PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin
Start 2016-10-21T12:37:15
ActivePerl-2400 CPAN-2.10
Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata'
Database was generated on Fri, 21 Oct 2016 05:17:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/L/LE/LEADER/Crypt-LE-0.19.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/L/LE/LEADER/CHECKSUMS
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/L/LE/LEADER/Crypt-LE-0.19.tar.gz ok
Crypt-LE-0.19
Crypt-LE-0.19/META.json
Crypt-LE-0.19/Changes
Crypt-LE-0.19/Makefile.PL
Crypt-LE-0.19/README.md
Crypt-LE-0.19/MANIFEST
Crypt-LE-0.19/LICENSE
Crypt-LE-0.19/README
Crypt-LE-0.19/META.yml
Crypt-LE-0.19/script
Crypt-LE-0.19/script/le.pl
Crypt-LE-0.19/lib
Crypt-LE-0.19/lib/Crypt
Crypt-LE-0.19/lib/Crypt/LE.pm
Crypt-LE-0.19/lib/Crypt/LE
Crypt-LE-0.19/lib/Crypt/LE/Complete
Crypt-LE-0.19/lib/Crypt/LE/Complete/Simple.pm
Crypt-LE-0.19/lib/Crypt/LE/Challenge
Crypt-LE-0.19/lib/Crypt/LE/Challenge/Simple.pm
Crypt-LE-0.19/t
Crypt-LE-0.19/t/00-load.t
Crypt-LE-0.19/t/01-setup.t
Crypt-LE-0.19/t/02-workflow.t
Configuring L/LE/LEADER/Crypt-LE-0.19.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Crypt::LE
Writing MYMETA.yml and MYMETA.json
LEADER/Crypt-LE-0.19.tar.gz
/Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for L/LE/LEADER/Crypt-LE-0.19.tar.gz
---- Unsatisfied dependencies detected during ----
---- LEADER/Crypt-LE-0.19.tar.gz ----
Crypt::PKCS10 [requires]
Running test for module 'Crypt::PKCS10'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/T/TL/TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/T/TL/TLHACKQUE/CHECKSUMS
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/T/TL/TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz ok
Crypt-PKCS10-1.8002/
Crypt-PKCS10-1.8002/README.md
Crypt-PKCS10-1.8002/LICENSE
Crypt-PKCS10-1.8002/SIGNATURE
Crypt-PKCS10-1.8002/xt/
Crypt-PKCS10-1.8002/xt/01_Kwalitee.t
Crypt-PKCS10-1.8002/META.json
Crypt-PKCS10-1.8002/lib/
Crypt-PKCS10-1.8002/lib/Crypt/
Crypt-PKCS10-1.8002/lib/Crypt/PKCS10.pm
Crypt-PKCS10-1.8002/Commitlog
Crypt-PKCS10-1.8002/weaver.ini
Crypt-PKCS10-1.8002/dist.ini
Crypt-PKCS10-1.8002/runbrew
Crypt-PKCS10-1.8002/examples/
Crypt-PKCS10-1.8002/examples/verify_csr
Crypt-PKCS10-1.8002/examples/dump_csr
Crypt-PKCS10-1.8002/META.yml
Crypt-PKCS10-1.8002/MANIFEST
Crypt-PKCS10-1.8002/makefile_test_ssl
Crypt-PKCS10-1.8002/t/
Crypt-PKCS10-1.8002/t/00-report-prereqs.t
Crypt-PKCS10-1.8002/t/csr5.pem
Crypt-PKCS10-1.8002/t/02_base.t
Crypt-PKCS10-1.8002/t/03_ecc.t
Crypt-PKCS10-1.8002/t/csr4.pem
Crypt-PKCS10-1.8002/t/csr2.pem
Crypt-PKCS10-1.8002/t/csr6.pem
Crypt-PKCS10-1.8002/t/author-critic.t
Crypt-PKCS10-1.8002/t/csr1.pem
Crypt-PKCS10-1.8002/t/csr1.cer
Crypt-PKCS10-1.8002/t/csr8.pem
Crypt-PKCS10-1.8002/t/00-report-prereqs.dd
Crypt-PKCS10-1.8002/t/author-pod-syntax.t
Crypt-PKCS10-1.8002/t/0-signature.t
Crypt-PKCS10-1.8002/t/csr3.cer
Crypt-PKCS10-1.8002/t/csr7.pem
Crypt-PKCS10-1.8002/BUILD
Crypt-PKCS10-1.8002/Makefile.PL
Crypt-PKCS10-1.8002/Changes
Crypt-PKCS10-1.8002/README
Configuring T/TL/TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking crypto modules' operation with OpenSSL library ... DSA+ RSA+ ECC+ ... OK
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Crypt::PKCS10
Writing MYMETA.yml and MYMETA.json
TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz
/Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for T/TL/TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz
>>> make
cp lib/Crypt/PKCS10.pm blib/lib/Crypt/PKCS10.pm
Manifying 1 pod document
TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/0-signature.t ........ skipped: Set the environment variable TEST_SIGNATURE to enable this test.
