Start 2008-06-19T07:02:23
Going to read /home/cpanfly/var/cpan/Metadata
  Database was generated on Thu, 19 Jun 2008 09:03:12 GMT
Running make for C/CF/CFEDDE/POE-Component-Cron-0.019.tar.gz
Checksum for /net/nas/data/cpan/authors/id/C/CF/CFEDDE/POE-Component-Cron-0.019.tar.gz ok
POE-Component-Cron-0.019/
POE-Component-Cron-0.019/lib/
POE-Component-Cron-0.019/lib/POE/
POE-Component-Cron-0.019/lib/POE/Component/
POE-Component-Cron-0.019/lib/POE/Component/Cron.pm
POE-Component-Cron-0.019/t/
POE-Component-Cron-0.019/t/POE-Component-Cron.t
POE-Component-Cron-0.019/Changes
POE-Component-Cron-0.019/README
POE-Component-Cron-0.019/MANIFEST
POE-Component-Cron-0.019/Makefile.PL
POE-Component-Cron-0.019/META.yml

  CPAN.pm: Going to build C/CF/CFEDDE/POE-Component-Cron-0.019.tar.gz

Warning: prerequisite DateTime::Event::Cron 0 not found.
Warning: prerequisite DateTime::Event::Random 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for POE::Component::Cron
---- Unsatisfied dependencies detected during ----
----  CFEDDE/POE-Component-Cron-0.019.tar.gz  ----
    DateTime::Event::Cron [requires]
    DateTime::Event::Random [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'DateTime::Event::Cron'
Running make for M/MS/MSISK/DateTime-Event-Cron-0.07.tar.gz
Checksum for /net/nas/data/cpan/authors/id/M/MS/MSISK/DateTime-Event-Cron-0.07.tar.gz ok
DateTime-Event-Cron-0.07/
DateTime-Event-Cron-0.07/t/
DateTime-Event-Cron-0.07/t/leapyear.t
DateTime-Event-Cron-0.07/t/basic.t
DateTime-Event-Cron-0.07/t/crontab.t
DateTime-Event-Cron-0.07/t/malformed.t
DateTime-Event-Cron-0.07/t/cascade.t
DateTime-Event-Cron-0.07/t/cron.t
DateTime-Event-Cron-0.07/Makefile.PL
DateTime-Event-Cron-0.07/lib/
DateTime-Event-Cron-0.07/lib/DateTime/
DateTime-Event-Cron-0.07/lib/DateTime/Event/
DateTime-Event-Cron-0.07/lib/DateTime/Event/Cron.pm
DateTime-Event-Cron-0.07/MANIFEST
DateTime-Event-Cron-0.07/Changes
DateTime-Event-Cron-0.07/README

  CPAN.pm: Going to build M/MS/MSISK/DateTime-Event-Cron-0.07.tar.gz

Warning: prerequisite Set::Crontab 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for DateTime::Event::Cron
---- Unsatisfied dependencies detected during ----
----   MSISK/DateTime-Event-Cron-0.07.tar.gz  ----
    Set::Crontab [requires]
Running make test
  Delayed until after prerequisites
Running test for module 'Set::Crontab'
Running make for A/AM/AMS/Set-Crontab-1.00.tar.gz
Checksum for /net/nas/data/cpan/authors/id/A/AM/AMS/Set-Crontab-1.00.tar.gz ok
Set-Crontab-1.00/
Set-Crontab-1.00/Makefile.PL
Set-Crontab-1.00/Changes
Set-Crontab-1.00/test.pl
Set-Crontab-1.00/Crontab.pm
Set-Crontab-1.00/README
Set-Crontab-1.00/MANIFEST

