PATH=/usr/bin:/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin
Start 2016-11-01T22:45:13
ActivePerl-2400 CPAN-2.10
Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata'
  Database was generated on Tue, 01 Nov 2016 05:53:23 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz ok
FreeBSD-Pkgs-FindUpdates-0.3.0/
FreeBSD-Pkgs-FindUpdates-0.3.0/t/
FreeBSD-Pkgs-FindUpdates-0.3.0/lib/
FreeBSD-Pkgs-FindUpdates-0.3.0/MANIFEST
FreeBSD-Pkgs-FindUpdates-0.3.0/bin/
FreeBSD-Pkgs-FindUpdates-0.3.0/Makefile.PL
FreeBSD-Pkgs-FindUpdates-0.3.0/Changes
FreeBSD-Pkgs-FindUpdates-0.3.0/.cvsignore
FreeBSD-Pkgs-FindUpdates-0.3.0/README
FreeBSD-Pkgs-FindUpdates-0.3.0/bin/.exists
FreeBSD-Pkgs-FindUpdates-0.3.0/bin/pkg_findupdates
FreeBSD-Pkgs-FindUpdates-0.3.0/lib/FreeBSD/
FreeBSD-Pkgs-FindUpdates-0.3.0/lib/FreeBSD/Pkgs/
FreeBSD-Pkgs-FindUpdates-0.3.0/lib/FreeBSD/Pkgs/FindUpdates.pm
FreeBSD-Pkgs-FindUpdates-0.3.0/t/boilerplate.t
FreeBSD-Pkgs-FindUpdates-0.3.0/t/pod.t
FreeBSD-Pkgs-FindUpdates-0.3.0/t/pod-coverage.t
FreeBSD-Pkgs-FindUpdates-0.3.0/t/00-load.t
Configuring V/VV/VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Warning: prerequisite FreeBSD::Pkgs 0 not found.
Warning: prerequisite FreeBSD::Ports::INDEXhash 0 not found.
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for FreeBSD::Pkgs::FindUpdates
Writing MYMETA.yml and MYMETA.json
  VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
----   Unsatisfied dependencies detected during   ----
---- VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz ----
    FreeBSD::Ports::INDEXhash [requires]
    FreeBSD::Pkgs [requires]
Running test for module 'FreeBSD::Ports::INDEXhash'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz ok
FreeBSD-Ports-INDEXhash-1.2.2/
FreeBSD-Ports-INDEXhash-1.2.2/t/
FreeBSD-Ports-INDEXhash-1.2.2/lib/
FreeBSD-Ports-INDEXhash-1.2.2/MANIFEST
FreeBSD-Ports-INDEXhash-1.2.2/Makefile.PL
FreeBSD-Ports-INDEXhash-1.2.2/Changes
FreeBSD-Ports-INDEXhash-1.2.2/.cvsignore
FreeBSD-Ports-INDEXhash-1.2.2/README
FreeBSD-Ports-INDEXhash-1.2.2/lib/FreeBSD/
FreeBSD-Ports-INDEXhash-1.2.2/lib/FreeBSD/Ports/
FreeBSD-Ports-INDEXhash-1.2.2/lib/FreeBSD/Ports/INDEXhash.pm
FreeBSD-Ports-INDEXhash-1.2.2/t/boilerplate.t
FreeBSD-Ports-INDEXhash-1.2.2/t/pod.t
FreeBSD-Ports-INDEXhash-1.2.2/t/pod-coverage.t
FreeBSD-Ports-INDEXhash-1.2.2/t/00-load.t
Configuring V/VV/VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for FreeBSD::Ports::INDEXhash
Writing MYMETA.yml and MYMETA.json
  VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz
>>> make
cp lib/FreeBSD/Ports/INDEXhash.pm blib/lib/FreeBSD/Ports/INDEXhash.pm
Manifying 1 pod document
  VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing FreeBSD::Ports::INDEXhash 1.2.2, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t ....... 
1..1
ok 1 - use FreeBSD::Ports::INDEXhash;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/FreeBSD/Ports/INDEXhash.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on FreeBSD::Ports::INDEXhash
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/FreeBSD/Ports/INDEXhash.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  1 wallclock secs ( 0.03 usr  0.01 sys +  0.26 cusr  0.04 csys =  0.34 CPU)
Result: PASS
  VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz
  make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/CHECKSUMS
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="FreeBSD-Ports-INDEXhash" VERSION="1.2.2" DATE="2010-08-28">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Generates a hash out of the FreeBSD Ports index file.</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.24"/>
  <CODEBASE HREF="FreeBSD-Ports-INDEXhash-1.2.2.tar.gz"/>
  <PROVIDE NAME="FreeBSD::Ports::INDEXhash" VERSION="1.002002"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2016-11-01 with ActivePerl-2400 on perl-osx (Mac OS X 10.9.5) log FreeBSD-Pkgs-FindUpdates-0.3.0.d/log-20161101T224513.txt -->
</SOFTPKG>
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_ && tar cvf - FreeBSD-Ports-INDEXhash-1.2.2.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/V/VV/VVELOX/FreeBSD-Ports-INDEXhash-1.2.2.tar.gz
FreeBSD-Ports-INDEXhash-1.2.2.ppd
blib/
blib/lib/
blib/lib/FreeBSD/
blib/lib/FreeBSD/Ports/
blib/lib/FreeBSD/Ports/INDEXhash.pm
blib/man3/
blib/man3/FreeBSD::Ports::INDEXhash.3
Running test for module 'FreeBSD::Pkgs'
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/lib to PERL5LIB for 'get'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz ok
FreeBSD-Pkgs-0.2.0/
FreeBSD-Pkgs-0.2.0/t/
FreeBSD-Pkgs-0.2.0/lib/
FreeBSD-Pkgs-0.2.0/MANIFEST
FreeBSD-Pkgs-0.2.0/Makefile.PL
FreeBSD-Pkgs-0.2.0/Changes
FreeBSD-Pkgs-0.2.0/.cvsignore
FreeBSD-Pkgs-0.2.0/README
FreeBSD-Pkgs-0.2.0/lib/FreeBSD/
FreeBSD-Pkgs-0.2.0/lib/FreeBSD/Pkgs.pm
FreeBSD-Pkgs-0.2.0/t/boilerplate.t
FreeBSD-Pkgs-0.2.0/t/pod.t
FreeBSD-Pkgs-0.2.0/t/00-load.t
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/lib to PERL5LIB for 'prepare'
Configuring V/VV/VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for FreeBSD::Pkgs
Writing MYMETA.yml and MYMETA.json
  VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz
  /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/FreeBSD/Pkgs.pm blib/lib/FreeBSD/Pkgs.pm
Manifying 1 pod document
  VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz
  make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing FreeBSD::Pkgs 0.2.0, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t ...... 
