/RequiredModules.pm
CHI-0.60/lib/CHI/t/Sanity.pm
CHI-0.60/lib/CHI/t/SetError.pm
CHI-0.60/lib/CHI/t/Subcache.pm
CHI-0.60/lib/CHI/t/Subclass.pm
CHI-0.60/lib/CHI/t/Util.pm
CHI-0.60/lib/CHI/Test/
CHI-0.60/lib/CHI/Test/Class.pm
CHI-0.60/lib/CHI/Test/Driver/
CHI-0.60/lib/CHI/Test/Driver/NonMoose.pm
CHI-0.60/lib/CHI/Test/Driver/Readonly.pm
CHI-0.60/lib/CHI/Test/Driver/Role/
CHI-0.60/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm
CHI-0.60/lib/CHI/Test/Driver/Writeonly.pm
CHI-0.60/lib/CHI/Test/Util.pm
CHI-0.60/lib/CHI/Test.pm
CHI-0.60/lib/CHI/Types.pm
CHI-0.60/lib/CHI/Util.pm
CHI-0.60/lib/CHI.pm
CHI-0.60/LICENSE
CHI-0.60/Makefile.PL
CHI-0.60/MANIFEST
CHI-0.60/META.json
CHI-0.60/META.yml
CHI-0.60/perltidy.LOG
CHI-0.60/README
CHI-0.60/t/
CHI-0.60/t/00-load.t
CHI-0.60/t/author-03-pod.t
CHI-0.60/t/author-file-driver.t
CHI-0.60/t/author-no-data-serializer.t
CHI-0.60/t/author-RequiredModules.t
CHI-0.60/t/Bugs.t
CHI-0.60/t/Config.t
CHI-0.60/t/Constants.t
CHI-0.60/t/Driver-Memory.t
CHI-0.60/t/Driver-RawMemory.t
CHI-0.60/t/GetError.t
CHI-0.60/t/Initialize.t
CHI-0.60/t/permcache/
CHI-0.60/t/permcache/Default/
CHI-0.60/t/permcache/Default/0/
CHI-0.60/t/permcache/Default/0/4/
CHI-0.60/t/permcache/Default/0/4/1.dat
CHI-0.60/t/permcache/Default/0/4/empty.dat
CHI-0.60/t/permcache/Default/1/
CHI-0.60/t/permcache/Default/1/a/
CHI-0.60/t/permcache/Default/1/a/+20+21+22+23+24+25+26+27+28+29+2a+2b+2c-+2e+2f09+3a+3b+3c=+3e+3f+40AZ+5b+5c+5d+5e_+60az+7b+7c+7d~+f0.dat
CHI-0.60/t/permcache/Default/2/
CHI-0.60/t/permcache/Default/2/3/
CHI-0.60/t/permcache/Default/2/3/+0a.dat
CHI-0.60/t/permcache/Default/6/
CHI-0.60/t/permcache/Default/6/3/
CHI-0.60/t/permcache/Default/6/3/0.dat
CHI-0.60/t/permcache/Default/7/
CHI-0.60/t/permcache/Default/7/7/
CHI-0.60/t/permcache/Default/7/7/+20.dat
CHI-0.60/t/permcache/Default/8/
CHI-0.60/t/permcache/Default/8/1/
CHI-0.60/t/permcache/Default/8/1/a.dat
CHI-0.60/t/permcache/Default/b/
CHI-0.60/t/permcache/Default/b/6/
CHI-0.60/t/permcache/Default/b/6/medium.dat
CHI-0.60/t/release-dependent.t
CHI-0.60/t/Sanity.t
CHI-0.60/t/set_permcache.pl
CHI-0.60/t/SetError.t
CHI-0.60/t/smoke-Driver-CacheCache.t
CHI-0.60/t/smoke-Driver-FastMmap.t
CHI-0.60/t/smoke-Driver-File-DepthZero.t
CHI-0.60/t/smoke-Driver-File.t
CHI-0.60/t/smoke-Driver-NonMoose.t
CHI-0.60/t/smoke-Driver-Subcache-l1_cache.t
CHI-0.60/t/smoke-Driver-Subcache-mirror_cache.t
CHI-0.60/t/smoke-Null.t
CHI-0.60/t/Subcache.t
CHI-0.60/t/Subclass.t
CHI-0.60/t/Util.t
Configuring J/JS/JSWARTZ/CHI-0.60.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for CHI
Writing MYMETA.yml and MYMETA.json
JSWARTZ/CHI-0.60.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for J/JS/JSWARTZ/CHI-0.60.tar.gz
---- Unsatisfied dependencies detected during ----
---- JSWARTZ/CHI-0.60.tar.gz ----
Test::Class [build_requires]
Running test for module 'Test::Class'
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/E/ET/ETHER/Test-Class-0.50.tar.gz ok
Test-Class-0.50/
Test-Class-0.50/Changes
Test-Class-0.50/MANIFEST
Test-Class-0.50/META.json
Test-Class-0.50/META.yml
Test-Class-0.50/Makefile.PL
Test-Class-0.50/README
Test-Class-0.50/lib/
Test-Class-0.50/t/
Test-Class-0.50/xt/
Test-Class-0.50/xt/documented.t
Test-Class-0.50/xt/meta.t
Test-Class-0.50/xt/perlcritic.t
Test-Class-0.50/xt/perlcriticrc
Test-Class-0.50/xt/pmv.t
Test-Class-0.50/xt/pod.t
Test-Class-0.50/xt/spelling.t
Test-Class-0.50/t/00-load.t
Test-Class-0.50/t/20-load-classes.t
Test-Class-0.50/t/21-load-subclassed.t
Test-Class-0.50/t/TestClassLoadSubclass.pm
Test-Class-0.50/t/Tests.t
Test-Class-0.50/t/_new.t
Test-Class-0.50/t/bad-autoloads.t
Test-Class-0.50/t/bailout.t
Test-Class-0.50/t/builder.t
Test-Class-0.50/t/compile.t
Test-Class-0.50/t/current_method.t
Test-Class-0.50/t/diag_on_failure.t
Test-Class-0.50/t/die-in-setup.t
Test-Class-0.50/t/die_before_plan.t
Test-Class-0.50/t/expected_tests.t
Test-Class-0.50/t/fail1.t
Test-Class-0.50/t/fail2.t
Test-Class-0.50/t/fail3.t
Test-Class-0.50/t/filter.t
Test-Class-0.50/t/filter_bad_filter.t
Test-Class-0.50/t/filter_fixtures.t
Test-Class-0.50/t/filter_fixtures_only.t
Test-Class-0.50/t/filter_multiple.t
Test-Class-0.50/t/header.t
Test-Class-0.50/t/late_header.t
Test-Class-0.50/t/methodinfo.t
Test-Class-0.50/t/named_test.t
Test-Class-0.50/t/num_method_tests.t
Test-Class-0.50/t/num_tests.t
Test-Class-0.50/t/override.t
Test-Class-0.50/t/rt15870.t
Test-Class-0.50/t/rt17264.t
Test-Class-0.50/t/run_all_tests.t
Test-Class-0.50/t/runtests.t
Test-Class-0.50/t/runtests_die.t
Test-Class-0.50/t/runtests_die_empty.t
Test-Class-0.50/t/runtests_die_nearlyempty.t
Test-Class-0.50/t/runtests_extra.t
Test-Class-0.50/t/runtests_noplan.t
Test-Class-0.50/t/runtests_of.t
Test-Class-0.50/t/runtests_result.t
Test-Class-0.50/t/runtests_return.t
Test-Class-0.50/t/runtests_trailing.t
Test-Class-0.50/t/runtests_with_wrong_class.t
Test-Class-0.50/t/show_plan_in_shutdown.t
Test-Class-0.50/t/skip1.t
Test-Class-0.50/t/skip2.t
Test-Class-0.50/t/skip_class_reason.t
Test-Class-0.50/t/skip_empty_classes.t
Test-Class-0.50/t/spaces.t
Test-Class-0.50/t/startup.t
Test-Class-0.50/t/startup_that_dies.t
Test-Class-0.50/t/teardown-when-test-dies.t
Test-Class-0.50/t/test-libs/
Test-Class-0.50/t/test_classes.t
Test-Class-0.50/t/test_deep.t
Test-Class-0.50/t/test_method.t
Test-Class-0.50/t/test_verbose.t
Test-Class-0.50/t/todo.t
Test-Class-0.50/t/test-libs/fail/
Test-Class-0.50/t/test-libs/lib1/
Test-Class-0.50/t/test-libs/lib2/
Test-Class-0.50/t/test-libs/lib3/
Test-Class-0.50/t/test-libs/lib3/Tests/
Test-Class-0.50/t/test-libs/lib3/Tests/Bad1.pm
Test-Class-0.50/t/test-libs/lib3/Tests/Good1.pm
Test-Class-0.50/t/test-libs/lib3/Tests/Good2.pm
Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/
Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Bad2.pm
Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Good3.pm
Test-Class-0.50/t/test-libs/lib2/MyTest/
Test-Class-0.50/t/test-libs/lib2/MyTest/Baz.pm
Test-Class-0.50/t/test-libs/lib1/Tests/
Test-Class-0.50/t/test-libs/lib1/Tests/Foo/
Test-Class-0.50/t/test-libs/lib1/Tests/Foo.pm
Test-Class-0.50/t/test-libs/lib1/Tests/Foo/Bar.pm
Test-Class-0.50/t/test-libs/fail/MyFail.pm
Test-Class-0.50/lib/Test/
Test-Class-0.50/lib/Test/Class/
Test-Class-0.50/lib/Test/Class.pm
Test-Class-0.50/lib/Test/Class/Load.pm
Test-Class-0.50/lib/Test/Class/MethodInfo.pm
Configuring E/ET/ETHER/Test-Class-0.50.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Test::Class
Writing MYMETA.yml and MYMETA.json
ETHER/Test-Class-0.50.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for E/ET/ETHER/Test-Class-0.50.tar.gz
>>> make
cp lib/Test/Class.pm blib/lib/Test/Class.pm
cp lib/Test/Class/MethodInfo.pm blib/lib/Test/Class/MethodInfo.pm
cp lib/Test/Class/Load.pm blib/lib/Test/Class/Load.pm
Manifying 3 pod documents
ETHER/Test-Class-0.50.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Test::Class::Load 0.50, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic
t/00-load.t ....................
