Start 2008-08-08T06:03:32 Going to read /home/cpanfly/var/cpan/Metadata Database was generated on Fri, 08 Aug 2008 10:02:52 GMT Running make for L/LB/LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz Checksum for /net/nas/data/cpan/authors/id/L/LB/LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz ok CPAN-Mini-Webserver-0.33/ CPAN-Mini-Webserver-0.33/bin/ CPAN-Mini-Webserver-0.33/bin/minicpan_webserver CPAN-Mini-Webserver-0.33/CHANGES CPAN-Mini-Webserver-0.33/META.yml CPAN-Mini-Webserver-0.33/t/ CPAN-Mini-Webserver-0.33/t/pod.t CPAN-Mini-Webserver-0.33/t/simple.t CPAN-Mini-Webserver-0.33/Makefile.PL CPAN-Mini-Webserver-0.33/README CPAN-Mini-Webserver-0.33/lib/ CPAN-Mini-Webserver-0.33/lib/CPAN/ CPAN-Mini-Webserver-0.33/lib/CPAN/Mini/ CPAN-Mini-Webserver-0.33/lib/CPAN/Mini/Webserver/ CPAN-Mini-Webserver-0.33/lib/CPAN/Mini/Webserver/Templates.pm CPAN-Mini-Webserver-0.33/lib/CPAN/Mini/Webserver.pm CPAN-Mini-Webserver-0.33/MANIFEST CPAN.pm: Going to build L/LB/LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Warning: prerequisite Perl6::Say 0 not found. Warning: prerequisite Template::Declare 0 not found. Checking if your kit is complete... Looks good Writing Makefile for CPAN::Mini::Webserver ---- Unsatisfied dependencies detected during ---- ---- LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz ---- Template::Declare [requires] Perl6::Say [requires] Running make test Delayed until after prerequisites Running test for module 'Template::Declare' Running make for S/SA/SARTAK/Template-Declare-0.29.tar.gz Checksum for /net/nas/data/cpan/authors/id/S/SA/SARTAK/Template-Declare-0.29.tar.gz ok Template-Declare-0.29/ Template-Declare-0.29/Changes Template-Declare-0.29/inc/ Template-Declare-0.29/inc/Module/ Template-Declare-0.29/inc/Module/Install/ Template-Declare-0.29/inc/Module/Install/Base.pm Template-Declare-0.29/inc/Module/Install/Can.pm Template-Declare-0.29/inc/Module/Install/Fetch.pm Template-Declare-0.29/inc/Module/Install/Makefile.pm Template-Declare-0.29/inc/Module/Install/Metadata.pm Template-Declare-0.29/inc/Module/Install/Win32.pm Template-Declare-0.29/inc/Module/Install/WriteAll.pm Template-Declare-0.29/inc/Module/Install.pm Template-Declare-0.29/lib/ Template-Declare-0.29/lib/Template/ Template-Declare-0.29/lib/Template/Declare/ Template-Declare-0.29/lib/Template/Declare/Buffer.pm Template-Declare-0.29/lib/Template/Declare/Tags.pm Template-Declare-0.29/lib/Template/Declare/TagSet/ Template-Declare-0.29/lib/Template/Declare/TagSet/HTML.pm Template-Declare-0.29/lib/Template/Declare/TagSet/RDF/ Template-Declare-0.29/lib/Template/Declare/TagSet/RDF/EM.pm Template-Declare-0.29/lib/Template/Declare/TagSet/RDF.pm Template-Declare-0.29/lib/Template/Declare/TagSet/XUL.pm Template-Declare-0.29/lib/Template/Declare/TagSet.pm Template-Declare-0.29/lib/Template/Declare.pm Template-Declare-0.29/Makefile.PL Template-Declare-0.29/MANIFEST Template-Declare-0.29/MANIFEST.SKIP Template-Declare-0.29/META.yml Template-Declare-0.29/README Template-Declare-0.29/SIGNATURE Template-Declare-0.29/t/ Template-Declare-0.29/t/99-pod-coverage.t Template-Declare-0.29/t/99-pod.t Template-Declare-0.29/t/aliasing.t Template-Declare-0.29/t/alternative.t Template-Declare-0.29/t/arg-declaration-styles.t Template-Declare-0.29/t/arg-passing.t Template-Declare-0.29/t/attributes.t Template-Declare-0.29/t/closures.t Template-Declare-0.29/t/deep_aliasing.t Template-Declare-0.29/t/deep_importing.t Template-Declare-0.29/t/duplicate_element_ids.t Template-Declare-0.29/t/forms.t Template-Declare-0.29/t/importing.t Template-Declare-0.29/t/indent.t Template-Declare-0.29/t/indexhtml.t Template-Declare-0.29/t/instrumentation.t Template-Declare-0.29/t/MyTagSet.pm Template-Declare-0.29/t/namespace.t Template-Declare-0.29/t/pitfalls.t Template-Declare-0.29/t/postprocessor.t Template-Declare-0.29/t/private.t Template-Declare-0.29/t/relative-aliasing.t Template-Declare-0.29/t/relative-pathing.t Template-Declare-0.29/t/rt-37622.t Template-Declare-0.29/t/self.t Template-Declare-0.29/t/siblings.t Template-Declare-0.29/t/similar-aliases.t Template-Declare-0.29/t/smart_tag_wrapper.t Template-Declare-0.29/t/subclassing.t Template-Declare-0.29/t/subtemplates.t Template-Declare-0.29/t/tag_sub_list.t Template-Declare-0.29/t/tagset_html.t Template-Declare-0.29/t/tagset_mix.t Template-Declare-0.29/t/tagset_rdf.t Template-Declare-0.29/t/tagset_rdf_em.t Template-Declare-0.29/t/tagset_xul.t Template-Declare-0.29/t/trivial.t Template-Declare-0.29/t/utf8.t Template-Declare-0.29/t/utils.pl Template-Declare-0.29/t/wrappers.t Template-Declare-0.29/t/xss.t CPAN.pm: Going to build S/SA/SARTAK/Template-Declare-0.29.