PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin Start 2017-01-26T04:04:41 ActivePerl-2400 CPAN-2.10 Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata' Database was generated on Wed, 25 Jan 2017 06:41:02 GMT Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/P/PE/PERLANCAR/Bencher-Scenario-SetOperationModules-0.10.tar.gz Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Bencher-Scenario-SetOperationModules-0.10.tar.gz ok Bencher-Scenario-SetOperationModules-0.10/ Bencher-Scenario-SetOperationModules-0.10/README Bencher-Scenario-SetOperationModules-0.10/dist.ini Bencher-Scenario-SetOperationModules-0.10/Makefile.PL Bencher-Scenario-SetOperationModules-0.10/META.yml Bencher-Scenario-SetOperationModules-0.10/t/ Bencher-Scenario-SetOperationModules-0.10/t/author-pod-syntax.t Bencher-Scenario-SetOperationModules-0.10/t/00-compile.t Bencher-Scenario-SetOperationModules-0.10/t/author-pod-coverage.t Bencher-Scenario-SetOperationModules-0.10/weaver.ini Bencher-Scenario-SetOperationModules-0.10/META.json Bencher-Scenario-SetOperationModules-0.10/MANIFEST Bencher-Scenario-SetOperationModules-0.10/lib/ Bencher-Scenario-SetOperationModules-0.10/lib/Bencher/ Bencher-Scenario-SetOperationModules-0.10/lib/Bencher/Scenario/ Bencher-Scenario-SetOperationModules-0.10/lib/Bencher/Scenario/SetOperationModules.pm Bencher-Scenario-SetOperationModules-0.10/lib/Bencher/ScenarioR/ Bencher-Scenario-SetOperationModules-0.10/lib/Bencher/ScenarioR/SetOperationModules.pm Bencher-Scenario-SetOperationModules-0.10/LICENSE Bencher-Scenario-SetOperationModules-0.10/Changes Configuring P/PE/PERLANCAR/Bencher-Scenario-SetOperationModules-0.10.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Bencher::Backend 1.034 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Bencher::Scenario::SetOperationModules Writing MYMETA.yml and MYMETA.json PERLANCAR/Bencher-Scenario-SetOperationModules-0.10.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Bencher-Scenario-SetOperationModules-0.10.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Bencher-Scenario-SetOperationModules-0.10.tar.gz ---- Bencher::Backend [build_requires] Running test for module 'Bencher::Backend' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Bencher-Backend-1.034.tar.gz ok Bencher-Backend-1.034/ Bencher-Backend-1.034/README Bencher-Backend-1.034/dist.ini Bencher-Backend-1.034/Changes.new Bencher-Backend-1.034/Makefile.PL Bencher-Backend-1.034/META.yml Bencher-Backend-1.034/t/ Bencher-Backend-1.034/t/author-pod-syntax.t Bencher-Backend-1.034/t/release-rinci.t Bencher-Backend-1.034/t/00-compile.t Bencher-Backend-1.034/t/author-pod-coverage.t Bencher-Backend-1.034/weaver.ini Bencher-Backend-1.034/META.json Bencher-Backend-1.034/MANIFEST Bencher-Backend-1.034/lib/ Bencher-Backend-1.034/lib/Benchmark/ Bencher-Backend-1.034/lib/Benchmark/Dumb/ Bencher-Backend-1.034/lib/Benchmark/Dumb/SimpleTime.pm Bencher-Backend-1.034/lib/Bencher/ Bencher-Backend-1.034/lib/Bencher/Formatter.pm Bencher-Backend-1.034/lib/Bencher/Formatter/ Bencher-Backend-1.034/lib/Bencher/Formatter/ScaleTime.pm Bencher-Backend-1.034/lib/Bencher/Formatter/ScaleRate.pm Bencher-Backend-1.034/lib/Bencher/Formatter/ScaleSize.pm Bencher-Backend-1.034/lib/Bencher/Formatter/RoundNumbers.pm