PATH=/usr/bin:/bin
Start 2014-11-30T10:00:28
ActivePerl-2000 CPAN-2.00
Reading '/Users/fly2000/var/cpan/Metadata'
Database was generated on Sun, 30 Nov 2014 17:17:02 GMT
Running make for T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
Checksum for /data/cpan/authors/id/T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz ok
Device-WebIO-RaspberryPi-0.007/
Device-WebIO-RaspberryPi-0.007/MANIFEST
Device-WebIO-RaspberryPi-0.007/README.md
Device-WebIO-RaspberryPi-0.007/lib/
Device-WebIO-RaspberryPi-0.007/lib/Device/
Device-WebIO-RaspberryPi-0.007/lib/Device/WebIO/
Device-WebIO-RaspberryPi-0.007/lib/Device/WebIO/RaspberryPi.pm
Device-WebIO-RaspberryPi-0.007/examples/
Device-WebIO-RaspberryPi-0.007/examples/switch_input.pl
Device-WebIO-RaspberryPi-0.007/examples/picture.pl
Device-WebIO-RaspberryPi-0.007/examples/blink.pl
Device-WebIO-RaspberryPi-0.007/examples/tmp102.pl
Device-WebIO-RaspberryPi-0.007/examples/video_stream.pl
Device-WebIO-RaspberryPi-0.007/META.json
Device-WebIO-RaspberryPi-0.007/TODO
Device-WebIO-RaspberryPi-0.007/CHANGELOG
Device-WebIO-RaspberryPi-0.007/Makefile.PL
Device-WebIO-RaspberryPi-0.007/dist.ini
Device-WebIO-RaspberryPi-0.007/t/
Device-WebIO-RaspberryPi-0.007/t/001_load.t
Device-WebIO-RaspberryPi-0.007/t/002_pod.t
CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Warning: prerequisite Device::WebIO 0.008 not found. We have 0.007.
Warning: prerequisite GStreamer1 0.002 not found.
Warning: prerequisite HiPi 0 not found.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Device::WebIO::RaspberryPi
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz ----
Device::WebIO [requires]
HiPi [requires]
GStreamer1 [requires]
Running make test
Delayed until after prerequisites
Running test for module 'Device::WebIO'
Running make for T/TM/TMURRAY/Device-WebIO-0.008.tar.gz
Checksum for /data/cpan/authors/id/T/TM/TMURRAY/Device-WebIO-0.008.tar.gz ok
Device-WebIO-0.008/
Device-WebIO-0.008/MANIFEST
Device-WebIO-0.008/lib/
Device-WebIO-0.008/lib/Device/
Device-WebIO-0.008/lib/Device/WebIO.pm
Device-WebIO-0.008/lib/Device/WebIO/
Device-WebIO-0.008/lib/Device/WebIO/Device.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/
Device-WebIO-0.008/lib/Device/WebIO/Device/PWM.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/VideoOutput.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/I2CUser.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/DigitalInputCallback.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/OneWire.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/Serial.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/I2CProvider.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/StillImageOutput.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/SPI.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/VideoOutputCallback.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/TempSensor.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/DigitalInput.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/DigitalOutput.pm
Device-WebIO-0.008/lib/Device/WebIO/Device/ADC.pm
Device-WebIO-0.008/lib/Device/WebIO/Exceptions.pm
Device-WebIO-0.008/examples/
Device-WebIO-0.008/examples/rpi_firmata_link_blink.pl
Device-WebIO-0.008/META.json
Device-WebIO-0.008/LICENSE
Device-WebIO-0.008/t_data/
Device-WebIO-0.008/t_data/test.jpg
Device-WebIO-0.008/t_data/wumpus_video_dump.h264
Device-WebIO-0.008/TODO
Device-WebIO-0.008/README
Device-WebIO-0.008/CHANGELOG
Device-WebIO-0.008/Makefile.PL
Device-WebIO-0.008/dist.ini
Device-WebIO-0.008/t/
Device-WebIO-0.008/t/030_adc_input.t
Device-WebIO-0.008/t/lib/
Device-WebIO-0.008/t/lib/MockVideoOutput.pm
Device-WebIO-0.008/t/lib/MockDigitalInputCallback.pm
Device-WebIO-0.008/t/lib/MockADCInput.pm
Device-WebIO-0.008/t/lib/MockPWMOutput.pm
Device-WebIO-0.008/t/lib/MockDigitalInput.pm
Device-WebIO-0.008/t/lib/MockTempSensor.pm
Device-WebIO-0.008/t/lib/MockDigitalInputOutput.pm
Device-WebIO-0.008/t/lib/MockDigitalOutput.pm
Device-WebIO-0.008/t/lib/MockVideoOutputCallback.pm
Device-WebIO-0.008/t/lib/MockStillImageOutput.pm
Device-WebIO-0.008/t/lib/MockI2CUser.pm
Device-WebIO-0.008/t/lib/MockI2CProvider.pm
Device-WebIO-0.008/t/100_temp_sensors.t
Device-WebIO-0.008/t/080_still_image_output.t
Device-WebIO-0.008/t/040_pwm_output.t
Device-WebIO-0.008/t/010_digital_input.t
Device-WebIO-0.008/t/110_digital_input_callback.t
Device-WebIO-0.008/t/060_video_output.t
Device-WebIO-0.008/t/001_load.t
Device-WebIO-0.008/t/090_i2c.t
Device-WebIO-0.008/t/200_two_types_one_obj.t
Device-WebIO-0.008/t/120_video_output_callback.t
Device-WebIO-0.008/t/070_description.t
Device-WebIO-0.008/t/020_digital_output.t
Device-WebIO-0.008/t/002_pod.t
CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-0.008.tar.gz
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Device::WebIO
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Device/WebIO/Device/StillImageOutput.pm blib/lib/Device/WebIO/Device/StillImageOutput.pm
cp lib/Device/WebIO/Device/VideoOutputCallback.pm blib/lib/Device/WebIO/Device/VideoOutputCallback.pm
cp lib/Device/WebIO/Device/DigitalInputCallback.pm blib/lib/Device/WebIO/Device/DigitalInputCallback.pm
cp lib/Device/WebIO/Exceptions.pm blib/lib/Device/WebIO/Exceptions.pm
cp lib/Device/WebIO/Device/VideoOutput.pm blib/lib/Device/WebIO/Device/VideoOutput.pm
cp lib/Device/WebIO/Device.pm blib/lib/Device/WebIO/Device.pm
cp lib/Device/WebIO/Device/I2CUser.pm blib/lib/Device/WebIO/Device/I2CUser.pm
cp lib/Device/WebIO/Device/PWM.pm blib/lib/Device/WebIO/Device/PWM.pm
cp lib/Device/WebIO/Device/I2CProvider.pm blib/lib/Device/WebIO/Device/I2CProvider.pm
cp lib/Device/WebIO/Device/ADC.pm blib/lib/Device/WebIO/Device/ADC.pm
cp lib/Device/WebIO/Device/DigitalOutput.pm blib/lib/Device/WebIO/Device/DigitalOutput.pm
cp lib/Device/WebIO/Device/DigitalInput.pm blib/lib/Device/WebIO/Device/DigitalInput.pm
cp lib/Device/WebIO/Device/TempSensor.pm blib/lib/Device/WebIO/Device/TempSensor.pm
cp lib/Device/WebIO/Device/SPI.pm blib/lib/Device/WebIO/Device/SPI.pm
cp lib/Device/WebIO.pm blib/lib/Device/WebIO.pm
cp lib/Device/WebIO/Device/OneWire.pm blib/lib/Device/WebIO/Device/OneWire.pm
cp lib/Device/WebIO/Device/Serial.pm blib/lib/Device/WebIO/Device/Serial.pm
Manifying 12 pod documents
TMURRAY/Device-WebIO-0.008.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/001_load.t ....................
