PATH=/usr/bin:/bin
Start 2013-06-17T08:26:34
ActivePerl-1800 CPAN-2.00
Reading '/home/fly1800/var/cpan/Metadata'
  Database was generated on Mon, 17 Jun 2013 12:17:03 GMT
Running make for V/VV/VVELOX/ZConf-GUI-1.1.0.tar.gz
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-GUI-1.1.0.tar.gz ok
ZConf-GUI-1.1.0/
ZConf-GUI-1.1.0/t/
ZConf-GUI-1.1.0/lib/
ZConf-GUI-1.1.0/MANIFEST
ZConf-GUI-1.1.0/bin/
ZConf-GUI-1.1.0/Makefile.PL
ZConf-GUI-1.1.0/Changes
ZConf-GUI-1.1.0/.cvsignore
ZConf-GUI-1.1.0/README
ZConf-GUI-1.1.0/bin/zcgui-which
ZConf-GUI-1.1.0/bin/zcgui-gux
ZConf-GUI-1.1.0/bin/zcgui-lm
ZConf-GUI-1.1.0/bin/zcgui-set
ZConf-GUI-1.1.0/bin/zcgui-la
ZConf-GUI-1.1.0/bin/.exists
ZConf-GUI-1.1.0/bin/zcgui-get
ZConf-GUI-1.1.0/bin/zcgui-sux
ZConf-GUI-1.1.0/lib/ZConf/
ZConf-GUI-1.1.0/lib/ZConf/GUI.pm
ZConf-GUI-1.1.0/t/boilerplate.t
ZConf-GUI-1.1.0/t/pod.t
ZConf-GUI-1.1.0/t/pod-coverage.t
ZConf-GUI-1.1.0/t/00-load.t

  CPAN.pm: Building V/VV/VVELOX/ZConf-GUI-1.1.0.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Warning: prerequisite ZConf 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for ZConf::GUI
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
----       VVELOX/ZConf-GUI-1.1.0.tar.gz      ----
    ZConf [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'ZConf'
Running make for V/VV/VVELOX/ZConf-6.1.0.tar.gz
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-6.1.0.tar.gz ok
ZConf-6.1.0/
ZConf-6.1.0/t/
ZConf-6.1.0/zconf ldap.schema
ZConf-6.1.0/lib/
ZConf-6.1.0/TODO
ZConf-6.1.0/bin/
ZConf-6.1.0/MANIFEST
ZConf-6.1.0/Makefile.PL
ZConf-6.1.0/Changes
ZConf-6.1.0/.cvsignore
ZConf-6.1.0/README
ZConf-6.1.0/bin/zccreate
ZConf-6.1.0/bin/zcchooser-run
ZConf-6.1.0/bin/zcvls
ZConf-6.1.0/bin/zcchooser-edit
ZConf-6.1.0/bin/zccdump
ZConf-6.1.0/bin/zcvdel
ZConf-6.1.0/bin/zcchooser-set
ZConf-6.1.0/bin/zcset
ZConf-6.1.0/bin/zcls
ZConf-6.1.0/bin/zcrm
ZConf-6.1.0/bin/zcchooser-get
ZConf-6.1.0/bin/zcget
ZConf-6.1.0/lib/ZConf/
ZConf-6.1.0/lib/ZConf.pm
ZConf-6.1.0/lib/ZConf/backends/
ZConf-6.1.0/lib/ZConf/backends/file.pm
ZConf-6.1.0/lib/ZConf/backends/ldap.pm
ZConf-6.1.0/t/01-load.t
ZConf-6.1.0/t/02-load.t
ZConf-6.1.0/t/boilerplate.t
ZConf-6.1.0/t/pod.t
ZConf-6.1.0/t/pod-coverage.t
ZConf-6.1.0/t/00-load.t

  CPAN.pm: Building V/VV/VVELOX/ZConf-6.1.0.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Warning: prerequisite Chooser 0 not found.
Warning: prerequisite Net::LDAP::AutoDNs 0 not found.
Warning: prerequisite Net::LDAP::AutoServer 0 not found.
Warning: prerequisite Net::LDAP::LDAPhash 0 not found.
Warning: prerequisite Net::LDAP::Makepath 0 not found.
Warning: prerequisite ZML 0 not found.
Checking if your kit is complete...
Warning: the following files are missing in your kit:
	zconf
Please inform the author.
