Start 2008-11-15T12:16:54 Going to read /Users/fly818/var/cpan/Metadata Database was generated on Sat, 15 Nov 2008 09:27:59 GMT Running make for L/LB/LBROCARD/Git-PurePerl-0.32.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/L/LB/LBROCARD/Git-PurePerl-0.32.tar.gz Fetching with LWP: http://cpan.nas.activestate.com/authors/id/L/LB/LBROCARD/CHECKSUMS Checksum for /Users/fly818/var/cpan/sources/authors/id/L/LB/LBROCARD/Git-PurePerl-0.32.tar.gz ok Git-PurePerl-0.32/ Git-PurePerl-0.32/CHANGES Git-PurePerl-0.32/META.yml Git-PurePerl-0.32/test-project-packs.tgz Git-PurePerl-0.32/t/ Git-PurePerl-0.32/t/00_setup.t Git-PurePerl-0.32/t/simple.t Git-PurePerl-0.32/Makefile.PL Git-PurePerl-0.32/test-project.tgz Git-PurePerl-0.32/README Git-PurePerl-0.32/lib/ Git-PurePerl-0.32/lib/Git/ Git-PurePerl-0.32/lib/Git/PurePerl.pm Git-PurePerl-0.32/lib/Git/PurePerl/ Git-PurePerl-0.32/lib/Git/PurePerl/Object.pm Git-PurePerl-0.32/lib/Git/PurePerl/Pack.pm Git-PurePerl-0.32/lib/Git/PurePerl/Object/ Git-PurePerl-0.32/lib/Git/PurePerl/Object/Commit.pm Git-PurePerl-0.32/lib/Git/PurePerl/Object/Blob.pm Git-PurePerl-0.32/lib/Git/PurePerl/Object/Tree.pm Git-PurePerl-0.32/lib/Git/PurePerl/DirectoryEntry.pm Git-PurePerl-0.32/MANIFEST CPAN.pm: Going to build L/LB/LBROCARD/Git-PurePerl-0.32.tar.gz >>> /Users/fly818/bin/perl Makefile.PL Warning: prerequisite Archive::Extract 0 not found. Checking if your kit is complete... Looks good Writing Makefile for Git::PurePerl ---- Unsatisfied dependencies detected during ---- ---- LBROCARD/Git-PurePerl-0.32.tar.gz ---- Archive::Extract [requires] Running make test Delayed until after prerequisites Running test for module 'Archive::Extract' Running make for K/KA/KANE/Archive-Extract-0.28.tar.gz Checksum for /Users/fly818/var/cpan/sources/authors/id/K/KA/KANE/Archive-Extract-0.28.tar.gz ok Archive-Extract-0.28/ Archive-Extract-0.28/CHANGES Archive-Extract-0.28/lib/ Archive-Extract-0.28/lib/Archive/ Archive-Extract-0.28/lib/Archive/Extract.pm Archive-Extract-0.28/Makefile.PL Archive-Extract-0.28/MANIFEST Archive-Extract-0.28/META.yml Archive-Extract-0.28/README Archive-Extract-0.28/t/ Archive-Extract-0.28/t/01_Archive-Extract.t Archive-Extract-0.28/t/src/ Archive-Extract-0.28/t/src/double_dir.zip Archive-Extract-0.28/t/src/x.bz2 Archive-Extract-0.28/t/src/x.gz Archive-Extract-0.28/t/src/x.jar Archive-Extract-0.28/t/src/x.lzma Archive-Extract-0.28/t/src/x.par Archive-Extract-0.28/t/src/x.tar Archive-Extract-0.28/t/src/x.tar.gz Archive-Extract-0.28/t/src/x.tgz Archive-Extract-0.28/t/src/x.Z Archive-Extract-0.28/t/src/x.zip Archive-Extract-0.28/t/src/y.jar Archive-Extract-0.28/t/src/y.par Archive-Extract-0.28/t/src/y.tar Archive-Extract-0.28/t/src/y.tar.bz2 Archive-Extract-0.28/t/src/y.tar.gz Archive-Extract-0.28/t/src/y.tbz Archive-Extract-0.28/t/src/y.tgz Archive-Extract-0.28/t/src/y.zip CPAN.pm: Going to build K/KA/KANE/Archive-Extract-0.28.tar.gz >>> /Users/fly818/bin/perl Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Archive::Extract >>> make cp lib/Archive/Extract.pm blib/lib/Archive/Extract.pm Manifying blib/man3/Archive::Extract.3 KANE/Archive-Extract-0.28.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly818/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_Archive-Extract.... ok 1 - use Archive::Extract; ok 2 - Archive::Extract->can('types') ok 3 - Got a list of types ok 4 - Object created based on 'tgz' ok 5 - No error logged ok 6 - Object created based on 'tar' ok 7 - No error logged ok 8 - Object created based on 'gz' ok 9 - No error logged ok 10 - Object created based on 'zip' ok 11 - No error logged ok 12 - Object created based on 'bz2' ok 13 - No error logged ok 14 - Object created based on 'tbz' ok 15 - No error logged ok 16 - Object created based on 'Z' ok 17 - No error logged ok 18 - Object created based on 'lzma' ok 19 - No error logged ok 20 - No archive created based on '01_Archive-Extract.t' ok 21 - Error not captured in class method ok 22 - Error captured as warning ok 23 - Error is: unknown file type ok 24 - Archive created ok 25 - No errors yet ok 26 - Errors retrieved ok 27 - As expected ok 28 - Errors erased after ->extract() call ok 29 - Found extraction dir '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/src' ok 30 - Is expected dir '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/src' ok 31 - Found extraction dir '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/src' ok 32 - Is expected dir '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/src' ok 33 - The object isa Archive::Extract ok 34 - Archive type recognized properly ok 35 - extract() for 'y.tar.gz' reports success (PP: 0 Bin: 1) ok 36 - No errors capturing buffers ok 37 - Found correct number of output files ok 38 - Found correct output file 'y/z' ok 39 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 40 - Extract dir found ok 41 - Extract dir exists ok 42 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 43 - Output file successfully removed ok 44 - rmtree gave no error ok 45 - Extract dir succesfully removed ok 46 # SKIP No buffers available ok 47 # SKIP No buffers available ok 48 # SKIP No buffers available ok 49 # SKIP No buffers available ok 50 # SKIP No buffers available ok 51 # SKIP No buffers available ok 52 # SKIP No buffers available ok 53 # SKIP No buffers available ok 54 - Output file successfully removed ok 55 # SKIP No extract path captured, can't remove paths ok 56 # SKIP No extract path captured, can't remove paths ok 57 - The object isa Archive::Extract ok 58 - Archive type recognized properly ok 59 - extract() for 'double_dir.zip' reports success (PP: 0 Bin: 1) ok 60 - No errors capturing buffers ok 61 - Found correct number of output files ok 62 - Found correct output file 'x/w' ok 63 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/x/w' exists ok 64 - Extract dir found ok 65 - Extract dir exists ok 66 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/x' ok 