PATH=/usr/bin:/bin:/home/fly1800/var/megalib/bin
Start 2014-12-20T08:00:55
ActivePerl-1800 CPAN-2.00
Reading '/home/fly1800/var/cpan/Metadata'
Database was generated on Sat, 20 Dec 2014 14:53:16 GMT
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
Checksum for /home/fly1800/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz ok
Perinci-CmdLine-Lite-0.70/
Perinci-CmdLine-Lite-0.70/Changes
Perinci-CmdLine-Lite-0.70/LICENSE
Perinci-CmdLine-Lite-0.70/MANIFEST
Perinci-CmdLine-Lite-0.70/lib/
Perinci-CmdLine-Lite-0.70/lib/Test/
Perinci-CmdLine-Lite-0.70/lib/Test/Perinci/
Perinci-CmdLine-Lite-0.70/lib/Test/Perinci/CmdLine.pm
Perinci-CmdLine-Lite-0.70/lib/Perinci/
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual.pod
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual/
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual/Examples.pod
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Manual/FAQ.pod
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Base.pm
Perinci-CmdLine-Lite-0.70/lib/Perinci/CmdLine/Lite.pm
Perinci-CmdLine-Lite-0.70/README
Perinci-CmdLine-Lite-0.70/META.json
Perinci-CmdLine-Lite-0.70/Makefile.PL
Perinci-CmdLine-Lite-0.70/dist.ini
Perinci-CmdLine-Lite-0.70/t/
Perinci-CmdLine-Lite-0.70/t/release-rinci.t
Perinci-CmdLine-Lite-0.70/t/complete.t
Perinci-CmdLine-Lite-0.70/t/release-pod-coverage.t
Perinci-CmdLine-Lite-0.70/t/00-compile.t
Perinci-CmdLine-Lite-0.70/t/01-embed.t
Perinci-CmdLine-Lite-0.70/t/run.t
Perinci-CmdLine-Lite-0.70/t/release-pod-syntax.t
Perinci-CmdLine-Lite-0.70/weaver.ini
Perinci-CmdLine-Lite-0.70/META.yml
CPAN.pm: Building P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Warning: prerequisite Perinci::Sub::Complete 0.69 not found. We have 0.68.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::CmdLine::Lite
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz ----
Perinci::Sub::Complete [requires]
Running make test
Delayed until after prerequisites
Running test for module 'Perinci::Sub::Complete'
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
Fetching with LWP:
http://cpan.nas1.activestate.com/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
Checksum for /home/fly1800/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz ok
Perinci-Sub-Complete-0.69/
Perinci-Sub-Complete-0.69/Changes
Perinci-Sub-Complete-0.69/LICENSE
Perinci-Sub-Complete-0.69/MANIFEST
Perinci-Sub-Complete-0.69/lib/
Perinci-Sub-Complete-0.69/lib/Perinci/
Perinci-Sub-Complete-0.69/lib/Perinci/Sub/
Perinci-Sub-Complete-0.69/lib/Perinci/Sub/Complete.pm
Perinci-Sub-Complete-0.69/README
Perinci-Sub-Complete-0.69/META.json
Perinci-Sub-Complete-0.69/Makefile.PL
Perinci-Sub-Complete-0.69/dist.ini
Perinci-Sub-Complete-0.69/t/
Perinci-Sub-Complete-0.69/t/complete_from_schema.t
Perinci-Sub-Complete-0.69/t/release-rinci.t
Perinci-Sub-Complete-0.69/t/release-pod-coverage.t
Perinci-Sub-Complete-0.69/t/00-compile.t
Perinci-Sub-Complete-0.69/t/complete_arg_val.t
Perinci-Sub-Complete-0.69/t/release-pod-syntax.t
Perinci-Sub-Complete-0.69/t/complete_cli_arg.t
Perinci-Sub-Complete-0.69/t/complete_arg_elem.t
Perinci-Sub-Complete-0.69/weaver.ini
Perinci-Sub-Complete-0.69/META.yml
CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Warning: prerequisite Perinci::Sub::Util 0.38 not found. We have 0.37.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::Complete
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz ----
Perinci::Sub::Util [requires]
Running make test
Delayed until after prerequisites
