PATH=/usr/bin:/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin Start 2017-01-12T01:45:58 ActivePerl-2200 CPAN-2.10 Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata' Database was generated on Wed, 11 Jan 2017 06:53:58 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/App-ParseCPANChanges-0.06.tar.gz Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-ParseCPANChanges-0.06.tar.gz ok App-ParseCPANChanges-0.06/ App-ParseCPANChanges-0.06/bin/ App-ParseCPANChanges-0.06/bin/parse-cpan-changes App-ParseCPANChanges-0.06/META.json App-ParseCPANChanges-0.06/LICENSE App-ParseCPANChanges-0.06/Changes App-ParseCPANChanges-0.06/META.yml App-ParseCPANChanges-0.06/Makefile.PL App-ParseCPANChanges-0.06/t/ App-ParseCPANChanges-0.06/t/release-pod-syntax.t App-ParseCPANChanges-0.06/t/release-pod-coverage.t App-ParseCPANChanges-0.06/t/release-rinci.t App-ParseCPANChanges-0.06/t/00-compile.t App-ParseCPANChanges-0.06/README App-ParseCPANChanges-0.06/dist.ini App-ParseCPANChanges-0.06/lib/ App-ParseCPANChanges-0.06/lib/App/ App-ParseCPANChanges-0.06/lib/App/ParseCPANChanges.pm App-ParseCPANChanges-0.06/MANIFEST App-ParseCPANChanges-0.06/weaver.ini Configuring P/PE/PERLANCAR/App-ParseCPANChanges-0.06.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::CmdLine::Any 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::ParseCPANChanges Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-ParseCPANChanges-0.06.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-ParseCPANChanges-0.06.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-ParseCPANChanges-0.06.tar.gz ---- Perinci::CmdLine::Any [requires] Running test for module 'Perinci::CmdLine::Any' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz ok Perinci-CmdLine-Any-0.13/ Perinci-CmdLine-Any-0.13/README Perinci-CmdLine-Any-0.13/dist.ini Perinci-CmdLine-Any-0.13/Makefile.PL Perinci-CmdLine-Any-0.13/META.yml Perinci-CmdLine-Any-0.13/t/ Perinci-CmdLine-Any-0.13/t/author-pod-syntax.t Perinci-CmdLine-Any-0.13/t/00-compile.t Perinci-CmdLine-Any-0.13/t/author-pod-coverage.t Perinci-CmdLine-Any-0.13/weaver.ini Perinci-CmdLine-Any-0.13/META.json Perinci-CmdLine-Any-0.13/MANIFEST Perinci-CmdLine-Any-0.13/lib/ Perinci-CmdLine-Any-0.13/lib/Perinci/ Perinci-CmdLine-Any-0.13/lib/Perinci/CmdLine/ Perinci-CmdLine-Any-0.13/lib/Perinci/CmdLine/Any.pm Perinci-CmdLine-Any-0.13/LICENSE Perinci-CmdLine-Any-0.13/Changes Configuring P/PE/PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::CmdLine::Lite 1.56 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::CmdLine::Any Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz ---- Perinci::CmdLine::Lite [requires] Running test for module 'Perinci::CmdLine::Lite' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz ok Perinci-CmdLine-Lite-1.70/ Perinci-CmdLine-Lite-1.70/README Perinci-CmdLine-Lite-1.70/lib/ Perinci-CmdLine-Lite-1.70/lib/Perinci/ Perinci-CmdLine-Lite-1.70/lib/Perinci/CmdLine/ Perinci-CmdLine-Lite-1.70/lib/Perinci/CmdLine/Lite.pm Perinci-CmdLine-Lite-1.70/lib/Perinci/CmdLine/Base.pm Perinci-CmdLine-Lite-1.70/Makefile.PL Perinci-CmdLine-Lite-1.70/share/ Perinci-CmdLine-Lite-1.70/share/templates/ Perinci-CmdLine-Lite-1.70/share/templates/description.txt Perinci-CmdLine-Lite-1.70/share/templates/synopsis.txt Perinci-CmdLine-Lite-1.70/Changes Perinci-CmdLine-Lite-1.70/dist.ini Perinci-CmdLine-Lite-1.70/LICENSE Perinci-CmdLine-Lite-1.70/t/ Perinci-CmdLine-Lite-1.70/t/00-compile.t Perinci-CmdLine-Lite-1.70/t/suite.t Perinci-CmdLine-Lite-1.70/t/author-pod-syntax.t Perinci-CmdLine-Lite-1.70/t/author-pod-coverage.t Perinci-CmdLine-Lite-1.70/weaver.ini Perinci-CmdLine-Lite-1.70/MANIFEST Perinci-CmdLine-Lite-1.70/META.json Perinci-CmdLine-Lite-1.70/META.yml Perinci-CmdLine-Lite-1.70/devscripts/ Perinci-CmdLine-Lite-1.70/devscripts/bench-startup Configuring P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::Complete 0.89 not found. We have 0.88. Warning: prerequisite Progress::Any::Output::TermProgressBarColor 0.17 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::CmdLine::Lite Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz ---- Perinci::Sub::Complete [requires] Progress::Any::Output::TermProgressBarColor [requires] Running test for module 'Perinci::Sub::Complete' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz ok Perinci-Sub-Complete-0.90/ Perinci-Sub-Complete-0.90/META.json Perinci-Sub-Complete-0.90/LICENSE Perinci-Sub-Complete-0.90/Changes Perinci-Sub-Complete-0.90/META.yml Perinci-Sub-Complete-0.90/Makefile.PL Perinci-Sub-Complete-0.90/t/ Perinci-Sub-Complete-0.90/t/author-pod-coverage.t Perinci-Sub-Complete-0.90/t/complete_arg_index.t Perinci-Sub-Complete-0.90/t/complete_cli_arg.t Perinci-Sub-Complete-0.90/t/complete_from_schema.t Perinci-Sub-Complete-0.90/t/complete_arg_elem.t Perinci-Sub-Complete-0.90/t/complete_arg_val.t Perinci-Sub-Complete-0.90/t/release-rinci.t Perinci-Sub-Complete-0.90/t/author-pod-syntax.t Perinci-Sub-Complete-0.90/t/00-compile.t Perinci-Sub-Complete-0.90/README Perinci-Sub-Complete-0.90/dist.ini Perinci-Sub-Complete-0.90/lib/ Perinci-Sub-Complete-0.90/lib/Perinci/ Perinci-Sub-Complete-0.90/lib/Perinci/Sub/ Perinci-Sub-Complete-0.90/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.90/MANIFEST Perinci-Sub-Complete-0.90/weaver.ini Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz >>> make cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/author-pod-coverage.t ... skipped: these tests are for testing by the author t/author-pod-syntax.t ..... skipped: these tests are for testing by the author t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_index.t .... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Complete-0.90-X7n09Q/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Complete-0.90-X7n09Q/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. t/complete_cli_arg.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/complete_from_schema.t .. # Subtest: schema must be normalized ok 1 1..1 ok 1 - schema must be normalized # Subtest: is clause ok 1 ok 2 1..2 ok 2 - is clause # Subtest: in clause ok 1 1..1 ok 3 - in clause # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 4 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 5 - float # Subtest: any ok 1 ok 2 1..2 ok 6 - any # Subtest: schema is based on other schema ok 1 ok 2 ok 3 1..3 ok 7 - schema is based on other schema 1..7 ok t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/complete_cli_arg.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=9, Tests=11, 1 wallclock secs ( 0.03 usr 0.02 sys + 0.17 cusr 0.04 csys = 0.26 CPU) Result: FAIL Failed 1/9 test programs. 0/11 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz Running test for module 'Progress::Any::Output::TermProgressBarColor' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz ok Progress-Any-Output-TermProgressBarColor-0.22/ Progress-Any-Output-TermProgressBarColor-0.22/README Progress-Any-Output-TermProgressBarColor-0.22/lib/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/Any/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/Any/Output/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/Any/Output/TermProgressBarColor.pm Progress-Any-Output-TermProgressBarColor-0.22/Makefile.PL Progress-Any-Output-TermProgressBarColor-0.22/Changes Progress-Any-Output-TermProgressBarColor-0.22/dist.ini Progress-Any-Output-TermProgressBarColor-0.22/LICENSE Progress-Any-Output-TermProgressBarColor-0.22/t/ Progress-Any-Output-TermProgressBarColor-0.22/t/00-compile.t Progress-Any-Output-TermProgressBarColor-0.22/t/01-basic.t Progress-Any-Output-TermProgressBarColor-0.22/t/author-pod-syntax.t Progress-Any-Output-TermProgressBarColor-0.22/t/author-pod-coverage.t Progress-Any-Output-TermProgressBarColor-0.22/weaver.ini Progress-Any-Output-TermProgressBarColor-0.22/MANIFEST Progress-Any-Output-TermProgressBarColor-0.22/META.json Progress-Any-Output-TermProgressBarColor-0.22/META.yml Configuring P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Progress::Any::Output::TermProgressBarColor Writing MYMETA.yml and MYMETA.json PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz >>> make