PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin
Start 2019-06-27T02:09:41
ActivePerl-2400 CPAN-2.10
Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata'
  Database was generated on Wed, 26 Jun 2019 03:41:03 GMT
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Complete-Getopt-Long-0.470.tar.gz ok
Complete-Getopt-Long-0.470/
Complete-Getopt-Long-0.470/MANIFEST
Complete-Getopt-Long-0.470/weaver.ini
Complete-Getopt-Long-0.470/README
Complete-Getopt-Long-0.470/META.json
Complete-Getopt-Long-0.470/Makefile.PL
Complete-Getopt-Long-0.470/META.yml
Complete-Getopt-Long-0.470/lib/
Complete-Getopt-Long-0.470/lib/Complete/
Complete-Getopt-Long-0.470/lib/Complete/Getopt/
Complete-Getopt-Long-0.470/lib/Complete/Getopt/Long.pm
Complete-Getopt-Long-0.470/Changes
Complete-Getopt-Long-0.470/t/
Complete-Getopt-Long-0.470/t/release-rinci.t
Complete-Getopt-Long-0.470/t/00-compile.t
Complete-Getopt-Long-0.470/t/complete_cli_arg.t
Complete-Getopt-Long-0.470/t/author-pod-syntax.t
Complete-Getopt-Long-0.470/t/author-pod-coverage.t
Complete-Getopt-Long-0.470/t/author-critic.t
Complete-Getopt-Long-0.470/LICENSE
Complete-Getopt-Long-0.470/dist.ini
Configuring P/PE/PERLANCAR/Complete-Getopt-Long-0.470.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Warning: prerequisite Complete::Bash 0.321 not found. We have 0.320.
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Complete::Getopt::Long
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
----   Unsatisfied dependencies detected during  ----
---- PERLANCAR/Complete-Getopt-Long-0.470.tar.gz ----
    Complete::Bash [build_requires]
Running test for module 'Complete::Bash'
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Complete-Bash-0.321.tar.gz ok
Complete-Bash-0.321/
Complete-Bash-0.321/MANIFEST
Complete-Bash-0.321/weaver.ini
Complete-Bash-0.321/README
Complete-Bash-0.321/META.json
Complete-Bash-0.321/Makefile.PL
Complete-Bash-0.321/META.yml
Complete-Bash-0.321/lib/
Complete-Bash-0.321/lib/Complete/
Complete-Bash-0.321/lib/Complete/Bash.pm
Complete-Bash-0.321/Changes
Complete-Bash-0.321/t/
Complete-Bash-0.321/t/parse_cmdline.t
Complete-Bash-0.321/t/release-rinci.t
Complete-Bash-0.321/t/00-compile.t
Complete-Bash-0.321/t/point.t
Complete-Bash-0.321/t/join_wordbreak_words.t
Complete-Bash-0.321/t/author-pod-syntax.t
Complete-Bash-0.321/t/author-pod-coverage.t
Complete-Bash-0.321/t/author-critic.t
Complete-Bash-0.321/t/format_completion.t
Complete-Bash-0.321/LICENSE
Complete-Bash-0.321/dist.ini
Configuring P/PE/PERLANCAR/Complete-Bash-0.321.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Complete::Bash
Writing MYMETA.yml and MYMETA.json
  PERLANCAR/Complete-Bash-0.321.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for P/PE/PERLANCAR/Complete-Bash-0.321.tar.gz
>>> make
cp lib/Complete/Bash.pm blib/lib/Complete/Bash.pm
Manifying 1 pod document
  PERLANCAR/Complete-Bash-0.321.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............ 
1..1
ok 1 - Complete/Bash.pm loaded ok
ok
t/author-critic.t ......... skipped: these tests are for testing by the author
t/author-pod-coverage.t ... skipped: these tests are for testing by the author
t/author-pod-syntax.t ..... skipped: these tests are for testing by the author
t/format_completion.t ..... 
# Subtest: accepts array of str
    ok 1
    1..1
ok 1 - accepts array of str
# Subtest: accepts array of hashref
    ok 1
    1..1
ok 2 - accepts array of hashref
# Subtest: esc_mode default
    ok 1
    1..1
ok 3 - esc_mode default
# Subtest: esc_mode none
    ok 1
    1..1
ok 4 - esc_mode none
# Subtest: esc_mode shellvar
    ok 1
    1..1
ok 5 - esc_mode shellvar
# Subtest: as array
    ok 1
    1..1
ok 6 - as array
# Subtest: path_sep /
    ok 1
    ok 2
    1..2
ok 7 - path_sep /
# Subtest: path_sep ::
    ok 1
    ok 2
    ok 3
    1..3
ok 8 - path_sep ::
1..8
ok
t/join_wordbreak_words.t .. 
# Subtest: basic
    ok 1
    1..1
ok 1 - basic
# Subtest: no join at CWORD
    ok 1 - after truncate_current_word = 0
    ok 2 - after truncate_current_word = 1
    1..2
ok 2 - no join at CWORD
1..2
ok
t/parse_cmdline.t ......... 