Writing Makefile for ZConf
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
----         VVELOX/ZConf-6.1.0.tar.gz        ----
    Net::LDAP::LDAPhash [requires]
    Net::LDAP::Makepath [requires]
    Net::LDAP::AutoDNs [requires]
    Chooser [requires]
    Net::LDAP::AutoServer [requires]
    ZML [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Net::LDAP::LDAPhash'
Running make for V/VV/VVELOX/Net-LDAP-LDAPhash-1.0.3.tar.gz
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-LDAPhash-1.0.3.tar.gz ok
Net-LDAP-LDAPhash-1.0.3/
Net-LDAP-LDAPhash-1.0.3/t/
Net-LDAP-LDAPhash-1.0.3/lib/
Net-LDAP-LDAPhash-1.0.3/Changes
Net-LDAP-LDAPhash-1.0.3/.cvsignore
Net-LDAP-LDAPhash-1.0.3/README
Net-LDAP-LDAPhash-1.0.3/Makefile.PL
Net-LDAP-LDAPhash-1.0.3/MANIFEST
Net-LDAP-LDAPhash-1.0.3/lib/Net/
Net-LDAP-LDAPhash-1.0.3/lib/Net/LDAP/
Net-LDAP-LDAPhash-1.0.3/lib/Net/LDAP/LDAPhash.pm
Net-LDAP-LDAPhash-1.0.3/t/boilerplate.t
Net-LDAP-LDAPhash-1.0.3/t/pod.t
Net-LDAP-LDAPhash-1.0.3/t/00-load.t

  CPAN.pm: Building V/VV/VVELOX/Net-LDAP-LDAPhash-1.0.3.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Net::LDAP::LDAPhash
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Net/LDAP/LDAPhash.pm blib/lib/Net/LDAP/LDAPhash.pm
Manifying blib/man3/Net::LDAP::LDAPhash.3
  VVELOX/Net-LDAP-LDAPhash-1.0.3.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Net::LDAP::LDAPhash 1.0.3, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ...... 
1..1
ok 1 - use Net::LDAP::LDAPhash;
ok
t/boilerplate.t .. 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Net/LDAP/LDAPhash.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod.t .......... 
1..1
ok 1 - POD test for blib/lib/Net/LDAP/LDAPhash.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=3, Tests=5,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.28 cusr  0.02 csys =  0.34 CPU)
Result: PASS
  VVELOX/Net-LDAP-LDAPhash-1.0.3.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Net-LDAP-LDAPhash" VERSION="1.0.3" DATE="2011-08-01">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Takes from a search and turns it into a hash.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="Net-LDAP-LDAPhash-1.0.3.tar.gz"/>
  <PROVIDE NAME="Net::LDAP::LDAPhash" VERSION="1.000003"/>
  <REQUIRE NAME="Net::LDAP"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df && tar cvf - Net-LDAP-LDAPhash-1.0.3.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/Net-LDAP-LDAPhash-1.0.3.tar.gz
Net-LDAP-LDAPhash-1.0.3.ppd
blib/
blib/man3/
blib/man3/Net::LDAP::LDAPhash.3
blib/lib/
blib/lib/Net/
blib/lib/Net/LDAP/
blib/lib/Net/LDAP/LDAPhash.pm
>>> mv /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/Net-LDAP-LDAPhash-1.0.3.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running test for module 'Net::LDAP::Makepath'
Running make for V/VV/VVELOX/Net-LDAP-Makepath-1.0.1.tar.gz
Prepending /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-Makepath-1.0.1.tar.gz ok
Net-LDAP-Makepath-1.0.1/
Net-LDAP-Makepath-1.0.1/t/
Net-LDAP-Makepath-1.0.1/lib/
Net-LDAP-Makepath-1.0.1/Changes
Net-LDAP-Makepath-1.0.1/.cvsignore
Net-LDAP-Makepath-1.0.1/README
Net-LDAP-Makepath-1.0.1/MANIFEST
Net-LDAP-Makepath-1.0.1/Makefile.PL
Net-LDAP-Makepath-1.0.1/lib/Net/
Net-LDAP-Makepath-1.0.1/lib/Net/LDAP/
Net-LDAP-Makepath-1.0.1/lib/Net/LDAP/Makepath.pm
Net-LDAP-Makepath-1.0.1/t/boilerplate.t
Net-LDAP-Makepath-1.0.1/t/pod.t
Net-LDAP-Makepath-1.0.1/t/pod-coverage.t
Net-LDAP-Makepath-1.0.1/t/00-load.t
Prepending /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building V/VV/VVELOX/Net-LDAP-Makepath-1.0.1.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Net::LDAP::Makepath
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Net/LDAP/Makepath.pm blib/lib/Net/LDAP/Makepath.pm
Manifying blib/man3/Net::LDAP::Makepath.3
  VVELOX/Net-LDAP-Makepath-1.0.1.tar.gz
  make -- OK