67 - Output file successfully removed ok 68 - rmtree gave no error ok 69 - Extract dir succesfully removed ok 70 # SKIP No buffers available ok 71 # SKIP No buffers available ok 72 # SKIP No buffers available ok 73 # SKIP No buffers available ok 74 # SKIP No buffers available ok 75 # SKIP No buffers available ok 76 # SKIP No buffers available ok 77 # SKIP No buffers available ok 78 - Output file successfully removed ok 79 - rmtree gave no error ok 80 - Extract dir succesfully removed ok 81 - The object isa Archive::Extract ok 82 - Archive type recognized properly ok 83 - extract() for 'y.jar' reports success (PP: 0 Bin: 1) ok 84 - No errors capturing buffers ok 85 - Found correct number of output files ok 86 - Found correct output file 'y/z' ok 87 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 88 - Extract dir found ok 89 - Extract dir exists ok 90 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 91 - Output file successfully removed ok 92 - rmtree gave no error ok 93 - Extract dir succesfully removed ok 94 # SKIP No buffers available ok 95 # SKIP No buffers available ok 96 # SKIP No buffers available ok 97 # SKIP No buffers available ok 98 # SKIP No buffers available ok 99 # SKIP No buffers available ok 100 # SKIP No buffers available ok 101 # SKIP No buffers available ok 102 - Output file successfully removed ok 103 - rmtree gave no error ok 104 - Extract dir succesfully removed ok 105 - The object isa Archive::Extract ok 106 - Archive type recognized properly ok 107 - extract() for 'x.bz2' reports success (PP: 0 Bin: 1) ok 108 - No errors capturing buffers ok 109 - Found correct number of output files ok 110 - Found correct output file 'a' ok 111 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 112 - Extract dir found ok 113 - Extract dir exists ok 114 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 115 - Output file successfully removed ok 116 - rmtree gave no error ok 117 - Extract dir succesfully removed ok 118 # SKIP No buffers available ok 119 # SKIP No buffers available ok 120 # SKIP No buffers available ok 121 # SKIP No buffers available ok 122 # SKIP No buffers available ok 123 # SKIP No buffers available ok 124 # SKIP No buffers available ok 125 # SKIP No buffers available ok 126 - Output file successfully removed ok 127 - rmtree gave no error ok 128 - Extract dir succesfully removed ok 129 - The object isa Archive::Extract ok 130 - Archive type recognized properly ok 131 - extract() for 'y.tgz' reports success (PP: 0 Bin: 1) ok 132 - No errors capturing buffers ok 133 - Found correct number of output files ok 134 - Found correct output file 'y/z' ok 135 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 136 - Extract dir found ok 137 - Extract dir exists ok 138 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 139 - Output file successfully removed ok 140 - rmtree gave no error ok 141 - Extract dir succesfully removed ok 142 # SKIP No buffers available ok 143 # SKIP No buffers available ok 144 # SKIP No buffers available ok 145 # SKIP No buffers available ok 146 # SKIP No buffers available ok 147 # SKIP No buffers available ok 148 # SKIP No buffers available ok 149 # SKIP No buffers available ok 150 - Output file successfully removed ok 151 # SKIP No extract path captured, can't remove paths ok 152 # SKIP No extract path captured, can't remove paths ok 153 - The object isa Archive::Extract ok 154 - Archive type recognized properly ok 155 - extract() for 'y.zip' reports success (PP: 0 Bin: 1) ok 156 - No errors capturing buffers ok 157 - Found correct number of output files ok 158 - Found correct output file 'y/z' ok 159 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 160 - Extract dir found ok 161 - Extract dir exists ok 162 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 163 - Output file successfully removed ok 164 - rmtree gave no error ok 165 - Extract dir succesfully removed ok 166 # SKIP No buffers available ok 167 # SKIP No buffers available ok 168 # SKIP No buffers available ok 169 # SKIP No buffers available ok 170 # SKIP No buffers available ok 171 # SKIP No buffers available ok 172 # SKIP No buffers available ok 173 # SKIP No buffers available ok 174 - Output file successfully removed ok 175 - rmtree gave no error ok 176 - Extract dir succesfully removed ok 177 - The object isa Archive::Extract ok 178 - Archive type recognized properly ok 179 - extract() for 'x.tar.gz' reports success (PP: 0 Bin: 1) ok 180 - No errors capturing buffers ok 181 - Found correct number of output files ok 182 - Found correct output file 'a' ok 183 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 184 - Extract dir found ok 185 - Extract dir exists ok 186 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 187 - Output file successfully removed ok 188 - rmtree gave no error ok 189 - Extract dir succesfully removed ok 190 # SKIP No buffers available ok 191 # SKIP No buffers available ok 192 # SKIP No buffers available ok 193 # SKIP No buffers available ok 194 # SKIP No buffers available ok 195 # SKIP No buffers available ok 196 # SKIP No buffers available ok 197 # SKIP No buffers available ok 198 - Output file successfully removed ok 199 # SKIP No extract path captured, can't remove paths ok 200 # SKIP No extract path captured, can't remove paths ok 201 - The object isa Archive::Extract ok 202 - Archive type recognized properly ok 203 - extract() for 'y.tar' reports success (PP: 0 Bin: 1) ok 204 - No errors capturing buffers ok 205 - Found correct number of output files ok 206 - Found correct output file 'y/z' ok 207 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 208 - Extract dir found ok 209 - Extract dir exists ok 210 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 211 - Output file successfully removed ok 212 - rmtree gave no error ok 213 - Extract dir succesfully removed ok 214 # SKIP No buffers available ok 