Start 2008-12-10T06:17:12 Going to read /home/cpanfly/var/cpan/Metadata Database was generated on Wed, 10 Dec 2008 11:26:54 GMT Running make for V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz ok ZConf-Cron-0.0.0/ ZConf-Cron-0.0.0/t/ ZConf-Cron-0.0.0/lib/ ZConf-Cron-0.0.0/bin/ ZConf-Cron-0.0.0/Changes ZConf-Cron-0.0.0/README ZConf-Cron-0.0.0/MANIFEST ZConf-Cron-0.0.0/Makefile.PL ZConf-Cron-0.0.0/.cvsignore ZConf-Cron-0.0.0/bin/zccron ZConf-Cron-0.0.0/bin/zccrontab ZConf-Cron-0.0.0/bin/.exists ZConf-Cron-0.0.0/lib/ZConf/ ZConf-Cron-0.0.0/lib/ZConf/Cron.pm ZConf-Cron-0.0.0/t/pod.t ZConf-Cron-0.0.0/t/boilerplate.t ZConf-Cron-0.0.0/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Warning: prerequisite ZConf 0 not found. Writing Makefile for ZConf::Cron ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-Cron-0.0.0.tar.gz ---- ZConf [requires] Running make test Delayed until after prerequisites Running test for module 'ZConf' Running make for V/VV/VVELOX/ZConf-0.7.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-0.7.0.tar.gz ok ZConf-0.7.0/ ZConf-0.7.0/bin/ ZConf-0.7.0/lib/ ZConf-0.7.0/t/ ZConf-0.7.0/.cvsignore ZConf-0.7.0/Changes ZConf-0.7.0/MANIFEST ZConf-0.7.0/Makefile.PL ZConf-0.7.0/README ZConf-0.7.0/TODO ZConf-0.7.0/t/boilerplate.t ZConf-0.7.0/t/pod.t ZConf-0.7.0/t/pod-coverage.t ZConf-0.7.0/t/00-load.t ZConf-0.7.0/lib/ZConf.pm ZConf-0.7.0/bin/zccreate ZConf-0.7.0/bin/zcget ZConf-0.7.0/bin/zcls ZConf-0.7.0/bin/zcrm ZConf-0.7.0/bin/zcset ZConf-0.7.0/bin/zcvdel ZConf-0.7.0/bin/zcvls ZConf-0.7.0/bin/.exists CPAN.pm: Going to build V/VV/VVELOX/ZConf-0.7.0.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Warning: prerequisite Chooser 0 not found. Warning: prerequisite Net::LDAP::Makepath 0 not found. Checking if your kit is complete... Looks good Writing Makefile for ZConf ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-0.7.0.tar.gz ---- Net::LDAP::Makepath [requires] Chooser [requires] Running make test Delayed until after prerequisites Running test for module 'Net::LDAP::Makepath' Running make for V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz ok Net-LDAP-Makepath-1.0.0/ Net-LDAP-Makepath-1.0.0/t/ Net-LDAP-Makepath-1.0.0/lib/ Net-LDAP-Makepath-1.0.0/Changes Net-LDAP-Makepath-1.0.0/README Net-LDAP-Makepath-1.0.0/MANIFEST Net-LDAP-Makepath-1.0.0/.cvsignore Net-LDAP-Makepath-1.0.0/Makefile.PL Net-LDAP-Makepath-1.0.0/lib/Net/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/Makepath.pm Net-LDAP-Makepath-1.0.0/t/pod-coverage.t Net-LDAP-Makepath-1.0.0/t/pod.t Net-LDAP-Makepath-1.0.0/t/boilerplate.t Net-LDAP-Makepath-1.0.0/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Net::LDAP::Makepath >>> make cp lib/Net/LDAP/Makepath.pm blib/lib/Net/LDAP/Makepath.pm Manifying blib/man3/Net::LDAP::Makepath.3 VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... 1..1 ok 1 - use Net::LDAP::Makepath; # Testing Net::LDAP::Makepath 1.0.0, Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static ok t/boilerplate..... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/Net/LDAP/Makepath.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.... 1..1 not ok 1 - Pod coverage on Net::LDAP::Makepath # Failed test 'Pod coverage on Net::LDAP::Makepath' # at /home/cpanfly/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for Net::LDAP::Makepath is 0.0%, with 1 naked subroutine: # LDAPmakepathSimple # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod............. 1..1 ok 1 - blib/lib/Net/LDAP/Makepath.pm ok Test Summary Report ------------------- t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 t/pod-coverage (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=6, 2 wallclock secs ( 0.01 usr 0.02 sys + 0.23 cusr 0.08 csys = 0.34 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Running test for module 'Chooser' Running make for V/VV/VVELOX/Chooser-1.1.6.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Chooser-1.1.6.tar.gz ok Chooser-1.1.6/ Chooser-1.1.6/t/ Chooser-1.1.6/lib/ Chooser-1.1.6/Changes Chooser-1.1.6/README Chooser-1.1.6/MANIFEST Chooser-1.1.6/.cvsignore Chooser-1.1.6/Makefile.PL Chooser-1.1.6/lib/Chooser.pm Chooser-1.1.6/t/pod-coverage.t Chooser-1.1.6/t/pod.t Chooser-1.1.6/t/boilerplate.t Chooser-1.1.6/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/Chooser-1.1.6.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Chooser >>> make cp lib/Chooser.pm blib/lib/Chooser.pm Manifying blib/man3/Chooser.3 VVELOX/Chooser-1.1.6.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... 1..1 ok 1 - use Chooser; # Testing Chooser 1.1.6, Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static ok t/boilerplate..... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/Chooser.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.... 