PATH=/usr/bin:/bin:/Users/fly2200/cpanfly-5.22/var/megalib/bin Start 2017-02-03T01:45:41 ActivePerl-2200 CPAN-2.10 Reading '/Users/fly2200/cpanfly-5.22/var/cpan/Metadata' Database was generated on Thu, 02 Feb 2017 05:41:02 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/T/TM/TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/T/TM/TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz ok Device-WebIO-PCDuino-0.002 Device-WebIO-PCDuino-0.002/TODO Device-WebIO-PCDuino-0.002/LICENSE Device-WebIO-PCDuino-0.002/dist.ini Device-WebIO-PCDuino-0.002/MANIFEST Device-WebIO-PCDuino-0.002/CHANGELOG Device-WebIO-PCDuino-0.002/META.json Device-WebIO-PCDuino-0.002/t Device-WebIO-PCDuino-0.002/t/002_pod.t Device-WebIO-PCDuino-0.002/Makefile.PL Device-WebIO-PCDuino-0.002/t/001_load.t Device-WebIO-PCDuino-0.002/lib/Device/WebIO Device-WebIO-PCDuino-0.002/lib/Device/WebIO/PCDuino.pm Configuring T/TM/TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Warning: prerequisite Device::WebIO 0.002 not found. Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Device::WebIO::PCDuino Writing MYMETA.yml and MYMETA.json TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for T/TM/TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz ---- Unsatisfied dependencies detected during ---- ---- TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz ---- Device::WebIO [requires] Running test for module 'Device::WebIO' Checksum for /Users/fly2200/cpanfly-5.22/var/cpan/sources/authors/id/T/TM/TMURRAY/Device-WebIO-0.010.tar.gz ok Device-WebIO-0.010/ Device-WebIO-0.010/MANIFEST Device-WebIO-0.010/lib/ Device-WebIO-0.010/lib/Device/ Device-WebIO-0.010/lib/Device/WebIO.pm Device-WebIO-0.010/lib/Device/WebIO/ Device-WebIO-0.010/lib/Device/WebIO/Device.pm Device-WebIO-0.010/lib/Device/WebIO/Device/ Device-WebIO-0.010/lib/Device/WebIO/Device/PWM.pm Device-WebIO-0.010/lib/Device/WebIO/Device/VideoOutput.pm Device-WebIO-0.010/lib/Device/WebIO/Device/I2CUser.pm Device-WebIO-0.010/lib/Device/WebIO/Device/DigitalInputCallback.pm Device-WebIO-0.010/lib/Device/WebIO/Device/OneWire.pm Device-WebIO-0.010/lib/Device/WebIO/Device/Serial.pm Device-WebIO-0.010/lib/Device/WebIO/Device/I2CProvider.pm Device-WebIO-0.010/lib/Device/WebIO/Device/StillImageOutput.pm Device-WebIO-0.010/lib/Device/WebIO/Device/SPI.pm Device-WebIO-0.010/lib/Device/WebIO/Device/VideoOutputCallback.pm Device-WebIO-0.010/lib/Device/WebIO/Device/TempSensor.pm Device-WebIO-0.010/lib/Device/WebIO/Device/DigitalInput.pm Device-WebIO-0.010/lib/Device/WebIO/Device/DigitalOutput.pm Device-WebIO-0.010/lib/Device/WebIO/Device/ADC.pm Device-WebIO-0.010/lib/Device/WebIO/Exceptions.pm Device-WebIO-0.010/examples/ Device-WebIO-0.010/examples/rpi_firmata_link_blink.pl Device-WebIO-0.010/META.json Device-WebIO-0.010/LICENSE Device-WebIO-0.010/t_data/ Device-WebIO-0.010/t_data/test.jpg Device-WebIO-0.010/t_data/wumpus_video_dump.h264 Device-WebIO-0.010/TODO Device-WebIO-0.010/README Device-WebIO-0.010/CHANGELOG Device-WebIO-0.010/Makefile.PL Device-WebIO-0.010/dist.ini Device-WebIO-0.010/t/ Device-WebIO-0.010/t/030_adc_input.t Device-WebIO-0.010/t/lib/ Device-WebIO-0.010/t/lib/MockVideoOutput.pm Device-WebIO-0.010/t/lib/MockDigitalInputCallback.pm Device-WebIO-0.010/t/lib/MockADCInput.pm Device-WebIO-0.010/t/lib/MockPWMOutput.pm Device-WebIO-0.010/t/lib/MockDigitalInput.pm Device-WebIO-0.010/t/lib/MockTempSensor.pm Device-WebIO-0.010/t/lib/MockDigitalInputOutput.pm Device-WebIO-0.010/t/lib/MockDigitalOutput.pm Device-WebIO-0.010/t/lib/MockVideoOutputCallback.pm Device-WebIO-0.010/t/lib/MockStillImageOutput.pm Device-WebIO-0.010/t/lib/MockI2CUser.pm Device-WebIO-0.010/t/lib/MockI2CProvider.pm Device-WebIO-0.010/t/lib/MockSPI.pm Device-WebIO-0.010/t/100_temp_sensors.t Device-WebIO-0.010/t/080_still_image_output.t Device-WebIO-0.010/t/040_pwm_output.t Device-WebIO-0.010/t/010_digital_input.t Device-WebIO-0.010/t/110_digital_input_callback.t Device-WebIO-0.010/t/060_video_output.t Device-WebIO-0.010/t/001_load.t Device-WebIO-0.010/t/090_i2c.t Device-WebIO-0.010/t/130_spi.t Device-WebIO-0.010/t/200_two_types_one_obj.t Device-WebIO-0.010/t/120_video_output_callback.t Device-WebIO-0.010/t/070_description.t Device-WebIO-0.010/t/020_digital_output.t Device-WebIO-0.010/t/002_pod.t Configuring T/TM/TMURRAY/Device-WebIO-0.010.tar.gz