PATH=/Users/fly2400/cpanfly-5.24/bin:/Users/fly2400/ap2400-300558/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/opt/X11/bin:/Users/fly2400/cpanfly-5.24/var/megalib/bin
Start 2017-01-05T12:31:40
ActivePerl-2400 CPAN-2.10
Reading '/Users/fly2400/cpanfly-5.24/var/cpan/Metadata'
Database was generated on Thu, 05 Jan 2017 06:29:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/Plugtools-1.3.0.tar.gz
Can't chown '/Users/fly2400/cpanfly-5.24/var/cpan/FTPstats.yml.58912' to fly2200/cpanflies: Operation not permitted
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/Plugtools-1.3.0.tar.gz ok
Plugtools-1.3.0/
Plugtools-1.3.0/t/
Plugtools-1.3.0/lib/
Plugtools-1.3.0/bin/
Plugtools-1.3.0/MANIFEST
Plugtools-1.3.0/Makefile.PL
Plugtools-1.3.0/Changes
Plugtools-1.3.0/.cvsignore
Plugtools-1.3.0/README
Plugtools-1.3.0/bin/plurm
Plugtools-1.3.0/bin/plumod
Plugtools-1.3.0/bin/plgrm
Plugtools-1.3.0/bin/plgmod
Plugtools-1.3.0/bin/plgclean
Plugtools-1.3.0/bin/plupass
Plugtools-1.3.0/bin/pluadd
Plugtools-1.3.0/bin/plgadd
Plugtools-1.3.0/lib/Plugtools/
Plugtools-1.3.0/lib/Plugtools.pm
Plugtools-1.3.0/lib/Plugtools/Plugins/
Plugtools-1.3.0/lib/Plugtools/Plugins/Dump.pm
Plugtools-1.3.0/t/01-load.t
Plugtools-1.3.0/t/boilerplate.t
Plugtools-1.3.0/t/pod.t
Plugtools-1.3.0/t/pod-coverage.t
Plugtools-1.3.0/t/00-load.t
Configuring V/VV/VVELOX/Plugtools-1.3.0.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Warning: prerequisite Config::IniHash 0 not found.
Warning: prerequisite Net::LDAP::posixAccount 0 not found.
Warning: prerequisite Sys::Group::GIDhelper 0 not found.
Warning: prerequisite Sys::User::UIDhelper 0 not found.
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Plugtools
Writing MYMETA.yml and MYMETA.json
VVELOX/Plugtools-1.3.0.tar.gz
/Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/Plugtools-1.3.0.tar.gz
---- Unsatisfied dependencies detected during ----
---- VVELOX/Plugtools-1.3.0.tar.gz ----
Sys::User::UIDhelper [requires]
Sys::Group::GIDhelper [requires]
Net::LDAP::posixAccount [requires]
Config::IniHash [requires]
Running test for module 'Sys::User::UIDhelper'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz ok
Sys-User-UIDhelper-0.0.1/
Sys-User-UIDhelper-0.0.1/t/
Sys-User-UIDhelper-0.0.1/lib/
Sys-User-UIDhelper-0.0.1/Changes
Sys-User-UIDhelper-0.0.1/.cvsignore
Sys-User-UIDhelper-0.0.1/README
Sys-User-UIDhelper-0.0.1/MANIFEST
Sys-User-UIDhelper-0.0.1/Makefile.PL
Sys-User-UIDhelper-0.0.1/lib/Sys/
Sys-User-UIDhelper-0.0.1/lib/Sys/User/
Sys-User-UIDhelper-0.0.1/lib/Sys/User/UIDhelper.pm
Sys-User-UIDhelper-0.0.1/t/boilerplate.t
Sys-User-UIDhelper-0.0.1/t/pod.t
Sys-User-UIDhelper-0.0.1/t/pod-coverage.t
Sys-User-UIDhelper-0.0.1/t/00-load.t
Configuring V/VV/VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Sys::User::UIDhelper
Writing MYMETA.yml and MYMETA.json
VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz
/Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz
>>> make
cp lib/Sys/User/UIDhelper.pm blib/lib/Sys/User/UIDhelper.pm
Manifying 1 pod document
VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Sys::User::UIDhelper 0.0.1, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t .......