cp lib/Progress/Any/Output/TermProgressBarColor.pm blib/lib/Progress/Any/Output/TermProgressBarColor.pm Manifying 1 pod document PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..1 ok 1 - Progress/Any/Output/TermProgressBarColor.pm loaded ok ok # Failed test at t/01-basic.t line 18. # ' 10% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'default' # at t/01-basic.t line 20. # Failed test at t/01-basic.t line 28. # 'Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2200/cpanfly-5.22/var/megalib/Color/ANSI/Util.pm line 285. # Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2200/cpanfly-5.22/var/megalib/Color/ANSI/Util.pm line 287. # Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2200/cpanfly-5.22/var/megalib/Color/ANSI/Util.pm line 289. # Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2200/cpanfly-5.22/var/megalib/Color/ANSI/Util.pm line 285. # Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2200/cpanfly-5.22/var/megalib/Color/ANSI/Util.pm line 287. # Use of uninitialized value $cd in numeric ge (>=) at /Users/fly2200/cpanfly-5.22/var/megalib/Color/ANSI/Util.pm line 289. # 20% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'fh option' # at t/01-basic.t line 30. # Failed test at t/01-basic.t line 41. # ' 30% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'default (wide)' # at t/01-basic.t line 43. # Looks like you failed 3 tests of 3. t/01-basic.t ............. # Subtest: default not ok 1 ok 2 1..2 not ok 1 - default # Subtest: fh option not ok 1 ok 2 1..2 not ok 2 - fh option # Subtest: default (wide) not ok 1 ok 2 1..2 not ok 3 - default (wide) 1..3 Dubious, test returned 3 (wstat 768, 0x300) Failed 3/3 subtests t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author Test Summary Report ------------------- t/01-basic.t (Wstat: 768 Tests: 3 Failed: 3) Failed tests: 1-3 Non-zero exit status: 3 Files=4, Tests=4, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.17 cusr 0.03 csys = 0.24 CPU) Result: FAIL Failed 1/4 test programs. 3/4 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1 PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz Warning: Prerequisite 'Perinci::Sub::Complete => 0.89' for 'PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz' failed when processing 'PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Progress::Any::Output::TermProgressBarColor => 0.17' for 'PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz' failed when processing 'PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp share/templates/synopsis.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt cp share/templates/description.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm Manifying 2 pod documents PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt (unchanged) Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt (unchanged) PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..2 ok 1 - Perinci/CmdLine/Base.pm loaded ok ok 2 - Perinci/CmdLine/Lite.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliR6lVka3s: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^msi:^Usage.+^([^\n]*)Options)' # Looks like you failed 2 tests of 2. # Failed test '--help' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliBabuuOyj: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^msi:^Usage.+^([^\n]*)Options)' # Looks like you failed 2 tests of 2. # Failed test 'extra args is okay' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cli9sEzH0FH: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^ms:^Subcommands.+\bsc1\b)' # Looks like you failed 2 tests of 2. # Failed test 'help for cli with subcommands' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliBMjuSwDI: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^ms:Do nothing.+^Usage)' # Looks like you failed 2 tests of 3. # Failed test 'help on a subcommand' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 4 tests of 7. # Failed test 'help action' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliQJ5DIuwS: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:0\.77)' # Looks like you failed 2 tests of 2. # Failed test '--version' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 1 test of 2. # Failed test 'version action' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliYL6j6ZKI: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^$)' # Looks like you failed 2 tests of 2. # Failed test 'default_subcommand' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '100' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'default_subcommand 2' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 2 tests of 5. # Failed test 'subcommands action' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliH14BjDbQ: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^144$)' # Looks like you failed 2 tests of 2. # Failed test 'embedded function+meta works' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '100' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'missing required args -> error' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^s:^\[\s*"?200"?,\s*"OK",\s*"abc",\s*\{.*\}\s*\])' # Looks like you failed 2 tests of 2. # Failed test 'common option: --format' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^s:^\[\s*"?200"?,\s*"OK",\s*"abc",\s*\{.*\}\s*\])' # Looks like you failed 2 tests of 2. # Failed test 'common option: --json' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'null # ' # doesn't match '(?^s:^"abc"$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --naked-res' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^s:^\[\s*"?200"?,\s*"OK",\s*"abc",\s*\{.*\}\s*\])' # Looks like you failed 2 tests of 2. # Failed test 'common option: --no-naked-res' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clirch_UjNa: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^s:^odd$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --cmd' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^s:^\[\s*"?200"?,\s*"OK",\s*\[\s*"a",\s*"b"\s*\],\s*\{.*\}\s*\])' # Looks like you failed 2 tests of 2. # Failed test 'json argument' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliXk_xJSkY: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:Hello, world)' # Looks like you failed 2 tests of 2. # Failed test 'can handle function which returns naked result' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 9 tests of 11. # Failed test 'call action' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '231' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'unknown value' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '231' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'arg type not str/array' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 2 tests of 4. # Failed test 'cmdline_src (error cases)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clifSEL2Irc: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=foo)' # Looks like you failed 2 tests of 2. # Failed test 'file 1' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_src_a1"\s*:\s*"file")' # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_srcfilenames_a1"\s*:\s*\[)' # Looks like you failed 3 tests of 3. # Failed test 'file 1 (special hint arguments passed)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliPeWCFpUd: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=foo\na2=\[bar\n,baz\])' # Looks like you failed 2 tests of 2. # Failed test 'file 2' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_src_a1"\s*:\s*"file")' # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_src_a2"\s*:\s*"file")' # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_srcfilenames_a1"\s*:\s*\[)' # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_srcfilenames_a2"\s*:\s*\[)' # Looks like you failed 5 tests of 5. # Failed test 'file 2 (special hint arguments passed)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '100' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'file, missing required arg' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 5 tests of 7. # Failed test 'cmdline_src (file)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliowmsUUWq: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=bar\nbaz)' # Looks like you failed 2 tests of 2. # Failed test 'stdin str' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx: # "-cmdline_src_a1"\s*:\s*"stdin" # )' # Looks like you failed 2 tests of 2. # Failed test 'stdin str (special hint arguments passed)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliGk9E216w: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=\[bar\n,baz\])' # Looks like you failed 2 tests of 2. # Failed test 'stdin array' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliEY354Cr9: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=bar\nbaz)' # Looks like you failed 2 tests of 2. # Failed test 'stdin + arg set to "-"' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '100' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'stdin + arg set to non "-"' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 5 tests of 6. # Failed test 'cmdline_src (stdin)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cli60nAdGXI: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=foo\na2=bar)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_line + from stdin' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_src_a1"\s*:\s*"stdin_line")' # Looks like you failed 2 tests of 2. # Failed test 'stdin_line + from stdin (special hint arguments passed)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clid143lt_1: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=qux\na2=bar)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_line + from cmdline' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliFn7BKFgk: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=foo\na2=bar\na3=baz)' # Looks like you failed 2 tests of 2. # Failed test 'multi stdin_line' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 4 tests of 5. # Failed test 'cmdline_src (stdin_line)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clilMb_GrHX: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=foo$)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_file file' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliLLtptL9T: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=foo$)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_file file (extra argument)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_src_a1"\s*:\s*"stdin_or_file")' # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_srcfilenames_a1"\s*:\s*\[)' # Looks like you failed 3 tests of 3. # Failed test 'stdin_or_file file (special hint arguments passed)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clipAlO7bRP: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=bar\nbaz$)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_file stdin str' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cli1vPRvlEq: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=\[bar\n,baz\])' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_file stdin str' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 5 tests of 7. # Failed test 'cmdline_src (stdin_or_file)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cligmlNOnBY: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=\[foo,bar\n,baz\]$)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_files file' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_src_a1"\s*:\s*"stdin_or_files")' # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 390. # '[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # ' # doesn't match '(?^sx:"-cmdline_srcfilenames_a1"\s*:\s*\[)' # Looks like you failed 3 tests of 3. # Failed test 'stdin_or_files file (special hint arguments passed)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cli4oG3J1Qg: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=bar\nbaz$)' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_files stdin str' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliPC4RaVQm: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=\[bar\n,baz\])' # Looks like you failed 2 tests of 2. # Failed test 'stdin_or_files stdin str' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 4 tests of 6. # Failed test 'cmdline_src (stdin_or_files)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cli2P7Z3xX4: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=\[x\])' # Looks like you failed 2 tests of 2. # Failed test 'from arg' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cli1J6EJ4CK: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a1=\[bar,baz\])' # Looks like you failed 2 tests of 2. # Failed test 'from stdin' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 2 tests of 3. # Failed test 'cmdline_src (stdin_or_args)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clihyDr5TPP: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:wet)' # Looks like you failed 2 tests of 2. # Failed test 'dry-run (via env, 0)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliHcKWyCFD: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:dry)' # Looks like you failed 2 tests of 2. # Failed test 'dry-run (via env, 1)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliH0P2tXVd: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:dry)' # Looks like you failed 2 tests of 2. # Failed test 'dry-run (via cmdline opt)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 3 tests of 4. # Failed test 'dry-run' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clidn8MHh5O: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^mx: # 3 # )' # Looks like you failed 2 tests of 2. # Failed test 'stream input, simple type, chomp on' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliTFtB0X_u: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^mx: # ^chars \s+ 19\n # ^lines \s+ 3\n # ^words \s+ 4\n # )' # Looks like you failed 2 tests of 2. # Failed test 'stream input, simple type, chomp off' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clirj7fqOIR: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^mx:^keys \s+ 4\n)' # Looks like you failed 2 tests of 2. # Failed test 'stream input, json stream' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clijXafNw41: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^mx: # ^\{\"num\"\:1\}\n # ^\{\"num\"\:2\}\n # ^\{\"num\"\:3\}\n # )' # Looks like you failed 2 tests of 2. # Failed test 'stream result, json stream' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliZwToxUy0: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^mx: # ^"?1"?\n # ^"?9"?\n # ^"?25"?\n # )' # Looks like you failed 2 tests of 2. # Failed test 'stream input+result, simple type, float validation' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 5 tests of 13. # Failed test 'streaming' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '7' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'cmdline.exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clirZOoL2qp: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:false)' # Looks like you failed 2 tests of 2. # Failed test 'cmdline.result' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliueH8vpSv: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:null)' # Looks like you failed 2 tests of 2. # Failed test 'cmdline.default_format' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'cliyX7MVobz: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:\A\z)' # Looks like you failed 2 tests of 2. # Failed test 'cmdline.default_format (overriden by cmdline opt)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'clinF_SBkl8: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:ARRAY\(0x)' # Looks like you failed 2 tests of 2. # Failed test 'cmdline.skip_format' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 5 tests of 6. # Failed test 'result metadata' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '2' # expected: '0' # Script's stdout: <> # Script's stderr: # Failed test 'answer' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 458. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = '--number' # [] # Looks like you failed 2 tests of 2. # Failed test 'self-completion works' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '2' # expected: '0' # Script's stdout: <> # Script's stderr: # Failed test 'answer' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 458. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = 'sc1' # [] # Looks like you failed 2 tests of 2. # Failed test 'completion of subcommand name' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '2' # expected: '0' # Script's stdout: <> # Script's stderr: # Failed test 'answer' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 458. # Structures begin differing at: # $got->[0] = Does not exist # $expected->[0] = '--number' # [] # Looks like you failed 2 tests of 2. # Failed test 'completion of subcommand option' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 3 tests of 4. # Failed test 'completion' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'sum-nums: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^s:^6$)' # Looks like you failed 2 tests of 2. # Failed test 'env read' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'sum-nums: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^s:^3$)' # Looks like you failed 2 tests of 2. # Failed test 'turned off via --no-env' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'sum-nums: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^s:^18$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:env_name' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 3 tests of 4. # Failed test 'env' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=101\nb=201\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:config_dirs' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=104\nb=\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:config_filename' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=104\nb=303\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:config_filename (hash record)' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=104\nb=307\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'attr:config_filename (hash record) + --config-profile' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=\nb=\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --no-config' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=101\nb=201\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --config-path' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:a=111\nb=201\nc=\nd=201\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'common option: --config-profile' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '112' # Script's stdout: # Script's stderr: <> # Looks like you failed 1 test of 1. # Failed test 'unknown config profile -> error' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'foo: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=\nb=\nc=\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'unknown config profile but does not read config -> ok' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=102\nb=201\nc=201\nd=\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'subcommand' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^a=121\nb=201\nc=201\nd=201\ne=$)' # Looks like you failed 2 tests of 2. # Failed test 'subcommand + --config-profile' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'sum: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^0$)' # Looks like you failed 2 tests of 2. # Failed test 'array-ify if argument is array' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Failed test 'exit_code' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 380. # got: '200' # expected: '0' # Script's stdout: # Script's stderr: <> # Failed test 'stdout_like' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 393. # 'prog3: ERROR 500: Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # ' # doesn't match '(?^:^"a=101\\nb=\\nc=\\nd=\\ne=")' # Looks like you failed 2 tests of 2. # Failed test 'can also set common option' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426. # Looks like you failed 13 tests of 14. # Failed test 'config file' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493. # there are failing tests, not deleting tempdir /tmp/B3geXLIRi6 # Looks like you failed 17 tests of 18. t/suite.t ................ # Subtest: help action ok 1 - dummy # Subtest: --help # Generated CLI script at /tmp/B3geXLIRi6/cliR6lVka3s # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliR6lVka3s', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--help' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - --help # Subtest: + is not accepted as option starter # Generated CLI script at /tmp/B3geXLIRi6/cliUZxpRjQC # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliUZxpRjQC', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '+h' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - + is not accepted as option starter # Subtest: + is not accepted as option starter (2) # Generated CLI script at /tmp/B3geXLIRi6/clihsgMN_3j # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clihsgMN_3j', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '+help' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - + is not accepted as option starter (2) # Subtest: extra args is okay # Generated CLI script at /tmp/B3geXLIRi6/cliBabuuOyj # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliBabuuOyj', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--help', # '1', # '2', # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - extra args is okay # Subtest: help for cli with subcommands # Generated CLI script at /tmp/B3geXLIRi6/cli9sEzH0FH # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli9sEzH0FH', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'sc1' => '/Perinci/Examples/Tiny/noop' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # '--help' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - help for cli with subcommands # Subtest: help on a subcommand # Generated CLI script at /tmp/B3geXLIRi6/cliBMjuSwDI # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliBMjuSwDI', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'sc1' => '/Perinci/Examples/Tiny/noop' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # 'sc1', # '--help' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like ok 3 - stdout_unlike 1..3 not ok 7 - help on a subcommand 1..7 not ok 1 - help action # Subtest: version action ok 1 - dummy # Subtest: --version # Generated CLI script at /tmp/B3geXLIRi6/cliQJ5DIuwS # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliQJ5DIuwS', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--version' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - --version 1..2 not ok 2 - version action # Subtest: subcommands action ok 1 - dummy # Subtest: --subcommands # Generated CLI script at /tmp/B3geXLIRi6/cliHL7hlDfa # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliHL7hlDfa', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'noop' => '/Perinci/Examples/Tiny/noop', # 'odd_even' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # '--subcommands' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - --subcommands # Subtest: unknown subcommand = error # Generated CLI script at /tmp/B3geXLIRi6/clizxWpJ_QZ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clizxWpJ_QZ', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'noop' => '/Perinci/Examples/Tiny/noop', # 'odd_even' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # 'foo' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - unknown subcommand = error # Subtest: default_subcommand # Generated CLI script at /tmp/B3geXLIRi6/cliYL6j6ZKI # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'default_subcommand' => 'noop', # 'output_file' => '/tmp/B3geXLIRi6/cliYL6j6ZKI', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'noop' => '/Perinci/Examples/Tiny/noop', # 'odd_even' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - default_subcommand # Subtest: default_subcommand 2 # Generated CLI script at /tmp/B3geXLIRi6/cliQcUqT93I # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'default_subcommand' => 'odd_even', # 'output_file' => '/tmp/B3geXLIRi6/cliQcUqT93I', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'noop' => '/Perinci/Examples/Tiny/noop', # 