PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin Start 2018-12-05T02:03:08 ActivePerl-2400 CPAN-2.10 Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata' Database was generated on Tue, 04 Dec 2018 06:54:28 GMT Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Sah-Schemas-Perl-0.015.tar.gz ok Sah-Schemas-Perl-0.015/ Sah-Schemas-Perl-0.015/MANIFEST Sah-Schemas-Perl-0.015/weaver.ini Sah-Schemas-Perl-0.015/README Sah-Schemas-Perl-0.015/META.json Sah-Schemas-Perl-0.015/Makefile.PL Sah-Schemas-Perl-0.015/META.yml Sah-Schemas-Perl-0.015/lib/ Sah-Schemas-Perl-0.015/lib/Sah/ Sah-Schemas-Perl-0.015/lib/Sah/Schema/ Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/ Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/pm_filename.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/pod_or_pm_filename.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/version.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/modargs.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/distname.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/pod_filename.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/filename.pm Sah-Schemas-Perl-0.015/lib/Sah/Schema/perl/modname.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/ Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/ Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/pm_filename.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/pod_or_pm_filename.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/version.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/modargs.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/distname.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/pod_filename.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/filename.pm Sah-Schemas-Perl-0.015/lib/Sah/SchemaR/perl/modname.pm Sah-Schemas-Perl-0.015/lib/Sah/Schemas/ Sah-Schemas-Perl-0.015/lib/Sah/Schemas/Perl.pm Sah-Schemas-Perl-0.015/lib/Data/ Sah-Schemas-Perl-0.015/lib/Data/Sah/ Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/ Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/ Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/obj/ Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/obj/str_perl_version.pm Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/ Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/str_convert_perl_pod_to_path.pm Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/str_normalize_perl_distname.pm Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/str_convert_perl_pm_to_path.pm Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/str_convert_perl_pod_or_pm_to_path.pm Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/str_convert_perl_pm_or_pod_to_path.pm Sah-Schemas-Perl-0.015/lib/Data/Sah/Coerce/perl/str/str_normalize_perl_modname.pm Sah-Schemas-Perl-0.015/Changes Sah-Schemas-Perl-0.015/t/ Sah-Schemas-Perl-0.015/t/perl-version.t Sah-Schemas-Perl-0.015/t/perl-pod_filename.t Sah-Schemas-Perl-0.015/t/perl-pm_filename.t Sah-Schemas-Perl-0.015/t/00-compile.t Sah-Schemas-Perl-0.015/t/perl-filename.t Sah-Schemas-Perl-0.015/t/perl-distname.t Sah-Schemas-Perl-0.015/t/perl-modname.t Sah-Schemas-Perl-0.015/t/author-pod-syntax.t Sah-Schemas-Perl-0.015/t/perl-pod_or_pm_filename.t Sah-Schemas-Perl-0.015/t/author-pod-coverage.t Sah-Schemas-Perl-0.015/t/author-critic.t Sah-Schemas-Perl-0.015/LICENSE Sah-Schemas-Perl-0.015/dist.ini Configuring P/PE/PERLANCAR/Sah-Schemas-Perl-0.015.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::XCompletion::perl_distname 0 not found. Warning: prerequisite Perinci::Sub::XCompletion::perl_modname 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Sah::Schemas::Perl Writing MYMETA.yml and MYMETA.json PERLANCAR/Sah-Schemas-Perl-0.015.