1..1
ok 1 - use Test::Class::Load;
ok
t/20-load-classes.t ............
1..14
ok 1 - Classes in top level directories should be loaded
ok 2 - ... as should tests in subdirectories
ok 3 - ... and the methods should work correctly
ok 4 - ... even if they are called from subclasses
ok 5 - ... or they have their own methods
ok 6 - Trying to load multiple lib paths should succeed
ok 7 - Top level directories should be loaded even with multiple libs
ok 8 - ... as should tests in subdirectories
ok 9 - ... and the methods should work correctly
ok 10 - ... even if they are called from subclasses
ok 11 - ... or they have their own methods
ok 12 - And secondary libs should be loaded
ok 13 - ... and their methods should also work correctly
ok 14 - Trying to load a bad module fails
ok
t/21-load-subclassed.t .........
1..7
ok 1 - Classes in top level directories should be loaded
ok 2 - ... as should classes in subdirectories
ok 3 - Filtered out classes in top level directories should *not* be loaded
ok 4 - Filtered out classes in subdirectories should *not* be loaded
ok 5 - Class Tests::Good1 method work as expected
ok 6 - Class Tests::Good2 method work as expected
ok 7 - Class Tests::Subdir::Good3 method work as expected
ok
t/_new.t .......................
1..6
ok 1 - use Test::Class;
ok 2 - An object of class 'Foo' isa 'Test::Class'
ok 3 - key/value set
ok 4 - An object of class 'Foo' isa 'Test::Class'
ok 5 - prototype key/value set
ok 6 - new key/value set
ok
t/bad-autoloads.t ..............
1..2
ok 1 - use Test::Class;
ok 2 - avoided warnings from Contextual::Return::Value
ok
t/bailout.t ....................
1..2
ok 1 - bailout works
ok 2 - exit value okay
ok
t/builder.t ....................
1..1
ok 1 - builder
ok
t/compile.t ....................
1..2
ok 1 - cannot test anon sub
ok 2 - bad number detected
ok
#
# Local::Test->test
t/current_method.t .............
1..4
ok 1 - current_method in setup
ok 2 - current_method in method
ok 3 - current_method in teardown
ok 4 - current_test outside runtests
ok
t/diag_on_failure.t ............
1..1
ok 1 - we show the test class and method name on test failure
ok
t/die-in-setup.t ...............
1..1
ok 1 - die in setup caused test method to fail
ok
t/die_before_plan.t ............
1..1
ok 1 - die before plan
ok
t/expected_tests.t .............
1..10
ok 1 - all set
ok 2 - no_plan setup
ok 3 - no_plan test
ok 4 - no_plan teardown
ok 5 - no_plan startup
ok 6 - no_plan shutdown
ok 7 - expected_test_of
ok 8 - no_plan expected_test_of
ok 9 - bad test class
ok 10 - undef test class
ok
t/fail1.t ......................
1..2
ok 1 - FAIL_ALL with plan
ok 2 - exit value okay
ok
t/fail2.t ......................
1..2
ok 1 - fail2
ok 2 - exit value okay
ok
t/fail3.t ......................
ok 1 - FAIL_ALL with no plan
ok 2 - exit value okay
1..2
ok
#
# Foo->test_run
t/filter.t .....................
1..1
ok 1 - test_run not filtered, so is run
ok
t/filter_bad_filter.t ..........
1..1
ok 1 - error on non-coderef filter
ok
#
# Foo->test_should_run
t/filter_fixtures.t ............
1..5
ok 1 - startup test is run, even though matches filter
ok 2 - setup test is run, even though matches filter
ok 3 - should run, due to not matching filter
ok 4 - teardown test is run, even though matches filter
ok 5 - shutdown test is run, even though matches filter
ok
t/filter_fixtures_only.t .......
1..1
ok 1 - setup/teardown not run when no test methods
ok
#
# Foo->test_another_not_matching
#
# Foo->test_not_filtered
t/filter_multiple.t ............
1..2
ok 1 - test_another_not_matching doesn't meet any filters, so is run
ok 2 - test_not_filtered doesn't meet any filters, so is run
ok
t/header.t .....................
ok 1 - no duplicate headers
1..1
ok
#
# Local::Test->test
t/late_header.t ................
1..2
ok 1 - test number set
ok 2 - builder expected tests set
ok
t/methodinfo.t .................
ok 1 - use Test::Class::MethodInfo;
ok 2 - An object of class 'Test::Class::MethodInfo' isa 'Test::Class::MethodInfo'
ok 3 - method type is test by default
ok 4 - test methods default to 1 test
1..4
ok
t/named_test.t .................
ok 1 - test names set to method name by default
1..1
ok
#
# Bar->no_plan_test
#
# Bar->no_plan_test2
#
# Bar->two_tests
t/num_method_tests.t ...........
1..19
ok 1 - fixed num tests
ok 2 - no_plan tests
ok 3 - cannot use non-method
ok 4 - cannot update illegal value
ok 5 - updated legal value
ok 6 - update worked
ok 7 - updated extended
ok 8 - update worked
ok 9 - extended method okay
ok 10 - class expected_tests
ok 11 - object expected_tests
ok 12 - num_method_tests dies outside test class
ok 13 - just passing
ok 14 - no_plan_test just passing 1
ok 15 - no_plan_test just passing 2
ok 16 - no_plan_test2 just passing 1
ok 17 - no_plan_test2 just passing 2
ok 18 - two_tests just passing 1
ok 19 - two_tests just passing 2
ok
#
# Foo->test_num_tests
#
# Foo->test_num_tests
t/num_tests.t ..................
1..4
ok 1 - num_tests access okay
ok 2 - num_tests set okay
ok 3 - num_tests access okay
ok 4 - num_tests set okay
ok
t/override.t ...................
1..1
ok 1 - cannot override a public method with a test method
ok
t/rt15870.t ....................
1..1
ok 1 - sensible error if new() is overridden
ok
t/rt17264.t ....................
1..1
ok 1 - we figured out that we loaded Test::Class too late
ok
#
# A::Test->setup
t/run_all_tests.t ..............
1..5
ok 1 - Test::Class->SKIP_CLASS default
ok 2 - Base::Test->SKIP_CLASS overridden
ok 3 - A::Test->SKIP_CLASS default
ok 4 - non skipping test class run as expected
ok 5 - runtests skipped classes with SKIP_CLASS set
ok
#
# Bar->test1
#
# Bar->test2
t/runtests.t ...................
1..18
ok 1 - initialise2: methods ran in order
ok 2 - test1: initialise1 ran once
ok 3 - test1: initialise2 ran once
ok 4 - test1: first test running
ok 5 - test1: teardown not run
ok 6 - teardown1: teardown run for every test
ok 7 - teardown1: teardown run for every initialise1
ok 8 - teardown1: teardown run for every initialise2
ok 9 - teardown1: setup run for every test
ok 10 - initialise2: methods ran in order
ok 11 - test2: initialise1 ran twice
ok 12 - test2: initialise2 ran twice
ok 13 - test2: second test running
ok 14 - test2: teardown ran once
ok 15 - teardown1: teardown run for every test
ok 16 - teardown1: teardown run for every initialise1
ok 17 - teardown1: teardown run for every initialise2
ok 18 - teardown1: setup run for every test
ok
t/runtests_die.t ...............
1..1
ok 1 - early die handled
ok
t/runtests_die_empty.t .........
1..1
ok 1 - we can handle an exception that stringifies to the empty string
ok
t/runtests_die_nearlyempty.t ...
1..1
ok 1 - early die with nearly-empty messages handled
ok
t/runtests_extra.t .............
1..1
ok 1 - extra test detected
ok
#
# Foo->set_tests
#
# Foo->undef_tests
t/runtests_noplan.t ............
ok 1 - this should pass
ok 2 - runtime test 1
ok 3 - runtime test 2
ok 4 - expected number of tests ran
1..4
ok
#
# Tests1->test
#
# Tests2->test
t/runtests_of.t ................
1..3
ok 1 - Tests1 test
ok 2 - Tests2 test
ok 3 - correct number of tests
ok
t/runtests_result.t ............
1..4
ok 1 - single failure ran okay
ok 2 - failure detected
ok 3 - a successful test
ok 4 - success detected
ok
t/runtests_return.t ............
1..2
ok 1 - early return handled (skip)
ok 2 - early return handled (fail)
ok
t/runtests_trailing.t ..........
1..1
ok 1 - trailing expection detected
ok
t/runtests_with_wrong_class.t ..
1..2
ok 1 - use Test::Class;
ok 2 - runtests dies if we are given something that is not a test class
ok
#
# My::Test->test
t/show_plan_in_shutdown.t ......
1..2
ok 1 - passing test to force shutdown method to run
ok 2 - shutdown method has run
ok
t/skip1.t ......................
1..1
ok 1 - SKIP_ALL called skip_all
ok
# Failed test 'SKIP_ALL'
# at t/skip2.t line 40.
# (in Local::Test->_only)
# STDERR is:
# #
# # Local::Test->test
#
# not:
#
# as expected
t/skip2.t ......................
1..4
not ok 1 - SKIP_ALL
ok 2 - exit ok
ok 3 - make the plan happy
ok 4 - make the plan happy
Failed 1/4 subtests
t/skip_class_reason.t ..........
1..3
# Running under perl version 5.020001 for darwin
# Current time local: Sat Jul 15 10:14:28 2017
# Current time GMT: Sat Jul 15 17:14:28 2017
# Using Test.pm version 1.26
ok 1
ok 2
ok 3
ok
#
# Bar::Test->the_test
t/skip_empty_classes.t .........
1..5
ok 1 - startup run
ok 2 - setup run
ok 3 - the_test has been run
ok 4 - teardown run
ok 5 - shutdown run
ok
t/spaces.t .....................
ok 1 - can have spaces around attributes
1..1
ok
#
# Foo::Test->test1
#
# Foo::Test->test2
t/startup.t ....................
1..15
ok 1 - called start1
ok 2 - called start2
ok 3 - called setup1
ok 4 - called setup2
ok 5 - called test1
ok 6 - called tear1
ok 7 - called tear2
ok 8 - called setup1
ok 9 - called setup2
ok 10 - called test2
ok 11 - called tear1
ok 12 - called tear2
ok 13 - called end1
ok 14 - called end2
ok 15 - all expected methods ran
ok
t/startup_that_dies.t ..........