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have
# ------------------- ----------- ---------
# ExtUtils::MakeMaker any 7.16
# Text::Wrap 2005.082401 2013.0523
#
# === Configure Recommends ===
#
# Module Want Have
# ------------------- ----- -----
# Crypt::OpenSSL::DSA 0.15 0.15
# Crypt::OpenSSL::RSA 0.28 0.28
# Crypt::PK::ECC 0.041 undef
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.16
#
# === Test Requires ===
#
# Module Want Have
# ------------------- ----------- ---------
# ExtUtils::MakeMaker any 7.16
# File::Spec any 3.62
# Module::Signature any 0.80
# Socket any 2.021
# Test::More 0.94 1.302062
# Text::Wrap 2005.082401 2013.0523
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.150005
#
# === Runtime Requires ===
#
# Module Want Have
# ------------- ---- ----
# Carp any 1.40
# Convert::ASN1 0.27 0.27
# Digest::MD2 2.03 2.04
# Digest::MD4 1.5 1.9
# Digest::MD5 2.51 2.55
# Digest::SHA 5.95 5.95
# Encode any 2.84
# MIME::Base64 any 3.15
# Scalar::Util any 1.45
# bytes any 1.05
# overload any 1.26
# strict any 1.11
# warnings any 1.36
#
# === Runtime Recommends ===
#
# Module Want Have
# ------------------- ----- -----
# Crypt::OpenSSL::DSA 0.15 0.15
# Crypt::OpenSSL::RSA 0.28 0.28
# Crypt::PK::ECC 0.041 undef
#
t/00-report-prereqs.t ..
1..1
ok 1
ok
# Perl /Users/fly2400/ap2400-300558/bin/perl-dynamic version 5.24.0
# OpenSSL 0.9.8zg 14 July 2015
# built on: Jul 19 2015
# platform: darwin64-x86_64-llvm
# options: bn(64,64) md2(int) rc4(ptr,char) des(idx,cisc,16,int) blowfish(idx)
# compiler: -arch x86_64 -fmessage-length=0 -pipe -Wno-trigraphs -fpascal-strings
# -fasm-blocks -O3 -D_REENTRANT -DDSO_DLFCN
# -DHAVE_DLFCN_H -DL_ENDIAN -DMD32_REG_T=int
# -DOPENSSL_NO_IDEA -DOPENSSL_PIC -DOPENSSL_THREADS
# -DZLIB -mmacosx-version-min=10.6
# OPENSSLDIR: "/System/Library/OpenSSL"
# ciphers: AES128-SHA AES256-SHA DES-CBC-MD5 DES-CBC-SHA DES-CBC3-MD5 DES-CBC3-SHA
# DHE-DSS-AES128-SHA DHE-DSS-AES256-SHA DHE-DSS-SEED-SHA
# DHE-RSA-AES128-SHA DHE-RSA-AES256-SHA DHE-RSA-SEED-SHA
# EDH-DSS-DES-CBC-SHA EDH-DSS-DES-CBC3-SHA
# EDH-RSA-DES-CBC-SHA EDH-RSA-DES-CBC3-SHA
# EXP-DES-CBC-SHA EXP-EDH-DSS-DES-CBC-SHA
# EXP-EDH-RSA-DES-CBC-SHA EXP-RC2-CBC-MD5 EXP-RC2-CBC-MD5
# EXP-RC4-MD5 EXP-RC4-MD5 RC2-CBC-MD5 RC4-MD5 RC4-MD5
# RC4-SHA SEED-SHA
t/02_base.t ............