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Template::Declare >>> make cp lib/Template/Declare/Tags.pm blib/lib/Template/Declare/Tags.pm cp lib/Template/Declare/TagSet/XUL.pm blib/lib/Template/Declare/TagSet/XUL.pm cp lib/Template/Declare.pm blib/lib/Template/Declare.pm cp lib/Template/Declare/TagSet/RDF.pm blib/lib/Template/Declare/TagSet/RDF.pm cp lib/Template/Declare/Buffer.pm blib/lib/Template/Declare/Buffer.pm cp lib/Template/Declare/TagSet/HTML.pm blib/lib/Template/Declare/TagSet/HTML.pm cp lib/Template/Declare/TagSet/RDF/EM.pm blib/lib/Template/Declare/TagSet/RDF/EM.pm cp lib/Template/Declare/TagSet.pm blib/lib/Template/Declare/TagSet.pm Manifying blib/man3/Template::Declare::Tags.3 Manifying blib/man3/Template::Declare.3 Manifying blib/man3/Template::Declare::TagSet::XUL.3 Manifying blib/man3/Template::Declare::TagSet::RDF.3 Manifying blib/man3/Template::Declare::TagSet::RDF::EM.3 Manifying blib/man3/Template::Declare::TagSet::HTML.3 Manifying blib/man3/Template::Declare::Buffer.3 Manifying blib/man3/Template::Declare::TagSet.3 SARTAK/Template-Declare-0.29.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/99-pod-coverage........... 1..0 # Skip We know we don't have enough POD :( skipped: We know we don't have enough POD :( t/99-pod.................... 1..8 ok 1 - blib/lib/Template/Declare.pm ok 2 - blib/lib/Template/Declare/Tags.pm ok 3 - blib/lib/Template/Declare/Buffer.pm ok 4 - blib/lib/Template/Declare/TagSet.pm ok 5 - blib/lib/Template/Declare/TagSet/RDF.pm ok 6 - blib/lib/Template/Declare/TagSet/XUL.pm ok 7 - blib/lib/Template/Declare/TagSet/HTML.pm ok 8 - blib/lib/Template/Declare/TagSet/RDF/EM.pm ok t/aliasing.................. 1..16 ok 1 ok 2 ok 3 ok 4 ok 5 - When you subclass and then alias, the superclass's aliass are there ok 6 ok 7 - The variable was set ok 8 - $self is correct in template block ok 9 - Lint checked clean ok 10 ok 11 - The variable was not set on second aliasing ok 12 - $self is correct in template block ok 13 - Lint checked clean ok 14 - We got the aliased version in the subclass ok 15 - $self is correct in template block ok 16 - Lint checked clean ok t/alternative............... 1..7 ok 1 - td is invalid ok 2 ok 3 - tr is invalid ok 4 ok 5 ok 6 ok 7 ok t/arg-declaration-styles.... 1..39 ok 1 - content ok 2 - content ok 3 - Lint checked clean ok 4 - content_curly ok 5 - content_curly ok 6 - Lint checked clean ok 7 - content_explicit ok 8 - content_explicit ok 9 - Lint checked clean ok 10 - content_mixed1 ok 11 - content_mixed1 ok 12 - content_mixed1 ok 13 - content_mixed1 ok 14 - content_mixed1 ok 15 - Lint checked clean ok 16 - content_mixed2 ok 17 - content_mixed2 ok 18 - content_mixed2 ok 19 - content_mixed2 ok 20 - content_mixed2 ok 21 - Lint checked clean ok 22 - content_attrs ok 23 - content_attrs ok 24 - content_attrs ok 25 - content_attrs ok 26 - content_attrs ok 27 - Lint checked clean ok 28 - content_withs ok 29 - content_withs ok 30 - content_withs ok 31 - content_withs ok 32 - content_withs ok 33 - Lint checked clean ok 34 - content_curlies ok 35 - content_curlies ok 36 - content_curlies ok 37 - content_curlies ok 38 - content_curlies ok 39 - Lint checked clean ok t/arg-passing............... 1..5 ok 1 ok 2 ok 3 ok 4 ok 5 ok t/attributes................ 1..10 ok 1 ok 2 - Lint checked clean ok 3 ok 4 - Lint checked clean ok 5 ok 6 - Lint checked clean ok 7 ok 8 - Lint checked clean ok 9 ok 10 - Lint checked clean ok t/closures.................. 1..16 ok 1 ok 2 - Lint checked clean ok 3 ok 4 - Lint checked clean ok 5 ok 6 - Lint checked clean ok 7 - closure_1 matched ok 8 - Lint checked clean ok 9 - closure_2 matched ok 10 - Lint checked clean ok 11 - closure_3 matched ok 12 - Lint checked clean ok 13 - Showed closure_5 ok 14 - Lint checked clean ok 15 ok 16 - Lint checked clean ok t/deep_aliasing............. 