Prepending /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Net::LDAP::Makepath 1.0.1, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use Net::LDAP::Makepath;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Net/LDAP/Makepath.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on Net::LDAP::Makepath
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/Net/LDAP/Makepath.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  1 wallclock secs ( 0.03 usr  0.01 sys +  0.41 cusr  0.03 csys =  0.48 CPU)
Result: PASS
  VVELOX/Net-LDAP-Makepath-1.0.1.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Net-LDAP-Makepath" VERSION="1.0.1" DATE="2010-06-26">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Provides a methode for creating paths in LDAP simply.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="Net-LDAP-Makepath-1.0.1.tar.gz"/>
  <PROVIDE NAME="Net::LDAP::Makepath" VERSION="1.000001"/>
  <REQUIRE NAME="Net::LDAP::Entry"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj && tar cvf - Net-LDAP-Makepath-1.0.1.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/Net-LDAP-Makepath-1.0.1.tar.gz
Net-LDAP-Makepath-1.0.1.ppd
blib/
blib/man3/
blib/man3/Net::LDAP::Makepath.3
blib/lib/
blib/lib/Net/
blib/lib/Net/LDAP/
blib/lib/Net/LDAP/Makepath.pm
>>> mv /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/Net-LDAP-Makepath-1.0.1.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running test for module 'Net::LDAP::AutoDNs'
Running make for V/VV/VVELOX/Net-LDAP-AutoDNs-0.2.2.tar.gz
Prepending /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-AutoDNs-0.2.2.tar.gz ok
Net-LDAP-AutoDNs-0.2.2/
Net-LDAP-AutoDNs-0.2.2/t/
Net-LDAP-AutoDNs-0.2.2/lib/
Net-LDAP-AutoDNs-0.2.2/Changes
Net-LDAP-AutoDNs-0.2.2/.cvsignore
Net-LDAP-AutoDNs-0.2.2/README
Net-LDAP-AutoDNs-0.2.2/MANIFEST
Net-LDAP-AutoDNs-0.2.2/Makefile.PL
Net-LDAP-AutoDNs-0.2.2/lib/Net/
Net-LDAP-AutoDNs-0.2.2/lib/Net/LDAP/
Net-LDAP-AutoDNs-0.2.2/lib/Net/LDAP/AutoDNs.pm
Net-LDAP-AutoDNs-0.2.2/t/boilerplate.t
Net-LDAP-AutoDNs-0.2.2/t/pod.t
Net-LDAP-AutoDNs-0.2.2/t/pod-coverage.t
Net-LDAP-AutoDNs-0.2.2/t/00-load.t
Prepending /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building V/VV/VVELOX/Net-LDAP-AutoDNs-0.2.2.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Net::LDAP::AutoDNs
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Net/LDAP/AutoDNs.pm blib/lib/Net/LDAP/AutoDNs.pm
Manifying blib/man3/Net::LDAP::AutoDNs.3
  VVELOX/Net-LDAP-AutoDNs-0.2.2.tar.gz
  make -- OK
Prepending /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Net::LDAP::AutoDNs 0.2.2, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use Net::LDAP::AutoDNs;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Net/LDAP/AutoDNs.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on Net::LDAP::AutoDNs
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/Net/LDAP/AutoDNs.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.04 usr  0.01 sys +  0.26 cusr  0.03 csys =  0.34 CPU)
Result: PASS
  VVELOX/Net-LDAP-AutoDNs-0.2.2.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Net-LDAP-AutoDNs" VERSION="0.2.2" DATE="2010-06-26">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Automatically make some default decisions some LDAP DNs and scopes.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="Net-LDAP-AutoDNs-0.2.2.tar.gz"/>
  <PROVIDE NAME="Net::LDAP::AutoDNs" VERSION="0.002002"/>
  <REQUIRE NAME="Sys::Hostname"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn && tar cvf - Net-LDAP-AutoDNs-0.2.2.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/Net-LDAP-AutoDNs-0.2.2.tar.gz
Net-LDAP-AutoDNs-0.2.2.ppd
blib/
blib/man3/
blib/man3/Net::LDAP::AutoDNs.3
blib/lib/
blib/lib/Net/
blib/lib/Net/LDAP/
blib/lib/Net/LDAP/AutoDNs.pm
>>> mv /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/Net-LDAP-AutoDNs-0.2.2.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running test for module 'Chooser'