Running test for module 'Perinci::Sub::Util'
Running make for P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
Checksum for /home/fly1800/var/cpan/sources/authors/id/P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz ok
Perinci-Sub-Util-0.40/
Perinci-Sub-Util-0.40/Changes
Perinci-Sub-Util-0.40/LICENSE
Perinci-Sub-Util-0.40/MANIFEST
Perinci-Sub-Util-0.40/lib/
Perinci-Sub-Util-0.40/lib/Perinci/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/ResObj.pm
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util/Sort.pm
Perinci-Sub-Util-0.40/lib/Perinci/Sub/Util.pm
Perinci-Sub-Util-0.40/README
Perinci-Sub-Util-0.40/META.json
Perinci-Sub-Util-0.40/Makefile.PL
Perinci-Sub-Util-0.40/dist.ini
Perinci-Sub-Util-0.40/t/
Perinci-Sub-Util-0.40/t/release-rinci.t
Perinci-Sub-Util-0.40/t/release-pod-coverage.t
Perinci-Sub-Util-0.40/t/caller.t
Perinci-Sub-Util-0.40/t/00-compile.t
Perinci-Sub-Util-0.40/t/gen_modified_sub.t
Perinci-Sub-Util-0.40/t/err.t
Perinci-Sub-Util-0.40/t/release-pod-syntax.t
Perinci-Sub-Util-0.40/weaver.ini
Perinci-Sub-Util-0.40/META.yml
CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for Perinci::Sub::Util
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Perinci/Sub/Util/Sort.pm blib/lib/Perinci/Sub/Util/Sort.pm
cp lib/Perinci/Sub/Util/ResObj.pm blib/lib/Perinci/Sub/Util/ResObj.pm
cp lib/Perinci/Sub/Util.pm blib/lib/Perinci/Sub/Util.pm
Manifying 3 pod documents
PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..3
ok 1 - Perinci/Sub/Util.pm loaded ok
ok 2 - Perinci/Sub/Util/ResObj.pm loaded ok
ok 3 - Perinci/Sub/Util/Sort.pm loaded ok
ok
t/caller.t ................
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
1..6
ok
t/err.t ...................
# Subtest: defaults
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - message
ok 6 - result
ok 7 - result metadata is hash
1..7
ok 1 - defaults
# Subtest: set status
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 400
1..4
ok 2 - set status
# Subtest: set message
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - message
1..5
ok 3 - set message
# Subtest: set prev
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 400
ok 5 - message
ok 6 - prev
1..6
ok 4 - set prev
# Subtest: caller
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - message
ok 6 - log[0] type
ok 7 - log[0] time
ok 8 - log[0] package
ok 9 - log[0] func
ok 10 - log[0] line
1..10
ok 5 - caller
# Subtest: stack_trace
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 500
ok 5 - stack_trace
1..5
ok 6 - stack_trace
# Subtest: stack_trace only produced once
ok 1 - func doesn't die
ok 2 - result is defined
ok 3 - result is an array
ok 4 - status is 501
ok 5 - stack_trace
1..5
ok 7 - stack_trace only produced once
1..7
ok
t/gen_modified_sub.t ......
ok 1
ok 2
1..2
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=7, Tests=18, 0 wallclock secs ( 0.04 usr 0.01 sys + 0.36 cusr 0.06 csys = 0.47 CPU)
Result: PASS
PERLANCAR/Perinci-Sub-Util-0.40.tar.gz
make test TEST_VERBOSE=1 -- OK
PPD for Perinci-Sub-Util-0.40 already made
Running make for P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
>>> make
cp lib/Perinci/Sub/Complete.pm blib/lib/Perinci/Sub/Complete.pm
Manifying 1 pod document
PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
make -- OK
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..1
ok 1 - Perinci/Sub/Complete.pm loaded ok
ok
t/complete_arg_elem.t .....
ok 1
1..1
ok
t/complete_arg_val.t ......
ok 1
1..1
ok
t/complete_cli_arg.t ......