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Sah-Schemas-Perl-0.015.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Sah-Schemas-Perl-0.015.tar.gz ---- Perinci::Sub::XCompletion::perl_distname [requires] Perinci::Sub::XCompletion::perl_modname [requires] Running test for module 'Perinci::Sub::XCompletion::perl_distname' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-XCompletion-0.09.tar.gz ok Perinci-Sub-XCompletion-0.09/ Perinci-Sub-XCompletion-0.09/META.json Perinci-Sub-XCompletion-0.09/LICENSE Perinci-Sub-XCompletion-0.09/Changes Perinci-Sub-XCompletion-0.09/META.yml Perinci-Sub-XCompletion-0.09/Makefile.PL Perinci-Sub-XCompletion-0.09/t/ Perinci-Sub-XCompletion-0.09/t/author-pod-coverage.t Perinci-Sub-XCompletion-0.09/t/release-rinci.t Perinci-Sub-XCompletion-0.09/t/author-pod-syntax.t Perinci-Sub-XCompletion-0.09/t/00-compile.t Perinci-Sub-XCompletion-0.09/README Perinci-Sub-XCompletion-0.09/dist.ini Perinci-Sub-XCompletion-0.09/lib/ Perinci-Sub-XCompletion-0.09/lib/Perinci/ Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/ Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion/ Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion/dirname.pm Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion/filename.pm Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion/perl_distname.pm Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion/perl_modname.pm Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion/riap_url.pm Perinci-Sub-XCompletion-0.09/lib/Perinci/Sub/XCompletion.pm Perinci-Sub-XCompletion-0.09/MANIFEST Perinci-Sub-XCompletion-0.09/weaver.ini Configuring P/PE/PERLANCAR/Perinci-Sub-XCompletion-0.09.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Complete::Riap 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::XCompletion Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-XCompletion-0.09.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-XCompletion-0.09.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-XCompletion-0.09.tar.gz ---- Complete::Riap [requires] Running test for module 'Complete::Riap' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Complete-Riap-0.07.tar.gz ok Complete-Riap-0.07/ Complete-Riap-0.07/META.json Complete-Riap-0.07/LICENSE Complete-Riap-0.07/Changes Complete-Riap-0.07/META.yml Complete-Riap-0.07/Makefile.PL Complete-Riap-0.07/t/ Complete-Riap-0.07/t/release-pod-syntax.t Complete-Riap-0.07/t/release-pod-coverage.t Complete-Riap-0.07/t/release-rinci.t Complete-Riap-0.07/t/00-compile.t Complete-Riap-0.07/README Complete-Riap-0.07/dist.ini Complete-Riap-0.07/lib/ Complete-Riap-0.07/lib/Complete/ Complete-Riap-0.07/lib/Complete/Riap.pm Complete-Riap-0.07/MANIFEST Complete-Riap-0.07/weaver.ini Configuring P/PE/PERLANCAR/Complete-Riap-0.07.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Access 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Complete::Riap Writing MYMETA.yml and MYMETA.json PERLANCAR/Complete-Riap-0.07.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Complete-Riap-0.07.