1..14
ok 1 - use Device::WebIO::Exceptions;
ok 2 - use Device::WebIO;
ok 3 - use Device::WebIO::Device;
ok 4 - use Device::WebIO::Device::DigitalInput;
ok 5 - use Device::WebIO::Device::DigitalOutput;
ok 6 - use Device::WebIO::Device::DigitalInputCallback;
ok 7 - use Device::WebIO::Device::ADC;
ok 8 - use Device::WebIO::Device::PWM;
ok 9 - use Device::WebIO::Device::SPI;
ok 10 - use Device::WebIO::Device::I2CProvider;
ok 11 - use Device::WebIO::Device::I2CUser;
ok 12 - use Device::WebIO::Device::Serial;
ok 13 - use Device::WebIO::Device::OneWire;
ok 14 - use Device::WebIO::Device::VideoOutput;
ok
t/002_pod.t .....................
1..17
ok 1 - POD test for lib/Device/WebIO.pm
ok 2 - POD test for lib/Device/WebIO/Device.pm
ok 3 - POD test for lib/Device/WebIO/Exceptions.pm (no pod)
ok 4 - POD test for lib/Device/WebIO/Device/ADC.pm
ok 5 - POD test for lib/Device/WebIO/Device/DigitalInput.pm
ok 6 - POD test for lib/Device/WebIO/Device/DigitalInputCallback.pm
ok 7 - POD test for lib/Device/WebIO/Device/DigitalOutput.pm
ok 8 - POD test for lib/Device/WebIO/Device/I2CProvider.pm
ok 9 - POD test for lib/Device/WebIO/Device/I2CUser.pm
ok 10 - POD test for lib/Device/WebIO/Device/OneWire.pm (no pod)
ok 11 - POD test for lib/Device/WebIO/Device/PWM.pm (no pod)
ok 12 - POD test for lib/Device/WebIO/Device/Serial.pm (no pod)
ok 13 - POD test for lib/Device/WebIO/Device/SPI.pm (no pod)
ok 14 - POD test for lib/Device/WebIO/Device/StillImageOutput.pm
ok 15 - POD test for lib/Device/WebIO/Device/TempSensor.pm
ok 16 - POD test for lib/Device/WebIO/Device/VideoOutput.pm
ok 17 - POD test for lib/Device/WebIO/Device/VideoOutputCallback.pm
ok
t/010_digital_input.t ...........
1..12
ok 1 - Does Device role
ok 2 - Does DigitalInput role
ok 3 - Pin 0 set as input
ok 4 - Pin 1 set as input
ok 5 - Pin 2 not set as input
ok 6 - Input 0 on pin 0
ok 7 - Input 1 on pin 1
ok 8 - Fetch pin count
ok 9 - Read whole port
ok 10 - Caught exception for using too high a pin for set_as_input()
ok 11 - Caught exception for using too high a pin for digital_input()
ok 12 - Caught exception for using an output function on an input-only object
ok
t/020_digital_output.t ..........
1..13
ok 1 - Does Device role
ok 2 - Does DigitalOutput role
ok 3 - Pin 0 set as output
ok 4 - Pin 1 set as output
ok 5 - Pin 2 not set as output
ok 6 - Output 0 on pin 0
ok 7 - Output 1 on pin 1
ok 8 - Fetch pin count
ok 9 - Port write pin 0
ok 10 - Port write pin 5
ok 11 - Caught exception for using too high a pin on set_as_output()
ok 12 - Caught exception for using too high a pin on digital_output()
ok 13 - Caught exception for using an input function on an output-only object
ok
t/030_adc_input.t ...............
1..20
ok 1 - Does Device role
ok 2 - Does ADC role
ok 3 - Pin count
ok 4 - Bit resolution pin 0
ok 5 - Max int pin 0
ok 6 - Volt reference pin 0
ok 7 - Bit resolution pin 2
ok 8 - Max int pin 2
ok 9 - Volt reference pin 2
ok 10 - ADC pin 0 set
ok 11 - ADC pin 1 set
ok 12 - ADC pin 2 set
ok 13 - ADC pin 0 float
ok 14 - ADC pin 2 float
ok 15 - ADC pin 0 volts
ok 16 - ADC pin 2 volts
ok 17 - Caught exception for using too high a pin for adc_input_int()
ok 18 - Caught exception for using too high a pin for adc_input_float()
ok 19 - Caught exception for using too high a pin for adc_input_volts()
ok 20 - Caught exception for using a digital output function on an adc-only object
ok
t/040_pwm_output.t ..............
1..13
ok 1 - Does Device role
ok 2 - Does PWM role
ok 3 - Pin count
ok 4 - Bit resolution pin 0
ok 5 - Max int pin 0
ok 6 - Bit resolution pin 0
ok 7 - Max int pin 0
ok 8 - PWM pin 0 set
ok 9 - PWM pin 1 set
ok 10 - PWM pin 2 set
ok 11 - Caught exception for using too high a pin for pwm_output_int()
ok 12 - Caught exception for using too high a pin for pwm_output_float()
ok 13 - Caught exception for using a digital output function on a pwm-only object
ok
Smartmatch is experimental at t/060_video_output.t line 60.
t/060_video_output.t ............
1..13
ok 1 - Does Device role
ok 2 - Does VideoOutput role
ok 3 - Channel count
ok 4 - Width
ok 5 - Height
ok 6 - FPS
ok 7 - Kbps
ok 8 - Width
ok 9 - Height
ok 10 - FPS
ok 11 - Kbps
ok 12 - Content-type video/h264 is allowed
ok 13 - Got video stream
ok
t/070_description.t .............
