PATH=/usr/bin:/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin Start 2016-03-01T06:03:46 ActivePerl-2200 CPAN-2.10 Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata' Database was generated on Mon, 29 Feb 2016 06:53:36 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/App-depak-0.52.tar.gz Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-depak-0.52.tar.gz ok App-depak-0.52/ App-depak-0.52/bin/ App-depak-0.52/bin/depak App-depak-0.52/META.json App-depak-0.52/LICENSE App-depak-0.52/Changes App-depak-0.52/META.yml App-depak-0.52/Makefile.PL App-depak-0.52/t/ App-depak-0.52/t/release-pod-syntax.t App-depak-0.52/t/release-pod-coverage.t App-depak-0.52/t/release-rinci.t App-depak-0.52/t/00-compile.t App-depak-0.52/README App-depak-0.52/dist.ini App-depak-0.52/lib/ App-depak-0.52/lib/Perinci/ App-depak-0.52/lib/Perinci/CmdLine/ App-depak-0.52/lib/Perinci/CmdLine/depak.pm App-depak-0.52/lib/App/ App-depak-0.52/lib/App/depak.pm App-depak-0.52/MANIFEST App-depak-0.52/weaver.ini Configuring P/PE/PERLANCAR/App-depak-0.52.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite App::lcpan 0.66 not found. Warning: prerequisite App::tracepm 0.17 not found. Warning: prerequisite Perinci::CmdLine::Lite 0.49 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::depak Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-depak-0.52.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-depak-0.52.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-depak-0.52.tar.gz ---- App::tracepm [requires] Perinci::CmdLine::Lite [requires] App::lcpan [requires] Running test for module 'App::tracepm' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/App-tracepm-0.19.tar.gz ok App-tracepm-0.19/ App-tracepm-0.19/bin/ App-tracepm-0.19/bin/tracepm App-tracepm-0.19/META.json App-tracepm-0.19/LICENSE App-tracepm-0.19/Changes App-tracepm-0.19/META.yml App-tracepm-0.19/Makefile.PL App-tracepm-0.19/t/ App-tracepm-0.19/t/release-pod-syntax.t App-tracepm-0.19/t/release-pod-coverage.t App-tracepm-0.19/t/release-rinci.t App-tracepm-0.19/t/00-compile.t App-tracepm-0.19/README App-tracepm-0.19/dist.ini App-tracepm-0.19/lib/ App-tracepm-0.19/lib/App/ App-tracepm-0.19/lib/App/tracepm/ App-tracepm-0.19/lib/App/tracepm/Tracer.pm App-tracepm-0.19/lib/App/tracepm.pm App-tracepm-0.19/MANIFEST App-tracepm-0.19/weaver.ini Configuring P/PE/PERLANCAR/App-tracepm-0.19.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite CHI 0 not found. Warning: prerequisite Perinci::CmdLine::Any 0 not found. Warning: prerequisite Perl::PrereqScanner::Lite 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for App::tracepm Writing MYMETA.yml and MYMETA.json Modifying Makefile to generate shell completion on install PERLANCAR/App-tracepm-0.19.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/App-tracepm-0.19.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/App-tracepm-0.19.tar.gz ---- CHI [requires] Perl::PrereqScanner::Lite [requires] Perinci::CmdLine::Any [requires] Running test for module 'CHI' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/J/JS/JSWARTZ/CHI-0.60.tar.gz ok CHI-0.60/ CHI-0.60/Changes CHI-0.60/etc/ CHI-0.60/etc/bench/ CHI-0.60/etc/bench/bench.pl CHI-0.60/INSTALL CHI-0.60/lib/ CHI-0.60/lib/CHI/ CHI-0.60/lib/CHI/Benchmarks.pod CHI-0.60/lib/CHI/CacheObject.pm CHI-0.60/lib/CHI/Constants.pm CHI-0.60/lib/CHI/Driver/ CHI-0.60/lib/CHI/Driver/Base/ CHI-0.60/lib/CHI/Driver/Base/CacheContainer.pm CHI-0.60/lib/CHI/Driver/CacheCache.pm CHI-0.60/lib/CHI/Driver/Development.pod CHI-0.60/lib/CHI/Driver/FastMmap.pm CHI-0.60/lib/CHI/Driver/File.pm CHI-0.60/lib/CHI/Driver/Memory.pm CHI-0.60/lib/CHI/Driver/Metacache.pm CHI-0.60/lib/CHI/Driver/Null.pm CHI-0.60/lib/CHI/Driver/RawMemory.pm CHI-0.60/lib/CHI/Driver/Role/ CHI-0.60/lib/CHI/Driver/Role/HasSubcaches.pm CHI-0.60/lib/CHI/Driver/Role/IsSizeAware.pm CHI-0.60/lib/CHI/Driver/Role/IsSubcache.pm CHI-0.60/lib/CHI/Driver/Role/Universal.pm CHI-0.60/lib/CHI/Driver.pm CHI-0.60/lib/CHI/Serializer/ CHI-0.60/lib/CHI/Serializer/JSON.pm CHI-0.60/lib/CHI/Serializer/Storable.pm CHI-0.60/lib/CHI/Stats.pm CHI-0.60/lib/CHI/t/ CHI-0.60/lib/CHI/t/Bugs.pm CHI-0.60/lib/CHI/t/Config.pm CHI-0.60/lib/CHI/t/Constants.pm CHI-0.60/lib/CHI/t/Driver/ CHI-0.60/lib/CHI/t/Driver/CacheCache.pm CHI-0.60/lib/CHI/t/Driver/FastMmap.pm CHI-0.60/lib/CHI/t/Driver/File/ CHI-0.60/lib/CHI/t/Driver/File/DepthZero.pm CHI-0.60/lib/CHI/t/Driver/File.pm CHI-0.60/lib/CHI/t/Driver/Memory.pm CHI-0.60/lib/CHI/t/Driver/NonMoose.pm CHI-0.60/lib/CHI/t/Driver/RawMemory.pm CHI-0.60/lib/CHI/t/Driver/Subcache/ CHI-0.60/lib/CHI/t/Driver/Subcache/l1_cache.pm CHI-0.60/lib/CHI/t/Driver/Subcache/mirror_cache.pm CHI-0.60/lib/CHI/t/Driver/Subcache.pm CHI-0.60/lib/CHI/t/Driver.pm CHI-0.60/lib/CHI/t/GetError.pm CHI-0.60/lib/CHI/t/Initialize.pm CHI-0.60/lib/CHI/t/Null.pm CHI-0.60/lib/CHI/t/RequiredModules.pm CHI-0.60/lib/CHI/t/Sanity.pm CHI-0.60/lib/CHI/t/SetError.pm CHI-0.60/lib/CHI/t/Subcache.pm CHI-0.60/lib/CHI/t/Subclass.pm CHI-0.60/lib/CHI/t/Util.pm CHI-0.60/lib/CHI/Test/ CHI-0.60/lib/CHI/Test/Class.pm CHI-0.60/lib/CHI/Test/Driver/ CHI-0.60/lib/CHI/Test/Driver/NonMoose.pm CHI-0.60/lib/CHI/Test/Driver/Readonly.pm CHI-0.60/lib/CHI/Test/Driver/Role/ CHI-0.60/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm CHI-0.60/lib/CHI/Test/Driver/Writeonly.pm CHI-0.60/lib/CHI/Test/Util.pm CHI-0.60/lib/CHI/Test.pm CHI-0.60/lib/CHI/Types.pm CHI-0.60/lib/CHI/Util.pm CHI-0.60/lib/CHI.pm CHI-0.60/LICENSE CHI-0.60/Makefile.PL CHI-0.60/MANIFEST CHI-0.60/META.json CHI-0.60/META.yml CHI-0.60/perltidy.LOG CHI-0.60/README CHI-0.60/t/ CHI-0.60/t/00-load.t CHI-0.60/t/author-03-pod.t CHI-0.60/t/author-file-driver.t CHI-0.60/t/author-no-data-serializer.t