PATH=/usr/bin:/bin:/home/fly1600/cpanfly-5.16/var/megalib/bin
Start 2016-05-15T06:05:53
ActivePerl-1600 CPAN-2.10
Reading '/home/fly1600/cpanfly-5.16/var/cpan/Metadata'
  Database was generated on Sun, 15 May 2016 04:29:02 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
Checksum for /home/fly1600/cpanfly-5.16/var/cpan/sources/authors/id/E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz ok
Task-Kensho-WebDev-0.39/
Task-Kensho-WebDev-0.39/Build.PL
Task-Kensho-WebDev-0.39/Changes
Task-Kensho-WebDev-0.39/lib/
Task-Kensho-WebDev-0.39/LICENSE
Task-Kensho-WebDev-0.39/Makefile.PL
Task-Kensho-WebDev-0.39/MANIFEST
Task-Kensho-WebDev-0.39/META.json
Task-Kensho-WebDev-0.39/META.yml
Task-Kensho-WebDev-0.39/README
Task-Kensho-WebDev-0.39/t/
Task-Kensho-WebDev-0.39/xt/
Task-Kensho-WebDev-0.39/xt/author/
Task-Kensho-WebDev-0.39/xt/release/
Task-Kensho-WebDev-0.39/xt/release/changes_has_content.t
Task-Kensho-WebDev-0.39/xt/release/cpan-changes.t
Task-Kensho-WebDev-0.39/xt/release/distmeta.t
Task-Kensho-WebDev-0.39/xt/release/minimum-version.t
Task-Kensho-WebDev-0.39/xt/release/portability.t
Task-Kensho-WebDev-0.39/xt/author/00-compile.t
Task-Kensho-WebDev-0.39/xt/author/clean-namespaces.t
Task-Kensho-WebDev-0.39/xt/author/eol.t
Task-Kensho-WebDev-0.39/xt/author/kwalitee.t
Task-Kensho-WebDev-0.39/xt/author/mojibake.t
Task-Kensho-WebDev-0.39/xt/author/no-tabs.t
Task-Kensho-WebDev-0.39/xt/author/pod-coverage.t
Task-Kensho-WebDev-0.39/xt/author/pod-spell.t
Task-Kensho-WebDev-0.39/xt/author/pod-syntax.t
Task-Kensho-WebDev-0.39/t/00-report-prereqs.dd
Task-Kensho-WebDev-0.39/t/00-report-prereqs.t
Task-Kensho-WebDev-0.39/lib/Task/
Task-Kensho-WebDev-0.39/lib/Task/Kensho/
Task-Kensho-WebDev-0.39/lib/Task/Kensho/WebDev.pm
Configuring E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz with Makefile.PL
>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Warning: prerequisite Task::Catalyst 0 not found.
Checking if your kit is complete...
Looks good
Have /home/fly1600/cpanfly-5.16/var/megalib
Want /home/fly1600/ap1600/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [i686-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Task::Kensho::WebDev
Writing MYMETA.yml and MYMETA.json
  ETHER/Task-Kensho-WebDev-0.39.tar.gz
  /home/fly1600/ap1600/bin/perl-static Makefile.PL -- OK
Running make for E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
---- Unsatisfied dependencies detected during ----
----   ETHER/Task-Kensho-WebDev-0.39.tar.gz   ----
    Task::Catalyst [requires]
Running test for module 'Task::Catalyst'
Checksum for /home/fly1600/cpanfly-5.16/var/cpan/sources/authors/id/B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz ok
Task-Catalyst-4.02
Task-Catalyst-4.02/README
Task-Catalyst-4.02/Changes
Task-Catalyst-4.02/LICENSE
Task-Catalyst-4.02/dist.ini
Task-Catalyst-4.02/META.yml
Task-Catalyst-4.02/MANIFEST
Task-Catalyst-4.02/Makefile.PL
Task-Catalyst-4.02/t
Task-Catalyst-4.02/t/task-bogus.t
Task-Catalyst-4.02/lib/Task
Task-Catalyst-4.02/lib/Task/Catalyst.pm
Task-Catalyst-4.02/t/release-pod-syntax.t
Task-Catalyst-4.02/t/release-pod-coverage.t
Configuring B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz with Makefile.PL
>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Warning: prerequisite CatalystX::REPL 0 not found.