1..1
ok 1 - exception in startup method causes all tests to be skipped
ok
# Failed test 'exception in method, but teardown is still run'
# at t/teardown-when-test-dies.t line 29.
# STDERR is:
# #
# # TeardownWhenTestDies->my_test_method
# # Failed test 'my_test_method died (oops! at t/teardown-when-test-dies.t line 15.)'
# # at t/teardown-when-test-dies.t line 28.
# # (in TeardownWhenTestDies->my_test_method)
#
# not:
# /#\s+Failed\ test.*?\n?.*?at\ t\/teardown\-when\-test\-dies\.t line 28.*\n?/
# # (in TeardownWhenTestDies->my_test_method)
#
# as expected
t/teardown-when-test-dies.t ....
1..1
not ok 1 - exception in method, but teardown is still run
Failed 1/1 subtests
t/test_classes.t ...............
1..1
ok 1 - _test_classes deals with undef values
ok
t/test_deep.t ..................
1..1
ok 1 - Test::Deep is not included as a test class, even though isa always returns true
ok
t/test_method.t ................
1..4
ok 1 - $ENV{TEST_METHOD} with an invalid regex should die
ok 2 - no TEST_METHOD runs all tests
ok 3 - single match just runs one test
ok 4 - two matches run both tests
ok
t/test_verbose.t ...............
1..1
ok 1 - TEST_VERBOSE outputs method diagnostic
ok
#
# My::Test->Tests_attribute_default_number_of_tests
#
# My::Test->Tests_attribute_set_number_of_tests
t/Tests.t ......................
1..2
ok 1 - Tests attribute default number of tests
ok 2 - Tests attribute set number of tests
ok
# Test::More: 1.001009
t/todo.t .......................
1..2
ok 1 - todo tests work
ok 2 - todo_test should run 1 test
ok
Test Summary Report
-------------------
t/skip2.t (Wstat: 0 Tests: 4 Failed: 1)
Failed test: 1
t/teardown-when-test-dies.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
Files=57, Tests=189, 5 wallclock secs ( 0.23 usr 0.15 sys + 3.78 cusr 0.63 csys = 4.79 CPU)
Result: FAIL
Failed 2/57 test programs. 2/189 subtests failed.
make: *** [test_dynamic] Error 255
ETHER/Test-Class-0.50.tar.gz
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports ETHER/Test-Class-0.50.tar.gz
JSWARTZ/CHI-0.60.tar.gz
Has already been unwrapped into directory /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK
JSWARTZ/CHI-0.60.tar.gz
Has already been prepared
Running make for J/JS/JSWARTZ/CHI-0.60.tar.gz
Warning: Prerequisite 'Test::Class => 0' for 'JSWARTZ/CHI-0.60.tar.gz' failed when processing 'ETHER/Test-Class-0.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
>>> make
cp lib/CHI/t/GetError.pm blib/lib/CHI/t/GetError.pm
cp lib/CHI/t/Null.pm blib/lib/CHI/t/Null.pm
cp lib/CHI/t/Driver/NonMoose.pm blib/lib/CHI/t/Driver/NonMoose.pm
cp lib/CHI/t/Driver/FastMmap.pm blib/lib/CHI/t/Driver/FastMmap.pm
cp lib/CHI/Test/Driver/NonMoose.pm blib/lib/CHI/Test/Driver/NonMoose.pm
cp lib/CHI/Driver/CacheCache.pm blib/lib/CHI/Driver/CacheCache.pm
cp lib/CHI/Test/Driver/Role/CheckKeyValidity.pm blib/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm
cp lib/CHI/t/Subcache.pm blib/lib/CHI/t/Subcache.pm
cp lib/CHI/Driver/RawMemory.pm blib/lib/CHI/Driver/RawMemory.pm
cp lib/CHI/t/Bugs.pm blib/lib/CHI/t/Bugs.pm
cp lib/CHI/Test/Util.pm blib/lib/CHI/Test/Util.pm
cp lib/CHI/t/Driver/File/DepthZero.pm blib/lib/CHI/t/Driver/File/DepthZero.pm
cp lib/CHI/Driver/File.pm blib/lib/CHI/Driver/File.pm
cp lib/CHI/Test.pm blib/lib/CHI/Test.pm
cp lib/CHI/t/Driver/Subcache/l1_cache.pm blib/lib/CHI/t/Driver/Subcache/l1_cache.pm
cp lib/CHI/t/RequiredModules.pm blib/lib/CHI/t/RequiredModules.pm
cp lib/CHI/Driver/Memory.pm blib/lib/CHI/Driver/Memory.pm
cp lib/CHI/t/Subclass.pm blib/lib/CHI/t/Subclass.pm
cp lib/CHI/Driver/Base/CacheContainer.pm blib/lib/CHI/Driver/Base/CacheContainer.pm
cp lib/CHI/t/SetError.pm blib/lib/CHI/t/SetError.pm
cp lib/CHI/t/Driver/Memory.pm blib/lib/CHI/t/Driver/Memory.pm
cp lib/CHI/Driver/Metacache.pm blib/lib/CHI/Driver/Metacache.pm
cp lib/CHI.pm blib/lib/CHI.pm
cp lib/CHI/Test/Class.pm blib/lib/CHI/Test/Class.pm
cp lib/CHI/t/Sanity.pm blib/lib/CHI/t/Sanity.pm
cp lib/CHI/t/Driver/Subcache/mirror_cache.pm blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm
cp lib/CHI/t/Driver.pm blib/lib/CHI/t/Driver.pm
cp lib/CHI/t/Driver/Subcache.pm blib/lib/CHI/t/Driver/Subcache.pm
cp lib/CHI/Serializer/Storable.pm blib/lib/CHI/Serializer/Storable.pm
cp lib/CHI/Types.pm blib/lib/CHI/Types.pm
cp lib/CHI/Benchmarks.pod blib/lib/CHI/Benchmarks.pod
cp lib/CHI/t/Util.pm blib/lib/CHI/t/Util.pm
cp lib/CHI/t/Driver/CacheCache.pm blib/lib/CHI/t/Driver/CacheCache.pm
cp lib/CHI/t/Config.pm blib/lib/CHI/t/Config.pm
cp lib/CHI/Util.pm blib/lib/CHI/Util.pm
cp lib/CHI/Driver/FastMmap.pm blib/lib/CHI/Driver/FastMmap.pm
cp lib/CHI/Driver/Role/IsSizeAware.pm blib/lib/CHI/Driver/Role/IsSizeAware.pm
cp lib/CHI/Serializer/JSON.pm blib/lib/CHI/Serializer/JSON.pm
cp lib/CHI/Constants.pm blib/lib/CHI/Constants.pm
cp lib/CHI/Driver/Role/HasSubcaches.pm blib/lib/CHI/Driver/Role/HasSubcaches.pm
cp lib/CHI/Driver/Development.pod blib/lib/CHI/Driver/Development.pod
cp lib/CHI/t/Driver/File.pm blib/lib/CHI/t/Driver/File.pm
cp lib/CHI/Stats.pm blib/lib/CHI/Stats.pm
cp lib/CHI/Test/Driver/Readonly.pm blib/lib/CHI/Test/Driver/Readonly.pm
cp lib/CHI/t/Driver/RawMemory.pm blib/lib/CHI/t/Driver/RawMemory.pm
cp lib/CHI/CacheObject.pm blib/lib/CHI/CacheObject.pm
cp lib/CHI/Driver/Role/IsSubcache.pm blib/lib/CHI/Driver/Role/IsSubcache.pm
cp lib/CHI/Driver/Null.pm blib/lib/CHI/Driver/Null.pm
cp lib/CHI/Test/Driver/Writeonly.pm blib/lib/CHI/Test/Driver/Writeonly.pm
cp lib/CHI/t/Initialize.pm blib/lib/CHI/t/Initialize.pm
cp lib/CHI/t/Constants.pm blib/lib/CHI/t/Constants.pm
cp lib/CHI/Driver/Role/Universal.pm blib/lib/CHI/Driver/Role/Universal.pm
cp lib/CHI/Driver.pm blib/lib/CHI/Driver.pm
Manifying 15 pod documents
JSWARTZ/CHI-0.60.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing CHI 0.60, Perl 5.020001, /Users/fly2000/ap2000-298465/bin/perl-dynamic
t/00-load.t .............................
1..1
ok 1 - use CHI;
ok
t/author-03-pod.t ....................... skipped: these tests are for testing by the author
t/author-file-driver.t .................. skipped: these tests are for testing by the author
t/author-no-data-serializer.t ........... skipped: these tests are for testing by the author
t/author-RequiredModules.t .............. skipped: these tests are for testing by the author
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Bugs.pm line 7.
Compilation failed in require at t/Bugs.t line 2.
BEGIN failed--compilation aborted at t/Bugs.t line 2.
t/Bugs.t ................................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Config.pm line 8.
Compilation failed in require at t/Config.t line 2.
BEGIN failed--compilation aborted at t/Config.t line 2.
t/Config.t ..............................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Constants.pm line 6.
Compilation failed in require at t/Constants.t line 2.
BEGIN failed--compilation aborted at t/Constants.t line 2.
t/Constants.t ...........................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Memory.pm line 8.
Compilation failed in require at t/Driver-Memory.t line 2.
BEGIN failed--compilation aborted at t/Driver-Memory.t line 2.
t/Driver-Memory.t .......................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Memory.pm line 8.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/RawMemory.pm line 7.
Compilation failed in require at t/Driver-RawMemory.t line 2.
BEGIN failed--compilation aborted at t/Driver-RawMemory.t line 2.
t/Driver-RawMemory.t ....................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/GetError.pm line 7.
Compilation failed in require at t/GetError.t line 2.
BEGIN failed--compilation aborted at t/GetError.t line 2.
t/GetError.t ............................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Initialize.pm line 7.
Compilation failed in require at t/Initialize.t line 2.
BEGIN failed--compilation aborted at t/Initialize.t line 2.
t/Initialize.t ..........................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/release-dependent.t ................... skipped: these tests are for release candidate testing
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Sanity.pm line 6.
Compilation failed in require at t/Sanity.t line 2.
BEGIN failed--compilation aborted at t/Sanity.t line 2.
t/Sanity.t ..............................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/SetError.pm line 7.
Compilation failed in require at t/SetError.t line 2.