1..11
ok 1 - configuration
# Subtest: Basic functions
1..38
ok 1 - use Crypt::PKCS10;
ok 2 - Crypt::PKCS10->can(...)
ok 3 - Crypt::PKCS10->can(...)
ok 4 - getAPIversion unset
ok 5 - setAPIversion 1
ok 6 - getAPIversion 1
ok 7 - load PEM from variable
ok 8 - An object of class 'Crypt::PKCS10' isa 'Crypt::PKCS10'
ok 9 - CSR version
ok 10 - CSR commonName
ok 11 - emailAddress
ok 12 - hex subjectPublicKey
ok 13 - PEM subjectPublicKey
ok 14 - subjectPublicKeyParams(RSA)
ok 15 - signature
ok 16 - certificationRequest
ok 17 - subject()
ok 18 - userID accessor autoloaded
ok 19 - extracted PEM
ok 20 - extracted DER
ok 21 - load PEM from variable
ok 22 - encryption algorithm
ok 23 - signature algorithm
ok 24 - signature parameters
ok 25 - signature decoding
ok 26 - verify RSA CSR signature
ok 27 - load PEM from filename
ok 28 - load DER from file handle
ok 29 - DER from file matches DER from PEM
# Subtest: subject name component access
1..9
ok 1 - /C
ok 2 - /ST
ok 3 - /L
ok 4 - /O
ok 5 - /OU/OU
ok 6 - /CN
ok 7 - /emailAddress
ok 8 - /DC
ok 9 - subject name component list
ok 30 - subject name component access
ok 31 - bad signature rejected
ok 32 - bad signature loaded
ok 33 - checkSignature returns false
ok 34 - checkSignature sets error string
ok 35 - class and instance error strings match
ok 36 - reject invalid base64
ok 37 - accept invalid base64
ok 38 - correct invalid base64
ok 2 - Basic functions
# Subtest: attribute functions
1..7
ok 1 - attributes list is correct
ok 2 - missing attribute
ok 3 - challengePassword string by OID
ok 4 - challengePassword string
ok 5 - challengePassword array
ok 6 - unstructuredName string
ok 7 - unstructuredName array
ok 3 - attribute functions
# Subtest: basic extension functions
1..18
ok 1 - extensions list is correct
ok 2 - extensionPresent undef
ok 3 - extensionPresent by OID
ok 4 - extension present critical
ok 5 - basicConstraints string
ok 6 - basicConstraints string by OID
ok 7 - basicConstraints hash
ok 8 - keyUsage string
ok 9 - KeyUsage is an arrayref
ok 10 - keyUsage array
ok 11 - extKeyUsage string
ok 12 - extKeyUsage array
ok 13 - subjectKeyIdentifier string
ok 14 - certificatePolicies string
ok 15 - certificatePolicies array
ok 16 - certificateTemplate absent
ok 17 - extensionValue when extension absent
ok 18 - subjectAltName
ok 4 - basic extension functions
# Subtest: subjectAltname
1..5
ok 1 - structure returned as extension
ok 2 - subjectAltName returns string in scalar context
ok 3 - component list
ok 4 - IP address list selection
ok 5 - extraction of first IP address
ok 5 - subjectAltname
# Subtest: oid mapping
1..6
ok 1 - name2oid main table
ok 2 - name2oid extKeyUsages
ok 3 - name2oid returns undef if unknown
ok 4 - oid2name main table
ok 5 - oid2name extKeyUsages
ok 6 - oid2name returns oid if not registered
ok 6 - oid mapping
# Subtest: oid registration
1..14
ok 1 - OID is not registered
ok 2 - OID is registered
ok 3 - KeyUsage OID registered
ok 4 - Register longform OID
ok 5 - Find by name
ok 6 - Find by OID
ok 7 - Register /E for emailAddress
ok 8 - Short name for /emailAddress
ok 9 - Register duplicate shortname
ok 10 - Register invalid OID
ok 11 - Register duplicate oid
ok 12 - Register duplicate longname
ok 13 - Register shortname to unassigned OID
ok 14 - Minimum arguments
ok 7 - oid registration
# Subtest: Microsoft extensions
1..10
ok 1 - load PEM from file handle
ok 2 - subject
ok 3 - attributes list
ok 4 - ENROLLMENT_CSP_PROVIDER string
ok 5 - ENROLLMENT_CSP_PROVIDER hash
ok 6 - ENROLLMENT_NAME_VALUE_PAIR string
ok 7 - ENROLLMENT_NAME_VALUE_PAIR hash
ok 8 - ClientInformation string
ok 9 - ClientInformation hash
ok 10 - OS_Version
ok 8 - Microsoft extensions
# Subtest: stringify object
1..9
ok 1 - no exception
ok 2 - returns something
ok 3 - approximate result length
ok 4 - string includes subject
ok 5 - string includes RSA public key
ok 6 - string includes public key PEM
ok 7 - string closes public key PEM
ok 8 - string includes CSR PEM
ok 9 - string closes CSR PEM
ok 9 - stringify object
# Subtest: DSA requests
1..5
ok 1 - load PEM from filename
ok 2 - DSA signature
ok 3 - subjectPublicKeyParams(DSA)
ok 4 - signature decoding
ok 5 - verify DSA signature
ok 10 - DSA requests
# Subtest: API v0
1..7
ok 1 - new is undef
ok 2 - failure throws exception
ok 3 - failure returns error string
ok 4 - doesn't verify signature
ok 5 - csr has bad signature
ok 6 - subjectPublicKeyParams throws exception
ok 7 - KeyUsage is a scalar
ok 11 - API v0
ok
# Perl /Users/fly2400/ap2400-300558/bin/perl-dynamic version 5.24.0
t/03_ecc.t .............