Checking if your kit is complete...
Looks good
Have /home/fly1600/cpanfly-5.16/var/megalib
Want /home/fly1600/ap1600/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [i686-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for Task::Catalyst
Writing MYMETA.yml and MYMETA.json
  BOBTFISH/Task-Catalyst-4.02.tar.gz
  /home/fly1600/ap1600/bin/perl-static Makefile.PL -- OK
Running make for B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz
---- Unsatisfied dependencies detected during ----
----    BOBTFISH/Task-Catalyst-4.02.tar.gz    ----
    CatalystX::REPL [requires]
Running test for module 'CatalystX::REPL'
Checksum for /home/fly1600/cpanfly-5.16/var/cpan/sources/authors/id/F/FL/FLORA/CatalystX-REPL-0.04.tar.gz ok
CatalystX-REPL-0.04
CatalystX-REPL-0.04/Changes
CatalystX-REPL-0.04/dist.ini
CatalystX-REPL-0.04/t
CatalystX-REPL-0.04/t/request.pl
CatalystX-REPL-0.04/t/basic.t
CatalystX-REPL-0.04/t/lib
CatalystX-REPL-0.04/t/lib/TestApp.pm
CatalystX-REPL-0.04/t/lib/TestApp/Controller
CatalystX-REPL-0.04/t/lib/TestApp/Controller/Foo.pm
CatalystX-REPL-0.04/lib/CatalystX
CatalystX-REPL-0.04/lib/CatalystX/REPL.pm
CatalystX-REPL-0.04/META.yml
CatalystX-REPL-0.04/LICENSE
CatalystX-REPL-0.04/README
CatalystX-REPL-0.04/t/release-pod-coverage.t
CatalystX-REPL-0.04/t/release-pod-syntax.t
CatalystX-REPL-0.04/Makefile.PL
CatalystX-REPL-0.04/MANIFEST
Configuring F/FL/FLORA/CatalystX-REPL-0.04.tar.gz with Makefile.PL
>>> /home/fly1600/ap1600/bin/perl-static Makefile.PL
Checking if your kit is complete...
Looks good
Have /home/fly1600/cpanfly-5.16/var/megalib
Want /home/fly1600/ap1600/lib
Your perl and your Config.pm seem to have different ideas about the
architecture they are running on.
Perl thinks: [megalib]
Config says: [i686-linux-thread-multi]
This may or may not cause problems. Please check your installation of perl
if you have problems building this extension.
Generating a Unix-style Makefile
Writing Makefile for CatalystX::REPL
Writing MYMETA.yml and MYMETA.json
  FLORA/CatalystX-REPL-0.04.tar.gz
  /home/fly1600/ap1600/bin/perl-static Makefile.PL -- OK
Running make for F/FL/FLORA/CatalystX-REPL-0.04.tar.gz
>>> make
cp lib/CatalystX/REPL.pm blib/lib/CatalystX/REPL.pm
Manifying 1 pod document
  FLORA/CatalystX-REPL-0.04.tar.gz
  make -- OK
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/basic.t ................. 
1..5
ok 1 - expect_run
ok 2
ok 3 - in the REPL
ok 4
ok 5 - exception in controller action
ok
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
All tests successful.