Running make for V/VV/VVELOX/Chooser-2.0.0.tar.gz
Prepending /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Chooser-2.0.0.tar.gz ok
Chooser-2.0.0/
Chooser-2.0.0/lib/
Chooser-2.0.0/bin/
Chooser-2.0.0/t/
Chooser-2.0.0/.cvsignore
Chooser-2.0.0/README
Chooser-2.0.0/MANIFEST
Chooser-2.0.0/Makefile.PL
Chooser-2.0.0/Changes
Chooser-2.0.0/t/boilerplate.t
Chooser-2.0.0/t/pod.t
Chooser-2.0.0/t/00-load.t
Chooser-2.0.0/bin/chooser
Chooser-2.0.0/lib/Chooser.pm
Prepending /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building V/VV/VVELOX/Chooser-2.0.0.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Chooser
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Chooser.pm blib/lib/Chooser.pm
Manifying blib/man3/Chooser.3
  VVELOX/Chooser-2.0.0.tar.gz
  make -- OK
Prepending /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Chooser 2.0.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ...... 
1..1
ok 1 - use Chooser;
ok
t/boilerplate.t .. 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Chooser.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod.t .......... 
1..1
ok 1 - POD test for blib/lib/Chooser.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=3, Tests=5,  0 wallclock secs ( 0.04 usr  0.01 sys +  0.26 cusr  0.03 csys =  0.34 CPU)
Result: PASS
  VVELOX/Chooser-2.0.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Chooser" VERSION="2.0.0" DATE="2009-11-26">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>A system for choosing a value for something. Takes a string composed of various tests, arguements, and etc and returns a value based on it.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="Chooser-2.0.0.tar.gz"/>
  <PROVIDE NAME="Chooser::" VERSION="2.000000"/>
  <REQUIRE NAME="IO::Socket::SSL"/>
  <REQUIRE NAME="Sys::Hostname"/>
  <REQUIRE NAME="Test::More"/>
  <REQUIRE NAME="Text::NeatTemplate"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw && tar cvf - Chooser-2.0.0.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/Chooser-2.0.0.tar.gz
Chooser-2.0.0.ppd
blib/
blib/man3/
blib/man3/Chooser.3
blib/lib/
blib/lib/Chooser.pm
>>> mv /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/Chooser-2.0.0.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running test for module 'Net::LDAP::AutoServer'
Running make for V/VV/VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz
Prepending /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz ok
Net-LDAP-AutoServer-0.2.1/
Net-LDAP-AutoServer-0.2.1/t/
Net-LDAP-AutoServer-0.2.1/lib/
Net-LDAP-AutoServer-0.2.1/Changes
Net-LDAP-AutoServer-0.2.1/.cvsignore
Net-LDAP-AutoServer-0.2.1/README
Net-LDAP-AutoServer-0.2.1/MANIFEST
Net-LDAP-AutoServer-0.2.1/Makefile.PL
Net-LDAP-AutoServer-0.2.1/lib/Net/
Net-LDAP-AutoServer-0.2.1/lib/Net/LDAP/
Net-LDAP-AutoServer-0.2.1/lib/Net/LDAP/AutoServer.pm
Net-LDAP-AutoServer-0.2.1/t/boilerplate.t
Net-LDAP-AutoServer-0.2.1/t/pod.t
Net-LDAP-AutoServer-0.2.1/t/pod-coverage.t
Net-LDAP-AutoServer-0.2.1/t/00-load.t
Prepending /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building V/VV/VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Warning: prerequisite Net::DNS::RR::SRV::Helper 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for Net::LDAP::AutoServer
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
----  VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz ----
    Net::DNS::RR::SRV::Helper [requires]
Prepending /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'test'
Running make test
  Delayed until after prerequisites
Running test for module 'Net::DNS::RR::SRV::Helper'
Running make for V/VV/VVELOX/Net-DNS-RR-SRV-Helper-0.0.0.tar.gz
Prepending /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-DNS-RR-SRV-Helper-0.0.0.tar.gz ok
Net-DNS-RR-SRV-Helper-0.0.0/
