PATH=/usr/bin:/bin:/home/fly1400/cpanfly-5.14/var/megalib/bin Start 2016-06-07T12:00:49 ActivePerl-1400 CPAN-2.10 Reading '/home/fly1400/cpanfly-5.14/var/cpan/Metadata' Database was generated on Tue, 07 Jun 2016 05:17:03 GMT Checksum for /home/fly1400/cpanfly-5.14/var/cpan/sources/authors/id/B/BI/BINARY/Performance-Probability-0.03.tar.gz ok Performance-Probability-0.03/ Performance-Probability-0.03/LICENSE Performance-Probability-0.03/Makefile.PL Performance-Probability-0.03/README.md Performance-Probability-0.03/t/ Performance-Probability-0.03/t/performance_probability.t Performance-Probability-0.03/t/rc/ Performance-Probability-0.03/t/rc/.perltidyrc Performance-Probability-0.03/t/rc/.perlcriticrc Performance-Probability-0.03/t/test_contracts_0.csv Performance-Probability-0.03/t/perlcritic.t Performance-Probability-0.03/t/00-load.t Performance-Probability-0.03/META.json Performance-Probability-0.03/META.yml Performance-Probability-0.03/doc/ Performance-Probability-0.03/doc/PerformanceProbability.pdf Performance-Probability-0.03/doc/C&C_TimeOverlapBinaries.pdf Performance-Probability-0.03/lib/ Performance-Probability-0.03/lib/Performance/ Performance-Probability-0.03/lib/Performance/Probability.pm Performance-Probability-0.03/MANIFEST Performance-Probability-0.03/.travis.yml Configuring B/BI/BINARY/Performance-Probability-0.03.tar.gz with Makefile.PL >>> /home/fly1400/ap1400/bin/perl-static Makefile.PL Warning: prerequisite Math::BivariateCDF 0 not found. Checking if your kit is complete... Looks good Have /home/fly1400/cpanfly-5.14/var/megalib Want /home/fly1400/ap1400/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [i686-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Performance::Probability Writing MYMETA.yml and MYMETA.json BINARY/Performance-Probability-0.03.tar.gz /home/fly1400/ap1400/bin/perl-static Makefile.PL -- OK Running make for B/BI/BINARY/Performance-Probability-0.03.tar.gz ---- Unsatisfied dependencies detected during ---- ---- BINARY/Performance-Probability-0.03.tar.gz ---- Math::BivariateCDF [requires] Running test for module 'Math::BivariateCDF' Checksum for /home/fly1400/cpanfly-5.14/var/cpan/sources/authors/id/B/BI/BINARY/Math-BivariateCDF-0.02.tar.gz ok Math-BivariateCDF-0.02/ Math-BivariateCDF-0.02/BivariateCDF.xs Math-BivariateCDF-0.02/LICENSE Math-BivariateCDF-0.02/Makefile.PL Math-BivariateCDF-0.02/README.md Math-BivariateCDF-0.02/ppport.h Math-BivariateCDF-0.02/t/ Math-BivariateCDF-0.02/t/Math-BivariateCDF.t Math-BivariateCDF-0.02/META.json Math-BivariateCDF-0.02/toms462.h Math-BivariateCDF-0.02/META.yml Math-BivariateCDF-0.02/Changes Math-BivariateCDF-0.02/lib/ Math-BivariateCDF-0.02/lib/Math/ Math-BivariateCDF-0.02/lib/Math/BivariateCDF.pm Math-BivariateCDF-0.02/MANIFEST Math-BivariateCDF-0.02/.travis.yml Math-BivariateCDF-0.02/toms462.c Configuring B/BI/BINARY/Math-BivariateCDF-0.02.tar.gz with Makefile.PL >>> /home/fly1400/ap1400/bin/perl-static Makefile.PL Checking if your kit is complete... Looks good Have /home/fly1400/cpanfly-5.14/var/megalib Want /home/fly1400/ap1400/lib Your perl and your Config.pm seem to have different ideas about the architecture they are running on. Perl thinks: [megalib] Config says: [i686-linux-thread-multi] This may or may not cause problems. Please check your installation of perl if you have problems building this extension. Generating a Unix-style Makefile Writing Makefile for Math::BivariateCDF Writing MYMETA.yml and MYMETA.json BINARY/Math-BivariateCDF-0.02.tar.gz /home/fly1400/ap1400/bin/perl-static Makefile.PL -- OK Running make for B/BI/BINARY/Math-BivariateCDF-0.02.tar.gz >>> make cp lib/Math/BivariateCDF.pm blib/lib/Math/BivariateCDF.pm Running Mkbootstrap for Math::BivariateCDF () chmod 644 "BivariateCDF.bs" "/home/fly1400/ap1400/bin/perl-static" "/home/fly1400/cpanfly-5.14/var/megalib/ExtUtils/xsubpp" -typemap "/home/fly1400/ap1400/lib/ExtUtils/typemap" BivariateCDF.xs > BivariateCDF.xsc && mv BivariateCDF.xsc BivariateCDF.c Please specify prototyping behavior for BivariateCDF.xs (see perlxs manual) gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-merge-constants -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/home/fly1400/ap1400/lib/CORE" BivariateCDF.c In file included from /home/fly1400/ap1400/lib/CORE/regexp.h:226, from /home/fly1400/ap1400/lib/CORE/perl.h:3443, from BivariateCDF.xs:2: /home/fly1400/ap1400/lib/CORE/op_reg_common.h:70: warning: `warn_unused_result' attribute directive ignored In file included from /home/fly1400/ap1400/lib/CORE/perl.h:3443, from BivariateCDF.xs:2: /home/fly1400/ap1400/lib/CORE/regexp.h:306: warning: `warn_unused_result' attribute directive ignored In file included from /home/fly1400/ap1400/lib/CORE/perl.h:5040, from BivariateCDF.xs:2: /home/fly1400/ap1400/lib/CORE/proto.h:32: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:36: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:42: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:106: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:117: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:133: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:139: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:161: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:183: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:188: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:191: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:194: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:253: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:257: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:262: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:265: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:268: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:271: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:280: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:286: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:292: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:298: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:304: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:310: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:316: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:322: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:347: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:353: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:359: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:365: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:371: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:377: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:383: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:389: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:395: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:401: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:407: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:413: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:419: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:425: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:431: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:437: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:443: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:449: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:455: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:461: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:467: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:473: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:479: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:485: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:491: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:497: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:503: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:509: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:515: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:521: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:527: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:533: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:539: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:545: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:551: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:570: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:595: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:601: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:628: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:665: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:803: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:824: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:856: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:865: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:933: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:955: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:960: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1016: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1034: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1043: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1047: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1051: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1055: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1059: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1068: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1099: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1116: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1127: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1226: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1278: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1297: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1358: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1364: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1376: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1384: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1391: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1412: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1418: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1429: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1440: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1480: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1486: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1500: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1505: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1509: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1513: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1517: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1521: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1525: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1529: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1533: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1537: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1541: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1545: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1549: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1553: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1557: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1561: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1565: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1569: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1573: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1577: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1581: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1585: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1589: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1593: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1597: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1601: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1605: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1609: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1613: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1619: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1625: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1631: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1637: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1643: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1649: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1655: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1661: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1667: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1673: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1679: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1685: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1696: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1702: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1708: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1714: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1720: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1726: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1732: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1738: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1744: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1750: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1756: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1762: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1768: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1789: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1795: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1801: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1807: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:1879: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2193: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2220: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2223: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2410: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2414: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2419: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2428: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2434: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2439: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2446: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2451: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2459: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2471: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2477: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2482: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2492: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2498: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2506: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2512: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2519: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2525: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2529: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2533: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2537: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2546: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2552: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2559: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2566: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2572: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2576: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2581: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2586: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2593: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2599: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2603: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2607: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2611: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2615: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2619: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2625: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2631: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2635: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2639: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2648: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2652: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2656: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2661: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2667: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2690: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2700: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2721: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2727: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2739: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2804: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2808: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2823: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2921: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2928: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:2990: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3125: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