Files=3, Tests=5,  2 wallclock secs ( 0.03 usr  0.00 sys +  1.70 cusr  0.08 csys =  1.81 CPU)
Result: PASS
  FLORA/CatalystX-REPL-0.04.tar.gz
  make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/F/FL/FLORA/CHECKSUMS
<SOFTPKG NAME="CatalystX-REPL" VERSION="0.04" DATE="2009-08-11">
  <AUTHOR CPAN="FLORA">Florian Ragwitz &lt;rafl@debian.org></AUTHOR>
  <ABSTRACT>read-eval-print-loop for debugging your Catalyst application</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.16"/>
  <CODEBASE HREF="CatalystX-REPL-0.04.tar.gz"/>
  <PROVIDE NAME="CatalystX::REPL" VERSION="0.04"/>
  <REQUIRE NAME="Carp::REPL"/>
  <REQUIRE NAME="Catalyst::" VERSION="5.800006"/>
  <REQUIRE NAME="namespace::autoclean"/>
  <!-- Built 2016-05-15 with ActivePerl-1600 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) log ../../../E/ET/ETHER/Task-Kensho-WebDev-0.39.d/log-20160515T060552.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2 && tar cvf - CatalystX-REPL-0.04.ppd blib) | gzip -c >/home/fly1600/cpanfly-5.16/var/REPO/F/FL/FLORA/CatalystX-REPL-0.04.tar.gz
CatalystX-REPL-0.04.ppd
blib/
blib/lib/
blib/lib/CatalystX/
blib/lib/CatalystX/REPL.pm
blib/man3/
blib/man3/CatalystX::REPL.3
>>> mv /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/CatalystX-REPL-0.04.ppd /home/fly1600/cpanfly-5.16/var/REPO/F/FL/FLORA
  BOBTFISH/Task-Catalyst-4.02.tar.gz
  Has already been unwrapped into directory /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc
  BOBTFISH/Task-Catalyst-4.02.tar.gz
  Has already been prepared
Running make for B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz
Prepending /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/arch /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Task/Catalyst.pm blib/lib/Task/Catalyst.pm
Manifying 1 pod document
  BOBTFISH/Task-Catalyst-4.02.tar.gz
  make -- OK
Prepending /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/arch /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/release-pod-coverage.t .. skipped: these tests are for release candidate testing
t/release-pod-syntax.t .... skipped: these tests are for release candidate testing
t/task-bogus.t ............ 
1..1
ok 1 - tasks need no tests, but CPAN clients demand them
ok
All tests successful.
Files=3, Tests=1,  0 wallclock secs ( 0.02 usr  0.01 sys +  0.07 cusr  0.01 csys =  0.11 CPU)
Result: PASS
  BOBTFISH/Task-Catalyst-4.02.tar.gz
  make test TEST_VERBOSE=1 -- OK
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/B/BO/BOBTFISH/CHECKSUMS
<SOFTPKG NAME="Task-Catalyst" VERSION="4.02" DATE="2011-08-22">
  <AUTHOR CPAN="BOBTFISH">Tomas Doran &lt;bobtfish@bobtfish.net></AUTHOR>
  <ABSTRACT>All you need to start with Catalyst</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.16"/>
  <CODEBASE HREF="Task-Catalyst-4.02.tar.gz"/>
  <PROVIDE NAME="Task::Catalyst" VERSION="4.02"/>
  <REQUIRE NAME="Catalyst::" VERSION="5.80"/>
  <REQUIRE NAME="Catalyst::Action::REST"/>
  <REQUIRE NAME="Catalyst::ActionRole::ACL"/>
  <REQUIRE NAME="Catalyst::Authentication::Credential::HTTP"/>
  <REQUIRE NAME="Catalyst::Authentication::Store::DBIx::Class"/>
  <REQUIRE NAME="Catalyst::Component::InstancePerContext"/>
  <REQUIRE NAME="Catalyst::Controller::ActionRole"/>
  <REQUIRE NAME="Catalyst::Devel" VERSION="1.26"/>
  <REQUIRE NAME="Catalyst::Manual" VERSION="5.80"/>
  <REQUIRE NAME="Catalyst::Model::Adaptor"/>
  <REQUIRE NAME="Catalyst::Model::DBIC::Schema"/>
  <REQUIRE NAME="Catalyst::Plugin::Authentication"/>
  <REQUIRE NAME="Catalyst::Plugin::ConfigLoader"/>
  <REQUIRE NAME="Catalyst::Plugin::I18N"/>
  <REQUIRE NAME="Catalyst::Plugin::Session"/>
  <REQUIRE NAME="Catalyst::Plugin::Session::State::Cookie"/>
  <REQUIRE NAME="Catalyst::Plugin::Session::Store::DBIC"/>
  <REQUIRE NAME="Catalyst::Plugin::Session::Store::File"/>
  <REQUIRE NAME="Catalyst::Plugin::StackTrace"/>