215 # SKIP No buffers available ok 216 # SKIP No buffers available ok 217 # SKIP No buffers available ok 218 # SKIP No buffers available ok 219 # SKIP No buffers available ok 220 # SKIP No buffers available ok 221 # SKIP No buffers available ok 222 - Output file successfully removed ok 223 # SKIP No extract path captured, can't remove paths ok 224 # SKIP No extract path captured, can't remove paths ok 225 - The object isa Archive::Extract ok 226 - Archive type recognized properly ok 227 - extract() for 'x.tgz' reports success (PP: 0 Bin: 1) ok 228 - No errors capturing buffers ok 229 - Found correct number of output files ok 230 - Found correct output file 'a' ok 231 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 232 - Extract dir found ok 233 - Extract dir exists ok 234 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 235 - Output file successfully removed ok 236 - rmtree gave no error ok 237 - Extract dir succesfully removed ok 238 # SKIP No buffers available ok 239 # SKIP No buffers available ok 240 # SKIP No buffers available ok 241 # SKIP No buffers available ok 242 # SKIP No buffers available ok 243 # SKIP No buffers available ok 244 # SKIP No buffers available ok 245 # SKIP No buffers available ok 246 - Output file successfully removed ok 247 # SKIP No extract path captured, can't remove paths ok 248 # SKIP No extract path captured, can't remove paths ok 249 - The object isa Archive::Extract ok 250 - Archive type recognized properly ok 251 - extract() for 'y.par' reports success (PP: 0 Bin: 1) ok 252 - No errors capturing buffers ok 253 - Found correct number of output files ok 254 - Found correct output file 'y/z' ok 255 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 256 - Extract dir found ok 257 - Extract dir exists ok 258 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 259 - Output file successfully removed ok 260 - rmtree gave no error ok 261 - Extract dir succesfully removed ok 262 # SKIP No buffers available ok 263 # SKIP No buffers available ok 264 # SKIP No buffers available ok 265 # SKIP No buffers available ok 266 # SKIP No buffers available ok 267 # SKIP No buffers available ok 268 # SKIP No buffers available ok 269 # SKIP No buffers available ok 270 - Output file successfully removed ok 271 - rmtree gave no error ok 272 - Extract dir succesfully removed ok 273 - The object isa Archive::Extract ok 274 - Archive type recognized properly ok 275 - extract() for 'y.tbz' reports success (PP: 0 Bin: 1) ok 276 - No errors capturing buffers ok 277 - Found correct number of output files ok 278 - Found correct output file 'y/z' ok 279 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 280 - Extract dir found ok 281 - Extract dir exists ok 282 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 283 - Output file successfully removed ok 284 - rmtree gave no error ok 285 - Extract dir succesfully removed ok 286 # SKIP No buffers available ok 287 # SKIP No buffers available ok 288 # SKIP No buffers available ok 289 # SKIP No buffers available ok 290 # SKIP No buffers available ok 291 # SKIP No buffers available ok 292 # SKIP No buffers available ok 293 # SKIP No buffers available ok 294 - Output file successfully removed ok 295 # SKIP No extract path captured, can't remove paths ok 296 # SKIP No extract path captured, can't remove paths ok 297 - The object isa Archive::Extract ok 298 - Archive type recognized properly not ok 299 - extract() for 'x.Z' reports success (PP: 0 Bin: 1) # Failed test 'extract() for 'x.Z' reports success (PP: 0 Bin: 1)' # at t/01_Archive-Extract.t line 396. ok 300 - No errors capturing buffers not ok 301 - Found correct number of output files # Failed test 'Found correct number of output files' # at t/01_Archive-Extract.t line 409. # got: '0' # expected: '1' not ok 302 - Found correct output file 'a' # Failed test 'Found correct output file 'a'' # at t/01_Archive-Extract.t line 416. # got: undef # expected: 'a' ok 303 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists not ok 304 - Extract dir found # Failed test 'Extract dir found' # at t/01_Archive-Extract.t line 421. Use of uninitialized value in -d at t/01_Archive-Extract.t line 423. not ok 305 - Extract dir exists # Failed test 'Extract dir exists' # at t/01_Archive-Extract.t line 423. not ok 306 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' # Failed test 'Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out'' # at t/01_Archive-Extract.t line 425. # got: undef # expected: '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 307 - Output file successfully removed ok 308 # SKIP No extract path captured, can't remove paths ok 309 # SKIP No extract path captured, can't remove paths Use of uninitialized value in join or string at (eval 111) line 2. not ok 310 - extract() for 'x.Z' reports success (PP: 0 Bin: 1) # Failed test 'extract() for 'x.Z' reports success (PP: 0 Bin: 1)' # at t/01_Archive-Extract.t line 396. ok 311 - No errors capturing buffers not ok 312 - Found correct number of output files # Failed test 'Found correct number of output files' # at t/01_Archive-Extract.t line 409. # got: '0' # expected: '1' not ok 313 - Found correct output file 'a' # Failed test 'Found correct output file 'a'' # at t/01_Archive-Extract.t line 416. # got: undef # expected: 'a' ok 314 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists not ok 315 - Extract dir found # Failed test 'Extract dir found' # at t/01_Archive-Extract.t line 421. Use of uninitialized value in -d at t/01_Archive-Extract.t line 423. not ok 316 - Extract dir exists # Failed test 'Extract dir exists' # at t/01_Archive-Extract.t line 423. not ok 317 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' # Failed test 'Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out'' # at t/01_Archive-Extract.t line 425. # got: undef # expected: '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 318 - Output