1..24
ok 1 - configuration
ok 2 - setAPIversion 1
ok 3 - load PEM from file
ok 4 - subject
ok 5 - CSR commonName
ok 6 - hex subjectPublicKey
ok 7 - PEM subjectPublicKey
ok 8 - signature
ok 9 - subject()
ok 10 - encryption algorithm
ok 11 - subjectPublicKeyParams(EC brainpool)
ok 12 - signature algorithm
ok 13 - ECDSA signature components
ok 14 - parse EC key
ok 15 - extract EC parameters
ok 16 - detailed EC parameters
ok 17 - load PEM from file
ok 18 - encryption algorithm
ok 19 - subjectPublicKeyParams(EC secp)
ok 20 - signature algorithm
ok 21 - bad signature rejected
ok 22 - bad signature loaded
ok 23 - checkSignature returns false
ok 24 - checkSignature sets error string
ok
t/author-critic.t ...... skipped: these tests are for testing by the author
t/author-pod-syntax.t .. skipped: these tests are for testing by the author
All tests successful.
Files=6, Tests=36, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.93 cusr 0.15 csys = 1.14 CPU)
Result: PASS
TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz
make test TEST_VERBOSE=1 -- OK
Timothe Litt <tlhackque@cpan.org>
parse PKCS #10 certificate requests
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-PKCS10-1.8002-6oOrbI && tar cvf - Crypt-PKCS10-1.8002.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/T/TL/TLHACKQUE/Crypt-PKCS10-1.8002.tar.gz
Crypt-PKCS10-1.8002.ppd
blib/
blib/lib/
blib/lib/Crypt/
blib/lib/Crypt/PKCS10.pm
blib/man3/
blib/man3/Crypt::PKCS10.3
LEADER/Crypt-LE-0.19.tar.gz
Has already been unwrapped into directory /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-LE-0.19-CAjBph
LEADER/Crypt-LE-0.19.tar.gz
Has already been prepared
Running make for L/LE/LEADER/Crypt-LE-0.19.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-PKCS10-1.8002-6oOrbI/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-PKCS10-1.8002-6oOrbI/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Crypt/LE.pm blib/lib/Crypt/LE.pm
cp lib/Crypt/LE/Challenge/Simple.pm blib/lib/Crypt/LE/Challenge/Simple.pm
cp lib/Crypt/LE/Complete/Simple.pm blib/lib/Crypt/LE/Complete/Simple.pm
cp script/le.pl blib/script/le.pl
"/Users/fly2400/ap2400-300558/bin/perl-dynamic" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/le.pl
Manifying 3 pod documents
LEADER/Crypt-LE-0.19.tar.gz
make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-PKCS10-1.8002-6oOrbI/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-PKCS10-1.8002-6oOrbI/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Crypt::LE 0.19, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t ......