  <REQUIRE NAME="Catalyst::Plugin::Static::Simple"/>
  <REQUIRE NAME="Catalyst::Plugin::Unicode::Encoding"/>
  <REQUIRE NAME="Catalyst::View::Email"/>
  <REQUIRE NAME="Catalyst::View::TT"/>
  <REQUIRE NAME="CatalystX::Component::Traits"/>
  <REQUIRE NAME="CatalystX::LeakChecker"/>
  <REQUIRE NAME="CatalystX::Profile"/>
  <REQUIRE NAME="CatalystX::REPL"/>
  <REQUIRE NAME="CatalystX::SimpleLogin"/>
  <REQUIRE NAME="FCGI::"/>
  <REQUIRE NAME="FCGI::ProcManager"/>
  <REQUIRE NAME="Starman::"/>
  <REQUIRE NAME="Test::WWW::Mechanize::Catalyst"/>
  <REQUIRE NAME="local::lib"/>
  <!-- Built 2016-05-15 with ActivePerl-1600 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) log ../../../E/ET/ETHER/Task-Kensho-WebDev-0.39.d/log-20160515T060552.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc && tar cvf - Task-Catalyst-4.02.ppd blib) | gzip -c >/home/fly1600/cpanfly-5.16/var/REPO/B/BO/BOBTFISH/Task-Catalyst-4.02.tar.gz
Task-Catalyst-4.02.ppd
blib/
blib/lib/
blib/lib/Task/
blib/lib/Task/Catalyst.pm
blib/man3/
blib/man3/Task::Catalyst.3
>>> mv /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc/Task-Catalyst-4.02.ppd /home/fly1600/cpanfly-5.16/var/REPO/B/BO/BOBTFISH
  ETHER/Task-Kensho-WebDev-0.39.tar.gz
  Has already been unwrapped into directory /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Kensho-WebDev-0.39-sfZIdc
  ETHER/Task-Kensho-WebDev-0.39.tar.gz
  Has already been prepared
Running make for E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
Prepending /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc/blib/arch /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc/blib/lib /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/arch /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/lib to PERL5LIB for 'make'
>>> make
cp lib/Task/Kensho/WebDev.pm blib/lib/Task/Kensho/WebDev.pm
Manifying 1 pod document
  ETHER/Task-Kensho-WebDev-0.39.tar.gz
  make -- OK
Prepending /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc/blib/arch /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Catalyst-4.02-24HBRc/blib/lib /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/arch /home/fly1600/cpanfly-5.16/var/cpan/build/CatalystX-REPL-0.04-uPy4b2/blib/lib to PERL5LIB for 'test'
Running make test
>>> make test TEST_VERBOSE=1
PERL_DL_NONLAZY=1 "/home/fly1600/ap1600/bin/perl-static" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
# 
# Versions for all modules listed in MYMETA.json (including optional ones):
# 
# === Configure Requires ===
# 
#     Module               Want  Have
#     ------------------- ----- -----
#     Module::Build::Tiny 0.034 0.039
# 
# === Build Requires ===
# 
#     Module              Want Have
#     ------------------- ---- ----
#     ExtUtils::MakeMaker  any 7.04
# 
# === Test Requires ===
# 
#     Module           Want     Have
#     ---------------- ---- --------
#     File::Spec        any     3.62
#     Module::Metadata  any 1.000027
#     Test::More        any 1.001009
# 
# === Test Recommends ===
# 
#     Module         Want     Have
#     ---------- -------- --------
#     CPAN::Meta 2.120900 2.150005
# 
# === Runtime Requires ===
# 
#     Module                         Want    Have
#     ------------------------------ ---- -------
#     CGI::FormBuilder::Source::Perl  any    0.01
#     Dancer2                         any    0.03
#     HTML::FormHandler               any 0.40012
#     MIME::Types                     any    2.13
#     Mojolicious                     any    6.61
#     Plack                           any  1.0039
#     Task::Catalyst                  any    4.02
#     Template                        any    2.26
#     XML::Atom                       any    0.41
#     XML::RSS                        any    1.59
#     strict                          any    1.07
#     warnings                        any    1.13
# 
t/00-report-prereqs.t .. 
