PATH=/Users/fly2200/cpanfly-5.22/bin:/Users/fly2200/ap2200-299195/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin Start 2017-01-05T02:15:51 ActivePerl-2200 CPAN-2.10 Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata' Database was generated on Wed, 04 Jan 2017 06:41:03 GMT Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz ok Perinci-CmdLine-Lite-1.68/ Perinci-CmdLine-Lite-1.68/README Perinci-CmdLine-Lite-1.68/lib/ Perinci-CmdLine-Lite-1.68/lib/Perinci/ Perinci-CmdLine-Lite-1.68/lib/Perinci/CmdLine/ Perinci-CmdLine-Lite-1.68/lib/Perinci/CmdLine/Lite.pm Perinci-CmdLine-Lite-1.68/lib/Perinci/CmdLine/Base.pm Perinci-CmdLine-Lite-1.68/lib/Perinci/CmdLine/Util/ Perinci-CmdLine-Lite-1.68/lib/Perinci/CmdLine/Util/Config.pm Perinci-CmdLine-Lite-1.68/Makefile.PL Perinci-CmdLine-Lite-1.68/Changes.new Perinci-CmdLine-Lite-1.68/share/ Perinci-CmdLine-Lite-1.68/share/templates/ Perinci-CmdLine-Lite-1.68/share/templates/description.txt Perinci-CmdLine-Lite-1.68/share/templates/synopsis.txt Perinci-CmdLine-Lite-1.68/Changes Perinci-CmdLine-Lite-1.68/dist.ini Perinci-CmdLine-Lite-1.68/LICENSE Perinci-CmdLine-Lite-1.68/t/ Perinci-CmdLine-Lite-1.68/t/00-compile.t Perinci-CmdLine-Lite-1.68/t/suite.t Perinci-CmdLine-Lite-1.68/t/release-rinci.t Perinci-CmdLine-Lite-1.68/t/author-pod-syntax.t Perinci-CmdLine-Lite-1.68/t/author-pod-coverage.t Perinci-CmdLine-Lite-1.68/weaver.ini Perinci-CmdLine-Lite-1.68/MANIFEST Perinci-CmdLine-Lite-1.68/META.json Perinci-CmdLine-Lite-1.68/META.yml Perinci-CmdLine-Lite-1.68/devscripts/ Perinci-CmdLine-Lite-1.68/devscripts/bench-startup Configuring P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::Complete 0.89 not found. We have 0.88. Warning: prerequisite Progress::Any::Output::TermProgressBarColor 0.17 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::CmdLine::Lite Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz ---- Progress::Any::Output::TermProgressBarColor [requires] Perinci::Sub::Complete [requires] Running test for module 'Progress::Any::Output::TermProgressBarColor' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz ok Progress-Any-Output-TermProgressBarColor-0.22/ Progress-Any-Output-TermProgressBarColor-0.22/README Progress-Any-Output-TermProgressBarColor-0.22/lib/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/Any/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/Any/Output/ Progress-Any-Output-TermProgressBarColor-0.22/lib/Progress/Any/Output/TermProgressBarColor.pm Progress-Any-Output-TermProgressBarColor-0.22/Makefile.PL Progress-Any-Output-TermProgressBarColor-0.22/Changes Progress-Any-Output-TermProgressBarColor-0.22/dist.ini Progress-Any-Output-TermProgressBarColor-0.22/LICENSE Progress-Any-Output-TermProgressBarColor-0.22/t/ Progress-Any-Output-TermProgressBarColor-0.22/t/00-compile.t Progress-Any-Output-TermProgressBarColor-0.22/t/01-basic.t Progress-Any-Output-TermProgressBarColor-0.22/t/author-pod-syntax.t Progress-Any-Output-TermProgressBarColor-0.22/t/author-pod-coverage.t Progress-Any-Output-TermProgressBarColor-0.22/weaver.ini Progress-Any-Output-TermProgressBarColor-0.22/MANIFEST Progress-Any-Output-TermProgressBarColor-0.22/META.json Progress-Any-Output-TermProgressBarColor-0.22/META.yml Configuring P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Progress::Any::Output::TermProgressBarColor Writing MYMETA.yml and MYMETA.json PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz >>> make cp lib/Progress/Any/Output/TermProgressBarColor.pm blib/lib/Progress/Any/Output/TermProgressBarColor.pm Manifying 1 pod document PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..1 ok 1 - Progress/Any/Output/TermProgressBarColor.pm loaded ok ok # Failed test at t/01-basic.t line 18. # ' 10% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'default' # at t/01-basic.t line 20. # Failed test at t/01-basic.t line 28. # ' 20% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'fh option' # at t/01-basic.t line 30. # Failed test at t/01-basic.t line 41. # ' 30% []1s left ' # doesn't match '(?