'odd_even' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 5 - default_subcommand 2 1..5 not ok 3 - subcommands action # Subtest: call action ok 1 - dummy # Subtest: embedded function+meta works # Generated CLI script at /tmp/B3geXLIRi6/cliH14BjDbQ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'code_before_instantiate_cmdline' => ' # our %SPEC; # $SPEC{square} = {v=>1.1, args=>{num=>{schema=>\'num*\', req=>1, pos=>0}}}; # sub square { my %args=@_; [200, "OK", $args{num}**2] } # ', # 'output_file' => '/tmp/B3geXLIRi6/cliH14BjDbQ', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/main/square' # } # argv: [ # '12' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - embedded function+meta works # Subtest: extra args not allowed # Generated CLI script at /tmp/B3geXLIRi6/cliyXEADbCk # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliyXEADbCk', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '1' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - extra args not allowed # Subtest: missing required args -> error # Generated CLI script at /tmp/B3geXLIRi6/cli7yc0L2vN # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli7yc0L2vN', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/odd_even' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 4 - missing required args -> error # Subtest: common option: --format # Generated CLI script at /tmp/B3geXLIRi6/cliNpisdKvu # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliNpisdKvu', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--format', # 'json' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - common option: --format # Subtest: common option: --json # Generated CLI script at /tmp/B3geXLIRi6/cliFgglnYxK # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliFgglnYxK', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--json' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - common option: --json # Subtest: common option: --naked-res # Generated CLI script at /tmp/B3geXLIRi6/cliGsPOvkfH # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliGsPOvkfH', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--json', # '--naked-res' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 7 - common option: --naked-res # Subtest: common option: --no-naked-res # Generated CLI script at /tmp/B3geXLIRi6/clitXmgEtyX # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clitXmgEtyX', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg', # 'abc', # '--json', # '--no-naked-res' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 8 - common option: --no-naked-res # Subtest: common option: --cmd # Generated CLI script at /tmp/B3geXLIRi6/clirch_UjNa # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'default_subcommand' => 'noop', # 'output_file' => '/tmp/B3geXLIRi6/clirch_UjNa', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'noop' => '/Perinci/Examples/Tiny/noop', # 'odd_even' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [ # '--cmd', # 'odd_even', # '5' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 9 - common option: --cmd # Subtest: json argument # Generated CLI script at /tmp/B3geXLIRi6/cliUNa6Yxot # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliUNa6Yxot', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/Args/as_is' # } # argv: [ # '--arg-json', # '["a","b"]', # '--json' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 10 - json argument # Subtest: can handle function which returns naked result # Generated CLI script at /tmp/B3geXLIRi6/cliXk_xJSkY # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliXk_xJSkY', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/hello_naked' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 11 - can handle function which returns naked result 1..11 not ok 4 - call action # Subtest: cmdline_src (error cases) ok 1 - dummy # Subtest: unknown value # Generated CLI script at /tmp/B3geXLIRi6/cli_lPFEx7i # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli_lPFEx7i', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_unknown' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 2 - unknown value # Subtest: arg type not str/array # Generated CLI script at /tmp/B3geXLIRi6/clitVO5WKHQ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clitVO5WKHQ', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_invalid_arg_type' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 3 - arg type not str/array # Subtest: multiple stdin # Generated CLI script at /tmp/B3geXLIRi6/clizQ0OOM9R # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clizQ0OOM9R', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_multi_stdin' # } # argv: [ # 'a', # 'b' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - multiple stdin 1..4 not ok 5 - cmdline_src (error cases) # Subtest: cmdline_src (file) ok 1 - dummy # Subtest: file 1 # Generated CLI script at /tmp/B3geXLIRi6/clifSEL2Irc # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clifSEL2Irc', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a1', # '/tmp/B3geXLIRi6/infile1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - file 1 # Subtest: file 1 (special hint arguments passed) # Generated CLI script at /tmp/B3geXLIRi6/cli7wG_fYEB # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli7wG_fYEB', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--json', # '--a1', # '/tmp/B3geXLIRi6/infile1' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like not ok 3 - stdout_like 1..3 not ok 3 - file 1 (special hint arguments passed) # Subtest: file 2 # Generated CLI script at /tmp/B3geXLIRi6/cliPeWCFpUd # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliPeWCFpUd', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a1', # '/tmp/B3geXLIRi6/infile1', # '--a2', # '/tmp/B3geXLIRi6/infile2' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - file 2 # Subtest: file 2 (special hint arguments passed) # Generated CLI script at /tmp/B3geXLIRi6/cli3TP7nwaj # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli3TP7nwaj', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--json', # '--a1', # '/tmp/B3geXLIRi6/infile1', # '--a2', # '/tmp/B3geXLIRi6/infile2' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like not ok 3 - stdout_like not ok 4 - stdout_like not ok 5 - stdout_like 1..5 not ok 5 - file 2 (special hint arguments passed) # Subtest: file not found # Generated CLI script at /tmp/B3geXLIRi6/cliMheglYqK # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliMheglYqK', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a1', # '/tmp/B3geXLIRi6/infile1/x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 6 - file not found # Subtest: file, missing required arg # Generated CLI script at /tmp/B3geXLIRi6/cliA3dpXK9m # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliA3dpXK9m', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_file' # } # argv: [ # '--a2', # '/tmp/B3geXLIRi6/infile2' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 7 - file, missing required arg 1..7 not ok 6 - cmdline_src (file) # Subtest: cmdline_src (stdin) ok 1 - dummy # Subtest: stdin str # Generated CLI script at /tmp/B3geXLIRi6/cliowmsUUWq # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliowmsUUWq', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - stdin str # Subtest: stdin str (special hint arguments passed) # Generated CLI script at /tmp/B3geXLIRi6/cliquYb6nab # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliquYb6nab', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [ # '--json' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - stdin str (special hint arguments passed) # Subtest: stdin array # Generated CLI script at /tmp/B3geXLIRi6/cliGk9E216w # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliGk9E216w', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_array' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - stdin array # Subtest: stdin + arg set to "-" # Generated CLI script at /tmp/B3geXLIRi6/cliEY354Cr9 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliEY354Cr9', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [ # '--a1', # '-' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - stdin + arg set to "-" # Subtest: stdin + arg set to non "-" # Generated CLI script at /tmp/B3geXLIRi6/cli4W5s1Del # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli4W5s1Del', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_str' # } # argv: [ # '--a1', # 'x' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 6 - stdin + arg set to non "-" 1..6 not ok 7 - cmdline_src (stdin) # Subtest: cmdline_src (stdin_line) ok 1 - dummy # Subtest: stdin_line + from stdin # Generated CLI script at /tmp/B3geXLIRi6/cli60nAdGXI # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli60nAdGXI', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line' # } # argv: [ # '--a2', # 'bar' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - stdin_line + from stdin # Subtest: stdin_line + from stdin (special hint arguments passed) # Generated CLI script at /tmp/B3geXLIRi6/cliynhZXL8x # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliynhZXL8x', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line' # } # argv: [ # '--json', # '--a2', # 'bar' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - stdin_line + from stdin (special hint arguments passed) # Subtest: stdin_line + from cmdline # Generated CLI script at /tmp/B3geXLIRi6/clid143lt_1 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clid143lt_1', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_line' # } # argv: [ # '--a2', # 'bar', # '--a1', # 'qux' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - stdin_line + from cmdline # Subtest: multi stdin_line # Generated CLI script at /tmp/B3geXLIRi6/cliFn7BKFgk # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliFn7BKFgk', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_multi_stdin_line' # } # argv: [ # '--a3', # 'baz' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - multi stdin_line 1..5 not ok 8 - cmdline_src (stdin_line) # Subtest: cmdline_src (stdin_or_file) ok 1 - dummy # Subtest: stdin_or_file file # Generated CLI script at /tmp/B3geXLIRi6/clilMb_GrHX # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clilMb_GrHX', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '/tmp/B3geXLIRi6/infile1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - stdin_or_file file # Subtest: stdin_or_file file (extra argument) # Generated CLI script at /tmp/B3geXLIRi6/cliLLtptL9T # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliLLtptL9T', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '/tmp/B3geXLIRi6/infile1', # '/tmp/B3geXLIRi6/infile1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - stdin_or_file file (extra argument) # Subtest: stdin_or_file file (special hint arguments passed) # Generated CLI script at /tmp/B3geXLIRi6/clizVBREUhZ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clizVBREUhZ', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '--json', # '/tmp/B3geXLIRi6/infile1' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like not ok 3 - stdout_like 1..3 not ok 4 - stdin_or_file file (special hint arguments passed) # Subtest: stdin_or_files file not found # Generated CLI script at /tmp/B3geXLIRi6/cliZjzqv_xh # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliZjzqv_xh', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [ # '/tmp/B3geXLIRi6/infile1/x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 5 - stdin_or_files file not found # Subtest: stdin_or_file stdin str # Generated CLI script at /tmp/B3geXLIRi6/clipAlO7bRP # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clipAlO7bRP', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_str' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - stdin_or_file stdin str # Subtest: stdin_or_file stdin str # Generated CLI script at /tmp/B3geXLIRi6/cli1vPRvlEq # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli1vPRvlEq', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_file_array' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 7 - stdin_or_file stdin str 1..7 not ok 9 - cmdline_src (stdin_or_file) # Subtest: cmdline_src (stdin_or_files) ok 1 - dummy # Subtest: stdin_or_files file # Generated CLI script at /tmp/B3geXLIRi6/cligmlNOnBY # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cligmlNOnBY', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_array' # } # argv: [ # '/tmp/B3geXLIRi6/infile1', # '/tmp/B3geXLIRi6/infile2' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - stdin_or_files file # Subtest: stdin_or_files file (special hint arguments passed) # Generated CLI script at /tmp/B3geXLIRi6/cliXdIhMXAs # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliXdIhMXAs', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str' # } # argv: [ # '--json', # '/tmp/B3geXLIRi6/infile1' # ] # Script's stdout: <[500,"Died: Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.70-xf4Rv1/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144.",null,{"stream":0}] # > # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like not ok 3 - stdout_like 1..3 not ok 3 - stdin_or_files file (special hint arguments passed) # Subtest: stdin_or_files file not found # Generated CLI script at /tmp/B3geXLIRi6/cli5cSasIFv # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli5cSasIFv', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str' # } # argv: [ # '/tmp/B3geXLIRi6/infile1/x' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - stdin_or_files file not found # Subtest: stdin_or_files stdin str # Generated CLI script at /tmp/B3geXLIRi6/cli4oG3J1Qg # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli4oG3J1Qg', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_str' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - stdin_or_files stdin str # Subtest: stdin_or_files stdin str # Generated CLI script at /tmp/B3geXLIRi6/cliPC4RaVQm # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliPC4RaVQm', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_files_array' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - stdin_or_files stdin str 1..6 not ok 10 - cmdline_src (stdin_or_files) # Subtest: cmdline_src (stdin_or_args) ok 1 - dummy # Subtest: from arg # Generated CLI script at /tmp/B3geXLIRi6/cli2P7Z3xX4 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli2P7Z3xX4', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_args_array' # } # argv: [ # '--a1', # 'x' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - from arg # Subtest: from stdin # Generated CLI script at /tmp/B3geXLIRi6/cli1J6EJ4CK # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli1J6EJ4CK', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineSrc/cmdline_src_stdin_or_args_array' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - from stdin 1..3 not ok 11 - cmdline_src (stdin_or_args) # Subtest: dry-run ok 1 - dummy # Subtest: dry-run (via env, 0) # Generated CLI script at /tmp/B3geXLIRi6/clihyDr5TPP # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clihyDr5TPP', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/test_dry_run' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - dry-run (via env, 0) # Subtest: dry-run (via env, 1) # Generated CLI script at /tmp/B3geXLIRi6/cliHcKWyCFD # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliHcKWyCFD', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/test_dry_run' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - dry-run (via env, 1) # Subtest: dry-run (via cmdline opt) # Generated CLI script at /tmp/B3geXLIRi6/cliH0P2tXVd # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliH0P2tXVd', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/test_dry_run' # } # argv: [ # '--dry-run' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - dry-run (via cmdline opt) 1..4 not ok 12 - dry-run # Subtest: tx ok 1 - dummy # Subtest: dry_run (using tx) (w/o) 1..0 # SKIP Has one of the exclude_tag: tx ok 2 # skip Has one of the exclude_tag: tx # Subtest: dry_run (using tx) (w/) 1..0 # SKIP Has one of the exclude_tag: tx ok 3 # skip Has one of the exclude_tag: tx 1..3 ok 13 - tx # Subtest: streaming ok 1 - dummy # Subtest: stream input, simple type, chomp on # Generated CLI script