1..12 ok 1 ok 2 - the listing template isn't imported to the top level ok 3 - The search template isn't imported to the top level ok 4 - has listing template ok 5 - has search template ok 6 ok 7 - can not call a toplevel "listing" template ok 8 - listing is private ok 9 - Can not call a toplevel /search ok 10 - Search could not be found ok 11 - Can call /plugin/listing ok 12 - Can call /plugin/search ok t/deep_importing............ 1..12 ok 1 ok 2 ok 3 ok 4 - has listing template ok 5 - has search template ok 6 ok 7 - can not call a toplevel "listing" template ok 8 - calling a missing component gets warned ok 9 - Can call /plugin/listing ok 10 - Can not call a toplevel /search ok 11 - calling a missing component gets warned ok 12 - Can call /plugin/search ok t/duplicate_element_ids..... 1..8 ok 1 - Duplicate id should be warned ok 2 - Duplicate id should be warned ok 3 - Duplicate id given in different case should be warned ok 4 - Should not duplicate id warnings if there are none. ok 5 - Duplicate id should be warned ok 6 - Duplicate id should be warned ok 7 - Duplicate id given in different case should be warned ok 8 - Should not duplicate id warnings if there are none. ok t/forms..................... 1..2 ok 1 - we have a form ok 2 - Lint checked clean ok t/importing................. 1..12 ok 1 ok 2 ok 3 ok 4 - When you subclass and then import, the superclass's imports are there ok 5 ok 6 ok 7 ok 8 - $self is correct in template block ok 9 - Lint checked clean ok 10 - We got the imported version in the subclass ok 11 - $self is correct in template block ok 12 - Lint checked clean ok t/indent.................... 1..1 ok 1 ok t/indexhtml................. 1..4 ok 1 ok 2 - Lint checked clean ok 3 ok 4 - Lint checked clean ok t/instrumentation........... 1..32 ok 1 ok 2 - one template called ok 3 - first argument is $orig ok 4 - second argument is template path ok 5 - third argument is the list of arguments ok 6 - fourth argument is template coderef ok 7 ok 8 ok 9 - one pre_template called ok 10 - first argument is $orig ok 11 - nested templates ok 12 - nested templates) ok 13 - nested templates ok 14 - nested templates ok 15 - fourth argument is template coderef ok 16 - fourth argument is template coderef ok 17 ok 18 - one template called ok 19 - first argument is $orig ok 20 - second argument is template path ok 21 - third argument is the list of arguments ok 22 - fourth argument is template coderef ok 23 ok 24 - one template called ok 25 - first argument is $orig ok 26 - first argument is $orig ok 27 - second argument is template path ok 28 - second argument is template path ok 29 - third argument is the list of arguments ok 30 - third argument is the list of arguments ok 31 - fourth argument is template coderef ok 32 - fourth argument is template coderef ok t/namespace................. 1..5 ok 1 ok 2 - htm:: is invalid ok 3 - package htm is intact ok 4 ok 5 ok t/pitfalls.................. 1..7 ok 1 - attr in an invalid tag ok 2 - attr in an invalid tag ok 3 - semicolon required before for stmt ok 4 - error expected ok 5 ok 6 ok 7 - 'hello, ' is missing ok t/postprocessor............. 1..8 ok 1 - no postprocessing yet ok 2 - no postprocessing yet ok 3 - no postprocessing yet ok 4 - no postprocessing yet ok 5 - postprocessor transformed h1 { ... } ok 6 - postprocessor transformed outs ok 7 - postprocessor did NOT transform outs_raw ok 8 - attrs shouldn't be postprocessed ok t/private................... 1..14 ok 1 ok 2 ok 3 - Lint checked clean ok 4 - got warning ok 5 ok 6 - Lint checked clean ok 7 - got warning Use of uninitialized value $this in pattern match (m//) at t/private.t line 68. ok 8 Use of uninitialized value in subroutine entry at /home/cpanfly/var/megalib/HTML/Lint.pm line 107. ok 9 - Lint checked clean ok 10 - got warning ok 11 - Can't call private templates ok 12 - Lint checked clean ok 13 - got warning ok 14 ok t/relative-aliasing......... 1..12 ok 1 ok 2 - the listing template isn't imported to the top level ok 3 - The search template isn't imported to the top level ok 4 - has listing template ok 5 - has search template ok 6 ok 7 - can not call a toplevel "listing" template ok 8 - listing is private ok 9 - Can not call a toplevel /search ok 10 - Search could not be found ok 11 - Can call /plugin/listing ok 12 - Can call /plugin/search ok t/relative-pathing.......... 1..23 ok 1 ok 2 ok 3 ok 4 ok 5 - Correct package ok 6 ok 7 - Correct package ok 8 ok 9 - Correct package for aliased_pkg/relative ok 10 ok 11 - Correct package for aliased_pkg/relative_dot ok 12 ok 13 - Correct package for aliased_pkg/fullpath ok 14 ok 15 - Correct package for aliased_pkg/root ok 16 ok 17 - Correct package for aliased_pkg/parent ok 18 ok 19 - Correct package for relative ok 20 ok 21 - Correct package for relative_dot ok 22 ok 23 - Correct package for root ok t/rt-37622.................. 1..2 ok 1 ok 2 ok t/self...................... 1..3 ok 1 ok 2 - $self is correct in template block ok 3 - Lint checked clean ok t/siblings.................. 1..7 ok 1 - body after head ok 2 - Lint checked clean not ok 3 - show() after tag # TODO fixme # Failed (TODO) test 'show() after tag' # at t/siblings.t line 42. # ' # # #

