Start 2009-11-02T18:53:47 ActivePerl-1003 CPAN-1.9402 Going to read '/home/cpanfly/var/cpan/Metadata' Database was generated on Mon, 02 Nov 2009 23:27:07 GMT Running make for V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz ok Will not use Archive::Tar, need 1.00 ZConf-GUI-1.0.2/ ZConf-GUI-1.0.2/lib/ ZConf-GUI-1.0.2/bin/ ZConf-GUI-1.0.2/t/ ZConf-GUI-1.0.2/.cvsignore ZConf-GUI-1.0.2/README ZConf-GUI-1.0.2/MANIFEST ZConf-GUI-1.0.2/Makefile.PL ZConf-GUI-1.0.2/Changes ZConf-GUI-1.0.2/t/boilerplate.t ZConf-GUI-1.0.2/t/pod.t ZConf-GUI-1.0.2/t/pod-coverage.t ZConf-GUI-1.0.2/t/00-load.t ZConf-GUI-1.0.2/bin/zcgui-gux ZConf-GUI-1.0.2/bin/zcgui-which ZConf-GUI-1.0.2/bin/zcgui-lm ZConf-GUI-1.0.2/bin/zcgui-set ZConf-GUI-1.0.2/bin/zcgui-la ZConf-GUI-1.0.2/bin/zcgui-get ZConf-GUI-1.0.2/bin/zcgui-sux ZConf-GUI-1.0.2/lib/ZConf/ ZConf-GUI-1.0.2/lib/ZConf/GUI.pm CPAN.pm: Going to build V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Warning: prerequisite ZConf 0 not found. Checking if your kit is complete... Looks good Writing Makefile for ZConf::GUI ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-GUI-1.0.2.tar.gz ---- ZConf [requires] Running make test Delayed until after prerequisites Running test for module 'ZConf' Running make for V/VV/VVELOX/ZConf-1.2.1.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/ZConf-1.2.1.tar.gz ok Will not use Archive::Tar, need 1.00 ZConf-1.2.1/ ZConf-1.2.1/bin/ ZConf-1.2.1/t/ ZConf-1.2.1/lib/ ZConf-1.2.1/Changes ZConf-1.2.1/.cvsignore ZConf-1.2.1/README ZConf-1.2.1/TODO ZConf-1.2.1/MANIFEST ZConf-1.2.1/Makefile.PL ZConf-1.2.1/lib/ZConf.pm ZConf-1.2.1/t/boilerplate.t ZConf-1.2.1/t/pod.t ZConf-1.2.1/t/pod-coverage.t ZConf-1.2.1/t/00-load.t ZConf-1.2.1/bin/zccreate ZConf-1.2.1/bin/zcvls ZConf-1.2.1/bin/zcvdel ZConf-1.2.1/bin/zcset ZConf-1.2.1/bin/zcls ZConf-1.2.1/bin/zcrm ZConf-1.2.1/bin/zcget CPAN.pm: Going to build V/VV/VVELOX/ZConf-1.2.1.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Warning: prerequisite Net::LDAP::Makepath 0 not found. Checking if your kit is complete... Looks good Writing Makefile for ZConf ---- Unsatisfied dependencies detected during ---- ---- VVELOX/ZConf-1.2.1.tar.gz ---- Net::LDAP::Makepath [requires] Running make test Delayed until after prerequisites Running test for module 'Net::LDAP::Makepath' Running make for V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Checksum for /net/nas/data/cpan/authors/id/V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz ok Will not use Archive::Tar, need 1.00 Net-LDAP-Makepath-1.0.0/ Net-LDAP-Makepath-1.0.0/t/ Net-LDAP-Makepath-1.0.0/lib/ Net-LDAP-Makepath-1.0.0/Changes Net-LDAP-Makepath-1.0.0/README Net-LDAP-Makepath-1.0.0/MANIFEST Net-LDAP-Makepath-1.0.0/.cvsignore Net-LDAP-Makepath-1.0.0/Makefile.PL Net-LDAP-Makepath-1.0.0/lib/Net/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/ Net-LDAP-Makepath-1.0.0/lib/Net/LDAP/Makepath.pm Net-LDAP-Makepath-1.0.0/t/pod-coverage.t Net-LDAP-Makepath-1.0.0/t/pod.t Net-LDAP-Makepath-1.0.0/t/boilerplate.t Net-LDAP-Makepath-1.0.0/t/00-load.t CPAN.pm: Going to build V/VV/VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz >>> /home/cpanfly/ap1003/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Writing Makefile for Net::LDAP::Makepath >>> make cp lib/Net/LDAP/Makepath.pm blib/lib/Net/LDAP/Makepath.pm Manifying blib/man3/Net::LDAP::Makepath.3 VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Net::LDAP::Makepath 1.0.0, Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static t/00-load.t ....... 1..1 ok 1 - use Net::LDAP::Makepath; ok t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/Net/LDAP/Makepath.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok # Failed test 'Pod coverage on Net::LDAP::Makepath' # at /home/cpanfly/var/megalib/Test/Pod/Coverage.pm line 126. # Coverage for Net::LDAP::Makepath is 0.0%, with 1 naked subroutine: # LDAPmakepathSimple # Looks like you failed 1 test of 1. t/pod-coverage.t .. 1..1 not ok 1 - Pod coverage on Net::LDAP::Makepath Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/pod.t ........... 1..1 ok 1 - blib/lib/Net/LDAP/Makepath.pm ok Test Summary Report ------------------- t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 t/pod-coverage.