# Subtest: arg name (no dash)
ok 1 - result
1..1
ok 1 - arg name (no dash)
# Subtest: arg name 2 (dash)
ok 1 - result
1..1
ok 2 - arg name 2 (dash)
# Subtest: arg name 3 (sole completion)
ok 1 - result
1..1
ok 3 - arg name 3 (sole completion)
# Subtest: arg name 3 (unknown option)
ok 1 - result
1..1
ok 4 - arg name 3 (unknown option)
# Subtest: arg value (schema)
ok 1 - result
1..1
ok 5 - arg value (schema)
# Subtest: arg value (schema) #2
ok 1 - result
1..1
ok 6 - arg value (schema) \#2
# Subtest: arg value (spec "completion")
ok 1 - result
1..1
ok 7 - arg value (spec "completion")
# Subtest: arg value, pos
ok 1 - result
1..1
ok 8 - arg value, pos
# Subtest: arg value, pos + greedy
ok 1 - result
1..1
ok 9 - arg value, pos + greedy
# Subtest: custom completion (option value for function arg)
ok 1 - result
1..1
ok 10 - custom completion (option value for function arg)
# Subtest: custom completion (option value for common option)
ok 1 - result
1..1
ok 11 - custom completion (option value for common option)
# Subtest: custom completion (option value, unknown option)
ok 1 - result
1..1
ok 12 - custom completion (option value, unknown option)
# Subtest: custom completion (positional cli arg with no matching function arg)
ok 1 - result
1..1
ok 13 - custom completion (positional cli arg with no matching function arg)
# Subtest: custom completion (positional cli arg for non-greedy arg)
ok 1 - result
1..1
ok 14 - custom completion (positional cli arg for non-greedy arg)
# Subtest: custom completion (positional cli arg for greedy arg)
ok 1 - result
1..1
ok 15 - custom completion (positional cli arg for greedy arg)
# Subtest: args passed to completion routine
# Subtest: in arg completion property
ok 1
ok 2
ok 3 - result
1..3
ok 1 - in arg completion property
# Subtest: in arg element_completion property
ok 1
ok 2 - result
1..2
ok 2 - in arg element_completion property
# Subtest: in custom completion
ok 1
ok 2 - result
1..2
ok 3 - in custom completion
1..3
ok 16 - args passed to completion routine
1..16
ok
t/complete_from_schema.t ..
# Subtest: int
# Subtest: min/max below limit
ok 1
1..1
ok 1 - min/max below limit
# Subtest: min/xmax below limit
ok 1
1..1
ok 2 - min/xmax below limit
# Subtest: xmin/max below limit
ok 1
1..1
ok 3 - xmin/max below limit
# Subtest: xmin/xmax below limit
ok 1
1..1
ok 4 - xmin/xmax below limit
# Subtest: between below limit
ok 1
1..1
ok 5 - between below limit
# Subtest: xbetween below limit
ok 1
1..1
ok 6 - xbetween below limit
# Subtest: digit by digit completion
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 7 - digit by digit completion
# Subtest: digit by digit completion, with min/max
ok 1
ok 2
ok 3
ok 4
ok 5
1..5
ok 8 - digit by digit completion, with min/max
1..8
ok 1 - int
# Subtest: float
# Subtest: digit by digit completion
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
1..7
ok 1 - digit by digit completion
# Subtest: digit by digit completion, with min/max
ok 1
ok 2
ok 3
ok 4
1..4
ok 2 - digit by digit completion, with min/max
1..2
ok 2 - float
1..2
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
All tests successful.