heading

' # doesn't match '(?ms-xi:\A\s*' # doesn't match '(?ms-xi:text)' ok 7 - Lint checked clean ok t/similar-aliases........... 1..6 ok 1 - has a foo/list ok 2 - has an admin/foo/list ok 3 ok 4 ok 5 ok 6 ok t/smart_tag_wrapper......... 1..2 ok 1 - got correct output for simple ok 2 - got correct output for simple ok t/subclassing............... 1..11 ok 1 ok 2 - $self is correct in template block ok 3 - Lint checked clean ok 4 ok 5 - Lint checked clean ok 6 - got warning ok 7 ok 8 ok 9 - got warning ok 10 - Can't call private templates ok 11 - Lint checked clean ok t/subtemplates.............. 1..9 ok 1 ok 2 - Lint checked clean ok 3 ok 4 - Lint checked clean ok 5 - CAlling /toplevel does call /content ok 6 - Lint checked clean ok 7 - Calling my/wrapper doesn't call /content ok 8 - calling my/wrapper does call my/content ok 9 - Lint checked clean ok t/tag_sub_list.............. 1..8 ok 1 - table {...} found ok 2 - li {...} found ok 3 - table {...} found ok 4 - li {...} found ok 5 - HTML tag div {...} also found ok 6 - tabbox {...} found ok 7 - HTML tag div {...} also found ok 8 - tabbox {...} found ok t/tagset_html............... 1..4 ok 1 - ok 2 - ok 3 - ok 4 ok t/tagset_mix................ 1..1 ok 1 ok t/tagset_rdf................ 1..2 ok 1 ok 2 ok t/tagset_rdf_em............. 1..1 ok 1 ok t/tagset_xul................ 1..1 ok 1 ok t/trivial................... 1..9 ok 1 - show fucntion returned context ok 2 - Lint checked clean ok 3 - T::D->show returns a string ok 4 - Lint checked clean ok 5 - show simple filled the buffer ok 6 - Lint checked clean ok 7 - We found fireball in the output ok 8 - Only found one ok 9 - Lint checked clean ok t/utf8...................... 1..12 ok 1 ok 2 - Lint checked clean ok 3 ok 4 - Lint checked clean ok 5 Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. not ok 6 - Lint checked clean # TODO lint doesn't handle unicode sometimes # Failed (TODO) test 'Lint checked clean' # at t/utils.pl line 13. # got: '4' # expected: '0' # (2:1) Invalid character \x442 should be written as # (2:1) Invalid character \x435 should be written as # (2:1) Invalid character \x441 should be written as # (2:1) Invalid character \x442 should be written as ok 7 Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. Use of uninitialized value $val in substitution (s///) at /home/cpanfly/var/megalib/HTML/Lint/Error.pm line 112. not ok 8 - Lint checked clean # TODO lint doesn't handle unicode # Failed (TODO) test 'Lint checked clean' # at t/utils.pl line 13. # got: '8' # expected: '0' # (2:1) Invalid character \x442 should be written as # (2:1) Invalid character \x435 should be written as # (2:1) Invalid character \x441 should be written as # (2:1) Invalid character \x442 should be written as # (3:1) Invalid character \x442 should be written as # (3:1) Invalid character \x435 should be written as # (3:1) Invalid character \x441 should be written as # (3:1) Invalid character \x442 should be written as ok 9 ok 10 - Lint checked clean ok 11 ok 12 - Lint checked clean ok t/wrappers.................. 1..2 ok 1 - Get inner output ok 2 - Should have the wrapped output ok t/xss....................... 1..8 ok 1 - #
This is my <b>content</b>
ok 2 - Lint checked clean ok 3 - #
This is my <b>content</b>
ok 4 - Lint checked clean ok 5 - #
#

This is my <b>content</b>

#
ok 6 - Lint checked clean ok 7 - #
#

This is my # content #