Net-DNS-RR-SRV-Helper-0.0.0/lib/
Net-DNS-RR-SRV-Helper-0.0.0/t/
Net-DNS-RR-SRV-Helper-0.0.0/Makefile.PL
Net-DNS-RR-SRV-Helper-0.0.0/Changes
Net-DNS-RR-SRV-Helper-0.0.0/README
Net-DNS-RR-SRV-Helper-0.0.0/MANIFEST
Net-DNS-RR-SRV-Helper-0.0.0/.cvsignore
Net-DNS-RR-SRV-Helper-0.0.0/t/pod-coverage.t
Net-DNS-RR-SRV-Helper-0.0.0/t/pod.t
Net-DNS-RR-SRV-Helper-0.0.0/t/boilerplate.t
Net-DNS-RR-SRV-Helper-0.0.0/t/00-load.t
Net-DNS-RR-SRV-Helper-0.0.0/lib/Net/
Net-DNS-RR-SRV-Helper-0.0.0/lib/Net/DNS/
Net-DNS-RR-SRV-Helper-0.0.0/lib/Net/DNS/RR/
Net-DNS-RR-SRV-Helper-0.0.0/lib/Net/DNS/RR/SRV/
Net-DNS-RR-SRV-Helper-0.0.0/lib/Net/DNS/RR/SRV/Helper.pm
Prepending /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building V/VV/VVELOX/Net-DNS-RR-SRV-Helper-0.0.0.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Net::DNS::RR::SRV::Helper
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/Net/DNS/RR/SRV/Helper.pm blib/lib/Net/DNS/RR/SRV/Helper.pm
Manifying blib/man3/Net::DNS::RR::SRV::Helper.3
  VVELOX/Net-DNS-RR-SRV-Helper-0.0.0.tar.gz
  make -- OK
Prepending /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Net::DNS::RR::SRV::Helper 0.0.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use Net::DNS::RR::SRV::Helper;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Net/DNS/RR/SRV/Helper.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on Net::DNS::RR::SRV::Helper
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/Net/DNS/RR/SRV/Helper.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.26 cusr  0.04 csys =  0.34 CPU)
Result: PASS
  VVELOX/Net-DNS-RR-SRV-Helper-0.0.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Net-DNS-RR-SRV-Helper" VERSION="0.0.0" DATE="2010-02-14">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Orders SRV records by priority and weight for Net::DNS.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="Net-DNS-RR-SRV-Helper-0.0.0.tar.gz"/>
  <PROVIDE NAME="Net::DNS::RR::SRV::Helper" VERSION="0.000000"/>
  <REQUIRE NAME="Net::DNS::RR::SRV"/>
  <REQUIRE NAME="Sort::Naturally"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm && tar cvf - Net-DNS-RR-SRV-Helper-0.0.0.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/Net-DNS-RR-SRV-Helper-0.0.0.tar.gz
Net-DNS-RR-SRV-Helper-0.0.0.ppd
blib/
blib/man3/
blib/man3/Net::DNS::RR::SRV::Helper.3
blib/lib/
blib/lib/Net/
blib/lib/Net/DNS/
blib/lib/Net/DNS/RR/
blib/lib/Net/DNS/RR/SRV/
blib/lib/Net/DNS/RR/SRV/Helper.pm
>>> mv /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/Net-DNS-RR-SRV-Helper-0.0.0.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running make for V/VV/VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz
Prepending /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/fly1800/var/cpan/build/Net-LDAP-AutoServer-0.2.1-8wmPh8
Prepending /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Building V/VV/VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz

>>> make
cp lib/Net/LDAP/AutoServer.pm blib/lib/Net/LDAP/AutoServer.pm
Manifying blib/man3/Net::LDAP::AutoServer.3
  VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz
  make -- OK
Prepending /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch /home/fly1800/var/cpan/build/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/arch /home/fly1800/var/cpan/build/Chooser-2.0.0-bfjZvw/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch /home/fly1800/var/cpan/build/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
overload arg '..' is invalid at /home/fly1800/var/megalib/Math/BigInt.pm line 153.
# Testing Net::LDAP::AutoServer 0.2.1, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use Net::LDAP::AutoServer;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/Net/LDAP/AutoServer.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
overload arg '..' is invalid at /home/fly1800/var/megalib/Math/BigInt.pm line 153.