Files=8, Tests=21, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.48 cusr 0.08 csys = 0.62 CPU)
Result: PASS
PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
make test TEST_VERBOSE=1 -- OK
perlancar <perlancar@gmail.com>
Complete command-line argument using Rinci metadata
>>> (cd /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx && tar cvf - Perinci-Sub-Complete-0.69.ppd blib) | gzip -c >/home/fly1800/var/REPO/P/PE/PERLANCAR/Perinci-Sub-Complete-0.69.tar.gz
Perinci-Sub-Complete-0.69.ppd
blib/
blib/man3/
blib/man3/Perinci::Sub::Complete.3
blib/lib/
blib/lib/Perinci/
blib/lib/Perinci/Sub/
blib/lib/Perinci/Sub/Complete.pm
>>> mv /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/Perinci-Sub-Complete-0.69.ppd /home/fly1800/var/REPO/P/PE/PERLANCAR
Running make for P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/blib/lib /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/lib to PERL5LIB for 'get'
Has already been unwrapped into directory /home/fly1800/var/cpan/build/Perinci-CmdLine-Lite-0.70-bzigy_
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/blib/lib /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/lib to PERL5LIB for 'make'
CPAN.pm: Building P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
>>> make
cp lib/Perinci/CmdLine/Lite.pm blib/lib/Perinci/CmdLine/Lite.pm
cp lib/Perinci/CmdLine/Manual/FAQ.pod blib/lib/Perinci/CmdLine/Manual/FAQ.pod
cp lib/Perinci/CmdLine/Manual.pod blib/lib/Perinci/CmdLine/Manual.pod
cp lib/Test/Perinci/CmdLine.pm blib/lib/Test/Perinci/CmdLine.pm
cp lib/Perinci/CmdLine/Base.pm blib/lib/Perinci/CmdLine/Base.pm
cp lib/Perinci/CmdLine/Manual/Examples.pod blib/lib/Perinci/CmdLine/Manual/Examples.pod
Manifying 6 pod documents
PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
make -- OK
Prepending /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Complete-0.69-v2RCDx/blib/lib /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/arch /home/fly1800/var/cpan/build/Perinci-Sub-Util-0.40-KlAzD7/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1800/ap1800-297235/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-compile.t ............
1..3
ok 1 - Perinci/CmdLine/Base.pm loaded ok
ok 2 - Perinci/CmdLine/Lite.pm loaded ok
ok 3 - Test/Perinci/CmdLine.pm loaded ok
ok
t/01-embed.t ..............
# Subtest: test_run: run works
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: run works
# Subtest: test_complete: cmd --bar^
ok 1 - exit code = 0
ok 2 - result
1..2
ok 2 - test_complete: cmd --bar^
1..2
ok
t/complete.t ..............
# Subtest: test_complete: cmd --s1 ap^
ok 1 - exit code = 0
ok 2 - result
1..2
ok 1 - test_complete: cmd --s1 ap^
1..1
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/release-rinci.t ......... skipped: these tests are for release candidate testing
t/run.t ...................
# Subtest: help action
# Subtest: test_run: --help
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: --help
# Subtest: test_run: has subcommands
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 2 - test_run: has subcommands
# Subtest: test_run: help on subcommand
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 3 - test_run: help on subcommand
1..3
ok 1 - help action
# Subtest: version action
# Subtest: test_run: --version
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: --version
1..1
ok 2 - version action
# Subtest: subcommands action
# Subtest: test_run: --subcommands
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: --subcommands
# Subtest: test_run: unknown subcommand = error
ok 1 - doesn't die
ok 2 - exit code
1..2
ok 2 - test_run: unknown subcommand = error
# Subtest: test_run: default_subcommand
ok 1 - doesn't die
ok 2 - exit code
1..2
ok 3 - test_run: default_subcommand
# Subtest: test_run: default_subcommand 2
ok 1 - doesn't die
ok 2 - exit code
1..2
ok 4 - test_run: default_subcommand 2
1..4
ok 3 - subcommands action
# Subtest: output formats
# Subtest: test_run: --json
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: --json
# Subtest: text-pretty
# Subtest: test_run: undef
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: undef
# Subtest: test_run: scalar
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 2 - test_run: scalar
# Subtest: test_run: empty array
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 3 - test_run: empty array
# Subtest: test_run: aos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 4 - test_run: aos
# Subtest: test_run: aoaos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 5 - test_run: aoaos
# Subtest: test_run: aohos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 6 - test_run: aohos
# Subtest: test_run: hos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 7 - test_run: hos
# Subtest: test_run: hohos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 8 - test_run: hohos
1..8