CHI-0.60/t/author-RequiredModules.t CHI-0.60/t/Bugs.t CHI-0.60/t/Config.t CHI-0.60/t/Constants.t CHI-0.60/t/Driver-Memory.t CHI-0.60/t/Driver-RawMemory.t CHI-0.60/t/GetError.t CHI-0.60/t/Initialize.t CHI-0.60/t/permcache/ CHI-0.60/t/permcache/Default/ CHI-0.60/t/permcache/Default/0/ CHI-0.60/t/permcache/Default/0/4/ CHI-0.60/t/permcache/Default/0/4/1.dat CHI-0.60/t/permcache/Default/0/4/empty.dat CHI-0.60/t/permcache/Default/1/ CHI-0.60/t/permcache/Default/1/a/ CHI-0.60/t/permcache/Default/1/a/+20+21+22+23+24+25+26+27+28+29+2a+2b+2c-+2e+2f09+3a+3b+3c=+3e+3f+40AZ+5b+5c+5d+5e_+60az+7b+7c+7d~+f0.dat CHI-0.60/t/permcache/Default/2/ CHI-0.60/t/permcache/Default/2/3/ CHI-0.60/t/permcache/Default/2/3/+0a.dat CHI-0.60/t/permcache/Default/6/ CHI-0.60/t/permcache/Default/6/3/ CHI-0.60/t/permcache/Default/6/3/0.dat CHI-0.60/t/permcache/Default/7/ CHI-0.60/t/permcache/Default/7/7/ CHI-0.60/t/permcache/Default/7/7/+20.dat CHI-0.60/t/permcache/Default/8/ CHI-0.60/t/permcache/Default/8/1/ CHI-0.60/t/permcache/Default/8/1/a.dat CHI-0.60/t/permcache/Default/b/ CHI-0.60/t/permcache/Default/b/6/ CHI-0.60/t/permcache/Default/b/6/medium.dat CHI-0.60/t/release-dependent.t CHI-0.60/t/Sanity.t CHI-0.60/t/set_permcache.pl CHI-0.60/t/SetError.t CHI-0.60/t/smoke-Driver-CacheCache.t CHI-0.60/t/smoke-Driver-FastMmap.t CHI-0.60/t/smoke-Driver-File-DepthZero.t CHI-0.60/t/smoke-Driver-File.t CHI-0.60/t/smoke-Driver-NonMoose.t CHI-0.60/t/smoke-Driver-Subcache-l1_cache.t CHI-0.60/t/smoke-Driver-Subcache-mirror_cache.t CHI-0.60/t/smoke-Null.t CHI-0.60/t/Subcache.t CHI-0.60/t/Subclass.t CHI-0.60/t/Util.t Configuring J/JS/JSWARTZ/CHI-0.60.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for CHI Writing MYMETA.yml and MYMETA.json JSWARTZ/CHI-0.60.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for J/JS/JSWARTZ/CHI-0.60.tar.gz ---- Unsatisfied dependencies detected during ---- ---- JSWARTZ/CHI-0.60.tar.gz ---- Test::Class [build_requires] Running test for module 'Test::Class' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/E/ET/ETHER/Test-Class-0.50.tar.gz ok Test-Class-0.50/ Test-Class-0.50/Changes Test-Class-0.50/MANIFEST Test-Class-0.50/META.json Test-Class-0.50/META.yml Test-Class-0.50/Makefile.PL Test-Class-0.50/README Test-Class-0.50/lib/ Test-Class-0.50/t/ Test-Class-0.50/xt/ Test-Class-0.50/xt/documented.t Test-Class-0.50/xt/meta.t Test-Class-0.50/xt/perlcritic.t Test-Class-0.50/xt/perlcriticrc Test-Class-0.50/xt/pmv.t Test-Class-0.50/xt/pod.t Test-Class-0.50/xt/spelling.t Test-Class-0.50/t/00-load.t Test-Class-0.50/t/20-load-classes.t Test-Class-0.50/t/21-load-subclassed.t Test-Class-0.50/t/TestClassLoadSubclass.pm Test-Class-0.50/t/Tests.t Test-Class-0.50/t/_new.t Test-Class-0.50/t/bad-autoloads.t Test-Class-0.50/t/bailout.t Test-Class-0.50/t/builder.t Test-Class-0.50/t/compile.t Test-Class-0.50/t/current_method.t Test-Class-0.50/t/diag_on_failure.t Test-Class-0.50/t/die-in-setup.t Test-Class-0.50/t/die_before_plan.t Test-Class-0.50/t/expected_tests.t Test-Class-0.50/t/fail1.t Test-Class-0.50/t/fail2.t Test-Class-0.50/t/fail3.t Test-Class-0.50/t/filter.t Test-Class-0.50/t/filter_bad_filter.t Test-Class-0.50/t/filter_fixtures.t Test-Class-0.50/t/filter_fixtures_only.t Test-Class-0.50/t/filter_multiple.t Test-Class-0.50/t/header.t Test-Class-0.50/t/late_header.t Test-Class-0.50/t/methodinfo.t Test-Class-0.50/t/named_test.t Test-Class-0.50/t/num_method_tests.t Test-Class-0.50/t/num_tests.t Test-Class-0.50/t/override.t Test-Class-0.50/t/rt15870.t Test-Class-0.50/t/rt17264.t Test-Class-0.50/t/run_all_tests.t Test-Class-0.50/t/runtests.t Test-Class-0.50/t/runtests_die.t Test-Class-0.50/t/runtests_die_empty.t Test-Class-0.50/t/runtests_die_nearlyempty.t Test-Class-0.50/t/runtests_extra.t Test-Class-0.50/t/runtests_noplan.t Test-Class-0.50/t/runtests_of.t Test-Class-0.50/t/runtests_result.t Test-Class-0.50/t/runtests_return.t Test-Class-0.50/t/runtests_trailing.t Test-Class-0.50/t/runtests_with_wrong_class.t Test-Class-0.50/t/show_plan_in_shutdown.t Test-Class-0.50/t/skip1.t Test-Class-0.50/t/skip2.t Test-Class-0.50/t/skip_class_reason.t Test-Class-0.50/t/skip_empty_classes.t Test-Class-0.50/t/spaces.t Test-Class-0.50/t/startup.t Test-Class-0.50/t/startup_that_dies.t Test-Class-0.50/t/teardown-when-test-dies.t Test-Class-0.50/t/test-libs/ Test-Class-0.50/t/test_classes.t Test-Class-0.50/t/test_deep.t Test-Class-0.50/t/test_method.t Test-Class-0.50/t/test_verbose.t Test-Class-0.50/t/todo.t Test-Class-0.50/t/test-libs/fail/ Test-Class-0.50/t/test-libs/lib1/ Test-Class-0.50/t/test-libs/lib2/ Test-Class-0.50/t/test-libs/lib3/ Test-Class-0.50/t/test-libs/lib3/Tests/ Test-Class-0.50/t/test-libs/lib3/Tests/Bad1.pm Test-Class-0.50/t/test-libs/lib3/Tests/Good1.pm Test-Class-0.50/t/test-libs/lib3/Tests/Good2.pm Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/ Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Bad2.pm Test-Class-0.50/t/test-libs/lib3/Tests/Subdir/Good3.pm Test-Class-0.50/t/test-libs/lib2/MyTest/ Test-Class-0.50/t/test-libs/lib2/MyTest/Baz.pm Test-Class-0.50/t/test-libs/lib1/Tests/ Test-Class-0.50/t/test-libs/lib1/Tests/Foo/ Test-Class-0.50/t/test-libs/lib1/Tests/Foo.pm Test-Class-0.50/t/test-libs/lib1/Tests/Foo/Bar.pm Test-Class-0.50/t/test-libs/fail/MyFail.pm Test-Class-0.50/lib/Test/ Test-Class-0.50/lib/Test/Class/ Test-Class-0.50/lib/Test/Class.pm Test-Class-0.50/lib/Test/Class/Load.pm Test-Class-0.50/lib/Test/Class/MethodInfo.pm Configuring E/ET/ETHER/Test-Class-0.50.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Test::Class Writing MYMETA.yml and MYMETA.json ETHER/Test-Class-0.50.