1..3
ok 1
ok 2
ok 3
ok
Smartmatch is experimental at t/080_still_image_output.t line 51.
t/080_still_image_output.t ......
1..9
ok 1 - Channel count
ok 2 - Width
ok 3 - Height
ok 4 - Quality
ok 5 - Width
ok 6 - Height
ok 7 - Quality
ok 8 - Content-type image/jpeg is allowed
ok 9 - Got video stream
ok
t/090_i2c.t .....................
1..2
ok 1 - Set/get first register
ok 2 - Set/get second register
ok
t/100_temp_sensors.t ............
1..6
ok 1 - Got temp in celsius
ok 2 - Got temp in kelvins
ok 3 - Got temp in fahrenheit
ok 4 - Got temp in celsius
ok 5 - Got temp in kelvins
ok 6 - Got temp in fahrenheit
ok
t/110_digital_input_callback.t ..
1..16
ok 1 - Does Device role
ok 2 - Does DigitalInputCallback role
ok 3 - Pin 0 set as input
ok 4 - Pin 1 set as input
ok 5 - Pin 2 set as input
ok 6 - Pin 3 set as input
ok 7 - Fetch pin count
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16 - Began loop
ok
t/120_video_output_callback.t ...
1..5
ok 1 - Does Device role
ok 2 - Does VideoOutput role
ok 3 - Does VideoOutputCallback role
ok 4 - Called callback
ok 5 - Begin loop
ok
t/200_two_types_one_obj.t .......
1..12
ok 1 - Does DigitalInput role
ok 2 - Does DigitalOutput role
ok 3 - Input pin count
ok 4 - Output pin count
ok 5 - Pin 0 set as input
ok 6 - Pin 1 set as output
ok 7 - Input 1 on pin 0
ok 8 - Output 1 on pin 1
ok 9 - Read whole port
ok 10 - Port write pin 0
ok 11 - Port write pin 5
ok 12 - Caught exception for using too high a pin on set_as_output()
ok
All tests successful.
Files=14, Tests=155, 4 wallclock secs ( 0.10 usr 0.05 sys + 1.57 cusr 0.25 csys = 1.97 CPU)
Result: PASS
TMURRAY/Device-WebIO-0.008.tar.gz
make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
Timm Murray <tmurray@wumpus-cave.net>
Duct Tape for the Internet of Things
>>> (cd /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn && tar cvf - Device-WebIO-0.008.ppd blib) | gzip -c >/Users/fly2000/var/REPO/T/TM/TMURRAY/Device-WebIO-0.008.tar.gz
Device-WebIO-0.008.ppd
blib/
blib/lib/
blib/lib/Device/
blib/lib/Device/WebIO/
blib/lib/Device/WebIO/Device/
blib/lib/Device/WebIO/Device/ADC.pm
blib/lib/Device/WebIO/Device/DigitalInput.pm
blib/lib/Device/WebIO/Device/DigitalInputCallback.pm
blib/lib/Device/WebIO/Device/DigitalOutput.pm
blib/lib/Device/WebIO/Device/I2CProvider.pm
blib/lib/Device/WebIO/Device/I2CUser.pm
blib/lib/Device/WebIO/Device/OneWire.pm
blib/lib/Device/WebIO/Device/PWM.pm
blib/lib/Device/WebIO/Device/Serial.pm
blib/lib/Device/WebIO/Device/SPI.pm
blib/lib/Device/WebIO/Device/StillImageOutput.pm
blib/lib/Device/WebIO/Device/TempSensor.pm
blib/lib/Device/WebIO/Device/VideoOutput.pm
blib/lib/Device/WebIO/Device/VideoOutputCallback.pm
blib/lib/Device/WebIO/Device.pm
blib/lib/Device/WebIO/Exceptions.pm
blib/lib/Device/WebIO.pm
blib/man3/
blib/man3/Device::WebIO.3
blib/man3/Device::WebIO::Device.3
blib/man3/Device::WebIO::Device::ADC.3
blib/man3/Device::WebIO::Device::DigitalInput.3
blib/man3/Device::WebIO::Device::DigitalInputCallback.3
blib/man3/Device::WebIO::Device::DigitalOutput.3
blib/man3/Device::WebIO::Device::I2CProvider.3
blib/man3/Device::WebIO::Device::I2CUser.3
blib/man3/Device::WebIO::Device::StillImageOutput.3
blib/man3/Device::WebIO::Device::TempSensor.3
blib/man3/Device::WebIO::Device::VideoOutput.3
blib/man3/Device::WebIO::Device::VideoOutputCallback.3
>>> mv /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/Device-WebIO-0.008.ppd /Users/fly2000/var/REPO/T/TM/TMURRAY
Running test for module 'HiPi'
Running make for M/MD/MDOOTSON/HiPi-0.33.tar.gz
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'get'
Checksum for /data/cpan/authors/id/M/MD/MDOOTSON/HiPi-0.33.tar.gz ok
HiPi-0.33
HiPi-0.33/MANIFEST
HiPi-0.33/Wiring.xs
HiPi-0.33/BCM2835.xs
HiPi-0.33/META.yml
HiPi-0.33/README
HiPi-0.33/typemap
HiPi-0.33/Utils.xs
HiPi-0.33/Exec.xs
HiPi-0.33/Changes
HiPi-0.33/COPYING
HiPi-0.33/Build.PL
HiPi-0.33/INSTALL
HiPi-0.33/SPI.xs
HiPi-0.33/I2C.xs
HiPi-0.33/META.json
HiPi-0.33/inc
HiPi-0.33/inc/buildexecs.pl
HiPi-0.33/inc/installwx.pl
HiPi-0.33/inc/Module
HiPi-0.33/inc/Module/Build
HiPi-0.33/inc/Module/Build/HiPi.pm
HiPi-0.33/mylib
HiPi-0.33/mylib/include
HiPi-0.33/mylib/include/ppport.h
HiPi-0.33/mylib/include/local-i2c-dev.h
HiPi-0.33/mylib/auto
HiPi-0.33/mylib/auto/share
HiPi-0.33/mylib/auto/share/dist
HiPi-0.33/mylib/auto/share/dist/HiPi
HiPi-0.33/mylib/auto/share/dist/HiPi/help
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_example_derived.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_example_mixed.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/overview.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_w1dev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/command_line_utils_i2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_hipi_interrupt_handler.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_gpio.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/wiringpipatch.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_base.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controli2cdev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/back.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_spidev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mpl3115a2.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control-app.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_onewire.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/command_line_utils.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp23017.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_lang.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/release_notes.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_wiring.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipicontrol.hhp