BEGIN failed--compilation aborted at t/SetError.t line 2.
t/SetError.t ............................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/CacheCache.pm line 7.
Compilation failed in require at t/smoke-Driver-CacheCache.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-CacheCache.t line 10.
t/smoke-Driver-CacheCache.t .............
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/FastMmap.pm line 8.
Compilation failed in require at t/smoke-Driver-FastMmap.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-FastMmap.t line 10.
t/smoke-Driver-FastMmap.t ...............
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/File.pm line 11.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/File/DepthZero.pm line 8.
Compilation failed in require at t/smoke-Driver-File-DepthZero.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-File-DepthZero.t line 10.
t/smoke-Driver-File-DepthZero.t .........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/File.pm line 11.
Compilation failed in require at t/smoke-Driver-File.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-File.t line 10.
t/smoke-Driver-File.t ...................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Memory.pm line 8.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/NonMoose.pm line 6.
Compilation failed in require at t/smoke-Driver-NonMoose.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-NonMoose.t line 10.
t/smoke-Driver-NonMoose.t ...............
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Subcache.pm line 6.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Subcache/l1_cache.pm line 8.
Compilation failed in require at t/smoke-Driver-Subcache-l1_cache.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-l1_cache.t line 10.
t/smoke-Driver-Subcache-l1_cache.t ......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver.pm line 17.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Subcache.pm line 6.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm line 7.
Compilation failed in require at t/smoke-Driver-Subcache-mirror_cache.t line 10.
BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-mirror_cache.t line 10.
t/smoke-Driver-Subcache-mirror_cache.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Null.pm line 6.
Compilation failed in require at t/smoke-Null.t line 10.
BEGIN failed--compilation aborted at t/smoke-Null.t line 10.
t/smoke-Null.t ..........................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Subcache.pm line 5.
Compilation failed in require at t/Subcache.t line 2.
BEGIN failed--compilation aborted at t/Subcache.t line 2.
t/Subcache.t ............................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Subclass.pm line 6.
Compilation failed in require at t/Subclass.t line 2.
BEGIN failed--compilation aborted at t/Subclass.t line 2.
t/Subclass.t ............................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Base class package "Test::Class" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/arch /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .).
at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/Test/Class.pm line 7.
Compilation failed in require at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 100.
...propagated at /Users/fly2000/cpanfly-5.20/var/megalib/base.pm line 109.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/CHI-0.60-AB1yxK/blib/lib/CHI/t/Util.pm line 9.
Compilation failed in require at t/Util.t line 2.
BEGIN failed--compilation aborted at t/Util.t line 2.
t/Util.t ................................
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/Bugs.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Config.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Constants.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Driver-Memory.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Driver-RawMemory.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/GetError.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Initialize.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Sanity.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/SetError.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-CacheCache.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-FastMmap.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-File-DepthZero.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-File.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-NonMoose.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-Subcache-l1_cache.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Driver-Subcache-mirror_cache.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/smoke-Null.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Subcache.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Subclass.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/Util.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=26, Tests=1, 6 wallclock secs ( 0.10 usr 0.07 sys + 4.92 cusr 0.64 csys = 5.73 CPU)
Result: FAIL
Failed 20/26 test programs. 0/1 subtests failed.
make: *** [test_dynamic] Error 2
JSWARTZ/CHI-0.60.tar.gz
one dependency not OK (Test::Class); additionally test harness failed
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports JSWARTZ/CHI-0.60.tar.gz
PERLANCAR/App-tracepm-0.20.tar.gz
Has already been unwrapped into directory /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-tracepm-0.20-B5oGHT
PERLANCAR/App-tracepm-0.20.tar.gz
Has already been prepared
Running make for P/PE/PERLANCAR/App-tracepm-0.20.tar.gz
Warning: Prerequisite 'CHI => 0' for 'PERLANCAR/App-tracepm-0.20.tar.gz' failed when processing 'JSWARTZ/CHI-0.60.tar.gz' with 'make_test => NO one dependency not OK (Test::Class); additionally test harness failed'. Continuing, but chances to succeed are limited.
>>> make
cp lib/App/tracepm/Tracer.pm blib/lib/App/tracepm/Tracer.pm
cp lib/App/tracepm.pm blib/lib/App/tracepm.pm
cp script/tracepm blib/script/tracepm
"/Users/fly2000/ap2000-298465/bin/perl-dynamic" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/tracepm
Manifying 1 pod document
Manifying 2 pod documents
PERLANCAR/App-tracepm-0.20.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ...........
1..3
ok 1 - App/tracepm.pm loaded ok
ok 2 - App/tracepm/Tracer.pm loaded ok
ok 3 - script/tracepm compiled ok
ok
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/release-rinci.t ........ skipped: these tests are for release candidate testing
All tests successful.
Files=4, Tests=3, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.13 cusr 0.05 csys = 0.23 CPU)
Result: PASS
PERLANCAR/App-tracepm-0.20.tar.gz
Tests succeeded but one dependency not OK (CHI)
PERLANCAR/App-tracepm-0.20.tar.gz
[dependencies] -- NA
Running test for module 'Module::DataPack'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Module-DataPack-0.21.tar.gz
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/P/PE/PERLANCAR/Module-DataPack-0.21.tar.gz ok
Module-DataPack-0.21/
Module-DataPack-0.21/Changes
Module-DataPack-0.21/lib/
Module-DataPack-0.21/lib/Module/
Module-DataPack-0.21/lib/Module/DataPack.pm
Module-DataPack-0.21/README
Module-DataPack-0.21/MANIFEST
Module-DataPack-0.21/dist.ini
Module-DataPack-0.21/Makefile.PL
Module-DataPack-0.21/t/
Module-DataPack-0.21/t/author-pod-coverage.t
Module-DataPack-0.21/t/00-compile.t
Module-DataPack-0.21/t/author-pod-syntax.t
Module-DataPack-0.21/t/release-rinci.t
Module-DataPack-0.21/LICENSE
Module-DataPack-0.21/META.yml
Module-DataPack-0.21/META.json
Module-DataPack-0.21/weaver.ini
Configuring P/PE/PERLANCAR/Module-DataPack-0.21.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Module::DataPack
Writing MYMETA.yml and MYMETA.json
PERLANCAR/Module-DataPack-0.21.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Module-DataPack-0.21.tar.gz
>>> make
cp lib/Module/DataPack.pm blib/lib/Module/DataPack.pm
Manifying 1 pod document
PERLANCAR/Module-DataPack-0.21.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ...........
1..1
ok 1 - Module/DataPack.pm loaded ok
ok
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/release-rinci.t ........ skipped: these tests are for release candidate testing
All tests successful.
Files=4, Tests=1, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.10 cusr 0.03 csys = 0.18 CPU)
Result: PASS
PERLANCAR/Module-DataPack-0.21.tar.gz
make test TEST_VERBOSE=1 -- OK
perlancar <perlancar@gmail.com>Like Module::FatPack, but uses datapacking instead of fatpack
>>> (cd /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC && tar cvf - Module-DataPack-0.21.ppd blib) | gzip -c >/Users/fly2000/cpanfly-5.20/var/REPO/P/PE/PERLANCAR/Module-DataPack-0.21.tar.gz
Module-DataPack-0.21.ppd
blib/
blib/lib/
blib/lib/Module/
blib/lib/Module/DataPack.pm
blib/man3/
blib/man3/Module::DataPack.3
Running test for module 'Module::FatPack'
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'get'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Module-FatPack-0.17.tar.gz
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/P/PE/PERLANCAR/Module-FatPack-0.17.tar.gz ok
Module-FatPack-0.17/
Module-FatPack-0.17/Changes
Module-FatPack-0.17/lib/
Module-FatPack-0.17/lib/Module/
Module-FatPack-0.17/lib/Module/FatPack.pm
Module-FatPack-0.17/README
Module-FatPack-0.17/MANIFEST
Module-FatPack-0.17/dist.ini
Module-FatPack-0.17/Makefile.PL
Module-FatPack-0.17/t/
Module-FatPack-0.17/t/author-pod-coverage.t
Module-FatPack-0.17/t/01-basic.t
Module-FatPack-0.17/t/00-compile.t
Module-FatPack-0.17/t/author-pod-syntax.t
Module-FatPack-0.17/t/release-rinci.t
Module-FatPack-0.17/LICENSE
Module-FatPack-0.17/META.yml
Module-FatPack-0.17/META.json
Module-FatPack-0.17/weaver.ini
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'prepare'
Configuring P/PE/PERLANCAR/Module-FatPack-0.17.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Module::FatPack
Writing MYMETA.yml and MYMETA.json
PERLANCAR/Module-FatPack-0.17.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Module-FatPack-0.17.tar.gz
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Module/FatPack.pm blib/lib/Module/FatPack.pm
Manifying 1 pod document
PERLANCAR/Module-FatPack-0.17.tar.gz
make -- OK
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ...........
1..1
ok 1 - Module/FatPack.pm loaded ok
ok
Undefined subroutine &Foo::Bar::f2 called at t/01-basic.t line 76.
# Child (opt:pm) exited without calling finalize()
# Failed test 'opt:pm'
# at /Users/fly2000/cpanfly-5.20/var/megalib/Test/Builder.pm line 279.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 2.
t/01-basic.t .............