# Subtest: basic
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    1..7
ok 1 - basic
# Subtest: whitespace before command
    ok 1
    1..1
ok 2 - whitespace before command
# Subtest: middle
    ok 1
    ok 2
    ok 3
    1..3
ok 3 - middle
# Subtest: escaped space
    ok 1
    ok 2
    ok 3
    ok 4
    1..4
ok 4 - escaped space
# Subtest: double quotes
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    ok 8
    ok 9
    ok 10
    ok 11
    ok 12
    ok 13
    ok 14
    ok 15
    ok 16
    ok 17
    1..17
ok 5 - double quotes
# Subtest: single quotes
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    ok 8
    ok 9
    ok 10
    ok 11
    ok 12
    ok 13
    ok 14
    ok 15
    ok 16
    1..16
ok 6 - single quotes
# Subtest: word-breaking characters
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    ok 8
    ok 9
    ok 10
    ok 11
    ok 12
    1..12
ok 7 - word-breaking characters
# Subtest: variable substitution
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    1..7
ok 8 - variable substitution
# Subtest: tilde expansion
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    ok 8
    ok 9
    ok 10
    1..10
ok 9 - tilde expansion
# Subtest: opt:truncate_current_word
    ok 1
    ok 2
    ok 3
    ok 4
    ok 5
    ok 6
    ok 7
    ok 8
    ok 9
    ok 10
    1..10
ok 10 - opt:truncate_current_word
1..10
ok
t/point.t ................. 
ok 1 - no marker -> dies
ok 2
ok 3
ok 4
1..4
ok
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=9, Tests=25,  1 wallclock secs ( 0.03 usr  0.02 sys +  0.47 cusr  0.07 csys =  0.59 CPU)
Result: PASS
  PERLANCAR/Complete-Bash-0.321.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Complete-Bash" VERSION="0.321" DATE="2019-06-25">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Completion routines for bash shell</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.24"/>
  <CODEBASE HREF="Complete-Bash-0.321.tar.gz"/>
  <PROVIDE NAME="Complete::Bash" VERSION="0.321"/>
  <REQUIRE NAME="Exporter::" VERSION="5.57"/>
  <REQUIRE NAME="Log::ger" VERSION="0.027"/>
  <REQUIRE NAME="strict::"/>
  <REQUIRE NAME="warnings::"/>
  <!-- Built 2019-06-27 with ActivePerl-2400 on perl-osx (Mac OS X 10.9.5) log Complete-Getopt-Long-0.470.d/log-20190627T020941.txt -->
</SOFTPKG>
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Bash-0.321-cOtlYv && tar cvf - Complete-Bash-0.321.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/P/PE/PERLANCAR/Complete-Bash-0.321.tar.gz
Complete-Bash-0.321.ppd
blib/
blib/lib/
blib/lib/Complete/
blib/lib/Complete/Bash.pm
blib/man3/
blib/man3/Complete::Bash.3
  PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
  Has already been unwrapped into directory /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.470-M8ipQq
  PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
  Has already been prepared
Running make for P/PE/PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Bash-0.321-cOtlYv/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Bash-0.321-cOtlYv/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Complete/Getopt/Long.pm blib/lib/Complete/Getopt/Long.pm
Manifying 1 pod document
  PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
  make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Bash-0.321-cOtlYv/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Bash-0.321-cOtlYv/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ........... 
1..1
ok 1 - Complete/Getopt/Long.pm loaded ok
ok
t/author-critic.t ........ skipped: these tests are for testing by the author
t/author-pod-coverage.t .. skipped: these tests are for testing by the author
t/author-pod-syntax.t .... skipped: these tests are for testing by the author
t/complete_cli_arg.t ..... 