1..1
ok 1
ok
All tests successful.
Files=1, Tests=1,  0 wallclock secs ( 0.02 usr  0.00 sys +  0.32 cusr  0.00 csys =  0.34 CPU)
Result: PASS
  ETHER/Task-Kensho-WebDev-0.39.tar.gz
  make test TEST_VERBOSE=1 -- OK
<SOFTPKG NAME="Task-Kensho-WebDev" VERSION="0.39" DATE="2016-05-14">
  <AUTHOR CPAN="ETHER">Karen Etheridge &lt;ether@cpan.org></AUTHOR>
  <ABSTRACT>A Glimpse at an Enlightened Perl: Web Development</ABSTRACT>
  <ARCHITECTURE NAME="i686-linux-thread-multi-5.16"/>
  <CODEBASE HREF="Task-Kensho-WebDev-0.39.tar.gz"/>
  <PROVIDE NAME="Task::Kensho::WebDev" VERSION="0.39"/>
  <REQUIRE NAME="CGI::FormBuilder::Source::Perl"/>
  <REQUIRE NAME="Dancer2::"/>
  <REQUIRE NAME="HTML::FormHandler"/>
  <REQUIRE NAME="MIME::Types"/>
  <REQUIRE NAME="Mojolicious::"/>
  <REQUIRE NAME="Plack::"/>
  <REQUIRE NAME="Task::Catalyst"/>
  <REQUIRE NAME="Template::"/>
  <REQUIRE NAME="XML::Atom"/>
  <REQUIRE NAME="XML::RSS"/>
  <REQUIRE NAME="strict::"/>
  <REQUIRE NAME="warnings::"/>
  <!-- Built 2016-05-15 with ActivePerl-1600 on cpanfly-suse83 (SuSE Linux 8.2 (i586), glibc 2.3.2 stable) log Task-Kensho-WebDev-0.39.d/log-20160515T060552.txt -->
</SOFTPKG>
>>> (cd /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Kensho-WebDev-0.39-sfZIdc && tar cvf - Task-Kensho-WebDev-0.39.ppd blib) | gzip -c >/home/fly1600/cpanfly-5.16/var/REPO/E/ET/ETHER/Task-Kensho-WebDev-0.39.tar.gz
Task-Kensho-WebDev-0.39.ppd
blib/
blib/lib/
blib/lib/Task/
blib/lib/Task/Kensho/
blib/lib/Task/Kensho/WebDev.pm
blib/man3/
blib/man3/Task::Kensho::WebDev.3
>>> mv /home/fly1600/cpanfly-5.16/var/cpan/build/Task-Kensho-WebDev-0.39-sfZIdc/Task-Kensho-WebDev-0.39.ppd /home/fly1600/cpanfly-5.16/var/REPO/E/ET/ETHER
VmSize:	  149176 kB
Finished 2016-05-15T06:06:08