  CPAN.pm: Going to build A/AM/AMS/Set-Crontab-1.00.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for Set::Crontab
cp Crontab.pm blib/lib/Set/Crontab.pm
Manifying blib/man3/Set::Crontab.3
  AMS/Set-Crontab-1.00.tar.gz
  make -- OK
Running make test
PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-Iblib/lib" "-Iblib/arch" test.pl
1..11
# Running under perl version 5.010000 for linux
# Current time local: Thu Jun 19 07:02:25 2008
# Current time GMT:   Thu Jun 19 14:02:25 2008
# Using Test.pm version 1.25
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
  AMS/Set-Crontab-1.00.tar.gz
  make test -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="Set-Crontab" VERSION="1.00" DATE="2001-04-30">
  <AUTHOR CPAN="AMS">Abhijit Menon-Sen &lt;ams@wiw.org></AUTHOR>
  <ABSTRACT>Expand crontab(5)-style integer lists</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.10"/>
  <CODEBASE HREF="Set-Crontab-1.00.tar.gz"/>
  <PROVIDE NAME="Set::Crontab" VERSION="1.00"/>
  <!-- Built 2008-06-19 with ActivePerl-1003 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) -->
</SOFTPKG>
>>> (cd /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06 && tar cf - Set-Crontab-1.00.ppd blib) | gzip -c >/home/cpanfly/var/REPO/A/AM/AMS/Set-Crontab-1.00.tar.gz
>>> mv /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/Set-Crontab-1.00.ppd /home/cpanfly/var/REPO/A/AM/AMS
Running make for M/MS/MSISK/DateTime-Event-Cron-0.07.tar.gz
Prepending /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl
Prepending /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Going to build M/MS/MSISK/DateTime-Event-Cron-0.07.tar.gz

cp lib/DateTime/Event/Cron.pm blib/lib/DateTime/Event/Cron.pm
Manifying blib/man3/DateTime::Event::Cron.3
  MSISK/DateTime-Event-Cron-0.07.tar.gz
  make -- OK
Prepending /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'test'
Running make test
PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/basic.t........ok
t/cascade.t......ok
t/cron.t.........ok
t/crontab.t......ok
t/leapyear.t.....ok
t/malformed.t....ok
All tests successful.
Files=6, Tests=161,  5 wallclock secs ( 0.01 usr  0.07 sys +  4.92 cusr  0.17 csys =  5.17 CPU)
Result: PASS
  MSISK/DateTime-Event-Cron-0.07.tar.gz
  make test -- OK
Picked up version from Makefile
Picked up distname from Makefile
Picked up abstract from Makefile
<SOFTPKG NAME="DateTime-Event-Cron" VERSION="0.07" DATE="2004-03-30">
  <AUTHOR CPAN="MSISK">Matt Sisk &lt;sisk@mojotoad.com></AUTHOR>
  <ABSTRACT>DateTime extension for generating recurrence</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.10"/>
  <CODEBASE HREF="DateTime-Event-Cron-0.07.tar.gz"/>
  <PROVIDE NAME="DateTime::Event::Cron" VERSION="0.07"/>
  <REQUIRE NAME="DateTime::" VERSION="0.21"/>
  <REQUIRE NAME="DateTime::Set" VERSION="0.1406"/>
  <REQUIRE NAME="Set::Crontab"/>
  <!-- Built 2008-06-19 with ActivePerl-1003 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) -->
</SOFTPKG>
>>> (cd /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl && tar cf - DateTime-Event-Cron-0.07.ppd blib) | gzip -c >/home/cpanfly/var/REPO/M/MS/MSISK/DateTime-Event-Cron-0.07.tar.gz
>>> mv /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/DateTime-Event-Cron-0.07.ppd /home/cpanfly/var/REPO/M/MS/MSISK
Running test for module 'DateTime::Event::Random'
Running make for F/FG/FGLOCK/DateTime-Event-Random-0.03.tar.gz
Prepending /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/lib /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'get'
Checksum for /net/nas/data/cpan/authors/id/F/FG/FGLOCK/DateTime-Event-Random-0.03.tar.gz ok
DateTime-Event-Random-0.03/
DateTime-Event-Random-0.03/META.yml
DateTime-Event-Random-0.03/t/
DateTime-Event-Random-0.03/t/03stress.t
DateTime-Event-Random-0.03/t/01sanity.t
DateTime-Event-Random-0.03/t/02cached.t
DateTime-Event-Random-0.03/t/00load.t
DateTime-Event-Random-0.03/Changes
DateTime-Event-Random-0.03/MANIFEST
DateTime-Event-Random-0.03/TODO
DateTime-Event-Random-0.03/MANIFEST.SKIP
DateTime-Event-Random-0.03/LICENSE
DateTime-Event-Random-0.03/Makefile.PL
DateTime-Event-Random-0.03/README
DateTime-Event-Random-0.03/lib/
DateTime-Event-Random-0.03/lib/DateTime/
DateTime-Event-Random-0.03/lib/DateTime/Event/
DateTime-Event-Random-0.03/lib/DateTime/Event/Random.pm
Prepending /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/lib /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Going to build F/FG/FGLOCK/DateTime-Event-Random-0.03.tar.gz