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Complete-Riap-0.07.tar.gz ---- Perinci::Access [requires] Running test for module 'Perinci::Access' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Access-0.45.tar.gz ok Perinci-Access-0.45/ Perinci-Access-0.45/README Perinci-Access-0.45/lib/ Perinci-Access-0.45/lib/Perinci/ Perinci-Access-0.45/lib/Perinci/Access/ Perinci-Access-0.45/lib/Perinci/Access/Manual/ Perinci-Access-0.45/lib/Perinci/Access/Manual/FAQ.pod Perinci-Access-0.45/lib/Perinci/Access/Manual/Examples.pod Perinci-Access-0.45/lib/Perinci/Access/Manual.pod Perinci-Access-0.45/lib/Perinci/Access.pm Perinci-Access-0.45/Makefile.PL Perinci-Access-0.45/Changes Perinci-Access-0.45/dist.ini Perinci-Access-0.45/LICENSE Perinci-Access-0.45/t/ Perinci-Access-0.45/t/00-compile.t Perinci-Access-0.45/t/01-basics.t Perinci-Access-0.45/t/author-pod-syntax.t Perinci-Access-0.45/t/author-pod-coverage.t Perinci-Access-0.45/weaver.ini Perinci-Access-0.45/MANIFEST Perinci-Access-0.45/META.json Perinci-Access-0.45/META.yml Configuring P/PE/PERLANCAR/Perinci-Access-0.45.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Access::Perl 0.87 not found. Warning: prerequisite Perinci::Access::Schemeless 0.87 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Access Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Access-0.45.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Access-0.45.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Access-0.45.tar.gz ---- Perinci::Access::Perl [requires] Perinci::Access::Schemeless [requires] Running test for module 'Perinci::Access::Perl' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Access-Perl-0.88.tar.gz ok Perinci-Access-Perl-0.88/ Perinci-Access-Perl-0.88/README Perinci-Access-Perl-0.88/lib/ Perinci-Access-Perl-0.88/lib/Perinci/ Perinci-Access-Perl-0.88/lib/Perinci/Access/ Perinci-Access-Perl-0.88/lib/Perinci/Access/Schemeless.pm Perinci-Access-Perl-0.88/lib/Perinci/Access/Perl.pm Perinci-Access-Perl-0.88/Makefile.PL Perinci-Access-Perl-0.88/Changes Perinci-Access-Perl-0.88/dist.ini Perinci-Access-Perl-0.88/LICENSE Perinci-Access-Perl-0.88/t/ Perinci-Access-Perl-0.88/t/00-compile.t Perinci-Access-Perl-0.88/t/schemeless-patch.t Perinci-Access-Perl-0.88/t/perl.t Perinci-Access-Perl-0.88/t/author-pod-syntax.t Perinci-Access-Perl-0.88/t/author-pod-coverage.t Perinci-Access-Perl-0.88/t/schemeless.t Perinci-Access-Perl-0.88/weaver.ini Perinci-Access-Perl-0.88/MANIFEST Perinci-Access-Perl-0.88/META.json Perinci-Access-Perl-0.88/META.yml Configuring P/PE/PERLANCAR/Perinci-Access-Perl-0.88.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::Complete 0.89 not found. Warning: prerequisite Perinci::Sub::GetArgs::Argv 0.80 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Access::Perl Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Access-Perl-0.88.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Access-Perl-0.88.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Access-Perl-0.88.tar.gz ---- Perinci::Sub::Complete [requires] Perinci::Sub::GetArgs::Argv [requires] Running test for module 'Perinci::Sub::Complete' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.931.tar.gz ok Perinci-Sub-Complete-0.931 Perinci-Sub-Complete-0.931/README Perinci-Sub-Complete-0.931/Changes Perinci-Sub-Complete-0.931/LICENSE Perinci-Sub-Complete-0.931/dist.ini Perinci-Sub-Complete-0.931/META.yml Perinci-Sub-Complete-0.931/MANIFEST Perinci-Sub-Complete-0.931/META.json Perinci-Sub-Complete-0.931/weaver.ini Perinci-Sub-Complete-0.931/Makefile.PL Perinci-Sub-Complete-0.931/t Perinci-Sub-Complete-0.931/t/00-compile.t Perinci-Sub-Complete-0.931/t/author-critic.t Perinci-Sub-Complete-0.931/t/release-rinci.t Perinci-Sub-Complete-0.931/t/complete_cli_arg.t Perinci-Sub-Complete-0.931/t/complete_arg_val.t Perinci-Sub-Complete-0.931/t/complete_arg_elem.t Perinci-Sub-Complete-0.931/t/author-pod-syntax.t Perinci-Sub-Complete-0.931/t/complete_arg_index.t Perinci-Sub-Complete-0.931/t/author-pod-coverage.t Perinci-Sub-Complete-0.931/t/complete_from_schema.t Perinci-Sub-Complete-0.931/lib/Perinci/Sub Perinci-Sub-Complete-0.931/lib/Perinci/Sub/Complete.pm Configuring P/PE/PERLANCAR/Perinci-Sub-Complete-0.931.