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for E/ET/ETHER/Test-Class-0.50.tar.gz >>> make cp lib/Test/Class/MethodInfo.pm blib/lib/Test/Class/MethodInfo.pm cp lib/Test/Class/Load.pm blib/lib/Test/Class/Load.pm cp lib/Test/Class.pm blib/lib/Test/Class.pm Manifying 3 pod documents ETHER/Test-Class-0.50.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Test::Class::Load 0.50, Perl 5.022000, /Users/fly2200/ap2200-299195/bin/perl-dynamic t/00-load.t .................... 1..1 ok 1 - use Test::Class::Load; ok t/20-load-classes.t ............ 1..14 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should tests in subdirectories ok 3 - ... and the methods should work correctly ok 4 - ... even if they are called from subclasses ok 5 - ... or they have their own methods ok 6 - Trying to load multiple lib paths should succeed ok 7 - Top level directories should be loaded even with multiple libs ok 8 - ... as should tests in subdirectories ok 9 - ... and the methods should work correctly ok 10 - ... even if they are called from subclasses ok 11 - ... or they have their own methods ok 12 - And secondary libs should be loaded ok 13 - ... and their methods should also work correctly ok 14 - Trying to load a bad module fails ok t/21-load-subclassed.t ......... 1..7 ok 1 - Classes in top level directories should be loaded ok 2 - ... as should classes in subdirectories ok 3 - Filtered out classes in top level directories should *not* be loaded ok 4 - Filtered out classes in subdirectories should *not* be loaded ok 5 - Class Tests::Good1 method work as expected ok 6 - Class Tests::Good2 method work as expected ok 7 - Class Tests::Subdir::Good3 method work as expected ok t/_new.t ....................... 1..6 ok 1 - use Test::Class; ok 2 - An object of class 'Foo' isa 'Test::Class' ok 3 - key/value set ok 4 - An object of class 'Foo' isa 'Test::Class' ok 5 - prototype key/value set ok 6 - new key/value set ok t/bad-autoloads.t .............. 1..2 ok 1 - use Test::Class; ok 2 - avoided warnings from Contextual::Return::Value ok t/bailout.t .................... 1..2 ok 1 - bailout works ok 2 - exit value okay ok t/builder.t .................... 1..1 ok 1 - builder ok t/compile.t .................... 1..2 ok 1 - cannot test anon sub ok 2 - bad number detected ok # # Local::Test->test t/current_method.t ............. 1..4 ok 1 - current_method in setup ok 2 - current_method in method ok 3 - current_method in teardown ok 4 - current_test outside runtests ok t/diag_on_failure.t ............ 1..1 ok 1 - we show the test class and method name on test failure ok t/die-in-setup.t ............... 1..1 ok 1 - die in setup caused test method to fail ok t/die_before_plan.t ............ 1..1 ok 1 - die before plan ok t/expected_tests.t ............. 1..10 ok 1 - all set ok 2 - no_plan setup ok 3 - no_plan test ok 4 - no_plan teardown ok 5 - no_plan startup ok 6 - no_plan shutdown ok 7 - expected_test_of ok 8 - no_plan expected_test_of ok 9 - bad test class ok 10 - undef test class ok t/fail1.t ...................... 1..2 ok 1 - FAIL_ALL with plan ok 2 - exit value okay ok t/fail2.t ...................... 1..2 ok 1 - fail2 ok 2 - exit value okay ok t/fail3.t ...................... ok 1 - FAIL_ALL with no plan ok 2 - exit value okay 1..2 ok # # Foo->test_run t/filter.t ..................... 1..1 ok 1 - test_run not filtered, so is run ok t/filter_bad_filter.t .......... 1..1 ok 1 - error on non-coderef filter ok # # Foo->test_should_run t/filter_fixtures.t ............ 1..5 ok 1 - startup test is run, even though matches filter ok 2 - setup test is run, even though matches filter ok 3 - should run, due to not matching filter ok 4 - teardown test is run, even though matches filter ok 5 - shutdown test is run, even though matches filter ok t/filter_fixtures_only.t ....... 1..1 ok 1 - setup/teardown not run when no test methods ok # # Foo->test_another_not_matching # # Foo->test_not_filtered t/filter_multiple.t ............ 1..2 ok 1 - test_another_not_matching doesn't meet any filters, so is run ok 2 - test_not_filtered doesn't meet any filters, so is run ok t/header.t ..................... ok 1 - no duplicate headers 1..1 ok # # Local::Test->test t/late_header.t ................ 1..2 ok 1 - test number set ok 2 - builder expected tests set ok t/methodinfo.t ................. ok 1 - use Test::Class::MethodInfo; ok 2 - An object of class 'Test::Class::MethodInfo' isa 'Test::Class::MethodInfo' ok 3 - method type is test by default ok 4 - test methods default to 1 test 1..4 ok t/named_test.t ................. ok 1 - test names set to method name by default 1..1 ok # # Bar->no_plan_test # # Bar->no_plan_test2 # # Bar->two_tests t/num_method_tests.t ........... 1..19 ok 1 - fixed num tests ok 2 - no_plan tests ok 3 - cannot use non-method ok 4 - cannot update illegal value ok 5 - updated legal value ok 6 - update worked ok 7 - updated extended ok 8 - update worked ok 9 - extended method okay ok 10 - class expected_tests ok 11 - object expected_tests ok 12 - num_method_tests dies outside test class ok 13 - just passing ok 14 - no_plan_test just passing 1 ok 15 - no_plan_test just passing 2 ok 16 - no_plan_test2 just passing 1 ok 17 - no_plan_test2 just passing 2 ok 18 - two_tests just passing 1 ok 19 - two_tests just passing 2 ok # # Foo->test_num_tests # # Foo->test_num_tests t/num_tests.t .................. 1..4 ok 1 - num_tests access okay ok 2 - num_tests set okay ok 3 - num_tests access okay ok 4 - num_tests set okay ok t/override.t ................... 1..1 ok 1 - cannot override a public method with a test method ok t/rt15870.t .................... 1..1 ok 1 - sensible error if new() is overridden ok t/rt17264.t .................... 1..1 ok 1 - we figured out that we loaded Test::Class too late ok # # A::Test->setup t/run_all_tests.t .............. 