file successfully removed ok 319 # SKIP No extract path captured, can't remove paths ok 320 # SKIP No extract path captured, can't remove paths ok 321 - The object isa Archive::Extract ok 322 - Archive type recognized properly ok 323 - extract() for 'x.tar' reports success (PP: 0 Bin: 1) ok 324 - No errors capturing buffers ok 325 - Found correct number of output files ok 326 - Found correct output file 'a' ok 327 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 328 - Extract dir found ok 329 - Extract dir exists ok 330 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 331 - Output file successfully removed ok 332 - rmtree gave no error ok 333 - Extract dir succesfully removed ok 334 # SKIP No buffers available ok 335 # SKIP No buffers available ok 336 # SKIP No buffers available ok 337 # SKIP No buffers available ok 338 # SKIP No buffers available ok 339 # SKIP No buffers available ok 340 # SKIP No buffers available ok 341 # SKIP No buffers available ok 342 - Output file successfully removed ok 343 # SKIP No extract path captured, can't remove paths ok 344 # SKIP No extract path captured, can't remove paths ok 345 - The object isa Archive::Extract ok 346 - Archive type recognized properly ok 347 - extract() for 'x.gz' reports success (PP: 0 Bin: 1) ok 348 - No errors capturing buffers ok 349 - Found correct number of output files ok 350 - Found correct output file 'a' ok 351 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 352 - Extract dir found ok 353 - Extract dir exists ok 354 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 355 - Output file successfully removed ok 356 - rmtree gave no error ok 357 - Extract dir succesfully removed ok 358 # SKIP No buffers available ok 359 # SKIP No buffers available ok 360 # SKIP No buffers available ok 361 # SKIP No buffers available ok 362 # SKIP No buffers available ok 363 # SKIP No buffers available ok 364 # SKIP No buffers available ok 365 # SKIP No buffers available ok 366 - Output file successfully removed ok 367 - rmtree gave no error ok 368 - Extract dir succesfully removed ok 369 - The object isa Archive::Extract ok 370 - Archive type recognized properly ok 371 - extract() for 'x.jar' reports success (PP: 0 Bin: 1) ok 372 - No errors capturing buffers ok 373 - Found correct number of output files ok 374 - Found correct output file 'a' ok 375 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 376 - Extract dir found ok 377 - Extract dir exists ok 378 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 379 - Output file successfully removed ok 380 - rmtree gave no error ok 381 - Extract dir succesfully removed ok 382 # SKIP No buffers available ok 383 # SKIP No buffers available ok 384 # SKIP No buffers available ok 385 # SKIP No buffers available ok 386 # SKIP No buffers available ok 387 # SKIP No buffers available ok 388 # SKIP No buffers available ok 389 # SKIP No buffers available ok 390 - Output file successfully removed ok 391 - rmtree gave no error ok 392 - Extract dir succesfully removed ok 393 - The object isa Archive::Extract ok 394 - Archive type recognized properly ok 395 # SKIP No extractor available ok 396 # SKIP No extractor available ok 397 # SKIP No extractor available ok 398 # SKIP No extractor available ok 399 # SKIP No extractor available ok 400 # SKIP No extractor available ok 401 # SKIP No extractor available ok 402 # SKIP No extractor available ok 403 - Output file successfully removed ok 404 # SKIP No extract path captured, can't remove paths ok 405 # SKIP No extract path captured, can't remove paths ok 406 # SKIP No extractor available ok 407 # SKIP No extractor available ok 408 # SKIP No extractor available ok 409 # SKIP No extractor available ok 410 # SKIP No extractor available ok 411 # SKIP No extractor available ok 412 # SKIP No extractor available ok 413 # SKIP No extractor available ok 414 - Output file successfully removed ok 415 # SKIP No extract path captured, can't remove paths ok 416 # SKIP No extract path captured, can't remove paths ok 417 - The object isa Archive::Extract ok 418 - Archive type recognized properly ok 419 - extract() for 'x.par' reports success (PP: 0 Bin: 1) ok 420 - No errors capturing buffers ok 421 - Found correct number of output files ok 422 - Found correct output file 'a' ok 423 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 424 - Extract dir found ok 425 - Extract dir exists ok 426 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 427 - Output file successfully removed ok 428 - rmtree gave no error ok 429 - Extract dir succesfully removed ok 430 # SKIP No buffers available ok 431 # SKIP No buffers available ok 432 # SKIP No buffers available ok 433 # SKIP No buffers available ok 434 # SKIP No buffers available ok 435 # SKIP No buffers available ok 436 # SKIP No buffers available ok 437 # SKIP No buffers available ok 438 - Output file successfully removed ok 439 - rmtree gave no error ok 440 - Extract dir succesfully removed ok 441 - The object isa Archive::Extract ok 442 - Archive type recognized properly ok 443 - extract() for 'y.tar.bz2' reports success (PP: 0 Bin: 1) ok 444 - No errors capturing buffers ok 445 - Found correct number of output files ok 446 - Found correct output file 'y/z' ok 447 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 448 - Extract dir found ok 449 - Extract dir exists ok 450 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 451 - Output file successfully removed ok 452 - rmtree gave no error ok 453 - Extract dir succesfully removed ok 454 # SKIP No buffers available ok 455 # SKIP No buffers available ok 456 # SKIP No buffers available ok 457 # SKIP No buffers available ok 458 # SKIP No buffers available ok 459 # SKIP No buffers available ok 460 # SKIP No buffers available ok 461 # SKIP No buffers available ok 462 - Output file successfully removed ok 463 # SKIP No extract path captured, can't remove paths ok 464 # SKIP