1..1 not ok 1 - Pod coverage on Chooser # Failed test 'Pod coverage on Chooser' # at /home/cpanfly/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for Chooser is 50.0%, with 4 naked subroutines: # argstohash # checklegit # runcheck # valueProcess # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod............. 1..1 ok 1 - blib/lib/Chooser.pm ok Test Summary Report ------------------- t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 t/pod-coverage (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=6, 2 wallclock secs ( 0.02 usr 0.01 sys + 0.14 cusr 0.07 csys = 0.24 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/Chooser-1.1.6.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/Chooser-1.1.6.tar.gz Running make for V/VV/VVELOX/ZConf-0.7.0.tar.gz Has already been unwrapped into directory /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF CPAN.pm: Going to build V/VV/VVELOX/ZConf-0.7.0.tar.gz Warning: Prerequisite 'Net::LDAP::Makepath => 0' for 'VVELOX/ZConf-0.7.0.tar.gz' failed when processing 'VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. Warning: Prerequisite 'Chooser => 0' for 'VVELOX/ZConf-0.7.0.tar.gz' failed when processing 'VVELOX/Chooser-1.1.6.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/ZConf.pm blib/lib/ZConf.pm Manifying blib/man3/ZConf.3 VVELOX/ZConf-0.7.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load......... 1..1 not ok 1 - use ZConf; # Failed test 'use ZConf;' # at t/00-load.t line 6. # Tried to use 'ZConf'. # Error: Can't locate Net/LDAP/Makepath.pm in @INC (@INC contains: /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF/blib/lib /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF/blib/arch /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF/blib/lib /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF/blib/arch /home/cpanfly/var/megalib /home/cpanfly/ap1003/site/lib /home/cpanfly/ap1003/lib) at /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF/blib/lib/ZConf.pm line 6, line 275. # BEGIN failed--compilation aborted at /home/cpanfly/var/cpan/build/ZConf-0.7.0-rbIAbF/blib/lib/ZConf.pm line 6, line 275. # Compilation failed in require at (eval 3) line 2, line 275. # BEGIN failed--compilation aborted at (eval 3) line 2, line 275. Use of uninitialized value $ZConf::VERSION in concatenation (.) or string at t/00-load.t line 9, line 275. # Testing ZConf , Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate..... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.... 1..1 ok 1 - Pod coverage on ZConf ok t/pod............. 1..1 ok 1 - blib/lib/ZConf.pm ok Test Summary Report ------------------- t/00-load (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=4, Tests=6, 3 wallclock secs ( 0.01 usr 0.01 sys + 0.43 cusr 0.10 csys = 0.55 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/ZConf-0.7.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-0.7.0.tar.gz Running make for V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz Has already been unwrapped into directory /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6 CPAN.pm: Going to build V/VV/VVELOX/ZConf-Cron-0.0.0.tar.gz Warning: Prerequisite 'ZConf => 0' for 'VVELOX/ZConf-Cron-0.0.0.tar.gz' failed when processing 'VVELOX/ZConf-0.7.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/ZConf/Cron.pm blib/lib/ZConf/Cron.pm Manifying blib/man3/ZConf::Cron.3 VVELOX/ZConf-Cron-0.0.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/00-load........ 1..1 not ok 1 - use ZConf::Cron; # Failed test 'use ZConf::Cron;' # at t/00-load.t line 6. # Tried to use 'ZConf::Cron'. # Error: Can't locate ZConf.pm in @INC (@INC contains: /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6/blib/lib /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6/blib/arch /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6/blib/lib /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6/blib/arch /home/cpanfly/var/megalib /home/cpanfly/ap1003/site/lib /home/cpanfly/ap1003/lib) at /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6/blib/lib/ZConf/Cron.pm line 3. # BEGIN failed--compilation aborted at /home/cpanfly/var/cpan/build/ZConf-Cron-0.0.0-0lLcQ6/blib/lib/ZConf/Cron.pm line 3. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value $ZConf::Cron::VERSION in concatenation (.) or string at t/00-load.t line 9. # Testing ZConf::Cron , Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf/Cron.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod............ 1..1 ok 1 - blib/lib/ZConf/Cron.pm ok Test Summary Report ------------------- t/00-load (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=3, Tests=5, 1 wallclock secs ( 0.01 usr 0.04 sys + 0.08 cusr 0.04 csys = 0.17 CPU) Result: FAIL Failed 1/3 test programs. 1/5 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/ZConf-Cron-0.0.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-Cron-0.0.0.tar.gz Finished 2008-12-10T06:17:42