Checking if your kit is complete...
Looks good
Writing Makefile for DateTime::Event::Random
cp lib/DateTime/Event/Random.pm blib/lib/DateTime/Event/Random.pm
Manifying blib/man3/DateTime::Event::Random.3
  FGLOCK/DateTime-Event-Random-0.03.tar.gz
  make -- OK
Prepending /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/lib /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'test'
Running make test
PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00load.t......ok
t/01sanity.t....ok
t/02cached.t....ok
t/03stress.t....ok
All tests successful.
Files=4, Tests=22,  3 wallclock secs ( 0.00 usr  0.00 sys +  2.47 cusr  0.18 csys =  2.65 CPU)
Result: PASS
  FGLOCK/DateTime-Event-Random-0.03.tar.gz
  make test -- OK
Picked up abstract from Makefile
<SOFTPKG NAME="DateTime-Event-Random" VERSION="0.03" DATE="2004-03-17">
  <AUTHOR CPAN="FGLOCK">Flavio Soibelmann Glock &lt;fglock@gmail.com></AUTHOR>
  <ABSTRACT>set of random DateTimes</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.10"/>
  <CODEBASE HREF="DateTime-Event-Random-0.03.tar.gz"/>
  <PROVIDE NAME="DateTime::Event::Random" VERSION="0.03"/>
  <REQUIRE NAME="DateTime::"/>
  <REQUIRE NAME="DateTime::Set" VERSION="0.07"/>
  <!-- Built 2008-06-19 with ActivePerl-1003 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) -->
</SOFTPKG>
>>> (cd /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e && tar cf - DateTime-Event-Random-0.03.ppd blib) | gzip -c >/home/cpanfly/var/REPO/F/FG/FGLOCK/DateTime-Event-Random-0.03.tar.gz
>>> mv /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/DateTime-Event-Random-0.03.ppd /home/cpanfly/var/REPO/F/FG/FGLOCK
Running make for C/CF/CFEDDE/POE-Component-Cron-0.019.tar.gz
Prepending /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/blib/lib /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/lib /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'get'
  Has already been unwrapped into directory /home/cpanfly/var/cpan/build/POE-Component-Cron-0.019-oO64cW
Prepending /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/blib/lib /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/lib /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'make'

  CPAN.pm: Going to build C/CF/CFEDDE/POE-Component-Cron-0.019.tar.gz

cp lib/POE/Component/Cron.pm blib/lib/POE/Component/Cron.pm
Manifying blib/man3/POE::Component::Cron.3
  CFEDDE/POE-Component-Cron-0.019.tar.gz
  make -- OK
Prepending /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Random-0.03-lGxg3e/blib/lib /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/arch /home/cpanfly/var/cpan/build/DateTime-Event-Cron-0.07-FRl3Hl/blib/lib /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/arch /home/cpanfly/var/cpan/build/Set-Crontab-1.00-GufV06/blib/lib to PERL5LIB for 'test'
Running make test
PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/POE-Component-Cron.t....# This is going to take about two minutes
ok
All tests successful.
Files=1, Tests=89, 120 wallclock secs ( 0.00 usr  0.00 sys +  0.23 cusr  0.11 csys =  0.34 CPU)
Result: PASS
  CFEDDE/POE-Component-Cron-0.019.tar.gz
  make test -- OK
<SOFTPKG NAME="POE-Component-Cron" VERSION="0.019" DATE="2008-05-03">
  <AUTHOR CPAN="CFEDDE">Chris Fedde &lt;chris@fedde.us></AUTHOR>
  <ABSTRACT>Schedule POE Events using a cron spec</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.10"/>
  <CODEBASE HREF="POE-Component-Cron-0.019.tar.gz"/>
  <PROVIDE NAME="POE::Component::Cron" VERSION="0.019"/>
  <REQUIRE NAME="DateTime::"/>
  <REQUIRE NAME="DateTime::Event::Cron"/>
  <REQUIRE NAME="DateTime::Event::Random"/>
  <REQUIRE NAME="POE::"/>
  <!-- Built 2008-06-19 with ActivePerl-1003 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) -->
</SOFTPKG>
>>> (cd /home/cpanfly/var/cpan/build/POE-Component-Cron-0.019-oO64cW && tar cf - POE-Component-Cron-0.019.ppd blib) | gzip -c >/home/cpanfly/var/REPO/C/CF/CFEDDE/POE-Component-Cron-0.019.tar.gz
>>> mv /home/cpanfly/var/cpan/build/POE-Component-Cron-0.019-oO64cW/POE-Component-Cron-0.019.ppd /home/cpanfly/var/REPO/C/CF/CFEDDE
Finished 2008-06-19T07:04:37