No extract path captured, can't remove paths ok 465 - The object isa Archive::Extract ok 466 - Archive type recognized properly ok 467 - extract() for 'x.zip' reports success (PP: 0 Bin: 1) ok 468 - No errors capturing buffers ok 469 - Found correct number of output files ok 470 - Found correct output file 'a' ok 471 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 472 - Extract dir found ok 473 - Extract dir exists ok 474 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 475 - Output file successfully removed ok 476 - rmtree gave no error ok 477 - Extract dir succesfully removed ok 478 # SKIP No buffers available ok 479 # SKIP No buffers available ok 480 # SKIP No buffers available ok 481 # SKIP No buffers available ok 482 # SKIP No buffers available ok 483 # SKIP No buffers available ok 484 # SKIP No buffers available ok 485 # SKIP No buffers available ok 486 - Output file successfully removed ok 487 - rmtree gave no error ok 488 - Extract dir succesfully removed ok 489 - The object isa Archive::Extract ok 490 - Archive type recognized properly ok 491 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 492 - No errors capturing buffers ok 493 - Found correct number of output files ok 494 - Found correct output file 'y/z' ok 495 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 496 - Extract dir found ok 497 - Extract dir exists ok 498 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 499 - Output file successfully removed ok 500 - rmtree gave no error ok 501 - Extract dir succesfully removed ok 502 - extract() for 'y.tar.gz' reports success (PP: 1 Bin: 0) ok 503 - No errors capturing buffers ok 504 - Found correct number of output files ok 505 - Found correct output file 'y/z' ok 506 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 507 - Extract dir found ok 508 - Extract dir exists ok 509 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 510 - Output file successfully removed ok 511 - rmtree gave no error ok 512 - Extract dir succesfully removed ok 513 - The object isa Archive::Extract ok 514 - Archive type recognized properly ok 515 - extract() for 'double_dir.zip' reports success (PP: 1 Bin: 0) ok 516 - No errors capturing buffers ok 517 - Found correct number of output files ok 518 - Found correct output file 'x/w' ok 519 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/x/w' exists ok 520 - Extract dir found ok 521 - Extract dir exists ok 522 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/x' ok 523 - Output file successfully removed ok 524 - rmtree gave no error ok 525 - Extract dir succesfully removed ok 526 - extract() for 'double_dir.zip' reports success (PP: 1 Bin: 0) ok 527 - No errors capturing buffers ok 528 - Found correct number of output files ok 529 - Found correct output file 'x/w' ok 530 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/x/w' exists ok 531 - Extract dir found ok 532 - Extract dir exists ok 533 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/x' ok 534 - Output file successfully removed ok 535 - rmtree gave no error ok 536 - Extract dir succesfully removed ok 537 - The object isa Archive::Extract ok 538 - Archive type recognized properly ok 539 - extract() for 'y.jar' reports success (PP: 1 Bin: 0) ok 540 - No errors capturing buffers ok 541 - Found correct number of output files ok 542 - Found correct output file 'y/z' ok 543 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 544 - Extract dir found ok 545 - Extract dir exists ok 546 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 547 - Output file successfully removed ok 548 - rmtree gave no error ok 549 - Extract dir succesfully removed ok 550 - extract() for 'y.jar' reports success (PP: 1 Bin: 0) ok 551 - No errors capturing buffers ok 552 - Found correct number of output files ok 553 - Found correct output file 'y/z' ok 554 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 555 - Extract dir found ok 556 - Extract dir exists ok 557 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 558 - Output file successfully removed ok 559 - rmtree gave no error ok 560 - Extract dir succesfully removed ok 561 - The object isa Archive::Extract ok 562 - Archive type recognized properly ok 563 - extract() for 'x.bz2' reports success (PP: 1 Bin: 0) ok 564 - No errors capturing buffers ok 565 - Found correct number of output files ok 566 - Found correct output file 'a' ok 567 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 568 - Extract dir found ok 569 - Extract dir exists ok 570 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 571 - Output file successfully removed ok 572 - rmtree gave no error ok 573 - Extract dir succesfully removed ok 574 - extract() for 'x.bz2' reports success (PP: 1 Bin: 0) ok 575 - No errors capturing buffers ok 576 - Found correct number of output files ok 577 - Found correct output file 'a' ok 578 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 579 - Extract dir found ok 580 - Extract dir exists ok 581 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 582 - Output file successfully removed ok 583 - rmtree gave no error ok 584 - Extract dir succesfully removed ok 585 - The object isa Archive::Extract ok 586 - Archive type recognized properly ok 587 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 588 - No errors capturing buffers ok 589 - Found correct number of output files ok 590 - Found correct output file 'y/z' ok 591 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 592 - Extract dir found ok 593 - Extract dir exists ok 594 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 595 - Output file successfully removed ok 596 - rmtree gave no error ok 597 - Extract dir succesfully removed ok 598 - extract() for 'y.tgz' reports success (PP: 1 Bin: 0) ok 599 - No errors capturing buffers ok 600 - Found correct number of output files ok 601 - Found correct output file 'y/z' ok 602 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 