#
ok 8 - Lint checked clean ok All tests successful. Files=39, Tests=341, 3 wallclock secs ( 0.04 usr 0.20 sys + 1.85 cusr 0.53 csys = 2.62 CPU) Result: PASS SARTAK/Template-Declare-0.29.tar.gz make test TEST_VERBOSE=1 -- OK Shawn M Moore <sartak@gmail.com> Perlish declarative templates >>> (cd /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5 && tar cvf - Template-Declare-0.29.ppd blib) | gzip -c >/home/cpanfly/var/REPO/S/SA/SARTAK/Template-Declare-0.29.tar.gz Template-Declare-0.29.ppd blib/ blib/lib/ blib/lib/Template/ blib/lib/Template/Declare.pm blib/lib/Template/Declare/ blib/lib/Template/Declare/TagSet/ blib/lib/Template/Declare/TagSet/RDF/ blib/lib/Template/Declare/TagSet/RDF/EM.pm blib/lib/Template/Declare/TagSet/RDF.pm blib/lib/Template/Declare/TagSet/XUL.pm blib/lib/Template/Declare/TagSet/HTML.pm blib/lib/Template/Declare/Tags.pm blib/lib/Template/Declare/Buffer.pm blib/lib/Template/Declare/TagSet.pm blib/man3/ blib/man3/Template::Declare::TagSet::HTML.3 blib/man3/Template::Declare::TagSet.3 blib/man3/Template::Declare::TagSet::RDF.3 blib/man3/Template::Declare::Buffer.3 blib/man3/Template::Declare::TagSet::XUL.3 blib/man3/Template::Declare.3 blib/man3/Template::Declare::TagSet::RDF::EM.3 blib/man3/Template::Declare::Tags.3 >>> mv /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/Template-Declare-0.29.ppd /home/cpanfly/var/REPO/S/SA/SARTAK Running test for module 'Perl6::Say' Running make for J/JK/JKEENAN/Perl6-Say-0.12.tar.gz Prepending /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/arch /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/lib to PERL5LIB for 'get' Checksum for /net/nas/data/cpan/authors/id/J/JK/JKEENAN/Perl6-Say-0.12.tar.gz ok Perl6-Say-0.12/ Perl6-Say-0.12/510/ Perl6-Say-0.12/510/01-feature.pl Perl6-Say-0.12/510/02-bundle.pl Perl6-Say-0.12/510/03-implicit.pl Perl6-Say-0.12/Changes Perl6-Say-0.12/lib/ Perl6-Say-0.12/lib/Perl6/ Perl6-Say-0.12/lib/Perl6/Say.pm Perl6-Say-0.12/Makefile.PL Perl6-Say-0.12/MANIFEST Perl6-Say-0.12/MANIFEST.SKIP Perl6-Say-0.12/META.yml Perl6-Say-0.12/README Perl6-Say-0.12/t/ Perl6-Say-0.12/t/01_stdout.t Perl6-Say-0.12/t/02_file.t Perl6-Say-0.12/t/03_list.t Perl6-Say-0.12/t/04_file_list.t Perl6-Say-0.12/t/05_scalar_ref.t Perl6-Say-0.12/t/06_io.t Perl6-Say-0.12/t/07_select.t Perl6-Say-0.12/t/08_iohandle_say.t Perl6-Say-0.12/t/09_ors.t Perl6-Say-0.12/t/lib/ Perl6-Say-0.12/t/lib/Perl6/ Perl6-Say-0.12/t/lib/Perl6/Say/ Perl6-Say-0.12/t/lib/Perl6/Say/Auxiliary.pm Prepending /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/arch /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build J/JK/JKEENAN/Perl6-Say-0.12.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Perl6::Say Could not read '/home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/META.yml'. Falling back to other methods to determine prerequisites >>> make cp lib/Perl6/Say.pm blib/lib/Perl6/Say.pm Manifying blib/man3/Perl6::Say.3 JKEENAN/Perl6-Say-0.12.tar.gz make -- OK Prepending /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/arch /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/01_stdout.......... 1..16 ok 1 - use Perl6::Say; ok 2 - use Carp; ok 3 - use Perl6::Say::Auxiliary; ok 4 - 1 line correctly printed to STDOUT as default print filehandle ok 5 - 2 lines correctly printed to STDOUT as default print filehandle ok 6 - 3 lines correctly printed to STDOUT as default print filehandle ok 7 - 1 line correctly printed to STDOUT as default print filehandle ok 8 - 1 line correctly printed to STDOUT as explicitly named print filehandle ok 9 - 2 lines correctly printed to STDOUT as explicitly named print filehandle ok 10 - 3 lines correctly printed to STDOUT as explicitly named print filehandle ok 11 - 1 line correctly printed to STDOUT as explicitly named print filehandle ok 12 - 1 line correctly printed from $_ ok 13 - 2 lines correctly printed from $_ ok 14 - 1 line correctly printed from $_ ok 15 - 1 line correctly printed where argument was 'undef' ok 16 - 1 line correctly printed where there were 0 arguments and no parens ok t/02_file............ 1..28 ok 1 - use Perl6::Say; ok 2 - use File::Temp; ok 3 - use Carp; ok 4 - use Perl6::Say::Auxiliary; ok 5 - 1 line correctly printed to file via global filehandle ok 6 - 2 lines correctly printed to file via global filehandle ok 7 - 3 lines correctly printed to file via global filehandle ok 8 - 1 line correctly printed to file via global filehandle ok 9 - 1 line correctly printed to file via global filehandle, arrow syntax ok 10 - 2 lines correctly printed to file via global filehandle, arrow syntax ok 11 - 3 lines correctly printed to file via global filehandle, arrow