PATH=/usr/bin:/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin Start 2017-06-02T00:33:21 ActivePerl-2200 CPAN-2.10 Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata' Database was generated on Thu, 01 Jun 2017 04:17:02 GMT Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz ok Perinci-Sub-GetArgs-Argv-0.81/ Perinci-Sub-GetArgs-Argv-0.81/README Perinci-Sub-GetArgs-Argv-0.81/dist.ini Perinci-Sub-GetArgs-Argv-0.81/Makefile.PL Perinci-Sub-GetArgs-Argv-0.81/META.yml Perinci-Sub-GetArgs-Argv-0.81/t/ Perinci-Sub-GetArgs-Argv-0.81/t/author-pod-syntax.t Perinci-Sub-GetArgs-Argv-0.81/t/release-rinci.t Perinci-Sub-GetArgs-Argv-0.81/t/00-compile.t Perinci-Sub-GetArgs-Argv-0.81/t/get_args_from_argv.t Perinci-Sub-GetArgs-Argv-0.81/t/gen_getopt_long_spec_from_meta.t Perinci-Sub-GetArgs-Argv-0.81/t/_is_simple_or_array_of_simple_or_hash_of_simple.t Perinci-Sub-GetArgs-Argv-0.81/t/author-pod-coverage.t Perinci-Sub-GetArgs-Argv-0.81/weaver.ini Perinci-Sub-GetArgs-Argv-0.81/META.json Perinci-Sub-GetArgs-Argv-0.81/MANIFEST Perinci-Sub-GetArgs-Argv-0.81/lib/ Perinci-Sub-GetArgs-Argv-0.81/lib/Perinci/ Perinci-Sub-GetArgs-Argv-0.81/lib/Perinci/Sub/ Perinci-Sub-GetArgs-Argv-0.81/lib/Perinci/Sub/GetArgs/ Perinci-Sub-GetArgs-Argv-0.81/lib/Perinci/Sub/GetArgs/Argv.pm Perinci-Sub-GetArgs-Argv-0.81/LICENSE Perinci-Sub-GetArgs-Argv-0.81/Changes Configuring P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::Util 0.46 not found. We have 0.45. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::GetArgs::Argv Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz ---- Perinci::Sub::Util [requires] Running test for module 'Perinci::Sub::Util' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Util-0.46.tar.gz ok Perinci-Sub-Util-0.46/ Perinci-Sub-Util-0.46/README Perinci-Sub-Util-0.46/dist.ini Perinci-Sub-Util-0.46/Makefile.PL Perinci-Sub-Util-0.46/META.yml Perinci-Sub-Util-0.46/t/ Perinci-Sub-Util-0.46/t/err.t Perinci-Sub-Util-0.46/t/caller.t Perinci-Sub-Util-0.46/t/Args.t Perinci-Sub-Util-0.46/t/author-pod-syntax.t Perinci-Sub-Util-0.46/t/release-rinci.t Perinci-Sub-Util-0.46/t/00-compile.t Perinci-Sub-Util-0.46/t/gen_modified_sub.t Perinci-Sub-Util-0.46/t/gen_curried_sub.t Perinci-Sub-Util-0.46/t/author-pod-coverage.t Perinci-Sub-Util-0.46/weaver.ini Perinci-Sub-Util-0.46/META.json Perinci-Sub-Util-0.46/MANIFEST Perinci-Sub-Util-0.46/lib/ Perinci-Sub-Util-0.46/lib/Perinci/ Perinci-Sub-Util-0.46/lib/Perinci/Sub/ Perinci-Sub-Util-0.46/lib/Perinci/Sub/Util.pm Perinci-Sub-Util-0.46/lib/Perinci/Sub/Util/ Perinci-Sub-Util-0.46/lib/Perinci/Sub/Util/ResObj.pm Perinci-Sub-Util-0.46/lib/Perinci/Sub/Util/Sort.pm Perinci-Sub-Util-0.46/lib/Perinci/Sub/Util/Args.pm Perinci-Sub-Util-0.46/LICENSE Perinci-Sub-Util-0.46/Changes Configuring P/PE/PERLANCAR/Perinci-Sub-Util-0.46.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Util Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Util-0.46.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Util-0.46.tar.gz >>> make cp lib/Perinci/Sub/Util.pm blib/lib/Perinci/Sub/Util.pm cp lib/Perinci/Sub/Util/ResObj.pm blib/lib/Perinci/Sub/Util/ResObj.pm cp lib/Perinci/Sub/Util/Sort.pm blib/lib/Perinci/Sub/Util/Sort.pm cp lib/Perinci/Sub/Util/Args.pm blib/lib/Perinci/Sub/Util/Args.pm Manifying 4 pod documents PERLANCAR/Perinci-Sub-Util-0.46.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..4 ok 1 - Perinci/Sub/Util.pm loaded ok ok 2 - Perinci/Sub/Util/Args.pm loaded ok ok 3 - Perinci/Sub/Util/ResObj.pm loaded ok ok 4 - Perinci/Sub/Util/Sort.pm loaded ok ok t/Args.t ................. # Subtest: args_by_tag ok 1 ok 2 ok 3 ok 4 ok 5 1..5 ok 1 - args_by_tag # Subtest: argnames_by_tag ok 1 ok 2 ok 3 ok 4 1..4 ok 2 - argnames_by_tag # Subtest: func_args_by_tag ok 1 1..1 ok 3 - func_args_by_tag # Subtest: func_argnames_by_tag ok 1 1..1 ok 4 - func_argnames_by_tag # Subtest: call_with_its_args ok 1 1..1 ok 5 - call_with_its_args 1..5 ok t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Util-0.46-XEOwwN/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-Util-0.46-XEOwwN/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. t/caller.t ............... Dubious, test returned 2 (wstat 512, 0x200) No subtests run t/err.t .................. # Subtest: defaults ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message ok 6 - result ok 7 - result metadata is hash 1..7 ok 1 - defaults # Subtest: set status ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 400 1..4 ok 2 - set status # Subtest: set message ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message 1..5 ok 3 - set message # Subtest: set prev ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 400 ok 5 - message ok 6 - prev 1..6 ok 4 - set prev # Subtest: caller ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - message ok 6 - log[0] type ok 7 - log[0] time ok 8 - log[0] package ok 9 - log[0] func ok 10 - log[0] line 1..10 ok 5 - caller # Subtest: stack_trace ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 500 ok 5 - stack_trace 1..5 ok 6 - stack_trace # Subtest: stack_trace only produced once ok 1 - func doesn't die ok 2 - result is defined ok 3 - result is an array ok 4 - status is 501 ok 5 - stack_trace 1..5 ok 7 - stack_trace only produced once 1..7 ok t/gen_curried_sub.t ...... ok 1 1..1 ok t/gen_modified_sub.t ..... ok 1 ok 2 1..2 ok t/release-rinci.t ........ skipped: these tests are for release candidate testing Test Summary Report ------------------- t/caller.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=9, Tests=19, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.20 cusr 0.06 csys = 0.31 CPU) Result: FAIL Failed 1/9 test programs. 0/19 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-Util-0.46.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-Util-0.46.tar.gz PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.81-5Ftx9D PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz Has already been prepared Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz Warning: Prerequisite 'Perinci::Sub::Util => 0.46' for 'PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz' failed when processing 'PERLANCAR/Perinci-Sub-Util-0.46.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Perinci/Sub/GetArgs/Argv.pm blib/lib/Perinci/Sub/GetArgs/Argv.pm Manifying 1 pod document PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ....................................... 1..1 ok 1 - Perinci/Sub/GetArgs/Argv.pm loaded ok ok t/_is_simple_or_array_of_simple_or_hash_of_simple.t .. # Subtest: simple # Subtest: simple type ok 1 - result 1..1 ok 1 - simple type # Subtest: based on simple type ok 1 - result 1..1 ok 2 - based on simple type # Subtest: non-simple type ok 1 - result 1..1 ok 3 - non-simple type # Subtest: coercible from simple type ok 1 - result 1..1 ok 4 - coercible from simple type 1..4 ok 1 - simple # Subtest: array of simple # Subtest: array without element schema ok 1 - result 1..1 ok 1 - array without element schema # Subtest: based on simple types ok 1 - result 1..1 ok 2 - based on simple types # Subtest: array of (simple types) ok 1 - result 1..1 ok 3 - array of (simple types) # Subtest: array of (based on simple types) ok 1 - result 1..1 ok 4 - array of (based on simple types) # Subtest: array of (non-simple types) ok 1 - result 1..1 ok 5 - array of (non-simple types) # Subtest: array of (coercible from simple type) ok 1 - result 1..1 ok 6 - array of (coercible from simple type) 1..6 ok 2 - array of simple # Subtest: hash of simple # Subtest: hash without element schema ok 1 - result 1..1 ok 1 - hash without element schema # Subtest: based on simple types ok 1 - result 1..1 ok 2 - based on simple types # Subtest: hash of (simple types) ok 1 - result 1..1 ok 3 - hash of (simple types) # Subtest: hash of (based on simple types) ok 1 - result 1..1 ok 4 - hash of (based on simple types) # Subtest: hash of (non-simple types) ok 1 - result 1..1 ok 5 - hash of (non-simple types) # Subtest: hash of (coercible from simple type) ok 1 - result 1..1 ok 6 - hash of (coercible from simple type) 1..6 ok 3 - hash of simple 1..3 ok t/author-pod-coverage.t .............................. skipped: these tests are for testing by the author t/author-pod-syntax.t ................................ skipped: these tests are for testing by the author Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.81-5Ftx9D/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.81-5Ftx9D/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. t/gen_getopt_long_spec_from_meta.t ................... Dubious, test returned 2 (wstat 512, 0x200) No subtests run Can't locate Sah/Schema/rinci/function_meta.pm in @INC (you may need to install the Sah::Schema::rinci::function_meta module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.81-5Ftx9D/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Perinci-Sub-GetArgs-Argv-0.81-5Ftx9D/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Perinci/Sub/Normalize.pm line 144. # Child (optional missing = ok) exited without calling finalize() # Failed test 'optional missing = ok' # at /Users/fly2200/cpanfly-5.22/var/megalib/Test/Builder.pm line 279. # Tests were run but no plan was declared and done_testing() was not seen. # Looks like your test exited with 2 just after 1. t/get_args_from_argv.t ............................... # Subtest: optional missing = ok not ok 1 - optional missing = ok Dubious, test returned 2 (wstat 512, 0x200) Failed 1/1 subtests t/release-rinci.t .................................... skipped: these tests are for release candidate testing Test Summary Report ------------------- t/gen_getopt_long_spec_from_meta.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: No plan found in TAP output t/get_args_from_argv.t (Wstat: 512 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 2 Parse errors: No plan found in TAP output Files=7, Tests=5, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.14 cusr 0.04 csys = 0.21 CPU) Result: FAIL Failed 2/7 test programs. 1/5 subtests failed. make: *** [test_dynamic] Error 255 PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports PERLANCAR/Perinci-Sub-GetArgs-Argv-0.81.tar.gz Finished 2017-06-02T00:33:25