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_hipi_interrupt_message.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_overview.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlinfo.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_raspberrypi.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_gpiopins.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp3008.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_info.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/contents.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_hipi_interrupt.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_htbackpackv2.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_gpiodev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_constant.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_gpio_device.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/helpp5.JPG
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlw1dev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_gpio_1.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/forward.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_gpio_5.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_hd44780.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipi-bcm2835-pin.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/nanoblacklist.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlgpio1.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/interrupt_example_callback.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/modelap5.JPG
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipi-device-gpio-pin.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlgpiodev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_htadci2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_spi.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_i2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipicontrol.hhc
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_gpio.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_w1dev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/nanomodules.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlspidev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipicontrol.hhk
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_i2cdev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_ds18x20.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/installation.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/home.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/license.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_serlcd.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_load_drivers_startup.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/pin_modules_bcm2835.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio_bcm2835_i2c.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp49xx.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/hipi-pin.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/controlgpio5.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_interface_mcp3004.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_gpiopins_rev1.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/topic_i2cbus_2.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_serialport.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio_wiring.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_gpio_bcm2835.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_device_spi.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_class.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/control_app_i2cdev.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/up.png
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/command_line_utils_pud.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/help/en/mod_util_utils.htm
HiPi-0.33/mylib/auto/share/dist/HiPi/image
HiPi-0.33/mylib/auto/share/dist/HiPi/image/w1.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi24.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/spidev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi48.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi64.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/gpio1.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi16.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi256.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/mc32.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi128.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/mc16.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/hipi32.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/i2cdev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/gpiodev.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/rasp16.png
HiPi-0.33/mylib/auto/share/dist/HiPi/image/gpio5.png
HiPi-0.33/lib
HiPi-0.33/lib/HiPi.pm
HiPi-0.33/lib/HiPi
HiPi-0.33/lib/HiPi/Utils.pm
HiPi-0.33/lib/HiPi/Pin.pm
HiPi-0.33/lib/HiPi/Device.pm
HiPi-0.33/lib/HiPi/Interrupt.pm
HiPi-0.33/lib/HiPi/Interface.pm
HiPi-0.33/lib/HiPi/Wiring.pm
HiPi-0.33/lib/HiPi/Constant.pm
HiPi-0.33/lib/HiPi/Class.pm
HiPi-0.33/lib/HiPi/Language.pm
HiPi-0.33/lib/HiPi/RaspberryPi.pm
HiPi-0.33/lib/HiPi/BCM2835.pm
HiPi-0.33/lib/HiPi/Wx
HiPi-0.33/lib/HiPi/Wx/ValidatedText.pm
HiPi-0.33/lib/HiPi/Wx/Menu.pm
HiPi-0.33/lib/HiPi/Wx/Validator.pm
HiPi-0.33/lib/HiPi/Wx/Panel.pm
HiPi-0.33/lib/HiPi/Wx/LogGui.pm
HiPi-0.33/lib/HiPi/Wx/TopLevelWindow.pm
HiPi-0.33/lib/HiPi/Wx/Dialog.pm
HiPi-0.33/lib/HiPi/Wx/Common.pm
HiPi-0.33/lib/HiPi/Wx/ValidatedCheckBox.pm
HiPi-0.33/lib/HiPi/Wx/Frame.pm
HiPi-0.33/lib/HiPi/Wx/App.pm
HiPi-0.33/lib/HiPi/Wx/Validator
HiPi-0.33/lib/HiPi/Wx/Validator/SetValue.pm
HiPi-0.33/lib/HiPi/Wx/Validator/Data.pm
HiPi-0.33/lib/HiPi/Wx/Validator/PassThrough.pm
HiPi-0.33/lib/HiPi/Wx/Validator/BoolEnable.pm
HiPi-0.33/lib/HiPi/Wx/LogGui
HiPi-0.33/lib/HiPi/Wx/LogGui/LogWindowGrid.pm
HiPi-0.33/lib/HiPi/Wx/LogGui/LogWindowListCtrl.pm
HiPi-0.33/lib/HiPi/BCM2835
HiPi-0.33/lib/HiPi/BCM2835/Pin.pm
HiPi-0.33/lib/HiPi/BCM2835/I2C.pm
HiPi-0.33/lib/HiPi/Apps
HiPi-0.33/lib/HiPi/Apps/Control.pm
HiPi-0.33/lib/HiPi/Apps/Control
HiPi-0.33/lib/HiPi/Apps/Control/SelectPanel.pm
HiPi-0.33/lib/HiPi/Apps/Control/GroupDialog.pm
HiPi-0.33/lib/HiPi/Apps/Control/MainWindow.pm
HiPi-0.33/lib/HiPi/Apps/Control/MainPanel.pm
HiPi-0.33/lib/HiPi/Apps/Control/Constant.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel
HiPi-0.33/lib/HiPi/Apps/Control/Panel/Base.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/GPIO1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/SPI.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/Device.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/I2C.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/GPIODEV.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/Pad.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/RInfo.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/GPIO5.pm
HiPi-0.33/lib/HiPi/Apps/Control/Panel/W1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Command
HiPi-0.33/lib/HiPi/Apps/Control/Command/GPIO.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data
HiPi-0.33/lib/HiPi/Apps/Control/Data/GPIOPAD1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceSPI.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/GPIOPAD5.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceW1.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/Utils.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceGPIO.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/Pad.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/RInfo.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/DeviceI2C.pm
HiPi-0.33/lib/HiPi/Apps/Control/Data/PadPin.pm
HiPi-0.33/lib/HiPi/Apps/Control/Menu
HiPi-0.33/lib/HiPi/Apps/Control/Menu/File.pm
HiPi-0.33/lib/HiPi/Apps/Control/Menu/Help.pm
HiPi-0.33/lib/HiPi/Device
HiPi-0.33/lib/HiPi/Device/SPI.pm
HiPi-0.33/lib/HiPi/Device/I2C.pm
HiPi-0.33/lib/HiPi/Device/GPIO.pm
HiPi-0.33/lib/HiPi/Device/OneWire.pm
HiPi-0.33/lib/HiPi/Device/SerialPort.pm
HiPi-0.33/lib/HiPi/Device/GPIO
HiPi-0.33/lib/HiPi/Device/GPIO/Pin.pm
HiPi-0.33/lib/HiPi/Utils
HiPi-0.33/lib/HiPi/Utils/Exec.pm
HiPi-0.33/lib/HiPi/Interrupt
HiPi-0.33/lib/HiPi/Interrupt/Handler.pm
HiPi-0.33/lib/HiPi/Interrupt/Base.pm
HiPi-0.33/lib/HiPi/Interrupt/Message.pm
HiPi-0.33/lib/HiPi/Interrupt/GPIO.pm
HiPi-0.33/lib/HiPi/Interrupt/Wiring.pm
HiPi-0.33/lib/HiPi/Interrupt/BCM2835.pm
HiPi-0.33/lib/HiPi/Interface
HiPi-0.33/lib/HiPi/Interface/SerLCD.pm
HiPi-0.33/lib/HiPi/Interface/HTBackpackV2.pm
HiPi-0.33/lib/HiPi/Interface/MCP3008.pm
HiPi-0.33/lib/HiPi/Interface/HD44780.pm
HiPi-0.33/lib/HiPi/Interface/MCP49XX.pm
HiPi-0.33/lib/HiPi/Interface/DS18X20.pm
HiPi-0.33/lib/HiPi/Interface/MCP23017.pm
HiPi-0.33/lib/HiPi/Interface/MCP3004.pm
HiPi-0.33/lib/HiPi/Interface/MPL3115A2.pm
HiPi-0.33/lib/HiPi/Interface/HTADCI2C.pm
HiPi-0.33/lib/HiPi/Interface/GPS
HiPi-0.33/lib/HiPi/Interface/GPS/SRF.pm
HiPi-0.33/lib/HiPi/Interface/GPS/NMEA.pm
HiPi-0.33/lib/HiPi/Dummy
HiPi-0.33/lib/HiPi/Dummy/BCM2835.pm
HiPi-0.33/lib/HiPi/Wiring
HiPi-0.33/lib/HiPi/Wiring/Pin.pm
HiPi-0.33/lib/HiPi/Constant
HiPi-0.33/lib/HiPi/Constant/BoardRev1.pm
HiPi-0.33/lib/HiPi/Constant/BoardRev2.pm
HiPi-0.33/BCM2835
HiPi-0.33/BCM2835/src
HiPi-0.33/BCM2835/src/config.guess
HiPi-0.33/BCM2835/src/NEWS
HiPi-0.33/BCM2835/src/README
HiPi-0.33/BCM2835/src/configure
HiPi-0.33/BCM2835/src/missing
HiPi-0.33/BCM2835/src/Makefile.am
HiPi-0.33/BCM2835/src/COPYING
HiPi-0.33/BCM2835/src/config.h.in
HiPi-0.33/BCM2835/src/ltmain.sh
HiPi-0.33/BCM2835/src/INSTALL
HiPi-0.33/BCM2835/src/Makefile.in
HiPi-0.33/BCM2835/src/AUTHORS
HiPi-0.33/BCM2835/src/configure.in
HiPi-0.33/BCM2835/src/config.sub
HiPi-0.33/BCM2835/src/depcomp
HiPi-0.33/BCM2835/src/install-sh
HiPi-0.33/BCM2835/src/aclocal.m4
HiPi-0.33/BCM2835/src/ChangeLog
HiPi-0.33/BCM2835/src/doc
HiPi-0.33/BCM2835/src/doc/Makefile.am
HiPi-0.33/BCM2835/src/doc/Doxyfile.in
HiPi-0.33/BCM2835/src/doc/Makefile.in
HiPi-0.33/BCM2835/src/examples
HiPi-0.33/BCM2835/src/examples/spi
HiPi-0.33/BCM2835/src/examples/spi/spi.c
HiPi-0.33/BCM2835/src/examples/input
HiPi-0.33/BCM2835/src/examples/input/input.c
HiPi-0.33/BCM2835/src/examples/event
HiPi-0.33/BCM2835/src/examples/event/event.c
HiPi-0.33/BCM2835/src/examples/blink
HiPi-0.33/BCM2835/src/examples/blink/blink.c
HiPi-0.33/BCM2835/src/examples/spin
HiPi-0.33/BCM2835/src/examples/spin/spin.c
HiPi-0.33/BCM2835/src/src
HiPi-0.33/BCM2835/src/src/Makefile.am
HiPi-0.33/BCM2835/src/src/bcm2835.c
HiPi-0.33/BCM2835/src/src/Makefile.in
HiPi-0.33/BCM2835/src/src/test.c
HiPi-0.33/BCM2835/src/src/bcm2835.h
HiPi-0.33/userbin
HiPi-0.33/userbin/hipi-gpio
HiPi-0.33/userbin/hipi-expin
HiPi-0.33/userbin/hipi-install
HiPi-0.33/userbin/hipi-upgrade
HiPi-0.33/userbin/hipi-control-gui
HiPi-0.33/t
HiPi-0.33/t/015-device.t
HiPi-0.33/t/045-dev_gpio.t
HiPi-0.33/t/030-dev1wire.t
HiPi-0.33/t/045-devgpio.t
HiPi-0.33/t/060-i2c-all.t
HiPi-0.33/t/005-basic.t
HiPi-0.33/t/000-load.t
HiPi-0.33/t/061-mpl3115a2.t
HiPi-0.33/t/040-devi2c.t
HiPi-0.33/t/010-perms.t
HiPi-0.33/t/055-bcm2835.t
HiPi-0.33/t/035-devspi.t
HiPi-0.33/t/020-devmem.t
HiPi-0.33/t/050-wiring.t
HiPi-0.33/t/025-devserial.t
HiPi-0.33/Wiring
HiPi-0.33/Wiring/wiring.patch
HiPi-0.33/Wiring/src
HiPi-0.33/Wiring/src/wiringPi
HiPi-0.33/Wiring/src/wiringPi/piHiPri.c
HiPi-0.33/Wiring/src/wiringPi/piNes.h
HiPi-0.33/Wiring/src/wiringPi/wiringPi.h
HiPi-0.33/Wiring/src/wiringPi/wiringSerial.c
HiPi-0.33/Wiring/src/wiringPi/README
HiPi-0.33/Wiring/src/wiringPi/softServo.c
HiPi-0.33/Wiring/src/wiringPi/softServo.h
HiPi-0.33/Wiring/src/wiringPi/Makefile
HiPi-0.33/Wiring/src/wiringPi/wiringPiSPI.h
HiPi-0.33/Wiring/src/wiringPi/softTone.c
HiPi-0.33/Wiring/src/wiringPi/gertboard.c
HiPi-0.33/Wiring/src/wiringPi/softTone.h
HiPi-0.33/Wiring/src/wiringPi/lcd.h
HiPi-0.33/Wiring/src/wiringPi/wiringPiI2C.c
HiPi-0.33/Wiring/src/wiringPi/wiringSerial.h
HiPi-0.33/Wiring/src/wiringPi/wiringShift.c
HiPi-0.33/Wiring/src/wiringPi/wiringPiSPI.c
HiPi-0.33/Wiring/src/wiringPi/lcd.c
HiPi-0.33/Wiring/src/wiringPi/piNes.c
HiPi-0.33/Wiring/src/wiringPi/wiringPiFace.c
HiPi-0.33/Wiring/src/wiringPi/wiringShift.h
HiPi-0.33/Wiring/src/wiringPi/softPwm.c
HiPi-0.33/Wiring/src/wiringPi/piThread.c
HiPi-0.33/Wiring/src/wiringPi/COPYING.LESSER
HiPi-0.33/Wiring/src/wiringPi/wiringPiI2C.h
HiPi-0.33/Wiring/src/wiringPi/softPwm.h
HiPi-0.33/Wiring/src/wiringPi/wiringPi.c
HiPi-0.33/Wiring/src/wiringPi/gertboard.h
HiPi-0.33/suidbin
HiPi-0.33/suidbin/hipi-i2c.pl
HiPi-0.33/suidbin/hipi-pud.pl
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building M/MD/MDOOTSON/HiPi-0.33.tar.gz
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Build.PL
Checking prerequisites...