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Perinci::Sub::GetArgs::Argv 0.83 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::Complete Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-Complete-0.931.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.931.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-Complete-0.931.tar.gz ---- Perinci::Sub::GetArgs::Argv [requires] Running test for module 'Perinci::Sub::GetArgs::Argv' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.840.tar.gz ok Perinci-Sub-GetArgs-Argv-0.840/ Perinci-Sub-GetArgs-Argv-0.840/README Perinci-Sub-GetArgs-Argv-0.840/dist.ini Perinci-Sub-GetArgs-Argv-0.840/Makefile.PL Perinci-Sub-GetArgs-Argv-0.840/META.yml Perinci-Sub-GetArgs-Argv-0.840/t/ Perinci-Sub-GetArgs-Argv-0.840/t/author-critic.t Perinci-Sub-GetArgs-Argv-0.840/t/author-pod-syntax.t Perinci-Sub-GetArgs-Argv-0.840/t/release-rinci.t Perinci-Sub-GetArgs-Argv-0.840/t/00-compile.t Perinci-Sub-GetArgs-Argv-0.840/t/get_args_from_argv.t Perinci-Sub-GetArgs-Argv-0.840/t/gen_getopt_long_spec_from_meta.t Perinci-Sub-GetArgs-Argv-0.840/t/_is_simple_or_array_of_simple_or_hash_of_simple.t Perinci-Sub-GetArgs-Argv-0.840/t/author-pod-coverage.t Perinci-Sub-GetArgs-Argv-0.840/weaver.ini Perinci-Sub-GetArgs-Argv-0.840/META.json Perinci-Sub-GetArgs-Argv-0.840/MANIFEST Perinci-Sub-GetArgs-Argv-0.840/lib/ Perinci-Sub-GetArgs-Argv-0.840/lib/Perinci/ Perinci-Sub-GetArgs-Argv-0.840/lib/Perinci/Sub/ Perinci-Sub-GetArgs-Argv-0.840/lib/Perinci/Sub/GetArgs/ Perinci-Sub-GetArgs-Argv-0.840/lib/Perinci/Sub/GetArgs/Argv.pm Perinci-Sub-GetArgs-Argv-0.840/LICENSE Perinci-Sub-GetArgs-Argv-0.840/Changes Configuring P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.840.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Data::Clean::FromJSON 0.11 not found. Warning: prerequisite Data::Clean::JSON 0.38 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Perinci::Sub::GetArgs::Argv Writing MYMETA.yml and MYMETA.json PERLANCAR/Perinci-Sub-GetArgs-Argv-0.840.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Perinci-Sub-GetArgs-Argv-0.840.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Perinci-Sub-GetArgs-Argv-0.840.tar.gz ---- Data::Clean::FromJSON [requires] Data::Clean::JSON [build_requires] Running test for module 'Data::Clean::FromJSON' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Data-Clean-JSON-0.391.tar.gz ok Data-Clean-JSON-0.391/ Data-Clean-JSON-0.391/MANIFEST Data-Clean-JSON-0.391/weaver.ini Data-Clean-JSON-0.391/README Data-Clean-JSON-0.391/META.json Data-Clean-JSON-0.391/Makefile.PL Data-Clean-JSON-0.391/META.yml Data-Clean-JSON-0.391/lib/ Data-Clean-JSON-0.391/lib/Data/ Data-Clean-JSON-0.391/lib/Data/Clean/ Data-Clean-JSON-0.391/lib/Data/Clean/JSON.pm Data-Clean-JSON-0.391/lib/Data/Clean/FromJSON.pm Data-Clean-JSON-0.391/Changes Data-Clean-JSON-0.391/t/ Data-Clean-JSON-0.391/t/00-compile.t Data-Clean-JSON-0.391/t/json.t Data-Clean-JSON-0.391/t/from_json.t Data-Clean-JSON-0.391/t/author-pod-syntax.t Data-Clean-JSON-0.391/t/author-pod-coverage.t Data-Clean-JSON-0.391/t/author-critic.t Data-Clean-JSON-0.391/LICENSE Data-Clean-JSON-0.391/dist.ini Configuring P/PE/PERLANCAR/Data-Clean-JSON-0.391.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Data::Clean 0.500 not found. Warning: prerequisite DateTime 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Data::Clean::JSON Writing MYMETA.yml and MYMETA.json PERLANCAR/Data-Clean-JSON-0.391.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Data-Clean-JSON-0.391.