603 - Extract dir found ok 604 - Extract dir exists ok 605 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 606 - Output file successfully removed ok 607 - rmtree gave no error ok 608 - Extract dir succesfully removed ok 609 - The object isa Archive::Extract ok 610 - Archive type recognized properly ok 611 - extract() for 'y.zip' reports success (PP: 1 Bin: 0) ok 612 - No errors capturing buffers ok 613 - Found correct number of output files ok 614 - Found correct output file 'y/z' ok 615 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 616 - Extract dir found ok 617 - Extract dir exists ok 618 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 619 - Output file successfully removed ok 620 - rmtree gave no error ok 621 - Extract dir succesfully removed ok 622 - extract() for 'y.zip' reports success (PP: 1 Bin: 0) ok 623 - No errors capturing buffers ok 624 - Found correct number of output files ok 625 - Found correct output file 'y/z' ok 626 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 627 - Extract dir found ok 628 - Extract dir exists ok 629 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 630 - Output file successfully removed ok 631 - rmtree gave no error ok 632 - Extract dir succesfully removed ok 633 - The object isa Archive::Extract ok 634 - Archive type recognized properly ok 635 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 636 - No errors capturing buffers ok 637 - Found correct number of output files ok 638 - Found correct output file 'a' ok 639 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 640 - Extract dir found ok 641 - Extract dir exists ok 642 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 643 - Output file successfully removed ok 644 - rmtree gave no error ok 645 - Extract dir succesfully removed ok 646 - extract() for 'x.tar.gz' reports success (PP: 1 Bin: 0) ok 647 - No errors capturing buffers ok 648 - Found correct number of output files ok 649 - Found correct output file 'a' ok 650 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 651 - Extract dir found ok 652 - Extract dir exists ok 653 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 654 - Output file successfully removed ok 655 - rmtree gave no error ok 656 - Extract dir succesfully removed ok 657 - The object isa Archive::Extract ok 658 - Archive type recognized properly ok 659 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 660 - No errors capturing buffers ok 661 - Found correct number of output files ok 662 - Found correct output file 'y/z' ok 663 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 664 - Extract dir found ok 665 - Extract dir exists ok 666 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 667 - Output file successfully removed ok 668 - rmtree gave no error ok 669 - Extract dir succesfully removed ok 670 - extract() for 'y.tar' reports success (PP: 1 Bin: 0) ok 671 - No errors capturing buffers ok 672 - Found correct number of output files ok 673 - Found correct output file 'y/z' ok 674 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 675 - Extract dir found ok 676 - Extract dir exists ok 677 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 678 - Output file successfully removed ok 679 - rmtree gave no error ok 680 - Extract dir succesfully removed ok 681 - The object isa Archive::Extract ok 682 - Archive type recognized properly ok 683 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 684 - No errors capturing buffers ok 685 - Found correct number of output files ok 686 - Found correct output file 'a' ok 687 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 688 - Extract dir found ok 689 - Extract dir exists ok 690 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 691 - Output file successfully removed ok 692 - rmtree gave no error ok 693 - Extract dir succesfully removed ok 694 - extract() for 'x.tgz' reports success (PP: 1 Bin: 0) ok 695 - No errors capturing buffers ok 696 - Found correct number of output files ok 697 - Found correct output file 'a' ok 698 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 699 - Extract dir found ok 700 - Extract dir exists ok 701 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 702 - Output file successfully removed ok 703 - rmtree gave no error ok 704 - Extract dir succesfully removed ok 705 - The object isa Archive::Extract ok 706 - Archive type recognized properly ok 707 - extract() for 'y.par' reports success (PP: 1 Bin: 0) ok 708 - No errors capturing buffers ok 709 - Found correct number of output files ok 710 - Found correct output file 'y/z' ok 711 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 712 - Extract dir found ok 713 - Extract dir exists ok 714 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 715 - Output file successfully removed ok 716 - rmtree gave no error ok 717 - Extract dir succesfully removed ok 718 - extract() for 'y.par' reports success (PP: 1 Bin: 0) ok 719 - No errors capturing buffers ok 720 - Found correct number of output files ok 721 - Found correct output file 'y/z' ok 722 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 723 - Extract dir found ok 724 - Extract dir exists ok 725 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 726 - Output file successfully removed ok 727 - rmtree gave no error ok 728 - Extract dir succesfully removed ok 729 - The object isa Archive::Extract ok 730 - Archive type recognized properly ok 731 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 732 - No errors capturing buffers ok 733 - Found correct number of output files ok 734 - Found correct output file 'y/z' ok 735 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 736 - Extract dir found ok 737 - Extract dir exists ok 738 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 739 - Output file successfully removed ok 740 - rmtree gave no error ok 741 - Extract dir succesfully removed ok 742 - extract() for 