1..5 ok 1 - Test::Class->SKIP_CLASS default ok 2 - Base::Test->SKIP_CLASS overridden ok 3 - A::Test->SKIP_CLASS default ok 4 - non skipping test class run as expected ok 5 - runtests skipped classes with SKIP_CLASS set ok # # Bar->test1 # # Bar->test2 t/runtests.t ................... 1..18 ok 1 - initialise2: methods ran in order ok 2 - test1: initialise1 ran once ok 3 - test1: initialise2 ran once ok 4 - test1: first test running ok 5 - test1: teardown not run ok 6 - teardown1: teardown run for every test ok 7 - teardown1: teardown run for every initialise1 ok 8 - teardown1: teardown run for every initialise2 ok 9 - teardown1: setup run for every test ok 10 - initialise2: methods ran in order ok 11 - test2: initialise1 ran twice ok 12 - test2: initialise2 ran twice ok 13 - test2: second test running ok 14 - test2: teardown ran once ok 15 - teardown1: teardown run for every test ok 16 - teardown1: teardown run for every initialise1 ok 17 - teardown1: teardown run for every initialise2 ok 18 - teardown1: setup run for every test ok t/runtests_die.t ............... 1..1 ok 1 - early die handled ok t/runtests_die_empty.t ......... 1..1 ok 1 - we can handle an exception that stringifies to the empty string ok t/runtests_die_nearlyempty.t ... 1..1 ok 1 - early die with nearly-empty messages handled ok t/runtests_extra.t ............. 1..1 ok 1 - extra test detected ok # # Foo->set_tests # # Foo->undef_tests t/runtests_noplan.t ............ ok 1 - this should pass ok 2 - runtime test 1 ok 3 - runtime test 2 ok 4 - expected number of tests ran 1..4 ok # # Tests1->test # # Tests2->test t/runtests_of.t ................ 1..3 ok 1 - Tests1 test ok 2 - Tests2 test ok 3 - correct number of tests ok t/runtests_result.t ............ 1..4 ok 1 - single failure ran okay ok 2 - failure detected ok 3 - a successful test ok 4 - success detected ok t/runtests_return.t ............ 1..2 ok 1 - early return handled (skip) ok 2 - early return handled (fail) ok t/runtests_trailing.t .......... 1..1 ok 1 - trailing expection detected ok t/runtests_with_wrong_class.t .. 1..2 ok 1 - use Test::Class; ok 2 - runtests dies if we are given something that is not a test class ok # # My::Test->test t/show_plan_in_shutdown.t ...... 1..2 ok 1 - passing test to force shutdown method to run ok 2 - shutdown method has run ok t/skip1.t ...................... 1..1 ok 1 - SKIP_ALL called skip_all ok # Failed test 'SKIP_ALL' # at t/skip2.t line 40. # (in Local::Test->_only) # STDERR is: # # # # Local::Test->test # # not: # # as expected t/skip2.t ...................... 1..4 not ok 1 - SKIP_ALL ok 2 - exit ok ok 3 - make the plan happy ok 4 - make the plan happy Failed 1/4 subtests t/skip_class_reason.t .......... 1..3 # Running under perl version 5.022000 for darwin # Current time local: Tue Mar 1 06:03:54 2016 # Current time GMT: Tue Mar 1 14:03:54 2016 # Using Test.pm version 1.26 ok 1 ok 2 ok 3 ok # # Bar::Test->the_test t/skip_empty_classes.t ......... 1..5 ok 1 - startup run ok 2 - setup run ok 3 - the_test has been run ok 4 - teardown run ok 5 - shutdown run ok t/spaces.t ..................... ok 1 - can have spaces around attributes 1..1 ok # # Foo::Test->test1 # # Foo::Test->test2 t/startup.t .................... 1..15 ok 1 - called start1 ok 2 - called start2 ok 3 - called setup1 ok 4 - called setup2 ok 5 - called test1 ok 6 - called tear1 ok 7 - called tear2 ok 8 - called setup1 ok 9 - called setup2 ok 10 - called test2 ok 11 - called tear1 ok 12 - called tear2 ok 13 - called end1 ok 14 - called end2 ok 15 - all expected methods ran ok t/startup_that_dies.t .......... 1..1 ok 1 - exception in startup method causes all tests to be skipped ok # Failed test 'exception in method, but teardown is still run' # at t/teardown-when-test-dies.t line 29. # STDERR is: # # # # TeardownWhenTestDies->my_test_method # # Failed test 'my_test_method died (oops! at t/teardown-when-test-dies.t line 15.)' # # at t/teardown-when-test-dies.t line 28. # # (in TeardownWhenTestDies->my_test_method) # # not: # /#\s+Failed\ test.*?\n?.*?at\ t\/teardown\-when\-test\-dies\.t line 28.*\n?/ # # (in TeardownWhenTestDies->my_test_method) # # as expected t/teardown-when-test-dies.t .... 1..1 not ok 1 - exception in method, but teardown is still run Failed 1/1 subtests t/test_classes.t ............... 1..1 ok 1 - _test_classes deals with undef values ok t/test_deep.t .................. 1..1 ok 1 - Test::Deep is not included as a test class, even though isa always returns true ok t/test_method.t ................ 1..4 ok 1 - $ENV{TEST_METHOD} with an invalid regex should die ok 2 - no TEST_METHOD runs all tests ok 3 - single match just runs one test ok 4 - two matches run both tests ok t/test_verbose.t ............... 1..1 ok 1 - TEST_VERBOSE outputs method diagnostic ok # # My::Test->Tests_attribute_default_number_of_tests # # My::Test->Tests_attribute_set_number_of_tests t/Tests.t ...................... 1..2 ok 1 - Tests attribute default number of tests ok 2 - Tests attribute set number of tests ok # Test::More: 1.001014 t/todo.t ....................... 1..2 ok 1 - todo tests work ok 2 - todo_test should run 1 test ok Test Summary Report ------------------- t/skip2.t (Wstat: 0 Tests: 4 Failed: 1) Failed test: 1 t/teardown-when-test-dies.t (Wstat: 0 Tests: 1 Failed: 1) Failed test: 1 Files=57, Tests=189, 5 wallclock secs ( 0.18 usr 0.10 sys + 2.91 cusr 0.58 csys = 3.77 CPU) Result: FAIL Failed 2/57 test programs. 2/189 subtests failed. make: *** [test_dynamic] Error 255 ETHER/Test-Class-0.50.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ETHER/Test-Class-0.50.tar.gz JSWARTZ/CHI-0.60.