syntax ok 12 - 1 line correctly printed to file via global filehandle, arrow syntax ok 13 - 1 line correctly printed to file via global filehandle, typeglob syntax ok 14 - 2 lines correctly printed to file via global filehandle, typeglob syntax ok 15 - 3 lines correctly printed to file via global filehandle, typeglob syntax ok 16 - 1 line correctly printed to file via global filehandle, typeglob syntax ok 17 - 1 line correctly printed to file via global filehandle, ref to typeglob syntax ok 18 - 2 lines correctly printed to file via global filehandle, ref to typeglob syntax ok 19 - 3 lines correctly printed to file via global filehandle, ref to typeglob syntax ok 20 - 1 line correctly printed to file via global filehandle, ref to typeglob syntax ok 21 - 1 line correctly printed to file via lexical filehandle, comma syntax ok 22 - 2 lines correctly printed to file via lexical filehandle, comma syntax ok 23 - 3 lines correctly printed to file via lexical filehandle, comma syntax ok 24 - 1 line correctly printed to file via lexical filehandle, comma syntax ok 25 - 1 line correctly printed to file via lexical filehandle, arrow syntax ok 26 - 2 lines correctly printed to file via lexical filehandle, arrow syntax ok 27 - 3 lines correctly printed to file via lexical filehandle, arrow syntax ok 28 - 1 line correctly printed to file via lexical filehandle, arrow syntax ok t/03_list............ 1..11 ok 1 - use Perl6::Say; ok 2 - use Carp; ok 3 - use Perl6::Say::Auxiliary; ok 4 - 1 line correctly printed to STDOUT as default print filehandle ok 5 - 2 lines correctly printed to STDOUT as default print filehandle ok 6 - 3 lines correctly printed to STDOUT as default print filehandle ok 7 - 1 line correctly printed to STDOUT as default print filehandle ok 8 - 1 line correctly printed to STDOUT as explicitly named print filehandle ok 9 - 2 lines correctly printed to STDOUT as explicitly named print filehandle ok 10 - 3 lines correctly printed to STDOUT as explicitly named print filehandle ok 11 - 1 line correctly printed to STDOUT as explicitly named print filehandle ok t/04_file_list....... 1..28 ok 1 - use Perl6::Say; ok 2 - use File::Temp; ok 3 - use Carp; ok 4 - use Perl6::Say::Auxiliary; ok 5 - 1 line correctly printed to file via global filehandle ok 6 - 2 lines correctly printed to file via global filehandle ok 7 - 3 lines correctly printed to file via global filehandle ok 8 - 1 line correctly printed to file via global filehandle ok 9 - 1 line correctly printed to file via global filehandle, arrow syntax ok 10 - 2 lines correctly printed to file via global filehandle, arrow syntax ok 11 - 3 lines correctly printed to file via global filehandle, arrow syntax ok 12 - 1 line correctly printed to file via global filehandle, arrow syntax ok 13 - 1 line correctly printed to file via global filehandle, typeglob syntax ok 14 - 2 lines correctly printed to file via global filehandle, typeglob syntax ok 15 - 3 lines correctly printed to file via global filehandle, typeglob syntax ok 16 - 1 line correctly printed to file via global filehandle, typeglob syntax ok 17 - 1 line correctly printed to file via global filehandle, ref to typeglob syntax ok 18 - 2 lines correctly printed to file via global filehandle, ref to typeglob syntax ok 19 - 3 lines correctly printed to file via global filehandle, ref to typeglob syntax ok 20 - 1 line correctly printed to file via global filehandle, ref to typeglob syntax ok 21 - 1 line correctly printed to file via lexical filehandle, comma syntax ok 22 - 2 lines correctly printed to file via lexical filehandle, comma syntax ok 23 - 3 lines correctly printed to file via lexical filehandle, comma syntax ok 24 - 1 line correctly printed to file via lexical filehandle, comma syntax ok 25 - 1 line correctly printed to file via lexical filehandle, arrow syntax ok 26 - 2 lines correctly printed to file via lexical filehandle, arrow syntax ok 27 - 3 lines correctly printed to file via lexical filehandle, arrow syntax ok 28 - 1 line correctly printed to file via lexical filehandle, arrow syntax ok t/05_scalar_ref...... 1..27 ok 1 - use Perl6::Say; ok 2 - use Carp; ok 3 - use Perl6::Say::Auxiliary; ok 4 - 1 line correctly printed to string via global filehandle ok 5 - 2 lines correctly printed to string via global filehandle ok 6 - 3 lines correctly printed to