Bencher-Backend-1.034/lib/Bencher/Formatter/ShowEnv.pm Bencher-Backend-1.034/lib/Bencher/Formatter/DeleteNotesFieldIfEmpty.pm Bencher-Backend-1.034/lib/Bencher/Formatter/DeleteSeqField.pm Bencher-Backend-1.034/lib/Bencher/Formatter/DeleteConstantFields.pm Bencher-Backend-1.034/lib/Bencher/Formatter/RenderAsTextTable.pm Bencher-Backend-1.034/lib/Bencher/Formatter/AddVsSlowestField.pm Bencher-Backend-1.034/lib/Bencher/Formatter/ModuleStartup.pm Bencher-Backend-1.034/lib/Bencher/Formatter/Sort.pm Bencher-Backend-1.034/lib/Bencher/Scenario/ Bencher-Backend-1.034/lib/Bencher/Scenario/Example/ Bencher-Backend-1.034/lib/Bencher/Scenario/Example/CmdLineTemplate.pm Bencher-Backend-1.034/lib/Bencher/Scenario/Example/CommandNotFound.pm Bencher-Backend-1.034/lib/Bencher/Scenario/Example/MultipleArgValues/ Bencher-Backend-1.034/lib/Bencher/Scenario/Example/MultipleArgValues/Array.pm Bencher-Backend-1.034/lib/Bencher/Scenario/Example/MultipleArgValues/Hash.pm Bencher-Backend-1.034/lib/Bencher/Scenario/Example.pm Bencher-Backend-1.034/lib/Bencher/Backend.pm Bencher-Backend-1.034/lib/Bencher/Role/ Bencher-Backend-1.034/lib/Bencher/Role/FieldMunger.pm Bencher-Backend-1.034/lib/Bencher/Role/ResultMunger.pm Bencher-Backend-1.034/lib/Bencher/Role/ResultRenderer.pm Bencher-Backend-1.034/lib/Sah/ Bencher-Backend-1.034/lib/Sah/Schema/ Bencher-Backend-1.034/lib/Sah/Schema/bencher/ Bencher-Backend-1.034/lib/Sah/Schema/bencher/scenario.pm Bencher-Backend-1.034/LICENSE Bencher-Backend-1.034/Changes Configuring P/PE/PERLANCAR/Bencher-Backend-1.034.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Benchmark::Dumb 0 not found. Warning: prerequisite Data::Clean::JSON 0.38 not found. Warning: prerequisite Data::Clone 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Bencher::Backend Writing MYMETA.yml and MYMETA.json PERLANCAR/Bencher-Backend-1.034.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Bencher-Backend-1.034.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Bencher-Backend-1.034.tar.gz ---- Benchmark::Dumb [requires] Data::Clone [requires] Data::Clean::JSON [requires] Running test for module 'Benchmark::Dumb' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/S/SM/SMUELLER/Dumbbench-0.10.tar.gz ok Dumbbench-0.10/ Dumbbench-0.10/META.yml Dumbbench-0.10/lib/ Dumbbench-0.10/lib/Benchmark/ Dumbbench-0.10/lib/Benchmark/Dumb.pm Dumbbench-0.10/lib/Dumbbench/ Dumbbench-0.10/lib/Dumbbench/Stats.pm Dumbbench-0.10/lib/Dumbbench/BoxPlot.pm Dumbbench-0.10/lib/Dumbbench/Instance.pm Dumbbench-0.10/lib/Dumbbench/Instance/ Dumbbench-0.10/lib/Dumbbench/Instance/PerlSub.pm Dumbbench-0.10/lib/Dumbbench/Instance/Cmd.pm Dumbbench-0.10/lib/Dumbbench/Instance/PerlEval.pm Dumbbench-0.10/lib/Dumbbench/Result.pm Dumbbench-0.10/lib/Dumbbench/CPUFrequencyPinner.pm Dumbbench-0.10/lib/Dumbbench.pm Dumbbench-0.10/xt/ Dumbbench-0.10/xt/at_000_eval_vs_sub.t Dumbbench-0.10/xt/at_000_external_vs_eval.t Dumbbench-0.10/xt/changes.t Dumbbench-0.10/MANIFEST Dumbbench-0.10/t/ Dumbbench-0.10/t/000_load.t Dumbbench-0.10/t/010_stats.t Dumbbench-0.10/t/100_bdumb.t Dumbbench-0.10/r/ Dumbbench-0.10/r/boxplot.r Dumbbench-0.10/bin/ Dumbbench-0.10/bin/dumbbench Dumbbench-0.10/README.pod Dumbbench-0.10/META.json Dumbbench-0.10/MANIFEST.SKIP Dumbbench-0.10/LICENSE Dumbbench-0.10/Makefile.PL Dumbbench-0.10/Changes Dumbbench-0.10/INSTALL.SKIP Dumbbench-0.10/examples/ Dumbbench-0.10/examples/TryPackage.pm Configuring S/SM/SMUELLER/Dumbbench-0.10.