# Subtest: default options
ok 1 - status
ok 2 - hook installed at the beginning
ok 3 - module code loaded 1
ok 4 - module code loaded 2
1..4
ok 1 - default options
# Subtest: opt:pm
ok 1 - status 1
ok 2 - status 2
ok 3 - hook installed at the end
not ok 2 - opt:pm
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/2 subtests
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/release-rinci.t ........ skipped: these tests are for release candidate testing
Test Summary Report
-------------------
t/01-basic.t (Wstat: 65280 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=5, Tests=3, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.11 cusr 0.04 csys = 0.20 CPU)
Result: FAIL
Failed 1/5 test programs. 1/3 subtests failed.
make: *** [test_dynamic] Error 255
PERLANCAR/Module-FatPack-0.17.tar.gz
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports PERLANCAR/Module-FatPack-0.17.tar.gz
Running test for module 'Perinci::CmdLine::Lite'
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'get'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz ok
Perinci-CmdLine-Lite-1.76/
Perinci-CmdLine-Lite-1.76/Changes
Perinci-CmdLine-Lite-1.76/lib/
Perinci-CmdLine-Lite-1.76/lib/Perinci/
Perinci-CmdLine-Lite-1.76/lib/Perinci/CmdLine/
Perinci-CmdLine-Lite-1.76/lib/Perinci/CmdLine/Base.pm
Perinci-CmdLine-Lite-1.76/lib/Perinci/CmdLine/Lite.pm
Perinci-CmdLine-Lite-1.76/README
Perinci-CmdLine-Lite-1.76/MANIFEST
Perinci-CmdLine-Lite-1.76/share/
Perinci-CmdLine-Lite-1.76/share/templates/
Perinci-CmdLine-Lite-1.76/share/templates/description.txt
Perinci-CmdLine-Lite-1.76/share/templates/synopsis.txt
Perinci-CmdLine-Lite-1.76/dist.ini
Perinci-CmdLine-Lite-1.76/Makefile.PL
Perinci-CmdLine-Lite-1.76/t/
Perinci-CmdLine-Lite-1.76/t/author-pod-coverage.t
Perinci-CmdLine-Lite-1.76/t/suite.t
Perinci-CmdLine-Lite-1.76/t/00-compile.t
Perinci-CmdLine-Lite-1.76/t/author-pod-syntax.t
Perinci-CmdLine-Lite-1.76/LICENSE
Perinci-CmdLine-Lite-1.76/devscripts/
Perinci-CmdLine-Lite-1.76/devscripts/bench-startup
Perinci-CmdLine-Lite-1.76/META.yml
Perinci-CmdLine-Lite-1.76/META.json
Perinci-CmdLine-Lite-1.76/weaver.ini
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'prepare'
Configuring P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Warning: prerequisite Progress::Any::Output::TermProgressBarColor 0.17 not found. We have 0.10.
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Perinci::CmdLine::Lite
Writing MYMETA.yml and MYMETA.json
PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'make'
---- Unsatisfied dependencies detected during ----
---- PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz ----
Progress::Any::Output::TermProgressBarColor [requires]
Running test for module 'Progress::Any::Output::TermProgressBarColor'
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'get'
Checksum for /Users/fly2000/cpanfly-5.20/var/cpan/sources/authors/id/P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz ok
Progress-Any-Output-TermProgressBarColor-0.23/
Progress-Any-Output-TermProgressBarColor-0.23/README
Progress-Any-Output-TermProgressBarColor-0.23/lib/
Progress-Any-Output-TermProgressBarColor-0.23/lib/Progress/
Progress-Any-Output-TermProgressBarColor-0.23/lib/Progress/Any/
Progress-Any-Output-TermProgressBarColor-0.23/lib/Progress/Any/Output/
Progress-Any-Output-TermProgressBarColor-0.23/lib/Progress/Any/Output/TermProgressBarColor.pm
Progress-Any-Output-TermProgressBarColor-0.23/Makefile.PL
Progress-Any-Output-TermProgressBarColor-0.23/Changes
Progress-Any-Output-TermProgressBarColor-0.23/dist.ini
Progress-Any-Output-TermProgressBarColor-0.23/LICENSE
Progress-Any-Output-TermProgressBarColor-0.23/t/
Progress-Any-Output-TermProgressBarColor-0.23/t/00-compile.t
Progress-Any-Output-TermProgressBarColor-0.23/t/01-basic.t
Progress-Any-Output-TermProgressBarColor-0.23/t/author-pod-syntax.t
Progress-Any-Output-TermProgressBarColor-0.23/t/author-pod-coverage.t
Progress-Any-Output-TermProgressBarColor-0.23/weaver.ini
Progress-Any-Output-TermProgressBarColor-0.23/MANIFEST
Progress-Any-Output-TermProgressBarColor-0.23/META.json
Progress-Any-Output-TermProgressBarColor-0.23/META.yml
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'prepare'
Configuring P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz with Makefile.PL
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2000/cpanfly-5.20/var/megalib
Want /Users/fly2000/ap2000-298465/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Progress::Any::Output::TermProgressBarColor
Writing MYMETA.yml and MYMETA.json
PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Progress/Any/Output/TermProgressBarColor.pm blib/lib/Progress/Any/Output/TermProgressBarColor.pm
Manifying 1 pod document
PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz
make -- OK
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ...........
1..1
ok 1 - Progress/Any/Output/TermProgressBarColor.pm loaded ok
ok
# Failed test at t/01-basic.t line 18.
# ' 10% []1s left [0m'
# doesn't match '(?^:foo)'
# Looks like you failed 1 test of 2.
# Failed test 'default'
# at t/01-basic.t line 20.
# Failed test at t/01-basic.t line 28.
# 'Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2000/cpanfly-5.20/var/megalib/Color/ANSI/Util.pm line 285.
# Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2000/cpanfly-5.20/var/megalib/Color/ANSI/Util.pm line 287.
# Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2000/cpanfly-5.20/var/megalib/Color/ANSI/Util.pm line 289.
# Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2000/cpanfly-5.20/var/megalib/Color/ANSI/Util.pm line 285.
# Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2000/cpanfly-5.20/var/megalib/Color/ANSI/Util.pm line 287.
# Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2000/cpanfly-5.20/var/megalib/Color/ANSI/Util.pm line 289.
# 20% []1s left [0m'
# doesn't match '(?^:foo)'
# Looks like you failed 1 test of 2.
# Failed test 'fh option'
# at t/01-basic.t line 30.
# Failed test at t/01-basic.t line 41.
# ' 30% []1s left [0m'
# doesn't match '(?^:foo)'
# Looks like you failed 1 test of 2.
# Failed test 'default (wide)'
# at t/01-basic.t line 43.
# Looks like you failed 3 tests of 3.
t/01-basic.t .............
# Subtest: default
not ok 1
ok 2
1..2
not ok 1 - default
# Subtest: fh option
not ok 1
ok 2
1..2
not ok 2 - fh option
# Subtest: default (wide)
not ok 1
ok 2
1..2
not ok 3 - default (wide)
1..3
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
Test Summary Report
-------------------
t/01-basic.t (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
Files=4, Tests=4, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.23 cusr 0.05 csys = 0.33 CPU)
Result: FAIL
Failed 1/4 test programs. 3/4 subtests failed.
make: *** [test_dynamic] Error 255
PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz
PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
Has already been unwrapped into directory /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp
PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
Has already been prepared
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'make'
Warning: Prerequisite 'Progress::Any::Output::TermProgressBarColor => 0.17' for 'PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz' failed when processing 'PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.23.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
>>> make
cp share/templates/synopsis.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt
cp share/templates/description.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt
cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm
cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm
Manifying 2 pod documents
PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
make -- OK
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt (unchanged)
Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt (unchanged)
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ...........
1..2
ok 1 - Perinci/CmdLine/Base.pm loaded ok
ok 2 - Perinci/CmdLine/Lite.pm loaded ok
ok
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/suite.t ................
# Subtest: help action
ok 1 - dummy
# Subtest: --help
# Generated CLI script at /tmp/jR2g_jFJoI/cliWQluKdKb
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliWQluKdKb',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/noop'
# }
# argv: [
# '--help'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - --help
# Subtest: + is not accepted as option starter
# Generated CLI script at /tmp/jR2g_jFJoI/clieca39IIE
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clieca39IIE',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/noop'
# }
# argv: [
# '+h'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 3 - + is not accepted as option starter
# Subtest: + is not accepted as option starter (2)
# Generated CLI script at /tmp/jR2g_jFJoI/cli8wljfjMu
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli8wljfjMu',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/noop'
# }
# argv: [
# '+help'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 4 - + is not accepted as option starter (2)
# Subtest: extra args is okay
# Generated CLI script at /tmp/jR2g_jFJoI/cliPfqSsCNw
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliPfqSsCNw',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/noop'
# }
# argv: [
# '--help',
# '1',
# '2',
# '3'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - extra args is okay
# Subtest: help for cli with subcommands
# Generated CLI script at /tmp/jR2g_jFJoI/cliry8VrtPb
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliry8VrtPb',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'sc1' => '/Perinci/Examples/Tiny/noop'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# '--help'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 6 - help for cli with subcommands
# Subtest: help on a subcommand
# Generated CLI script at /tmp/jR2g_jFJoI/cliwfZcRa6f
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliwfZcRa6f',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'sc1' => '/Perinci/Examples/Tiny/noop'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# 'sc1',
# '--help'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
ok 3 - stdout_unlike
1..3
ok 7 - help on a subcommand
1..7
ok 1 - help action
# Subtest: version action
ok 1 - dummy
# Subtest: --version
# Generated CLI script at /tmp/jR2g_jFJoI/cli5IHgTjY4
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli5IHgTjY4',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/noop'
# }
# argv: [
# '--version'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - --version
1..2
ok 2 - version action
# Subtest: subcommands action
ok 1 - dummy
# Subtest: --subcommands
# Generated CLI script at /tmp/jR2g_jFJoI/clikEvzJ9UE
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clikEvzJ9UE',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'noop' => '/Perinci/Examples/Tiny/noop',
# 'odd_even' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# '--subcommands'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - --subcommands
# Subtest: unknown subcommand = error
# Generated CLI script at /tmp/jR2g_jFJoI/cliTjVNseYF
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliTjVNseYF',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'noop' => '/Perinci/Examples/Tiny/noop',
# 'odd_even' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# 'foo'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 3 - unknown subcommand = error
# Subtest: default_subcommand
# Generated CLI script at /tmp/jR2g_jFJoI/cliPVh2SzuG
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'default_subcommand' => 'noop',
# 'output_file' => '/tmp/jR2g_jFJoI/cliPVh2SzuG',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'noop' => '/Perinci/Examples/Tiny/noop',
# 'odd_even' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: []
# Script's stdout: <>
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - default_subcommand
# Subtest: default_subcommand 2
# Generated CLI script at /tmp/jR2g_jFJoI/cliv0p_bp1q
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'default_subcommand' => 'odd_even',
# 'output_file' => '/tmp/jR2g_jFJoI/cliv0p_bp1q',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'noop' => '/Perinci/Examples/Tiny/noop',
# 'odd_even' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 5 - default_subcommand 2
1..5
ok 3 - subcommands action
# Subtest: call action
ok 1 - dummy
# Subtest: embedded function+meta works
# Generated CLI script at /tmp/jR2g_jFJoI/clifsBhpP3f
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'code_before_instantiate_cmdline' => '