requires:
! IO::Epoll is not installed
! OpenGL is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'HiPi' version '0.33'
---- Unsatisfied dependencies detected during ----
---- MDOOTSON/HiPi-0.33.tar.gz ----
IO::Epoll [requires]
OpenGL [requires]
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'test'
Running Build test
Delayed until after prerequisites
Running test for module 'IO::Epoll'
Running make for B/BR/BRUCEK/IO-Epoll-0.03.tar.gz
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'get'
Checksum for /data/cpan/authors/id/B/BR/BRUCEK/IO-Epoll-0.03.tar.gz ok
IO-Epoll-0.03/
IO-Epoll-0.03/ppport.h
IO-Epoll-0.03/Changes
IO-Epoll-0.03/lib/
IO-Epoll-0.03/lib/IO/
IO-Epoll-0.03/lib/IO/Epoll.pm
IO-Epoll-0.03/t/
IO-Epoll-0.03/t/IO-Ppoll-compat.t
IO-Epoll-0.03/t/IO-Poll-compat.t
IO-Epoll-0.03/t/IO-Epoll.t
IO-Epoll-0.03/README
IO-Epoll-0.03/Makefile.PL
IO-Epoll-0.03/MANIFEST
IO-Epoll-0.03/META.yml
IO-Epoll-0.03/fallback/
IO-Epoll-0.03/fallback/const-c.inc
IO-Epoll-0.03/fallback/const-xs.inc
IO-Epoll-0.03/Epoll.xs
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building B/BR/BRUCEK/IO-Epoll-0.03.tar.gz
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for IO::Epoll
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/IO/Epoll.pm blib/lib/IO/Epoll.pm
AutoSplitting blib/lib/IO/Epoll.pm (blib/lib/auto/IO/Epoll)
Running Mkbootstrap for IO::Epoll ()
chmod 644 "Epoll.bs"
"/Users/fly2000/ap2000-298465/bin/perl-dynamic" "/Users/fly2000/var/megalib/ExtUtils/xsubpp" -typemap "/Users/fly2000/ap2000-298465/lib/ExtUtils/typemap" Epoll.xs > Epoll.xsc && mv Epoll.xsc Epoll.c
Please specify prototyping behavior for Epoll.xs (see perlxs manual)
gcc -c -I. -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-merge-constants -fno-strict-aliasing -pipe -fstack-protector -O3 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" "-I/Users/fly2000/ap2000-298465/lib/CORE" Epoll.c
In file included from Epoll.xs:5:
ppport.h:231:1: warning: "PERL_UNUSED_DECL" redefined
In file included from Epoll.xs:2:
/Users/fly2000/ap2000-298465/lib/CORE/perl.h:302:1: warning: this is the location of the previous definition
Epoll.xs:7:23: error: sys/epoll.h: No such file or directory
Epoll.xs: In function 'XS_IO__Epoll_epoll_ctl':
Epoll.xs:26: error: storage size of 'event' isn't known
Epoll.xs: In function 'XS_IO__Epoll_epoll_wait':
Epoll.xs:44: error: invalid application of 'sizeof' to incomplete type 'struct epoll_event'
Epoll.xs:57: error: invalid use of undefined type 'struct epoll_event'
Epoll.xs:57: error: dereferencing pointer to incomplete type
Epoll.xs:58: error: invalid use of undefined type 'struct epoll_event'
Epoll.xs:58: error: dereferencing pointer to incomplete type
Epoll.xs: In function 'XS_IO__Epoll_epoll_pwait':
Epoll.xs:93: error: invalid application of 'sizeof' to incomplete type 'struct epoll_event'
Epoll.xs:106: error: invalid use of undefined type 'struct epoll_event'
Epoll.xs:106: error: dereferencing pointer to incomplete type
Epoll.xs:107: error: invalid use of undefined type 'struct epoll_event'
Epoll.xs:107: error: dereferencing pointer to incomplete type
make: *** [Epoll.o] Error 1
BRUCEK/IO-Epoll-0.03.tar.gz
make -- NOT OK
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'test'
Running make test
Can't test without successful make
Running test for module 'OpenGL'
Running make for C/CH/CHM/OpenGL-0.6703.tar.gz
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'get'
Checksum for /data/cpan/authors/id/C/CH/CHM/OpenGL-0.6703.tar.gz ok
OpenGL-0.6703/
OpenGL-0.6703/Array.pod
OpenGL-0.6703/CHANGES
OpenGL-0.6703/COPYRIGHT
OpenGL-0.6703/examples/
OpenGL-0.6703/examples/clip.pl
OpenGL-0.6703/examples/cube.pl
OpenGL-0.6703/examples/depth.pl
OpenGL-0.6703/examples/double.pl
OpenGL-0.6703/examples/fun.pl
OpenGL-0.6703/examples/glu_test.pl
OpenGL-0.6703/examples/glxgears.pl
OpenGL-0.6703/examples/light.pl
OpenGL-0.6703/examples/plane.pl
OpenGL-0.6703/examples/planets.pl
OpenGL-0.6703/examples/quest.pl
OpenGL-0.6703/examples/README
OpenGL-0.6703/examples/simple.pl
OpenGL-0.6703/examples/smooth.pl
OpenGL-0.6703/examples/spaceship.nff
OpenGL-0.6703/examples/stan.ppm
OpenGL-0.6703/examples/tessellation.pl
OpenGL-0.6703/examples/texhack.pl
OpenGL-0.6703/examples/texture.pl
OpenGL-0.6703/examples/tk_demo.pl
OpenGL-0.6703/examples/tk_steal.pl
OpenGL-0.6703/examples/try.pl
OpenGL-0.6703/examples/with-glut.txt
OpenGL-0.6703/examples/with-glx.txt
OpenGL-0.6703/examples/wolf.bin
OpenGL-0.6703/fragment.arb
OpenGL-0.6703/fragment.cg