1..1
ok 1 - use FreeBSD::Pkgs;
ok
t/boilerplate.t .. 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/FreeBSD/Pkgs.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod.t .......... 
1..1
ok 1 - POD test for blib/lib/FreeBSD/Pkgs.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=3, Tests=5,  1 wallclock secs ( 0.03 usr  0.01 sys +  0.20 cusr  0.03 csys =  0.27 CPU)
Result: PASS
  VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="FreeBSD-Pkgs" VERSION="0.2.0" DATE="2012-06-01">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Reads the FreeBSD installed packaged DB.</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.24"/>
  <CODEBASE HREF="FreeBSD-Pkgs-0.2.0.tar.gz"/>
  <PROVIDE NAME="FreeBSD::Pkgs" VERSION="0.002000"/>
  <REQUIRE NAME="Error::Helper"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2016-11-01 with ActivePerl-2400 on perl-osx (Mac OS X 10.9.5) log FreeBSD-Pkgs-FindUpdates-0.3.0.d/log-20161101T224513.txt -->
</SOFTPKG>
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-0.2.0-r4u3VX && tar cvf - FreeBSD-Pkgs-0.2.0.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/V/VV/VVELOX/FreeBSD-Pkgs-0.2.0.tar.gz
FreeBSD-Pkgs-0.2.0.ppd
blib/
blib/lib/
blib/lib/FreeBSD/
blib/lib/FreeBSD/Pkgs.pm
blib/man3/
blib/man3/FreeBSD::Pkgs.3
  VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
  Has already been unwrapped into directory /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-FindUpdates-0.3.0-KYb8hI
  VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
  Has already been prepared
Running make for V/VV/VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-0.2.0-r4u3VX/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-0.2.0-r4u3VX/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/FreeBSD/Pkgs/FindUpdates.pm blib/lib/FreeBSD/Pkgs/FindUpdates.pm
Manifying 1 pod document
  VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
  make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-0.2.0-r4u3VX/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-0.2.0-r4u3VX/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Ports-INDEXhash-1.2.2-3va0k_/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing FreeBSD::Pkgs::FindUpdates 0.3.0, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t ....... 
1..1
ok 1 - use FreeBSD::Pkgs::FindUpdates;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/FreeBSD/Pkgs/FindUpdates.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on FreeBSD::Pkgs::FindUpdates
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/FreeBSD/Pkgs/FindUpdates.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.03 usr  0.00 sys +  0.28 cusr  0.05 csys =  0.36 CPU)
Result: PASS
  VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="FreeBSD-Pkgs-FindUpdates" VERSION="0.3.0" DATE="2012-06-01">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Finds updates for FreeBSD pkgs by checking the ports index.</ABSTRACT>
  <ARCHITECTURE NAME="darwin-thread-multi-2level-5.24"/>
  <CODEBASE HREF="FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz"/>
  <PROVIDE NAME="FreeBSD::Pkgs::FindUpdates" VERSION="0.003000"/>
  <REQUIRE NAME="Error::Helper"/>
  <REQUIRE NAME="FreeBSD::Pkgs"/>
  <REQUIRE NAME="FreeBSD::Ports::INDEXhash"/>
  <REQUIRE NAME="Sort::Versions"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2016-11-01 with ActivePerl-2400 on perl-osx (Mac OS X 10.9.5) log FreeBSD-Pkgs-FindUpdates-0.3.0.d/log-20161101T224513.txt -->
</SOFTPKG>
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/FreeBSD-Pkgs-FindUpdates-0.3.0-KYb8hI && tar cvf - FreeBSD-Pkgs-FindUpdates-0.3.0.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/V/VV/VVELOX/FreeBSD-Pkgs-FindUpdates-0.3.0.tar.gz
FreeBSD-Pkgs-FindUpdates-0.3.0.ppd
blib/
blib/lib/
blib/lib/FreeBSD/
blib/lib/FreeBSD/Pkgs/
blib/lib/FreeBSD/Pkgs/FindUpdates.pm
blib/man3/
blib/man3/FreeBSD::Pkgs::FindUpdates.3
Finished 2016-11-01T22:45:20