at /tmp/B3geXLIRi6/clidn8MHh5O # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clidn8MHh5O', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/count_lines' # } # argv: [ # '/tmp/B3geXLIRi6/infile-str' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - stream input, simple type, chomp on # Subtest: stream input, simple type, chomp off # Generated CLI script at /tmp/B3geXLIRi6/cliTFtB0X_u # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliTFtB0X_u', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/wc' # } # argv: [ # '/tmp/B3geXLIRi6/infile-str' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - stream input, simple type, chomp off # Subtest: stream input, json stream # Generated CLI script at /tmp/B3geXLIRi6/clirj7fqOIR # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clirj7fqOIR', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/wc_keys' # } # argv: [ # '/tmp/B3geXLIRi6/infile-hash-json' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - stream input, json stream # Subtest: stream input, simple type, word validation 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 5 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream input, simple types, word validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 6 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream input, simple types, word validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 7 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream input, json stream, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 8 # skip Has one of the exclude_tag: validate-streaming-input # Subtest: stream result, simple types, word validation 1..0 # SKIP Has one of the exclude_tag: validate-streaming-result ok 9 # skip Has one of the exclude_tag: validate-streaming-result # Subtest: stream result, simple types, word validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-result ok 10 # skip Has one of the exclude_tag: validate-streaming-result # Subtest: stream result, json stream # Generated CLI script at /tmp/B3geXLIRi6/clijXafNw41 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clijXafNw41', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/produce_hashes' # } # argv: [ # '-n', # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 11 - stream result, json stream # Subtest: stream input+result, simple type, float validation # Generated CLI script at /tmp/B3geXLIRi6/cliZwToxUy0 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliZwToxUy0', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Stream/square_nums' # } # argv: [ # '/tmp/B3geXLIRi6/infile-int' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 12 - stream input+result, simple type, float validation # Subtest: stream input+result, simple type, float validation, error 1..0 # SKIP Has one of the exclude_tag: validate-streaming-input ok 13 # skip Has one of the exclude_tag: validate-streaming-input 1..13 not ok 14 - streaming # Subtest: result metadata ok 1 - dummy # Subtest: cmdline.exit_code # Generated CLI script at /tmp/B3geXLIRi6/cliGW_U7QBp # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliGW_U7QBp', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/exit_code' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 2 - cmdline.exit_code # Subtest: cmdline.result # Generated CLI script at /tmp/B3geXLIRi6/clirZOoL2qp # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clirZOoL2qp', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/result' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - cmdline.result # Subtest: cmdline.default_format # Generated CLI script at /tmp/B3geXLIRi6/cliueH8vpSv # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliueH8vpSv', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/default_format' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - cmdline.default_format # Subtest: cmdline.default_format (overriden by cmdline opt) # Generated CLI script at /tmp/B3geXLIRi6/cliyX7MVobz # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliyX7MVobz', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/default_format' # } # argv: [ # '--format', # 'text' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - cmdline.default_format (overriden by cmdline opt) # Subtest: cmdline.skip_format # Generated CLI script at /tmp/B3geXLIRi6/clinF_SBkl8 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clinF_SBkl8', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/CmdLineResMeta/skip_format' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - cmdline.skip_format 1..6 not ok 15 - result metadata # Subtest: completion ok 1 - dummy # Subtest: self-completion works # Generated CLI script at /tmp/B3geXLIRi6/cliyU6ZxJGv # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliyU6ZxJGv', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/odd_even' # } # argv: [] # Script's stdout: <> # Script's stderr: not ok 1 - exit_code not ok 2 - answer 1..2 not ok 2 - self-completion works # Subtest: completion of subcommand name # Generated CLI script at /tmp/B3geXLIRi6/cli5MCOEkV_ # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cli5MCOEkV_', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'sc1' => '/Perinci/Examples/Tiny/noop', # 'sc2' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: <> # Script's stderr: not ok 1 - exit_code not ok 2 - answer 1..2 not ok 3 - completion of subcommand name # Subtest: completion of subcommand option # Generated CLI script at /tmp/B3geXLIRi6/clids1P7zZO # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clids1P7zZO', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'subcommands' => { # 'sc1' => '/Perinci/Examples/Tiny/noop', # 'sc2' => '/Perinci/Examples/Tiny/odd_even' # }, # 'url' => '/Perinci/Examples/Tiny/' # } # argv: [] # Script's stdout: <> # Script's stderr: not ok 1 - exit_code not ok 2 - answer 1..2 not ok 4 - completion of subcommand option 1..4 not ok 16 - completion # Subtest: env ok 1 - dummy # Subtest: env read # Generated CLI script at /tmp/B3geXLIRi6/cliwvWi8bb1 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliwvWi8bb1', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 1, # 'script_name' => 'sum-nums', # 'url' => '/Perinci/Examples/sum' # } # argv: [ # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - env read # Subtest: turned off via --no-env # Generated CLI script at /tmp/B3geXLIRi6/cliyAOpNyii # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/cliyAOpNyii', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 1, # 'script_name' => 'sum-nums', # 'url' => '/Perinci/Examples/sum' # } # argv: [ # '--no-env', # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - turned off via --no-env # Subtest: attr:env_name # Generated CLI script at /tmp/B3geXLIRi6/cli_DTzDfR7 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'env_name' => 'foo_opt', # 'output_file' => '/tmp/B3geXLIRi6/cli_DTzDfR7', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 1, # 'script_name' => 'sum-nums', # 'url' => '/Perinci/Examples/sum' # } # argv: [ # '3' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - attr:env_name 1..4 not ok 17 - env # Subtest: config file ok 1 - dummy # Subtest: attr:config_dirs # Generated CLI script at /tmp/B3geXLIRi6/cli2HTUSC1e # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/cli2HTUSC1e', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 2 - attr:config_dirs # Subtest: attr:config_filename # Generated CLI script at /tmp/B3geXLIRi6/clijxQbSjeF # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'config_filename' => 'prog2.conf', # 'output_file' => '/tmp/B3geXLIRi6/clijxQbSjeF', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 3 - attr:config_filename # Subtest: attr:config_filename (hash record) # Generated CLI script at /tmp/B3geXLIRi6/cliAAOLLcKy # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'config_filename' => [ # { # 'filename' => 'prog4.conf', # 'section' => 'prog' # }, # 'prog2.conf' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliAAOLLcKy', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 4 - attr:config_filename (hash record) # Subtest: attr:config_filename (hash record) + --config-profile # Generated CLI script at /tmp/B3geXLIRi6/cliz4qQsh_m # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'config_filename' => [ # { # 'filename' => 'prog4.conf', # 'section' => 'prog' # }, # 'prog2.conf' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliz4qQsh_m', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile', # 'profile1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 5 - attr:config_filename (hash record) + --config-profile # Subtest: common option: --no-config # Generated CLI script at /tmp/B3geXLIRi6/clidnoKIa8M # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/clidnoKIa8M', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--no-config' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 6 - common option: --no-config # Subtest: common option: --config-path # Generated CLI script at /tmp/B3geXLIRi6/clixRhSi0Mt # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/tmp/B3geXLIRi6/clixRhSi0Mt', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-path', # '/tmp/B3geXLIRi6/prog.conf' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 7 - common option: --config-path # Subtest: common option: --config-profile # Generated CLI script at /tmp/B3geXLIRi6/cliHXbJhskU # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliHXbJhskU', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile=profile1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 8 - common option: --config-profile # Subtest: unknown config profile -> error # Generated CLI script at /tmp/B3geXLIRi6/cliAyPWWb_U # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliAyPWWb_U', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile=foo' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code 1..1 not ok 9 - unknown config profile -> error # Subtest: unknown config profile but does not read config -> ok # Generated CLI script at /tmp/B3geXLIRi6/clivqBkk986 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/clivqBkk986', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'foo', # 'url' => '/Perinci/Examples/noop2' # } # argv: [ # '--config-profile=bar' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 10 - unknown config profile but does not read config -> ok # Subtest: subcommand # Generated CLI script at /tmp/B3geXLIRi6/cliNQd0q01K # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliNQd0q01K', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'subcommands' => { # 'subcommand1' => '/Perinci/Examples/noop2' # }, # 'url' => '/Perinci/Examples/' # } # argv: [ # 'subcommand1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 11 - subcommand # Subtest: subcommand + --config-profile # Generated CLI script at /tmp/B3geXLIRi6/cliGrjpMH6Z # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliGrjpMH6Z', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog', # 'subcommands' => { # 'subcommand1' => '/Perinci/Examples/noop2' # }, # 'url' => '/Perinci/Examples/' # } # argv: [ # '--config-profile=profile1', # 'subcommand1' # ] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 12 - subcommand + --config-profile # Subtest: array-ify if argument is array # Generated CLI script at /tmp/B3geXLIRi6/cliKkJxLWoE # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/cliKkJxLWoE', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'sum', # 'url' => '/Perinci/Examples/sum' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 13 - array-ify if argument is array # Subtest: can also set common option # Generated CLI script at /tmp/B3geXLIRi6/clipu43dE1Y # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'config_dirs' => [ # '/tmp/B3geXLIRi6' # ], # 'output_file' => '/tmp/B3geXLIRi6/clipu43dE1Y', # 'overwrite' => 1, # 'read_config' => 1, # 'read_env' => 0, # 'script_name' => 'prog3', # 'url' => '/Perinci/Examples/noop2' # } # argv: [] # Script's stdout: # Script's stderr: <> not ok 1 - exit_code not ok 2 - stdout_like 1..2 not ok 14 - can also set common option 1..14 not ok 18 - config file 1..18 Dubious, test returned 17 (wstat 4352, 0x1100) Failed 17/18 subtests Test Summary Report ------------------- t/suite.t (Wstat: 4352 Tests: 18 Failed: 17) Failed tests: 1-12, 14-18 Non-zero exit status: 17 Files=4, Tests=20, 8 wallclock secs ( 0.10 usr 0.02 sys + 3.79 cusr 0.86 csys = 4.77 CPU) Result: FAIL Failed 1/4 test programs. 17/20 subtests failed. make: *** [test_dynamic] Error 17 PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz one dependency not OK (Progress::Any::Output::TermProgressBarColor); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Any-0.13-6quQ2K PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz Warning: Prerequisite 'Perinci::CmdLine::Lite => 1.56' for 'PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz' failed when processing 'PERLANCAR/Perinci-CmdLine-Lite-1.70.tar.gz' with 'make_test => NO one dependency not OK (Progress::Any::Output::TermProgressBarColor); additionally test harness failed'. Continuing, but chances to succeed are limited. >>> make cp lib/Perinci/CmdLine/Any.pm blib/lib/Perinci/CmdLine/Any.pm Manifying 1 pod document PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..1 ok 1 - Perinci/CmdLine/Any.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author All tests successful. Files=3, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr 0.02 csys = 0.12 CPU) Result: PASS PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz Tests succeeded but one dependency not OK (Perinci::CmdLine::Lite) PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz [dependencies] -- NA PERLANCAR/App-ParseCPANChanges-0.06.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/App-ParseCPANChanges-0.06-nNKqxt PERLANCAR/App-ParseCPANChanges-0.06.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/App-ParseCPANChanges-0.06.tar.gz Warning: Prerequisite 'Perinci::CmdLine::Any => 0' for 'PERLANCAR/App-ParseCPANChanges-0.06.tar.gz' failed when processing 'PERLANCAR/Perinci-CmdLine-Any-0.13.tar.gz' with 'make_test => NO one dependency not OK (Perinci::CmdLine::Lite)'. Continuing, but chances to succeed are limited. >>> make cp lib/App/ParseCPANChanges.pm blib/lib/App/ParseCPANChanges.pm cp bin/parse-cpan-changes blib/script/parse-cpan-changes "/Users/fly2200/ap2200-299195/bin/perl-dynamic" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/parse-cpan-changes Manifying 1 pod document Manifying 1 pod document PERLANCAR/App-ParseCPANChanges-0.06.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'bin/parse-cpan-changes compiled ok' # at t/00-compile.t line 65. # got: '512' # expected: '0' Can't locate Perinci/CmdLine/Any.pm in @INC (you may need to install the Perinci::CmdLine::Any module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/App-ParseCPANChanges-0.06-nNKqxt/blib/arch /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/App-ParseCPANChanges-0.06-nNKqxt/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/App-ParseCPANChanges-0.06-nNKqxt/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/App-ParseCPANChanges-0.06-nNKqxt/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at bin/parse-cpan-changes line 14.BEGIN failed--compilation aborted at bin/parse-cpan-changes line 14. at t/00-compile.t line 74, line 2. # Looks like you failed 1 test of 2. t/00-compile.t ............ 1..2 ok 1 - App/ParseCPANChanges.pm loaded ok not ok 2 - bin/parse-cpan-changes compiled ok Dubious, test returned 1 (wstat 256, 0x100) Failed 1/2 subtests t/release-pod-coverage.t .. skipped: these tests are for release candidate testing t/release-pod-syntax.t .... skipped: these tests are for release candidate testing t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/00-compile.t (Wstat: 256 Tests: 2 Failed: 1) Failed test: 2 Non-zero exit status: 1 Files=4, Tests=2, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.09 cusr 0.03 csys = 0.15 CPU) Result: FAIL Failed 1/4 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/App-ParseCPANChanges-0.06.tar.gz one dependency not OK (Perinci::CmdLine::Any); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/App-ParseCPANChanges-0.06.tar.gz Finished 2017-01-12T01:46:20