PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin Start 2018-06-06T02:12:03 ActivePerl-2400 CPAN-2.10 Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata' Database was generated on Tue, 05 Jun 2018 05:41:02 GMT Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz ok Data-Sah-Coerce-perl-str-str_trim-0.002 Data-Sah-Coerce-perl-str-str_trim-0.002/README Data-Sah-Coerce-perl-str-str_trim-0.002/Changes Data-Sah-Coerce-perl-str-str_trim-0.002/LICENSE Data-Sah-Coerce-perl-str-str_trim-0.002/dist.ini Data-Sah-Coerce-perl-str-str_trim-0.002/META.yml Data-Sah-Coerce-perl-str-str_trim-0.002/MANIFEST Data-Sah-Coerce-perl-str-str_trim-0.002/META.json Data-Sah-Coerce-perl-str-str_trim-0.002/weaver.ini Data-Sah-Coerce-perl-str-str_trim-0.002/Makefile.PL Data-Sah-Coerce-perl-str-str_trim-0.002/t Data-Sah-Coerce-perl-str-str_trim-0.002/t/00-compile.t Data-Sah-Coerce-perl-str-str_trim-0.002/t/perl-str_trim.t Data-Sah-Coerce-perl-str-str_trim-0.002/t/author-critic.t Data-Sah-Coerce-perl-str-str_trim-0.002/t/perl-str_rtrim.t Data-Sah-Coerce-perl-str-str_trim-0.002/t/perl-str_ltrim.t Data-Sah-Coerce-perl-str-str_trim-0.002/t/author-pod-syntax.t Data-Sah-Coerce-perl-str-str_trim-0.002/t/author-pod-coverage.t Data-Sah-Coerce-perl-str-str_trim-0.002/lib/Data/Sah/Coerce/perl/str Data-Sah-Coerce-perl-str-str_trim-0.002/lib/Data/Sah/Coerce/perl/str/str_trim.pm Data-Sah-Coerce-perl-str-str_trim-0.002/lib/Data/Sah/Coerce/perl/str/str_ltrim.pm Data-Sah-Coerce-perl-str-str_trim-0.002/lib/Data/Sah/Coerce/perl/str/str_rtrim.pm Configuring P/PE/PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Data::Sah::Coerce::perl::str::str_trim Writing MYMETA.yml and MYMETA.json PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz >>> make cp lib/Data/Sah/Coerce/perl/str/str_ltrim.pm blib/lib/Data/Sah/Coerce/perl/str/str_ltrim.pm cp lib/Data/Sah/Coerce/perl/str/str_trim.pm blib/lib/Data/Sah/Coerce/perl/str/str_trim.pm cp lib/Data/Sah/Coerce/perl/str/str_rtrim.pm blib/lib/Data/Sah/Coerce/perl/str/str_rtrim.pm Manifying 3 pod documents PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-compile.t ........... 1..3 ok 1 - Data/Sah/Coerce/perl/str/str_ltrim.pm loaded ok ok 2 - Data/Sah/Coerce/perl/str/str_rtrim.pm loaded ok ok 3 - Data/Sah/Coerce/perl/str/str_trim.pm loaded ok ok t/author-critic.t ........ skipped: these tests are for testing by the author t/author-pod-coverage.t .. skipped: these tests are for testing by the author t/author-pod-syntax.t .... skipped: these tests are for testing by the author Only coercion rule module 'Data::Sah::Coerce::perl::str::str_tolowerfirst' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_perl_modname' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pm_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pm_or_pod_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pod_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_cryptoexchange_account' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pod_or_pm_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_tolower' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_perl_distname' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_toupperfirst' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_toupper' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. t/perl-str_ltrim.t ....... # Subtest: basics ok 1 - hashref uncoerced ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 1..9 ok 1 - basics 1..1 ok Only coercion rule module 'Data::Sah::Coerce::perl::str::str_toupperfirst' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pod_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_toupper' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_tolowerfirst' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pm_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_perl_distname' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_perl_modname' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_tolower' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pod_or_pm_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_cryptoexchange_account' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pm_or_pod_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. t/perl-str_rtrim.t ....... # Subtest: basics ok 1 - hashref uncoerced ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 1..9 ok 1 - basics 1..1 ok Only coercion rule module 'Data::Sah::Coerce::perl::str::str_toupperfirst' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_toupper' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_perl_distname' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_tolowerfirst' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_cryptoexchange_account' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pod_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pm_or_pod_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pm_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_tolower' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_convert_perl_pod_or_pm_to_path' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. Only coercion rule module 'Data::Sah::Coerce::perl::str::str_normalize_perl_modname' following metadata version 3 is supported, this rule module follows metadata version 2 and will not be used at /Users/fly2400/cpanfly-5.24/var/megalib/Data/Sah/CoerceCommon.pm line 229. t/perl-str_trim.t ........ # Subtest: basics ok 1 - hashref uncoerced ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 1..9 ok 1 - basics 1..1 ok All tests successful. Files=7, Tests=6, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.24 cusr 0.05 csys = 0.33 CPU) Result: PASS PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz make test TEST_VERBOSE=1 -- OK perlancar <perlancar@gmail.com> Trim whitespaces at the beginning and end of string >>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Data-Sah-Coerce-perl-str-str_trim-0.002-RbZ1At && tar cvf - Data-Sah-Coerce-perl-str-str_trim-0.002.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/P/PE/PERLANCAR/Data-Sah-Coerce-perl-str-str_trim-0.002.tar.gz Data-Sah-Coerce-perl-str-str_trim-0.002.ppd blib/ blib/lib/ blib/lib/Data/ blib/lib/Data/Sah/ blib/lib/Data/Sah/Coerce/ blib/lib/Data/Sah/Coerce/perl/ blib/lib/Data/Sah/Coerce/perl/str/ blib/lib/Data/Sah/Coerce/perl/str/str_ltrim.pm blib/lib/Data/Sah/Coerce/perl/str/str_rtrim.pm blib/lib/Data/Sah/Coerce/perl/str/str_trim.pm blib/man3/ blib/man3/Data::Sah::Coerce::perl::str::str_ltrim.3 blib/man3/Data::Sah::Coerce::perl::str::str_rtrim.3 blib/man3/Data::Sah::Coerce::perl::str::str_trim.3 Finished 2018-06-06T02:12:05