with Makefile.PL >>> /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2200/cpanfly-5.22/var/megalib Want /Users/fly2200/ap2200-299195/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Device::WebIO Writing MYMETA.yml and MYMETA.json TMURRAY/Device-WebIO-0.010.tar.gz /Users/fly2200/ap2200-299195/bin/perl-dynamic Makefile.PL -- OK Running make for T/TM/TMURRAY/Device-WebIO-0.010.tar.gz >>> make cp lib/Device/WebIO/Exceptions.pm blib/lib/Device/WebIO/Exceptions.pm cp lib/Device/WebIO/Device.pm blib/lib/Device/WebIO/Device.pm cp lib/Device/WebIO.pm blib/lib/Device/WebIO.pm cp lib/Device/WebIO/Device/DigitalInput.pm blib/lib/Device/WebIO/Device/DigitalInput.pm cp lib/Device/WebIO/Device/DigitalInputCallback.pm blib/lib/Device/WebIO/Device/DigitalInputCallback.pm cp lib/Device/WebIO/Device/OneWire.pm blib/lib/Device/WebIO/Device/OneWire.pm cp lib/Device/WebIO/Device/ADC.pm blib/lib/Device/WebIO/Device/ADC.pm cp lib/Device/WebIO/Device/VideoOutputCallback.pm blib/lib/Device/WebIO/Device/VideoOutputCallback.pm cp lib/Device/WebIO/Device/PWM.pm blib/lib/Device/WebIO/Device/PWM.pm cp lib/Device/WebIO/Device/VideoOutput.pm blib/lib/Device/WebIO/Device/VideoOutput.pm cp lib/Device/WebIO/Device/I2CProvider.pm blib/lib/Device/WebIO/Device/I2CProvider.pm cp lib/Device/WebIO/Device/StillImageOutput.pm blib/lib/Device/WebIO/Device/StillImageOutput.pm cp lib/Device/WebIO/Device/I2CUser.pm blib/lib/Device/WebIO/Device/I2CUser.pm cp lib/Device/WebIO/Device/DigitalOutput.pm blib/lib/Device/WebIO/Device/DigitalOutput.pm cp lib/Device/WebIO/Device/Serial.pm blib/lib/Device/WebIO/Device/Serial.pm cp lib/Device/WebIO/Device/SPI.pm blib/lib/Device/WebIO/Device/SPI.pm cp lib/Device/WebIO/Device/TempSensor.pm blib/lib/Device/WebIO/Device/TempSensor.pm Manifying 13 pod documents TMURRAY/Device-WebIO-0.010.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use Device::WebIO;' # at t/001_load.t line 28. # Tried to use 'Device::WebIO'. # Error: Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. # BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. # Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. # Compilation failed in require at t/001_load.t line 28. # BEGIN failed--compilation aborted at t/001_load.t line 28. # Failed test 'use Device::WebIO::Device::I2CUser;' # at t/001_load.t line 37. # Tried to use 'Device::WebIO::Device::I2CUser'. # Error: Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Accessor.pm line 7. # BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Accessor.pm line 7. # Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo/Role.pm line 73. # Compilation failed in require at t/001_load.t line 37. # BEGIN failed--compilation aborted at t/001_load.t line 37. # Looks like you failed 2 tests of 14. t/001_load.t .................... 1..14 ok 1 - use Device::WebIO::Exceptions; not ok 2 - use Device::WebIO; ok 3 - use Device::WebIO::Device; ok 4 - use Device::WebIO::Device::DigitalInput; ok 5 - use Device::WebIO::Device::DigitalOutput; ok 6 - use Device::WebIO::Device::DigitalInputCallback; ok 7 - use Device::WebIO::Device::ADC; ok 8 - use Device::WebIO::Device::PWM; ok 9 - use Device::WebIO::Device::SPI; ok 10 - use Device::WebIO::Device::I2CProvider; not ok 11 - use Device::WebIO::Device::I2CUser; ok 12 - use Device::WebIO::Device::Serial; ok 13 - use Device::WebIO::Device::OneWire; ok 14 - use Device::WebIO::Device::VideoOutput; Dubious, test returned 2 (wstat 512, 0x200) Failed 2/14 subtests t/002_pod.t ..................... 1..17 ok 1 - POD test for lib/Device/WebIO.pm ok 2 - POD test for lib/Device/WebIO/Device.pm ok 3 - POD test for lib/Device/WebIO/Exceptions.pm (no pod) ok 4 - POD test for lib/Device/WebIO/Device/ADC.pm ok 5 - POD test for lib/Device/WebIO/Device/DigitalInput.pm ok 6 - POD test for lib/Device/WebIO/Device/DigitalInputCallback.pm ok 7 - POD test for lib/Device/WebIO/Device/DigitalOutput.pm ok 8 - POD test for lib/Device/WebIO/Device/I2CProvider.pm ok 9 - POD test for lib/Device/WebIO/Device/I2CUser.pm ok 10 - POD test for lib/Device/WebIO/Device/OneWire.pm (no pod) ok 11 - POD test for lib/Device/WebIO/Device/PWM.pm (no pod) ok 12 - POD test for lib/Device/WebIO/Device/Serial.pm (no pod) ok 13 - POD test for lib/Device/WebIO/Device/SPI.pm ok 14 - POD test for lib/Device/WebIO/Device/StillImageOutput.pm ok 15 - POD test for lib/Device/WebIO/Device/TempSensor.pm ok 16 - POD test for lib/Device/WebIO/Device/VideoOutput.pm ok 17 - POD test for lib/Device/WebIO/Device/VideoOutputCallback.pm ok Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/010_digital_input.t line 27. BEGIN failed--compilation aborted at t/010_digital_input.t line 27. # Looks like your test exited with 2 before it could output anything. t/010_digital_input.t ........... 