ok 2 - text-pretty
# Subtest: text-simple
# Subtest: test_run: undef
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: undef
# Subtest: test_run: scalar
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 2 - test_run: scalar
# Subtest: test_run: empty array
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 3 - test_run: empty array
# Subtest: test_run: aos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 4 - test_run: aos
# Subtest: test_run: aoaos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 5 - test_run: aoaos
# Subtest: test_run: aohos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 6 - test_run: aohos
# Subtest: test_run: hos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 7 - test_run: hos
# Subtest: test_run: hohos
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 8 - test_run: hohos
1..8
ok 3 - text-simple
1..3
ok 4 - output formats
# Subtest: call action
# Subtest: test_run: single command
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 1 - test_run: single command
# Subtest: test_run: default property of arg spec is observed
ok 1 - doesn't die
ok 2 - exit code
ok 3 - default number of pairs
1..3
ok 2 - test_run: default property of arg spec is observed
# Subtest: test_run: schema default of arg is observed
ok 1 - doesn't die
ok 2 - exit code
1..2
ok 3 - test_run: schema default of arg is observed
# Subtest: test_run: multiple subcommands (subcommand not specified -> help)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 4 - test_run: multiple subcommands (subcommand not specified -> help)
# Subtest: test_run: multiple subcommands (subc specified via first cli arg)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 5 - test_run: multiple subcommands (subc specified via first cli arg)
# Subtest: test_run: multiple subcommands (subc specified via default_subcommand)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 6 - test_run: multiple subcommands (subc specified via default_subcommand)
# Subtest: test_run: multiple subcommands (subc specified via --cmd)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 7 - test_run: multiple subcommands (subc specified via --cmd)
# Subtest: test_run: args_as array
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 8 - test_run: args_as array
# Subtest: test_run: args_as arrayref
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 9 - test_run: args_as arrayref
# Subtest: test_run: args_as hashref
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 10 - test_run: args_as hashref
# Subtest: test_run: result_naked
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 11 - test_run: result_naked
1..11
ok 5 - call action
# Subtest: cmdline_src
# Subtest: test_run: unknown value
ok 1 - doesn't die
ok 2 - status
1..2
ok 1 - test_run: unknown value
# Subtest: test_run: arg type not str/array
ok 1 - doesn't die
ok 2 - status
1..2
ok 2 - test_run: arg type not str/array
# Subtest: test_run: multiple stdin
ok 1 - doesn't die
ok 2 - status
1..2
ok 3 - test_run: multiple stdin
# Subtest: test_run: file 1
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 4 - test_run: file 1
# Subtest: test_run: file 1 (special hint arguments passed)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 5 - test_run: file 1 (special hint arguments passed)
# Subtest: test_run: file 2
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 6 - test_run: file 2
# Subtest: test_run: file 2 (special hint arguments passed)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 7 - test_run: file 2 (special hint arguments passed)
# Subtest: test_run: file not found
ok 1 - doesn't die
ok 2 - status
1..2
ok 8 - test_run: file not found
# Subtest: test_run: file, missing required arg
ok 1 - doesn't die
ok 2 - status
1..2
ok 9 - test_run: file, missing required arg
# Subtest: test_run: stdin_or_files file
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 10 - test_run: stdin_or_files file
# Subtest: test_run: stdin_or_files file (special hint arguments passed)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 11 - test_run: stdin_or_files file (special hint arguments passed)
# Subtest: test_run: stdin_or_files file not found
ok 1 - doesn't die
ok 2 - status
1..2
ok 12 - test_run: stdin_or_files file not found
# Subtest: test_run: stdin str
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 13 - test_run: stdin str
# Subtest: test_run: stdin str (special hint arguments passed)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 14 - test_run: stdin str (special hint arguments passed)
# Subtest: test_run: stdin array
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 15 - test_run: stdin array
