PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin
Start 2016-10-22T18:19:51
ActivePerl-2400 CPAN-2.10
Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata'
  Database was generated on Sat, 22 Oct 2016 02:29:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/R/RE/REHSACK/File-ConfigDir-Install-0.001.tar.gz
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/R/RE/REHSACK/File-ConfigDir-Install-0.001.tar.gz ok
File-ConfigDir-Install-0.001/
File-ConfigDir-Install-0.001/Changes
File-ConfigDir-Install-0.001/lib/
File-ConfigDir-Install-0.001/Makefile.PL
File-ConfigDir-Install-0.001/MANIFEST
File-ConfigDir-Install-0.001/MANIFEST.SKIP
File-ConfigDir-Install-0.001/META.json
File-ConfigDir-Install-0.001/META.yml
File-ConfigDir-Install-0.001/README.md
File-ConfigDir-Install-0.001/t/
File-ConfigDir-Install-0.001/t/00-load.t
File-ConfigDir-Install-0.001/t/01-makefile.t
File-ConfigDir-Install-0.001/t/etc/
File-ConfigDir-Install-0.001/t/etc/fsd-install.json
File-ConfigDir-Install-0.001/lib/File/
File-ConfigDir-Install-0.001/lib/File/ConfigDir/
File-ConfigDir-Install-0.001/lib/File/ConfigDir/Install.pm
Configuring R/RE/REHSACK/File-ConfigDir-Install-0.001.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for File::ConfigDir::Install
Writing MYMETA.yml and MYMETA.json
  REHSACK/File-ConfigDir-Install-0.001.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for R/RE/REHSACK/File-ConfigDir-Install-0.001.tar.gz
>>> make
cp lib/File/ConfigDir/Install.pm blib/lib/File/ConfigDir/Install.pm
Manifying 1 pod document
  REHSACK/File-ConfigDir-Install-0.001.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t xt/*.t
# Testing File::ConfigDir::Install 0.001, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t ...... 
1..1
ok 1 - use File::ConfigDir::Install;
ok
WARNING: INST_ETC is not a known parameter.

#   Failed test 'Installed: t/etc/fsd-install.json'
#   at t/01-makefile.t line 76.
# Looks like you failed 1 test of 5.
t/01-makefile.t .. 
'INST_ETC' is not a known MakeMaker parameter name.
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style test-52443-Makefile
Writing test-52443-Makefile for File::ConfigDir::Install
Writing MYMETA.yml and MYMETA.json
ok 1 - Created test-52443-Makefile
ok 2 - Recognized: t/etc/fsd-install.json
# make -f test-52443-Makefile
# cp t/etc/fsd-install.json tlib-52443/etc/fsd-install.json
# cp lib/File/ConfigDir/Install.pm tlib-52443/lib/File/ConfigDir/Install.pm
# Manifying 1 pod document
ok 3 - Copied to blib for dist: t/etc/fsd-install.json
ok 4 - Same content: t/etc/fsd-install.json
# make -f test-52443-Makefile DESTDIR=/tmp/hIindCOwC8 install
# Skip tlib-52443/etc/fsd-install.json (unchanged)
# Manifying 1 pod document
# Installing /tmp/hIindCOwC8/Users/fly2400/ap2400-300558/html/site/lib/File/ConfigDir/Install.html
# Installing /tmp/hIindCOwC8/Users/fly2400/ap2400-300558/site/man/man3/File::ConfigDir::Install.3
# Installing /tmp/hIindCOwC8/Users/fly2400/ap2400-300558/etc/fsd-install.json
# Installing /tmp/hIindCOwC8/Users/fly2400/ap2400-300558/site/lib/File/ConfigDir/Install.pm
# Appending installation info to /tmp/hIindCOwC8/Users/fly2400/ap2400-300558/lib/perllocal.pod
# Checking for /tmp/hIindCOwC8/Users/fly2400/ap2400-300558/site/etc/fsd-install.json
not ok 5 - Installed: t/etc/fsd-install.json
1..5
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/5 subtests 

Test Summary Report
-------------------
t/01-makefile.t (Wstat: 256 Tests: 5 Failed: 1)
  Failed test:  5
  Non-zero exit status: 1
Files=2, Tests=6,  3 wallclock secs ( 0.03 usr  0.01 sys +  1.79 cusr  0.52 csys =  2.35 CPU)
Result: FAIL
Failed 1/2 test programs. 1/6 subtests failed.
make: *** [test_dynamic] Error 1
  REHSACK/File-ConfigDir-Install-0.001.tar.gz
  make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
  reports REHSACK/File-ConfigDir-Install-0.001.tar.gz
Finished 2016-10-22T18:19:57