1..12 Dubious, test returned 2 (wstat 512, 0x200) Failed 12/12 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/020_digital_output.t line 27. BEGIN failed--compilation aborted at t/020_digital_output.t line 27. # Looks like your test exited with 2 before it could output anything. t/020_digital_output.t .......... 1..13 Dubious, test returned 2 (wstat 512, 0x200) Failed 13/13 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/030_adc_input.t line 27. BEGIN failed--compilation aborted at t/030_adc_input.t line 27. # Looks like your test exited with 2 before it could output anything. t/030_adc_input.t ............... 1..20 Dubious, test returned 2 (wstat 512, 0x200) Failed 20/20 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/040_pwm_output.t line 27. BEGIN failed--compilation aborted at t/040_pwm_output.t line 27. # Looks like your test exited with 2 before it could output anything. t/040_pwm_output.t .............. 1..13 Dubious, test returned 2 (wstat 512, 0x200) Failed 13/13 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/060_video_output.t line 27. BEGIN failed--compilation aborted at t/060_video_output.t line 27. # Looks like your test exited with 2 before it could output anything. t/060_video_output.t ............ 1..13 Dubious, test returned 2 (wstat 512, 0x200) Failed 13/13 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/070_description.t line 27. BEGIN failed--compilation aborted at t/070_description.t line 27. # Looks like your test exited with 2 before it could output anything. t/070_description.t ............. 1..3 Dubious, test returned 2 (wstat 512, 0x200) Failed 3/3 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/080_still_image_output.t line 27. BEGIN failed--compilation aborted at t/080_still_image_output.t line 27. # Looks like your test exited with 2 before it could output anything. t/080_still_image_output.t ...... 1..9 Dubious, test returned 2 (wstat 512, 0x200) Failed 9/9 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/090_i2c.t line 27. BEGIN failed--compilation aborted at t/090_i2c.t line 27. # Looks like your test exited with 2 before it could output anything. t/090_i2c.t ..................... 1..2 Dubious, test returned 2 (wstat 512, 0x200) Failed 2/2 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/100_temp_sensors.t line 27. BEGIN failed--compilation aborted at t/100_temp_sensors.t line 27. # Looks like your test exited with 2 before it could output anything. t/100_temp_sensors.t ............ 1..6 Dubious, test returned 2 (wstat 512, 0x200) Failed 6/6 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/110_digital_input_callback.t line 27. BEGIN failed--compilation aborted at t/110_digital_input_callback.t line 27. # Looks like your test exited with 2 before it could output anything. t/110_digital_input_callback.t .. 1..16 Dubious, test returned 2 (wstat 512, 0x200) Failed 16/16 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/120_video_output_callback.t line 27. BEGIN failed--compilation aborted at t/120_video_output_callback.t line 27. # Looks like your test exited with 2 before it could output anything. t/120_video_output_callback.t ... 1..5 Dubious, test returned 2 (wstat 512, 0x200) Failed 5/5 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/130_spi.t line 27. BEGIN failed--compilation aborted at t/130_spi.t line 27. # Looks like your test exited with 2 before it could output anything. t/130_spi.t ..................... 1..3 Dubious, test returned 2 (wstat 512, 0x200) Failed 3/3 subtests Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: t/lib/ /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-0.010-f3JGom/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. Compilation failed in require at t/200_two_types_one_obj.t line 27. BEGIN failed--compilation aborted at t/200_two_types_one_obj.t line 27. # Looks like your test exited with 2 before it could output anything. t/200_two_types_one_obj.t ....... 