'y.tbz' reports success (PP: 1 Bin: 0) ok 743 - No errors capturing buffers ok 744 - Found correct number of output files ok 745 - Found correct output file 'y/z' ok 746 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 747 - Extract dir found ok 748 - Extract dir exists ok 749 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 750 - Output file successfully removed ok 751 - rmtree gave no error ok 752 - Extract dir succesfully removed ok 753 - The object isa Archive::Extract ok 754 - Archive type recognized properly ok 755 - extract() for 'x.Z' reports success (PP: 1 Bin: 0) ok 756 - No errors capturing buffers ok 757 - Found correct number of output files ok 758 - Found correct output file 'a' ok 759 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 760 - Extract dir found ok 761 - Extract dir exists ok 762 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 763 - Output file successfully removed ok 764 - rmtree gave no error ok 765 - Extract dir succesfully removed ok 766 - extract() for 'x.Z' reports success (PP: 1 Bin: 0) ok 767 - No errors capturing buffers ok 768 - Found correct number of output files ok 769 - Found correct output file 'a' ok 770 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 771 - Extract dir found ok 772 - Extract dir exists ok 773 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 774 - Output file successfully removed ok 775 - rmtree gave no error ok 776 - Extract dir succesfully removed ok 777 - The object isa Archive::Extract ok 778 - Archive type recognized properly ok 779 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 780 - No errors capturing buffers ok 781 - Found correct number of output files ok 782 - Found correct output file 'a' ok 783 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 784 - Extract dir found ok 785 - Extract dir exists ok 786 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 787 - Output file successfully removed ok 788 - rmtree gave no error ok 789 - Extract dir succesfully removed ok 790 - extract() for 'x.tar' reports success (PP: 1 Bin: 0) ok 791 - No errors capturing buffers ok 792 - Found correct number of output files ok 793 - Found correct output file 'a' ok 794 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 795 - Extract dir found ok 796 - Extract dir exists ok 797 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 798 - Output file successfully removed ok 799 - rmtree gave no error ok 800 - Extract dir succesfully removed ok 801 - The object isa Archive::Extract ok 802 - Archive type recognized properly ok 803 - extract() for 'x.gz' reports success (PP: 1 Bin: 0) ok 804 - No errors capturing buffers ok 805 - Found correct number of output files ok 806 - Found correct output file 'a' ok 807 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 808 - Extract dir found ok 809 - Extract dir exists ok 810 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 811 - Output file successfully removed ok 812 - rmtree gave no error ok 813 - Extract dir succesfully removed ok 814 - extract() for 'x.gz' reports success (PP: 1 Bin: 0) ok 815 - No errors capturing buffers ok 816 - Found correct number of output files ok 817 - Found correct output file 'a' ok 818 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 819 - Extract dir found ok 820 - Extract dir exists ok 821 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 822 - Output file successfully removed ok 823 - rmtree gave no error ok 824 - Extract dir succesfully removed ok 825 - The object isa Archive::Extract ok 826 - Archive type recognized properly ok 827 - extract() for 'x.jar' reports success (PP: 1 Bin: 0) ok 828 - No errors capturing buffers ok 829 - Found correct number of output files ok 830 - Found correct output file 'a' ok 831 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 832 - Extract dir found ok 833 - Extract dir exists ok 834 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 835 - Output file successfully removed ok 836 - rmtree gave no error ok 837 - Extract dir succesfully removed ok 838 - extract() for 'x.jar' reports success (PP: 1 Bin: 0) ok 839 - No errors capturing buffers ok 840 - Found correct number of output files ok 841 - Found correct output file 'a' ok 842 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 843 - Extract dir found ok 844 - Extract dir exists ok 845 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 846 - Output file successfully removed ok 847 - rmtree gave no error ok 848 - Extract dir succesfully removed ok 849 - The object isa Archive::Extract ok 850 - Archive type recognized properly ok 851 - extract() for 'x.lzma' reports success (PP: 1 Bin: 0) ok 852 - No errors capturing buffers ok 853 - Found correct number of output files ok 854 - Found correct output file 'a' ok 855 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 856 - Extract dir found ok 857 - Extract dir exists ok 858 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 859 - Output file successfully removed ok 860 - rmtree gave no error ok 861 - Extract dir succesfully removed ok 862 - extract() for 'x.lzma' reports success (PP: 1 Bin: 0) ok 863 - No errors capturing buffers ok 864 - Found correct number of output files ok 865 - Found correct output file 'a' ok 866 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 867 - Extract dir found ok 868 - Extract dir exists ok 869 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 870 - Output file successfully removed ok 871 - rmtree gave no error ok 872 - Extract dir succesfully removed ok 873 - The object isa Archive::Extract ok 874 - Archive type recognized properly ok 875 - extract() for 'x.par' reports success (PP: 1 Bin: 0) ok 876 - No errors capturing buffers ok 877 - Found correct number of output files ok 878 - Found correct output file 'a' ok 879 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 880 - Extract dir found ok 881 - Extract