^:foo)' # Looks like you failed 1 test of 2. # Failed test 'default (wide)' # at t/01-basic.t line 43. # Looks like you failed 3 tests of 3. t/01-basic.t ............. # Subtest: default not ok 1 ok 2 1..2 not ok 1 - default # Subtest: fh option not ok 1 ok 2 1..2 not ok 2 - fh option # Subtest: default (wide) not ok 1 ok 2 1..2 not ok 3 - default (wide) 1..3 Dubious, test returned 3 (wstat 768, 0x300) Failed 3/3 subtests t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author Test Summary Report ------------------- t/01-basic.t (Wstat: 768 Tests: 3 Failed: 3) Failed tests: 1-3 Non-zero exit status: 3 Files=4, Tests=4, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.16 cusr 0.05 csys = 0.24 CPU) Result: FAIL Failed 1/4 test programs. 3/4 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz Running test for module 'Perinci::Sub::Complete' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz ok Perinci-Sub-Complete-0.90/ Perinci-Sub-Complete-0.90/META.json Perinci-Sub-Complete-0.90/LICENSE Perinci-Sub-Complete-0.90/Changes Perinci-Sub-Complete-0.90/META.yml Perinci-Sub-Complete-0.90/Makefile.PL Perinci-Sub-Complete-0.90/t/ Perinci-Sub-Complete-0.90/t/author-pod-coverage.t Perinci-Sub-Complete-0.90/t/complete_arg_index.t Perinci-Sub-Complete-0.90/t/complete_cli_arg.t Perinci-Sub-Complete-0.90/t/complete_from_schema.t Perinci-Sub-Complete-0.90/t/complete_arg_elem.t Perinci-Sub-Complete-0.90/t/complete_arg_val.t Perinci-Sub-Complete-0.90/t/release-rinci.t Perinci-Sub-Complete-0.90/t/author-pod-syntax.t Perinci-Sub-Complete-0.90/t/00-compile.t Perinci-Sub-Complete-0.90/README Perinci-Sub-Complete-0.90/dist.ini Perinci-Sub-Complete-0.90/lib/ Perinci-Sub-Complete-0.90/lib/Perinci/ Perinci-Sub-Complete-0.90/lib/Perinci/Sub/ Perinci-Sub-Complete-0.90/lib/Perinci/Sub/Complete.pm Perinci-Sub-Complete-0.90/MANIFEST Perinci-Sub-Complete-0.90/weaver.ini Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz >>> make cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ............ 1..1 ok 1 - Perinci/Sub/Complete.pm loaded ok ok t/author-pod-coverage.t ... skipped: these tests are for testing by the author t/author-pod-syntax.t ..... skipped: these tests are for testing by the author t/complete_arg_elem.t ..... ok 1 1..1 ok t/complete_arg_index.t .... ok 1 1..1 ok t/complete_arg_val.t ...... ok 1 1..1 ok Unknown property '/args/h2/index_completion' (and couldn't load property module 'Perinci/Sub/Property/arg/index_completion.pm'): Can't locate Perinci/Sub/Property/arg/index_completion.pm in @INC (you may need to install the Perinci::Sub::Property::arg::index_completion module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Complete-0.90-QbyKCI/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Complete-0.90-QbyKCI/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 58. t/complete_cli_arg.t ...... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/complete_from_schema.t .. # Subtest: schema must be normalized ok 1 1..1 ok 1 - schema must be normalized # Subtest: is clause ok 1 ok 2 1..2 ok 2 - is clause # Subtest: in clause ok 1 1..1 ok 3 - in clause # Subtest: int # Subtest: min/max below limit ok 1 1..1 ok 1 - min/max below limit # Subtest: min/xmax below limit ok 1 1..1 ok 2 - min/xmax below limit # Subtest: xmin/max below limit ok 1 1..1 ok 3 - xmin/max below limit # Subtest: xmin/xmax below limit ok 1 1..1 ok 4 - xmin/xmax below limit # Subtest: between below limit ok 1 1..1 ok 5 - between below limit # Subtest: xbetween below limit ok 1 1..1 ok 6 - xbetween below limit # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 7 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 8 - digit by digit completion, with min/max 1..8 ok 4 - int # Subtest: float # Subtest: digit by digit completion ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 1..7 ok 1 - digit by digit completion # Subtest: digit by digit completion, with min/max ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - digit by digit completion, with min/max 1..2 ok 5 - float # Subtest: any ok 1 ok 2 1..2 ok 6 - any # Subtest: schema is based on other schema ok 1 ok 2 ok 3 1..3 ok 7 - schema is based on other schema 1..7 ok t/release-rinci.t ......... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/complete_cli_arg.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=9, Tests=11, 0 wallclock secs ( 0.04 usr 0.02 sys + 0.19 cusr 0.05 csys = 0.30 CPU) Result: FAIL Failed 1/9 test programs. 0/11 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-CmdLine-Lite-1.68-lnxdDj PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz Warning: Prerequisite 'Progress::Any::Output::TermProgressBarColor => 0.17' for 'PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz' failed when processing 'PERLANCAR/Progress-Any-Output-TermProgressBarColor-0.22.