# our %SPEC;
# $SPEC{square} = {v=>1.1, args=>{num=>{schema=>\'num*\', req=>1, pos=>0}}};
# sub square { my %args=@_; [200, "OK", $args{num}**2] }
# ',
# 'output_file' => '/tmp/jR2g_jFJoI/clifsBhpP3f',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/main/square'
# }
# argv: [
# '12'
# ]
# Script's stdout: <144
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - embedded function+meta works
# Subtest: extra args not allowed
# Generated CLI script at /tmp/jR2g_jFJoI/cliuDDjdchb
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliuDDjdchb',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/noop'
# }
# argv: [
# '1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 3 - extra args not allowed
# Subtest: missing required args -> error
# Generated CLI script at /tmp/jR2g_jFJoI/clisLYd8or3
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clisLYd8or3',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/odd_even'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 4 - missing required args -> error
# Subtest: common option: --format
# Generated CLI script at /tmp/jR2g_jFJoI/cliwl8X9aL3
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliwl8X9aL3',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/Args/as_is'
# }
# argv: [
# '--arg',
# 'abc',
# '--format',
# 'json'
# ]
# Script's stdout: <[200,"OK","abc",{"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - common option: --format
# Subtest: common option: --json
# Generated CLI script at /tmp/jR2g_jFJoI/cliWlCIk0yH
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliWlCIk0yH',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/Args/as_is'
# }
# argv: [
# '--arg',
# 'abc',
# '--json'
# ]
# Script's stdout: <[200,"OK","abc",{"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 6 - common option: --json
# Subtest: common option: --naked-res
# Generated CLI script at /tmp/jR2g_jFJoI/cliulWGzGlQ
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliulWGzGlQ',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/Args/as_is'
# }
# argv: [
# '--arg',
# 'abc',
# '--json',
# '--naked-res'
# ]
# Script's stdout: <"abc"
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 7 - common option: --naked-res
# Subtest: common option: --no-naked-res
# Generated CLI script at /tmp/jR2g_jFJoI/clij1HJKKP_
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clij1HJKKP_',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/Args/as_is'
# }
# argv: [
# '--arg',
# 'abc',
# '--json',
# '--no-naked-res'
# ]
# Script's stdout: <[200,"OK","abc",{"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 8 - common option: --no-naked-res
# Subtest: common option: --cmd
# Generated CLI script at /tmp/jR2g_jFJoI/cliHkddFE3V
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'default_subcommand' => 'noop',
# 'output_file' => '/tmp/jR2g_jFJoI/cliHkddFE3V',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'noop' => '/Perinci/Examples/Tiny/noop',
# 'odd_even' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# '--cmd',
# 'odd_even',
# '5'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 9 - common option: --cmd
# Subtest: json argument
# Generated CLI script at /tmp/jR2g_jFJoI/cli1vW3_Ef2
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli1vW3_Ef2',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/Args/as_is'
# }
# argv: [
# '--arg-json',
# '["a","b"]',
# '--json'
# ]
# Script's stdout: <[200,"OK",["a","b"],{"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 10 - json argument
# Subtest: can handle function which returns naked result
# Generated CLI script at /tmp/jR2g_jFJoI/clin3K6mF_l
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clin3K6mF_l',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/hello_naked'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 11 - can handle function which returns naked result
1..11
ok 4 - call action
# Subtest: cmdline_src (error cases)
ok 1 - dummy
# Subtest: unknown value
# Generated CLI script at /tmp/jR2g_jFJoI/cliebtoYuI1
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliebtoYuI1',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_unknown'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 2 - unknown value
# Subtest: arg type not str/array
# Generated CLI script at /tmp/jR2g_jFJoI/cliioNAwRC4
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliioNAwRC4',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_invalid_arg_type'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 3 - arg type not str/array
# Subtest: multiple stdin
# Generated CLI script at /tmp/jR2g_jFJoI/cliYOm1xWwq
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliYOm1xWwq',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_multi_stdin'
# }
# argv: [
# 'a',
# 'b'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 4 - multiple stdin
1..4
ok 5 - cmdline_src (error cases)
# Subtest: cmdline_src (file)
ok 1 - dummy
# Subtest: file 1
# Generated CLI script at /tmp/jR2g_jFJoI/cli97ljfnEa
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli97ljfnEa',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file'
# }
# argv: [
# '--a1',
# '/tmp/jR2g_jFJoI/infile1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - file 1
# Subtest: file 1 (special hint arguments passed)
# Generated CLI script at /tmp/jR2g_jFJoI/cliKYs4AA1g
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliKYs4AA1g',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file'
# }
# argv: [
# '--json',
# '--a1',
# '/tmp/jR2g_jFJoI/infile1'
# ]
# Script's stdout: <[200,"OK","a1=foo\na2=[]",{"func.args":{"-cmdline_src_a1":"file","-cmdline_srcfilenames_a1":["/tmp/jR2g_jFJoI/infile1"],"a1":"foo"},"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
ok 3 - stdout_like
1..3
ok 3 - file 1 (special hint arguments passed)
# Subtest: file 2
# Generated CLI script at /tmp/jR2g_jFJoI/clisElLHSO3
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clisElLHSO3',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file'
# }
# argv: [
# '--a1',
# '/tmp/jR2g_jFJoI/infile1',
# '--a2',
# '/tmp/jR2g_jFJoI/infile2'
# ]
# Script's stdout:
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - file 2
# Subtest: file 2 (special hint arguments passed)
# Generated CLI script at /tmp/jR2g_jFJoI/cli1RXuADoO
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli1RXuADoO',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file'
# }
# argv: [
# '--json',
# '--a1',
# '/tmp/jR2g_jFJoI/infile1',
# '--a2',
# '/tmp/jR2g_jFJoI/infile2'
# ]
# Script's stdout: <[200,"OK","a1=foo\na2=[bar\n,baz]",{"func.args":{"-cmdline_src_a1":"file","-cmdline_src_a2":"file","-cmdline_srcfilenames_a1":["/tmp/jR2g_jFJoI/infile1"],"-cmdline_srcfilenames_a2":["/tmp/jR2g_jFJoI/infile2"],"a1":"foo","a2":["bar\n","baz"]},"stream":0}]
# >
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
ok 3 - stdout_like
ok 4 - stdout_like
ok 5 - stdout_like
1..5
ok 5 - file 2 (special hint arguments passed)
# Subtest: file not found
# Generated CLI script at /tmp/jR2g_jFJoI/cliT_lXScR5
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliT_lXScR5',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file'
# }
# argv: [
# '--a1',
# '/tmp/jR2g_jFJoI/infile1/x'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 6 - file not found
# Subtest: file, missing required arg
# Generated CLI script at /tmp/jR2g_jFJoI/cliispQIwZ3
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliispQIwZ3',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file'
# }
# argv: [
# '--a2',
# '/tmp/jR2g_jFJoI/infile2'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 7 - file, missing required arg
1..7
ok 6 - cmdline_src (file)
# Subtest: cmdline_src (stdin)
ok 1 - dummy
# Subtest: stdin str
# Generated CLI script at /tmp/jR2g_jFJoI/cliypfRhvWV
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliypfRhvWV',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - stdin str
# Subtest: stdin str (special hint arguments passed)
# Generated CLI script at /tmp/jR2g_jFJoI/cli5q8XqYkn
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli5q8XqYkn',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str'
# }
# argv: [
# '--json'
# ]
# Script's stdout: <[200,"OK","a1=bar\nbaz",{"func.args":{"-cmdline_src_a1":"stdin","a1":"bar\nbaz"},"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - stdin str (special hint arguments passed)
# Subtest: stdin array
# Generated CLI script at /tmp/jR2g_jFJoI/cliFqWOqmG0
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliFqWOqmG0',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_array'
# }
# argv: []
# Script's stdout:
# Script's stderr: line 2.
# >
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - stdin array
# Subtest: stdin + arg set to "-"
# Generated CLI script at /tmp/jR2g_jFJoI/cliJnBsL6lC
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliJnBsL6lC',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str'
# }
# argv: [
# '--a1',
# '-'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - stdin + arg set to "-"
# Subtest: stdin + arg set to non "-"
# Generated CLI script at /tmp/jR2g_jFJoI/clirXkUgtku
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clirXkUgtku',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str'
# }
# argv: [
# '--a1',
# 'x'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 6 - stdin + arg set to non "-"
1..6
ok 7 - cmdline_src (stdin)
# Subtest: cmdline_src (stdin_line)
ok 1 - dummy
# Subtest: stdin_line + from stdin
# Generated CLI script at /tmp/jR2g_jFJoI/cli_526zhfp
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli_526zhfp',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line'
# }
# argv: [
# '--a2',
# 'bar'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - stdin_line + from stdin
# Subtest: stdin_line + from stdin (special hint arguments passed)
# Generated CLI script at /tmp/jR2g_jFJoI/clixT5njzun
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clixT5njzun',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line'
# }
# argv: [
# '--json',
# '--a2',
# 'bar'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - stdin_line + from stdin (special hint arguments passed)
# Subtest: stdin_line + from cmdline
# Generated CLI script at /tmp/jR2g_jFJoI/cli8Vv238fZ
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli8Vv238fZ',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line'
# }
# argv: [
# '--a2',
# 'bar',
# '--a1',
# 'qux'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - stdin_line + from cmdline
# Subtest: multi stdin_line
# Generated CLI script at /tmp/jR2g_jFJoI/cliYG33UYKd
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliYG33UYKd',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_multi_stdin_line'
# }
# argv: [
# '--a3',
# 'baz'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - multi stdin_line
1..5
ok 8 - cmdline_src (stdin_line)
# Subtest: cmdline_src (stdin_or_file)
ok 1 - dummy
# Subtest: stdin_or_file file
# Generated CLI script at /tmp/jR2g_jFJoI/clismU3EpU8
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clismU3EpU8',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - stdin_or_file file
# Subtest: stdin_or_file file (extra argument)
# Generated CLI script at /tmp/jR2g_jFJoI/cliRbe41xpi
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliRbe41xpi',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile1',
# '/tmp/jR2g_jFJoI/infile1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - stdin_or_file file (extra argument)
# Subtest: stdin_or_file file (special hint arguments passed)
# Generated CLI script at /tmp/jR2g_jFJoI/cliUTZQJjpN
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliUTZQJjpN',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str'
# }
# argv: [
# '--json',
# '/tmp/jR2g_jFJoI/infile1'
# ]
# Script's stdout: <[200,"OK","a1=foo",{"func.args":{"-cmdline_src_a1":"stdin_or_file","-cmdline_srcfilenames_a1":["/tmp/jR2g_jFJoI/infile1"],"a1":"foo"},"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
ok 3 - stdout_like
1..3
ok 4 - stdin_or_file file (special hint arguments passed)
# Subtest: stdin_or_files file not found
# Generated CLI script at /tmp/jR2g_jFJoI/cliEOZ1QJew
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliEOZ1QJew',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile1/x'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 5 - stdin_or_files file not found
# Subtest: stdin_or_file stdin str
# Generated CLI script at /tmp/jR2g_jFJoI/cli1vXhWUYu
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli1vXhWUYu',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 6 - stdin_or_file stdin str
# Subtest: stdin_or_file stdin str
# Generated CLI script at /tmp/jR2g_jFJoI/cliNR4Dr8tf
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliNR4Dr8tf',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_array'