ok 1 - use Crypt::LE;
1..1
ok
# Testing Crypt::LE 0.19, Setup methods, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/01-setup.t .....
1..47
ok 1 - Crypt::LE->can('load_account_key')
ok 2 - Crypt::LE->can('generate_account_key')
ok 3 - Crypt::LE->can('account_key')
ok 4 - Crypt::LE->can('load_csr')
ok 5 - Crypt::LE->can('generate_csr')
ok 6 - Crypt::LE->can('csr')
ok 7 - Crypt::LE->can('csr_key')
ok 8 - Crypt::LE->can('set_account_email')
ok 9 - Crypt::LE->can('set_domains')
ok 10 - Setting domain names with no value
ok 11 - Setting domain names with unsupported entity type (URI)
ok 12 - Setting domain names with unsupported entity type (IP)
ok 13 - Setting domain names with unsupported entity type (email)
ok 14 - Setting domain names with unsupported entity type (dotless name)
ok 15 - Setting domain names with unsupported entity type (wildcard)
ok 16 - Setting domain names with a string
ok 17 - Setting domain names with an array ref
ok 18 - Checking the domain names set
ok 19 - Loading non-existent key
ok 20 - Generating account key
ok 21 - Getting account key
ok 22 - Reloading account key
ok 23 - Setting a valid key from scalar
ok 24 - Setting an invalid key from scalar
ok 25 - Loading non-existent CSR
ok 26 - Setting a valid CSR from scalar
ok 27 - Setting an invalid CSR from scalar
ok 28 - Setting a broken CSR from scalar
ok 29 - Setting a valid CSR key from scalar
ok 30 - Setting an invalid CSR key from scalar
ok 31 - Generating CSR without providing domain names
ok 32 - Generating CSR for one domain
ok 33 - Generating CSR for multiple domains
ok 34 - Retrieving generated CSR
ok 35 - Retrieving the key used for CSR
ok 36 - Reloading CSR
ok 37 - Generating CSR for unsupported entity type (URI)
ok 38 - Generating CSR for unsupported entity type (IP)
ok 39 - Generating CSR for unsupported entity type (email)
ok 40 - Generating CSR for unsupported entity type (dotless name)
ok 41 - Generating CSR for unsupported entity type (wildcard)
ok 42 - Generating RSA-based CSR (default)
ok 43 - Generating RSA-based CSR (short key)
ok 44 - Generating RSA-based CSR (regular key)
ok 45 - Generating RSA-based CSR (odd key)
ok 46 - Generating ECC-based CSR (default)
ok 47 - Generating ECC-based CSR (odd curve)
ok
# Testing Crypt::LE 0.19, Workflow methods, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/02-workflow.t ..
1..14
ok 1 - Crypt::LE->can('directory')
ok 2 - Crypt::LE->can('register')
ok 3 - Crypt::LE->can('accept_tos')
ok 4 - Crypt::LE->can('request_challenge')
ok 5 - Crypt::LE->can('accept_challenge')
ok 6 - Crypt::LE->can('verify_challenge')
ok 7 - Crypt::LE->can('request_certificate')
ok 8 - Crypt::LE->can('request_issuer_certificate')
ok 9 - Crypt::LE->can('revoke_certificate')
ok 10 - Loading resources directory
ok 11 - Checking the domains list
ok 12 - Checking failed domains on the last verification call
ok 13 - Checking failed domains on any verification call
ok 14 - Checking verified domains
ok
All tests successful.
Files=3, Tests=62, 4 wallclock secs ( 0.03 usr 0.01 sys + 3.77 cusr 0.12 csys = 3.93 CPU)
Result: PASS
LEADER/Crypt-LE-0.19.tar.gz
make test TEST_VERBOSE=1 -- OK
Alexander Yezhov <leader@cpan.org>
Let's Encrypt API interfacing module.
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Crypt-LE-0.19-CAjBph && tar cvf - Crypt-LE-0.19.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/L/LE/LEADER/Crypt-LE-0.19.tar.gz
Crypt-LE-0.19.ppd
blib/
blib/lib/
blib/lib/Crypt/
blib/lib/Crypt/LE/
blib/lib/Crypt/LE/Challenge/
blib/lib/Crypt/LE/Challenge/Simple.pm
blib/lib/Crypt/LE/Complete/
blib/lib/Crypt/LE/Complete/Simple.pm
blib/lib/Crypt/LE.pm
blib/man3/
blib/man3/Crypt::LE.3
blib/man3/Crypt::LE::Challenge::Simple.3
blib/man3/Crypt::LE::Complete::Simple.3
blib/script/
blib/script/le.pl
Finished 2016-10-21T12:37:30