string via global filehandle ok 7 - 1 line correctly printed to string via global filehandle ok 8 - 1 line correctly printed to string via global filehandle, arrow syntax ok 9 - 2 lines correctly printed to string via global filehandle, arrow syntax ok 10 - 3 lines correctly printed to string via global filehandle, arrow syntax ok 11 - 1 line correctly printed to string via global filehandle, arrow syntax ok 12 - 1 line correctly printed to string via global filehandle, typeglob syntax ok 13 - 2 lines correctly printed to string via global filehandle, typeglob syntax ok 14 - 3 lines correctly printed to string via global filehandle, typeglob syntax ok 15 - 1 line correctly printed to string via global filehandle, typeglob syntax ok 16 - 1 line correctly printed to string via global filehandle, ref to typeglob syntax ok 17 - 2 lines correctly printed to string via global filehandle, ref to typeglob syntax ok 18 - 3 lines correctly printed to string via global filehandle, ref to typeglob syntax ok 19 - 1 line correctly printed to string via global filehandle, ref to typeglob syntax ok 20 - 1 line correctly printed to string via lexical filehandle, comma syntax ok 21 - 2 lines correctly printed to string via lexical filehandle, comma syntax ok 22 - 3 lines correctly printed to string via lexical filehandle, comma syntax ok 23 - 1 line correctly printed to string via lexical filehandle, comma syntax ok 24 - 1 line correctly printed to string via lexical filehandle, arrow syntax ok 25 - 2 lines correctly printed to string via lexical filehandle, arrow syntax ok 26 - 3 lines correctly printed to string via lexical filehandle, arrow syntax ok 27 - 1 line correctly printed to string via lexical filehandle, arrow syntax ok t/06_io.............. 1..22 ok 1 - use Perl6::Say; ok 2 - use File::Temp; ok 3 - use Carp; ok 4 - use FileHandle; ok 5 - use IO::File; ok 6 - use Perl6::Say::Auxiliary; ok 7 - 1 line correctly printed to file via FileHandle object, comma syntax ok 8 - 2 lines correctly printed to file via FileHandle object, comma syntax ok 9 - 3 lines correctly printed to file via FileHandle object, comma syntax ok 10 - 1 line correctly printed to file via FileHandle object, comma syntax ok 11 - 1 line correctly printed to file via FileHandle object, arrow syntax ok 12 - 2 lines correctly printed to file via FileHandle object, arrow syntax ok 13 - 3 lines correctly printed to file via FileHandle object, arrow syntax ok 14 - 1 line correctly printed to file via FileHandle object, arrow syntax ok 15 - 1 line correctly printed to file via IO::File object, comma syntax ok 16 - 2 lines correctly printed to file via IO::File object, comma syntax ok 17 - 3 lines correctly printed to file via IO::File object, comma syntax ok 18 - 1 line correctly printed to file via IO::File object, comma syntax ok 19 - 1 line correctly printed to file via IO::File object, arrow syntax ok 20 - 2 lines correctly printed to file via IO::File object, arrow syntax ok 21 - 3 lines correctly printed to file via IO::File object, arrow syntax ok 22 - 1 line correctly printed to file via IO::File object, arrow syntax ok t/07_select.......... 1..19 ok 1 - use Perl6::Say; ok 2 - use Carp; ok 3 - use Perl6::Say::Auxiliary; ok 4 - 1 line correctly printed to string via global filehandle, selected ok 5 - 2 lines correctly printed to string via global filehandle, selected ok 6 - 3 lines correctly printed to string via global filehandle, selected ok 7 - 1 line correctly printed to string via global filehandle, selected ok 8 - 1 line correctly printed to string via global filehandle, selected, arrow syntax ok 9 - 2 lines correctly printed to string via global filehandle, selected, arrow syntax ok 10 - 3 lines correctly printed to string via global filehandle, selected, arrow syntax ok 11 - 1 line correctly printed to string via global filehandle, selected, arrow syntax ok 12 - 1 line correctly printed to string via lexical filehandle, selected, comma syntax ok 13 - 2 lines correctly printed to string via lexical filehandle, selected, comma syntax ok 14 - 3 lines correctly printed to string via lexical filehandle, selected, comma syntax ok 15 - 1 line correctly printed to string via lexical filehandle, selected, comma syntax ok 16 - 1 line correctly printed to string via lexical filehandle, selected, arrow syntax ok 