# }
# argv: []
# Script's stdout:
# Script's stderr: line 2.
# >
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 7 - stdin_or_file stdin str
1..7
ok 9 - cmdline_src (stdin_or_file)
# Subtest: cmdline_src (stdin_or_files)
ok 1 - dummy
# Subtest: stdin_or_files file
# Generated CLI script at /tmp/jR2g_jFJoI/clicj0FR5Pi
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clicj0FR5Pi',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_array'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile1',
# '/tmp/jR2g_jFJoI/infile2'
# ]
# Script's stdout:
# Script's stderr: line 3.
# >
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - stdin_or_files file
# Subtest: stdin_or_files file (special hint arguments passed)
# Generated CLI script at /tmp/jR2g_jFJoI/cliVRLTvLzk
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliVRLTvLzk',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str'
# }
# argv: [
# '--json',
# '/tmp/jR2g_jFJoI/infile1'
# ]
# Script's stdout: <[200,"OK","a1=foo",{"func.args":{"-cmdline_src_a1":"stdin_or_files","-cmdline_srcfilenames_a1":["/tmp/jR2g_jFJoI/infile1"],"a1":"foo"},"stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
ok 3 - stdout_like
1..3
ok 3 - stdin_or_files file (special hint arguments passed)
# Subtest: stdin_or_files file not found
# Generated CLI script at /tmp/jR2g_jFJoI/cli9NCWTnGi
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli9NCWTnGi',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile1/x'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 4 - stdin_or_files file not found
# Subtest: stdin_or_files stdin str
# Generated CLI script at /tmp/jR2g_jFJoI/cliuw6jPQU5
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliuw6jPQU5',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - stdin_or_files stdin str
# Subtest: stdin_or_files stdin str
# Generated CLI script at /tmp/jR2g_jFJoI/cli2gcZ_6C1
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli2gcZ_6C1',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_array'
# }
# argv: []
# Script's stdout:
# Script's stderr: line 2.
# >
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 6 - stdin_or_files stdin str
1..6
ok 10 - cmdline_src (stdin_or_files)
# Subtest: cmdline_src (stdin_or_args)
ok 1 - dummy
# Subtest: from arg
# Generated CLI script at /tmp/jR2g_jFJoI/cliKFSiKdfr
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliKFSiKdfr',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_args_array'
# }
# argv: [
# '--a1',
# 'x'
# ]
# Script's stdout:
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - from arg
# Subtest: from stdin
# Generated CLI script at /tmp/jR2g_jFJoI/clifCJ6nxxd
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clifCJ6nxxd',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_args_array'
# }
# argv: []
# Script's stdout:
# Script's stderr: line 2.
# >
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - from stdin
1..3
ok 11 - cmdline_src (stdin_or_args)
# Subtest: dry-run
ok 1 - dummy
# Subtest: dry-run (via env, 0)
# Generated CLI script at /tmp/jR2g_jFJoI/cliPQly7XFV
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliPQly7XFV',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/test_dry_run'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - dry-run (via env, 0)
# Subtest: dry-run (via env, 1)
# Generated CLI script at /tmp/jR2g_jFJoI/clil1Ny9OdF
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clil1Ny9OdF',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/test_dry_run'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - dry-run (via env, 1)
# Subtest: dry-run (via cmdline opt)
# Generated CLI script at /tmp/jR2g_jFJoI/cli_dU9YZuu
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli_dU9YZuu',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/test_dry_run'
# }
# argv: [
# '--dry-run'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - dry-run (via cmdline opt)
1..4
ok 12 - dry-run
# Subtest: tx
ok 1 - dummy
# Subtest: dry_run (using tx) (w/o)
1..0 # SKIP Has one of the exclude_tag: tx
ok 2 # skip Has one of the exclude_tag: tx
# Subtest: dry_run (using tx) (w/)
1..0 # SKIP Has one of the exclude_tag: tx
ok 3 # skip Has one of the exclude_tag: tx
1..3
ok 13 - tx
# Subtest: streaming
ok 1 - dummy
# Subtest: stream input, simple type, chomp on
# Generated CLI script at /tmp/jR2g_jFJoI/cliXBHqMjiU
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliXBHqMjiU',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Stream/count_lines'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile-str'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - stream input, simple type, chomp on
# Subtest: stream input, simple type, chomp off
# Generated CLI script at /tmp/jR2g_jFJoI/cliezajH1gG
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliezajH1gG',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Stream/wc'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile-str'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - stream input, simple type, chomp off
# Subtest: stream input, json stream
# Generated CLI script at /tmp/jR2g_jFJoI/cliL74aFJSG
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliL74aFJSG',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Stream/wc_keys'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile-hash-json'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - stream input, json stream
# Subtest: stream input, simple type, word validation
1..0 # SKIP Has one of the exclude_tag: validate-streaming-input
ok 5 # skip Has one of the exclude_tag: validate-streaming-input
# Subtest: stream input, simple types, word validation, error
1..0 # SKIP Has one of the exclude_tag: validate-streaming-input
ok 6 # skip Has one of the exclude_tag: validate-streaming-input
# Subtest: stream input, simple types, word validation, error
1..0 # SKIP Has one of the exclude_tag: validate-streaming-input
ok 7 # skip Has one of the exclude_tag: validate-streaming-input
# Subtest: stream input, json stream, error
1..0 # SKIP Has one of the exclude_tag: validate-streaming-input
ok 8 # skip Has one of the exclude_tag: validate-streaming-input
# Subtest: stream result, simple types, word validation
1..0 # SKIP Has one of the exclude_tag: validate-streaming-result
ok 9 # skip Has one of the exclude_tag: validate-streaming-result
# Subtest: stream result, simple types, word validation, error
1..0 # SKIP Has one of the exclude_tag: validate-streaming-result
ok 10 # skip Has one of the exclude_tag: validate-streaming-result
# Subtest: stream result, json stream
# Generated CLI script at /tmp/jR2g_jFJoI/clieLyUCouv
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clieLyUCouv',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Stream/produce_hashes'
# }
# argv: [
# '-n',
# '3'
# ]
# Script's stdout: <{"num":1}
# {"num":2}
# {"num":3}
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 11 - stream result, json stream
# Subtest: stream input+result, simple type, float validation
# Generated CLI script at /tmp/jR2g_jFJoI/cliPIaJP9Ze
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliPIaJP9Ze',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Stream/square_nums'
# }
# argv: [
# '/tmp/jR2g_jFJoI/infile-int'
# ]
# Script's stdout: <1
# 9
# 25
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 12 - stream input+result, simple type, float validation
# Subtest: stream input+result, simple type, float validation, error
1..0 # SKIP Has one of the exclude_tag: validate-streaming-input
ok 13 # skip Has one of the exclude_tag: validate-streaming-input
1..13
ok 14 - streaming
# Subtest: result metadata
ok 1 - dummy
# Subtest: cmdline.exit_code
# Generated CLI script at /tmp/jR2g_jFJoI/climXqFZ0Ip
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/climXqFZ0Ip',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineResMeta/exit_code'
# }
# argv: []
# Script's stdout: <>
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 2 - cmdline.exit_code
# Subtest: cmdline.result
# Generated CLI script at /tmp/jR2g_jFJoI/cliaVSgDSf2
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliaVSgDSf2',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineResMeta/result'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - cmdline.result
# Subtest: cmdline.default_format
# Generated CLI script at /tmp/jR2g_jFJoI/clieQCpjsoZ
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clieQCpjsoZ',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineResMeta/default_format'
# }
# argv: []
# Script's stdout: <[200,"OK",null,{"cmdline.default_format":"json","stream":0}]
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - cmdline.default_format
# Subtest: cmdline.default_format (overriden by cmdline opt)
# Generated CLI script at /tmp/jR2g_jFJoI/cliTEEII6jh
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliTEEII6jh',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineResMeta/default_format'
# }
# argv: [
# '--format',
# 'text'
# ]
# Script's stdout: <>
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - cmdline.default_format (overriden by cmdline opt)
# Subtest: cmdline.skip_format
# Generated CLI script at /tmp/jR2g_jFJoI/cliqMdJOs1A
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliqMdJOs1A',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/CmdLineResMeta/skip_format'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 6 - cmdline.skip_format
1..6
ok 15 - result metadata
# Subtest: completion
ok 1 - dummy
# Subtest: self-completion works
# Generated CLI script at /tmp/jR2g_jFJoI/cliDrsbBVs0
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliDrsbBVs0',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'url' => '/Perinci/Examples/Tiny/odd_even'
# }
# argv: []
# Script's stdout: <--number
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - answer
1..2
ok 2 - self-completion works
# Subtest: completion of subcommand name
# Generated CLI script at /tmp/jR2g_jFJoI/clipADu81os
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clipADu81os',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'sc1' => '/Perinci/Examples/Tiny/noop',
# 'sc2' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - answer
1..2
ok 3 - completion of subcommand name
# Subtest: completion of subcommand option
# Generated CLI script at /tmp/jR2g_jFJoI/clihyvZOKpi
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clihyvZOKpi',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 0,
# 'subcommands' => {
# 'sc1' => '/Perinci/Examples/Tiny/noop',
# 'sc2' => '/Perinci/Examples/Tiny/odd_even'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: []
# Script's stdout: <--number
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - answer
1..2
ok 4 - completion of subcommand option
1..4
ok 16 - completion
# Subtest: env
ok 1 - dummy