OpenGL-0.6703/fragment.glsl
OpenGL-0.6703/frank-vbo.pl
OpenGL-0.6703/FreeGLUT/
OpenGL-0.6703/FreeGLUT/freeglut.dll
OpenGL-0.6703/FreeGLUT/freeglut.lib
OpenGL-0.6703/FreeGLUT/README.txt
OpenGL-0.6703/funlist.c
OpenGL-0.6703/genvars.pl
OpenGL-0.6703/glext_procs.h
OpenGL-0.6703/glut_const.h
OpenGL-0.6703/glut_util.h
OpenGL-0.6703/glu_const.h
OpenGL-0.6703/glu_util.h
OpenGL-0.6703/glx_const.h
OpenGL-0.6703/glx_util.h
OpenGL-0.6703/gl_const.h
OpenGL-0.6703/gl_util.c
OpenGL-0.6703/gl_util.h
OpenGL-0.6703/hang.pl
OpenGL-0.6703/include/
OpenGL-0.6703/include/GL/
OpenGL-0.6703/include/GL/freeglut.h
OpenGL-0.6703/include/GL/freeglut_ext.h
OpenGL-0.6703/include/GL/freeglut_std.h
OpenGL-0.6703/include/GL/gl.h
OpenGL-0.6703/include/GL/glext.h
OpenGL-0.6703/include/GL/glprocs.h
OpenGL-0.6703/include/GL/glu.h
OpenGL-0.6703/include/GL/glut.h
OpenGL-0.6703/include/GL/glxext.h
OpenGL-0.6703/include/GL/SGIFreeSWLicB.1.1.pdf
OpenGL-0.6703/include/GL/wglext.h
OpenGL-0.6703/INSTALL
OpenGL-0.6703/isosurf.bin
OpenGL-0.6703/isosurf.pl
OpenGL-0.6703/KNOWN_PROBLEMS
OpenGL-0.6703/Makefile.PL
OpenGL-0.6703/MANIFEST
OpenGL-0.6703/MANIFEST.SKIP
OpenGL-0.6703/menutest.pl
OpenGL-0.6703/META.json
OpenGL-0.6703/META.yml
OpenGL-0.6703/MYMETA.json
OpenGL-0.6703/MYMETA.yml
OpenGL-0.6703/oga.pl
OpenGL-0.6703/OpenGL.pm
OpenGL-0.6703/OpenGL.pod
OpenGL-0.6703/OpenGL.xs
OpenGL-0.6703/opengl_glut.xs
OpenGL-0.6703/os2pm_X.h
OpenGL-0.6703/pgopogl.h
OpenGL-0.6703/pgopogl.xs
OpenGL-0.6703/pixel_buffer_object.txt
OpenGL-0.6703/pogl-api.txt
OpenGL-0.6703/pogl_const.xs
OpenGL-0.6703/pogl_glu.xs
OpenGL-0.6703/pogl_glut.xs
OpenGL-0.6703/pogl_gl_Accu_GetM.xs
OpenGL-0.6703/pogl_gl_GetP_Pass.xs
OpenGL-0.6703/pogl_gl_Mult_Prog.xs
OpenGL-0.6703/pogl_gl_Pixe_Ver2.xs
OpenGL-0.6703/pogl_gl_Prog_Clam.xs
OpenGL-0.6703/pogl_gl_Tex2_Draw.xs
OpenGL-0.6703/pogl_gl_top.xs
OpenGL-0.6703/pogl_gl_Ver3_Tex1.xs
OpenGL-0.6703/pogl_gl_Vert_Multi.xs
OpenGL-0.6703/pogl_rpn.xs
OpenGL-0.6703/ppport.h
OpenGL-0.6703/README
OpenGL-0.6703/Release_Notes
OpenGL-0.6703/SUPPORTS
OpenGL-0.6703/t/
OpenGL-0.6703/t/00_require.t
OpenGL-0.6703/t/01_use.t
OpenGL-0.6703/t/10_opengl_array.t
OpenGL-0.6703/Tessellation.pod
OpenGL-0.6703/test.jpg
OpenGL-0.6703/test.pl
OpenGL-0.6703/test.tga
OpenGL-0.6703/TODO
OpenGL-0.6703/typemap
OpenGL-0.6703/utils/
OpenGL-0.6703/utils/cleanup.pl
OpenGL-0.6703/utils/const.pl
OpenGL-0.6703/utils/exports.pl
OpenGL-0.6703/utils/exports.txt
OpenGL-0.6703/utils/glext_procs.pl
OpenGL-0.6703/utils/glversion.c
OpenGL-0.6703/utils/hdr_diff.pl
OpenGL-0.6703/utils/Makefile
OpenGL-0.6703/utils/Makefile.cygwin
OpenGL-0.6703/utils/Makefile.macosx
OpenGL-0.6703/utils/makefile.mak
OpenGL-0.6703/utils/makefile.mingw
OpenGL-0.6703/utils/mingw.bat
OpenGL-0.6703/utils/opengl32.txt
OpenGL-0.6703/utils/strawberry.bat
OpenGL-0.6703/utils/wgl_ext.txt
OpenGL-0.6703/vertex.arb
OpenGL-0.6703/vertex.cg
OpenGL-0.6703/vertex.glsl
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building C/CH/CHM/OpenGL-0.6703.tar.gz
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Sun Nov 30 10:00:55 neko.activestate.com glversion[58195] : kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
_RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
2014-11-30 10:00:55.515 glversion[58195:903] invalid CoreGraphics connection
2014-11-30 10:00:55.517 glversion[58195:903] invalid CoreGraphics connection
2014-11-30 10:00:55.517 glversion[58195:903] GLUT Fatal Error: pixel format with necessary capabilities not found.
make: *** [glversion.txt] Error 1
No 'Makefile' created CHM/OpenGL-0.6703.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- NOT OK
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'test'
Running make test
Make had some problems, won't test
Running Build for M/MD/MDOOTSON/HiPi-0.33.tar.gz
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /Users/fly2000/var/cpan/build/HiPi-0.33-rybFQ6
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building M/MD/MDOOTSON/HiPi-0.33.tar.gz
Warning: Prerequisite 'IO::Epoll => 0' for 'MDOOTSON/HiPi-0.33.tar.gz' failed when processing 'BRUCEK/IO-Epoll-0.03.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'OpenGL => 0' for 'MDOOTSON/HiPi-0.33.tar.gz' failed when processing 'CHM/OpenGL-0.6703.tar.gz' with 'writemakefile => NO -- No 'Makefile' created
'. Continuing, but chances to succeed are limited.
>>> ./Build
Building HiPi
Building wiringPi library
SH make
make: invalid option -- a
make: invalid option -- c
Usage: make [options] [target] ...
