PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin
Start 2016-10-22T08:59:08
ActivePerl-2400 CPAN-2.10
Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata'
  Database was generated on Sat, 22 Oct 2016 02:29:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/G/GR/GRYPHON/Auth-GoogleAuth-1.01.tar.gz
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/G/GR/GRYPHON/Auth-GoogleAuth-1.01.tar.gz ok
Auth-GoogleAuth-1.01/
Auth-GoogleAuth-1.01/Changes
Auth-GoogleAuth-1.01/Makefile.PL
Auth-GoogleAuth-1.01/cpanfile
Auth-GoogleAuth-1.01/META.json
Auth-GoogleAuth-1.01/MANIFEST
Auth-GoogleAuth-1.01/lib/
Auth-GoogleAuth-1.01/lib/Auth/
Auth-GoogleAuth-1.01/lib/Auth/GoogleAuth.pm
Auth-GoogleAuth-1.01/META.yml
Auth-GoogleAuth-1.01/t/
Auth-GoogleAuth-1.01/t/00-compile.t
Auth-GoogleAuth-1.01/t/release-pod-syntax.t
Auth-GoogleAuth-1.01/t/release-kwalitee.t
Auth-GoogleAuth-1.01/t/author-eol.t
Auth-GoogleAuth-1.01/t/module.t
Auth-GoogleAuth-1.01/t/release-portability.t
Auth-GoogleAuth-1.01/t/author-no-tabs.t
Auth-GoogleAuth-1.01/t/release-synopsis.t
Auth-GoogleAuth-1.01/t/release-pod-coverage.t
Auth-GoogleAuth-1.01/LICENSE
Auth-GoogleAuth-1.01/README
Configuring G/GR/GRYPHON/Auth-GoogleAuth-1.01.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Auth::GoogleAuth
Writing MYMETA.yml and MYMETA.json
  GRYPHON/Auth-GoogleAuth-1.01.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for G/GR/GRYPHON/Auth-GoogleAuth-1.01.tar.gz
>>> make
cp lib/Auth/GoogleAuth.pm blib/lib/Auth/GoogleAuth.pm
Manifying 1 pod document
  GRYPHON/Auth-GoogleAuth-1.01.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..1
ok 1 - Auth/GoogleAuth.pm loaded ok
ok
t/author-eol.t ............ skipped: these tests are for testing by the author
t/author-no-tabs.t ........ skipped: these tests are for testing by the author
t/module.t ................ 
ok 1 - use Auth::GoogleAuth;
ok 2 - require Auth::GoogleAuth;
ok 3 - Auth::GoogleAuth->new()
ok 4 - ref $object
ok 5 - generate_secret32() length and content
ok 6 - generate_secret32() stored as secret32()
ok 7 - new({...})
ok 8 - secret set in instantiator
ok 9 - secret32 set in instantiator
ok 10 - issuer set in instantiator
ok 11 - key_id set in instantiator
ok 12 - clear
ok 13 - secret unset after clear
ok 14 - secret32 unset after clear
ok 15 - issuer unset after clear
ok 16 - key_id unset after clear
ok 17 - qr_code from clear state
ok 18 - qr_code from specific state
ok 19 - qr_code otpauth from specific state
ok 20 - code()
ok 21 - code( $s32, $time )
ok 22 - code( $s32, $time, 30 )
ok 23 - code() again
ok 24 - verify(tight) works
ok 25 - verify(tight, mis-time) fails
ok 26 - verify(loose, mis-time) works
ok 27 - verify(loose, mis-time++) fails
ok 28 - verify(looser, mis-time++) works
1..28
ok
t/release-kwalitee.t ...... skipped: these tests are for release candidate testing
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-portability.t ... skipped: these tests are for release candidate testing
t/release-synopsis.t ...... skipped: these tests are for release candidate testing
All tests successful.
Files=9, Tests=29,  1 wallclock secs ( 0.04 usr  0.02 sys +  0.51 cusr  0.10 csys =  0.67 CPU)
Result: PASS
  GRYPHON/Auth-GoogleAuth-1.01.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Auth-GoogleAuth" VERSION="1.01" DATE="2015-08-04">
  <AUTHOR CPAN="GRYPHON">Gryphon Shafer &lt;gryphon@cpan.org></AUTHOR>
  <ABSTRACT>Google Authenticator TBOT Abstraction</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.24"/>
  <CODEBASE HREF="Auth-GoogleAuth-1.01.tar.gz"/>
  <PROVIDE NAME="Auth::GoogleAuth" VERSION="1.01"/>
  <REQUIRE NAME="Carp::"/>
  <REQUIRE NAME="Class::Accessor"/>
  <REQUIRE NAME="Convert::Base32"/>
  <REQUIRE NAME="Digest::HMAC_SHA1"/>
  <REQUIRE NAME="Math::Random::MT"/>
  <REQUIRE NAME="URI::Escape"/>
  <REQUIRE NAME="base::"/>
  <REQUIRE NAME="strict::"/>
  <REQUIRE NAME="warnings::"/>
  <!-- Built 2016-10-22 with ActivePerl-2400 on perl-osx (Mac OS X 10.9.5) log Auth-GoogleAuth-1.01.d/log-20161022T085908.txt -->
</SOFTPKG>
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Auth-GoogleAuth-1.01-EP3yeu && tar cvf - Auth-GoogleAuth-1.01.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/G/GR/GRYPHON/Auth-GoogleAuth-1.01.tar.gz
Auth-GoogleAuth-1.01.ppd
blib/
blib/lib/
blib/lib/Auth/
blib/lib/Auth/GoogleAuth.pm
blib/man3/
blib/man3/Auth::GoogleAuth.3
Finished 2016-10-22T08:59:12