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Dumbbench Writing MYMETA.yml and MYMETA.json SMUELLER/Dumbbench-0.10.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for S/SM/SMUELLER/Dumbbench-0.10.tar.gz >>> make cp lib/Dumbbench.pm blib/lib/Dumbbench.pm cp lib/Dumbbench/Instance/PerlEval.pm blib/lib/Dumbbench/Instance/PerlEval.pm cp lib/Dumbbench/Result.pm blib/lib/Dumbbench/Result.pm cp lib/Dumbbench/Instance/PerlSub.pm blib/lib/Dumbbench/Instance/PerlSub.pm cp lib/Dumbbench/CPUFrequencyPinner.pm blib/lib/Dumbbench/CPUFrequencyPinner.pm cp lib/Dumbbench/BoxPlot.pm blib/lib/Dumbbench/BoxPlot.pm cp lib/Benchmark/Dumb.pm blib/lib/Benchmark/Dumb.pm cp README.pod blib/lib/README.pod cp lib/Dumbbench/Stats.pm blib/lib/Dumbbench/Stats.pm cp lib/Dumbbench/Instance.pm blib/lib/Dumbbench/Instance.pm cp lib/Dumbbench/Instance/Cmd.pm blib/lib/Dumbbench/Instance/Cmd.pm cp bin/dumbbench blib/script/dumbbench "/Users/fly2400/ap2400-300558/bin/perl-dynamic" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/dumbbench Manifying 6 pod documents SMUELLER/Dumbbench-0.10.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/000_load.t ... 1..2 ok 1 - use Dumbbench; ok 2 - use Benchmark::Dumb; ok t/010_stats.t .. 1..26 ok 1 - An object of class 'Dumbbench::Stats' isa 'Dumbbench::Stats' ok 2 ok 3 - Test from main:t/010_stats.t:13 ok 4 - Test from main:t/010_stats.t:14 ok 5 - Test from main:t/010_stats.t:17 ok 6 - Test from main:t/010_stats.t:18 ok 7 - Test from main:t/010_stats.t:22 not ok 8 - Test from main:t/010_stats.t:25 # TODO OBIWAN: likely just a matter of choosing rounding up or down? # Failed (TODO) test 'Test from main:t/010_stats.t:25' # at t/010_stats.t line 100. not ok 9 - Test from main:t/010_stats.t:26 # TODO OBIWAN: likely just a matter of choosing rounding up or down? # Failed (TODO) test 'Test from main:t/010_stats.t:26' # at t/010_stats.t line 100. ok 10 - Test from main:t/010_stats.t:31 not ok 11 - Test from main:t/010_stats.t:34 # TODO OBIWAN: likely just a matter of choosing rounding up or down? # Failed (TODO) test 'Test from main:t/010_stats.t:34' # at t/010_stats.t line 100. not ok 12 - Test from main:t/010_stats.t:35 # TODO OBIWAN: likely just a matter of choosing rounding up or down? # Failed (TODO) test 'Test from main:t/010_stats.t:35' # at t/010_stats.t line 100. ok 13 - Test from main:t/010_stats.t:43 ok 14 - Test from main:t/010_stats.t:48 ok 15 - Test from main:t/010_stats.t:49 ok 16 - nsigma_outliers==0 => no rejection I ok 17 - nsigma_outliers==0 => no rejection II ok 18 - nsigma_outliers=1 I ok 19 - nsigma_outliers=1 II ok 20 - nsigma_outliers=1 III ok 21 # skip Skipping extra tests since SOOT is not available ok 22 # skip Skipping extra tests since SOOT is not available ok 23 # skip Skipping extra tests since SOOT is not available ok 24 # skip Skipping extra tests since SOOT is not available ok 25 # skip Skipping extra tests since SOOT is not available ok 26 # skip Skipping extra tests since SOOT is not available ok t/100_bdumb.t .. 