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Data-Clean-JSON-0.391.tar.gz ---- Data::Clean [requires] DateTime [build_requires] Running test for module 'Data::Clean' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/P/PE/PERLANCAR/Data-Clean-0.502.tar.gz ok Data-Clean-0.502/ Data-Clean-0.502/META.json Data-Clean-0.502/LICENSE Data-Clean-0.502/Changes Data-Clean-0.502/META.yml Data-Clean-0.502/Makefile.PL Data-Clean-0.502/t/ Data-Clean-0.502/t/author-pod-coverage.t Data-Clean-0.502/t/01-basic.t Data-Clean-0.502/t/author-critic.t Data-Clean-0.502/t/author-pod-syntax.t Data-Clean-0.502/t/00-compile.t Data-Clean-0.502/README Data-Clean-0.502/dist.ini Data-Clean-0.502/lib/ Data-Clean-0.502/lib/Data/ Data-Clean-0.502/lib/Data/Clean.pm Data-Clean-0.502/MANIFEST Data-Clean-0.502/weaver.ini Configuring P/PE/PERLANCAR/Data-Clean-0.502.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite DateTime 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Data::Clean Writing MYMETA.yml and MYMETA.json PERLANCAR/Data-Clean-0.502.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for P/PE/PERLANCAR/Data-Clean-0.502.tar.gz ---- Unsatisfied dependencies detected during ---- ---- PERLANCAR/Data-Clean-0.502.tar.gz ---- DateTime [build_requires] Running test for module 'DateTime' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/D/DR/DROLSKY/DateTime-1.50.tar.gz ok DateTime-1.50/ DateTime-1.50/lib/ DateTime-1.50/lib/DateTime/ DateTime-1.50/lib/DateTime/Helpers.pm DateTime-1.50/lib/DateTime/PP.pm DateTime-1.50/lib/DateTime/Types.pm DateTime-1.50/lib/DateTime/Duration.pm DateTime-1.50/lib/DateTime/Infinite.pm DateTime-1.50/lib/DateTime/Conflicts.pm DateTime-1.50/lib/DateTime/LeapSecond.pm DateTime-1.50/lib/DateTime/PPExtra.pm DateTime-1.50/lib/DateTime.pm DateTime-1.50/cpanfile DateTime-1.50/perlcriticrc DateTime-1.50/INSTALL DateTime-1.50/appveyor.yml DateTime-1.50/inc/ DateTime-1.50/inc/LeapSecondsHeader.pm DateTime-1.50/LICENSE DateTime-1.50/tidyall.ini DateTime-1.50/CREDITS DateTime-1.50/CONTRIBUTING.md DateTime-1.50/Changes DateTime-1.50/META.json DateTime-1.50/CODE_OF_CONDUCT.md DateTime-1.50/leap_seconds.h DateTime-1.50/dist.ini DateTime-1.50/TODO DateTime-1.50/perltidyrc DateTime-1.50/MANIFEST DateTime-1.50/META.yml DateTime-1.50/ppport.h DateTime-1.50/t/ DateTime-1.50/t/04epoch.t DateTime-1.50/t/12week.t DateTime-1.50/t/22from-doy.t DateTime-1.50/t/05set.t DateTime-1.50/t/31formatter.t DateTime-1.50/t/36invalid-local.t DateTime-1.50/t/17set-return.t DateTime-1.50/t/33seconds-offset.t DateTime-1.50/t/34set-tz.t DateTime-1.50/t/03components.t DateTime-1.50/t/02last-day.t DateTime-1.50/t/13strftime.t DateTime-1.50/t/48rt-115983.t DateTime-1.50/t/39no-so.t DateTime-1.50/t/26dt-leapsecond-pm.t DateTime-1.50/t/25add-subtract.t DateTime-1.50/t/00-report-prereqs.t DateTime-1.50/t/37local-add.t DateTime-1.50/t/06add.t DateTime-1.50/t/29overload.t DateTime-1.50/t/28dow.t DateTime-1.50/t/23storable.t DateTime-1.50/t/14locale.t DateTime-1.50/t/43new-params.t DateTime-1.50/t/00-report-prereqs.dd DateTime-1.50/t/42duration-class.t DateTime-1.50/t/46warnings.t DateTime-1.50/t/47default-time-zone.t DateTime-1.50/t/45core-time.t DateTime-1.50/t/21bad-params.t DateTime-1.50/t/09greg.t DateTime-1.50/t/35rd-values.t DateTime-1.50/t/38local-subtract.t DateTime-1.50/t/10subtract.t DateTime-1.50/t/01sanity.t DateTime-1.50/t/40leap-years.t DateTime-1.50/t/19leap-second.t DateTime-1.50/t/30future-tz.t DateTime-1.50/t/27delta.t DateTime-1.50/t/07compare.t DateTime-1.50/t/00load.t DateTime-1.50/t/44set-formatter.t DateTime-1.50/t/11duration.t DateTime-1.50/t/zzz-check-breaks.t DateTime-1.50/t/18today.t DateTime-1.50/t/24from-object.t