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on Net::LDAP::AutoServer
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/Net/LDAP/AutoServer.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  1 wallclock secs ( 0.03 usr  0.01 sys +  0.81 cusr  0.09 csys =  0.94 CPU)
Result: PASS
  VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Net-LDAP-AutoServer" VERSION="0.2.1" DATE="2010-06-26">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>Automated LDAP server choosing.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="Net-LDAP-AutoServer-0.2.1.tar.gz"/>
  <PROVIDE NAME="Net::LDAP::AutoServer" VERSION="0.002001"/>
  <REQUIRE NAME="Net::DNS"/>
  <REQUIRE NAME="Net::DNS::RR::SRV::Helper"/>
  <REQUIRE NAME="Net::LDAP"/>
  <REQUIRE NAME="Sys::Hostname"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/Net-LDAP-AutoServer-0.2.1-8wmPh8 && tar cvf - Net-LDAP-AutoServer-0.2.1.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/Net-LDAP-AutoServer-0.2.1.tar.gz
Net-LDAP-AutoServer-0.2.1.ppd
blib/
blib/man3/
blib/man3/Net::LDAP::AutoServer.3
blib/lib/
blib/lib/Net/
blib/lib/Net/LDAP/
blib/lib/Net/LDAP/AutoServer.pm
>>> mv /home/fly1800/var/cpan/build/Net-LDAP-AutoServer-0.2.1-8wmPh8/Net-LDAP-AutoServer-0.2.1.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running test for module 'ZML'
Running make for V/VV/VVELOX/ZML-1.0.0.tar.gz
Prepending %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'get'
Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZML-1.0.0.tar.gz ok
ZML-1.0.0/
ZML-1.0.0/t/
ZML-1.0.0/lib/
ZML-1.0.0/MANIFEST
ZML-1.0.0/Makefile.PL
ZML-1.0.0/Changes
ZML-1.0.0/.cvsignore
ZML-1.0.0/README
ZML-1.0.0/lib/ZML.pm
ZML-1.0.0/t/boilerplate.t
ZML-1.0.0/t/pod.t
ZML-1.0.0/t/pod-coverage.t
ZML-1.0.0/t/00-load.t
Prepending %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'make'

  CPAN.pm: Building V/VV/VVELOX/ZML-1.0.0.tar.gz

>>> /home/fly1800/ap1800-297235/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for ZML
Writing MYMETA.yml and MYMETA.json
>>> make
cp lib/ZML.pm blib/lib/ZML.pm
Manifying blib/man3/ZML.3
  VVELOX/ZML-1.0.0.tar.gz
  make -- OK
Prepending %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing ZML 1.0.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use ZML;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/ZML.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on ZML
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/ZML.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  0 wallclock secs ( 0.04 usr  0.00 sys +  0.31 cusr  0.04 csys =  0.39 CPU)
Result: PASS
  VVELOX/ZML-1.0.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="ZML" VERSION="1.0.0" DATE="2012-05-25">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>A simple, fast, and easy to read binary data storage format.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="ZML-1.0.0.tar.gz"/>
  <PROVIDE NAME="ZML::" VERSION="1.000000"/>
  <REQUIRE NAME="Error::Helper"/>
  <REQUIRE NAME="Test::More"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/ZML-1.0.0-i43lFx && tar cvf - ZML-1.0.0.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/ZML-1.0.0.tar.gz
ZML-1.0.0.ppd
blib/
blib/man3/
blib/man3/ZML.3
blib/lib/
blib/lib/ZML.pm
>>> mv /home/fly1800/var/cpan/build/ZML-1.0.0-i43lFx/ZML-1.0.0.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running make for V/VV/VVELOX/ZConf-6.1.0.tar.gz
Prepending %BUILDDIR%/ZML-1.0.0-i43lFx/blib/arch %BUILDDIR%/ZML-1.0.0-i43lFx/blib/lib %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'get'
  Has already been unwrapped into directory /home/fly1800/var/cpan/build/ZConf-6.1.0-PdBV0V
Prepending %BUILDDIR%/ZML-1.0.0-i43lFx/blib/arch %BUILDDIR%/ZML-1.0.0-i43lFx/blib/lib %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'make'

  CPAN.pm: Building V/VV/VVELOX/ZConf-6.1.0.tar.gz

>>> make
cp lib/ZConf.pm blib/lib/ZConf.pm
cp lib/ZConf/backends/file.pm blib/lib/ZConf/backends/file.pm
cp lib/ZConf/backends/ldap.pm blib/lib/ZConf/backends/ldap.pm
Manifying blib/man3/ZConf.3
Manifying blib/man3/ZConf::backends::file.3
Manifying blib/man3/ZConf::backends::ldap.3
  VVELOX/ZConf-6.1.0.tar.gz
  make -- OK
Prepending %BUILDDIR%/ZML-1.0.0-i43lFx/blib/arch %BUILDDIR%/ZML-1.0.0-i43lFx/blib/lib %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing ZConf 6.1.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use ZConf;
ok
overload arg '..' is invalid at /home/fly1800/var/megalib/Math/BigInt.pm line 153.
