PATH=/usr/bin:/bin:/home/fly1400/cpanfly-5.14/var/megalib/bin
Start 2016-05-08T13:01:30
ActivePerl-1400 CPAN-2.10
Reading '/home/fly1400/cpanfly-5.14/var/cpan/Metadata'
Database was generated on Sat, 07 May 2016 04:53:41 GMT
Checksum for /home/fly1400/cpanfly-5.14/var/cpan/sources/authors/id/M/MA/MANWAR/Calendar-Persian-0.23.tar.gz ok
Calendar-Persian-0.23/
Calendar-Persian-0.23/t/
Calendar-Persian-0.23/t/manifest.t
Calendar-Persian-0.23/t/00-load.t
Calendar-Persian-0.23/t/pod.t
Calendar-Persian-0.23/t/01-calendar-persian.t
Calendar-Persian-0.23/lib/
Calendar-Persian-0.23/lib/Calendar/
Calendar-Persian-0.23/lib/Calendar/Persian.pm
Calendar-Persian-0.23/Makefile.PL
Calendar-Persian-0.23/README
Calendar-Persian-0.23/META.json
Calendar-Persian-0.23/LICENSE
Calendar-Persian-0.23/MANIFEST
Calendar-Persian-0.23/META.yml
Calendar-Persian-0.23/MANIFEST.SKIP
Calendar-Persian-0.23/Changes
Configuring M/MA/MANWAR/Calendar-Persian-0.23.tar.gz with Makefile.PL
>>> /home/fly1400/ap1400/bin/perl-static Makefile.PL
Warning: prerequisite Date::Persian::Simple 0.08 not found. We have 0.07.
Checking if your kit is complete...
Looks good
Have /home/fly1400/cpanfly-5.14/var/megalib
Want /home/fly1400/ap1400/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [i686-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Calendar::Persian
Writing MYMETA.yml and MYMETA.json
MANWAR/Calendar-Persian-0.23.tar.gz
/home/fly1400/ap1400/bin/perl-static Makefile.PL -- OK
Running make for M/MA/MANWAR/Calendar-Persian-0.23.tar.gz
---- Unsatisfied dependencies detected during ----
---- MANWAR/Calendar-Persian-0.23.tar.gz ----
Date::Persian::Simple [requires]
Running test for module 'Date::Persian::Simple'
Checksum for /home/fly1400/cpanfly-5.14/var/cpan/sources/authors/id/M/MA/MANWAR/Date-Persian-Simple-0.08.tar.gz ok
Date-Persian-Simple-0.08/
Date-Persian-Simple-0.08/t/
Date-Persian-Simple-0.08/t/01-date-persian-simple.t
Date-Persian-Simple-0.08/t/manifest.t
Date-Persian-Simple-0.08/t/00-load.t
Date-Persian-Simple-0.08/t/pod.t
Date-Persian-Simple-0.08/lib/
Date-Persian-Simple-0.08/lib/Date/
Date-Persian-Simple-0.08/lib/Date/Persian/
Date-Persian-Simple-0.08/lib/Date/Persian/Simple.pm
Date-Persian-Simple-0.08/Makefile.PL
Date-Persian-Simple-0.08/README
Date-Persian-Simple-0.08/META.json
Date-Persian-Simple-0.08/LICENSE
Date-Persian-Simple-0.08/MANIFEST
Date-Persian-Simple-0.08/META.yml
Date-Persian-Simple-0.08/MANIFEST.SKIP
Date-Persian-Simple-0.08/Changes
Configuring M/MA/MANWAR/Date-Persian-Simple-0.08.tar.gz with Makefile.PL
>>> /home/fly1400/ap1400/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /home/fly1400/cpanfly-5.14/var/megalib
Want /home/fly1400/ap1400/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [i686-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Date::Persian::Simple
Writing MYMETA.yml and MYMETA.json
MANWAR/Date-Persian-Simple-0.08.tar.gz
/home/fly1400/ap1400/bin/perl-static Makefile.PL -- OK
Running make for M/MA/MANWAR/Date-Persian-Simple-0.08.tar.gz
>>> make
cp lib/Date/Persian/Simple.pm blib/lib/Date/Persian/Simple.pm
Manifying 1 pod document
MANWAR/Date-Persian-Simple-0.08.tar.gz
make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1400/ap1400/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Date::Persian::Simple 0.08, Perl 5.014000, /home/fly1400/ap1400/bin/perl-static
t/00-load.t .................