dir exists ok 882 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 883 - Output file successfully removed ok 884 - rmtree gave no error ok 885 - Extract dir succesfully removed ok 886 - extract() for 'x.par' reports success (PP: 1 Bin: 0) ok 887 - No errors capturing buffers ok 888 - Found correct number of output files ok 889 - Found correct output file 'a' ok 890 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 891 - Extract dir found ok 892 - Extract dir exists ok 893 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 894 - Output file successfully removed ok 895 - rmtree gave no error ok 896 - Extract dir succesfully removed ok 897 - The object isa Archive::Extract ok 898 - Archive type recognized properly ok 899 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 900 - No errors capturing buffers ok 901 - Found correct number of output files ok 902 - Found correct output file 'y/z' ok 903 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 904 - Extract dir found ok 905 - Extract dir exists ok 906 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 907 - Output file successfully removed ok 908 - rmtree gave no error ok 909 - Extract dir succesfully removed ok 910 - extract() for 'y.tar.bz2' reports success (PP: 1 Bin: 0) ok 911 - No errors capturing buffers ok 912 - Found correct number of output files ok 913 - Found correct output file 'y/z' ok 914 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y/z' exists ok 915 - Extract dir found ok 916 - Extract dir exists ok 917 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/y' ok 918 - Output file successfully removed ok 919 - rmtree gave no error ok 920 - Extract dir succesfully removed ok 921 - The object isa Archive::Extract ok 922 - Archive type recognized properly ok 923 - extract() for 'x.zip' reports success (PP: 1 Bin: 0) ok 924 - No errors capturing buffers ok 925 - Found correct number of output files ok 926 - Found correct output file 'a' ok 927 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 928 - Extract dir found ok 929 - Extract dir exists ok 930 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 931 - Output file successfully removed ok 932 - rmtree gave no error ok 933 - Extract dir succesfully removed ok 934 - extract() for 'x.zip' reports success (PP: 1 Bin: 0) ok 935 - No errors capturing buffers ok 936 - Found correct number of output files ok 937 - Found correct output file 'a' ok 938 - Output file '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out/a' exists ok 939 - Extract dir found ok 940 - Extract dir exists ok 941 - Extract dir is expected '/Users/fly818/var/cpan/build/Archive-Extract-0.28-Vj99o4/t/out' ok 942 - Output file successfully removed ok 943 - rmtree gave no error ok 944 - Extract dir succesfully removed 1..944 # Looks like you failed 12 tests of 944. Dubious, test returned 12 (wstat 3072, 0xc00) Failed 12/944 subtests (less 176 skipped subtests: 756 okay) Test Summary Report ------------------- t/01_Archive-Extract (Wstat: 3072 Tests: 944 Failed: 12) Failed tests: 299, 301-302, 304-306, 310, 312-313, 315-317 Non-zero exit status: 12 Files=1, Tests=944, 7 wallclock secs ( 0.55 usr 0.11 sys + 2.29 cusr 4.61 csys = 7.56 CPU) Result: FAIL Failed 1/1 test programs. 12/944 subtests failed. make: *** [test_dynamic] Error 12 KANE/Archive-Extract-0.28.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports KANE/Archive-Extract-0.28.tar.gz Running make for L/LB/LBROCARD/Git-PurePerl-0.32.tar.gz Has already been unwrapped into directory /Users/fly818/var/cpan/build/Git-PurePerl-0.32-7o6i4Y CPAN.pm: Going to build L/LB/LBROCARD/Git-PurePerl-0.32.tar.gz Warning: Prerequisite 'Archive::Extract => 0' for 'LBROCARD/Git-PurePerl-0.32.tar.gz' failed when processing 'KANE/Archive-Extract-0.28.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/Git/PurePerl.pm blib/lib/Git/PurePerl.pm cp lib/Git/PurePerl/Object/Tree.pm blib/lib/Git/PurePerl/Object/Tree.pm cp lib/Git/PurePerl/Object/Blob.pm blib/lib/Git/PurePerl/Object/Blob.pm cp lib/Git/PurePerl/Object.pm blib/lib/Git/PurePerl/Object.pm cp lib/Git/PurePerl/Object/Commit.pm blib/lib/Git/PurePerl/Object/Commit.pm cp lib/Git/PurePerl/DirectoryEntry.pm blib/lib/Git/PurePerl/DirectoryEntry.pm cp lib/Git/PurePerl/Pack.pm blib/lib/Git/PurePerl/Pack.pm Manifying blib/man3/Git::PurePerl.3 LBROCARD/Git-PurePerl-0.32.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /Users/fly818/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00_setup.... 1..1 Can't locate Archive/Extract.pm in @INC (@INC contains: /Users/fly818/Library/ActivePerl/lib /Users/fly818/var/cpan/build/Git-PurePerl-0.32-7o6i4Y/blib/lib /Users/fly818/var/cpan/build/Git-PurePerl-0.32-7o6i4Y/blib/arch /Users/fly818/var/megalib /Users/fly818/ap818/site/lib /Users/fly818/ap818/lib .) at t/00_setup.t line 5. BEGIN failed--compilation aborted at t/00_setup.t line 5. # Looks like your test exited with 2 before it could output anything. Dubious, test returned 2 (wstat 512, 0x200) Failed 1/1 subtests t/simple...... 1..34 Can't open directory test-project/.git/objects/pack: No such file or directory at /Users/fly818/var/cpan/build/Git-PurePerl-0.32-7o6i4Y/blib/lib/Git/PurePerl.pm line 29 # Looks like your test exited with 2 before it could output anything. Dubious, test returned 2 (wstat 512, 0x200) Failed 34/34 subtests Test Summary Report ------------------- t/00_setup (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 1 tests but ran 0. t/simple (Wstat: 512 Tests: 0 Failed: 0) Non-zero exit status: 2 Parse errors: Bad plan. You planned 34 tests but ran 0. Files=2, Tests=0, 2 wallclock secs ( 0.06 usr 0.03 sys + 1.08 cusr 0.27 csys = 1.44 CPU) Result: FAIL Failed 2/2 test programs. 0/0 subtests failed. make: *** [test_dynamic] Error 2 LBROCARD/Git-PurePerl-0.32.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports LBROCARD/Git-PurePerl-0.32.tar.gz Finished 2008-11-15T12:17:13