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg JSWARTZ/CHI-0.60.tar.gz Has already been prepared Running make for J/JS/JSWARTZ/CHI-0.60.tar.gz Warning: Prerequisite 'Test::Class => 0' for 'JSWARTZ/CHI-0.60.tar.gz' failed when processing 'ETHER/Test-Class-0.50.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/CHI/Driver.pm blib/lib/CHI/Driver.pm cp lib/CHI/Serializer/JSON.pm blib/lib/CHI/Serializer/JSON.pm cp lib/CHI/CacheObject.pm blib/lib/CHI/CacheObject.pm cp lib/CHI/Constants.pm blib/lib/CHI/Constants.pm cp lib/CHI/t/Driver/Subcache.pm blib/lib/CHI/t/Driver/Subcache.pm cp lib/CHI/Driver/Base/CacheContainer.pm blib/lib/CHI/Driver/Base/CacheContainer.pm cp lib/CHI/t/Subclass.pm blib/lib/CHI/t/Subclass.pm cp lib/CHI/Test/Util.pm blib/lib/CHI/Test/Util.pm cp lib/CHI/Driver/Role/HasSubcaches.pm blib/lib/CHI/Driver/Role/HasSubcaches.pm cp lib/CHI/t/SetError.pm blib/lib/CHI/t/SetError.pm cp lib/CHI/t/Driver/CacheCache.pm blib/lib/CHI/t/Driver/CacheCache.pm cp lib/CHI/t/Driver/File/DepthZero.pm blib/lib/CHI/t/Driver/File/DepthZero.pm cp lib/CHI/Driver/Role/Universal.pm blib/lib/CHI/Driver/Role/Universal.pm cp lib/CHI/t/Bugs.pm blib/lib/CHI/t/Bugs.pm cp lib/CHI/Driver/Role/IsSubcache.pm blib/lib/CHI/Driver/Role/IsSubcache.pm cp lib/CHI/Test/Driver/NonMoose.pm blib/lib/CHI/Test/Driver/NonMoose.pm cp lib/CHI/Driver/File.pm blib/lib/CHI/Driver/File.pm cp lib/CHI/Driver/Null.pm blib/lib/CHI/Driver/Null.pm cp lib/CHI/t/Constants.pm blib/lib/CHI/t/Constants.pm cp lib/CHI/Test/Driver/Readonly.pm blib/lib/CHI/Test/Driver/Readonly.pm cp lib/CHI/t/Null.pm blib/lib/CHI/t/Null.pm cp lib/CHI/Serializer/Storable.pm blib/lib/CHI/Serializer/Storable.pm cp lib/CHI/t/Driver/NonMoose.pm blib/lib/CHI/t/Driver/NonMoose.pm cp lib/CHI/t/Driver/File.pm blib/lib/CHI/t/Driver/File.pm cp lib/CHI/t/Subcache.pm blib/lib/CHI/t/Subcache.pm cp lib/CHI/Test/Class.pm blib/lib/CHI/Test/Class.pm cp lib/CHI/Driver/Memory.pm blib/lib/CHI/Driver/Memory.pm cp lib/CHI/t/Driver/RawMemory.pm blib/lib/CHI/t/Driver/RawMemory.pm cp lib/CHI/t/Driver/Subcache/mirror_cache.pm blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm cp lib/CHI.pm blib/lib/CHI.pm cp lib/CHI/Types.pm blib/lib/CHI/Types.pm cp lib/CHI/Driver/Metacache.pm blib/lib/CHI/Driver/Metacache.pm cp lib/CHI/t/GetError.pm blib/lib/CHI/t/GetError.pm cp lib/CHI/t/Util.pm blib/lib/CHI/t/Util.pm cp lib/CHI/t/Initialize.pm blib/lib/CHI/t/Initialize.pm cp lib/CHI/Benchmarks.pod blib/lib/CHI/Benchmarks.pod cp lib/CHI/t/Driver/Memory.pm blib/lib/CHI/t/Driver/Memory.pm cp lib/CHI/Driver/RawMemory.pm blib/lib/CHI/Driver/RawMemory.pm cp lib/CHI/Stats.pm blib/lib/CHI/Stats.pm cp lib/CHI/t/Driver/FastMmap.pm blib/lib/CHI/t/Driver/FastMmap.pm cp lib/CHI/t/Config.pm blib/lib/CHI/t/Config.pm cp lib/CHI/Driver/FastMmap.pm blib/lib/CHI/Driver/FastMmap.pm cp lib/CHI/Util.pm blib/lib/CHI/Util.pm cp lib/CHI/t/RequiredModules.pm blib/lib/CHI/t/RequiredModules.pm cp lib/CHI/t/Sanity.pm blib/lib/CHI/t/Sanity.pm cp lib/CHI/Driver/Development.pod blib/lib/CHI/Driver/Development.pod cp lib/CHI/Driver/Role/IsSizeAware.pm blib/lib/CHI/Driver/Role/IsSizeAware.pm cp lib/CHI/t/Driver.pm blib/lib/CHI/t/Driver.pm cp lib/CHI/Test/Driver/Role/CheckKeyValidity.pm blib/lib/CHI/Test/Driver/Role/CheckKeyValidity.pm cp lib/CHI/Test/Driver/Writeonly.pm blib/lib/CHI/Test/Driver/Writeonly.pm cp lib/CHI/Driver/CacheCache.pm blib/lib/CHI/Driver/CacheCache.pm cp lib/CHI/t/Driver/Subcache/l1_cache.pm blib/lib/CHI/t/Driver/Subcache/l1_cache.pm cp lib/CHI/Test.pm blib/lib/CHI/Test.pm Manifying 15 pod documents JSWARTZ/CHI-0.60.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing CHI 0.60, Perl 5.022000, /Users/fly2200/ap2200-299195/bin/perl-dynamic t/00-load.t ............................. 1..1 ok 1 - use CHI; ok t/author-03-pod.t ....................... skipped: these tests are for testing by the author t/author-file-driver.t .................. skipped: these tests are for testing by the author t/author-no-data-serializer.t ........... skipped: these tests are for testing by the author t/author-RequiredModules.t .............. skipped: these tests are for testing by the author Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Bugs.pm line 7. Compilation failed in require at t/Bugs.t line 2. BEGIN failed--compilation aborted at t/Bugs.t line 2. t/Bugs.t ................................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Config.pm line 8. Compilation failed in require at t/Config.t line 2. BEGIN failed--compilation aborted at t/Config.t line 2. t/Config.t .............................. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Constants.pm line 6. Compilation failed in require at t/Constants.t line 2. BEGIN failed--compilation aborted at t/Constants.t line 2. t/Constants.t ........................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at t/Driver-Memory.t line 2. BEGIN failed--compilation aborted at t/Driver-Memory.t line 2. t/Driver-Memory.t ....................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/RawMemory.pm line 7. Compilation failed in require at t/Driver-RawMemory.t line 2. BEGIN failed--compilation aborted at t/Driver-RawMemory.t line 2. t/Driver-RawMemory.t .................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/GetError.pm line 7. Compilation failed in require at t/GetError.t line 2. BEGIN failed--compilation aborted at t/GetError.t line 2. t/GetError.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Initialize.pm line 7. Compilation failed in require at t/Initialize.t line 2. BEGIN failed--compilation aborted at t/Initialize.t line 2. t/Initialize.t .......................