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=4, Tests=6, 1 wallclock secs ( 0.04 usr 0.00 sys + 0.33 cusr 0.02 csys = 0.39 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz Running make for V/VV/VVELOX/ZConf-1.2.1.tar.gz Has already been unwrapped into directory /home/cpanfly/var/cpan/build/ZConf-1.2.1-lijtkz CPAN.pm: Going to build V/VV/VVELOX/ZConf-1.2.1.tar.gz Warning: Prerequisite 'Net::LDAP::Makepath => 0' for 'VVELOX/ZConf-1.2.1.tar.gz' failed when processing 'VVELOX/Net-LDAP-Makepath-1.0.0.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/ZConf.pm blib/lib/ZConf.pm Manifying blib/man3/ZConf.3 VVELOX/ZConf-1.2.1.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use ZConf;' # at t/00-load.t line 6. # Tried to use 'ZConf'. # Error: Can't locate Net/LDAP/Makepath.pm in @INC (@INC contains: /home/cpanfly/var/cpan/build/ZConf-1.2.1-lijtkz/blib/lib /home/cpanfly/var/cpan/build/ZConf-1.2.1-lijtkz/blib/arch /home/cpanfly/var/megalib /home/cpanfly/ap1003/site/lib /home/cpanfly/ap1003/lib) at /home/cpanfly/var/cpan/build/ZConf-1.2.1-lijtkz/blib/lib/ZConf.pm line 6, line 275. # BEGIN failed--compilation aborted at /home/cpanfly/var/cpan/build/ZConf-1.2.1-lijtkz/blib/lib/ZConf.pm line 6, line 275. # Compilation failed in require at (eval 4) line 2, line 275. # BEGIN failed--compilation aborted at (eval 4) line 2, line 275. Use of uninitialized value $ZConf::VERSION in concatenation (.) or string at t/00-load.t line 9, line 275. # Testing ZConf , Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static # Looks like you failed 1 test of 1. t/00-load.t ....... 1..1 not ok 1 - use ZConf; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on ZConf ok t/pod.t ........... 1..1 ok 1 - blib/lib/ZConf.pm ok Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=4, Tests=6, 1 wallclock secs ( 0.01 usr 0.04 sys + 0.43 cusr 0.11 csys = 0.59 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/ZConf-1.2.1.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-1.2.1.tar.gz Running make for V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz Has already been unwrapped into directory /home/cpanfly/var/cpan/build/ZConf-GUI-1.0.2-7rqD69 CPAN.pm: Going to build V/VV/VVELOX/ZConf-GUI-1.0.2.tar.gz Warning: Prerequisite 'ZConf => 0' for 'VVELOX/ZConf-GUI-1.0.2.tar.gz' failed when processing 'VVELOX/ZConf-1.2.1.tar.gz' with 'make_test => NO'. Continuing, but chances to succeed are limited. >>> make cp lib/ZConf/GUI.pm blib/lib/ZConf/GUI.pm Manifying blib/man3/ZConf::GUI.3 VVELOX/ZConf-GUI-1.0.2.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 /home/cpanfly/ap1003/bin/perl-static "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Failed test 'use ZConf::GUI;' # at t/00-load.t line 6. # Tried to use 'ZConf::GUI'. # Error: Can't locate ZConf.pm in @INC (@INC contains: /home/cpanfly/var/cpan/build/ZConf-GUI-1.0.2-7rqD69/blib/lib /home/cpanfly/var/cpan/build/ZConf-GUI-1.0.2-7rqD69/blib/arch /home/cpanfly/var/megalib /home/cpanfly/ap1003/site/lib /home/cpanfly/ap1003/lib) at /home/cpanfly/var/cpan/build/ZConf-GUI-1.0.2-7rqD69/blib/lib/ZConf/GUI.pm line 6. # BEGIN failed--compilation aborted at /home/cpanfly/var/cpan/build/ZConf-GUI-1.0.2-7rqD69/blib/lib/ZConf/GUI.pm line 6. # Compilation failed in require at (eval 4) line 2. # BEGIN failed--compilation aborted at (eval 4) line 2. Use of uninitialized value $ZConf::GUI::VERSION in concatenation (.) or string at t/00-load.t line 9. # Testing ZConf::GUI , Perl 5.010000, /home/cpanfly/ap1003/bin/perl-static # Looks like you failed 1 test of 1. t/00-load.t ....... 1..1 not ok 1 - use ZConf::GUI; Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.t ... 1..3 ok 1 - README contains no boilerplate text # TODO Need to replace the boilerplate text ok 2 - Changes contains no boilerplate text # TODO Need to replace the boilerplate text ok 3 - lib/ZConf/GUI.pm contains no boilerplate text # TODO Need to replace the boilerplate text ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on ZConf::GUI ok t/pod.t ........... 1..1 ok 1 - blib/lib/ZConf/GUI.pm ok Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 1-3 Files=4, Tests=6, 0 wallclock secs ( 0.01 usr 0.02 sys + 0.17 cusr 0.13 csys = 0.33 CPU) Result: FAIL Failed 1/4 test programs. 1/6 subtests failed. make: *** [test_dynamic] Error 255 VVELOX/ZConf-GUI-1.0.2.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports VVELOX/ZConf-GUI-1.0.2.tar.gz Finished 2009-11-02T18:53:52