# Subtest: env read
# Generated CLI script at /tmp/jR2g_jFJoI/cli_dCzOKiv
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cli_dCzOKiv',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 1,
# 'script_name' => 'sum-nums',
# 'url' => '/Perinci/Examples/Tiny/sum'
# }
# argv: [
# '3'
# ]
# Script's stdout: <6
# >
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - env read
# Subtest: default env name prefixed by _ if script name starts with number
# Generated CLI script at /tmp/jR2g_jFJoI/cliDvR_eQ3M
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliDvR_eQ3M',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 1,
# 'script_name' => '0sum-nums',
# 'url' => '/Perinci/Examples/Tiny/sum'
# }
# argv: [
# '3'
# ]
# Script's stdout: <6
# >
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - default env name prefixed by _ if script name starts with number
# Subtest: turned off via --no-env
# Generated CLI script at /tmp/jR2g_jFJoI/cliTBwITd6m
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/cliTBwITd6m',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 1,
# 'script_name' => 'sum-nums',
# 'url' => '/Perinci/Examples/Tiny/sum'
# }
# argv: [
# '--no-env',
# '3'
# ]
# Script's stdout: <3
# >
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - turned off via --no-env
# Subtest: attr:env_name
# Generated CLI script at /tmp/jR2g_jFJoI/clikL8GdBaV
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'env_name' => 'foo_opt',
# 'output_file' => '/tmp/jR2g_jFJoI/clikL8GdBaV',
# 'overwrite' => 1,
# 'read_config' => 0,
# 'read_env' => 1,
# 'script_name' => 'sum-nums',
# 'url' => '/Perinci/Examples/Tiny/sum'
# }
# argv: [
# '3'
# ]
# Script's stdout: <18
# >
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - attr:env_name
1..5
ok 17 - env
# Subtest: config file
ok 1 - dummy
# Subtest: attr:config_dirs
# Generated CLI script at /tmp/jR2g_jFJoI/cliBDnItS5W
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliBDnItS5W',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 2 - attr:config_dirs
# Subtest: attr:config_filename
# Generated CLI script at /tmp/jR2g_jFJoI/cli_CkT6ykQ
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'config_filename' => 'prog2.conf',
# 'output_file' => '/tmp/jR2g_jFJoI/cli_CkT6ykQ',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 3 - attr:config_filename
# Subtest: attr:config_filename (hash record)
# Generated CLI script at /tmp/jR2g_jFJoI/cliyCUv9957
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'config_filename' => [
# {
# 'filename' => 'prog4.conf',
# 'section' => 'prog'
# },
# 'prog2.conf'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliyCUv9957',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: []
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 4 - attr:config_filename (hash record)
# Subtest: attr:config_filename (hash record) + --config-profile
# Generated CLI script at /tmp/jR2g_jFJoI/cliKlx77nOO
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'config_filename' => [
# {
# 'filename' => 'prog4.conf',
# 'section' => 'prog'
# },
# 'prog2.conf'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliKlx77nOO',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: [
# '--config-profile',
# 'profile1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 5 - attr:config_filename (hash record) + --config-profile
# Subtest: common option: --no-config
# Generated CLI script at /tmp/jR2g_jFJoI/cliGWsdDMu3
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliGWsdDMu3',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: [
# '--no-config'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 6 - common option: --no-config
# Subtest: common option: --config-path
# Generated CLI script at /tmp/jR2g_jFJoI/clizTKJEbVr
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'output_file' => '/tmp/jR2g_jFJoI/clizTKJEbVr',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: [
# '--config-path',
# '/tmp/jR2g_jFJoI/prog.conf'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 7 - common option: --config-path
# Subtest: common option: --config-profile
# Generated CLI script at /tmp/jR2g_jFJoI/cliTxyGoRLP
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliTxyGoRLP',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: [
# '--config-profile=profile1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 8 - common option: --config-profile
# Subtest: unknown config profile -> error
# Generated CLI script at /tmp/jR2g_jFJoI/cliGlv9My_u
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliGlv9My_u',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: [
# '--config-profile=foo'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
1..1
ok 9 - unknown config profile -> error
# Subtest: unknown config profile but does not read config -> ok
# Generated CLI script at /tmp/jR2g_jFJoI/clilf35HbJE
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/clilf35HbJE',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'foo',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: [
# '--config-profile=bar'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 10 - unknown config profile but does not read config -> ok
# Subtest: subcommand
# Generated CLI script at /tmp/jR2g_jFJoI/cli3uakwd03
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cli3uakwd03',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'subcommands' => {
# 'subcommand1' => '/Perinci/Examples/Tiny/noop2'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# 'subcommand1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 11 - subcommand
# Subtest: subcommand + --config-profile
# Generated CLI script at /tmp/jR2g_jFJoI/cliCnz37Xx7
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliCnz37Xx7',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog',
# 'subcommands' => {
# 'subcommand1' => '/Perinci/Examples/Tiny/noop2'
# },
# 'url' => '/Perinci/Examples/Tiny/'
# }
# argv: [
# '--config-profile=profile1',
# 'subcommand1'
# ]
# Script's stdout:
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 12 - subcommand + --config-profile
# Subtest: array-ify if argument is array
# Generated CLI script at /tmp/jR2g_jFJoI/cliumMHefC4
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliumMHefC4',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'sum',
# 'url' => '/Perinci/Examples/Tiny/sum'
# }
# argv: []
# Script's stdout: <0
# >
# Script's stderr:
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 13 - array-ify if argument is array
# Subtest: can also set common option
# Generated CLI script at /tmp/jR2g_jFJoI/cliCY4LpGcz
# gen_pericmd_script args: {
# 'cmdline' => 'Perinci::CmdLine::Lite',
# 'config_dirs' => [
# '/tmp/jR2g_jFJoI'
# ],
# 'output_file' => '/tmp/jR2g_jFJoI/cliCY4LpGcz',
# 'overwrite' => 1,
# 'read_config' => 1,
# 'read_env' => 0,
# 'script_name' => 'prog3',
# 'url' => '/Perinci/Examples/Tiny/noop2'
# }
# argv: []
# Script's stdout: <"a=101\nb=\nc=\nd=\ne="
# >
# Script's stderr: <>
ok 1 - exit_code
ok 2 - stdout_like
1..2
ok 14 - can also set common option
1..14
ok 18 - config file
# all tests successful, deleting tempdir /tmp/jR2g_jFJoI
1..18
ok
All tests successful.
Files=4, Tests=20, 16 wallclock secs ( 0.18 usr 0.02 sys + 11.46 cusr 2.22 csys = 13.88 CPU)
Result: PASS
PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
make test TEST_VERBOSE=1 -- OK
perlancar <perlancar@gmail.com>A Rinci/Riap-based command-line application framework
>>> (cd /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp && tar cvf - Perinci-CmdLine-Lite-1.76.ppd blib) | gzip -c >/Users/fly2000/cpanfly-5.20/var/REPO/P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.76.tar.gz
Perinci-CmdLine-Lite-1.76.ppd
blib/
blib/lib/
blib/lib/auto/
blib/lib/auto/share/
blib/lib/auto/share/dist/
blib/lib/auto/share/dist/Perinci-CmdLine-Lite/
blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/
blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt
blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt
blib/lib/Perinci/
blib/lib/Perinci/CmdLine/
blib/lib/Perinci/CmdLine/Base.pm
blib/lib/Perinci/CmdLine/Lite.pm
blib/man3/
blib/man3/Perinci::CmdLine::Base.3
blib/man3/Perinci::CmdLine::Lite.3
PERLANCAR/App-depak-0.57.tar.gz
Has already been unwrapped into directory /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk
PERLANCAR/App-depak-0.57.tar.gz
Has already been prepared
Running make for P/PE/PERLANCAR/App-depak-0.57.tar.gz
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'make'
Warning: Prerequisite 'Module::FatPack => 0.16' for 'PERLANCAR/App-depak-0.57.tar.gz' failed when processing 'PERLANCAR/Module-FatPack-0.17.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'App::tracepm => 0.17' for 'PERLANCAR/App-depak-0.57.tar.gz' failed when processing 'PERLANCAR/App-tracepm-0.20.tar.gz' with 'make_test => NO one dependency not OK (CHI)'. Continuing, but chances to succeed are limited.
>>> make
cp lib/App/depak.pm blib/lib/App/depak.pm
cp lib/Perinci/CmdLine/depak.pm blib/lib/Perinci/CmdLine/depak.pm
cp script/depak blib/script/depak
"/Users/fly2000/ap2000-298465/bin/perl-dynamic" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/depak
Manifying 1 pod document
Manifying 2 pod documents
PERLANCAR/App-depak-0.57.tar.gz
make -- OK
Prepending /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'App/depak.pm loaded ok'
# at t/00-compile.t line 46.
# got: '512'
# expected: '0'
Can't locate App/tracepm.pm in @INC (you may need to install the App::tracepm module) (@INC contains: /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.76-TbSMZp/blib/lib /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/arch /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/Module-DataPack-0.21-BBeJyC/blib/lib /Users/fly2000/cpanfly-5.20/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .) at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk/blib/lib/App/depak.pm line 13.
BEGIN failed--compilation aborted at /Users/fly2000/cpanfly-5.20/var/tmp/cpan_build/App-depak-0.57-XXUhkk/blib/lib/App/depak.pm line 13.
Compilation failed in require at -e line 1.
# Looks like you failed 1 test of 3.
t/00-compile.t ...........
1..3
not ok 1 - App/depak.pm loaded ok
ok 2 - Perinci/CmdLine/depak.pm loaded ok
ok 3 - script/depak compiled ok
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/3 subtests
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/release-rinci.t ........ skipped: these tests are for release candidate testing
Test Summary Report
-------------------
t/00-compile.t (Wstat: 256 Tests: 3 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=4, Tests=3, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.15 cusr 0.05 csys = 0.25 CPU)
Result: FAIL
Failed 1/4 test programs. 1/3 subtests failed.
make: *** [test_dynamic] Error 255
PERLANCAR/App-depak-0.57.tar.gz
one dependency not OK (App::tracepm); additionally test harness failed
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports PERLANCAR/App-depak-0.57.tar.gz
Finished 2017-07-15T10:15:05