3180: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3185: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3189: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3379: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3383: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3387: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3392: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3399: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3408: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3504: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3516: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3718: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3726: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3804: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3807: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:3902: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4046: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4054: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4231: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4241: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4251: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4329: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4336: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4344: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:4426: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:6983: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:6996: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7002: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7008: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7019: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7025: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7031: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7037: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7050: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7056: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7092: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7100: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7106: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7112: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7151: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7154: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7167: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7170: warning: `warn_unused_result' attribute directive ignored /home/fly1400/ap1400/lib/CORE/proto.h:7173: warning: `warn_unused_result' attribute directive ignored gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DUSE_SITECUSTOMIZE -DPERL_RELOCATABLE_INCPUSH -fno-merge-constants -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/home/fly1400/ap1400/lib/CORE" toms462.c rm -f blib/arch/auto/Math/BivariateCDF/BivariateCDF.so gcc -shared -O2 BivariateCDF.o toms462.o -o blib/arch/auto/Math/BivariateCDF/BivariateCDF.so \ -lm \ chmod 755 blib/arch/auto/Math/BivariateCDF/BivariateCDF.so "/home/fly1400/ap1400/bin/perl-static" -MExtUtils::Command::MM -e 'cp_nonempty' -- BivariateCDF.bs blib/arch/auto/Math/BivariateCDF/BivariateCDF.bs 644 Manifying 1 pod document BINARY/Math-BivariateCDF-0.02.tar.gz make -- OK Running make test >>> make test TEST_VERBOSE=1 Running Mkbootstrap for Math::BivariateCDF () chmod 644 "BivariateCDF.bs" PERL_DL_NONLAZY=1 "/home/fly1400/ap1400/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t t/Math-BivariateCDF.t .. 1..26 ok 1 - use Math::BivariateCDF; ok 2 - bivnor(0.036412293026205, 0.0708220179920969, 0.734208757779421)==0.359905409368831 ok 3 - bivnor(0.0428644207825943, 0.0296545938209543, 0.728868986855662)==0.365580183936228 ok 4 - bivnor(0.11600171033121, 0.11910582322574, 0.0327868852459016)==0.210548171202747 ok 5 - bivnor(0.0457753351073424, 0.0851617402785732, 0.0476190476190476)==0.23207199556715 ok 6 - bivnor(0.0851617402785732, 0.0785845483694907, 0.0314970394174356)==0.22341742255267 ok 7 - bivnor(0.182767776685671, 0.178099689500809, -0.0650428000487437)==0.173514838316166 ok 8 - bivnor(0.0469359135524636, 0.0184700101336557, 0.0327868852459016)==0.242307532823671 ok 9 - bivnor(0.0220997747855169, -0.0589371837001702, 0.0487821000365578)==0.264885758960159 ok 10 - bivnor(0.0606970490116174, 0.0550001000332323, 0.0325214000243719)==0.232625228275984 ok 11 - bivnor(0.0269070244506482, 0.0492506194103846, 0.0327868852459016)==0.240235193036092 ok 12 - bivnor(0.048094339155653, 0.0515567736550362, 0.0327868852459016)==0.235731423130852 ok 13 - bivnor(0.0492506194103846, 0.0387662301741831, 0.0483870967741935)==0.240442034750273 ok 14 - bivnor(0.0446125962878241, 0.0515567736550362, 0.0322622612330552)==0.236314130607731 ok 15 - bivnor(0.0281031001489114, 0.0492506194103846, 0.0161311306165276)==0.237358405269748 ok 16 - bivnor(-0.01007806638658, 0.0328647019283641, 0.0163934426229508)==0.248010831899286 ok 17 - bivnor(0.017255409833983, 0.017255409833983, 0.0162607000121859)==0.245751133155961 ok 18 - bivnor(0.017255409833983, -0.103026886627233, 0.0325214000243719)==0.271938906013812 ok 19 - bivnor(0.0504047617714123, 0.0304884250035562, 0.0163934426229508)==0.236718506870204 ok 20 - bivnor() doesn not cause exception ok 21 - bivnor() doesn not cause exception ok 22 - bivnor() doesn not cause exception ok 23 - r less than -1 causes exception ok 24 - r greater than 1 causes exception ok 25 - Argument is not numeric warning ok 26 - no (unexpected) warnings (via done_testing) ok All tests successful. Files=1, Tests=26, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.04 cusr 0.01 csys = 0.07 CPU) Result: PASS BINARY/Math-BivariateCDF-0.02.tar.gz make test TEST_VERBOSE=1 -- OK Fetching with LWP: http://ppm.activestate.com/CPAN/authors/id/B/BI/BINARY/CHECKSUMS Binary.com <binary@cpan.org> Perl extension for Bivariate CDF functions. >>> (cd /home/fly1400/cpanfly-5.14/var/cpan/build/Math-BivariateCDF-0.02-8B3LlL && tar cvf - Math-BivariateCDF-0.02.ppd blib) | gzip -c >/home/fly1400/cpanfly-5.14/var/REPO/B/BI/BINARY/Math-BivariateCDF-0.02.tar.gz Math-BivariateCDF-0.02.ppd blib/ blib/lib/ blib/lib/Math/ blib/lib/Math/BivariateCDF.pm blib/arch/ blib/arch/auto/ blib/arch/auto/Math/ blib/arch/auto/Math/BivariateCDF/ blib/arch/auto/Math/BivariateCDF/BivariateCDF.so blib/man3/ blib/man3/Math::BivariateCDF.3 >>> mv /home/fly1400/cpanfly-5.14/var/cpan/build/Math-BivariateCDF-0.02-8B3LlL/Math-BivariateCDF-0.02.ppd /home/fly1400/cpanfly-5.14/var/REPO/B/BI/BINARY BINARY/Performance-Probability-0.03.tar.gz Has already been unwrapped into directory /home/fly1400/cpanfly-5.14/var/cpan/build/Performance-Probability-0.03-ppjptk BINARY/Performance-Probability-0.03.tar.gz Has already been prepared Running make for B/BI/BINARY/Performance-Probability-0.03.tar.gz Prepending /home/fly1400/cpanfly-5.14/var/cpan/build/Math-BivariateCDF-0.02-8B3LlL/blib/arch /home/fly1400/cpanfly-5.14/var/cpan/build/Math-BivariateCDF-0.02-8B3LlL/blib/lib to PERL5LIB for 'make' >>> make cp lib/Performance/Probability.pm blib/lib/Performance/Probability.pm Manifying 1 pod document BINARY/Performance-Probability-0.03.tar.gz make -- OK Prepending /home/fly1400/cpanfly-5.14/var/cpan/build/Math-BivariateCDF-0.02-8B3LlL/blib/arch /home/fly1400/cpanfly-5.14/var/cpan/build/Math-BivariateCDF-0.02-8B3LlL/blib/lib to PERL5LIB for 'test' Running make test >>> make test TEST_VERBOSE=1 PERL_DL_NONLAZY=1 "/home/fly1400/ap1400/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t # Testing Performance::Probability 0.03, Perl 5.014000, /home/fly1400/ap1400/bin/perl-static t/00-load.t .................. 1..1 ok 1 - use Performance::Probability; ok t/performance_probability.t .. # Subtest: performance_probability ok 1 - Performance probability calculation. 1..1 ok 1 - performance_probability 1..1 ok # Failed test 'Test::Perl::Critic for "blib/lib/Performance/Probability.pm"' # at /home/fly1400/cpanfly-5.14/var/megalib/Test/Perl/Critic.pm line 104. # # Variable, subroutine, and package names have to be in CamelCase at line 15, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 48, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 50, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 51, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 53, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 57, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 58, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 58, column 23. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 58, column 23. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 58, column 39. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 58, column 39. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 59, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 59, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 62, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 66, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 68, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 69, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 73, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 74, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 74, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 74, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 77, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 81, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 83, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 84, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 86, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 90, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 91, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 91, column 22. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 91, column 22. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 91, column 44. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 91, column 44. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 92, column 14. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 92, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 95, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 99, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 101, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 102, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 103, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 106, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 108, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 109, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 109, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 109, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 109, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 109, column 36. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 109, column 36. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 109, column 50. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 109, column 50. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 109, column 67. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 109, column 67. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 112, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 116, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 118, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 119, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 120, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 122, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 125, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 16. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 25. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 126, column 25. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 41. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 126, column 41. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 56. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 126, column 56. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 126, column 77. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 126, column 77. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 129, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 134, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 9. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 34. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 47. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 55. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 60. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 136, column 65. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 139, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 141, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 142, column 29. (no explanation). (Severity: 5) # Use of low precedence operators is not allowed at line 143, column 26. Replace low precedence operators with the high precedence substitutes. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 143, column 30. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 143, column 30. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 143, column 51. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 143, column 51. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 31. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 41. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 146, column 50. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 147, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 147, column 28. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 147, column 28. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 148, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 148, column 28. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 148, column 28. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 149, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 149, column 28. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 149, column 28. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 150, column 17. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 150, column 28. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 150, column 28. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 152, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 152, column 38. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 152, column 38. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 152, column 57. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 152, column 57. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 152, column 78. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 152, column 78. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 152, column 98. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 152, column 98. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 153, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 153, column 38. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 153, column 38. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 153, column 58. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 153, column 58. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 153, column 78. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 153, column 78. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 153, column 98. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 153, column 98. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 154, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 154, column 38. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 154, column 56. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 156, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 160, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 160, column 53. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 160, column 53. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 160, column 72. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 160, column 72. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 161, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 161, column 53. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 161, column 53. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 161, column 72. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 161, column 72. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 163, column 24. (no explanation). (Severity: 5) # Subroutine "inv_cdf" not exported by "Math::Gauss::XS" at line 163, column 42. Violates encapsulation. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 163, column 67. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 163, column 67. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 164, column 24. (no explanation). (Severity: 5) # Subroutine "inv_cdf" not exported by "Math::Gauss::XS" at line 164, column 42. Violates encapsulation. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 164, column 67. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 164, column 67. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 166, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 166, column 35. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 166, column 55. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 166, column 88. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 168, column 25. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 168, column 25. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 168, column 41. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 168, column 41. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 169, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 169, column 41. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 172, column 25. (no explanation). (Severity: 5) # Use of low precedence operators is not allowed at line 172, column 39. Replace low precedence operators with the high precedence substitutes. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 172, column 42. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 24. (no explanation). (Severity: 5) # Subroutine "bivnor" not exported by "Math::BivariateCDF" at line 176, column 32. Violates encapsulation. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 59. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 70. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 176, column 81. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 178, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 26. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 34. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 179, column 34. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 46. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 179, column 46. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 60. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 179, column 60. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 72. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 179, column 72. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 86. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 179, column 86. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 179, column 98. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 179, column 98. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 181, column 21. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 181, column 35. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 181, column 49. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 187, column 12. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 196, column 1. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 198, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 200, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 200, column 15. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 200, column 15. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Use of low precedence operators is not allowed at line 202, column 9. Replace low precedence operators with the high precedence substitutes. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 202, column 21. (no explanation). (Severity: 5) # Found use of die. Use an exception instead at line 203, column 9. Exception objects should be used instead of the standard Perl error mechanism. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 207, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 207, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 207, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 208, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 208, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 208, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 209, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 209, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 209, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 210, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 210, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 210, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 211, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 211, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 211, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 212, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 212, column 24. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 212, column 24. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 214, column 30. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 214, column 54. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 214, column 75. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 214, column 92. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 214, column 114. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 214, column 138. (no explanation). (Severity: 5) # Found use of die. Use an exception instead at line 215, column 9. Exception objects should be used instead of the standard Perl error mechanism. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 219, column 25. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 220, column 13. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 220, column 13. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 220, column 32. (no explanation). (Severity: 5) # Private Member Data shouldn't be accessed directly at line 220, column 32. Accessing an objects data directly breaks encapsulation and should be avoided. Example: $object->{ some_key }. (Severity: 5) # Found use of die. Use an exception instead at line 221, column 13. Exception objects should be used instead of the standard Perl error mechanism. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 225, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 225, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 225, column 39. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 226, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 226, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 227, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 227, column 24. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 227, column 39. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 229, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 229, column 22. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 229, column 27. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 229, column 32. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 231, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 231, column 39. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 231, column 44. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 231, column 49. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 34. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 47. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 59. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 72. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 80. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 85. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 233, column 90. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 236, column 8. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 238, column 8. (no explanation). (Severity: 5) # Subroutine "machine_epsilon" is neither declared nor explicitly imported at line 238, column 19. This might be a major bug. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 240, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 240, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 240, column 20. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 241, column 5. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 241, column 13. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 241, column 28. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 241, column 41. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 241, column 62. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 241, column 77. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 243, column 5. (no explanation). (Severity: 5) # Subroutine "cdf" not exported by "Math::Gauss::XS" at line 243, column 19. Violates encapsulation. (Severity: 4) # Variable, subroutine, and package names have to be in CamelCase at line 243, column 40. (no explanation). (Severity: 5) # Variable, subroutine, and package names have to be in CamelCase at line 245, column 12. (no explanation). (Severity: 5) t/perlcritic.t ............... not ok - Test::Perl::Critic for "blib/lib/Performance/Probability.pm" 1..1 Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests Test Summary Report ------------------- t/perlcritic.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 Files=3, Tests=3, 7 wallclock secs ( 0.05 usr 0.02 sys + 3.18 cusr 0.39 csys = 3.64 CPU) Result: FAIL Failed 1/3 test programs. 1/3 subtests failed. make: *** [test_dynamic] Error 1 BINARY/Performance-Probability-0.03.tar.gz make test TEST_VERBOSE=1 -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports BINARY/Performance-Probability-0.03.tar.gz VmSize: 143640 kB Finished 2016-06-07T12:01:02