PATH=/usr/bin:/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin
Start 2017-02-01T00:11:36
ActivePerl-2200 CPAN-2.10
Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata'
  Database was generated on Mon, 30 Jan 2017 06:17:03 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/I/IN/INGY/Module-Compile-0.35.tar.gz
Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/I/IN/INGY/Module-Compile-0.35.tar.gz ok
Module-Compile-0.35/
Module-Compile-0.35/META.yml
Module-Compile-0.35/LICENSE
Module-Compile-0.35/Makefile.PL
Module-Compile-0.35/README
Module-Compile-0.35/t/
Module-Compile-0.35/t/lexical.t
Module-Compile-0.35/t/lib/
Module-Compile-0.35/t/lib/Foo.pm
Module-Compile-0.35/t/lib/Upper.pm
Module-Compile-0.35/t/lib/DataTest.pm
Module-Compile-0.35/t/lib/Indented.pm
Module-Compile-0.35/t/lib/Pre.p
Module-Compile-0.35/t/TestModuleCompile.pm
Module-Compile-0.35/t/pm.t
Module-Compile-0.35/t/Testorz.pm
Module-Compile-0.35/t/release-pod-syntax.t
Module-Compile-0.35/t/fold_blocks.t
Module-Compile-0.35/t/000-compile-modules.t
Module-Compile-0.35/t/parse.t
Module-Compile-0.35/t/data1.t
Module-Compile-0.35/t/compile.t
Module-Compile-0.35/t/orz.t
Module-Compile-0.35/t/pmc.t
Module-Compile-0.35/t/data2.t
Module-Compile-0.35/lib/
Module-Compile-0.35/lib/Module/
Module-Compile-0.35/lib/Module/Compile/
Module-Compile-0.35/lib/Module/Compile/Opt.pm
Module-Compile-0.35/lib/Module/Compile/Opt.pod
Module-Compile-0.35/lib/Module/Compile/Optimize.pod
Module-Compile-0.35/lib/Module/Optimize.pm
Module-Compile-0.35/lib/Module/Compile.pod
Module-Compile-0.35/lib/Module/Compile.pm
Module-Compile-0.35/MANIFEST
Module-Compile-0.35/Changes
Module-Compile-0.35/CONTRIBUTING
Module-Compile-0.35/META.json
Module-Compile-0.35/inc/
Module-Compile-0.35/inc/Spiffy.pm
Module-Compile-0.35/inc/Test/
Module-Compile-0.35/inc/Test/Base/
Module-Compile-0.35/inc/Test/Base/Filter.pm
Module-Compile-0.35/inc/Test/Base.pm
Configuring I/IN/INGY/Module-Compile-0.35.tar.gz with Makefile.PL
>>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2200/cpanfly-5.22/var/megalib
Want /Users/fly2200/ap2200-299195/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Module::Compile
Writing MYMETA.yml and MYMETA.json
  INGY/Module-Compile-0.35.tar.gz
  /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK
Running make for I/IN/INGY/Module-Compile-0.35.tar.gz
>>> make
cp lib/Module/Optimize.pm blib/lib/Module/Optimize.pm
cp lib/Module/Compile/Optimize.pod blib/lib/Module/Compile/Optimize.pod
cp lib/Module/Compile/Opt.pm blib/lib/Module/Compile/Opt.pm
cp lib/Module/Compile/Opt.pod blib/lib/Module/Compile/Opt.pod
cp lib/Module/Compile.pod blib/lib/Module/Compile.pod
cp lib/Module/Compile.pm blib/lib/Module/Compile.pm
Manifying 3 pod documents
  INGY/Module-Compile-0.35.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/000-compile-modules.t .. 
ok 1 - use Module::Compile;
ok 2 - use Module::Optimize;
ok 3 - use Module::Compile::Opt;
1..3
ok
t/compile.t .............. 
1..2
ok 1 - use_means_now
ok 2 - Nested Compilers
ok
t/data1.t ................ 
1..3
ok 1 - .pmc doesn't exist yet
ok 2 - .pmc exists
ok 3 - DATA section is correct
ok
t/data2.t ................ 
1..3
ok 1 - .pmc exists
ok 2 - .pmc still exists
ok 3 - DATA section is correct
ok
t/fold_blocks.t .......... 
1..9
ok 1 - Fold a heredoc whilst preserving ~s
ok 2 - Folded heredoc, ignoring <<=
ok 3 - Empty string termination
ok 4 - A double heredoc
ok 5 - A double heredoc. Same END token
ok 6 - A Heredoc inside Pod
ok 7 - A Heredoc inside comment block
ok 8 - Not a heredoc, but a literal "<<"
ok 9 - All kinds
ok
t/lexical.t .............. 
1..1
ok 1 - Lexical compilation not implemented yet
ok
t/orz.t .................. 
1..5
ok 1 - Test runs
ok 2 - Compiled file exists
ok 3 - orz was here
ok 4 - t/orz.t
ok 5 - Second half of test runs
ok
t/parse.t ................ 
1..1
ok 1 - Parse compiler in block scope
ok
t/pm.t ................... skipped: In progress...
t/pmc.t .................. 
1..1
ok 1 - Compile Foo.pm to Foo.pmc
ok
t/release-pod-syntax.t ... skipped: these tests are for release candidate testing
All tests successful.
Files=11, Tests=28,  1 wallclock secs ( 0.03 usr  0.02 sys +  0.43 cusr  0.08 csys =  0.56 CPU)
Result: PASS
  INGY/Module-Compile-0.35.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Module-Compile" VERSION="0.35" DATE="2014-12-24">
  <AUTHOR CPAN="INGY">Ingy dot Net &lt;ingy@cpan.org></AUTHOR>
  <ABSTRACT>Perl Module Compilation</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.22"/>
  <CODEBASE HREF="Module-Compile-0.35.tar.gz"/>
  <PROVIDE NAME="Module::Compile" VERSION="0.35"/>
  <PROVIDE NAME="Module::Optimize"/>
  <PROVIDE NAME="Module::Compile::Opt"/>
  <REQUIRE NAME="Digest::SHA1" VERSION="2.13"/>
  <!-- Built 2017-02-01 with ActivePerl-2200 on perl-osx (Mac OS X 10.9.5) log Module-Compile-0.35.d/log-20170201T001135.txt -->
</SOFTPKG>
>>> (cd /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Module-Compile-0.35-gDgU5g && tar cvf - Module-Compile-0.35.ppd blib) | gzip -c >/Users/fly2200/cpanfly-5.22/var/REPO/I/IN/INGY/Module-Compile-0.35.tar.gz
Module-Compile-0.35.ppd
blib/
blib/lib/
blib/lib/Module/
blib/lib/Module/Compile/
blib/lib/Module/Compile/Opt.pm
blib/lib/Module/Compile/Opt.pod
blib/lib/Module/Compile/Optimize.pod
blib/lib/Module/Compile.pm
blib/lib/Module/Compile.pod
blib/lib/Module/Optimize.pm
blib/man3/
blib/man3/Module::Compile.3
blib/man3/Module::Compile::Opt.3
blib/man3/Module::Compile::Optimize.3
Finished 2017-02-01T00:11:42