1..1
ok 1 - use Sys::User::UIDhelper;
ok
t/boilerplate.t ...
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Sys/User/UIDhelper.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t ..
1..1
ok 1 - Pod coverage on Sys::User::UIDhelper
ok
t/pod.t ...........
1..1
ok 1 - POD test for blib/lib/Sys/User/UIDhelper.pm
ok
All tests successful.
Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
TODO passed: 1-3
Files=4, Tests=6, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.20 cusr 0.03 csys = 0.26 CPU)
Result: PASS
VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz
make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
Zane C. Bowers-Hadley <vvelox@vvelox.net>
Helps for locating free UIDs.
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo && tar cvf - Sys-User-UIDhelper-0.0.1.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/V/VV/VVELOX/Sys-User-UIDhelper-0.0.1.tar.gz
Sys-User-UIDhelper-0.0.1.ppd
blib/
blib/lib/
blib/lib/Sys/
blib/lib/Sys/User/
blib/lib/Sys/User/UIDhelper.pm
blib/man3/
blib/man3/Sys::User::UIDhelper.3
Running test for module 'Sys::Group::GIDhelper'
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'get'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz
Can't chown '/Users/fly2400/cpanfly-5.24/var/cpan/FTPstats.yml.58912' to fly2200/cpanflies: Operation not permitted
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz ok
Sys-Group-GIDhelper-0.0.2/
Sys-Group-GIDhelper-0.0.2/t/
Sys-Group-GIDhelper-0.0.2/lib/
Sys-Group-GIDhelper-0.0.2/Changes
Sys-Group-GIDhelper-0.0.2/.cvsignore
Sys-Group-GIDhelper-0.0.2/README
Sys-Group-GIDhelper-0.0.2/MANIFEST
Sys-Group-GIDhelper-0.0.2/Makefile.PL
Sys-Group-GIDhelper-0.0.2/lib/Sys/
Sys-Group-GIDhelper-0.0.2/lib/Sys/Group/
Sys-Group-GIDhelper-0.0.2/lib/Sys/Group/GIDhelper.pm
Sys-Group-GIDhelper-0.0.2/t/boilerplate.t
Sys-Group-GIDhelper-0.0.2/t/pod.t
Sys-Group-GIDhelper-0.0.2/t/00-load.t
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'prepare'
Configuring V/VV/VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Warning: the following files are missing in your kit:
t/pod-coverage.t
Please inform the author.
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Sys::Group::GIDhelper
Writing MYMETA.yml and MYMETA.json
VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz
/Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Sys/Group/GIDhelper.pm blib/lib/Sys/Group/GIDhelper.pm
Manifying 1 pod document
VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz
make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Sys::Group::GIDhelper 0.0.2, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t ......
1..1
ok 1 - use Sys::Group::GIDhelper;
ok
t/boilerplate.t ..
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Sys/Group/GIDhelper.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod.t ..........
1..1
ok 1 - POD test for blib/lib/Sys/Group/GIDhelper.pm
ok
All tests successful.
Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
TODO passed: 1-3
Files=3, Tests=5, 1 wallclock secs ( 0.01 usr 0.01 sys + 0.13 cusr 0.02 csys = 0.17 CPU)
Result: PASS
VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz
make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
Zane C. Bowers-Hadley <vvelox@vvelox.net>
Helps for locating free GIDs.