1..1
ok 1 - use Date::Persian::Simple;
ok
t/01-date-persian-simple.t ..
1..18
ok 1
ok 2
ok 3
ok 4
ok 5
ok 6
ok 7
ok 8
ok 9
ok 10
ok 11
ok 12
ok 13
ok 14
ok 15
ok 16
ok 17
ok 18
ok
t/manifest.t ................
1..1
ok 1
ok
t/pod.t .....................
1..1
ok 1 - POD test for blib/lib/Date/Persian/Simple.pm
ok
All tests successful.
Files=4, Tests=21, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.44 cusr 0.02 csys = 0.48 CPU)
Result: PASS
MANWAR/Date-Persian-Simple-0.08.tar.gz
make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/M/MA/MANWAR/CHECKSUMS
Mohammad S Anwar <mohammad.anwar@yahoo.com>
Represents Persian date.
>>> (cd /home/fly1400/cpanfly-5.14/var/cpan/build/Date-Persian-Simple-0.08-tOguVh && tar cvf - Date-Persian-Simple-0.08.ppd blib) | gzip -c >/home/fly1400/cpanfly-5.14/var/REPO/M/MA/MANWAR/Date-Persian-Simple-0.08.tar.gz
Date-Persian-Simple-0.08.ppd
blib/
blib/lib/
blib/lib/Date/
blib/lib/Date/Persian/
blib/lib/Date/Persian/Simple.pm
blib/man3/
blib/man3/Date::Persian::Simple.3
>>> mv /home/fly1400/cpanfly-5.14/var/cpan/build/Date-Persian-Simple-0.08-tOguVh/Date-Persian-Simple-0.08.ppd /home/fly1400/cpanfly-5.14/var/REPO/M/MA/MANWAR
MANWAR/Calendar-Persian-0.23.tar.gz
Has already been unwrapped into directory /home/fly1400/cpanfly-5.14/var/cpan/build/Calendar-Persian-0.23-aedmKR
MANWAR/Calendar-Persian-0.23.tar.gz
Has already been prepared
Running make for M/MA/MANWAR/Calendar-Persian-0.23.tar.gz
Prepending /home/fly1400/cpanfly-5.14/var/cpan/build/Date-Persian-Simple-0.08-tOguVh/blib/arch /home/fly1400/cpanfly-5.14/var/cpan/build/Date-Persian-Simple-0.08-tOguVh/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Calendar/Persian.pm blib/lib/Calendar/Persian.pm
Manifying 1 pod document
MANWAR/Calendar-Persian-0.23.tar.gz
make -- OK
Prepending /home/fly1400/cpanfly-5.14/var/cpan/build/Date-Persian-Simple-0.08-tOguVh/blib/arch /home/fly1400/cpanfly-5.14/var/cpan/build/Date-Persian-Simple-0.08-tOguVh/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1400/ap1400/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# Testing Calendar::Persian 0.23, Perl 5.014000, /home/fly1400/ap1400/bin/perl-static
t/00-load.t ..............
1..1
ok 1 - use Calendar::Persian;
ok
t/01-calendar-persian.t ..
1..2
ok 1
ok 2
ok
t/manifest.t .............
1..1
ok 1
ok
t/pod.t ..................
1..1
ok 1 - POD test for blib/lib/Calendar/Persian.pm
ok
All tests successful.
Files=4, Tests=5, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.46 cusr 0.04 csys = 0.52 CPU)
Result: PASS
MANWAR/Calendar-Persian-0.23.tar.gz
make test TEST_VERBOSE=1 -- OK
Mohammad S Anwar <mohammad.anwar@yahoo.com>
Interface to Persian Calendar.
>>> (cd /home/fly1400/cpanfly-5.14/var/cpan/build/Calendar-Persian-0.23-aedmKR && tar cvf - Calendar-Persian-0.23.ppd blib) | gzip -c >/home/fly1400/cpanfly-5.14/var/REPO/M/MA/MANWAR/Calendar-Persian-0.23.tar.gz
Calendar-Persian-0.23.ppd
blib/
blib/lib/
blib/lib/Calendar/
blib/lib/Calendar/Persian.pm
blib/man3/
blib/man3/Calendar::Persian.3
>>> mv /home/fly1400/cpanfly-5.14/var/cpan/build/Calendar-Persian-0.23-aedmKR/Calendar-Persian-0.23.ppd /home/fly1400/cpanfly-5.14/var/REPO/M/MA/MANWAR
VmSize: 146536 kB
Finished 2016-05-08T13:01:40