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/release-dependent.t ................... skipped: these tests are for release candidate testing Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Sanity.pm line 6. Compilation failed in require at t/Sanity.t line 2. BEGIN failed--compilation aborted at t/Sanity.t line 2. t/Sanity.t .............................. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/SetError.pm line 7. Compilation failed in require at t/SetError.t line 2. BEGIN failed--compilation aborted at t/SetError.t line 2. t/SetError.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/CacheCache.pm line 7. Compilation failed in require at t/smoke-Driver-CacheCache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-CacheCache.t line 10. t/smoke-Driver-CacheCache.t ............. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/FastMmap.pm line 8. Compilation failed in require at t/smoke-Driver-FastMmap.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-FastMmap.t line 10. t/smoke-Driver-FastMmap.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/File.pm line 11. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/File/DepthZero.pm line 8. Compilation failed in require at t/smoke-Driver-File-DepthZero.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-File-DepthZero.t line 10. t/smoke-Driver-File-DepthZero.t ......... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/File.pm line 11. Compilation failed in require at t/smoke-Driver-File.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-File.t line 10. t/smoke-Driver-File.t ................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Memory.pm line 8. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/NonMoose.pm line 6. Compilation failed in require at t/smoke-Driver-NonMoose.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-NonMoose.t line 10. t/smoke-Driver-NonMoose.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Subcache.pm line 6. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Subcache/l1_cache.pm line 8. Compilation failed in require at t/smoke-Driver-Subcache-l1_cache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-l1_cache.t line 10. t/smoke-Driver-Subcache-l1_cache.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver.pm line 17. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Subcache.pm line 6. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Driver/Subcache/mirror_cache.pm line 7. Compilation failed in require at t/smoke-Driver-Subcache-mirror_cache.t line 10. BEGIN failed--compilation aborted at t/smoke-Driver-Subcache-mirror_cache.t line 10. t/smoke-Driver-Subcache-mirror_cache.t .. Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Null.pm line 6. Compilation failed in require at t/smoke-Null.t line 10. BEGIN failed--compilation aborted at t/smoke-Null.t line 10. t/smoke-Null.t .......................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Subcache.pm line 5. Compilation failed in require at t/Subcache.t line 2. BEGIN failed--compilation aborted at t/Subcache.t line 2. t/Subcache.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Subclass.pm line 6. Compilation failed in require at t/Subclass.t line 2. BEGIN failed--compilation aborted at t/Subclass.t line 2. t/Subclass.t ............................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Base class package "Test::Class" is empty. (Perhaps you need to 'use' the module which defines that package first, or make that module available in @INC (@INC contains: /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .). at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/Test/Class.pm line 7. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 100. ...propagated at /Users/fly2200/cpanfly-5.22/var/megalib/base.pm line 109. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/cpan/build/CHI-0.60-cig8fg/blib/lib/CHI/t/Util.pm line 9. Compilation failed in require at t/Util.t line 2. BEGIN failed--compilation aborted at t/Util.t line 2. t/Util.t ................................ Dubious, test returned 2 (wstat 512, 0x200) No subtests run Test Summary Report ------------------- t/Bugs.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Config.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Constants.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Driver-Memory.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Driver-RawMemory.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/GetError.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Initialize.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Sanity.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/SetError.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-CacheCache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-FastMmap.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-File-DepthZero.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-File.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-NonMoose.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-Subcache-l1_cache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Driver-Subcache-mirror_cache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/smoke-Null.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Subcache.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Subclass.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/Util.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=26, Tests=1, 5 wallclock secs ( 0.08 usr 0.05 sys + 3.69 cusr 0.60 csys = 4.42 CPU) Result: FAIL Failed 20/26 test programs. 