1..12 Dubious, test returned 2 (wstat 512, 0x200) Failed 12/12 subtests Test Summary Report ------------------- t/001_load.t (Wstat: 512 Tests: 14 Failed: 2) Failed tests: 2, 11 Non-zero exit status: 2 t/010_digital_input.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 12 tests but ran 0. t/020_digital_output.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 13 tests but ran 0. t/030_adc_input.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 20 tests but ran 0. t/040_pwm_output.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 13 tests but ran 0. t/060_video_output.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 13 tests but ran 0. t/070_description.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 3 tests but ran 0. t/080_still_image_output.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 9 tests but ran 0. t/090_i2c.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 2 tests but ran 0. t/100_temp_sensors.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 6 tests but ran 0. t/110_digital_input_callback.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 16 tests but ran 0. t/120_video_output_callback.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 5 tests but ran 0. t/130_spi.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 3 tests but ran 0. t/200_two_types_one_obj.t (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 12 tests but ran 0. Files=15, Tests=31, 2 wallclock secs ( 0.05 usr 0.02 sys + 0.61 cusr 0.11 csys = 0.79 CPU) Result: FAIL Failed 14/15 test programs. 2/31 subtests failed. make: *** [test_dynamic] Error 2 TMURRAY/Device-WebIO-0.010.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports TMURRAY/Device-WebIO-0.010.tar.gz TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz Has already been unwrapped into directory /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-PCDuino-0.002-sQGtXq TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz Has already been prepared Running make for T/TM/TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz Warning: Prerequisite 'Device::WebIO => 0.002' for 'TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz' failed when processing 'TMURRAY/Device-WebIO-0.010.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Device/WebIO/PCDuino.pm blib/lib/Device/WebIO/PCDuino.pm Manifying 1 pod document TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2200/ap2200-299195/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use Device::WebIO::PCDuino;' # at t/001_load.t line 27. # Tried to use 'Device::WebIO::PCDuino'. # Error: Can't locate Sub/Quote.pm in @INC (you may need to install the Sub::Quote module) (@INC contains: /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-PCDuino-0.002-sQGtXq/blib/lib /Users/fly2200/cpanfly-5.22/var/tmp/cpan_build/Device-WebIO-PCDuino-0.002-sQGtXq/blib/arch /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/cpanfly-5.22/var/megalib /Users/fly2200/Library/ActivePerl-5.22/lib /Users/fly2200/ap2200-299195/site/lib /Users/fly2200/ap2200-299195/lib .) at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. # BEGIN failed--compilation aborted at /Users/fly2200/cpanfly-5.22/var/megalib/Method/Generate/Constructor.pm line 4. # Compilation failed in require at /Users/fly2200/cpanfly-5.22/var/megalib/Moo.pm line 170. # Compilation failed in require at t/001_load.t line 27. # BEGIN failed--compilation aborted at t/001_load.t line 27. # Looks like you failed 1 test of 1. t/001_load.t .. 1..1 not ok 1 - use Device::WebIO::PCDuino; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/002_pod.t ... 1..1 ok 1 - POD test for lib/Device/WebIO/PCDuino.pm ok Test Summary Report ------------------- t/001_load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=2, Tests=2, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr 0.01 csys = 0.11 CPU) Result: FAIL Failed 1/2 test programs. 1/2 subtests failed. make: *** [test_dynamic] Error 255 TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz one dependency not OK (Device::WebIO); additionally test harness failed make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports TMURRAY/Device-WebIO-PCDuino-0.002.tar.gz Finished 2017-02-03T01:45:48