# Subtest: test_run: stdin + arg set to "-"
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 16 - test_run: stdin + arg set to "-"
# Subtest: test_run: stdin + arg set to non "-"
ok 1 - doesn't die
ok 2 - status
1..2
ok 17 - test_run: stdin + arg set to non "-"
# Subtest: test_run: stdin_line + from stdin
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 18 - test_run: stdin_line + from stdin
# Subtest: test_run: stdin_line + from stdin (special hint arguments passed)
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 19 - test_run: stdin_line + from stdin (special hint arguments passed)
# Subtest: test_run: stdin_line + from cmdline
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 20 - test_run: stdin_line + from cmdline
# Subtest: test_run: multi stdin_line
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 21 - test_run: multi stdin_line
1..21
ok 6 - cmdline_src
# Subtest: result metadata
# Subtest: cmdline.exit_code
# Subtest: test_run:
ok 1 - doesn't die
ok 2 - exit code
ok 3 - status
1..3
ok 1 - test_run:
1..1
ok 1 - cmdline.exit_code
# Subtest: cmdline.result
# Subtest: test_run:
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 1 - test_run:
1..1
ok 2 - cmdline.result
# Subtest: cmdline.default_format
# Subtest: test_run:
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 1 - test_run:
# Subtest: test_run: --format text
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 2 - test_run: --format text
1..2
ok 3 - cmdline.default_format
# Subtest: cmdline.skip_format
# Subtest: test_run:
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 1 - test_run:
1..1
ok 4 - cmdline.skip_format
1..4
ok 7 - result metadata
# Subtest: config
# Subtest: test_run: config_dirs
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 1 - test_run: config_dirs
# Subtest: test_run: config_filename
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 2 - test_run: config_filename
# Subtest: test_run: --no-config
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 3 - test_run: --no-config
# Subtest: test_run: --config-path
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 4 - test_run: --config-path
# Subtest: test_run: --config-profile
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 5 - test_run: --config-profile
# Subtest: test_run: unknown config profile -> error
ok 1 - doesn't die
ok 2 - status
1..2
ok 6 - test_run: unknown config profile -> error
# Subtest: test_run: unknown config profile but does not read config -> ok
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 7 - test_run: unknown config profile but does not read config -> ok
# Subtest: test_run: unknown config profile but set ignore_missing_config_profile_section -> ok
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 8 - test_run: unknown config profile but set ignore_missing_config_profile_section -> ok
# Subtest: test_run: subcommand
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 9 - test_run: subcommand
# Subtest: test_run: subcommand + --config-profile
ok 1 - doesn't die
ok 2 - output_re
1..2
ok 10 - test_run: subcommand + --config-profile
# Subtest: test_run: array-ify if argument is array
ok 1 - doesn't die
ok 2 - exit code
ok 3 - output_re
1..3
ok 11 - test_run: array-ify if argument is array
1..11
ok 8 - config
1..8
ok
All tests successful.
Files=7, Tests=14, 1 wallclock secs ( 0.05 usr 0.06 sys + 1.09 cusr 0.17 csys = 1.37 CPU)
Result: PASS
PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
make test TEST_VERBOSE=1 -- OK
perlancar <perlancar@gmail.com>
A lightweight Rinci/Riap-based command-line application framework
>>> (cd /home/fly1800/var/cpan/build/Perinci-CmdLine-Lite-0.70-bzigy_ && tar cvf - Perinci-CmdLine-Lite-0.70.ppd blib) | gzip -c >/home/fly1800/var/REPO/P/PE/PERLANCAR/Perinci-CmdLine-Lite-0.70.tar.gz
Perinci-CmdLine-Lite-0.70.ppd
blib/
blib/man3/
blib/man3/Perinci::CmdLine::Base.3
blib/man3/Perinci::CmdLine::Manual.3
blib/man3/Perinci::CmdLine::Lite.3
blib/man3/Perinci::CmdLine::Manual::Examples.3
blib/man3/Test::Perinci::CmdLine.3
blib/man3/Perinci::CmdLine::Manual::FAQ.3
blib/lib/
blib/lib/Test/
blib/lib/Test/Perinci/
blib/lib/Test/Perinci/CmdLine.pm
blib/lib/Perinci/
blib/lib/Perinci/CmdLine/
blib/lib/Perinci/CmdLine/Manual/
blib/lib/Perinci/CmdLine/Manual/FAQ.pod
blib/lib/Perinci/CmdLine/Manual/Examples.pod
blib/lib/Perinci/CmdLine/Manual.pod
blib/lib/Perinci/CmdLine/Base.pm
blib/lib/Perinci/CmdLine/Lite.pm
>>> mv /home/fly1800/var/cpan/build/Perinci-CmdLine-Lite-0.70-bzigy_/Perinci-CmdLine-Lite-0.70.ppd /home/fly1800/var/REPO/P/PE/PERLANCAR
VmSize: 142716 kB
Finished 2014-12-20T08:01:06