0/1 subtests failed. make: *** [test_dynamic] Error 2 JSWARTZ/CHI-0.60.tar.gz one dependency not OK (Test::Class); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports JSWARTZ/CHI-0.60.tar.gz Running test for module 'Perl::PrereqScanner::Lite' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/M/MO/MOZNION/Perl-PrereqScanner-Lite-0.26.tar.gz ok Perl-PrereqScanner-Lite-0.26/Build.PL Perl-PrereqScanner-Lite-0.26/Changes Perl-PrereqScanner-Lite-0.26/LICENSE Perl-PrereqScanner-Lite-0.26/META.json Perl-PrereqScanner-Lite-0.26/README.md Perl-PrereqScanner-Lite-0.26/author/benchmark.pl Perl-PrereqScanner-Lite-0.26/author/benchmark_between_branches.pl Perl-PrereqScanner-Lite-0.26/author/benchmark_with_moose.pl Perl-PrereqScanner-Lite-0.26/cpanfile Perl-PrereqScanner-Lite-0.26/eg/scan_file.pl Perl-PrereqScanner-Lite-0.26/eg/scan_module.pl Perl-PrereqScanner-Lite-0.26/eg/scan_string.pl Perl-PrereqScanner-Lite-0.26/eg/scan_tokens.pl Perl-PrereqScanner-Lite-0.26/lib/Perl/PrereqScanner/Lite.pm Perl-PrereqScanner-Lite-0.26/lib/Perl/PrereqScanner/Lite/Constants.pm Perl-PrereqScanner-Lite-0.26/lib/Perl/PrereqScanner/Lite/Scanner/Moose.pm Perl-PrereqScanner-Lite-0.26/lib/Perl/PrereqScanner/Lite/Scanner/Version.pm Perl-PrereqScanner-Lite-0.26/minil.toml Perl-PrereqScanner-Lite-0.26/t/00_compile.t Perl-PrereqScanner-Lite-0.26/t/01_scan_file.t Perl-PrereqScanner-Lite-0.26/t/02_scan_string.t Perl-PrereqScanner-Lite-0.26/t/03_scan_tokens.t Perl-PrereqScanner-Lite-0.26/t/04_scan_module.t Perl-PrereqScanner-Lite-0.26/t/10_moose_extends.t Perl-PrereqScanner-Lite-0.26/t/11_version_method.t Perl-PrereqScanner-Lite-0.26/t/12_parameterized_roles.t Perl-PrereqScanner-Lite-0.26/t/20_left_paran_is_behind_at_module_name.t Perl-PrereqScanner-Lite-0.26/t/30_v_string.t Perl-PrereqScanner-Lite-0.26/t/40_extra_scanners.t Perl-PrereqScanner-Lite-0.26/t/Util.pm Perl-PrereqScanner-Lite-0.26/t/resources/basic.pl Perl-PrereqScanner-Lite-0.26/t/resources/left_paren_is_behind_at_module_name/basic.pl Perl-PrereqScanner-Lite-0.26/t/resources/left_paren_is_behind_at_module_name/with_version.pl Perl-PrereqScanner-Lite-0.26/t/resources/moose.pl Perl-PrereqScanner-Lite-0.26/t/resources/moose_parameterized_roles.pl Perl-PrereqScanner-Lite-0.26/t/resources/v_string.pl Perl-PrereqScanner-Lite-0.26/t/resources/version.pl Perl-PrereqScanner-Lite-0.26/xt/perlcritic.t Perl-PrereqScanner-Lite-0.26/xt/perlcriticrc Perl-PrereqScanner-Lite-0.26/META.yml Perl-PrereqScanner-Lite-0.26/MANIFEST Configuring M/MO/MOZNION/Perl-PrereqScanner-Lite-0.26.tar.gz with Build.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Build.PL Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Perl-PrereqScanner-Lite' version '0.26' cp META.json MYMETA.json cp META.yml MYMETA.yml MOZNION/Perl-PrereqScanner-Lite-0.26.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Build.PL -- OK Running Build for M/MO/MOZNION/Perl-PrereqScanner-Lite-0.26.tar.gz ---- Unsatisfied dependencies detected during ---- ---- MOZNION/Perl-PrereqScanner-Lite-0.26.tar.gz ---- Compiler::Lexer [requires] Running test for module 'Compiler::Lexer' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/G/GO/GOCCY/Compiler-Lexer-0.22.tar.gz ok Compiler-Lexer-0.22/Build.PL Compiler-Lexer-0.22/Changes Compiler-Lexer-0.22/LICENSE Compiler-Lexer-0.22/META.json Compiler-Lexer-0.22/README.md Compiler-Lexer-0.22/builder/MyBuilder.pm Compiler-Lexer-0.22/cpanfile Compiler-Lexer-0.22/cpanfile.snapshot Compiler-Lexer-0.22/example/benchmark.pl Compiler-Lexer-0.22/example/sample.pl Compiler-Lexer-0.22/gen/double_charactor_operator.gperf Compiler-Lexer-0.22/gen/gen_constants.yaml Compiler-Lexer-0.22/gen/gen_decl.pl Compiler-Lexer-0.22/gen/reserved_keywords.gperf Compiler-Lexer-0.22/gen/test_generator.pl Compiler-Lexer-0.22/gen/triple_charactor_operator.gperf Compiler-Lexer-0.22/include/common.hpp Compiler-Lexer-0.22/include/gen_token.hpp Compiler-Lexer-0.22/include/keyword.hpp Compiler-Lexer-0.22/include/lexer.hpp Compiler-Lexer-0.22/include/token.hpp Compiler-Lexer-0.22/lib/Compiler/Lexer.pm Compiler-Lexer-0.22/lib/Compiler/Lexer/Constants.pm Compiler-Lexer-0.22/lib/Compiler/Lexer/Token.pm Compiler-Lexer-0.22/minil.toml Compiler-Lexer-0.22/src/Compiler-Lexer.xs Compiler-Lexer-0.22/src/compiler/lexer/Compiler_annotator.cpp Compiler-Lexer-0.22/src/compiler/lexer/Compiler_lexer.cpp Compiler-Lexer-0.22/src/compiler/lexer/Compiler_manager.cpp Compiler-Lexer-0.22/src/compiler/lexer/Compiler_scanner.cpp Compiler-Lexer-0.22/src/compiler/util/Compiler_double_charactor_operator.cpp Compiler-Lexer-0.22/src/compiler/util/Compiler_gen_token_decl.cpp Compiler-Lexer-0.22/src/compiler/util/Compiler_reserved_keyword.cpp Compiler-Lexer-0.22/src/compiler/util/Compiler_token.cpp Compiler-Lexer-0.22/src/compiler/util/Compiler_triple_charactor_operator.cpp Compiler-Lexer-0.22/src/compiler/util/Compiler_util.cpp Compiler-Lexer-0.22/src/typemap Compiler-Lexer-0.22/t/Lexer.t Compiler-Lexer-0.22/t/format.t Compiler-Lexer-0.22/t/issue_32.t Compiler-Lexer-0.22/t/issue_35.t Compiler-Lexer-0.22/t/issue_38.t Compiler-Lexer-0.22/t/issue_39.t Compiler-Lexer-0.22/t/issue_40.t Compiler-Lexer-0.22/t/issue_42.t Compiler-Lexer-0.22/t/issue_43.t Compiler-Lexer-0.22/t/issue_44.t Compiler-Lexer-0.22/t/issue_45.t Compiler-Lexer-0.22/t/issue_48.t Compiler-Lexer-0.22/t/issue_53.t Compiler-Lexer-0.22/t/issue_reports.t Compiler-Lexer-0.22/t/package.t Compiler-Lexer-0.22/t/perl6.t Compiler-Lexer-0.22/t/recursive_tokenize.t Compiler-Lexer-0.22/t/verbose.t Compiler-Lexer-0.22/typemap Compiler-Lexer-0.22/META.yml Compiler-Lexer-0.22/MANIFEST Configuring G/GO/GOCCY/Compiler-Lexer-0.22.tar.gz with Build.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Build.PL Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Compiler-Lexer' version '0.22' cp META.json MYMETA.json cp META.yml MYMETA.yml GOCCY/Compiler-Lexer-0.22.