PATH=/usr/bin:/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin
Start 2017-02-05T01:43:30
ActivePerl-2200 CPAN-2.10
Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata'
  Database was generated on Sat, 04 Feb 2017 07:05:48 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/O/OA/OALDERS/Acme-Odometer-0.0.4.tar.gz
Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/O/OA/OALDERS/Acme-Odometer-0.0.4.tar.gz ok
Acme-Odometer-0.0.4/
Acme-Odometer-0.0.4/assets/
Acme-Odometer-0.0.4/Build.PL
Acme-Odometer-0.0.4/Changes
Acme-Odometer-0.0.4/dist.ini
Acme-Odometer-0.0.4/examples/
Acme-Odometer-0.0.4/INSTALL
Acme-Odometer-0.0.4/lib/
Acme-Odometer-0.0.4/LICENSE
Acme-Odometer-0.0.4/Makefile.PL
Acme-Odometer-0.0.4/MANIFEST
Acme-Odometer-0.0.4/META.json
Acme-Odometer-0.0.4/META.yml
Acme-Odometer-0.0.4/README
Acme-Odometer-0.0.4/t/
Acme-Odometer-0.0.4/t/author-critic.t
Acme-Odometer-0.0.4/t/author-pod-spell.t
Acme-Odometer-0.0.4/t/load.t
Acme-Odometer-0.0.4/t/release-cpan-changes.t
Acme-Odometer-0.0.4/t/release-pod-coverage.t
Acme-Odometer-0.0.4/lib/Acme/
Acme-Odometer-0.0.4/lib/Acme/Odometer.pm
Acme-Odometer-0.0.4/examples/write_gif.pl
Acme-Odometer-0.0.4/assets/odometer/
Acme-Odometer-0.0.4/assets/odometer/0.gif
Acme-Odometer-0.0.4/assets/odometer/1.gif
Acme-Odometer-0.0.4/assets/odometer/2.gif
Acme-Odometer-0.0.4/assets/odometer/3.gif
Acme-Odometer-0.0.4/assets/odometer/4.gif
Acme-Odometer-0.0.4/assets/odometer/5.gif
Acme-Odometer-0.0.4/assets/odometer/6.gif
Acme-Odometer-0.0.4/assets/odometer/7.gif
Acme-Odometer-0.0.4/assets/odometer/8.gif
Acme-Odometer-0.0.4/assets/odometer/9.gif
Configuring O/OA/OALDERS/Acme-Odometer-0.0.4.tar.gz with Makefile.PL
>>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2200/cpanfly-5.22/var/megalib
Want /Users/fly2200/ap2200-299195/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Acme::Odometer
Writing MYMETA.yml and MYMETA.json
  OALDERS/Acme-Odometer-0.0.4.tar.gz
  /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK
Running make for O/OA/OALDERS/Acme-Odometer-0.0.4.tar.gz
>>> make
cp lib/Acme/Odometer.pm blib/lib/Acme/Odometer.pm
Manifying 1 pod document
  OALDERS/Acme-Odometer-0.0.4.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/author-critic.t ......... skipped: these tests are for testing by the author
t/author-pod-spell.t ...... skipped: these tests are for testing by the author
Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Acme-Odometer-0.0.4-PlFJt6/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Acme-Odometer-0.0.4-PlFJt6/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4.
BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4.
Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170.
Compilation failed in require at t/load.t line 3.
BEGIN failed--compilation aborted at t/load.t line 3.
t/load.t .................. 
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run 
t/release-cpan-changes.t .. skipped: these tests are for release candidate testing
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing

Test Summary Report
-------------------
t/load.t                (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: No plan found in TAP output
Files=5, Tests=0,  1 wallclock secs ( 0.02 usr  0.01 sys +  0.14 cusr  0.03 csys =  0.20 CPU)
Result: FAIL
Failed 1/5 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255
  OALDERS/Acme-Odometer-0.0.4.tar.gz
  make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports OALDERS/Acme-Odometer-0.0.4.tar.gz
Finished 2017-02-05T01:43:35