# Testing ZConf::backends::ldap 0.1.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/01-load.t ....... 
1..1
ok 1 - use ZConf::backends::ldap;
ok
# Testing ZConf::backends::file 2.1.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/02-load.t ....... 
1..1
ok 1 - use ZConf::backends::file;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/ZConf.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
overload arg '..' is invalid at /home/fly1800/var/megalib/Math/BigInt.pm line 153.
t/pod-coverage.t .. 
1..3
ok 1 - Pod coverage on ZConf
ok 2 - Pod coverage on ZConf::backends::ldap
ok 3 - Pod coverage on ZConf::backends::file
ok
t/pod.t ........... 
1..3
ok 1 - POD test for blib/lib/ZConf.pm
ok 2 - POD test for blib/lib/ZConf/backends/ldap.pm
ok 3 - POD test for blib/lib/ZConf/backends/file.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=6, Tests=12,  1 wallclock secs ( 0.04 usr  0.01 sys +  1.58 cusr  0.18 csys =  1.81 CPU)
Result: PASS
  VVELOX/ZConf-6.1.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="ZConf" VERSION="6.1.0" DATE="2012-05-25">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>A configuration system allowing for either file or LDAP backed storage.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="ZConf-6.1.0.tar.gz"/>
  <PROVIDE NAME="ZConf::" VERSION="6.001000"/>
  <PROVIDE NAME="ZConf::backends::ldap" VERSION="0.001000"/>
  <PROVIDE NAME="ZConf::backends::file" VERSION="2.001000"/>
  <REQUIRE NAME="Chooser::"/>
  <REQUIRE NAME="Error::Helper"/>
  <REQUIRE NAME="File::BaseDir"/>
  <REQUIRE NAME="File::Path"/>
  <REQUIRE NAME="Module::List"/>
  <REQUIRE NAME="Net::LDAP"/>
  <REQUIRE NAME="Net::LDAP::AutoDNs"/>
  <REQUIRE NAME="Net::LDAP::AutoServer"/>
  <REQUIRE NAME="Net::LDAP::LDAPhash"/>
  <REQUIRE NAME="Net::LDAP::Makepath"/>
  <REQUIRE NAME="Sys::Hostname"/>
  <REQUIRE NAME="Test::More"/>
  <REQUIRE NAME="ZML::"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/ZConf-6.1.0-PdBV0V && tar cvf - ZConf-6.1.0.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/ZConf-6.1.0.tar.gz
ZConf-6.1.0.ppd
blib/
blib/man3/
blib/man3/ZConf::backends::ldap.3
blib/man3/ZConf::backends::file.3
blib/man3/ZConf.3
blib/lib/
blib/lib/ZConf/
blib/lib/ZConf/backends/
blib/lib/ZConf/backends/ldap.pm
blib/lib/ZConf/backends/file.pm
blib/lib/ZConf.pm
>>> mv /home/fly1800/var/cpan/build/ZConf-6.1.0-PdBV0V/ZConf-6.1.0.ppd /home/fly1800/var/REPO/V/VV/VVELOX
Running make for V/VV/VVELOX/ZConf-GUI-1.1.0.tar.gz
Prepending %BUILDDIR%/ZConf-6.1.0-PdBV0V/blib/arch %BUILDDIR%/ZConf-6.1.0-PdBV0V/blib/lib %BUILDDIR%/ZML-1.0.0-i43lFx/blib/arch %BUILDDIR%/ZML-1.0.0-i43lFx/blib/lib %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'get'
  Has already been unwrapped into directory /home/fly1800/var/cpan/build/ZConf-GUI-1.1.0-gHe3se
Prepending %BUILDDIR%/ZConf-6.1.0-PdBV0V/blib/arch %BUILDDIR%/ZConf-6.1.0-PdBV0V/blib/lib %BUILDDIR%/ZML-1.0.0-i43lFx/blib/arch %BUILDDIR%/ZML-1.0.0-i43lFx/blib/lib %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'make'