DateTime-1.50/t/20infinite.t DateTime-1.50/t/32leap-second2.t DateTime-1.50/t/15jd.t DateTime-1.50/t/41cldr-format.t DateTime-1.50/t/16truncate.t DateTime-1.50/README.md DateTime-1.50/Makefile.PL DateTime-1.50/xt/ DateTime-1.50/xt/author/ DateTime-1.50/xt/author/pp-31formatter.t DateTime-1.50/xt/author/pp-43new-params.t DateTime-1.50/xt/author/pp-03components.t DateTime-1.50/xt/author/pp-17set-return.t DateTime-1.50/xt/author/pp-10subtract.t DateTime-1.50/xt/author/pp-46warnings.t DateTime-1.50/xt/author/pp-19leap-second.t DateTime-1.50/xt/author/pp-00load.t DateTime-1.50/xt/author/pp-47default-time-zone.t DateTime-1.50/xt/author/pp-48rt-115983.t DateTime-1.50/xt/author/pp-20infinite.t DateTime-1.50/xt/author/pp-40leap-years.t DateTime-1.50/xt/author/pp-21bad-params.t DateTime-1.50/xt/author/pp-07compare.t DateTime-1.50/xt/author/pod-coverage.t DateTime-1.50/xt/author/pp-11duration.t DateTime-1.50/xt/author/pp-44set-formatter.t DateTime-1.50/xt/author/pp-29overload.t DateTime-1.50/xt/author/pp-35rd-values.t DateTime-1.50/xt/author/clean-namespaces.t DateTime-1.50/xt/author/no-tabs.t DateTime-1.50/xt/author/pp-30future-tz.t DateTime-1.50/xt/author/pp-13strftime.t DateTime-1.50/xt/author/pp-12week.t DateTime-1.50/xt/author/pp-24from-object.t DateTime-1.50/xt/author/pp-16truncate.t DateTime-1.50/xt/author/pp-01sanity.t DateTime-1.50/xt/author/pp-34set-tz.t DateTime-1.50/xt/author/pp-14locale.t DateTime-1.50/xt/author/pp-25add-subtract.t DateTime-1.50/xt/author/pp-32leap-second2.t DateTime-1.50/xt/author/pp-02last-day.t DateTime-1.50/xt/author/pp-09greg.t DateTime-1.50/xt/author/pp-05set.t DateTime-1.50/xt/author/pod-spell.t DateTime-1.50/xt/author/xs-is-loaded.t DateTime-1.50/xt/author/pp-42duration-class.t DateTime-1.50/xt/author/pp-18today.t DateTime-1.50/xt/author/pp-23storable.t DateTime-1.50/xt/author/pp-22from-doy.t DateTime-1.50/xt/author/pp-04epoch.t DateTime-1.50/xt/author/pp-15jd.t DateTime-1.50/xt/author/pp-38local-subtract.t DateTime-1.50/xt/author/test-all-my-deps.t DateTime-1.50/xt/author/mojibake.t DateTime-1.50/xt/author/pp-33seconds-offset.t DateTime-1.50/xt/author/pp-41cldr-format.t DateTime-1.50/xt/author/pp-37local-add.t DateTime-1.50/xt/author/tidyall.t DateTime-1.50/xt/author/pp-06add.t DateTime-1.50/xt/author/pp-36invalid-local.t DateTime-1.50/xt/author/pp-27delta.t DateTime-1.50/xt/author/eol.t DateTime-1.50/xt/author/test-version.t DateTime-1.50/xt/author/pp-45core-time.t DateTime-1.50/xt/author/portability.t DateTime-1.50/xt/author/pod-syntax.t DateTime-1.50/xt/author/pp-is-loaded.t DateTime-1.50/xt/author/pp-28dow.t DateTime-1.50/xt/release/ DateTime-1.50/xt/release/cpan-changes.t DateTime-1.50/xt/release/meta-json.t DateTime-1.50/leaptab.txt DateTime-1.50/DateTime.xs Configuring D/DR/DROLSKY/DateTime-1.50.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite DateTime::Locale 1.06 not found. Warning: prerequisite DateTime::TimeZone 2.02 not found. Warning: prerequisite namespace::autoclean 0.19 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for DateTime Writing MYMETA.yml and MYMETA.json DROLSKY/DateTime-1.50.