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz && tar cvf - Sys-Group-GIDhelper-0.0.2.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/V/VV/VVELOX/Sys-Group-GIDhelper-0.0.2.tar.gz
Sys-Group-GIDhelper-0.0.2.ppd
blib/
blib/lib/
blib/lib/Sys/
blib/lib/Sys/Group/
blib/lib/Sys/Group/GIDhelper.pm
blib/man3/
blib/man3/Sys::Group::GIDhelper.3
Running test for module 'Net::LDAP::posixAccount'
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'get'
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/V/VV/VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz
Can't chown '/Users/fly2400/cpanfly-5.24/var/cpan/FTPstats.yml.58912' to fly2200/cpanflies: Operation not permitted
Checksum for /Users/fly2400/cpanfly-5.24/var/cpan/sources/authors/id/V/VV/VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz ok
Net-LDAP-posixAccount-0.0.2/
Net-LDAP-posixAccount-0.0.2/t/
Net-LDAP-posixAccount-0.0.2/lib/
Net-LDAP-posixAccount-0.0.2/Changes
Net-LDAP-posixAccount-0.0.2/.cvsignore
Net-LDAP-posixAccount-0.0.2/README
Net-LDAP-posixAccount-0.0.2/MANIFEST
Net-LDAP-posixAccount-0.0.2/Makefile.PL
Net-LDAP-posixAccount-0.0.2/lib/Net/
Net-LDAP-posixAccount-0.0.2/lib/Net/LDAP/
Net-LDAP-posixAccount-0.0.2/lib/Net/LDAP/posixAccount.pm
Net-LDAP-posixAccount-0.0.2/t/boilerplate.t
Net-LDAP-posixAccount-0.0.2/t/pod.t
Net-LDAP-posixAccount-0.0.2/t/pod-coverage.t
Net-LDAP-posixAccount-0.0.2/t/00-load.t
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'prepare'
Configuring V/VV/VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz with Makefile.PL
>>> /Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL
Checking if your kit is complete...
Looks good
Have /Users/fly2400/cpanfly-5.24/var/megalib
Want /Users/fly2400/ap2400-300558/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [darwin-thread-multi-2level]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Net::LDAP::posixAccount
Writing MYMETA.yml and MYMETA.json
VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz
/Users/fly2400/ap2400-300558/bin/perl-dynamic Makefile.PL -- OK
Running make for V/VV/VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Net/LDAP/posixAccount.pm blib/lib/Net/LDAP/posixAccount.pm
Manifying 1 pod document
VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz
make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Net::LDAP::posixAccount 0.0.2, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/00-load.t .......
1..1
ok 1 - use Net::LDAP::posixAccount;
ok
t/boilerplate.t ...
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
not ok 3 - lib/Net/LDAP/posixAccount.pm contains boilerplate text # TODO Need to replace the boilerplate text
# Failed (TODO) test 'lib/Net/LDAP/posixAccount.pm contains boilerplate text'
# at t/boilerplate.t line 23.
# boilerplate description appears on lines 24
ok
t/pod-coverage.t ..
1..1
ok 1 - Pod coverage on Net::LDAP::posixAccount
ok
t/pod.t ...........
1..1
ok 1 - POD test for blib/lib/Net/LDAP/posixAccount.pm
ok
All tests successful.
Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
TODO passed: 1-2
Files=4, Tests=6, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.27 cusr 0.04 csys = 0.34 CPU)
Result: PASS
VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz
make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
Zane C. Bowers-Hadley <vvelox@vvelox.net>
Creates new Net::LDAP::Entry objects for a posixAccount entry.
>>> (cd /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0 && tar cvf - Net-LDAP-posixAccount-0.0.2.ppd blib) | gzip -c >/Users/fly2400/cpanfly-5.24/var/REPO/V/VV/VVELOX/Net-LDAP-posixAccount-0.0.2.tar.gz
Net-LDAP-posixAccount-0.0.2.ppd
blib/
blib/lib/
blib/lib/Net/
blib/lib/Net/LDAP/
blib/lib/Net/LDAP/posixAccount.pm
blib/man3/
blib/man3/Net::LDAP::posixAccount.3
Running test for module 'Config::IniHash'
The module Config::IniHash isn't available on CPAN.