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Build.PL -- OK Running Build for G/GO/GOCCY/Compiler-Lexer-0.22.tar.gz >>> ./Build Building Compiler-Lexer gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/lexer/Compiler_annotator.o src/compiler/lexer/Compiler_annotator.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/lexer/Compiler_lexer.o src/compiler/lexer/Compiler_lexer.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/lexer/Compiler_manager.o src/compiler/lexer/Compiler_manager.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/lexer/Compiler_scanner.o src/compiler/lexer/Compiler_scanner.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/util/Compiler_double_charactor_operator.o src/compiler/util/Compiler_double_charactor_operator.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/util/Compiler_gen_token_decl.o src/compiler/util/Compiler_gen_token_decl.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/util/Compiler_reserved_keyword.o src/compiler/util/Compiler_reserved_keyword.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/util/Compiler_token.o src/compiler/util/Compiler_token.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/util/Compiler_triple_charactor_operator.o src/compiler/util/Compiler_triple_charactor_operator.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o src/compiler/util/Compiler_util.o src/compiler/util/Compiler_util.cpp gcc -Isrc -I/Users/fly2200/ap2200-299195/lib/CORE -DVERSION="0.22" -DXS_VERSION="0.22" -Iinclude -Wno-missing-field-initializers -g3 -xc++ -c -fno-common -DPERL_DARWIN -no-cpp-precomp -arch x86_64 -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-strict-aliasing -pipe -fstack-protector -O3 -o lib/Compiler/Lexer.o lib/Compiler/Lexer.c lib/Compiler/Lexer.c:502:1: warning: duplicate 'extern' declaration specifier [-Wduplicate-decl-specifier] XS_EXTERNAL(boot_Compiler__Lexer); /* prototype to pass -Wmissing-prototypes */ ^ /Users/fly2200/ap2200-299195/lib/CORE/XSUB.h:145:33: note: expanded from macro 'XS_EXTERNAL' # define XS_EXTERNAL(name) extern "C" XSPROTO(name) ^ 1 warning generated. ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/Compiler/Lexer/Lexer.bs') env LD_RUN_PATH=/Users/fly2200/ap2200-299195/lib/CORE gcc -mmacosx-version-min=10.9 -bundle -undefined dynamic_lookup -Wl,-search_paths_first -arch x86_64 -fstack-protector -o blib/arch/auto/Compiler/Lexer/Lexer.bundle lib/Compiler/Lexer.o src/compiler/lexer/Compiler_annotator.o src/compiler/lexer/Compiler_lexer.o src/compiler/lexer/Compiler_manager.o src/compiler/lexer/Compiler_scanner.o src/compiler/util/Compiler_double_charactor_operator.o src/compiler/util/Compiler_gen_token_decl.o src/compiler/util/Compiler_reserved_keyword.o src/compiler/util/Compiler_token.o src/compiler/util/Compiler_triple_charactor_operator.o src/compiler/util/Compiler_util.o -lstdc++ GOCCY/Compiler-Lexer-0.22.tar.gz ./Build -- OK Running Build test >>> ./Build test verbose=1 t/Lexer.t ............... 1..1 ok 1 - use Compiler::Lexer; $VAR1 = [ { 'args' => '', 'name' => 'Test::Module' } ]; ok t/format.t .............. ok 1 - use Compiler::Lexer; # Subtest: tokenize ok 1 1..1 ok 2 - tokenize # Subtest: omitted handler name ok 1 1..1 ok 3 - omitted handler name # Subtest: do not misrecognize when confusing case ok 1 1..1 ok 4 - do not misrecognize when confusing case 1..4 ok t/issue_32.t ............ ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 1..6 ok t/issue_35.t ............ ok 1 1..1 ok t/issue_38.t ............ ok 1 ok 2 1..2 ok t/issue_39.t ............ ok 1 1..1 ok t/issue_40.t ............ ok 1 1..1 ok t/issue_42.t ............ ok 1 1..1 ok t/issue_43.t ............ ok 1 1..1 ok t/issue_44.t ............ ok 1 1..1 ok t/issue_45.t ............ ok 1 1..1 ok t/issue_48.t ............ ok 1 1..1 ok t/issue_53.t ............ $VAR1 = [ bless( { 'type' => 155, 'kind' => 31, 'has_warnings' => 0, 'line' => 1, 'stype' => 0, 'name' => 'RegReplace', 'data' => 's' }, 'Compiler::Lexer::Token' ), bless( { 'stype' => 0, 'line' => 1, 'has_warnings' => 0, 'type' => 151, 'kind' => 24, 'data' => '/', 'name' => 'RegDelim' }, 'Compiler::Lexer::Token' ), bless( { 'name' => 'RegReplaceFrom', 'data' => '', 'type' => 156, 'kind' => 24, 'has_warnings' => 0, 'line' => 1, 'stype' => 0 }, 'Compiler::Lexer::Token' ), bless( { 'data' => '/', 'name' => 'RegMiddleDelim', 'line' => 1, 'stype' => 0, 'has_warnings' => 0, 'kind' => 24, 'type' => 153 }, 'Compiler::Lexer::Token' ), bless( { 'name' => 'RegReplaceTo', 'data' => '', 'line' => 1, 'stype' => 0, 'kind' => 24, 'type' => 157, 'has_warnings' => 0 }, 'Compiler::Lexer::Token' ), bless( { 'line' => 1, 'stype' => 0, 'has_warnings' => 0, 'kind' => 24, 'type' => 151, 'data' => '/', 'name' => 'RegDelim' }, 'Compiler::Lexer::Token' ), bless( { 'data' => ';', 'name' => 'SemiColon', 'stype' => 0, 'line' => 1, 'has_warnings' => 0, 'type' => 106, 'kind' => 21 }, 'Compiler::Lexer::Token' ) ]; ok 1 1..1 ok t/issue_reports.t ....... ok 1 - use Compiler::Lexer; # Subtest: tokenize ok 1 1..1 ok 2 - tokenize 1..2 ok t/package.t ............. 1..1 ok 1 - use Compiler::Lexer; $VAR1 = [ bless( { 'kind' => 26, 'type' => 128, 'data' => 'package', 'has_warnings' => 0, 'name' => 'Package', 'stype' => 0, 'line' => 1 }, 'Compiler::Lexer::Token' ), bless( { 'stype' => 0, 'line' => 1, 'name' => 'Class', 'data' => 'Foo', 'has_warnings' => 0, 'kind' => 27, 'type' => 129 }, 'Compiler::Lexer::Token' ) ]; ok t/perl6.t ............... ok 1 ok 2 1..2 ok Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Can't cd to (/Users/fly2200/cpanfly-5.22/var/megalib/Bio/) SABio: Permission denied at /Users/fly2200/cpanfly-5.22/var/cpan/build/Compiler-Lexer-0.22-CCq31F/blib/lib/Compiler/Lexer.pm line 51. Timeout (max run time is 300s) /Users/fly2200/ap2200-299195/bin/perl-dynamic killed by signal 15.