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for D/DR/DROLSKY/DateTime-1.50.tar.gz ---- Unsatisfied dependencies detected during ---- ---- DROLSKY/DateTime-1.50.tar.gz ---- namespace::autoclean [requires] DateTime::Locale [requires] DateTime::TimeZone [requires] Running test for module 'namespace::autoclean' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/E/ET/ETHER/namespace-autoclean-0.28.tar.gz ok namespace-autoclean-0.28/ namespace-autoclean-0.28/Changes namespace-autoclean-0.28/CONTRIBUTING namespace-autoclean-0.28/dist.ini namespace-autoclean-0.28/INSTALL namespace-autoclean-0.28/lib/ namespace-autoclean-0.28/LICENCE namespace-autoclean-0.28/Makefile.PL namespace-autoclean-0.28/MANIFEST namespace-autoclean-0.28/META.json namespace-autoclean-0.28/META.yml namespace-autoclean-0.28/README namespace-autoclean-0.28/t/ namespace-autoclean-0.28/xt/ namespace-autoclean-0.28/xt/author/ namespace-autoclean-0.28/xt/basic.t namespace-autoclean-0.28/xt/class_mop.t namespace-autoclean-0.28/xt/lib/ namespace-autoclean-0.28/xt/moo.t namespace-autoclean-0.28/xt/moose-parameterized-role.t namespace-autoclean-0.28/xt/moose.t namespace-autoclean-0.28/xt/mouse.t namespace-autoclean-0.28/xt/overload.t namespace-autoclean-0.28/xt/release/ namespace-autoclean-0.28/xt/role_tiny.t namespace-autoclean-0.28/xt/release/changes_has_content.t namespace-autoclean-0.28/xt/release/cpan-changes.t namespace-autoclean-0.28/xt/release/distmeta.t namespace-autoclean-0.28/xt/release/minimum-version.t namespace-autoclean-0.28/xt/release/pod-coverage.t namespace-autoclean-0.28/xt/release/pod-no404s.t namespace-autoclean-0.28/xt/release/pod-syntax.t namespace-autoclean-0.28/xt/release/portability.t namespace-autoclean-0.28/xt/lib/ClassMOPClean.pm namespace-autoclean-0.28/xt/lib/ClassMOPDirty.pm namespace-autoclean-0.28/xt/lib/Clean.pm namespace-autoclean-0.28/xt/lib/Composer.pm namespace-autoclean-0.28/xt/lib/Dirty.pm namespace-autoclean-0.28/xt/lib/DoesNotCompile.pm namespace-autoclean-0.28/xt/lib/ExporterModule.pm namespace-autoclean-0.28/xt/lib/MooseExporter.pm namespace-autoclean-0.28/xt/lib/MooseyClean.pm namespace-autoclean-0.28/xt/lib/MooseyComposer.pm namespace-autoclean-0.28/xt/lib/MooseyDirty.pm namespace-autoclean-0.28/xt/lib/MooseyParameterizedComposer.pm namespace-autoclean-0.28/xt/lib/MooseyParameterizedRole.pm namespace-autoclean-0.28/xt/lib/MooseyRole.pm namespace-autoclean-0.28/xt/lib/MooyClean.pm namespace-autoclean-0.28/xt/lib/MooyComposer.pm namespace-autoclean-0.28/xt/lib/MooyDirty.pm namespace-autoclean-0.28/xt/lib/MooyRole.pm namespace-autoclean-0.28/xt/lib/MouseyClean.pm namespace-autoclean-0.28/xt/lib/MouseyComposer.pm namespace-autoclean-0.28/xt/lib/MouseyDirty.pm namespace-autoclean-0.28/xt/lib/MouseyRole.pm namespace-autoclean-0.28/xt/lib/Overloader.pm namespace-autoclean-0.28/xt/lib/Role.pm namespace-autoclean-0.28/xt/lib/SubClean.pm namespace-autoclean-0.28/xt/lib/SubDirty.pm namespace-autoclean-0.28/xt/lib/SubExporterModule.pm namespace-autoclean-0.28/xt/author/00-compile.t namespace-autoclean-0.28/xt/author/clean-namespaces.t namespace-autoclean-0.28/xt/author/eol.t namespace-autoclean-0.28/xt/author/kwalitee.t namespace-autoclean-0.28/xt/author/mojibake.t namespace-autoclean-0.28/xt/author/no-tabs.t namespace-autoclean-0.28/xt/author/pod-spell.t namespace-autoclean-0.28/t/00-report-prereqs.dd namespace-autoclean-0.28/t/00-report-prereqs.t namespace-autoclean-0.28/t/also.t namespace-autoclean-0.28/t/basic.t namespace-autoclean-0.28/t/broken_meta.t namespace-autoclean-0.28/t/cleanee.t namespace-autoclean-0.28/t/constant.t namespace-autoclean-0.28/t/except.t namespace-autoclean-0.28/t/matchclean.t namespace-autoclean-0.28/t/moo-with-moose.t namespace-autoclean-0.28/t/moo.t namespace-autoclean-0.28/t/moose-withoverloading.t namespace-autoclean-0.28/t/moose.t namespace-autoclean-0.28/t/mouse-pp.t namespace-autoclean-0.28/t/mouse.t namespace-autoclean-0.28/t/overload.t namespace-autoclean-0.28/t/sub-install.t namespace-autoclean-0.28/t/sub-name.t namespace-autoclean-0.28/lib/namespace/ namespace-autoclean-0.28/lib/namespace/autoclean.pm Configuring E/ET/ETHER/namespace-autoclean-0.28.