17 - 2 lines correctly printed to string via lexical filehandle, selected, arrow syntax ok 18 - 3 lines correctly printed to string via lexical filehandle, selected, arrow syntax ok 19 - 1 line correctly printed to string via lexical filehandle, selected, arrow syntax ok t/08_iohandle_say.... 1..14 ok 1 - use IO::Handle; ok 2 - use Carp; ok 3 - use Perl6::Say::Auxiliary; ok 4 - IO::Handle->can('say') ok 5 - IO::Handle::say() is now undefined ok 6 - require Perl6::Say; ok 7 - 1 line correctly printed to STDOUT as named print filehandle ok 8 - 2 lines correctly printed to STDOUT as named print filehandle ok 9 - 3 lines correctly printed to STDOUT as named print filehandle ok 10 - 1 line correctly printed to STDOUT as named print filehandle ok 11 - 1 line Perl6::Say::say() now IO::Handle::say() ok 12 - 2 lines Perl6::Say::say() now IO::Handle::say() ok 13 - 3 lines Perl6::Say::say() now IO::Handle::say() ok 14 - 1 line Perl6::Say::say() now IO::Handle::say() ok t/09_ors............. 1..3 ok 1 - use Perl6::Say; ok 2 - use Carp; ok 3 - say() functioned as predicted with $\ (Output Record Separator) ok All tests successful. Files=9, Tests=168, 1 wallclock secs ( 0.00 usr 0.06 sys + 0.15 cusr 0.37 csys = 0.58 CPU) Result: PASS JKEENAN/Perl6-Say-0.12.tar.gz make test TEST_VERBOSE=1 -- OK PPD for Perl6-Say-0.12 already made Running make for L/LB/LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz Prepending /home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/blib/arch /home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/blib/lib /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/arch /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/lib to PERL5LIB for 'get' Has already been unwrapped into directory /home/cpanfly/var/cpan/build/CPAN-Mini-Webserver-0.33-kRWmWa Prepending /home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/blib/arch /home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/blib/lib /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/arch /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/lib to PERL5LIB for 'make' CPAN.pm: Going to build L/LB/LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz >>> make cp lib/CPAN/Mini/Webserver.pm blib/lib/CPAN/Mini/Webserver.pm cp lib/CPAN/Mini/Webserver/Templates.pm blib/lib/CPAN/Mini/Webserver/Templates.pm cp bin/minicpan_webserver blib/script/minicpan_webserver /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/minicpan_webserver Manifying blib/man1/minicpan_webserver.1 Manifying blib/man3/CPAN::Mini::Webserver::Templates.3 Manifying blib/man3/CPAN::Mini::Webserver.3 LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz make -- OK Prepending /home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/blib/arch /home/cpanfly/var/cpan/build/Perl6-Say-0.12-7MuVsB/blib/lib /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/arch /home/cpanfly/var/cpan/build/Template-Declare-0.29-lkSGa5/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/pod....... 1..3 ok 1 - blib/script/minicpan_webserver ok 2 - blib/lib/CPAN/Mini/Webserver.pm ok 3 - blib/lib/CPAN/Mini/Webserver/Templates.pm ok t/simple.... 1..19 ok 1 - use CPAN::Mini::Webserver; Use of uninitialized value $pat in substitution (s///) at /home/cpanfly/ap1003/lib/File/Glob.pm line 145, line 16. Use of uninitialized value $pat in substitution (s///) at /home/cpanfly/ap1003/lib/File/Glob.pm line 146, line 16. Use of uninitialized value $pat in pattern match (m//) at /home/cpanfly/ap1003/lib/File/Glob.pm line 148, line 16. Use of uninitialized value in subroutine entry at /home/cpanfly/ap1003/lib/File/Glob.pm line 166, line 16. Please set up minicpan at /home/cpanfly/var/cpan/build/CPAN-Mini-Webserver-0.33-kRWmWa/blib/lib/CPAN/Mini/Webserver.pm line 34, line 16. # Looks like you planned 19 tests but only ran 1. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 18/19 subtests Test Summary Report ------------------- t/simple (Wstat: 65280 Tests: 1 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 19 tests but ran 1. Files=2, Tests=4, 0 wallclock secs ( 0.00 usr 0.00 sys + 0.43 cusr 0.20 csys = 0.63 CPU) Result: FAIL Failed 1/2 test programs. 0/4 subtests failed. make: *** [test_dynamic] Error 255 LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports LBROCARD/CPAN-Mini-Webserver-0.33.tar.gz Finished 2008-08-08T06:03:42