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Perinci::Sub::Complete => 0.89' for 'PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz' failed when processing 'PERLANCAR/Perinci-Sub-Complete-0.90.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp share/templates/synopsis.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt cp share/templates/description.txt blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm cp lib/Perinci/CmdLine/Util/Config.pm blib/lib/Perinci/CmdLine/Util/Config.pm cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm Manifying 3 pod documents PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/description.txt (unchanged) Skip blib/lib/auto/share/dist/Perinci-CmdLine-Lite/templates/synopsis.txt (unchanged) PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..3 ok 1 - Perinci/CmdLine/Base.pm loaded ok ok 2 - Perinci/CmdLine/Lite.pm loaded ok ok 3 - Perinci/CmdLine/Util/Config.pm loaded ok ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author t/release-rinci.t ........ skipped: these tests are for release candidate testing # Child (help for cli with subcommands) exited without calling finalize() # Failed test 'help for cli with subcommands' # at /Users/fly2200/cpanfly-5.22/var/megalib/Devel/Confess.pm line 244. Can't generate CLI script at /var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/clibusk4IdO: 400 - Argument 'subcommands' fails validation: Not of type hash at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 349. Test::Perinci::CmdLine::__ANON__[/Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm:426]() called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 261 Test::Builder::__ANON__() called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 266 eval {...} called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 266 Test::Builder::subtest(Test::Builder=HASH(0x7fc91a00c890), "help for cli with subcommands", CODE(0x7fc919c56078)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/More.pm line 771 Test::More::subtest("help for cli with subcommands", CODE(0x7fc919c56078)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426 Test::Perinci::CmdLine::__ANON__[/Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm:428]("gen_args", HASH(0x7fc91a20e340), "argv", ARRAY(0x7fc91a20e040), "exit_code", 0, "inline_gen_args", HASH(0x7fc91a20e238), ...) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 475 Test::Perinci::CmdLine::__ANON__[/Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm:492]() called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 261 Test::Builder::__ANON__() called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 266 eval {...} called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 266 Test::Builder::subtest(Test::Builder=HASH(0x7fc91a00c890), "help action", CODE(0x7fc919c54800)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/More.pm line 771 Test::More::subtest("help action", CODE(0x7fc919c54800)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493 Test::Perinci::CmdLine::pericmd_run_test_groups_ok("exclude_tags", ARRAY(0x7fc919804280), "class", "Perinci::CmdLine::Lite", "include_tags", undef, "exclude_tags", ARRAY(0x7fc919804280), ...) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 1572 Test::Perinci::CmdLine::pericmd_run_suite_ok("class", "Perinci::CmdLine::Lite", "exclude_tags", ARRAY(0x7fc919804280)) called at t/suite.t line 12 at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 279. Test::Builder::subtest(Test::Builder=HASH(0x7fc91a00c890), "help for cli with subcommands", CODE(0x7fc919c56078)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/More.pm line 771 Test::More::subtest("help for cli with subcommands", CODE(0x7fc919c56078)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 426 Test::Perinci::CmdLine::__ANON__[/Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm:428]("gen_args", HASH(0x7fc91a20e340), "argv", ARRAY(0x7fc91a20e040), "exit_code", 0, "inline_gen_args", HASH(0x7fc91a20e238), ...) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 475 Test::Perinci::CmdLine::__ANON__[/Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm:492]() called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 261 Test::Builder::__ANON__() called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 266 eval {...} called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 266 Test::Builder::subtest(Test::Builder=HASH(0x7fc91a00c890), "help action", CODE(0x7fc919c54800)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/More.pm line 771 Test::More::subtest("help action", CODE(0x7fc919c54800)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493 Test::Perinci::CmdLine::pericmd_run_test_groups_ok("exclude_tags", ARRAY(0x7fc919804280), "class", "Perinci::CmdLine::Lite", "include_tags", undef, "exclude_tags", ARRAY(0x7fc919804280), ...) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 1572 Test::Perinci::CmdLine::pericmd_run_suite_ok("class", "Perinci::CmdLine::Lite", "exclude_tags", ARRAY(0x7fc919804280)) called at t/suite.t line 12 at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 279. Test::Builder::subtest(Test::Builder=HASH(0x7fc91a00c890), "help action", CODE(0x7fc919c54800)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/More.pm line 771 Test::More::subtest("help action", CODE(0x7fc919c54800)) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 493 Test::Perinci::CmdLine::pericmd_run_test_groups_ok("exclude_tags", ARRAY(0x7fc919804280), "class", "Perinci::CmdLine::Lite", "include_tags", undef, "exclude_tags", ARRAY(0x7fc919804280), ...) called at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Perinci/CmdLine.pm line 1572 Test::Perinci::CmdLine::pericmd_run_suite_ok("class", "Perinci::CmdLine::Lite", "exclude_tags", ARRAY(0x7fc919804280)) called at t/suite.t line 12 # Child (help action) exited without calling finalize() # Failed test 'help action' # at /Users/fly2200/cpanfly-5.22/var/megalib/Devel/Confess.pm line 244. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 25 just after 1. t/suite.t ................ # Subtest: help action ok 1 - dummy # Subtest: --help # Generated CLI script at /var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/cliyPnYiCgf # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/cliyPnYiCgf', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--help' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 2 - --help # Subtest: + is not accepted as option starter # Generated CLI script at /var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/climdmDfus5 # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/climdmDfus5', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '+h' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 3 - + is not accepted as option starter # Subtest: + is not accepted as option starter (2) # Generated CLI script at /var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/cliSflsihUn # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/cliSflsihUn', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '+help' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code 1..1 ok 4 - + is not accepted as option starter (2) # Subtest: extra args is okay # Generated CLI script at /var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/cliZktZh_Fy # gen_pericmd_script args: { # 'cmdline' => 'Perinci::CmdLine::Lite', # 'output_file' => '/var/folders/sy/bflgtq095hvc8l1hd9bs3dp40000gq/T/etX6xh1uIp/cliZktZh_Fy', # 'overwrite' => 1, # 'read_config' => 0, # 'read_env' => 0, # 'url' => '/Perinci/Examples/Tiny/noop' # } # argv: [ # '--help', # '1', # '2', # '3' # ] # Script's stdout: # Script's stderr: <> ok 1 - exit_code ok 2 - stdout_like 1..2 ok 5 - extra args is okay # Subtest: help for cli with subcommands not ok 6 - help for cli with subcommands not ok 1 - help action Dubious, test returned 25 (wstat 6400, 0x1900) Failed 1/1 subtests Test Summary Report ------------------- t/suite.t (Wstat: 6400 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 25 Parse errors: No plan found in TAP output Files=5, Tests=4, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.36 cusr 0.10 csys = 0.51 CPU) Result: FAIL Failed 1/5 test programs. 1/4 subtests failed. make: *** [test_dynamic] Error 25 PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz one dependency not OK (Progress::Any::Output::TermProgressBarColor); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-CmdLine-Lite-1.68.tar.gz Finished 2017-01-05T02:15:56