1..27 ok 1 - timeit has no output ok 2 - low count warns about precision ok 3 - An object of class 'Benchmark::Dumb' isa 'Benchmark::Dumb' ok 4 - Benchmark::Dumb->can('timesum') ok 5 - Benchmark::Dumb->can('timediff') ok 6 - Benchmark::Dumb->can('timestr') ok 7 - Benchmark::Dumb->can('name') ok 8 ok 9 - An object of class 'Benchmark::Dumb' isa 'Benchmark::Dumb' ok 10 ok 11 ok 12 ok 13 ok 14 - An object of class 'Benchmark::Dumb' isa 'Benchmark::Dumb' ok 15 ok 16 ok 17 ok 18 ok 19 - timethis prints a timestr ok 20 - low count warns about precision ok 21 - two benchmarks run ok 22 ok 23 ok 24 - returns hashref ok 25 - two results ok 26 - An object of class 'Benchmark::Dumb' isa 'Benchmark::Dumb' ok 27 - An object of class 'Benchmark::Dumb' isa 'Benchmark::Dumb' ok All tests successful. Files=3, Tests=55, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.18 cusr 0.03 csys = 0.24 CPU) Result: PASS SMUELLER/Dumbbench-0.10.tar.gz make test TEST_VERBOSE=1 -- OK PPD for Dumbbench-0.10 already made Running test for module 'Data::Clone' Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'get' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/G/GF/GFUJI/Data-Clone-0.004.tar.gz ok Data-Clone-0.004/ Data-Clone-0.004/benchmark/ Data-Clone-0.004/Changes Data-Clone-0.004/Data-Clone.xs Data-Clone-0.004/data_clone.h Data-Clone-0.004/example/ Data-Clone-0.004/inc/ Data-Clone-0.004/lib/ Data-Clone-0.004/Makefile.PL Data-Clone-0.004/MANIFEST Data-Clone-0.004/MANIFEST.SKIP Data-Clone-0.004/META.yml Data-Clone-0.004/README Data-Clone-0.004/t/ Data-Clone-0.004/xshelper.h Data-Clone-0.004/xt/ Data-Clone-0.004/xt/01_podspell.t Data-Clone-0.004/xt/02_pod.t Data-Clone-0.004/xt/03_pod-coverage.t Data-Clone-0.004/xt/04_synopsis.t Data-Clone-0.004/t/00_load.t Data-Clone-0.004/t/01_basic.t Data-Clone-0.004/t/02_object.t Data-Clone-0.004/t/03_scalar_ref.t Data-Clone-0.004/t/04_tree.t Data-Clone-0.004/t/05_super.t Data-Clone-0.004/t/06_tie.t Data-Clone-0.004/t/07_stack.t Data-Clone-0.004/t/10_threads.t Data-Clone-0.004/t/11_leaktrace.t Data-Clone-0.004/lib/Data/ Data-Clone-0.004/lib/Data/Clone.pm Data-Clone-0.004/inc/Module/ Data-Clone-0.004/inc/Module/Install/ Data-Clone-0.004/inc/Module/Install.pm Data-Clone-0.004/inc/Module/Install/AuthorTests.pm Data-Clone-0.004/inc/Module/Install/Base.pm Data-Clone-0.004/inc/Module/Install/Can.pm Data-Clone-0.004/inc/Module/Install/Makefile.pm Data-Clone-0.004/inc/Module/Install/Metadata.pm Data-Clone-0.004/inc/Module/Install/Repository.pm Data-Clone-0.004/inc/Module/Install/WriteAll.pm Data-Clone-0.004/inc/Module/Install/XSUtil.pm Data-Clone-0.004/example/scalar_refs.pl Data-Clone-0.004/benchmark/method.pl Data-Clone-0.004/benchmark/object.pl Data-Clone-0.004/benchmark/vs_clone.pl Data-Clone-0.004/benchmark/vs_fast.pl Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'prepare' Configuring G/GF/GFUJI/Data-Clone-0.004.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Writing ppport.h Configured with: --prefix=/Applications/Xcode.app/Contents/Developer/usr --with-gxx-include-dir=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk/usr/include/c++/4.2.1 Warning: prerequisite Test::Requires 0.03 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Data::Clone Writing MYMETA.yml and MYMETA.json GFUJI/Data-Clone-0.004.