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Warning: prerequisite Test::Requires 0 not found. Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for namespace::autoclean Writing MYMETA.yml and MYMETA.json ETHER/namespace-autoclean-0.28.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for E/ET/ETHER/namespace-autoclean-0.28.tar.gz ---- Unsatisfied dependencies detected during ---- ---- ETHER/namespace-autoclean-0.28.tar.gz ---- Test::Requires [build_requires] Running test for module 'Test::Requires' Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/T/TO/TOKUHIROM/Test-Requires-0.10.tar.gz ok Test-Requires-0.10/Changes Test-Requires-0.10/LICENSE Test-Requires-0.10/META.json Test-Requires-0.10/Makefile.PL Test-Requires-0.10/README.md Test-Requires-0.10/cpanfile Test-Requires-0.10/lib/Test/Requires.pm Test-Requires-0.10/minil.toml Test-Requires-0.10/t/00_compile.t Test-Requires-0.10/t/01_simple.t Test-Requires-0.10/t/02_no_plan.t Test-Requires-0.10/t/03_import_hashref.t Test-Requires-0.10/t/04_import_array.t Test-Requires-0.10/t/05_success.t Test-Requires-0.10/t/06_perlver.t Test-Requires-0.10/xt/02_perlcritic.t Test-Requires-0.10/xt/perlcriticrc Test-Requires-0.10/META.yml Test-Requires-0.10/MANIFEST Configuring T/TO/TOKUHIROM/Test-Requires-0.10.tar.gz with Makefile.PL >>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL Checking if your kit is complete... Looks good Have /Users/fly2400/cpanfly-5.24/var/megalib Want /Users/fly2400/ap2400-300558/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [darwin-thread-multi-2level] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Test::Requires Writing MYMETA.yml and MYMETA.json TOKUHIROM/Test-Requires-0.10.tar.gz /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK Running make for T/TO/TOKUHIROM/Test-Requires-0.10.tar.gz >>> make cp lib/Test/Requires.pm blib/lib/Test/Requires.pm Manifying 1 pod document TOKUHIROM/Test-Requires-0.10.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Test::More: 1.302141 t/00_compile.t ......... 1..1 ok 1 - use Test::Requires; ok t/01_simple.t .......... 1..10 ok 1 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 2 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 3 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 4 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 5 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 6 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 7 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 8 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 9 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok 10 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found ok t/02_no_plan.t ......... ok 1 # skip Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found 1..1 ok t/03_import_hashref.t .. skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found t/04_import_array.t .... skipped: Test requires module 'Acme::Unknown::Missing::Module::Name' but it's not found t/05_success.t ......... 1..1 ok 1 ok t/06_perlver.t ......... ok 1 - should reach here ok 2 # skip Perl v5.999.0 required (did you mean v5.9.0?)--this is only v5.24.0, stopped at (eval 12) line 2. # BEGIN failed--compilation aborted at (eval 12) line 2. # 1..2 ok All tests successful. Files=7, Tests=15, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.30 cusr 0.05 csys = 0.39 CPU) Result: PASS TOKUHIROM/Test-Requires-0.10.tar.gz make test TEST_VERBOSE=1 -- OK Can't call method "fullname" on an undefined value at /Users/fly2400/cpanfly-5.24/lib/Fly/MakePPD.pm line 168. /Users/fly2400/ap2400-300558/bin/perl-dynamic exits with 255.