Either the module has not yet been uploaded to CPAN, or it is
temporary unavailable. Please contact the author to find out
more about the status. Try 'i Config::IniHash'.
VVELOX/Plugtools-1.3.0.tar.gz
Has already been unwrapped into directory /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Plugtools-1.3.0-PuFvk9
VVELOX/Plugtools-1.3.0.tar.gz
Has already been prepared
Running make for V/VV/VVELOX/Plugtools-1.3.0.tar.gz
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Plugtools/Plugins/Dump.pm blib/lib/Plugtools/Plugins/Dump.pm
cp lib/Plugtools.pm blib/lib/Plugtools.pm
Manifying 2 pod documents
VVELOX/Plugtools-1.3.0.tar.gz
make -- OK
Prepending /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/Users/fly2400/ap2400-300558/bin/perl-dynamic" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Plugtools;'
# at t/00-load.t line 6.
# Tried to use 'Plugtools'.
# Error: Can't locate Config/IniHash.pm in @INC (you may need to install the Config::IniHash module) (@INC contains: /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Plugtools-1.3.0-PuFvk9/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Plugtools-1.3.0-PuFvk9/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib /Users/fly2400/cpanfly-5.24/var/megalib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Net-LDAP-posixAccount-0.0.2-uugqU0/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-Group-GIDhelper-0.0.2-743uMz/blib/lib /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/arch /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Sys-User-UIDhelper-0.0.1-d8WTKo/blib/lib /Users/fly2400/cpanfly-5.24/var/megalib /Users/fly2400/Library/ActivePerl-5.24/lib /Users/fly2400/ap2400-300558/site/lib /Users/fly2400/ap2400-300558/lib) at /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Plugtools-1.3.0-PuFvk9/blib/lib/Plugtools.pm line 5.
# BEGIN failed--compilation aborted at /Users/fly2400/cpanfly-5.24/var/tmp/cpan_build/Plugtools-1.3.0-PuFvk9/blib/lib/Plugtools.pm line 5.
# Compilation failed in require at t/00-load.t line 6.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Testing Plugtools , Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
# Looks like you failed 1 test of 1.
t/00-load.t .......
1..1
not ok 1 - use Plugtools;
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Testing Plugtools::Plugins::Dump 0.0.0, Perl 5.024000, /Users/fly2400/ap2400-300558/bin/perl-dynamic
t/01-load.t .......
1..1
ok 1 - use Plugtools::Plugins::Dump;
ok
t/boilerplate.t ...
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Plugtools.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
# Failed test 'Pod coverage on Plugtools'
# at /Users/fly2400/cpanfly-5.24/var/megalib/Test/Pod/Coverage.pm line 133.
# Plugtools: requiring 'Plugtools' failed
# Looks like you failed 1 test of 2.
t/pod-coverage.t ..
1..2
not ok 1 - Pod coverage on Plugtools
ok 2 - Pod coverage on Plugtools::Plugins::Dump
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/2 subtests
t/pod.t ...........
1..2
ok 1 - POD test for blib/lib/Plugtools.pm
ok 2 - POD test for blib/lib/Plugtools/Plugins/Dump.pm
ok
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
TODO passed: 1-3
t/pod-coverage.t (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=5, Tests=9, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.31 cusr 0.05 csys = 0.38 CPU)
Result: FAIL
Failed 2/5 test programs. 2/9 subtests failed.
make: *** [test_dynamic] Error 255
VVELOX/Plugtools-1.3.0.tar.gz
one dependency not OK (Config::IniHash); additionally test harness failed
make test TEST_VERBOSE=1 -- NOT OK
//hint// to see the cpan-testers results for installing this module, try:
reports VVELOX/Plugtools-1.3.0.tar.gz
Finished 2017-01-05T12:31:55