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for G/GF/GFUJI/Data-Clone-0.004.tar.gz Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'make' ---- Unsatisfied dependencies detected during ---- ---- GFUJI/Data-Clone-0.004.tar.gz ---- Test::Requires [build_requires] Running test for module 'Test::Requires' Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'get' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/T/TO/TOKUHIROM/Test-Requires-0.10.tar.gz ok Test-Requires-0.10/Changes Test-Requires-0.10/LICENSE Test-Requires-0.10/META.json Test-Requires-0.10/Makefile.PL Test-Requires-0.10/README.md Test-Requires-0.10/cpanfile Test-Requires-0.10/lib/Test/Requires.pm Test-Requires-0.10/minil.toml Test-Requires-0.10/t/00_compile.t Test-Requires-0.10/t/01_simple.t Test-Requires-0.10/t/02_no_plan.t Test-Requires-0.10/t/03_import_hashref.t Test-Requires-0.10/t/04_import_array.t Test-Requires-0.10/t/05_success.t Test-Requires-0.10/t/06_perlver.t Test-Requires-0.10/xt/02_perlcritic.t Test-Requires-0.10/xt/perlcriticrc Test-Requires-0.10/META.yml Test-Requires-0.10/MANIFEST Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'prepare' Configuring T/TO/TOKUHIROM/Test-Requires-0.10.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Test::Requires Writing MYMETA.yml and MYMETA.json TOKUHIROM/Test-Requires-0.10.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for T/TO/TOKUHIROM/Test-Requires-0.10.tar.gz Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'make' >>> make cp lib/Test/Requires.pm blib/lib/Test/Requires.pm Manifying 1 pod document TOKUHIROM/Test-Requires-0.10.tar.gz make -- OK Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Dumbbench-0.10-gi8wd1/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Test::More: 1.302067 t/00_compile.t ......... 1..1 ok 1 - use Test::Requires; ok t/01_simple.t .......... 1..10 ok 1 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 2 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 3 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 4 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 5 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 6 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 7 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 8 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 9 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 10 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok t/02_no_plan.t ......... ok 1 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found 1..1 ok t/03_import_hashref.t .. skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found t/04_import_array.t .... skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found t/05_success.t ......... 1..1 ok 1 ok t/06_perlver.t ......... ok 1 - should reach here ok 2 # skip Perl v5.999.0 required (did you mean v5.9.0?)--this is only v5.24.0, stopped at (eval 8) line 2. # BEGIN failed--compilation aborted at (eval 8) line 2. # 1..2 ok All tests successful. Files=7, Tests=15, 1 wallclock secs ( 0.03 usr 0.02 sys + 0.29 cusr 0.05 csys = 0.39 CPU) Result: PASS TOKUHIROM/Test-Requires-0.10.tar.gz make test TEST_VERBOSE=1 -- OK Can't call method "fullname" on an undefined value at /Users/fly2400/cpanfly-5.24/lib/Fly/MakePPD.pm line 168. /Users/fly2400/ap2400-300558/bin/perl-dynamic exits with 255.