# Subtest: basics
    # Subtest: option name
        ok 1 - result
        1..1
    ok 1 - option name
    # Subtest: option name (2)
        ok 1 - result
        1..1
    ok 2 - option name (2)
    # Subtest: option name (3)
        ok 1 - result
        1..1
    ok 3 - option name (3)
    # Subtest: option name (single letter n! does not get --nox and --no-x)
        ok 1 - result
        1..1
    ok 4 - option name (single letter n! does not get --nox and --no-x)
    # Subtest: option name (bundling)
        ok 1 - result
        1..1
    ok 5 - option name (bundling)
    # Subtest: option name (bundling 2)
        ok 1 - result
        1..1
    ok 6 - option name (bundling 2)
    # Subtest: option name (bundling 3)
        ok 1 - result
        1..1
    ok 7 - option name (bundling 3)
    # Subtest: option name (bundling 4)
        ok 1 - result
        1..1
    ok 8 - option name (bundling 4)
    # Subtest: option name (bundling), bundling=0
        ok 1 - result
        1..1
    ok 9 - option name (bundling), bundling=0
    # Subtest: option name (bundling, stops after value expected)
        ok 1 - result
        1..1
    ok 10 - option name (bundling, stops after value expected)
    # Subtest: option value (bundling)
        ok 1 - result
        1..1
    ok 11 - option value (bundling)
    # Subtest: option name (bundling 1)
        ok 1 - result
        1..1
    ok 12 - option name (bundling 1)
    # Subtest: option name (bundling 1b)
        ok 1 - result
        1..1
    ok 13 - option name (bundling 1b)
    # Subtest: option name (bundling 5)
        ok 1 - result
        1..1
    ok 14 - option name (bundling 5)
    # Subtest: option name with mentioned non-repeatable option (alias)
        ok 1 - result
        1..1
    ok 15 - option name with mentioned non-repeatable option (alias)
    # Subtest: option name with mentioned non-repeatable option (alias 2)
        ok 1 - result
        1..1
    ok 16 - option name with mentioned non-repeatable option (alias 2)
    # Subtest: option name with mentioned non-repeatable option (bundling)
        ok 1 - result
        1..1
    ok 17 - option name with mentioned non-repeatable option (bundling)
    # Subtest: repeatable option name 1 (assigned to arrayref)
        ok 1 - result
        1..1
    ok 18 - repeatable option name 1 (assigned to arrayref)
    # Subtest: repeatable option name 2 (desttype @)
        ok 1 - result
        1..1
    ok 19 - repeatable option name 2 (desttype @)
    # Subtest: repeatable option name 3 (desttype %)
        ok 1 - result
        1..1
    ok 20 - repeatable option name 3 (desttype %)
    # Subtest: repeatable option name 4 (incremental)
        ok 1 - result
        1..1
    ok 21 - repeatable option name 4 (incremental)
    # Subtest: option name + arg completion
        ok 1 - result
        1..1
    ok 22 - option name + arg completion
    # Subtest: option name only (user types -)
        ok 1 - result
        1..1
    ok 23 - option name only (user types -)
    # Subtest: option value without completion routine
        ok 1 - result
        1..1
    ok 24 - option value without completion routine
    # Subtest: option value without completion routine (2)
        ok 1 - result
        1..1
    ok 25 - option value without completion routine (2)
    # Subtest: option value for unknown option
        ok 1 - result
        1..1
    ok 26 - option value for unknown option
    # Subtest: option value for option that does not expect value
        ok 1 - result
        1..1
    ok 27 - option value for option that does not expect value
    # Subtest: option value with completion routine returning array
        ok 1 - result
        1..1
    ok 28 - option value with completion routine returning array
    # Subtest: extras argument
        ok 1 - result
        1..1
    ok 29 - extras argument
    1..29
ok 1 - basics
# Subtest: config bundling=0
    # Subtest: basics
        ok 1 - result
        1..1
    ok 1 - basics
    1..1
ok 2 - config bundling=0
# Subtest: arg:summaries
    # Subtest: basics
        ok 1 - result
        1..1
    ok 1 - basics
    1..1
ok 3 - arg:summaries
# Subtest: default fallback completion
    # Subtest: file fallback completion
        ok 1 - result
        1..1
    ok 1 - file fallback completion
    1..1
ok 4 - default fallback completion
1..4
ok
t/release-rinci.t ........ skipped: these tests are for release candidate testing
All tests successful.
Files=6, Tests=5,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.25 cusr  0.04 csys =  0.33 CPU)
Result: PASS
  PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Complete-Getopt-Long" VERSION="0.470" DATE="2019-06-25">
  <AUTHOR CPAN="PERLANCAR">perlancar &lt;perlancar@gmail.com></AUTHOR>
  <ABSTRACT>Complete command-line argument using Getopt::Long specification</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.24"/>
  <CODEBASE HREF="Complete-Getopt-Long-0.470.tar.gz"/>
  <PROVIDE NAME="Complete::Getopt::Long" VERSION="0.470"/>
  <REQUIRE NAME="Complete::Env"/>
  <REQUIRE NAME="Complete::File"/>
  <REQUIRE NAME="Complete::Util" VERSION="0.601"/>
  <REQUIRE NAME="Exporter::" VERSION="5.57"/>
  <REQUIRE NAME="Getopt::Long::Util" VERSION="0.890"/>
  <REQUIRE NAME="String::Wildcard::Bash"/>
  <REQUIRE NAME="strict::"/>
  <REQUIRE NAME="warnings::"/>
  <!-- Built 2019-06-27 with ActivePerl-2400 on perl-osx (Mac OS X 10.9.5) log Complete-Getopt-Long-0.470.d/log-20190627T020941.txt -->
</SOFTPKG>
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Complete-Getopt-Long-0.470-M8ipQq && tar cvf - Complete-Getopt-Long-0.470.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/P/PE/PERLANCAR/Complete-Getopt-Long-0.470.tar.gz
Complete-Getopt-Long-0.470.ppd
blib/
blib/lib/
blib/lib/Complete/
blib/lib/Complete/Getopt/
blib/lib/Complete/Getopt/Long.pm
blib/man3/
blib/man3/Complete::Getopt::Long.3
Finished 2019-06-27T02:09:47