  CPAN.pm: Building V/VV/VVELOX/ZConf-GUI-1.1.0.tar.gz

>>> make
cp lib/ZConf/GUI.pm blib/lib/ZConf/GUI.pm
Manifying blib/man3/ZConf::GUI.3
  VVELOX/ZConf-GUI-1.1.0.tar.gz
  make -- OK
Prepending %BUILDDIR%/ZConf-6.1.0-PdBV0V/blib/arch %BUILDDIR%/ZConf-6.1.0-PdBV0V/blib/lib %BUILDDIR%/ZML-1.0.0-i43lFx/blib/arch %BUILDDIR%/ZML-1.0.0-i43lFx/blib/lib %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/arch %BUILDDIR%/Net-LDAP-AutoServer-0.2.1-8wmPh8/blib/lib %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/arch %BUILDDIR%/Net-DNS-RR-SRV-Helper-0.0.0-wmmxNm/blib/lib %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/arch %BUILDDIR%/Chooser-2.0.0-bfjZvw/blib/lib %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/arch %BUILDDIR%/Net-LDAP-AutoDNs-0.2.2-F30lfn/blib/lib %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/arch %BUILDDIR%/Net-LDAP-Makepath-1.0.1-ZDOwbj/blib/lib %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/arch %BUILDDIR%/Net-LDAP-LDAPhash-1.0.3-GGU0Df/blib/lib to PERL5LIB; %BUILDDIR%=/home/fly1800/var/cpan/build for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 /home/fly1800/ap1800-297235/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing ZConf::GUI 1.1.0, Perl 5.018000, /home/fly1800/ap1800-297235/bin/perl-static
t/00-load.t ....... 
1..1
ok 1 - use ZConf::GUI;
ok
t/boilerplate.t ... 
1..3
ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text
ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text
ok 3 - lib/ZConf/GUI.pm contains no boilerplate text # TODO Need to replace the boilerplate text
ok
t/pod-coverage.t .. 
1..1
ok 1 - Pod coverage on ZConf::GUI
ok
t/pod.t ........... 
1..1
ok 1 - POD test for blib/lib/ZConf/GUI.pm
ok
All tests successful.

Test Summary Report
-------------------
t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0)
  TODO passed:   1-3
Files=4, Tests=6,  1 wallclock secs ( 0.04 usr  0.01 sys +  0.57 cusr  0.07 csys =  0.69 CPU)
Result: PASS
  VVELOX/ZConf-GUI-1.1.0.tar.gz
  make test TEST_VERBOSE=1 -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="ZConf-GUI" VERSION="1.1.0" DATE="2012-07-27">
  <AUTHOR CPAN="VVELOX">Zane C. Bowers-Hadley &lt;vvelox@vvelox.net></AUTHOR>
  <ABSTRACT>A GUI backend chooser.</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-64int-5.18"/>
  <CODEBASE HREF="ZConf-GUI-1.1.0.tar.gz"/>
  <PROVIDE NAME="ZConf::GUI" VERSION="1.001000"/>
  <REQUIRE NAME="Module::List"/>
  <REQUIRE NAME="Test::More"/>
  <REQUIRE NAME="ZConf::"/>
  <!-- Built 2013-06-17 with ActivePerl-1800 on perl-centos5-32 (CentOS release 5.3 (Final), glibc 2.5 stable) -->
</SOFTPKG>
>>> (cd /home/fly1800/var/cpan/build/ZConf-GUI-1.1.0-gHe3se && tar cvf - ZConf-GUI-1.1.0.ppd blib) | gzip -c >/home/fly1800/var/REPO/V/VV/VVELOX/ZConf-GUI-1.1.0.tar.gz
ZConf-GUI-1.1.0.ppd
blib/
blib/man3/
blib/man3/ZConf::GUI.3
blib/lib/
blib/lib/ZConf/
blib/lib/ZConf/GUI.pm
>>> mv /home/fly1800/var/cpan/build/ZConf-GUI-1.1.0-gHe3se/ZConf-GUI-1.1.0.ppd /home/fly1800/var/REPO/V/VV/VVELOX
VmSize:	  132956 kB
Finished 2013-06-17T08:27:06