Options:
-b, -m Ignored for compatibility.
-B, --always-make Unconditionally make all targets.
-C DIRECTORY, --directory=DIRECTORY
Change to DIRECTORY before doing anything.
-d Print lots of debugging information.
--debug[=FLAGS] Print various types of debugging information.
-e, --environment-overrides
Environment variables override makefiles.
-f FILE, --file=FILE, --makefile=FILE
Read FILE as a makefile.
-h, --help Print this message and exit.
-i, --ignore-errors Ignore errors from commands.
-I DIRECTORY, --include-dir=DIRECTORY
Search DIRECTORY for included makefiles.
-j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg.
-k, --keep-going Keep going when some targets can't be made.
-l [N], --load-average[=N], --max-load[=N]
Don't start multiple jobs unless load is below N.
-L, --check-symlink-times Use the latest mtime between symlinks and target.
-n, --just-print, --dry-run, --recon
Don't actually run any commands; just print them.
-o FILE, --old-file=FILE, --assume-old=FILE
Consider FILE to be very old and don't remake it.
-p, --print-data-base Print make's internal database.
-q, --question Run no commands; exit status says if up to date.
-r, --no-builtin-rules Disable the built-in implicit rules.
-R, --no-builtin-variables Disable the built-in variable settings.
-s, --silent, --quiet Don't echo commands.
-S, --no-keep-going, --stop
Turns off -k.
-t, --touch Touch targets instead of remaking them.
-v, --version Print the version number of make and exit.
-w, --print-directory Print the current directory.
--no-print-directory Turn off -w, even if it was turned on implicitly.
-W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE
Consider FILE to be infinitely new.
--warn-undefined-variables Warn when an undefined variable is referenced.
-N OPTION, --NeXT-option=OPTION
Turn on value of NeXT OPTION.
This program built for i386-apple-darwin10.0
Report bugs to
Failed with exit code 512
make static CC=gcc CXX=g++ LD=cc -mmacosx-version-min=10.5
MDOOTSON/HiPi-0.33.tar.gz
./Build -- NOT OK
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'test'
Running Build test
Can't test without successful make
Running test for module 'GStreamer1'
Running make for T/TM/TMURRAY/GStreamer1-0.003.tar.gz
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'get'
Checksum for /data/cpan/authors/id/T/TM/TMURRAY/GStreamer1-0.003.tar.gz ok
GStreamer1-0.003/
GStreamer1-0.003/MANIFEST
GStreamer1-0.003/lib/
GStreamer1-0.003/lib/GStreamer1.pm
GStreamer1-0.003/lib/GStreamer1/
GStreamer1-0.003/lib/GStreamer1/Caps/
GStreamer1-0.003/lib/GStreamer1/Caps/Simple.pm
GStreamer1-0.003/examples/
GStreamer1-0.003/examples/rpi_pic.pl
GStreamer1-0.003/examples/hello.pl
GStreamer1-0.003/examples/symdump.pl
GStreamer1-0.003/META.json
GStreamer1-0.003/CHANGELOG
GStreamer1-0.003/Makefile.PL
GStreamer1-0.003/dist.ini
GStreamer1-0.003/t/
GStreamer1-0.003/t/010_caps_simple.t
GStreamer1-0.003/t/001_load.t
GStreamer1-0.003/t/002_pod.t
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building T/TM/TMURRAY/GStreamer1-0.003.tar.gz
>>> /Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL
Can't link/include C library 'gstreamer-1.0', aborting.
No 'Makefile' created TMURRAY/GStreamer1-0.003.tar.gz
/Users/fly2000/ap2000-298465/bin/perl-dynamic Makefile.PL -- NOT OK
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'test'
Running make test
Make had some problems, won't test
Running make for T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /Users/fly2000/var/cpan/build/Device-WebIO-RaspberryPi-0.007-Eyftia
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building T/TM/TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
Warning: Prerequisite 'HiPi => 0' for 'TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz' failed when processing 'MDOOTSON/HiPi-0.33.tar.gz' with 'make => NO'. Continuing, but chances to succeed are limited.
Warning: Prerequisite 'GStreamer1 => 0.002' for 'TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz' failed when processing 'TMURRAY/GStreamer1-0.003.tar.gz' with 'writemakefile => NO -- No 'Makefile' created
'. Continuing, but chances to succeed are limited.
>>> make
cp lib/Device/WebIO/RaspberryPi.pm blib/lib/Device/WebIO/RaspberryPi.pm
Manifying 1 pod document
TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
make -- OK
Prepending /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2000/ap2000-298465/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Device::WebIO::RaspberryPi;'
# at t/001_load.t line 27.
# Tried to use 'Device::WebIO::RaspberryPi'.
# Error: Can't locate HiPi/Wiring.pm in @INC (you may need to install the HiPi::Wiring module) (@INC contains: /Users/fly2000/var/cpan/build/Device-WebIO-RaspberryPi-0.007-Eyftia/blib/lib /Users/fly2000/var/cpan/build/Device-WebIO-RaspberryPi-0.007-Eyftia/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib /Users/fly2000/var/megalib /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/arch /Users/fly2000/var/cpan/build/Device-WebIO-0.008-AYIwzn/blib/lib /Users/fly2000/var/megalib /Users/fly2000/Library/ActivePerl-5.20/lib /Users/fly2000/ap2000-298465/site/lib /Users/fly2000/ap2000-298465/lib .) at /Users/fly2000/var/cpan/build/Device-WebIO-RaspberryPi-0.007-Eyftia/blib/lib/Device/WebIO/RaspberryPi.pm line 30.
# BEGIN failed--compilation aborted at /Users/fly2000/var/cpan/build/Device-WebIO-RaspberryPi-0.007-Eyftia/blib/lib/Device/WebIO/RaspberryPi.pm line 30.
# Compilation failed in require at t/001_load.t line 27.
# BEGIN failed--compilation aborted at t/001_load.t line 27.
# Looks like you failed 1 test of 1.
t/001_load.t ..
1..1
not ok 1 - use Device::WebIO::RaspberryPi;
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/002_pod.t ...
1..1
ok 1 - POD test for lib/Device/WebIO/RaspberryPi.pm
ok
Test Summary Report
-------------------
t/001_load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=2, Tests=2, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.15 cusr 0.03 csys = 0.22 CPU)
Result: FAIL
Failed 1/2 test programs. 1/2 subtests failed.
make: *** [test_dynamic] Error 255
TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
2 dependencies missing (HiPi,GStreamer1); additionally test harness failed
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports TMURRAY/Device-WebIO-RaspberryPi-0.007.tar.gz
Finished 2014-11-30T10:01:09